To find the empirical formula of the compound formed between Mg and N, first, determine the moles of each element involved in the chemical reaction.
1. Moles of Mg:
0.789 g Mg / (24.31 g/mol) ≈ 0.0325 mol Mg
2. Moles of N:
Since the product weighs 1.09 g and the Mg weighs 0.789 g, the mass of N must be:
1.09 g - 0.789 g = 0.301 g
0.301 g N / (14.01 g/mol) ≈ 0.0215 mol N
3. Determine the mole ratio:
Divide the moles of each element by the smaller number of moles to find the simplest whole-number ratio.
0.0325 mol Mg / 0.0215 ≈ 1.51
0.0215 mol N / 0.0215 ≈ 1
Since 1.51 is close to 1.5, and the ratio must be in whole numbers, we can multiply both numbers by 2 to obtain the empirical formula:
Mg₁.₅₀N₁ → Mg₃N₂
Therefore, the empirical formula of the compound is Mg₃N₂, and the compound's name is magnesium nitride.
Learn more about empirical formula here:
https://brainly.com/question/14044066
#SPJ11
A series of lines involving a common level in the spectrum of atomic hydrogen lies at 656.46nm, 486.27nm, 434.17nm, and 410.29 nm. what is the next line in the series
The next line in the series is at 397.01 nm.
The given wavelengths correspond to the visible emission lines of hydrogen, which are produced when an electron drops from a higher energy level to the n=2 energy level (also called the Balmer series).
The formula to calculate the wavelengths of the Balmer series is:
1/λ = R(1/2² - 1/n²)
where λ is the wavelength, R is the Rydberg constant (1.097 × 10⁷ m⁻¹), and n is the quantum number of the energy level that the electron drops from.
We can use this formula to find the next wavelength in the series. First, we need to determine the quantum number of the energy level that produces this line.
To do this, we can use the given wavelengths to find the differences between successive lines:
656.46 nm - 486.27 nm = 170.19 nm
486.27 nm - 434.17 nm = 52.10 nm
434.17 nm - 410.29 nm = 23.88 nm
We can see that the differences are getting smaller, which means that the wavelengths are getting closer together as we move to higher energy levels.
Therefore, we can estimate the next difference to be around 20 nm.
Next, we can set up an equation to solve for n:
1/λ = R(1/2² - 1/n²)
1/λ' = R(1/2² - 1/(n+1)²)
where λ' is the next wavelength in the series.
We can rearrange these equations and subtract them to eliminate R:
1/λ - 1/λ' = 1/n² - 1/(n+1)²
Using an estimate of 20 nm for λ - λ', we can solve for n:
1/656.46 nm - 1/676.46 nm = 1/n² - 1/(n+1)²
n ≈ 4
Therefore, the next line in the series corresponds to the transition from the n=5 energy level to the n=2 energy level. Plugging n=5 into the formula for the Balmer series, we can calculate the wavelength:
1/λ = R(1/2² - 1/5²)
λ = 1/(R(1/2² - 1/5²))
λ ≈ 397.01 nm
To know more about wavelengths, refer here:
https://brainly.com/question/12924624#
#SPJ11
Which is more efficient, a butane lighter or an electric lighter (such as the ones traditionally found on the dashboard of automobiles)
In terms of energy efficiency, an electric lighter is more efficient than a butane lighter. However, as such the choice between a butane lighter and an electric lighter ultimately depends on the specific needs and circumstances of the user.
This is because an electric lighter does not require any fuel to operate, and instead uses electrical energy from a battery or the car's electrical system to generate a spark to light a fire.
On the other hand, a butane lighter requires fuel in the form of butane gas to operate, and some of the energy from the combustion of the butane is lost as heat and not used to produce a flame.
Additionally, butane lighters can release small amounts of unburned fuel into the air, contributing to air pollution.
However, it's worth noting that electric lighters may not be as practical for certain situations, such as camping or other outdoor activities where access to electrical power is limited. In such cases, a butane lighter may be a more suitable option.
To know more about energy efficiency refer here:
https://brainly.com/question/28939461#
#SPJ11
describe an area in the United States that would likely experience very low levels of photochemical smog.
An area in the United States that would likely experience very low levels of photochemical smog is the Rocky Mountain region, which includes parts of Colorado, Wyoming, Montana, and Idaho.
Photochemical smog is formed when sunlight reacts with pollutants such as nitrogen oxides (NOx) and volatile organic compounds (VOCs) from human activity, such as transportation and industry.
The high altitude of the Rocky Mountains means that the air is thinner, so there is less pollution to react with sunlight. Additionally, the region's low population density means that there are fewer emissions from sources such as cars and factories.
Furthermore, the Rocky Mountain region is characterized by a dry climate, which reduces the potential for the formation of photochemical smog. This is because humidity can help to initiate the chemical reactions that lead to the formation of smog.
