Hydrocarbon chain to which hydrogens have been added. A dehydration reaction type of reaction has occurred.
A chemical reaction is a method that leads to the chemical transformation of 1 set of chemical materials to any other. Classically, chemical reactions embody changes that handiest involve the positions of electrons in the forming and breaking of chemical bonds among atoms, with no alternative to the nuclei (no alternate to the factors gift), and can often be defined by a chemical equation. Nuclear chemistry is a sub-area of chemistry that entails the chemical reactions of risky and radioactive factors where each electronic and nuclear modification can occur.
The substance (or materials) to start with concern in a chemical response are referred to as reactants or reagents. Chemical reactions are normally characterized by a chemical exchange, and they yield one or greater merchandise, which normally have houses special from the reactants. Reactions regularly consist of a series of personal sub-steps, the so-known as primary reactions, and the facts on the precise direction of movement are part of the reaction mechanism.
To learn more about Reaction visit here:
brainly.com/question/17434463
#SPJ4
calculate your experimentally determined percent mass of water in manganese(ii) sulfate monohydrate. unrounded rounded experimentally determined percent mass of water
The mass percentage of water in hydrated magnesium sulfate (MnSO4 . H2O) will be 10.6%.
Percentage mass: The percentage mass is the ratio of the mass of the element or the molecule in the given compound.
The percentage can be given as:
Percent Mass = Mass of molecule / total mass of compound x 100%
The mass of the water is 18.02 g/mole and the molar mass of hydrated magnesium sulfate (MnSO4 . H2O) will be 169.03 g/mol.
Thus, Percent Mass = 18.02 / 169.03 x 100%
Percent Mass = 10.6 %
Therefore, the mass percentage of water in hydrated magnesium sulfate (MnSO4 . H2O) will be 10.6%.
To know more about mass percentage here
https://brainly.com/question/30313524
#SPJ4
--The given question is incomplete, the complete question is
"Calculate your experimentally determined percent mass of water in Manganese(II) sulfate monohydrate. Report your result to 2 or 3 significant figures, e. g. 9.8% or 10.2%."--
Help what is the answer??
The complete thermochemical equation of the reaction above is: 2CO₂(g) + 5H₂(g) --> C₂H₂(g) + 4H₂O(g) ∆H = +46.6 kJ.
How to calculate the enthalpy of a reaction?According to the reaction above, 23.3 kJ of energy is needed (absorbed) to react 1 mole of CO₂ with H₂. The reaction given is:
2CO₂(g) + 5H₂(g) --> C₂H₂(g) + 4H₂O(g)
2 moles of CO₂ reacts with 5H₂. So, the amount of energy absorbed for this reaction is 23.3 kJ doubled (46.6 kJ). The enthalpy is written as a positive value if the energy is absorbed.
Hence, the complete thermochemical equation is as follows:
2CO₂(g) + 5H₂(g) --> C₂H₂(g) + 4H₂O(g) ∆H = +46.6 kJ
Learn more about enthalpy of reaction here https://brainly.com/question/30673872
#SPJ1
A tire is at a pressure of 250 KPa at a temperature of 25°C. Calculate the pressure of the tire at -10°C.
The pressure of the tire at -10°C would be 220.64 kPa.
Pressure lawAccording to the pressure law, the pressure exerted by molecules of gases is directly proportional to the absolute temperature of the gases.
This is mathematically expressed as: P1/T1 = P2/T2
Where P1 and P2 are the initial and final pressure and T1 and T2 are the initial and final temperature of the gas.
In this case, P1 = 250 kPa, T1 = 25°C or 298K, and T2 = -10°C or 263K
P2 = P1 x T2/T1 = 250 x 263/298
= 220.64 kPa
In other words, the new pressure of the tire would be 220.64 kPa.
More on pressure law can be found here: https://brainly.com/question/1460296
#SPJ1
a compound made of bismuth (bi) and fluorine (f) is 68.8% bi (208.98 g/mol) and 31.2% f (18.009 g/mol). what is the name of this compound? bismuth is a metal with multiple possible charges as a cation.
