what’s risky about “risky sharing”

Typically, wireless connectivity or an external interface (such a USB port) are used to connect thunderbolt external hard drives to computers.

In spite of their small, they have a lot of storage capacity for data, including documents, spreadsheets, presentations, music, and movies. Most external hard drives connect to computers through USB or eSATA, and many also get the power they require to operate from the computer's USB connector.

Through external SATA (eSATA), FireWire, or USB, external hard drives can be connected to a computer. Make sure the external drive's port is compatible with the computer's port by checking the specifications.

To know more about thunderbolt external hard drives visit :-

https://brainly.com/question/15025904

#SPJ4

c. recovery partition contains the data necessary to restore a hard drive back to its state at the time the computer was purchased and is designed to be used only if the computer malfunctions.

What is Recovery partition?

A partition is a portion of a hard drive that contains a backup copy of the operating system and other important files necessary to restore the computer to its original state. It is often referred to as a recovery partition and its purpose is to provide a means of recovering the system in case of a malfunction or failure.

This partition is not intended for regular use and is separate from the main operating system partition. The recovery partition typically contains all the necessary software and drivers required to reinstall the operating system and restore the computer to its original state.

By using the recovery partition, users can avoid the need to reinstall the operating system from a separate installation media, which can be time-consuming and complicated.

To learn more about Recovery partition, visit: https://brainly.com/question/11103921

#SPJ4

When the Spectrum router blinks alternately in red and blue, it means the firmware is being updated. Don't halt the procedure. Wait for the process to finish in between 10 and 15 minutes.

Your gateway is undergoing its startup and registration process if the LED is blinking. If the indicator is off, the cable link is unavailable.

Please double-check the following things if the "Router" LED doesn't stop blinking: Examine the Ethernet cable that connects the router and Internet Bridge. Ensure that the cable is plugged in properly on both ends. When connecting the Internet Bridge to your router, try a different Ethernet cable.

To know more about  router visit:-

https://brainly.com/question/29869351

#SPJ4

"The Synchronous Scrolling button is used when viewing documents side by side" is a TRUE statement.

Depending on the program and how it is clicked or scrolled, the scroll button may have several uses. I've used the scroll button for these three frequently occurring tasks.

Pressing the button and then dragging the mouse to scroll up, down, and left and right is one of the features that I don't use very often. Personally, I don't use this very much because I find the program's own scroll bars or my own keyboard shortcuts to be faster and more dependable options.

Here you can learn more about scroll button in the link brainly.com/question/1227887

#SPJ4

Demands the absence of data model recurring groupings and multi-valued properties. An attribute with multiple values would have multiple values for that field in each row.

A relation in a relational database has a property called first normal form (1NF). Only when there are no attribute domains with relations as elements does a relation exist in first normal form. Or, to put it more casually, that no column in a table can have tables as values.

If a table satisfies the following requirements, it is in first normal form (1NF): The information is kept in a two-dimensional table. Repeating groupings don't exist. Therefore, comprehending the characteristics of a repeated group of data is essential to understanding 1NF.

To know more about data model visit:-

https://brainly.com/question/29651109

#SPJ4

The loop will be impacted if the remove call alters the list size after it enters the loop because it should utilize the correct list size after that.

It is feasible to create a function in Python's computational language that uses random. shuffle to create a list (lst). Create your own function to shuffle a list and return it without using random.shuffle(lst). Code creation: import arbitrary Defining shuffle(list): len = length (lst) in range(length) for I Change equals random.range (length - 1)  shift += shift >= I If lst[i], lst[change] is equal to lst[change], lst[i], lstst = [1,2,3,4,5,6] in return shuffle(list) print ("Shuffled Numbers:",lst) ("Shuffled Numbers:",lst). As a result, when the beginning is eliminated, the subsequent part advances. In the case of a LinkedList, a dynamic structure, the running time for removefirsthalf is O (n). The time required to execute removefirsthalf if lst is an Arraylist is O (n2

Learn more about Python's computational language here:

https://brainly.com/question/29578905

#SPJ4

The single-server queue model predicts an average of two clients waiting at any one time. To get, we cross-multiply. Consequently, we have = 0.25 x 8 C = 2.

