what would happen if the earth stopped spinning for 1 second

The time is increased and as a result the effect of force is decreased since force is inversely proportional to time, hence the force decreases.

Impact forces are inversely correlated with collision time and inversely correlated with the change in momentum that occurs during a collision.

The power felt by a boxer as they move away from a blow is lessened since the strike has more time to make contact with them. Impulse is the result of the power and the moment of application, and this notion explains why "rolling with the punches" in boxing is effective.

Rolling against a punch shortens the time but decreases the force of contact.

To know more about the Impact forces, here

brainly.com/question/16843743

#SPJ4

Since approximately 95% of the heights fall between 63 and 73 inches, this means that the range of values within two standard deviations of the mean captures 95% of the data.

Therefore, the standard deviation can be roughly expressed as:

(73 - 68) / 1 5 is the standard deviation.

To know more about average height , check out :

https://brainly.com/question/30400856

#SPJ4

Displacement is negative when an object moves in the negative direction. The initial position will be further in the positive direction than the final position.

Displacement is a term used in physics to describe the change in position of an object with respect to its initial position. In other words, it is the distance and direction between an object's starting point and its end point.  To calculate displacement, you need to know the object's starting point and end point. The displacement can be positive or negative, depending on the direction of the movement.

Displacement is a vector quantity, which means that it has both magnitude (the distance between the two points) and direction (the direction from the starting point to the end point). It is often represented by an arrow, with the length of the arrow representing the magnitude of the displacement, and the direction of the arrow representing the direction of the displacement.

To learn more about Displacement visit here:

brainly.com/question/28609499

#SPJ4

By prolonging contact with the punch, the impact power is lessened. Impulse is the result of the product of the force and the application time.

The word "force" has a clear definition. At this level, calling a force a push or a pull is entirely appropriate. A strength is not a property an object "already has in" or that it "contains."

An acceleration-inducing push is referred to as a force. This can literally mean pushing anything, such as moving a large piece of furniture around a room by pushing on it. It might not be as concrete as pressing the gas pedal on a car.

To know more about Force visit:

https://brainly.com/question/13191643

#SPJ4

The can collapses because of the difference in air pressure between the inside and outside of the can and the decrease in air pressure inside the can caused by the condensation of the steam.

Here when the teacher cools the can, some of the steam turns back into water, and as a result, the air pressure inside the can decreases. The reason for this is due to the collisions as when the steam condenses back into water, due to a decrease in the air pressure,

Hence, the can collapses because of the difference in air pressure between the inside and outside of the can and the decrease in air pressure inside the can caused by the condensation of the steam.

Learn more about the collision here.

https://brainly.com/question/13138178

#SPJ9

The new pressure is 2 atm. So the correct answer is (A).

The ideal gas law states that PV = nRT, where P is pressure, V is volume, n is the number of moles of gas, R is the gas constant, and T is temperature in Kelvin.

Since the gas is ideal, the number of moles and the gas constant remain constant, so we can write:

[tex]P1V1/T1 = P2V2/T2[/tex]

where P1, V1, and T1 are the initial pressure, volume, and temperature, and P2 and V2 are the final pressure and volume.

We are given that the initial pressure is 1 atm, the final volume is half the initial volume, and the final temperature is double the initial temperature. Since temperature is measured in Kelvin, we need to convert the initial temperature of 273 K to 546 K for the final temperature.

Plugging these values into the equation above, we get:

[tex](1 atm)(V1)/(273 K) = (P2)(V1/2)/(546 K)[/tex]

Simplifying, we get:

[tex]P2 = (1 atm)(273 K)/(V1/2)(546 K)[/tex]

P2 = 2 atm

Learn more about Ideal gas law, here:

https://brainly.com/question/28257995

#SPJ1

The washer method for calculating volume uses the formula V = integration sign (πR² - πr²)dx.

Washer method is the method aimed to calculate volume of the solid shape using calculus. Washer is a shape which obtained on rotating the functions around x-axis or y-axis on the graph. The washer formula is derived by firstly calculating the area followed by more further calculations moulding it for volume.

So, the formula is -

V = integration sign (πR² - πr²)dx, where R is the external radius and r is the internal radius. Remember that volume is the capacity of any object or shape to contain it's constituents.

Learn more about volume -

https://brainly.com/question/463363

#SPJ4

An astronaut who fell into black hole would be stretched be : b. the gravity changes dramatically over short distance.