To know more about photochemical smog here
https://brainly.com/question/1380323
#SPJ1
15.0 L of an ideal gas at 298 K and 3.36 atm are heated to 383 K with a new pressure of 6.35 atm. What is the new volume in liters
The new volume of the gas is 33.3 L. If 15.0 L of an ideal gas at 298 K and 3.36 atm are heated to 383 K with a new pressure of 6.35 atm.
We can use the combined gas law to solve this problem.which relates to the pressure, volume, and temperature of an ideal gas:
(P1 x V1) / T1 = (P2 x V2) / T2
where P1, V1, and T1 are the initial pressure, volume, and temperature of the gas, respectively, and P2, V2, and T2 are the new pressure, volume, and temperature of the gas, respectively.
Substituting the given values, we get:
(3.36 atm x 15.0 L) / 298 K = (6.35 atm x V2) / 383 K
Simplifying and solving for V2, we get:
V2 = (3.36 atm x 15.0 L x 383 K) / (298 K x 6.35 atm)
V2 = 33.3 L
Learn more about combined gas law here:
https://brainly.com/question/30458409
#SPJ11
If only 44 grams of COz are produced, what is the % yield? -
Answer:
To calculate the percent yield, you need to know the theoretical yield, which is the maximum amount of product that could be produced based on the starting materials and reaction conditions, and the actual yield, which is the amount of product that was actually obtained in the experiment. The percent yield is then calculated using the following formula:
Percent Yield = (Actual Yield ÷ Theoretical Yield) x 100%
In this case, we don't have information about the theoretical yield or the reaction conditions, but we know that only 44 grams of CO2 were produced. Without additional information, we cannot calculate the percent yield. The theoretical yield could be more or less than 44 grams, and the actual yield could also be more or less than the theoretical yield.
Therefore, we need more information to determine the percent yield.
2. Provide an example (name and structure) of a molecule found in the human body that contains an aromatic heterocycle. What is the name of that heterocycle
The molecule serotonin, which is found in the human body, contains an aromatic heterocycle called an indole.
What is indole ?Indole is an aromatic organic compound found in many plants and animals. It is an aromatic hydrocarbon that has a ring structure of five carbon atoms with a nitrogen atom at the center. It is also found in some bacteria and is produced when tryptophan is metabolized. Indole has a variety of uses in industry, from being used as a fuel to being used as a flavoring agent. In medicine, indole is used as a precursor for some drugs, such as the antibiotic ciprofloxacin. It is also used to produce aromatic organic compounds, such as indigo and indole-3-acetic acid. Indole also plays a role in the regulation of gene expression by acting as a signal molecule, which can affect the development and behavior of cells.
Serotonin has the chemical structure C₁₇H₂₁N₃O₁. It is a monoamine neurotransmitter that is synthesized in the central nervous system and the gastrointestinal tract. It plays a role in regulating mood, sleep, appetite, and other processes.
To learn more about indole
https://brainly.com/question/30542358
#SPJ4
When FeCl3 is ignited in an atmosphere of pure oxygen, this reaction takes place. 4 FeCl3(s) 3 O2(g) --> 2 Fe2O3(s) 6 Cl2(g) If 3.00 mol of FeCl3 are ignited in the presence of 2.00 mol of O2 gas, how much of which reagent is present in excess and therefore remains unreacted
In this reaction, FeCl3 and O2 react in a 4:3 mole ratio. So, for every 4 moles of FeCl3, we need 3 moles of O2.
First, we need to determine which reactant is limiting and which is in excess. To do this, we can use the mole ratio of FeCl3 to O2 in the balanced equation.
For every 4 moles of FeCl3, we need 3 moles of O2. So, if we have 3.00 mol of FeCl3 and 2.00 mol of O2, we can see that there is not enough O2 to completely react with all of the FeCl3.
To find out which reactant is limiting, we can calculate the amount of FeCl3 that would react with 2.00 mol of O2:
(2.00 mol O2) / (3 mol O2/4 mol FeCl3) = 1.33 mol FeCl3
Since we only have 3.00 mol of FeCl3, which is more than the 1.33 mol required to react with 2.00 mol of O2, FeCl3 is in excess and O2 is limiting.
Now, we can calculate the amount of excess reagent (FeCl3) remaining after the reaction is complete:
3.00 mol FeCl3 - 1.33 mol FeCl3 = 1.67 mol FeCl3
Therefore, 1.67 mol of FeCl3 is present in excess and remains unreacted.
learn more about reagent
https://brainly.com/question/26905271
#SPJ11
why did a mixture of 2.00 ml of ph 7.00 phosphate buffer, 0.900 ml of DI water and 0.100 ml of 0.0300 M p-nitrophenyl acetate in acetonitrile have an A400 of approximately 0.03 at zero time
The p-nitrophenyl acetate is being hydrolyzed by the water in the buffer solution, which results in an A400 of around 0.03 at zero time for the mixture of 2.00 mL of pH 7.00 phosphate buffer, 0.900 mL of DI water, and 0.100 mL of 0.0300 M p-nitrophenyl acetate in acetonitrile.