The compound made of bismuth and fluorine is likely Bismuth(III) Fluoride, also known as Bismuth Trifluoride, with the chemical formula BiF3.
Bismuth is a metal with multiple possible charges as a cation, and its oxidation state can vary from -3 to +5. In this case, the compound is made up of 68.8% bismuth and 31.2% fluorine, which indicates that bismuth is in the +3 oxidation state, and the compound is Bismuth(III) Fluoride (BiF3).
This compound is a white crystalline solid that is often used as a component in optical materials, electroceramics, and in the production of other bismuth compounds.
Bismuth is a heavy, silvery-white metal that is known for its low toxicity and low thermal and electrical conductivity. Bismuth(III) Fluoride, as the name suggests, is composed of bismuth cations (Bi3+) and fluoride anions (F-). The compound forms a crystalline solid structure where the bismuth and fluoride atoms are held together by strong ionic bonds.
You can read more about bismuth at https://brainly.com/question/7622627
#SPJ4
A sample of 25.2g of candy bar was burned in a calorimeter. The calorimeter was calibrated to have a heat capacity of 8.72 kcal/Celsius. Calculate the food caloric content of the candy bar in nutritional calories per gram to three significant figures
The food caloric content of the candy bar in nutritional calories per gram to three significant figures is 890 cal/g
The heat released from the burning candy bar was measured and found to be 44.6 kcal. To find the food caloric content of the candy bar, we need to determine the amount of heat released per gram of candy bar.
First, we need to find the change in temperature of the calorimeter. This can be done by dividing the heat absorbed by the calorimeter (44.6 kcal) by its heat capacity (8.72 kcal/Celsius).
Change in temperature = 44.6 / 8.72 = 5.1 Celsius
Next, we need to divide the heat released from the candy bar (44.6 kcal) by the change in temperature (5.1 Celsius) to find the heat released per gram of candy bar.
Heat released per gram = 44.6 / (5.1 × 25.2 g) = 0.89 kcal/g
Finally, to find the food caloric content in nutritional calories per gram, we need to convert the heat energy unit from kilocalories to nutritional calories.
Food caloric content = 0.89 × 1000 = 890 cal/g to three significant figures.
Learn more about calories:
brainly.com/question/22374134
#SPJ4
12.2 g of aluminum nitrite and 92.5 g of ammonium chloride react to form aluminum chloride, nitrogen, and water. how many grams of the excess reagent remain after the reaction? enter to 1 decimal place.
The amount of excess NH4Cl remaining after the reaction is 55.7 g.
To find the amount of excess reagent in this reaction, we first need to write a balanced chemical equation for the reaction between aluminum nitrite (Al(NO3)2) and ammonium chloride (NH4Cl):
Al(NO3)2 + 6NH4Cl -> 2AlCl3 + 6NH3 + 6H2O
From this equation, we can see that for every 1 mole of Al(NO3)2, 6 moles of NH4Cl are required. We can determine the limiting reagent by finding the number of moles of each reactant and comparing them. The limiting reagent is the reactant that will run out first, meaning that the amount of product produced will be determined by the limiting reagent.
First, we'll find the number of moles of each reactant:
12.2 g Al(NO3)2 / 106 g/mol
= 0.115 mol Al(NO3)2
92.5 g NH4Cl / 53.5 g/mol
= 1.73 mol NH4Cl
Since 1.73 mol NH4Cl > 0.115 mol Al(NO3)2, we can say that
Al(NO3)2 is the limiting reagent NH4Cl is the excess reagent.The amount of NH4Cl used in the reaction is 0.115 mol Al(NO3)2 * 6 mol NH4Cl/1 mol Al(NO3)2 = 0.69 mol NH4Cl.
The amount of excess NH4Cl is 1.73 mol - 0.69 mol = 1.04 mol.
Finally, we can convert the number of moles of excess NH4Cl to grams:
1.04 mol * 53.5 g/mol = 55.7 g.
