what's a good online University to attended for cyber security certificate.?

Explanation:

Definitions. Bit = Binary digIT = 0 or 1. Byte = a sequence of 8 bits = 00000000, 00000001, ..., or 11111111. Word = a sequence of N bits where N = 16, 32, 64 depending on the compute

Answer: 5 × 10^8 cycles per second

Explanation:

First and foremost, we should note that 1 nanosecond = 1 × 10^-9 seconds

We are told that the machine cycle is 2 nanoseconds.

The number of machine cycles that occur each second will them be calculated as:

1 = 2 × 10^-9

= 5 × 10^8 cycles per second

The number of machine cycles that occur each second is 5 × 10^8 cycles per second.

oh, why thank you same to you

Answer:

The complete program is:

#include <stdio.h>

double StepsToMiles(int userSteps){

   return userSteps/2000.00;

}

int main(void) {

   int userSteps;

   printf("User Steps: ");

   scanf("%d",&userSteps);

   printf("%0.2f", StepsToMiles(userSteps));

   return 0;

}

Explanation:

This line defines the function

double StepsToMiles(int userSteps){

This returns the required output by dividing userSteps by 2000.

We used 2000.00 because we want it to return a floating point number

   return userSteps/2000.00;

}

The main begins here

int main(void) {

This declares userSteps as integer

   int userSteps;

This prompt user for input

   printf("User Steps: ");

This gets user input

   scanf("%d",&userSteps);

This calls the function and also returns the required output to 2 decimal places

   printf("%0.2f", StepsToMiles(userSteps));

   return 0;

}

Answer:

Coral Language Code

A pedometer treats walking 2,000 steps as walking 1 mile. Define a function named StepsToMiles that takes an integer as a parameter, representing the number of steps, and returns a float that represents the number of miles walked. Then, write a main program that reads the number of steps as an input, calls function StepsToMiles() with the input as an argument, and outputs the miles walked.

Output the result with four digits after the decimal point, which can be achieved as follows:

Put result to output with 4 decimal places

If the input of the program is:

5345

the function returns and the output of the program is:

2.6725

Your program should define and call a function:

Function StepsToMiles(integer userSteps) returns float numMiles

Explanation:

Function StepsToMiles(integer userSteps) returns float numMiles

  numMiles = userSteps / 2000.0

Function Main() returns nothing

  float result

  integer userSteps

  userSteps = Get next input

  result = StepsToMiles(userSteps)

  Put result to output with 4 decimal places

Answer:

1.  A high level algorithm for cooking a cheeseburger could be:

2. A detailed algorithm for cooking a cheeseburger could be:

Explanation:

An algorithm is simply a list of steps to perform a defined action.

On 1, we described the most relevant steps to cook a simple cheeseburger.

Then on point 2, the same steps were taken and expanded with more detailed steps and conditions required to continue executing the following steps.

In computational terms, we used pseudo-code for the algorithm, since this is a list of actions not specific to any programming language.

Also we can say this is a structured programming example due to the sequential nature of the cooking process.

Answer:

Hope this helped!

Explanation:

A computer software is anything that lets you work with computers what happens inside it, and hard ware is the actual computer and its parts, so no a computer hardware CANNOT work without a software.

Answer:

computer software is the collection of data or computer instructions that tell computer how to work.

Hardware and software are interconnected to each other, with software the hardware of computer wouldn't have any function.

Answer:

yuppp

Explanation:

i looked it up lol

Answer:

import java.util.Scanner;

public class Payroll {

   //set variable field

   private String name;

   private int idNumber;

   private double hourlyRate;

   private int hoursWorked;

   private double grossPay;

   //methods to get values of private class variables

   public String getName()

    {

        return name;

    }

   public int getIdNumber()

   {

      return idNumber;

   }

   public double getHourlyRate()

   {

       return hourlyRate;

   }

   public int getHoursWorked()

   {

       return hoursWorked;

   }

   public double getGrossPay()

   {

      return hoursWorked * hourlyRate;

   }

   //methods to initialize or change the private class values.

   public void setName( String nameGiven)

   {

       name = nameGiven;

   }

   public void setIdNumber(int idNumberGiven)

   {

       idNumber = idNumberGiven;