Black hole is a place in space where gravity pulls so much that even light can not get out and the gravity is so strong as the matter has been squeezed into tiny space. This can happen when star is dying. As no light can get out, people can't see black holes and they are invisible.

Black hole is a region of spacetime where gravity is so strong that nothing, including light or electromagnetic waves, has energy to escape its event horizon.

To know more about black holes, refer

https://brainly.com/question/28021660

#SPJ4

The ratio of the fraction of helium atoms that have a speed between 999 m/s and 1001 m/s to the fraction of neon atoms in the same range of speeds can be calculated using the Maxwell-Boltzmann distribution function. The Maxwell-Boltzmann distribution function is given by:

[tex]f(v) = (m / 2πkT)^(3/2) * 4πv^2 * e^(-(mv^2) / (2kT))[/tex]

Where m is the mass of the gas molecule, k is the Boltzmann constant, T is the temperature, and v is the speed of the gas molecule.

To find the fraction of helium atoms that have a speed between 999 m/s and 1001 m/s, we need to integrate the Maxwell-Boltzmann distribution function from 999 m/s to 1001 m/s with respect to v:

[tex]∫_(999)^(1001) f(v) dv[/tex]

Similarly, to find the fraction of neon atoms that have a speed between 999 m/s and 1001 m/s, we need to integrate the Maxwell-Boltzmann distribution function from 999 m/s to 1001 m/s with respect to v, but with the mass of neon instead of the mass of helium:

[tex]∫_(999)^(1001) f(v) dv[/tex]

The ratio of the fraction of helium atoms that have a speed between 999 m/s and 1001 m/s to the fraction of neon atoms in the same range of speeds is then given by:

[tex](∫_(999)^(1001) f(v) dv) / (∫_(999)^(1001) f(v) dv)[/tex]

Where the first integral is with respect to the mass of helium and the second integral is with respect to the mass of neon.

Without knowing the values of the mass of helium, the mass of neon, the Boltzmann constant, and the temperature, we cannot calculate the exact value of the ratio. However, we can say that the ratio will be smaller than 1, since the mass of neon is greater than the mass of helium and the Maxwell-Boltzmann distribution function is inversely proportional to the mass of the gas molecule.

Learn more about fraction of helium and neon atoms:

https://brainly.com/question/15096674

#SPJ11

The given statement "The skateboarder is moving in the direction of the net force." is  , b. Sometimes true.

The acceleration of the skateboarder depends on the net force acting on them and the mass of the skateboarder. The direction of the acceleration is in the same direction as the net force. However, the direction of the skateboarder's b may not always be in the same direction as the net force. For example, if the skateboarder is moving up a ramp, the net force may be acting downward due to gravity, but the skateboarder's motion is still upward. Therefore, statement a is not always true, but it can be true in certain situations.

To know more about acceleration, here

https://brainly.com/question/12550364

#SPJ4

The best long-term solution to the pressing energy problems in the United States is a combination of different strategies that aim to increase the use of renewable energy sources, reduce energy consumption, and improve energy efficiency.

Some of these strategies are:

Transitioning to renewable energy sources: The United States needs to shift its reliance on fossil fuels to renewable energy sources such as wind, solar, hydro, and geothermal. This will not only help to reduce greenhouse gas emissions but also create jobs and stimulate economic growth.

Improving energy efficiency: Another important step is to improve energy efficiency in buildings, industries, and transportation. This can be achieved by using energy-efficient technologies, building design, and better transportation planning.

Investing in research and development: There is a need for more investment in research and development of new energy technologies that can help to address the pressing energy problems. This can include new battery technologies, advanced nuclear power, and carbon capture and storage.

Encouraging behavior change: Another crucial step is to encourage behavior change in individuals and businesses to reduce energy consumption. This can be achieved through education, awareness campaigns, and incentives for energy-efficient behavior.

Overall, the best long-term solution to the pressing energy problems in the United States will require a comprehensive approach that integrates these and other strategies to create a more sustainable and resilient energy system.

To learn more about pressing energy problems here:

https://brainly.com/question/30873107

#SPJ4

If the torque required to loosen a nut that is holding a flat tire in place on a car has a magnitude of 44 N · m,  191.3 N of minimum force must be exerted by the mechanic at the end of a 23 cm-long wrench to loosen the nut.

The minimum force required to loosen the nut can be found using the formula: force= torque/lever arm,where torque is the torque required to loosen the nut, and the lever arm is the distance between the center of the nut and the point where the force is applied.