As an ester, p-nitrophenyl acetate is known to undergo hydrolysis in the presence of water to produce an alcohol and a carboxylic acid.
The buffer in this instance aids in keeping the pH of the solution constant at 7.00 by catalysing the hydrolysis of p-nitrophenyl acetate in the buffer solution. P-nitrophenol, which absorbs light with a wavelength of 400 nm, is created by the hydrolysis of p-nitrophenyl acetate.
Learn more about p-nitrophenyl visit: brainly.com/question/24052253
#SPJ4
Write the balanced half-reaction equation for when H2O2(aq)H2O2(aq) acts as an oxidizing agent in an acidic solution. Phases are optional.
The balanced half-reaction equation for when H2O2(aq) acts as an oxidizing agent in an acidic solution is:
H2O2(aq) + 2H+(aq) + 2e- -> 2H2O(l)
In this reaction, H2O2(aq) is the oxidizing agent and it undergoes reduction by gaining 2 electrons. The presence of H+ ions in the acidic solution provides the necessary protons for the reduction to occur. The resulting products are 2 molecules of water (H2O). An oxidizing agent is a substance that facilitates oxidation, a chemical reaction in which electrons are lost. It accepts electrons from another substance, which is thereby oxidized. The oxidizing agent itself is reduced, meaning it gains electrons. Common oxidizing agents include oxygen, hydrogen peroxide, halogens, and metal ions such as permanganate and dichromate. Oxidation reactions are essential in various industrial processes such as the production of fertilizers, fuels, and chemicals. In biological systems, many enzymes act as oxidizing agents, facilitating metabolic reactions. Oxidizing agents can also be harmful to living organisms, causing damage to cells and tissues, and are often involved in oxidative stress and aging.
Learn more about oxidizing agent here:
https://brainly.com/question/2743949
#SPJ11
If a solution containing 42.404 g of mercury(II) perchlorate is allowed to react completely with a solution containing 10.872 g of sodium dichromate, how many grams of solid precipitate will form
To determine the amount of solid precipitate that will form, we need to identify the limiting reactant first. balanced chemical equation for the reaction between mercury(II) perchlorate and sodium dichromate:
Hg(ClO4)2 + Na2Cr2O7 → HgCr2O7 + 2NaClO4
Next, we need to determine how many moles of each reactant we have:
moles of Hg(ClO4)2 = 42.404 g / (2 x 227.6 g/mol) = 0.0931 mol
moles of Na2Cr2O7 = 10.872 g / (2 x 297.8 g/mol) = 0.0183 mol
Now we can determine the limiting reactant. The reaction requires 1 mole of Hg(ClO4)2 to react with 1 mole of Na2Cr2O7, so we need to compare the moles of each reactant to see which one is in excess:
Hg(ClO4)2 : Na2Cr2O7 = 0.0931 mol : 0.0183 mol
Na2Cr2O7 is the limiting reactant because it is completely consumed in the reaction.
Finally, we can use the stoichiometry of the balanced equation to determine how many moles of solid precipitate (HgCr2O7) will be formed:
moles of HgCr2O7 = moles of Na2Cr2O7 = 0.0183 mol
Now we can find the mass of HgCr2O7 precipitated:
mass of HgCr2O7 = moles of HgCr2O7 x molar mass of HgCr2O7
= 0.0183 mol x 596.4 g/mol
= 10.9 g
Therefore, 10.9 g of solid precipitate (HgCr2O7) will form.
to know more about determine the amount of solid precipitate click this link-
brainly.com/question/30037483
#SPJ11
What percent of the first anion that precipitates will be left in solution when the second compound starts to precipitate
the percent of the first anion left in solution when the second compound starts to precipitate depends on the solubility product constants and concentrations of both compounds, as well as the common ion effect and Le Chatelier's principle.
To determine the percent of the first anion left in solution when the second compound starts to precipitate, you need to consider the solubility product constants (Ksp) of both compounds and their respective concentrations. The solubility product constant represents the equilibrium between a solid and its constituent ions in a solution. When the ion product (concentration of cations multiplied by the concentration of anions) exceeds the Ksp, precipitation occurs.
Initially, as you add the precipitating agent, only the first compound will precipitate because its Ksp is lower than that of the second compound. When the ion product of the second compound reaches its Ksp, it will also start to precipitate. At this point, some of the first anion will still be present in the solution.
To calculate the percent of the first anion remaining, you can use the common ion effect and Le Chatelier's principle, taking into account the decrease in concentration of the first anion as the second compound begins to precipitate. You can then divide the concentration of the first anion left in the solution by its initial concentration and multiply by 100 to obtain the percentage.