   }

   public void setHourlyRate(double rateGiven)

   {

       hourlyRate = rateGiven;

   }

   public void setHoursWorked(int hoursGiven)

   {

      hoursWorked = hoursGiven;

   }

   //Constructors

   public Payroll(String nameGiven, int idNumberGiven, double rateGiven, int hoursGiven)

   {

       name = nameGiven;

       idNumber = idNumberGiven;

       hourlyRate = rateGiven;

        hoursWorked = hoursGiven;

   }

   public static void main(String[] args)

   {

       double userGrossPay;

       String userEmplName;

       int userIdNum;

       double userRate;

       int userHours;

       Scanner scanner = new Scanner(System.in);

       System.out.print("Enter employee's name:");

       userEmplName = scanner.nextLine();

      System.out.print("Enter employee's ID number:");

       userIdNum = scanner.nextInt();

       System.out.print("Enter hourly rate:");

       userRate = scanner.nextDouble();

       System.out.print("Enter number of hours worked:");

       userHours = scanner.nextInt();

        Payroll payroll1 = new Payroll(userEmplName, userIdNum, userRate, userHours);

      payroll1.setName(userEmplName);

       payroll1.setIdNumber(userIdNum);

       payroll1.setHourlyRate(userRate);

       payroll1.setHoursWorked(userHours);

       System.out.printf(userEmplName + ", employee number " + userIdNum + ", made $%.2f in gross pay.\n", payroll1.getGrossPay());

}

}

Explanation:

The class "Payroll" is used to hold data of employees to be paid. the main function creates an instance of the class "payroll1", sets the name, id-number, hourly rate, and hours worked by the employee, then prints on screen the details of the payroll1 object.

Answer:

SOA

Explanation:

Statement of Authority, or you could also say that the zone that has been created is a reverse lookup

Answer: layout, section, number, more options

Explanation:

Just did it on edge 2020

Answer:layout

Section

Number

More options

Explanation: got an A on the test

Answer:

tryagain = "Y"

while tryagain.upper() == "Y":

    x1 = int(input("x1: "))

    y1 = int(input("y1: "))

    x2 = int(input("x2: "))

    y2 = int(input("y2: "))

    x3 = int(input("x3: "))

    y3 = int(input("y3: "))

    area = abs(x1 *(y2 - y3) + x2 * (y1 - y3) + x3 * (y1 - y2))

    if area > 0:

         print("Inputs form a triangle")

    else:

         print("Inputs do not form a triangle")

    tryagain = input("Press Y/y to try again: ")

Explanation:

To do this we simply calculate the area of the triangle given that inputs are on plane coordinates i.e. (x,y).

If the area is greater than 0, then it's a triangle

If otherwise, then it's not a triangle.

This line initializes iterating variable tryagain to Y

tryagain = "Y"

while tryagain.upper() == "Y":

The following lines get the coordinates of the triangle

    x1 = int(input("x1: "))

    y1 = int(input("y1: "))

    x2 = int(input("x2: "))

    y2 = int(input("y2: "))

    x3 = int(input("x3: "))

    y3 = int(input("y3: "))

This calculates the area

    area = abs(x1 *(y2 - y3) + x2 * (y1 - y3) + x3 * (y1 - y2))

This checks for the condition stated above.

    if area > 0:

         print("Inputs form a triangle") This is printed, if true

    else:

         print("Inputs do not form a triangle") This is printed, if otherwise

    tryagain = input("Press Y/y to try again: ") This prompts the user to try again with another set of inputs

Answer:

Explanation:

The following loop code is written in Java and asks the user for the 6 integer numbers as mentioned in the question and sums them up. Finally putting them into a variable named total and printing it out.

       int total = 0;

       for (int x = 0; x < 6; x++) {

           Scanner in = new Scanner(System.in);

           System.out.println("Enter an integer: ");

           total += in.nextInt();

       }

       System.out.println("Your total is: " + total);

Answer:

Answered below

Explanation:

Remote access enables access to an organisations network from remote places. Certain conditions require such access. An organisation might require their workforce to work from home especially in this coronavirus health pandemic situation. Therefore remote access is necessary.