In this case, the torques are 44 N.m and the lever arm is 23 cm or 0.23 m. therefore the minimum force required to lose the nut is :

force=44 N.m/0.23 m =191.2 N, so the force minimum force that the mechanic must exert at the end of the 23 cm long wrench to loosen the nut is 191. N

To know more about torque refer to the link   brainly.com/question/25708791

#SPJ4

According to Copernicus, the Earth's rotation on its axis is what causes the daily motions in the heavens.

According to Nicholas Copernicus' (1473–1543) Copernican paradigm, the sun is a stationary body at the centre of the universe, and all other bodies are said to rotate around it. Hence, the daily rising and setting of heavenly bodies are caused by the Earth's rotation on its axis.Copernicus was a Renaissance-era astronomer who proposed that the Earth and other planets revolved around the Sun. This was a revolutionary idea at the time, as most astronomers believed that the Earth was the center of the universe. His theory, known as the heliocentric model, revolutionized the way we think about our place in the universe and helped to usher in the scientific revolution.

read more about Copernicus here:

brainly.com/question/926131

#SPJ4

The buoyant pressure is the upward force a fluid exerts on an item. Archimedes' precept is the fact that buoyant force is identical to the weight of the displaced fluid.

Buoyancy is a physical phenomenon that describes the upward force this is exerted on an item submerged in a fluid, inclusive of water or air. This pressure is a result of the pressure differences between the top and backside of an item in a fluid, and it is referred to as buoyant pressure.

The study of buoyancy is important in various fields, including naval architecture, oceanography, and engineering. For example, understanding buoyancy is crucial for designing ships and submarines that can float and maintain stability in water, as well as for developing buoyancy systems for offshore oil and gas drilling. Buoyancy also plays a key role in meteorology, as it affects the movement of air masses and the formation of clouds and precipitation.

To learn more about Buoyancy visit here:

brainly.com/question/19168433

#SPJ4

The product of force and distance is known as work.

Work is defined as the result of the force exerted on an object and the distance it was applied over. In mathematics, work is denoted by the equation W = Fd, where W stands for work, F for force, and d for distance. The amount of work completed when a force of one Newton is applied over a distance of one metre is known as a joule (J), which is the SI unit of work.

A fundamental idea in both physics and engineering, work is a significant quantity in many real-world contexts, including energy conversion, mechanical systems, and thermodynamics. The word "labour" refers to the process of transferring energy, and it is closely related to the terms "power," "energy," and "force."

Learn more about Work here:

https://brainly.com/question/18094932

#SPJ4

A car traveling at 50 mph can be stopped in roughly 229 feet under ideal conditions, including reaction time.

When several atoms or molecules with the proper orientation and the least amount of energy efficiently collide, a reaction happens. Rate of reaction are the molecules that commence a chemical change, whereas products are the molecules that are formed as a consequence of the reaction.

Two features of nuclear reactions are the formation of new bonds between carbon molecules in resultant particles and the establishment of molecular links amongst individual atoms (particles) (molecules). The quantity of structures changes despite the fact the number of atoms is the same before and after the chemical transition.

To know more about reaction visit:

https://brainly.com/question/28984750

#SPJ4

a) Solar energy works when the sun shines on a solar panel and the PV cells in the panel absorb the energy from the sunshine.

b) The sun is where solar energy comes from.

c) Photovoltaic (PV) cells, which are found in solar panels, are used to collect solar energy and convert it into usable electricity.

d) A variety of appliances may utilize solar energy, and it can be used to generate power.

Photovoltaic (PV) cells, which are found in solar panels, are used to collect solar energy and convert it into usable electricity.

As sunlight reaches the PV cells, it generates an electric field that flows as electricity.

This electricity may be used to power homes, businesses, and other electrical devices, as well as be stored in batteries for later use. The two main types of solar energy systems are photovoltaic and solar thermal.

Learn more about solar energy at

https://brainly.com/question/9704099

#SPJ4

The expression for the volume charge density of an infinitely long insulating cylinder of radius r is given by:

ρ(r) = ρ₀ / (1 + (r/a)^2)^(3/2) * (1 – (r/b)^2)^(3/2)

where ρ₀, a, and b are positive constants, and r is the distance from the axis of the cylinder. This expression shows that the charge density decreases with increasing radius, as the denominator increases more quickly than the numerator.

Additionally, the constants ρ₀, a, and b all affect the rate at which the charge decreases with increasing radius. The larger the value of ρ₀, the more quickly the charge density decreases with increasing radius, so it is important to choose the correct values for these constants in order to accurately model the charge distribution.