So, the amount of excess NH4Cl remaining after the reaction is 55.7 g to one decimal place.
Learn more about the limiting reagent here:
https://brainly.com/question/26905271
#SPJ4
A sample of 25.2g of candy bar was burned in a calorimeter. The calorimeter was calibrated to have a heat capacity of 8.72 kcal/Celsius. Calculate the food caloric content of the candy bar in nutritional calories per gram to three significant figures
A candy bar has a food calorie count of 5.78.
The heat capacity is 8.72 kilocalories per degree, and 1 food calorie or his 1 nutritional calorie equals 1 kilocalorie. equation:
c=[tex]\frac{e}{dt}[/tex]
c = 8.72
Delta t is the change in temperature, reported as 16.7 degrees Celsius. so solve
e=145.624 kcal
We know that 1 kilocalorie equals 1 food calorie, so 145 equals 145,624 food calories. Now you have to divide this by the grams of chocolate or candy bar. This was 25.2 grams. 5.78. Remember you need to round up. This is food calories per gram.
Learn more about calorie
brainly.com/question/15526391
#SPJ4
which fossil fuel can be made to burn cleaner and reduce carbon dioxide emissions if it is combined with purified oxygen? responses coal coal natural gas natural gas liquid petroleum gas liquid petroleum gas oil
Combining coal with purified oxygen can make it burn cleaner and reduce carbon dioxide emissions.
This process is known as oxygen-enhanced combustion or oxygen-fired combustion. In this process, the purified oxygen is introduced into the combustion chamber to increase the combustion efficiency, thereby reducing the carbon dioxide emissions. However, the other fossil fuels such as natural gas, liquid petroleum gas and oil cannot be made to burn cleaner with purified oxygen as they are already primarily composed of hydrocarbons and do not require oxygen to combust.
Combining purified oxygen with a fossil fuel like coal can lead to cleaner burning and reduced carbon dioxide emissions. This process is known as oxygen enrichment or oxygen-enhanced combustion. During oxygen enrichment, the proportion of oxygen in the combustion air is increased to around 30-35%, allowing for a more complete combustion of the coal.
Learn more about oxygen:
brainly.com/question/2272415
#SPJ4
In order for rocks to be classified as igneous, the rocks must
In order for rocks to be classified as igneous, the rocks must be developed from molten lava.
What is rock?Rock is a naturally occurring and cohesive conglomerate of one or more minerals in geology. These aggregates are the fundamental unit of the solid Earth and often form identifiable and mappable volumes. Rocks are typically classified into three broad groups based on the processes which resulted in their creation.
Igneous rocks are those that developed from molten lava. The heat within the earth's mantle turns this substance liquid. When magma rises to the earth's surface, it is known as lava. When lava cools, it forms rocks like tuff and basalt.
Therefore, in order for rocks to be classified as igneous, the rocks must be developed from molten lava.
To learn more about rock, here:
https://brainly.com/question/29767269
#SPJ1
over a certain time period, the steam plant produced 162 million btu of heat, 23,610 g of sulfur dioxide, and 1623 g of particulate matter. determine how many tons of each type of coal the steam plant must have burned. include a vector equation as part of your solution.
3.9 tons of A and 1.8 tons of B must be burned for Steam power plants.
Steam power plants consist of boilers, steam turbines, generators, and other ancillary equipment. Boilers produce high pressure, high temperature steam. A steam turbine converts the thermal energy of steam into mechanical energy. The generator then converts mechanical energy into electrical energy.
The amount of tons of each type of coal the Steam power plants must have burned is represented by the vector equation:
x1v1 + x2v2 = b
[tex]\left[\begin{array}{ccc}27.6&3100&250\\30&6400&360\\23&23610&1623\end{array}\right][/tex]
where first row represents v1, second row represents v2 and third row represents v3.
3.9 tons of A and 1.8 tons of B must be burned.
Learn more about Steam power plants
brainly.com/question/13156174
#SPJ4
A 151.10 mL volume of hydrochloric acid reacts completely with a solid sample of MgCO3. The reaction is given below.
