The solution becomes clear, the enzyme is denatured, and the structure of phenolphthalein is changed.
When the reaction buffer is raised to an extremely high pH, the enzyme is denatured, the solution turns clear, and the structure of the phenolphthalein in the reaction tube is altered.
When acidic or basic compounds are added, a substance is said to be a buffer if it can resist the pH change. It may neutralise minor quantities of acid or base, essentially maintaining the solution's pH. For processes and/or reactions that require a certain and constant pH, this is essential.
These tubes provide the optimum environment for small-scale biological response or suspension culture research that need for aseptic conditions with gas exchange.
To know more about buffer
https://brainly.com/question/22821585
#SPJ4
Observe the diagram of the water cycle. Fill in the state changes with each step. Then, in the space provided, explain the change of state that occurs as water moves from one part of the water cycle to another.
According to the forces of attraction , as water passes on in water cycle its state changes from liquid to vapor and solid in form of ice and then back to liquid.
What are forces of attraction?Forces of attraction is a force by which atoms in a molecule combine. it is basically an attractive force in nature. It can act between an ion and an atom as well.It varies for different states of matter that is solids, liquids and gases.
The forces of attraction are maximum in solids as the molecules present in solid are tightly held while it is minimum in gases as the molecules are far apart . The forces of attraction in liquids is intermediate of solids and gases.
The physical properties such as melting point, boiling point, density are all dependent on forces of attraction which exists in the substances.
Learn more about forces of attraction,here:
https://brainly.com/question/23841038
#SPJ1
Complete the electron-pushing mechanism for the reaction by drawing the necessary organic structures and curved arrows for each step. Make sure to include all nonbonding electron pairs.Consider the following reaction: Complete the electron-pushing mechanism for the reaction by drawing the necessary organic structures and curved arrows for each step. Make sure to include all nonbonding electron pairs. Step 1: treatment with NaBH 4 Add curved arrows for the first step. Treat Na + as a spectator ion. Step 2: treatment with D 2 O Add curved arrows for the second step. Do not show Na + counter ion. Final products Draw the products of the last step (hint: one organic and one inorganic species), including all nonbonding electron pairs. Do not show Na + counter ion.
The given reaction involves the reduction of a ketone using NaBH4 and subsequent exchange of a proton with deuterium in D2O.
In the first step, NaBH4 donates a hydride ion (H-) to the carbonyl carbon of the ketone, forming an alkoxide intermediate. The hydride ion acts as a nucleophile, attacking the electrophilic carbon of the carbonyl group. In the second step, the alkoxide intermediate is protonated by D2O, leading to the formation of the corresponding alcohol and release of NaOD. The proton exchange with D2O results in the replacement of a proton by a deuterium atom. The final products are the deuterated alcohol and NaOD. The curved arrows in the mechanism represent the flow of electrons, and it is essential to show all the nonbonding electron pairs involved in each step. The given reaction involves the reduction of a ketone using NaBH4 and subsequent exchange of a proton with deuterium in D2O.
Learn more about ketone :
https://brainly.com/question/4439718
#SPJ4
Part A Identity the reactants and products in this chemical equation Drag the appropriate labels to their respective targets. Reset Help reactant 4 NH3(g) + 5 O2(g) 4 NO(g) + 6 H2O(8) product
In the reaction: 4 NH₃ + 5 O₂ → 4 NO + 6 H₂O, the reactants are NH₃ and O₂ and the products are NO and H₂O.
The balanced chemical reaction is given as,
4 NH₃ + 5 O₂ → 4 NO + 6 H₂O
The substance present in the left of the arrow in a chemical equation are called reactants. Basically, a reactant is a substance that is present at the start of a chemical reaction. The substance(s) present in the right of the arrow are called products. Basically, a product is defined as a substance that is present at the end of a chemical reaction.
Learn more about chemical reaction from the link given below.
https://brainly.com/question/29039149
#SPJ4
A compound, C6H14, produces a 1H NMR spectrum with four dustinct signals. The steps made by the integral trace measure 21, 42, 28 and 7 mm. Complete the table below to show the number of protons associated with each signal. Integral Protons21 mm, 42 mm, 28 mm, 7 mm
Integral: Protons:
21 mm 1 proton
42 mm 2 protons
28 mm 2 protons
7 mm 3 protons
To determine the number of protons associated with each signal, we need to look at the relative areas under each peak in the NMR spectrum, which are represented by the integral trace. The integral trace values of 21, 42, 28, and 7 mm represent the relative areas under each of the four distinct signals in the NMR spectrum.
The general rule is that the area under a peak in an NMR spectrum is proportional to the number of protons giving rise to that signal. Therefore, we can assign the number of protons associated with each signal by comparing the relative sizes of the integrals.