Learn more about Le Chatelier's principle here:
https://brainly.com/question/29195371
#SPJ11
A current of 4.29 A4.29 A is passed through a Fe(NO3)2Fe(NO3)2 solution. How long, in hours, would this current have to be applied to plate out 5.30 g5.30 g of iron
To calculate the time required to plate out 5.30 g of iron from a Fe(NO3)2 solution with a current of 4.29 A, we need to use the formula:
mass of substance = current x time x atomic mass / (number of electrons x Faraday's constant)
Here, the atomic mass of iron is 55.85 g/mol, the number of electrons transferred per ion of Fe(NO3)2 is 2, and Faraday's constant is 96,485 C/mol.
Substituting the given values, we get:
5.30 g = 4.29 A x time x 55.85 g/mol / (2 x 96485 C/mol)
Solving for time, we get:
time = 5.30 g x 2 x 96485 C/mol / (4.29 A x 55.85 g/mol) = 4.90 hours
Therefore, the current of 4.29 A would have to be applied for 4.90 hours to plate out 5.30 g of iron from the Fe(NO3)2 solution.
To find the time required to plate out 5.30 g of iron using a current of 4.29 A, we need to use Faraday's Law of Electrolysis. First, let's determine the relevant information:
1. Current (I) = 4.29 A
2. Mass of iron to be plated (m) = 5.30 g
3. Molar mass of iron (M) = 55.85 g/mol
4. Number of electrons transferred per atom of iron (n) = 2 (since Fe²⁺ → Fe + 2e⁻)
5. Faraday's constant (F) = 96485 C/mol
Now, we can calculate the number of moles of iron to be plated:
moles of iron = m / M = 5.30 g / 55.85 g/mol ≈ 0.0949 mol
Next, we can find the total charge required to plate the iron:
Charge (Q) = moles of iron × n × F = 0.0949 mol × 2 × 96485 C/mol ≈ 18310 C
Finally, we can calculate the time (t) in seconds, using the formula Q = I × t, and then convert it to hours:
t = Q / I = 18310 C / 4.29 A ≈ 4267 s
Now, converting seconds to hours:
t (hours) = 4267 s / 3600 s/h ≈ 1.19 h
So, it would take approximately 1.19 hours to plate out 5.30 g of iron using a current of 4.29 A.
To learn more about Faraday's Law of Electrolysis Click this!
brainly.in/question/14483155
#SPJ11
The amount of a given gas dissolved in the blood ________. is described primarily by Boyle's law is directly proportional to the partial pressure of the gas increases at higher altitudes All of the choices are correct
The amount of a given gas dissolved in the blood increases at higher altitudes.option (b)
This means that as the partial pressure of a gas in contact with the blood increases, the amount of that gas dissolved in the blood will also increase. However, this relationship is not described primarily by Boyle's law, which relates the pressure and volume of a gas at constant temperature.
At higher altitudes, the atmospheric pressure decreases, which in turn decreases the partial pressure of all gases. As a result, the amount of gas dissolved in the blood will also decrease at higher altitudes. This can lead to altitude sickness or hypoxia if the body does not acclimatize to the lower oxygen levels.
Learn more about gas dissolved
https://brainly.com/question/1350827
#SPJ4
Full Question: The amount of a given gas dissolved in the blood:
a) is directly proportional to the solubility of the gas.
b) increases at higher altitudes.
c) is decreased primarily by Boyle's law.
d) is described by all of the above.
A galvanic cell uses a platinum electrode as the anode. Does the mass of the electrode increase, decrease, or remain the same as the reaction proceeds
The mass of the platinum electrode remains the same as the reaction proceeds in a galvanic cell.
In a galvanic cell, the anode undergoes oxidation and loses electrons, while the cathode undergoes reduction and gains electrons. The oxidation reaction occurs at the anode, and as a result, metal atoms from the electrode dissolve into the electrolyte solution as positively charged ions.
However, in the case of a platinum electrode, which is an inert metal, it does not undergo any chemical reaction during the process. Therefore, the mass of the platinum electrode remains unchanged as the reaction proceeds. This is because platinum is an inert metal that is not susceptible to oxidation or reduction under the conditions of the galvanic cell.
In other words, platinum acts as a catalyst for the reaction, facilitating the electron transfer between the two electrodes without being consumed in the process. Hence, the mass of the platinum electrode remains constant throughout the reaction.
To know more about galvanic cell refer here:
https://brainly.com/question/30268944#
#SPJ11
A solution of CaCl2 in water forms a mixture that is 32.5% calcium chloride by mass. If the total mass of the mixture is 404.5 g, what masses of CaCl2 and water were used?
The masses of CaCl_2 and water used were 132.18 g and 361.52 g, respectively.
To solve this problem, we need to first understand that the percentage of calcium chloride in the mixture refers to the mass ratio of calcium chloride to the total mass of the mixture. So, we can set up an equation using this information.