2 HCl(aq) + MgCO3(s) → CO2(g) + H2O(l) + MgCl2(aq)
The volume of CO2 formed is 153.00 mL at 27.1 °C and 772 mmHg. What is the molarity of the HCl solution?
Answer:
0.0415 M
Explanation:
To solve this problem, we need to use the ideal gas law to calculate the number of moles of CO2 formed, and then use stoichiometry to calculate the number of moles of HCl used in the reaction. Finally, we can calculate the molarity of the HCl solution using the volume and number of moles of HCl.
First, let's calculate the number of moles of CO2 formed:
PV = nRT
where P is the pressure in atm, V is the volume in L, n is the number of moles, R is the gas constant (0.08206 L·atm/K·mol), and T is the temperature in Kelvin.
We need to convert the volume of CO2 from mL to L, the temperature from Celsius to Kelvin, and the pressure from mmHg to atm:
V = 153.00 mL = 0.15300 L
T = 27.1 °C + 273.15 = 300.25 K
P = 772 mmHg / 760 mmHg/atm = 1.016 atm
Plugging in these values, we get:
n = PV/RT = (1.016 atm)(0.15300 L)/(0.08206 L·atm/K·mol)(300.25 K) ≈ 0.00627 mol CO2
According to the balanced chemical equation, the reaction between HCl and MgCO3 has a 1:1 stoichiometry, which means that the number of moles of HCl used in the reaction is also approximately 0.00627 mol.
The volume of HCl used is 151.10 mL, or 0.15110 L. Therefore, the molarity of the HCl solution is:
M = n/V = 0.00627 mol / 0.15110 L ≈ 0.0415 M
Therefore, the molarity of the HCl solution is approximately 0.0415 M.
assume that your experimental mass percentage of copper was 38.92%. compared to the theoretical mass percent of copper in copper(ii) sulfate pentahydrate, was the experimental mass percent higher, lower, the same as, or unable to be determined? lower higher same cannot be determined
The comparison to the theoretical mass percent of copper in copper(ii) sulfate pentahydrate was the experimental mass percent higher.
Thus, the correct answer is higher (B).
Copper sulfаte pentаhydrаte, expressed in chemicаl notаtion аs [tex]CuSO_{4}-5H_{2}O[/tex], represents а “hydrаte.” Hydrаtes consist of аn ionic substаnce, а compound comprised of а metаl аnd one or more nonmetаls, plus wаter molecules, where the wаter molecules аctuаlly integrаte themselves into the solid structure of the ionic compound. This meаns, however, thаt а 100-grаm sаmple of copper sulfаte pentаhydrаte does not consist of 100 grаms of copper sulfаte.
This meаns thаt а 100-grаm sаmple of copper sulfаte pentаhydrаte will contаin 61.08 grаms of copper sulfаte. It аlso meаns thаt copper sulfаte pentаhydrаte contаins 100 - 61.08 = 38.92 percent wаter by mаss.
Your options aren't well arranged, but most probably your options were
A. lower
B. higher
C. same
D. cannot be determined
Thus, B is the correct answer.
For more information about copper(ii) sulfate pentahydrate refers to the link:
https://brainly.com/question/23991780
#SPJ4
Which of the following is a necessary trait of a good hypothesis
1. It includes a statement about the type of research to be used in testing the hypothesis
2. It is clear and testable
3. It is written in the form of a question
4. It includes a reference to the theory from which the hypothesis was derived
A necessary trait of a good hypothesis is that it is clear and testable.
The correct option is option 2.
What is a hypothesis?A hypothesis is a theory put up to explain a phenomenon.
A hypothesis must be testable according to the scientific method for it to be considered a scientific hypothesis. Scientific hypotheses are typically based on prior observations that cannot be adequately explained by the current body of knowledge.
An important trait of a good hypothesis is that it must be clear and testable.
