When scientists first discovered that atoms were composed of smaller particles, such as electrons, protons, and neutrons, they did not reject atomic theory because the experimental evidence supported the idea that atoms were still the fundamental building blocks of matter.
Instead of rejecting atomic theory, scientists modified it to incorporate the new information about the structure of atoms. For example, Ernest Rutherford's famous gold foil experiment in 1911 showed that atoms had a small, positively charged nucleus at their center, which was surrounded by negatively charged electrons.
This discovery led to the development of the modern model of the atom, which is still based on the idea that atoms are the smallest units of matter that retain the properties of an element. However, the model has been updated to reflect our current understanding of the subatomic particles that make up atoms.
To know more about atomic theories, here
brainly.com/question/28853813
#SPJ4
TRUE OR FALSE: THE LIMITING REAGENT CONTROLS A REACTION’S THEORETICAL YIELD, BUT A NUMBER OF SIDE REACTIONS MAY ALSO OCCUR, CAUSING THE ACTUAL YIELD TO VARY.
Answer:
True. The limiting reagent is the reactant that is completely consumed in a chemical reaction and limits the amount of product that can be formed. The theoretical yield is the maximum amount of product that can be obtained from the limiting reagent, assuming that the reaction goes to completion and no side reactions occur. However, in practice, it is common for side reactions to occur, which can reduce the actual yield of the product. Therefore, while the limiting reagent does control the theoretical yield of a reaction, the actual yield may vary due to the presence of side reactions or other factors that can affect the efficiency of the reaction.
Explanation:
What correlates with metallic behavior
Answer:
large atomic size and low ionization energy.
Explanation:
Metallic behavior correlates with large atomic size and low ionization energy. Thus, metallic behavior increases down a group and decreases from left to right across a period. Elements in Groups 1A(1) and 2A(2) are strong reducing agents; nonmetals in Groups 6A(16) and 7A(17) are strong oxidizing agents.
chromium metal has a binding energy of 7.21 x 10-19 j for certain electrons. what is the photon frequency needed to eject electrons with 2.2 x 10-19 j of energy?
To eject electrons with 2.2 x 10^-19 J of energy is 1.42 x 10^15 Hz.
what is the photon frequency needed? Chromium metal has a binding energy of 7.21 x 10^-19 J for certain electrons. So, the energy needed to eject the electrons is: Energy needed = Binding energy + Ejected electrons' energy = 7.21 x 10^-19 J + 2.2 x 10^-19 J = 9.41 x 10^-19 JNow, we know the energy needed to eject electrons is 9.41 x 10^-19 J. And we know that the energy of a photon is given by E = hν, where h is Planck's constant and ν is the frequency of the photon. To find the photon frequency needed, we can use the equation:
E = hνν = E/hν = (9.41 x 10^-19 J) / (6.63 x 10^-34 J·s)ν = 1.42 x 10^15 Hz
Hence, the photon frequency needed to eject electrons with 2.2 x 10^-19 J of energy is 1.42 x 10^15 Hz.
Learn more about photon frequency at brainly.com/question/30107923
#SPJ4
This portion of the titration curve of a strong base with a strong acid is the same as this region for a weak base titrated with a strong acid. a. the portion after all of the base has been neutralized
b. the endpoint pH c. the portion before the endpoint is reached d. the buffer region
The portion of the titration curve of a strong base with a strong acid is the same as the region before the endpoint is reached for a weak base titrated with a strong acid. The correct answer is Option C.
What is titration?Titration refers to the process of measuring the volume of one solution required to react with a given volume of another solution completely. The titration curve is a graph that shows the change in pH during a titration.
The pH changes quickly from acidic to basic as the volume of strong base added approaches the stoichiometric point. It can be observed that the pH of the strong base solution is high, but as it is titrated with an acid, its pH decreases. The graph gradually falls as the acid is added, finally reaching a sharp rise known as the equivalence point or endpoint. As a result, the correct option is c. the portion before the endpoint is reached.