In sales, commerce, and economics, a customer is the recipient of a good or service obtained from a seller, vendor, or supplier in exchange for money or some other form of compensation. The answer to the question yields the following formula for calculating Average Waiting Time under the Single-Server Queue Model: (Median Number of Customers Waiting in Line). The mathematical symbol for average waiting time, Lambda, has to do with arrival rate. We are 8 minutes behind schedule. We have an average arrival rate of 15 individuals each hour (60 minutes), or 15/60, or 0.25. Due to the aforementioned circumstances, the single-server queue model predicts an average of 2 customers waiting.

Learn more about Customer here:

https://brainly.com/question/15024311

#SPJ4

A model's  main function is to help one understand the complexities of the real-world environment.

Understanding human cognition and behavior in the "real world" is one of psychological science's most sought-after objectives. The "psychologist's laboratory" is an example of an experimental research setting, where research has typically been done. Psychology's laboratory studies have frequently been criticized for not allowing results to be generalized.

This dilemma is referred to as "real-world or the lab." Many scientists have advocated for experiments that have greater "ecological validity" in order to make the connection between the lab and the real world and to make findings more generalizable. However, researchers hardly ever define this term or explain how to increase ecological validity.

To know more about real world here

https://brainly.com/question/1645605

#SPJ4

A(n) _____'s main function is to help one understand the complexities of the real-world environment.

a. node b. entity

c. model d. database

The following are its components: a title for an account above the T's top horizontal line. Left is a debit side. Right on the credit side.

The three primary purposes of accounting are to gather and maintain financial information about a company's operations, to provide data for management reports, financial statements, and strategic planning, and to create controls that ensure data is accurately recorded and processed.

The T-shaped account, which shows credit balances visually on the right side and debit balances on the left, is a visual representation of accounting journal entries that a corporation records in its general ledger account and is shaped like the letter "T."

To know more about account visit:-

https://brainly.com/question/29830197

#SPJ4

Any fractional component of the calculation is lost when a Java programme tries to divide two integers (i.e. truncated). In this case, it can provide inaccurate results to assume that integer division rounds .

Java makes use of integer division when dividing two integers. The outcome of integer division is also an integer. The result is not rounded to the nearest integer but is instead truncated (the fractional part is ignored).

Java performs integer division, which is essentially the same as conventional real division, but you discard the leftovers (or fraction). Consequently, 7/3 is 2 and the remaining is 1. 

To know more about Java programme visit:-

https://brainly.com/question/15714782

#SPJ4

All forms of data and communications, including text, programs, photos, audio, and telemetry, can be affected by noise, which occurs in both digital and analog systems.

The exchange of data between two or more networked or connected devices is referred to as data communication.

These gadgets need to have the ability to transmit and receive data across a communication medium. Such gadgets include, for instance, laptops, mobile phones, and personal computers.

The smooth interchange of data between any two sites on the planet is the primary goal of data communication and networking.

Unwanted electrical or electromagnetic energy, or noise, lowers the signal and data quality.

Noise can have an impact on many types of data and communications, including text, programs, images, audio, and telemetry. This is true for both digital and analog systems.

Thus, this is the effect of white noise on data communications.

For more details regarding data communication, visit:

https://brainly.com/question/17630863

#SPJ1

Preventing user error is the main consideration while creating navigation controls.

Good design concepts must be taken into account while creating the user interface in detail. It doesn't matter what kind of user interface is being built; design principles like visibility, affordance, user shortcuts, feedback, closure, error messages, and reversal of actions are all crucial.

The development, visability, and acceptability of three variables should all be taken into account when designing a successful user interface. Developmental variables facilitate visual communication.

To know more about navigation controls visit :-

https://brainly.com/question/28146660

#SPJ4

For the purpose of monitoring the integrity of loudspeaker lines, which is a need for emergency sound systems, this end-of-line device is a dependable solution.