Learn more about hypotheses at: https://brainly.com/question/606806
#SPJ1
A sample of 4.30 moles of NH3 gas occupies 6.50 L at 45°C. Calculate the pressure of the gas in atm.
The pressure of the NH3 gas is 2.19 atm, a sample of 4.30 moles of NH3 gas occupies 6.50 L at 45°C.
What is a gas pressure?Gas pressure is the force per unit area exerted by a gas on the walls of its container. It is a measure of the number of gas molecules colliding with the container's walls per unit of time, and is proportional to the number of gas molecules and their kinetic energy. It is a result of the gas molecules moving randomly in all directions and colliding with the walls of the container. When a gas is confined in a container, its pressure is exerted equally in all directions. The pressure is a scalar quantity, which means it has only magnitude and does not have a direction.
Gas pressure can be measured in a variety of units, including atmospheres (atm), torr, pascals (Pa), and pounds per square inch (psi). The most commonly used units for measuring gas pressure are atmospheres and pascals.
Calculation of Gas PressureTo calculate the pressure of a gas, the Ideal Gas Law is used which states that [tex]PV = nRT[/tex], where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature in Kelvin.
First step: Convert the temperature from Celsius to Kelvin:
45°C + 273.15 = 318.15 [tex]K[/tex]
Second step:Plug in the values and solve for P:
[tex]P = (nRT) / V[/tex]
[tex]P = (4.30 moles * 0.0821 Latm/molK * 318.15 K) / 6.50 L[/tex]
[tex]P = 2.19 atm[/tex]
So, the pressure of the [tex]NH3[/tex] gas is 2.19 [tex]atm[/tex].
To know more about Gas Presurre, visit:
https://brainly.com/question/24719118
#SPJ1
Acetylene gas (C2H2) reacts with oxygen to produce carbon dioxide and water. When 30. 0 g of acetylene is reacted with O2, 18. 5 g of water is formed
Acetylene gas (C2H2) reacts with oxygen to form carbon dioxide (CO2) and water (H2O) through the following chemical reaction:
[tex]C_2H_2 + O_2 \rightarrow CO_2 + H_2O.[/tex]
When 30.0 grams of acetylene is reacted with O2, 18.5 grams of water is produced as a result of the reaction. The production of 18.5 grams of water from 30.0 grams of acetylene suggests that the reaction has proceeded to completion, with all of the acetylene being consumed and transformed into its products. The reaction is exothermic, meaning that it releases heat energy. This reaction is important in various industrial processes, including welding and cutting metal
.Learn more about Acetylene gas:
brainly.com/question/20529866
#SPJ4
Q)- Acetylene gas (C2H2) reacts with oxygen to produce carbon dioxide and water. When 30. 0 g of acetylene is reacted with O2, 18. 5 g of water is formed What do you understand by this reaction?
give one function of iron in plants
Answer: Iron is necessary for photosynthesis because it facilitates the transfer of electrons and protons within the chloroplasts, which is required for the production of ATP, which is energy.
Explanation: Biology class helped a lot with this answer.
How many molecules are in 450 grams of Na2SO4?
Answer: 1.90834 X 10 ^ 24
Explanation:
Molar mass Na2SO4 = 23x2+ 32+16X4
= 142g/mol
Mass of Na2SO4 = 450g
Moles of Na2SO4 = mass/ molar mass
= 450g/142g/mol = 3.170 mol
Avogadro's number = 6.02X 10 ^ 23/mol
Number of molecules = moles X avogadro's number
= 3.17 X 6.02X 10^ 23 = 1.90834 X 10 ^ 24 molecules
Therefore the number of molecules of Na2SO4 is1.90834 X 10 ^ 24
g(t)=-2.3r² +3.5t; Find g(8.6)
g(t)=-2.3t² +3.5t; The value of g(8.6) is -140.008. Two expressions that are set equal to one another in a mathematical statement are the definition of an algebraic equation.
What does the phrase mean when it is simplified?To simplify a phrase, create an equivalent expression without any terms that are identical. The expression will then be rewritten using the fewest terms feasible.