Also attending to customers needs, virtual meetings and connections to workers and clients all over the world, can only be made possible by the implementation of secured remote access, by the organisation.

Answer:

Explained below

Explanation:

Compare and Swap(C&S) is simply an atomic operation whereby the compare and swap operations are automatically executed.

Now compare and Swap basically needs 3 arguments namely:

- 2 old values which we will label X and Y

- 1 new value which is written in X that we will call Z

Thus, we now have; C & S = {X, Y, Z}

To explain this well, let X be a variable where X has a value of 7.

Now, if a programmer gives a program me that X be multiplied by 2,then what C&S operation will do is;

I) Y = X where Y is a new variable.

II) Result = C&S(X, Y, X*7)

Variable X is global and this means that mere than one process and more than 1 thread can see the variable X.

Now, if a process named P1 wants multiply the variable X by 7 using C&S operation, it will first make a local copy of variable X (which in this case is now the new variable Y). After that it will atomically compare X & Y and if they are equal, it will replace X with 10X.

However, if they are not equal, P1 will re-read value of X into Y and carry of C&S instruction again.

Answer:

no why

Explanation:

Answer:

c. hypertext software.

Explanation:

In Computer science, a hypertext can be defined as textual informations that are being displayed on a computer system and these texts usually links to other informations (texts) that the user can easily have access to in real-time.

Basically, some developers include encyclopedias and dictionaries in their software database, which makes other necessary informations or contents easier and immediately accessible to the users through the use of hypertexts that is activated by pointing and clicking on the link with a mouse, keypress set or soft touching the screen.

Hence, a technology that can help a student to increase his or her understanding of the vocabulary used in a classroom is called hypertext software.

Answer:

Following are the code to this question:

#include<stdio.h>//defining header file

//using namespace std;

int main()//defining main method

{

float MTBF, MTTR, Total_up;//defining float variable

Total_up = (4 * 24) - 9;//defining Total_up variable that calculate Total uptime value

MTBF = Total_up / 3.0;//defining MTBF variable that calculate its value

MTTR = 9 / 3;//defining MTTR that calculate its value

printf("\n The total value of MTBF: %f",MTBF);//print value with message

printf(" \n The total value of MTTR: %f ",MTTR);//print value with message

return 0;

}

Output:

The total value of MTBF: 29.000000  

The total value of MTTR: 3.000000  

Explanation:

In the above-given code, three float variable "MTBF, MTTR, and Total_up" is defined, in the next step the "Total_up" variable is defined, that holds a value to calculate its value.

In the next step, the "MTBF, and MTTR" variable is defined, and in the "MTBF" variable, it uses Total_up variable value to calculate its value and use the print method to print the "MTBF and MTTR" value.

Answer:

statement = input("Enter four words separated by a space: ")

split_list = statement.split(" ")

print(f"{split_list[0]} went to {split_list[1]} to buy {split_list[2]} different types of {split_list[3]}")

Explanation:

The python program uses the input function to get user input from the STDIN and the words gotten are splitted to a list, then the items of the list are used as part of a sentence.

Answer:

Playing around with this and came up with this, it took about an hour before I understood what it was wanting.

first_name = input()

generic_location=input()

whole_number= input()

plural_noun= input()

print(first_name, 'went to', generic_location, 'to buy', whole_number, 'different types of', plural_noun)

Explanation:

I didnt understand it at first until I thought about it.  This would be the answer if you are looking for it.

Questions:

CS Code Practice 1.8  Question 1:

Write a code that accepts the user's age as an input, then print their age in 10 years.

CS Code Practice 1.8  Question 2:

Write a code that accepts a whole number as an input, subtracts 5 and print the answer

Answer:

Question 1:

currentage = int(input("Enter your age: "))

print("Your age in 10 years is "+str(currentage + 10))

Question 2:

userinput = int(input("Enter a whole number: "))

print(str(userinput)+" - "+str(5)+" = "+str(userinput - 5))

Explanation:

There are two questions in this category and I don't know which of them you need; So, I answered both.