What Makes the end-of-line Resistor so Important?

An EOL or End of Line Resistor is used to complete a circuit. The circuit needs to be completed to pass the continuity-testing electricity across all the wires of the Class A or Class B circuit. On the panel, a problem is visible if the electricity quits.

The end-of-line resistor is the final component and is located at the end of the loop to enable the panel's inbuilt ohmmeter to verify the continuity of the wires (supervise the wires).

The ability to escape a fire is made possible by a properly installed fire alarm system, but there is a drawback. If, at the control panel or somewhere else in the building, something is wrong with the fire alarm system, the fire alarm system might not work.

To know more about resistors, check the link below:

https://brainly.com/question/2500996

#SPJ4

False. MAC operating systems are designed to allow users to easily open apps from unidentified developers.

MAC stands for Media Access Control and is a type of networking protocol used to control access to a network. It is a unique identifier assigned to a network interface on a device, allowing it to be identified by other devices on the same network. MAC addresses are hard-coded into a device's network interface, which makes them difficult to change. MAC addresses are used for a variety of purposes, including authentication, filtering, and routing. They are also used to identify the device's manufacturer and can help to detect intrusions or malicious activity on a network.

To do this, users will just need to go to their System Preferences, Security & Privacy, and click the “Allow apps downloaded from: Anywhere” option.

To learn more about MAC

https://brainly.com/question/29807945

#SPJ4

This lab gives us an excellent introduction to Vivado and clarifies the many file types, syntax, and even positive edge and reset signals in our code that we may use in projects.

The Xilinx ZynqTM-7000 family is the foundation of the ready-to-use embedded software and digital circuit development board known as the Zybo Z7. A dual-core ARM Cortex-A9 processor and Xilinx 7-series Field Programmable Gate Array (FPGA) logic are tightly integrated in the Zynq-7000.

The clocks for each of the PS subsystems are produced by the Zynq PS CLK input, which receives a 50 MHz clock from the ZYBO. The processor may function at a maximum frequency of 650 MHz thanks to the 50 MHz input, and the DDR3.

To know more about syntax visit:-

https://brainly.com/question/10053474

#SPJ4

Answer:

Trailer: It contains the error detection and error correction bits. It is also called a Frame Check Sequence (FCS).

Explanation:

In the context of data-link frames, the trailer is the final part of the frame structure. It typically contains two important components:

Frame Check Sequence (FCS): The FCS is a field in the trailer that is used for error detection. It is a checksum or a cyclic redundancy check (CRC) value calculated based on the contents of the entire frame, including the header, data, and sometimes the trailer itself.

End Delimiter: The end delimiter is a specific bit pattern or sequence of bits that marks the end of the frame. It helps the receiving device recognize the end of the frame and differentiate it from subsequent frames.

Thus, the trailer, along with the header and data, forms a complete data-link frame. It is used for reliable transmission of data across a network by incorporating error detection mechanisms and frame boundaries.

For more details regarding data-link frames, visit:

https://brainly.com/question/31497826

#SPJ6

The new job time after improving input by 50%, computation by 10%, and output by 20% is 63 seconds, a 21.25% improvement from the original 80 seconds.

Let's call the time to read in data T1, the time to complete the computational task T2, and the time to print the results T3. Then, the original job time was T1 + T2 + T3 = 10 + 20 + 50 = 80 seconds.

After improving the input by 50%, T1 becomes 10 / 2 = 5 seconds.

After improving the computation task by 10%, T2 becomes 20 * (1 - 0.10) = 18 seconds.

After improving the output by 20%, T3 becomes 50 * (1 - 0.20) = 40 seconds.

The new job time is T1 + T2 + T3 = 5 + 18 + 40 = 63 seconds. So the new job time is reduced to 63 seconds, which is a 21.25% improvement from the original job time of 80 seconds.