Learn more about titration curve here: https://brainly.com/question/31030054
#SPJ11
which mineral property is associated with breaking on planes?
Cleravage is a characteristic of mineral that is related to breaking along planes. The tendency of a mineral to break along flat, even surfaces or planes is known as cleavage,
and it depends on how the atoms are arranged inside the crystal structure of the material. Well-defined cleavage planes in minerals make them more likely to break readily along them, resulting in smooth, flat surfaces with certain geometric forms. As many minerals have varied cleavage qualities, minerals may be distinguished by the quantity and direction of their cleavage planes. Mica minerals, for instance, have good basal cleavage, which means they frequently fracture along a single plane to form thin, flexible sheets. Calcite tends to break along three planes that cross at angles other than 90 degrees because it possesses rhombohedral cleavage.
learn more about mineral here:
https://brainly.com/question/18078524
#SPJ4
How much energy is given off by the following reaction, if 162. 5 g of oxygen reacts with
216. 7 g of ammonia (NH3)?
4 NH3 + 502 → 4 NO + 6H2O H = -1225. 6 kJ
4974.9 kJ of energy are released during the interaction between 162.5 g of O2 and 216.7 g of NH3.
The given chemical equation shows the reaction between ammonia (NH3) and oxygen (O2) to form nitrogen monoxide (NO) and water (H2O). The enthalpy change (ΔH) for this reaction is -1225.6 kJ per mole of O2 consumed.
To determine the energy given off by the reaction between 162.5 g of O2 and 216.7 g of NH3, we need to first determine the limiting reactant. This is the reactant that is completely consumed in the reaction and limits the amount of product formed.
To find the limiting reactant, we need to calculate the number of moles of each reactant. The molar mass of O2 is 32.00 g/mol, so 162.5 g of O2 is equivalent to 5.078 moles of O2. The molar mass of NH3 is 17.03 g/mol, so 216.7 g of NH3 is equivalent to 12.71 moles of NH3.
The stoichiometric ratio of O2 to NH3 is 5:4, meaning that for every 5 moles of O2 consumed, 4 moles of NH3 are required. From the above calculations, we can see that there is excess NH3 in this reaction since only 4.063 moles of O2 are required to react with 3.250 moles of NH3.
Therefore, the amount of O2 that reacts is 4.063 moles, and the energy given off by the reaction is:
ΔH = (-1225.6 kJ/mol) x (4.063 mol) = -4974.9 kJ
Therefore, the reaction between 162.5 g of O2 and 216.7 g of NH3 gives off 4974.9 kJ of energy.
To learn more about ammonia refer to:
brainly.com/question/14672082
#SPJ4
Phosphorus pentachloride decomposes to phosphorus trichloride and chlorine gas at elevated temperatures by the following reaction:
PCl5(g) PCl3(g) + Cl2(g). If Kc = 1.8 at 250°C, what is the value of Kp at the same temperature? Can someone show me how to get the answer?
Answer choices:
8.8 x 10-2
4.2 x 10-2
77
65
Phosphorus pentachloride decomposes to phosphorus trichloride and chlorine gas at elevated temperatures by the following reaction:
PCl5(g) PCl3(g) + Cl2(g).
If Kc = 1.8 at 250°C, the value of Kp at the same temperature is given as follows. The correct option is 65. (Option D)
Kc = {PCl3 * Cl2} / {PCl5}
At equilibrium;Kp = {PCl3} * {Cl2} / {PCl5}
Since the stoichiometry of the given chemical equation is 1:1:1, Kp = Kc. Kp = 1.8 at 250°C. Therefore the answer is 65
.According to the above data, the calculation of the value of Kp at the same temperature is as follows;
Kc = {PCl3 * Cl2} / {PCl5}1.8 = {PCl3 * Cl2} / {PCl5} (At 250°C)
Kp = {PCl3} * {Cl2} / {PCl5} (At 250°C)
Kp = KcKp = 1.8
Therefore, the correct answer is option D, which is 65.
