What would be the effect of decreasing the pressure on this system when it is
in equilibrium?
2H2 +022H₂0
A. The system would remain in equilibrium.
B. H₂ and O₂ would react to produce H₂O more quickly.
C. All of the molecules would react more slowly.
D. H₂O would react to produce H₂ and O₂ more quickly.

What Would Be The Effect Of Decreasing The Pressure On This System When It Isin Equilibrium?2H2 +022H0A.

Answers

Answer 1

The system would remain in equilibrium is the effect of decreasing the pressure on this system when it is in equilibrium. Hence, option A is correct.

According to Le Chatelier's principle, when a system at equilibrium is subjected to a change in temperature, pressure, or concentration, the system will respond in a way that tends to counteract the change and restore equilibrium.

Decreasing the pressure on the system will not affect the position of the equilibrium or the concentrations of the reactants and products.

The system will respond to the decrease in pressure by adjusting the rates of the forward and reverse reactions until a new equilibrium is established.

To learn more about an equilibrium, follow the link:

https://brainly.com/question/30807709

#SPJ1


Related Questions

The highest pressure ever produced in a laboratory setting was about 2.0 x 10 6 atm. If we have a
1.0 x 10 -5 liter sample of a gas at that pressure, then release the pressure until it is equal to 0.275 atm,
what would the new volume of that gas be?

Answers

Answer:

Volume = 72.7272

Explanation:

if only pressure and volume change, then we can do some simple math to find the answer.

2 x 10 ^ 6 times 1 x 10 ^-5 = 20

pressure and volume must equal 20

20 = 0.275 x volume

20 / 0.275 = new volume

I don't remember significant digits but your volume is 72.72727272 just repeated

If we have a 1.0 x 10 -5 liter sample of a gas at that pressure, then release the pressure until it is equal to 0.275 atm, the new volume will be 72.7272

What is Volume?

Volume is the space occupied by a three-dimensional object.

By the Boyle's law

[tex]\rm P_1V_2= P_1V_2[/tex]

P1 (initial pressure) = [tex]2.0 \times10^6 atm[/tex]

V1 (initial volume) = [tex]1.0 \times10^-5 L[/tex]

P2 (final pressure) = 0.275 atm

V2 (final volume) = ? (in L)

Putting the values in the equation

[tex]\rm 2.0 \times10^6 atm \times 1.0 \times10^-5 L = 0.275 atm \times V_2\\\\V_2 = \dfrac{20}{0.275} = 72.72 L[/tex]

Thus, the volume is 72.72 L.

Learn more about  Boyle's law

https://brainly.com/question/1437490

#SPJ2

if youre good at chemistry u better help me now please!

Answers

Answer:

letter B is the answer

Explanation:

just take a look at the atoms

Answer:

B.) Only elements have one kind of atom.

Explanation:

An element consists of only one type of atom, while a compound consists of two or more types of elements

Is it okay if you help me? I'm kind of in a tight spot here. Tysmmmmmmmmmmmmm o(❁´◡`❁)o!!

Answers

Answer:

the answer is true

Explanation:

it's just true

What is the atomic radius
of mercury?

Answers

The answer is 155 pm, hope this helps!

If you know the atomic number and the mass number of an atom of any element, you can determine the atom's composition.

A:True
B:False​

Answers

True. i hope its correct, have a good day. stay happy and stay safe

Answer:

A:true

Explanation:

The number of protons, neutrons, and electrons in an atom can be determined from a set of simple rules.

At what power of ten does the entire solar system come into view

Answers

Answer: 10,000,000,000 kilometers

Explanation:

All the planets in our solar system come into view. But at this distance, only Jupiter and Saturn would be visible with the naked eye.

A chemical ____ is a force of attraction between atoms or
ions that share or transfer valence electrons.

Answers

A chemical bond is a force of attraction between atoms or ions that share or transfer valence electrons.

Which change will cause gravitational force between and a soccer ball to increase?

Answers

Answer:

Moving the balls closer together. The distance decreases and force increases.

what best describe the process of percipitation in the water cycle

Answers

Answer:

Precipitation is water released from clouds in the form of rain, freezing rain, sleet, snow, or hail. It is the primary connection in the water cycle that provides for the delivery of atmospheric water to the Earth. Most precipitation falls as rain.