It's important to note that the improvement percentages are relative, so improving an operation by a certain percentage will result in a smaller absolute improvement as the time for that operation decreases. In this example, although the improvements in input and output times were both by 50% and 20% respectively, the absolute improvement in time for each operation was smaller as the time for each operation was reduced. This highlights the importance of continuously re-evaluating and optimizing all parts of a process to achieve the greatest overall improvement.

Learn more about process here:

https://brainly.com/question/13265520

#SPJ4

The interpreter-based speedcoding solution prioritized usability at the price of system resources. It included fictitious instructions for typical mathematical operations.

Speedcoding is a floating point three-address system that significantly eases programming and program checking out. Speedcoding offers simple loading, quick printing, built-in validation, and input-output procedures that are convenient. Speedcoding thereby significantly lowers the cost of programming and testing.

A typeless language has the advantage of flexibility, allowing every variable to hold values of any type. Due of how simple it is to make type errors and how difficult it is to have type checking catch them, the drawback is low reliability. 

To know more about speedcoding solution visit :-

https://brainly.com/question/16256006

#SPJ4

The payload is then enclosed in a packet that also includes quality of service tags, time-to-live data, checksums, media access control address, and IP information.

A standard Ethernet frame's data payload can range in size from 46 to 1500 bytes. This holds all of the information that is really being communicated from higher layers, such as the IP, transport, and application layers.

An Ethernet frame begins with a header, which includes information such as the source and destination MAC addresses. The actual data is located in the centre of the frame.

To know more about Ethernet frame's visit:-

https://brainly.com/question/29351780

#SPJ4

a precise bit-for-bit replication of data from an electronic device or related media, whose validity and integrity have been confirmed by a recognized algorithm.

The bit-stream forensic image is made in a minimum of two copies. An improper shutdown of a networked computer may result in the destruction of evidence, harm to the network infrastructure, interruption of corporate operations, and significant legal culpability.

Lawyers and forensic examiners also want to ensure that a bitstream image used in a case is error-free and unaltered. Using a special identification known as a "hash value," forensic investigators verify information.

To know more about bit-for-bit replication visit :-

https://brainly.com/question/2545808

#SPJ4

When formatting a large worksheet in Microsoft Excel to be printed, two commands that can help make the worksheet attractive and easier to read are "Page Layout" and "Format as Table."

The "Page Layout" function gives users access to a number of options for modifying the printed worksheet's overall appearance, including options for setting margins, choosing a paper size, and specifying the print area. The "Page Layout" command can also be used to add a header or footer to the worksheet, which can contain crucial details like the page number, the date, or a corporate logo.It is simpler to visually differentiate distinct pieces of data when you quickly format a range of cells as a table using the "Format as Table" command. To make the worksheet easier to read, the table formatting contains choices for adding alternate row shading and header row formatting.

learn more about worksheet here:

brainly.com/question/2554742

#SPJ4

A kachip that was sold to you to use in your home computer is an example of this: a final advantage.

In accounting, the tangible, valuable assets of a company are referred to as "fixed assets." They support a company's operations and last at least a year. Examples of fixed assets include automobiles, computers, and tools.

However, this standard applies to expenditures (like start-up costs) and other intangible assets used (like software) in the extractive or insurance industries. Computer software can be considered a long-term asset in the same way that land and buildings are.

To know more about computer visit :-

https://brainly.com/question/21080395

#SPJ4

Answer:

Well, it's essentially the old Windows Defender. Microsoft dropped it in Windows 8, so you can't use it in any Windows version past that.

Explanation:

The basic premise is that it would scan for malicious software like malware, spyware, trojan horses, ransomware and rootkits (which are pieces of software which grants the creator of the software access to your computer). It would monitor activities and constantly check for files that may be malicious - again, similar to Windows Defender.
It was introduced in Windows XP and dropped in Windows 8 - replaced by Windows Defender (I'll stop going on about that now.) - which does the same thing, just with updated databases and it's faster (sometimes).