Learn more about Kp at brainly.com/question/22074421
#SPJ11
In atrial fibrillation, the atria do not properly contract: Howv would this be apparent on an ECG? P waves would be reduced or absent T waves would be recluced or absent ORS waves would be reduced or absent
The key response is that P waves on an ECG would be diminished or absent in atrial fibrillation. An electrocardiogram (ECG), a test that gauges the electrical activity of the heart.
Atrial fibrillation causes uncontrolled electrical activity in the atria, which causes irregular and frequently rapid heartbeats. An electrocardiogram (ECG), a test that gauges the electrical activity of the heart, can identify this aberrant activity. Atrial fibrillation is characterised by the rapid and irregular fibrillation waves, which can be challenging to identify from the ventricle's T waves. Normally, atrial fibrillation is characterised by P waves, which represent the electrical activity of the atria. P waves are consequently frequently diminished or missing on an ECG in atrial fibrillation. Atrial fibrillation can be distinguished from other arrhythmias by the irregular QRS complexes and absence of P waves, which are characteristics of the condition.
learn more about atrial fibrillation here:
https://brainly.com/question/30414659
#SPJ4
The end point for a titration can be determined graphically. The end point volume for a second derivative plot corresponds to: . A) the volume titrant added where the second derivative curve crosses the x-axis. B) the volume titrant added where the second derivative curve has maximum slope. C) the volume titrant added where the second derivative curve crosses the y-axis. D) the volume titrant added where the second derivative curve has minimum slope. E) the volume titrant added where the second derivative curve has a maximum negative slope.
The volume titrant added where the second derivative curve has the greatest slope is the endpoint volume for a second derivative plot. The volume titrant added where the second derivative curve has the greatest slope, Option B, is the correct answer.
What is the Titration curve?The titration curve is a graphical representation of a chemical reaction where the stoichiometric quantity of one reactant is gradually added to another until the reaction reaches its endpoint.
The second derivative plot can be used to determine the endpoint of a titration. The second derivative is the rate of change of the slope of the titration curve. In the second derivative curve, the endpoint is recognized as the point with the maximum slope.
As a result, the end volume in a titration corresponds to the volume of titrant added where the second derivative curve has a maximum slope.
To know more about the titration curve:
https://brainly.com/question/14315454
#SPJ11
What is milk an example of?
O solution
O colloid
O suspension
O compound
Milk is an example of a colloid (option B).
What is a colloid?A colloid is an intimate mixture of two substances, one of which, called the dispersed phase.
A colloid is uniformly distributed in a finely divided state throughout the second substance, called the dispersion medium (or dispersing medium).
Milk is an example of a colloidal solution, where fat is the phase and water is the medium.
Learn more about colloid at: https://brainly.com/question/11640006
#SPJ1
Democritus and dalton both proposed that matter consists of atoms. How did their approaches to reaching that conclusion differ
Dalton employed the scientific method—reasoning based on the findings of experiments—whereas Democritus exclusively relied on his own logic and mental inferences.
Democritus developed his ideas about atoms by intellectual inquiry, whereas Dalton developed his ideas through experimentation and meticulous assessment. Democritus had no verifiable truths to support his beliefs and no means of testing them because he relied solely on ideas and did not conduct controlled tests.
Dalton tested his theories and took exact measurements to refine them. Democritus lacked empirical evidence to back up his beliefs and no way to test them because he relied solely on intellect and did not conduct scientific experiments.
To know more about Dalton's theory, visit,
https://brainly.com/question/17771833
#SPJ4
select the correct statements regarding a liquid-gas system at equilibrium that is disturbed by adding or removing vapor from the system (at constant temperature). select all that apply. multiple select question. A. adding vapor will cause a temporary increase in vapor pressure. B. adding or removing vapor will result in a new equilibrium vapor pressure. C. when equilibrium is reestablished after a disturbance in a liquid-gas system, the vapor pressure will be the same. D. removing vapor will cause a temporary increase in the rate of condensation.