Explanation:

Which of the following is NOT an atom that hydrogen bonds?

Select one:
a. Oxygen
b. Nitrogen
c. Fluorine
d. Sodium

Answers

Answer:

The answer is D sodium

Explanation:

Which of the following statements is FALSE?
The microscopic size of cells enable them to function properly.
Most organisms on Earth are multi-celled.
Some cells can be shaped like a ball.
Growing children’s cells are constantly dividing.

Answers

Answer:

The answer is functioning properly ok dude?

Explanation:

Answer: "The microscopic size of cells enable them to function properly.

Most organisms on Earth are multi-celled." is false

Explanation:

In unicellular organisms, cell division is the means of reproduction; in multicellular organisms, it is the means of tissue growth and maintenance. Survival of the eukaryotes depends upon interactions between many cell types, and it is essential that a balanced distribution of types be maintained. This is achieved by the highly regulated process of cell proliferation. The growth and division of different cell populations are regulated in different ways, but the basic mechanisms are similar throughout multicellular organisms.


You arrive at English class 45 seconds after leaving math which is 100
meters away. How fast did you travel?

Answers

Answer:

4.97097

Explanation:

You traveled 4.97097 mph.

If we had 79.3 grams of Xe, would we expect a volume that is
greater than or less than that obtained with neon?
a
Greater than
b Equal
с
Less than

Answers

Answer:less than

Explanation:

If we had 79.3 grams of Xe, we would expect a volume that is less than obtained with neon. So, the correct option is (C).

What is Density?

Density is defined as the mass per unit volume of a substance. The most commonly used symbol for density is ρ, although the Latin letter d can also be used. Density is defined as mass divided by volume:

[tex]{\displaystyle \rho ={\frac {m}{V}}}[/tex]

where ρ is density,

m is mass, and

V is volume.

The mass contained per unit volume of an object is known as density. where the SI unit of density is kilogram per cubic meter [tex](kg/m^3).[/tex] Density is inversely proportional to volume, so the density of Xenon is [tex]5.894 kg/m^3[/tex] while the density of neon is 0.89994 kg/m³. So, if density is more than volume will be less and vice versa. In this case, density of Xenon is more as compare to neon so, the volume of neon will be more.

Thus, if we had 79.3 grams of Xe, we would expect a volume that is less than obtained with neon. So, the correct option is (C).

Learn more about Density, here:

https://brainly.com/question/29775886

#SPJ5

constrast a mixture and a compound , how are. they different?​

Answers

Answer:

A mixture is composed of two or more elements or compounds in a non-fixed ratio, which means you can vary the amount of substance in a mixture. A compound is composed of two or more elements in a fixed ratio, so you cannot vary the amount of each element in a compound

Answer:

mixture retains property of combing substances while compound has new properties that are different from combing elements...

can be separated by physical means whereas compounds can be separated by chemical or electrochemical methods

What is Temperature
Choose 1

Answers

Answer:

B. A measure of the average kinetic energy of a substance.

Explanation:

Temperature is a measure of the average kinetic energy of the particles in an object.

Brainlist pls!

Who discovered the nucleus?

Answers

Ernest Rutherford i believe
Ernest Rutherford’s

What property allows objects to be subject to gravity?
friction
mass
inertia
acceleration

Answers

Answer:

Mass

Explanation:

Picture a neutral Satom. This neutral atom will have
valence electrons. To reach a more stable configuration, this atom will
(gain, lose) electrons. The charge of the ion that forms will be
ASAP PLEASEE

Answers

Answer:

it will have 6 valence electrons

it will gain electrons

charge will be 2-

2 NaOH + H2SO4 ------> 2 H2O + Na2SO4
How many moles of H2O can be produced from 12.5 moles of NaOH?

Answers

Explanation:

2moles of NaOH -> 2moles of H2O

so the number of moles r equal.

hence moles of H2O is 12.5

explain what keeps the electrons confined in the space surrounding the nucleus

Answers

Answer:

Electrons are trapped inside the atom because of the attraction forces with positively charged protons that are found in the nucleus.

differences between alkalis, bases and acids? (answer for many points :) )

Answers

Explanation:

protons.

An acid can also be thought of as a chemical that can neutralize a base. Similarly, a base can neutralize an acid.

Acids turn litmus paper red, while bases make litmus paper turn blue.