Let x be the mass of CaCl2 used and y be the mass of water used. Then, we have:
- The mass of CaCl2 in the mixture is 0.325x (since the mixture is 32.5% CaCl2 by mass).
- The mass of water in the mixture is y.
- The total mass of the mixture is x + y, which we know is 404.5 g.
Putting these together, we get the equation:
0.325x + y = 404.5
Now, we have one equation with two variables, so we need another equation to solve for x and y. Fortunately, we can use the fact that CaCl2 is a compound with a fixed ratio of elements (one calcium atom for every two chloride ions) to set up another equation.
The molar mass of CaCl2 is 110.98 g/mol, which means that 1 mol of CaCl2 contains 1 mol of calcium and 2 mol of chloride. Since the percentage of CaCl2 in the mixture is 32.5%, we know that the mass ratio of calcium to chloride in the mixture is 1:2 (by mass). Therefore, the mass of calcium in the mixture is 0.325x/3 (since calcium makes up one-third of the total mass of CaCl2) and the mass of chloride in the mixture is 0.325x/3 * 2 (since there are two chloride ions for every calcium ion).
Using the molar mass of calcium (40.08 g/mol) and chloride (35.45 g/mol), we can set up another equation:
(0.325x/3) * 40.08 + (0.325x/3 * 2) * 35.45 = 0.325x
Simplifying this equation, we get:
0.325x/3 * (40.08 + 2 * 35.45) = 0.325x
Solving for x, we get:
x = 132.18 g
Now that we know x, we can use the first equation to solve for y:
0.325(132.18) + y = 404.5
y = 404.5 - 42.98 = 361.52 g
For more such questions on calcium chloride
https://brainly.com/question/9322037
#SPJ11
Reaction: H2O2(aq)+3I- (aq) +2H(aq)->I3-(aq)+2H2O(l) in the first 10.0 seconds of the reaction, the concentration of i−i− drops from 1.180 mm to 0.805 mm .(a) Calculate the avg rate of this reaction in this time interval.(b)Predict the rate of chance in the concn of H+ (that is, DELTA [H+]/DELTAt) during this time interval.
(a) The average rate of the reaction can be calculated using the formula:
average rate = Δ[I3^-]/Δt = -Δ[I^-]/3Δt
where Δ[I^-] is the change in the concentration of I^- over the time interval, and Δt is the time interval.
Δ[I^-] = [I^-]final - [I^-]initial = 0.805 mm - 1.180 mm = -0.375 mm
Δt = 10.0 s
Substituting these values into the formula, we get:
average rate = -Δ[I^-]/3Δt = -(-0.375 mm)/(3 × 10.0 s) = 0.0125 mm/s
Therefore, the average rate of the reaction during the first 10.0 seconds is 0.0125 mm/s.
(b) The balanced equation for the reaction shows that there are two moles of H^+ consumed for every mole of H2O2 reacted:
H2O2(aq) + 3I^-(aq) + 2H^+(aq) → I3^-(aq) + 2H2O(l)
Therefore, the rate of change in the concentration of H^+ can be calculated using the formula:
rate of change in [H^+] = -2 × average rate
where the factor of 2 is included because there are two moles of H^+ consumed per mole of H2O2 reacted.
Substituting the average rate calculated in part (a) into the formula, we get:
rate of change in [H^+] = -2 × 0.0125 mm/s = -0.0250 mm/s
Therefore, the rate of change in the concentration of H^+ during the first 10.0 seconds is -0.0250 mm/s.
To know more about concentration please visit:
https://brainly.com/question/12970323
#SPJ11
Which TWO problems did China face?
Warfare
Famines
Housing Shortages
The two problems china faced are warfare and famines.
Invasion and conflict have occurred frequently throughout Chinese history, making warfare a recurring theme. Since the Warring States era through the Opium Wars and the Chinese Civil War, China has faced both internal and external security threats frequently with severe human and financial costs.
Famines have also been a major issue in China, where a number of severe famines have resulted in widespread hunger and fatalities. For instance, it is estimated that between 15 and 45 million people died from starvation and other related causes during the Great Chinese Famine of 1959–1961.
The Great Famine of 1876–1879 and the Yangzi River flood in 1931, which also caused widespread famine, are other famines in Chinese history.
Learn more about Chinese Famine at:
brainly.com/question/30909746
#SPJ1
What is the most likely charge on an ion formed by an element with a valence electron configuration of ns2np1
The most likely charge on an ion formed by an element with a valence electron configuration of ns2np1 is +1.
Elements with a valence electron configuration of ns2np1, such as chlorine and iodine, have a tendency to gain one electron to achieve a stable octet configuration. This results in the formation of a negatively charged ion with a charge of -1. However, these elements can also lose one electron to achieve a stable configuration, which would result in a positively charged ion with a charge of +1. Since the tendency to gain an electron is stronger than the tendency to lose an electron, the most likely charge on an ion formed by such an element would be +1.
learn more about electron configuration
https://brainly.com/question/26084288
#SPJ11
Suppose that there were two isotopes of Sodium. 28% of the naturally occuring sodium atoms had a mass of 22 amu, and 72% atoms had a mass of 23 amu. What would be the average atomic mass of Sodium?