What exactly is the simplification law?Applying the concepts of necessity and proportionality strictly is a requirement for simplifying legislation. The practise entails eliminating outmoded laws and regulations as well as codifying, recasting, and consolidating legislation.
Given;
g(t) = -2.3t^2+3.5t
Substitute t =8.6
g(t) = -2.3(8.6)^2+3.5(8.6)
g(t) = -170.108+30.1
g(t) = -140.008
To know more about algebraic equation visit;
https://brainly.com/question/4344214
#SPJ1
which solid would you expect to have the highest melting point? which solid would you expect to have the highest melting point? cao(s) kr(s) i2(s)
Out of the three solids, Iodine (I2) is expected to have the highest melting point.
This is because the intermolecular forces between iodine molecules are stronger than those between the other two substances, making it more difficult to separate the individual molecules. The stronger the intermolecular forces, the higher the energy required to separate the molecules and the higher the melting point. In comparison, Calcium oxide (CaO) and Krypton (Kr) have weaker intermolecular forces and therefore, lower melting points.
To know more about melting points, visit the link given below:
https://brainly.com/question/29578567
#SPJ4
when testing for the presence of sugar, what are the limitations of the benedict's test? select four answers.
The benedict's test is used to analysis the sugar sample. The correct choice for the limitations of the benedict's test are option(A) , (B), (C) and (E).
The Benedict test is a chemical analysis procedure that can be used to determine the reduced sugar content of a solution. Benedict's test is a qualitative test that distinguishes between reducing and non-reducing carbohydrates (sugars/saccharides). The limitations of the Benedict test include:
Unable to determine exact concentration of reducing sugar.Only semi-quantitative estimates can be provided.carbohydrate identification requires further testing.A color change in the test is not evidence and is not used in the analysis of colored complexes.Therefore, the limitations of benedict's test are A,B, C, E.
To learn more about benedict's test, refer:
https://brainly.com/question/17245545
#SPJ4
Complete question:
When testing for the presence of sugar, what are the limitations of the Benedict's test? (select all that apply)
A. It could not be used with intensely colored samples.
B. There is not a clear color change
C. You cannot tell which reducing sugar is present (i.e. glucose vs fructose vs maltose)
D. It cannot be used on a solid sample unless the sugars are extracted first
E. It doesn't detect sucrose and other non-reducing sugars, only small reducing sugars
F. You might burn your hand if you are not careful
the molecular formula of glucose is c6h12o6. what would be the molecular formula for a polymer made by linking eight glucose molecules together by dehydration reactions?
A molecule created by dehydration reactions joining three glucose molecules together would have the chemical formula C18H32O16.
By removing water molecules, dehydration reactions cause the molecules to create new chemical connections with one another. Three glucose molecules would dehydrate together, joining the separate molecules to create a bigger molecule. Since it is a dehydration reaction, it means that when two molecules are linked together, there will be one molecule of water removed. In this case, the larger molecule would have three times the number of carbon resulting in the molecular formula C18H32O16.
To learn more about dehydration
brainly.com/question/12261974
#SPJ4
A chemist determined by measurements that 0.080 moles of iron participated in a chemical reaction. Calculate the mass of iron that participated in the chemical reaction.
Based on the moles of iron given, the mass of iron that participated in the chemical reaction is 4.48 g.
What is the mass of iron that took part in the reaction?The mass of iron that took part in the reaction is determined from the molar mass and the moles of iron that took part in the reaction.
The moles of iron that took part in the reaction = 0.08 moles
The molar mass of iron = 56 g/mol
The formula below gives the relationship between, moles, molar mass, and mass of an element.
Mass = number of moles * molar mass
The mass of iron = 0.08 moles * 56 g/mol
The mass of iron = 4.48 g
Learn more about molar mass and mass at: https://brainly.com/question/837939
#SPJ1
for the reaction c + 2h2 -> ch4 how many grams of carbon are required to produce 18.5 moles of methane, ch4?