Learn more about volumetric loading density :

https://brainly.com/question/28794435

#SPj4

Conduction is the transfer of heat energy between two objects or substances that are in contact with each other, due to a temperature difference between them.

Conduction is the transfer of heat or electrical energy through a material or substance, without any visible movement of the substance itself. It occurs in solids, liquids, and gases, but is most efficient in solids, where the molecules are tightly packed and can easily transfer energy from one to the other. In conductive materials, heat or electrical energy is transferred by the flow of electrons, atoms, or molecules from a region of higher energy to a region of lower energy.

The rate of conduction depends on several factors, including the temperature difference between the two regions, the physical properties of the material, and the distance between the two regions. Conduction is an important process in everyday life, and understanding its principles is crucial in many fields, including engineering, physics, and materials science.

To learn more about Conduction visit here:

brainly.com/question/12136944

#SPJ4

When the period of an orbit varies with regard to the eccentricity, it indicates that the period is reliant on the eccentricity and that the period will vary as the eccentricity changes.

The period of an object in orbit around another object is the time it takes for the object to complete one full orbit. The period depends on several factors, including the distance between the two objects and the eccentricity of the orbit.

In general, the period of an orbit is longer for orbits with higher eccentricity. This is because an orbit with higher eccentricity spends more time at its furthest distance from the central object, and therefore has a longer distance to travel to complete one full orbit.

The relationship between the period and eccentricity of an orbit is described by Kepler's laws of planetary motion. Kepler's third law states that the square of the period of an orbit is proportional to the cube of the semi-major axis of the orbit. Since the semi-major axis of an elliptical orbit depends on the eccentricity, this means that the period also depends on the eccentricity.

Specifically, the period of an elliptical orbit increases as the eccentricity of the orbit increases. This means that a change in the eccentricity of an orbit will result in a corresponding change in the period of the orbit. If the eccentricity of an orbit increases, the period will increase, and if the eccentricity of an orbit decreases, the period will decrease.

For more questions on eccentricity-

https://brainly.com/question/29484069

#SPJ4  

The frequency of sound waves remains the same or is unaffected when sound moves from air into water. The correct option is D

Some properties of sound waves will change when it passes from air to water.

The wave's wavelength will lengthen when it passes through the boundary and enters the water.

Because some sound is reflected by the water's surface, the intensity of sound in the water will be lower than it was in the air.

However, because a crest moves away from the border every time a crest approaches it, the frequency will remain the same.

Learn more about sound waves at: https://brainly.com/question/16093793

#SPJ1

Complete question:

What happens to a sound wave as it travels from air into water? (a) Its intensity increases. (b) Its wavelength decreases. (c) Its frequency increases. (d) Its frequency remains the same. (e) Its velocity decreases.

Answer:

Explanation:

To solve this problem, we need to use the formula for centripetal force:

F = (mv^2) / r

Where:

F = centripetal force

m = mass of the object

v = velocity of the object

r = radius of the circular path

Assuming the mass of the runner is 70 kg, we can plug in the given values and solve for the centripetal force:

F = (70 kg)(8.8 m/s)^2 / 25 m

F ≈ 217.6 N

Therefore, the centripetal force required to keep the runner moving in a circular path with a radius of 25 m and a speed of 8.8 m/s is approximately 217.6 N.

That location has a 16.72 N string tension.

The acceleration at the bottom of the circle is merely normal (because there are no forces acting in the horizontal direction) and equal to the centripetal acceleration as follows:

ac = v2/r = 2*r T- m*g = m*2*r

The following is how we can solve for T using the givens as replacements:

T = m* (2*r+g) = 0.4 kg*((8.00)2 rad/sec2*0.5m)+9.8 m/s2) = 16.72 N.

The pace at which something rotates is its angular speed, which is measured in terms like r.p.m, degrees per seconds, etc. The linear speed is how quickly a point on the edge of an object moves in a circle around the item's center.

To know more about Angular speed visit:

https://brainly.com/question/15584705

#SPJ4

the lowest theoretical temperature that can exist in the universe on the Kelvin scale is zero kelvin (0 K)

Absolute zero, technically known as zero Kelvin, corresponds to -273.15 degrees Celsius or -459.67 degrees Fahrenheit and marks the point on the thermometer where the system reaches the lowest possible energy or thermal motion. However, there is a catch.

Absolute zero cannot be reached.