The average atomic mass of sodium with two isotopes, considering their respective masses and abundances, is 22.72 amu. Isotope 1 has a mass of 22 amu and an abundance of 28%, while isotope 2 has a mass of 23 amu and an abundance of 72%.
To calculate the average atomic mass of sodium with two isotopes, you'll need to take into account the percentage and mass of each isotope. Here's the formula:
Average atomic mass = (Isotope 1 mass × Isotope 1 abundance) + (Isotope 2 mass × Isotope 2 abundance)
In this case:
Isotope 1: mass = 22 amu, abundance = 28% (or 0.28)
Isotope 2: mass = 23 amu, abundance = 72% (or 0.72)
Average atomic mass = (22 × 0.28) + (23 × 0.72) = 6.16 + 16.56 = 22.72 amu
So, the average atomic mass of sodium in this scenario would be 22.72 amu.
Learn more about sodium: https://brainly.com/question/29327783
#SPJ11
When 72.476 g of a substance with a molecular weight of 183.031 g/mol is combusted, 383.35 kJ of heat is produced. What would the enthalpy change per mole (kJ/mol) of the substance under these conditions
The enthalpy change per mole of the substance is approximately 967.8 kJ/mol.
To calculate the enthalpy change per mole of the substance, we need to use the given information: mass of the substance, molecular weight, and heat produced. Here are the steps:
1. Determine the number of moles of the substance combusted:
Number of moles =\frac{ mass }{molecular weight}
Number of moles = \frac{72.476 g }{183.031 g/mol}
Number of moles ≈ 0.396 mol
2. Calculate the enthalpy change per mole:
Enthalpy change per mole = \frac{heat produced }{ number of moles}
Enthalpy change per mole =\frac{ 383.35 kJ }{ 0.396 mol}
Enthalpy change per mole ≈ 967.8 kJ/mol
learn more about enthalpy Refer: https://brainly.com/question/16720480
#SPJ11
You will be given a 100. mg/L quinine stock solution that you will use to prepare five dilutions (or standards). Your target range for your standard concentrations is 10.0 - 50.0 mg/L. You decide that you want to make a 10.0 mg/L standard. In order to produce a solution with a final volume of 10.0 mL, what volume of the 100. mg/L quinine stock solution will you need to use
Thus we need to use 1.0 mL of the 100. mg/L quinine stock solution to prepare a 10.0 mg/L standard quinine solution with a final volume of 10.0 mL.
How to determine the volume of a desired concentration of the solution?To prepare a 10.0 mg/L standard quinine solution with a final volume of 10.0 mL from a 100. mg/L quinine stock solution, you will need to use the following steps:
1. Identify the desired concentration: In this case, you want a 10.0 mg/L quinine solution.
2. Identify the final volume required: You want a 10.0 mL solution.
3. Determine the concentration of the stock solution: The given stock solution has a concentration of 100. mg/L.
Now, use the dilution formula C1*V1 = C2*V2, where C1 is the initial concentration, V1 is the volume of the stock solution to be used, C2 is the desired concentration, and V2 is the final volume.
Plugging in the values:
(100 mg/L) * V1 = (10.0 mg/L) * (10.0 mL)
To find V1, divide both sides by 100 mg/L:
V1 = (10.0 mg/L) * (10.0 mL) / (100 mg/L)
V1 = 1.0 mL
To know more about Volume:
https://brainly.com/question/25307719
#SPJ11
During the initial pressure test, the source shutoff valve shall remain closed and the test pressure for pressure gases shall be 1.5 times the system working pressure, but not less than _____________.
During the initial pressure test, the source shutoff valve should remain closed and the test pressure for pressure gases should be 1.5 times the system working pressure, but not less than the minimum specified value.
During the initial pressure test, the source shutoff valve shall remain closed and the test pressure for pressure gases shall be 1.5 times the system working pressure, but not less than the minimum allowable pressure specified by the manufacturer or applicable code requirements.
It is important to follow the specified pressure requirements during testing to ensure the safety and integrity of the system. Any deviations from the specified requirements could lead to dangerous situations, including leaks or ruptures in the system.
Therefore, it is crucial to carefully follow the testing procedures and guidelines provided by the manufacturer or applicable codes.
To know more about initial pressure click on below link :
https://brainly.com/question/23710615#
#SPJ11
Answer:
The test pressure should be 1.5 times the working pressure or the MAWP, whichever is higher.
Explanation:
The MAWP is the maximum pressure at which the system is designed to operate safely.
The minimum pressure required during the initial pressure test for pressure gases can vary depending on the applicable regulations, codes, or standards.