Total 14.4 g of carbons are required produce 18.5 moles of methane, CH₄
Calculating the problem:C + 2H₂ ==> CH₄
molar mass, C = 12 g / mol
molar mass, H = 1 g / mol
molar mass, CH₄ = 12 + 4 = 16 g / mol
So,1.2 mol CH₄ x 1 mole C / mol CH₄ x 12 g C / mol C = 14.4 g C
What is a molar mass, exactly?A substance's molar mass is the mass that contains one mole of the substance. Simply put, it is the weight of one substance mole. Each substance's atomic mass is multiplied by the subscript of that element in the chemical formula to determine its molar mass.
How is molar mass calculated?An element's atomic mass expressed as g/mol is its characteristic molar mass. However, the atomic mass in amu can also be multiplied by the molar mass constant (1 g/mol) to obtain the molar mass. Add up all of the atomic masses of the individual atoms in a compound to get its molar mass.
Learn more about molar mass:
brainly.com/question/837939
#SPJ4
Calculate the kinetic energy of a 100kg cart moving at a speed of 6 m/s.
The kinetic energy of a cart weighing 100kg moving at a speed of 6 m/s is 1800 J.
Kinetic energy is defined as the energy that an object has because of its motion. If you want to accelerate an object, then you must apply a force. Force can be applied when work is done by us. After work has been done, the energy will get transferred to the object, and the object will be moving with a new constant speed.
Formula for kinetic energy is given as,
K.E = 1/2 mv²
m = 100 kg
v = 6 m/s
Substituting the values we get,
K.E = 1/2 × 100 × 6 × 6
⇒ K.E = 1800 J
Hence, The kinetic energy of a 100kg cart moving at a speed of 6 m/s is 1800 J.
Learn more about kinetic energy from the link given below.
https://brainly.com/question/15764612
#SPJ4
state the names related to climate conditions for various crops and state their requirements. state the types of crops based on any of the factors.
Solar radiation, temperature, and rainfall are the three main climatic elements that affect how quickly plants grow, develop, and produce food. The buildup of dry materials must occur at the ideal temperature.
Solar radiation, temperature, and rainfall are the three main climatic elements that affect how quickly plants grow, develop, and produce food. The buildup of dry materials must occur at the ideal temperature. The following are some of the ideal circumstances for strong plant growth: Air temperature: 24 °C Day/ 19 °C Day (75F/65F) H2O temperature: cold at 26 °C, hot at 24 °C, not to exceed 25 °C. Minimum of 50 and no more than 70% relative humidity These fundamental resources for the food-producing industry, according to Perrin, include land, water, and other natural resources as well as important aspects like climate and ecological resilience. Environmental elements include air, water, soil, climate, native plants, and landforms. By definition, environmental factors have an impact on daily life and are a significant contributor to the disparities in health that exist between different geographic regions.
Learn more about Solar radiation here:
https://brainly.com/question/23338147
#SPJ4
The percent of P in Li3PO4 is
when the valve is opened, will the total pressure in the apparatus be less than atm, equal to atm, or greater than atm? explain your answer.
The total pressure in the apparatus be less than atm.
How do you find partial pressure in atm?
The partial pressure of a gas in a mixture of gases is the pressure that the gas would exert if it were present alone in a container at the same temperature and volume. The partial pressure of a gas in a mixture of gases can be found by dividing its mole fraction by the total pressure of the gas mixture. For example, if a gas mixture has a total pressure of 1 atm and the mole fraction of the gas in question is 0.4, then the partial pressure of the gas is 0.4 atm.
The volume of the container for each gas will rise when the valve is opened. Both of the gases' pressures will drop in accordance with Boyle's law. As a result, the pressure of the gas coming from valves 1 and 2 will fall, resulting in a lower than atm overall pressure in the apparatus.
Therefore, less than atm is the correct answer.
To learn more about partial pressure from the link
https://brainly.com/question/13199169
#SPJ4
polymers are formed by linking monomers together through____ reactions
Polymers are formed by linking monomers together through condensation reactions
Are monomers joined together by condensation?