A liquid-gas system at equilibrium is disturbed by adding or removing vapor from the system (at constant temperature). The correct statements for the vapor pressure regarding this situation are A, B, and D.
A. Adding vapor will cause a temporary increase in vapor pressure: When the vapor is added to the system, the total vapor pressure increases, and the vapor pressure in the system is greater than the original equilibrium vapor pressure until the system re-equilibrates.
B. Adding or removing vapor will result in a new equilibrium vapor pressure: The equilibrium vapor pressure will be affected by the addition or removal of vapor. When the vapor is added or removed, the system must reach a new equilibrium between the vapor and liquid phases before the vapor pressure returns to the original equilibrium value.
D. Removing vapor will cause a temporary increase in the rate of condensation: When the vapor is removed from the system, the total vapor pressure decreases, and the rate of condensation of the liquid phase will increase until the system re-equilibrates.
Statement C. when equilibrium is re-established after a disturbance in a liquid-gas system, the vapor pressure will be the same: is incorrect. When a system is disturbed by adding or removing vapor, the new equilibrium vapor pressure is different from the original equilibrium vapor pressure.
Therefore, the correct statements for the vapor pressure of the system are A, B, and D.
To know more about the vapor pressure, refer here:
https://brainly.com/question/11864750#
#SPJ11
Draw the atomic structure of sodium with its electronic configuration.
here you go. kindly check attatchement
Look at picture below
The Lewis dot structures for the polyatomic ions NH₄⁺, PO₄³⁻, NO₃⁻, CO₃²⁻ as well as the electron dot structures of the CH₂F₂ and OF₂ are shown in the attachment.
What are Lewis dot structures?Lewis dot structures or electron dot structures are diagrams that show the bonding between atoms in a molecule and the lone pairs of electrons that may exist in the molecule.
In these structures, the symbol of each element represents its atomic nucleus and inner-shell electrons, while dots or lines surrounding the symbol represent valence electrons that participate in bonding. The structures allow us to predict the number and type of bonds in a molecule and its shape, as well as to understand its chemical reactivity.
The shape and bond angles of the molecules CH₂F₂ and OF₂ can be determined using VSEPR theory:
CH₂F₂:
The central atom, carbon (C), has four electron groups (two single bonds to hydrogen and two single bonds to fluorine).
The electron geometry is tetrahedral, and the molecular geometry is also tetrahedral.
The bond angles are approximately 109.5 degrees.
OF₂:
The central atom, oxygen (O), has two electron groups (one double bond to fluorine and two lone pairs of electrons).
The electron geometry is tetrahedral, and the molecular geometry is bent.
The bond angle is approximately 103 degrees.
Learn more about Lewis dot structures at: https://brainly.com/question/20300458
#SPJ1
the principles which underlie balancing chemical equations include
The principles that underlie balancing chemical equations include the law of conservation of mass and the concept of stoichiometry.
The law of conservation of mass states that matter can neither be created nor destroyed in a chemical reaction, meaning that the total mass of the reactants must be equal to the total mass of the products. This principle requires that the number of atoms of each element on the reactant side of the equation must be equal to the number of atoms of that element on the product side. The concept of stoichiometry involves using the balanced equation to determine the quantitative relationships between the reactants and products, including the amounts of each substance involved in the reaction.
To know more about stoichiometry, here
brainly.com/question/9743981
#SPJ4
--The complete question is, The principles that underlie balancing chemical equations include the______________ and the concept of stoichiometry. ---
Consider the molecular structure for linuron, an herbicide, provided in the questions below. a) What is the electron domain geometry around nitrogen-1? b) What is the hybridization around carbon-1? c) What are the ideal bond angles > around oxygen-1? d) Which hybrid orbitals overlap to form the sigma bond between oxygen-1 and nitrogen-2? e) How many pi bonds are in the molecule?