However, a common requirement is that the test pressure shall be 1.5 times the system working pressure, but not less than the maximum allowable working pressure (MAWP) of the system.
Therefore, the test pressure should be 1.5 times the working pressure or the MAWP, whichever is higher.
To know more on MAWP refer,
https://brainly.com/question/19339512#
#spj11
imultaneous determination of the composition of a mixture of two species is possible with spectroscopy due to it's __________.
Simultaneous determination of the composition of a mixture of two species is possible with spectroscopy due to its ability to measure the absorption or emission spectra of the mixture.
When a sample is exposed to light, some wavelengths are absorbed while others are transmitted or scattered. By measuring the amount of light absorbed at different wavelengths, the composition of the mixture can be determined. This is possible because each species in the mixture has a unique spectral signature, which is determined by its chemical structure and physical properties.
For example, if a mixture contains two species that absorb light at different wavelengths, spectroscopy can be used to measure the absorption spectra of both species simultaneously. The amount of light absorbed by each species is proportional to its concentration in the mixture, allowing the composition of the mixture to be determined.
To know more about spectroscopy visit:-
https://brainly.com/question/28523860
#SPJ11
A solution contains 0.0470 M Ca2 and 0.0930 M Ag . If solid Na3PO4 is added to this mixture, which of the phosphate species would precipitate out of solution first
The phosphate species that would precipitate out of solution first when solid Na₃PO₄ is added to a solution containing 0.0470 M Ca²⁺ and 0.0930 M Ag⁺ is Ca₃(PO₄)₂.
When Na₃PO₄ is added to the solution, it will react with the Ca²⁺ and Ag⁺ ions to form insoluble salts. The balanced chemical equation for the reaction between Na₃PO₄ and Ca²⁺ is:
3Ca²⁺ + 2PO₄³⁻ + 3Na⁺ → Ca₃(PO₄)₂ + 3Na⁺
The solubility product constant (Ksp) for Ca₃(PO₄)₂ is 1.3 × 10⁻²⁵, which indicates that it is highly insoluble and will precipitate out of solution first. In contrast, the Ksp for Ag₃PO₄ is 2.8 × 10⁻²⁵, which is also very low, but slightly higher than that of Ca₃(PO₄)₂.
However, Ag₃PO₄ is less likely to precipitate out of solution first because it forms a gelatinous precipitate that can be difficult to filter. Therefore, Ca₃(PO₄)₂ is the species that would precipitate out of solution first.
learn more about Solubility product constant here:
https://brainly.com/question/1419865
#SPJ11
Which of the following elements will form negative ions? Check
all that apply.
K
S
I
Mg
Answer:
S and I will form a Negative charge
Explanation:
From the Periodic Table, we know that elements having,6,7 valence electrons have the tendency to gain electrons and try to form negative ions.
As per the given question,
K gives up 1 electron to make it a positive charge
And,
Mg gives up 2 electrons to make it a positive charge
And ,
S and I both take electrons making them negatively charged.
is carried out isothermally and isobarically in a flow reactor where pure A is fed at a concentration of 4.0 mol/dm3. If the equilibrium conversion is found to be 60%. What is the equilibrium constant, Kc if the reaction is a gas phase reaction
The equilibrium constant for this gas phase reaction is 1.6 x 10^-2.
To find the equilibrium constant, Kc, we need to use the equilibrium conversion and the concentration of the reactant, A. The equation for the reaction can help us determine the expression for Kc.
Since the reaction is a gas phase reaction, we can use the partial pressures of the reactant and product in the expression for Kc.
The reaction can be written as:
A ⇌ B + C
At equilibrium, the concentration of A is (1-0.6) x 4.0 = 1.6 mol/dm3, and the concentrations of B and C are also 1.6 mol/dm3 each.
The equilibrium constant expression for this reaction can be written as:
Kc = (pB x pC) / pA
where pA, pB, and pC are the partial pressures of A, B, and C at equilibrium, respectively.
Assuming ideal gas behavior, we can use the ideal gas law to relate the partial pressures to the concentrations:
pA = nA x RT / V
pB = nB x RT / V
pC = nC x RT / V
where nA, nB, and nC are the moles of A, B, and C, respectively, V is the volume of the reactor, and R is the gas constant.
Since the reaction is carried out isothermally and isobarically in a flow reactor, the volume does not change, and we can cancel it out in the expression for Kc:
Kc = (nB x nC) / nA
At equilibrium, nA = 4.0 x 10^-3 x V = 1.6 x 10^-2 mol, and nB = nC = 1.6 x 10^-2 mol.
Substituting these values into the expression for Kc, we get:
Kc = (1.6 x 10^-2)^2 / (1.6 x 10^-2) = 1.6 x 10^-2
Therefore, the equilibrium constant for this gas phase reaction is 1.6 x 10^-2.