Two of the most commonly used temperature measurement scales in the thermometer industry are the Kelvin and Celsius scales. A value of 1 degree on the Kelvin scale is the same as a value of 1 degree on the Celsius scale. That is, the temperature difference or temperature change is the same on both scales.

You can use this relationship to convert Celsius to Kelvin.

Celsius = (Kelvin - 273.15)

0r

Kelvin = (Celsius + 273.15)

The Kelvin to Celsius formula is used to convert temperature expressed in Kelvin to Celsius.  

know more about kelvin click here;

https://brainly.com/question/30656288

#SPJ4

Answer: The answer is D.

Explanation:

The way A is shooting arrows away means its a negative current. On the other hand B is taking them in making B positive. and that's why the answer is D.

Storm signal number 1 is a form of weather caution issued via the Philippine Atmospheric, Geophysical, and Astronomical Services Administration (PAGASA) to alert the public to the opportunity of a tropical cyclone entering the USA.

When a storm sign number 1 is raised, it method that a tropical cyclone, along with a tropical despair or tropical hurricane, is expected to affect a particular region within the next 36 hours.

The winds related to the cyclone aren't yet strong sufficient to cause widespread harm, but they may be sufficient to disrupt transportation and different outside sports.

Throughout storm sign number 1, the general public is cautioned to be vigilant and take precautions, which include securing loose items and staying indoors if feasible.

Fishermen are recommended to keep away from going out to sea, and small vessels are cautioned to take refuge. PAGASA issues hurricane signal warnings up to a wide variety of five, with better numbers indicating more intense climate situations.

The warnings are a crucial tool for helping the general public to put together for and stay safe throughout tropical cyclones, which could reason extensive damage and loss of life within the Philippines.

Learn more about storm signal:

https://brainly.com/question/30388216

#SPJ4

if a solution's maximum absorbance is measured at 445 nm from The hue of the solutions is mostly determined by the visible region of the spectrum Blue

The useful absorbance range for the majority of spectrometers and colorimeters is between 0.1 and 1. Values of absorbance more than and similar to 1.0 are excessive. Your solution is overly concentrated if the absorbance readings you are getting are 1.0 or higher.

wavelength From 390 to 500 nm, blue light represents visible light. Blue light is divided into blue-violet light and blue-turquoise light (380–450 nm) (450 to 500 nm). Blue light is around yet another of all visible light.

To know more about wavelength visit :

https://brainly.com/question/29398067

#SPJ4

The moon is brightest during which of these events b.Penumbral lunar eclipse

The Sun has now been entirely obscured, showing the full splendor of the solar corona. The corona, the Sun's upper atmosphere, which pours out into space above the sun's surface, is visible only during the few minutes of complete solar eclipse.

The Moon is still visible during totality. Sunlight travelling through the Earth's atmosphere gives an orange or reddish hue on the lunar surface. Despite the lack of direct sunshine, the Moon will be visible at totality, glowing orange or reddish.

Learn more about solar eclipse

https://brainly.com/question/1077760

#SPJ4

The ±0.05 cm means that your measurement may be off by as much as 0.05 cm above or below its true value. This value is called the uncertainty or the precision of the instrument.

In physics, uncertainty refers to the degree of doubt or error that is associated with a measurement or calculation. Uncertainty can arise from a variety of factors, such as limitations of measurement equipment, inherent randomness in physical systems, or the limitations of mathematical models.

Uncertainty is an important concept in physics because it is impossible to make perfectly precise measurements or predictions, and understanding the degree of uncertainty associated with a measurement is critical for evaluating the reliability of experimental results and theoretical models. By accounting for uncertainty, physicists can determine the level of confidence that can be placed in a measurement or calculation and make more accurate predictions and decisions.

To learn more about Uncertainty visit here:

brainly.com/question/28998211

#SPJ4

The correct option is c. Covalent compounds have low melting and boiling points due to the large amount of energy required to break the force of attraction.

A covalent compound is a chemical complex that is bound together by covalent bonds. These compounds are made up of two or more atoms of the same or different elements that share electrons. Water ([tex]H_{2} O[/tex]), carbon dioxide ([tex]CO_{2}[/tex]), methane ([tex]CH_{4}[/tex]), and ammonia are examples of covalent molecules ([tex]NH_{3}[/tex]).

Because of the modest Vander Waals force of attraction between molecules, covalent compounds have low melting and boiling points. As a result, just a little amount of energy is required to break the force of attraction and separate the molecules, resulting in a low melting and boiling point.

To know more about covalent compounds, visit

brainly.com/question/30420584

#SPJ4