Which VPN tunnelling method routes just specific traffic types? A VPN split tunnel limits the communication types that can pass through the VPN tunnel, typically based on the destination IP address.

Data is encrypted and the original IP address information is also encrypted when sent over the Internet using tunnel mode. Transport mode or tunnel mode are the two operating modes for the Encapsulating Security Payload (ESP). The data and the IP header information are both encrypted in Tunnel Mode by ESP.

In general use, there are three fundamental styles of tunnel construction: A cut-and-cover tunnel is one that is built in a small trench and subsequently covered. Bored tunnel built in place without removing the surrounding soil.

To know more about VPN visit:-

https://brainly.com/question/29432190

#SPJ4

You may sort records in the query design grid by adding a sort order to the fields you want to use. initial sorting records

In a query design grid, do the following steps to sort the records:

Note: To make sure the right field is chosen for sorting if you have many fields with the same name, you might need to mention the table name before the field name.

Learn more about query design grid here:

https://brainly.com/question/28487057

#SPJ4

Number a graphic file that has changed to a non graphic file cannot be previewed before signature analysis.

A file signature analysis is a process whereby file extensions and file headers are compared with a known database of file extensions and headers in an attempt to verify all files on the storage media and identify those that may be hidden.

Based on the given case where a file extension is changed to a non-graphic file type, such as fromjpg totxt, the file will not be displayed in the gallery view before a signature analysis.

Therefore, Number a graphic file that has changed to a nongraphic file cannot be previewed before signature analysis.

Learn more about graphic file on:

https://brainly.com/question/9759991

#SPJ1

Option D: Artificial neural networks are the data mining algorithm type used for classification that most closely resembles the biological neural networks in the human brain.

Computing systems called artificial neural networks are modelled after the biological neural networks seen in animal brains. Neural networks or neural nets are common names for these systems. An ANN's foundation is made up of a collection of interconnected units or nodes known as artificial neurons, which are loose replicas of the neurons in a biological brain. As a result, a computational model known as an artificial neural network (ANN) is made up of numerous processing elements that receive inputs and output outcomes in accordance with predetermined activation functions. Become familiar with artificial neural networks by reading. Artificial neural networks are the data mining algorithm type used for classification that most closely resembles the biological neural networks in the human brain.

Learn more about Artificial neural networks here:

https://brainly.com/question/29450159

#SPJ4

The customer id field is necessary to link the customer to their orders, so it should be added from the customers table.

The customer id field is necessary to properly link each order to the corresponding customer. Without this field, it would be impossible to accurately determine which orders belong to which customer. To ensure the accuracy of the query results, the customer id field should be added from the customers table. This allows the query to use the customer id to properly connect each order to the customer who placed it.

Learn more about customer id field: https://brainly.com/question/30265815

#SPJ4

No, this is not the correct way to record this data. A better method would be to record the data as the number of minutes, rather than as strings such as "60 minutes" or "1 hour".

This would make it easier to perform calculations on the data, and would also make it easier to compare the lengths of time between different classes.

Recording the length of time for classes in the Pitt Fitness database as numbers of minutes instead of strings such as "60 minutes" or "1 hour" makes it simpler to perform calculations and comparisons with the data. For example, if the user wanted to compare the length of different classes, they could simply compare the values of the 'lengthofTime' field instead of having to convert the string values into numbers.

Learn more about database: https://brainly.com/question/518894

#SPJ4

The four essential concepts of OOP are inheritance, polymorphism, encapsulation, and abstraction. Classes and objects are also present.

Object-oriented programming (OOP) is described as a paradigm for programming (rather than a particular language) that is based on the idea of objects, or a collection of data contained in fields, and code, or procedures, as opposed to the typical logic-based approach.

characteristics of the object-oriented programming paradigm The emphasis is on qualities and functions rather than on the process. External functions cannot access some data. A function operates on an object's properties. Messaging is a feature that lets objects talk to one another. oop design should be done from the bottom up.

To know more about encapsulation visit :-

https://brainly.com/question/13147634

#SPJ4