Monomers are linked together by a type of reaction called a dehydration or condensation reaction. In this type of reaction, a water molecule is lost and a bond is formed between the two monomers.
How are polymers formed?
Monomers join together to make polymer chains by forming covalent bonds—that is, by sharing electrons. Other bonds then hold the groups of chains together to form a polymer material.
What happens in a condensation reaction?
Condensation reaction: A reaction in which two or more molecules combine to form a larger molecule, with the simultaneous loss of a small molecule such as water or methanol. While this occurs in many reactions, the term is usually reserved for reactions in which a new carbon-carbon bond is formed.
To know more about condensation reaction:
https://brainly.com/question/3611491
#SPJ4
Why do mothers have to be aware of the Rh factor?
If the mother is Rh positive and her child is Rh negative she will form antibodies that may kill her second child (if they are also Rh negative) because of agglutination between the antibodies of the mother and the blood of the baby.
If the mother is Rh positive and her child is Rh negative she will form antibodies that may kill her first child because of agglutination between the antibodies of the mother and the blood of the baby.
If the mother is Rh negative and her child is Rh positive she will form antibodies that may kill her second child (if they are also Rh positive) because of agglutination between the antibodies of the mother and the blood of the baby.
If the mother is Rh negative and her child is Rh positive she will form antibodies that may kill her first child (if they are also Rh positive) because of agglutination between the antibodies of the mother and the blood of the baby.
Blood proteins that determine blood types are
On the surface of the membrane
Inside the cytoplasm
Both on the cell membrane and inside there cytoplasm
Found in the bone marrow
If a person has type O+ blood then they have:
The A and B protein, but lack the Rh protein
An O protein but not the Rh protein
None of the ABO nor the Rh proteins
The Rh protein but not the A or the B proteins
If the mother is Rh negative and her child is Rh positive she will form antibodies that may kill her second child
Found in the bone marrow
The Rh protein but not the A or the B proteins
Why must mothers be aware of the rhesus factor?Mothers must be aware of the rhesus factor in order to prevent a potentially serious condition called Rh incompatibility. The rhesus factor, also known as the Rh factor, is a protein that is found on the surface of red blood cells.
If a woman who is Rh-negative (does not have the Rh factor) becomes pregnant with a fetus who is Rh-positive (does have the Rh factor), there is a risk that the mother's immune system will recognize the Rh factor on the fetus's red blood cells as a foreign substance and produce antibodies against it.
Learn more about rhesus factor:https://brainly.com/question/536473
#SPJ1
if i dilute 7000 ml to 8 m lithium acetate solution to a volume of 50000 ml what will the concentration of the solution be
The final concentration of the solution after dilution to 50000 ml will be 0.224 M.
To find the concentration of the solution after dilution, you can use the formula:
C1 * V1 = C2 * V2
Where C1 is the initial concentration of the solution, V1 is the initial volume, C2 is the final concentration of the solution after dilution, and V2 is the final volume after dilution.
In this case, C1 = 8 M and V1 = 7000 ml = 7 L
V2 = 50000 ml = 50 L
So, we can substitute these values in the equation to find the final concentration:
C2 = (C1 * V1) / V2 = (8 M * 7 L) / 50 L = 0.224 M
So, the final concentration of the solution after dilution will be 0.224 M.
The process of dilution involves increasing the volume of a solution while maintaining the same number of solute particles. The concentration of the solution decreases as the volume increases. To calculate the concentration of a solution after dilution, you can use the formula C1 * V1 = C2 * V2. In this formula, C1 is the initial concentration of the solution, V1 is the initial volume, C2 is the final concentration of the solution after dilution, and V2 is the final volume after dilution. By substituting the given values, you can find the final concentration of the solution. The process of dilution is useful in many applications, including adjusting the strength of chemicals for specific uses, preparing samples for analysis, and controlling the reaction rate in chemical reactions.
To know more about reaction rate please refer:
https://brainly.com/question/13440548
#SPJ4