Learn more about :
equilibrium constant : brainly.com/question/29802105
#SPJ11
Your neighbor is fertilizing his lawn using a dry chemical fertilizer. As he is placing the fertilizer on the ground, a large gust of wind blows fertilizer all over him. You approach him and he is breathing normally. You would start care by:
A strong gust of wind blasts fertiliser all over him while he is laying the fertiliser on the ground. When you get close to him, his breathing is regular. You would begin your treatment by using a towel or gloved hand to sweep the fertiliser off of him.
Verify the safety of the situation. Body fat, muscles, and skin are examples of soft tissues. Water-rinse the wound. The likelihood of infection will be lower if you keep the wound submerged in flowing water. Soap-wash the area around the wound.
Heat therapy would improve blood flow to the wound site and trigger the inflammatory processes necessary for tissue healing. Heat can also promote mobility by easing muscular stiffness. Is heat beneficial for a shattered bone's healing process. yes.
Learn more about fertiliser visit: brainly.com/question/22283073
#SPJ4
You are titrating an acid into a base to determine the concentration of the base. The endpoint of the neutralization is reached but the stopcock on the buret sticks slightly and allows a few more drops of acid to fall into the solution. How will this affect your calculations for the concentration of the base
Adding more acid after the endpoint of a titration will make the solution too acidic and lower the calculated concentration of the base, resulting in an underestimate of its concentration.
To avoid this error, it is important to stop the titration immediately once the endpoint is reached and not to add any additional drops of titrant. If the stopcock on the buret sticks, it should be fixed or replaced before proceeding with the titration to ensure accurate results.
If additional acid is accidentally added, the titration should be repeated to obtain more accurate results.
It is also important to ensure that the equipment used for the titration is clean and free of any contaminants that may affect the reaction. The buret, pipette, and other equipment should be rinsed thoroughly with the solution being used to ensure accurate results.
Additionally, the endpoint should be carefully determined, which is often indicated by a color change or other physical change in the solution being titrated.
To know more about titration, refer here:
https://brainly.com/question/13307013#
#SPJ11
How does the wavelength of an X-ray produced from a K-alpha transition in molybdenum compare to that produced from a lower energy K-alpha transition in copper
The wavelength of an X-ray produced from a K-alpha transition in molybdenum is shorter than that produced from a lower energy K-alpha transition in copper. This is due to the fact that the energy difference between the K-shell and L-shell in molybdenum is greater than that in copper.
In a K-alpha transition, an electron from the L-shell fills the vacancy in the K-shell, releasing energy in the form of an X-ray. The energy of the X-ray is determined by the energy difference between the K and L shells. Molybdenum has a higher atomic number than copper, which means that it has more electrons and a larger nucleus.
This results in a stronger attraction between the electrons and the nucleus in molybdenum, leading to a larger energy difference between the K and L shells compared to copper. As a result, the X-ray produced from a K-alpha transition in molybdenum has a shorter wavelength and higher energy than that produced from a lower energy K-alpha transition in copper.
This has practical implications in X-ray spectroscopy, where molybdenum is often used as an X-ray source for its strong K-alpha emission line, which can be used to identify and analyze the chemical composition of materials.
Know more about X-ray here:
https://brainly.com/question/24505239
#SPJ11
A barge is loaded with concentrated H2SO4 and injected 100 liters of the acid to the lake. Assume the acid was mixed evenly over the depth. What is the maximum concentration of H2SO4 that can be found in the lake one day later, if Dx is 0.2 m2/s and Dy is 0.1 m2/s
The maximum concentration of H2SO4 that can be found in the lake one day later is 0.192 times the initial concentration, assuming that the acid is evenly mixed over the depth and not removed from the lake over time.
To determine the maximum concentration of H2SO4 in the lake one day later, we can use the two-dimensional diffusion equation:
∂C/∂t = D∇^2C
where C is the concentration of H2SO4, t is time, and D is the diffusion coefficient.
Assuming that the acid is mixed evenly over the depth, we can use two-dimensional diffusion in the x and y directions. Thus, we can write:
∂C/∂t = Dx (∂^2C/∂x^2) + Dy (∂^2C/∂y^2)
We also know that the initial concentration of the acid is 100 L/total volume of the lake. Therefore, we can use the boundary condition:
C(x,y,0) = 100/(depth x surface area)
Assuming that the acid is not removed from the lake over time, we can use the boundary condition:
C(x,y,t) → 0 as (x,y) → ∞
Solving this diffusion equation using separation of variables and Fourier series, we can find that the maximum concentration of H2SO4 in the lake one day later is:
C_max = 100/(depth x surface area) x [4/π ∑_(n=1)^∞ (1/n) exp(-(nπ)^2Dt/depth^2)]
Plugging in the given values of Dx, Dy, and 1 day (t = 86400 s), we get:
C_max = 100/(depth x surface area) x 0.192
To learn more about equation visit;
brainly.com/question/10413253
#SPJ11