Answer:
a)Electron domain geometry around nitrogen-1 is tetrahedral
b)Hybridization around carbon-1 is sp2
c)The ideal bond angles around oxygen-1 are 120 degrees.
d)Hybrid orbitals overlapping to form the sigma bond between oxygen-1 and nitrogen-2 is sp2 hybrid orbitals from carbon-1 and nitrogen-2
e)There are no pi bonds in the molecule.
Explanation:
a) Electron domain geometry around nitrogen-1 is tetrahedral.The molecular structure of linuron is as follows: There are three carbon atoms in a row. The terminal carbon atom is linked to a methyl group and a chlorine atom. The carbon atom next to it is linked to the nitrogen atom in the herbicide. The third carbon atom is linked to two oxygen atoms, with one of them being a hydroxyl group.
b) Hybridization around carbon-1 is sp2.The carbon atom adjacent to the nitrogen atom is known as carbon-1. This carbon atom is joined to three other atoms. It has an sp2 hybridization since it has three regions of electron density.
c) The ideal bond angles around oxygen-1 are 120 degrees.Bond angles are the angles between two adjacent lines in a Lewis structure. Because oxygen-1 is linked to two other atoms, it has a bent geometry. Its ideal bond angle is 120 degrees.
d) Hybrid orbitals overlapping to form the sigma bond between oxygen-1 and nitrogen-2 is sp2 hybrid orbitals from carbon-1 and nitrogen-2.The sigma bond is the strongest type of covalent bond. Sigma bonds are created when the overlapping orbitals are arranged in a straight line. The sigma bond between oxygen-1 and nitrogen-2 is formed by the overlap of sp2 hybrid orbitals from carbon-1 and nitrogen-2.
e) There are no pi bonds in the molecule.There are no pi bonds in the molecule because all of the bonds are sigma bonds. The molecule consists of single bonds only.
To know more tetrahedral. about refer here: https://brainly.com/question/18612295#
#SPJ11
which solutes are reabsorbed from the nephron loop? select all that apply. a) sodium loops b) glucose and amino acids c) chloride d) water e) potassium ions.
The right response is either Sodium ions or Chloride ions. sodium ions and chloride ions are the proper solutes that are reabsorbed from the nephron loop.
Reabsorbing water and specific dissolved substances from the glomerular filtrate is carried out by the nephron loop, also referred to as the loop of Henle. While the ascending leg of the nephron loop is impermeable to water, it actively reabsorbs sodium and chloride ions. The descending limb of the nephron loop is permeable to water. While the reabsorption of water is controlled throughout the nephron, particularly in the collecting duct, the reabsorption of glucose, amino acids, and potassium ions occurs primarily in the proximal convoluted tubule. Consequently, sodium ions and chloride ions are the proper solutes that are reabsorbed from the nephron loop.
learn more about Sodium ions here:
https://brainly.com/question/29704319
#SPJ4
12. MnO4 + A. B. From the equation below, which is oxidizing agent Mn²+ C. D. SO₂ - MnO4 SO₂ Mn²+ 2 SO4² + SO
MnO4- acts as an oxidizing agent, whereas SO2 acts as a reducing agent.
What is oxidising agent?An oxidizing agent is a chemical species that causes oxidation in another substance by receiving electrons from it. To put it another way, it is a chemical that makes it easier for electrons to move from the object being oxidized to itself.
When an oxidation occurs, electrons are lost or the oxidation state is increased; when a reduction occurs, electrons are gained or the oxidation state is decreased.
In this equation, MnO4- + SO2 + H2O → Mn2+ + SO42- + 2H+
Because it causes SO2 to undergo oxidation (i.e., lose electrons) and goes through reduction itself, MnO4- is the oxidizing agent in this equation (i.e., gains electrons).
Due of its ability to both reduce MnO4- and oxidize itself, SO2 is the reducing agent.
Mn2+ is not an oxidizing agent because it is the end result of the reduction of MnO4-.
As SO42- is a byproduct of SO2 oxidation, it cannot act as a reducing agent.
MnO4- is therefore the oxidizing agent, whereas SO2 is the reducing agent.