Question 1:

This line prompts user for age

currentage = int(input("Enter your age: "))

This line adds 10 to user input and prints the result

print("Your age in 10 years is "+str(currentage + 10))

Question 2:

This line prompts user for a whole number

userinput = int(input("Enter a whole number: "))

This line subtracts 5 from the whole number and prints the result

print(str(userinput)+" - "+str(5)+" = "+str(userinput - 5))

Answer:

This question is answered using Java programming language:

public static void print10(String[]arr){

    for(int i =0; i<10;i++){

System.out.println(arr[i]);

    }

}

Explanation:

This line defines the method

public static void print10(String[]arr){

This iterates from 0 to 9 index of the array. In other words, 1st to 10th

    for(int i =0; i<10;i++){

This prints the required output (one on a line)

System.out.println(arr[i]);

    }

}

Refer to attachment for the complete program that includes the main method.

Following are the program to count array words:

Program Explanation:

Program:

public class Main //defining a class Main

{

private static void print10(String[] di)//defining a method print10  

{

System.out.println("First 10 words in string array: ");//print message

for(int i=1; i<11; i++)//defining a loop that prints array value

{

System.out.println(i+"\t "+di[i]);//print array value

}

}  

public static void main(String[] a) //defining main method

{

String[] di = {"Alpha", "Bravo", "Charlie", "Delta", "Echo", "Foxtrot", "Golf", "Hotel", "India", "Julie", "Kilo", };//defining array of String that hold value

print10(di);//calling method and print its value

}

}

Output:

Please find the attached file.

Learn more:

brainly.com/question/7052857

You're not adding your temperature to the total so total will always be 0. Do something like this:

total += float(input("Enter Temperature: "))

You can directly add the user entered value without creating an extra variable.

Answer:

Explanation:

The answer is false

Because the 4 elements are shapes texture colour and size

Answer:

The static n variable is incremented twice and the results printed in the console but the output of the x variable remains constant.

Explanation:

The while loop in the C++ source code increments the n variable as the argument of the function "a" is decremented. The n variable output is 0,1, and 2 while the x variable is 0 for every iteration.

Answer:

All of these answers

Explanation:

A computer's physical components must be inspected, updated, and maintained over time to keep them functioning at their best. This process is known as hardware maintenance. Thus, option B is correct.

Regular hardware maintenance typically aids companies in avoiding unforeseen problems like device damage and severe data loss.

Regular hardware repair of servers and other physical parts enables businesses to retain their operational integrity and keep a stable IT infrastructure.

While corrective maintenance entails replacing or repairing a system or its components after they have already failed, preventive maintenance encompasses actions that can be taken to keep the system operating.

Therefore, Preventive and corrective maintenance are the two key elements of system upkeep.

Learn more about Hardware here:

https://brainly.com/question/28146743

#SPJ2

Answer:

Bank card and discount coupon

Explanation:

Answer:

D. 256

Explanation:

Given

[tex]Instructions = 8\ bit[/tex]

Required

Determine the maximum number of output

To get the required value, we make use of the following:

[tex]Maximum = 2^n[/tex]

Where n is the bits of the opcode.

i.e.

[tex]n = 8[/tex]

Substitute 8 for n in [tex]Maximum = 2^n[/tex]

[tex]Maximum = 2^8[/tex]

[tex]Maximum = 256[/tex]

Hence, option D answers the question

Answer:

SELECT resid_city, avg(convert(float,age))

  FROM customer

 GROUP BY resid_city

Explanation:

SQL or structured query language is a language used to interact with databases. It is a relational database language, used to create, update, and query the content of databases.

The "SELECT" clause in the query statement above is used to read the content of the customer table querying the table based on the average age of customers grouped by their resident cities to return the "resid_city" and the float number of the average age.

Answer:

SELECT Order_date, Ship_Date, Order_priority, Ship_mode

FROM orders

JOIN Shipping ON Orders.Order_id = Shipping.Order_id

WHERE Order_date

BETWEEN TO_DATE('04/01/2018', '%m/%d/%Y') AND TO_DATE('04/15/2018', '%m/%d/%Y')

ORDER BY Order_date

Explanation:

The SQL statement above queries a database with four tables shipping, orders, market and product. The query returns four columns from two tables orders and shipping, returning only rows with order dates between April 1 and April 15 of 2018. The tables are joined with the primary key order_id and the dates are parsed with the to_date function. The result is also ordered by the order_date