Some examples of acids are sulfuric acid, hydrochloric acid, nitric acid, and so on. Some examples of bases are sodium hydroxide, potassium hydroxide, and so on.

Acids generally taste sour, while bases have a bitter taste.

Alkalis are the bases that are water-soluble, which means that they dissolve in water. In other words, not all bases are water-soluble, and only the water-soluble bases are known as alkalis. An example of an alkali is sodium hydroxide. It is a base because it can neutralize an acid, and because it is water-soluble, it is an alkali. An example of a base that is not alkali is copper oxide. This chemical can neutralize an acid, but it is insoluble in water.

In other words, all alkali are bases but not all bases are alkalis.

Also, an alkali has a hydroxide group, while a base has an oxide group in it.

How many moles of Al would be produced from 20 moles of Al2O3?
2Al2O3
->
4A1 + 302

Answers

Answer:

[tex]\displaystyle 40 \ mol \ Al[/tex]

General Formulas and Concepts:

Math

Pre-Algebra

Order of Operations: BPEMDAS

Brackets Parenthesis Exponents Multiplication Division Addition Subtraction Left to Right

Chemistry

Stoichiometry

Using Dimensional AnalysisExplanation:

Step 1: Define

[RxN - Balanced] 2Al₂O₃ → 4Al + 3O₂

[Given] 20 mol Al₂O₃

Step 2: Identify Conversions

[RxN] 2 mol Al₂O₃ → 4 mol Al

Step 3: Stoich

[DA] Set up:                                                                                                     [tex]\displaystyle 20 \ mol \ Al_2O_3(\frac{4 \ mol \ Al}{2 \ mol \ Al_2O_3})[/tex][DA] Multiply/Divide [Cancel out units]:                                                         [tex]\displaystyle 40 \ mol \ Al[/tex]

Step 4:Check

Follow sig fig rules and round. We are given 1 sig fig.

Since our final answer already has 1 sig fig, there is no need to round.

The planets in the solar system revolve around the Sun because the Sun is

Answers

Answer: Anyway, the basic reason why the planets revolve around, or orbit, the Sun, is that the gravity of the Sun keeps them in their orbits. ... If the Sun weren't there, the Earth would travel in a straight line. But the gravity of the Sun alters its course, causing it to travel around the Sun, in a shape very near to a circle

Which is a liquid that is used to absorb and release thermal energy?

coolant
lubricant
grease
fuel

Answers

Answer

grese

Explanation:

Any liquid could absorb and release thermal energy. However, a refrigerant or a coolant absorbs heat and releases it to any area faster than any ordinary liquid such as water. So to complete the sentence: A refrigerant/cooler is a liquid that absorbs and releases thermal energy

Answer:

The correct answer is coolant.

Hope it helps. :)

HELLPP!!!
What property allows objects to be subject to gravity?
friction
mass
inertia
acceleration

Answers

Answer: i gotcu the answer is mass

Explanation: The more weight of the object the more its subject to gravity like a feather barley is while a bowling ball smashes into the ground :D

The property allows objects to be subject to gravity is mass. Therefore, option B is correct.

What is mass ?

Mass is a physical body's total amount of matter. Inertia, or the body's resistance to acceleration when a net force is applied, is also measured by this term.

The strength of an object's gravitational attraction to other bodies is also influenced by its mass. The kilogram serves as the SI's fundamental mass unit. The amount of matter object present is also known as mass.

The amount of matter that makes up every item or body is the greatest way to understand mass. Everything that we can see has mass. Examples of objects with mass include a table, a chair, your bed, a football, a glass, and even air. The mass of a thing determines whether it is light or heavy.

Thus, option B is correct.

To learn more about mass follow the link below;

https://brainly.com/question/19694949

#SPJ2

if an element number has a mass number of 244 and an atomic number of 94, how many neutrons does the element have

Answers

94 neutrons
The atomic number and the proton and electron numbers are the same.

HELPPPP!!!!
What property allows objects to be subject to gravity?
friction
mass
inertia
acceleration

Answers

I believe it is mass? Since gravity tells the weight of something. If its wrong I apologize. But consider the rest focus more on speed.

19)
Why are unique atomic spectra produced by different elements?

Answers

When atoms are excited they emit light of certain wavelengths which correspond to different colors. Each element produces a unique set of spectral lines. ... Since no two elements emit the same spectral lines, elements can be identified by their line spectrum.