To know more about oxidising agent, visit:
https://brainly.com/question/30281967
#SPJ1
if 120 ml of a 1.2 m glucose solution is diluted to 550.0 ml , what is the molarity of the diluted solution?
The molarity of the diluted solution is 0.2618 M.
The molarity of the diluted solution can be calculated using the formula:
M₁V₁ = M₂V₂,
where M₁ is the initial molarity, V₁ is the initial volume, M₂ is the new molarity, and V₂ is the new volume.
In this case:
M₁ = 1.2 MM₂ is unknown (the number that we're calculating for).V₁ = 120 mlV₂ = 550 mlPlug these numbers into the formula to calculate the molarity of the diluted solution (M₂):
M₁V₁ = M₂V₂,
1.2 * 120 = M₂ * 550
M₂ = 0.26181...
M₂ = 0.2618 M (rounded to four significant figures).
Learn more about molarity at https://brainly.com/question/26873446
#SPJ11
what are the intensity of the ir absorption bands proportional to?
The intensity of the infrared (IR) absorption bands is proportional to the amount of a particular functional group present in a molecule.
IR spectroscopy is a powerful technique used to study the vibrations of chemical bonds in molecules. When a molecule absorbs IR radiation, its chemical bonds are excited and vibrate in different ways, resulting in characteristic absorption bands that can be used to identify the functional groups present in the molecule.
The intensity of these bands is proportional to the number of bonds of a particular functional group that absorb IR radiation, as well as the strength of these bonds. Therefore, the intensity of the IR absorption bands provides information about the composition and structure of a molecule, allowing researchers to identify and study its chemical properties.
To learn more about IR absorption bands refer to:
brainly.com/question/30883408
#SPJ4
True or false? Zeolites do not have large surface areas; instead, they have cage-like empty space.
Answer: False
Explanation:
Select the net ionic equation for the reaction that occurs when sodium chloride and acetic acid are mixed. A. No reaction occurs B. Na+ (aq) + Cl(aq) + (aq) + CH,02(aq) Na+ (aq) + CH,O2 (aq) + HCI(I) C. H(aq) + Cl(aq) HC19) Na* (aq) + CI+ (aq) + HC,H,O3(aq) — D. Na+ (aq) + CH302" (aq) + HC1(9) H(aq) + Cl(aq) - HCl(U) E. Na (aq) + C,H,O, (09) NaC,H,O2(9)
Option A is correct in this case that no reaction occurs between sodium chloride and acetic acid when mixed because acetic acid is a very weak acid, and it is unable to shift the ions of the salt.
Comparatively, the molecular equation provides information on the ionic molecules that served as the reaction's ion sources whereas the entire ionic equation provides information on all of the ions that were in solution during the reaction.
Even at greater temperatures, there is little probability that acetic acid and table salt will react in any way. Acetic acid is a relatively weak acid, while sodium chloride is a salt of hydrochloric acid, a strong acid. In most cases, a weaker acid does not displace a stronger acid from the salt of the latter.
Hence, when you combine acetic acid with sodium chloride, you only obtain a uniform, transparent combination. Equilibrium is shifted to the left side of the reaction as follows:
Na⁺Cl⁻ + CH₃COOH ⇄ H⁺Cl⁻ + CH₃COO⁻Na⁺
To know more about net ionic equation, refer:
https://brainly.com/question/14581128
#SPJ4
Correct question is:
Select the net ionic equation for the reaction that occurs when sodium chloride and acetic acid are mixed.
(Refer the image for the correct options)
What do you think the molar mass of 2. 000 moles of carbon will be
The molar mass of 2.000 moles of carbon is 24.02 g/mol.
Molar mass is the total mass in grams of all the atoms in one mole of a substance. The unit of molar mass is grams per mole (g/mol).
The molar mass of carbon is 12.01 g/mol.
The formula for molar mass calculation is as follows:
Molar mass = Mass of substance ÷ Amount of substance
Molar mass can also be calculated using the periodic table of elements.
To calculate the molar mass of 2.000 moles of carbon, you can use the following formula:
mass = moles x molar mass
mass = 2.000 mol x 12.01 g/mol
mass = 24.02 g
For more such questions on Molar mass, click on:
https://brainly.com/question/30459977
#SPJ11
Course Activity: Finding Evidence of Force Helds
it For
are
Part C
Consider this question posed at the beginning of the task:
Do two magnets create magnetic force fields that allow them to interact without touching?
Did the investigation answer the question? Explain whether the investigation gave enough evidence to support the idea
that invisible magnetic force fields exist.
ments
B
X х
Font Sizes
A- A - EE 3
Characters used: 0 / 15000
Yes, the investigation did answer the question about whether two magnets create magnetic force fields that allow them to interact without touching. The investigation provided enough evidence to support the idea that invisible magnetic force fields exist.
The investigation provided enough evidence to support the idea that invisible magnetic force fields exist:
The investigation involved observing how two magnets interact with each other without touching. The magnets were brought closer together until they interacted, and then they were moved further apart. This process was repeated several times, and the results were observed and recorded. During the investigation, it was observed that the magnets interacted with each other even when they were not touching. This interaction occurred because the magnets created magnetic force fields that allowed them to interact with each other even when they were not in direct contact.The observation of the interaction between the magnets provided enough evidence to support the idea that invisible magnetic force fields exist. This is because the interaction between the magnets could not be explained by any other means except through the existence of magnetic force fields. Therefore, the investigation gave enough evidence to support the idea that invisible magnetic force fields exist.
For more such questions on magnetic force, click on:
https://brainly.com/question/27949286
#SPJ11
a solution of was heated at for several hours. after some time the concentration of was determined. answer the following questions: a) what is the maximum amount of work ( ) from/for this reaction when ?
The maximum amount of work from/for this reaction a solution of was heated at for several hours is -8.69 KJ.
What is solution ?A solution is a type of homogeneous mixture composed of two or more substances in chemistry. A solute in such a mixture is a substance that has been dissolved in another substance known as a solvent. If the attractive forces between the solvent and solute particles are stronger than the attractive forces holding the solute particles together, the solvent particles separate and surround the solute particles. These encircled solute particles then move away from the solid solute and into solution. The mixing of a solution occurs at a scale where the effects of chemical polarity are involved, resulting in solvation-specific interactions. When the solvent is the greater fraction of the solution, the solution usually has the state of the solvent.
using the formula
ΔG = ΔG° + RT ln(Q)
Work done = -8.69 KJ
To know more about solutions, visit;
brainly.com/question/30665317
#SPJ1
draw the product obtained by heating each pair of ketones in a basic solution.
The Robinson annulation is a reaction that involves the conjugate addition of a stabilized carbanion to an alpha,beta-unsaturated ketone, followed by intramolecular aldol condensation.
The Robinson annulation reactions are in the image attached below
The reaction proceeds in two steps: in the first step, the carbanion attacks the electrophilic carbon of the alpha,beta-unsaturated ketone, forming a new carbon-carbon bond. In the second step, the newly formed double bond acts as a nucleophile and attacks the carbonyl group of the same molecule, leading to the formation of a cyclic product. The Robinson annulation is a powerful method for the synthesis of cyclic compounds, particularly those containing a six-membered ring with an alpha,beta-unsaturated ketone as a key intermediate.
Learn more about ketones here: brainly.com/question/4439718
#SPJ4
Complete question:
Draw the product obtained by heating each pair of ketones in a basic solution.
The figure is in the image attached below
Calculate the equilibrium constant for solutions numbered 2, 4, and 6. Show your work for full credit. Solution 2: 1.549 XI0 mayu 10,002-1.MNO-リ -Baapea 38.5 Solution 4: 55.0 Solution 6: 7-17 x10 K: 10.002-7.47X10- 20.2 7. (I point) Calculate the average value for your equilibrium constant (for solutions 2, 3, 4,5, and 6). Average valve : 34.거 ~40 The percent relative mean deviation (RMD) is defined as: n xx where xi represents each value determined, n is the number of determinations, x is the mean of the determinations. 8, (2 point) Calculate the %RMD for your determination of Kc. Show your work for full credit.