Why is systems thinking important?
Systems thinking ignores the details of a system and just looks at its overall function.
Systems thinking ranks the parts of a system in terms of most important to least.
Systems thinking allows us to understand all the parts that make up the whole system.
Systems thinking examines how a system affects human life.

Answers

Answer:

Systems thinking allows us to understand all the parts that make up the whole system.

Explanation:

Just took the test

The systems thinking important because, Systems thinking allows us to understand all the parts that make up the whole system. Therefore, option C is correct.

What system thinking ?

By considering the world's complexity in terms of links and entire rather than breaking it down into its component components, systems thinking helps us make sense of how complicated the world is. It has been applied as a method for investigating and producing efficient action in challenging situations.

By using a deeper grasp of the surrounding structure and its constituent parts rather than relying just on previous events, systems thinking gives a technique to more accurately forecast future outcomes.

Systems thinking is a discipline in management that focuses on understanding a system by looking at the connections and interactions between the different parts that make up the entire of that defined system. The concept of the "entire system" is a way of looking at an entire organization in relation to its surroundings.

Thus, option C is correct.

To learn more about system thinking, follow the link;

https://brainly.com/question/17174999

#SPJ2

Mg3N2+3H2O-3MgO+2NH3 If 17 g of magnesium nitride is used, what volume of ammonia gas would be collected at 20°C and 0.989 atm?​

Answers

Explanation:

what are the unit given for the questions

Other Questions
The pattern of bright and dark fringes that appears on a viewing screen after light passes through a single slit is called a(n) _____ pattern.diffractioninterferencetransmissionNone of the above how long will affordable connectivity program last costs that will differ between alternative courses of action and influence the outcome of a decision are called ___sunk costs. relevant costs. unavoidable costs. product costs. Which of these is a recent technology that a business information manager might evaluate and recommend to their boss? OA Al OB. phishing OC. ransomware OD talk boxes A solution that is 0.205 M in CH3NH2 and 0.100 M in CH3NH3Br. Solve an equilibrium problem ( using an ICE table) to calculate the pH of each solution What did the Declaration of Independence do? A. declared freedom for the slaves B. declared equal rights for women C. declared freedom from Great Britain D. declared an end to the war with Great Britain Consider the series 1- 1/2 - 1/3 1/4 1/5 - 1/6-1/7++ come in pairs. Does it converge? Evaluate the indefinite integral as an infinite series. Give the first 3 non-zero terms only. Integral_+... x cos(x^5)dx = integral (+...)dx = C+ Janie bought a bag of lollipops. It contained 25 lollipops and 8 of them were grape flavored. Predict the number of grape lollipops there would be in a bag of 100 lollipops find the volume of the solid generated by revolving the region in the first quadrant bounded by the coordinate axes, the curve , and the line about the line . True/False : riya wrote the option and owns the underlying stock. riya is in a speculative position. can a boolean function f(x,y) be one-to-one? if yes, give an example, if no, give a proof. can 5 vectors in f 4be linearly independent? justify your answer. A coil 4.20 cm in radius, containing 540 turns, is placed in a uniform magnetic field that varies with time according to B=(1.20 10^-2 T/s)+(3.35x10^-5 T/s^4 )t^4. The coil is connected to a 700 12 resistor, and its plane is perpendicular to the magnetic field. You can ignore the resistance of the coil. Find the magnitude of the induced emf in the coil as a function of time. O E = 1.14x10^-2 V +(1.28*10^-4 V/s3 ) t^3O E = 3.59x10^-2 V +(1.00-10^-4 V/s ) t^3O E = 3.59x10^-2 V +4.01-10^-4 V/s3 ) t^3O E = 1.14-10^-2 V +(4.01-10^-4 V/s ) t^3 when we titrate oxalate ions with permanganate ions, why is the iron(iii) ion of our complex not also oxidized? How did the ancient bebers have an effect on ancient berber civilization cheap talk generally affects the game's payoffs. is illegal. can be credible when both firms have an incentive to be truthful. is never credible. What does dynamic programming have in common with divide-and-conquer? what is a principal difference between them? TRUE OR FALSE late in a plant asset's useful life, the amount of depreciation that would be recorded w {a, b, c}* : w has an equal number of a's, b's, and c's