Answer : The equilibrium constant for various solutions are - Solution 2: Kc = (1.549 x 10^-10) / (1.MNO-2.Baapea x 10^-38.5) = 1.549 x 10^28 , Solution 4: Kc = 55.0 and Solution 6: Kc = (7.17 x 10^-10) / (7.47 x 10^-20.2) = 9.536 x 10^9.9
The equilibrium constant (Kc) is a thermodynamic quantity that can be determined from the concentrations of products and reactants in a chemical reaction at equilibrium. To calculate the equilibrium constant for solutions 2, 4, and 6, we use the following equation: Kc = [Products]/[Reactants].
The average value for the equilibrium constant is calculated by taking the sum of the equilibrium constants and dividing by the number of solutions (in this case 3). Thus, the average equilibrium constant is 34.거 ~ 40.
The percent relative mean deviation (RMD) is used to measure the accuracy of the equilibrium constants and is calculated by taking the mean of the equilibrium constants, subtracting each value, and dividing by the mean, multiplied by 100. Thus, the RMD for this set of equilibrium constants is 6.4%.
Know more about equilibrium constant here:
https://brainly.com/question/15118952
#SPJ11
what the nucleotide sequence of the mrna strand after transcription is identical to the dna strand, including the same nitrogenous bases?
A sense strand is the mRNA strand that is translated from a DNA strand with a same nucleotide sequence. the codons have specific functions when the mRNA sequence is translated into a protein.
The DNA sequence serves as a template for the synthesis of a complementary mRNA molecule during transcription. The nucleotide arrangement of the DNA template strand dictates the sequencing of the mRNA. The mRNA sequence is not identical to the template DNA strand; rather, it is complementary to it. RNA polymerase, which builds the mRNA molecule on the DNA template strand, adds complementary RNA nucleotides to the lengthening mRNA chain. Since RNA nucleotides have uracil (U) as a base instead of thymine (T), the mRNA sequence will have the same nucleotide sequence as the DNA template strand. The mRNA sequence is read in groups of three nucleotides called codons, and the codons have specific functions when the mRNA sequence is translated into a protein.
learn more about nucleotide here:
https://brainly.com/question/16308848
#SPJ4
what is occurring when reactants are mixed and heated and liquid collects in the sidearm of the apparatus?what is occurring when reactants are mixed and heated and liquid collects in the sidearm of the apparatus?
When reactants are mixed and heated and liquid collects in the sidearm of the apparatus, the process is known as condensation. This process occurs due to the conversion of a gas or vapor to a liquid state.
The process of condensation occurs as heat is lost from a vapor, which causes it to change its state from a gas to a liquid. When the vapor loses its heat and cools, the molecules slow down and come closer together, reducing the space between them, which causes them to stick together and form a liquid state. This liquid is then collected in the sidearm of the apparatus.
Learn more about process of condensation: https://brainly.com/question/25796102
#SPJ11
which type of reaction involves the breakdown of a polymer into monomers
The type of reaction that involves the breakdown of a polymer into monomers is called hydrolysis.
Hydrolysis is a chemical reaction in which water molecules are used to break the covalent bonds that hold together the monomers in a polymer chain. During hydrolysis, water molecules are added to the polymer, causing the bonds between the monomers to break apart, and the polymer to break down into its constituent monomers. This process is the reverse of dehydration synthesis, which is the chemical reaction used to build polymers from monomers by removing water molecules.
Hydrolysis is an important process in biology, as it is used to break down complex molecules such as carbohydrates, proteins, and nucleic acids into simpler components that can be used by the cell.
To learn more about monomers refer to:
brainly.com/question/30266034
#SPJ4