In this case, the largest integral corresponds to the signal with 2 protons (42 mm), so we can assign 2 protons to that signal. We can then assign the number of protons associated with the other signals by using the ratio of the integrals. For example, the integral of 21 mm is roughly half the size of the 42 mm integral, so we can assign 1 proton to the signal with an integral of 21 mm.
Using this method, we can assign the number of protons associated with each signal as shown in the table above.
Learn more about proton signal here: https://brainly.com/question/29769211
#SPJ1
What is the molecular formula for a compound that is 92.24% carbon and 7.76% hydrogen and has a molar mass of 78.12g?
The empirical formula of a compound gives the whole number ratio of atoms of various elements. The molecular formula of the compound is C₆H₆.
What is Molecular formula?The molecular formula of a compound is defined as the formula which gives the actual number of atoms of various elements present in one molecule of the compound.
Here 92.24 % 'C' = 92.24 g
7.76 % 'H' = 7.76 g
Number of moles (n) = Given mass / Molar mass
'n' of 'C' = 92.24 / 12 = 7.68 moles
'n' of 'H' = 7.76 / 1 = 7.76 g
Number of atoms of 'C' = 7.68 / 7.68 = 1
Number of atoms of 'H' = 7.76 / 7.68 = 1
So empirical formula is CH.
The molecular weight of CH = 13
Number of atoms of each element = 78.12 / 13 = 6
Thus the molecular formula is C₆H₆.
To know more about molecular formula, visit;
https://brainly.com/question/28647690
#SPJ1
michael is being discharged home with his parents. the parents are concerned about recurrent infection with rsv and ask what can be done to lessen the chance of a reinfection.
By limiting contact and doing routine sanitization, RSV infection can be avoided.
What is RSV infection?Respiratory syncytial virus, also called human respiratory syncytial virus and human orthopneumovirus, is a common and contagious virus that causes infections of the respiratory system. It is a negative-sense RNA, single-stranded virus. Although the majority of people recover within a week or two, RSV can be devastating, especially for young children and the elderly. RSV is the most common cause of pneumonia (lung infection) and bronchiolitis (inflammation of the small airways of the lung) in infants under one in the United States.
To learn more about here Infection, click the link below
brainly.com/question/29850356
#SPJ4
sodium has 11 electrons arranged in three energy levels. the outer level has only one electron. in order to become stable, the atom loses an electron thus exposing the previous level with 8 electrons and subsequently becomes an ion with
The atom loses an electron in order to reach a stable state, revealing the level with 8 electrons previously, and transforms into an ion with one positive charge.
How can you determine an atom's ground state?When all of the electrons in an atom are at their lowest energy levels, this is known as the ground state. The energy level with the least energy out of the four that are visible is level K.
What is sodium's energy in its ground state?The electron configuration in sodium's ground state is 1s22s22p63s1. The primary quantum number (n), the orbital (s, p, d, or f), and the total number of electrons are used to represent electron configurations. The total number of electrons is expressed as a superscript.
To learn more about electronic configuration of sodium visit:
brainly.com/question/19589767
#SPJ1
Alcoholic beverages are a mixture of water, ethanol, and natural flavoring. Describe why placing an alcoholic beverage in a freezer will not result in a solid, frozen product. (For context, we just finished talking about colligative properties and freezing point depression. :))
Placing an alcoholic beverage in a freezer will not result in a solid, frozen product because the freezing point of ethanol is very low.
Alcoholic beverages are defined as any fermented liquor, such as wine, beer, or distilled spirits, that contains ethyl alcohol, or ethanol (CH₃CH₂OH), as an intoxicating agent.
When we place alcohol in a freezer it often does not get frozen. This happens because we can't get it cold enough. Generally the freezing point of ethanol (the main component of alcohol) is -114 C or (-173 F). And our home freezer probably doesn't go below -20 F at its best.
Learn more about ethanol from the link given below.
https://brainly.com/question/28487809
#SPJ4
order the following steps of the chymotrypsin mechanism. not all steps may be given. top label: deprotonation of ser by hisdeprotonation of ser by his
I assume that the prompt got cut off. Based on the given information, the correct order of the steps of the chymotrypsin mechanism is:
Deprotonation of Serine (Ser) by Histidine (His).Attack of the peptide bond by the deprotonated Serine hydroxyl group.Formation of a tetrahedral intermediate.Collapse of the tetrahedral intermediate and cleavage of the peptide bond.Release of the first product and formation of an acyl-enzyme intermediate.Note: The prompt seems to be asking for two labels, but only one label is given. Therefore, I provided the answer assuming that the label provided refers to the first step of the chymotrypsin mechanism.
For more questions like Chymotrypsin mechanism visit the link below:
https://brainly.com/question/11477380
#SPJ4
Which of the following salts would give you the highest concentration of phosphate ions in solution if you placed 1 mole of the salt in a liter of water?
Select one:
a. Ba³(PO⁴)²K³p =1.3 x 10–²⁹
b. Pb³(PO⁴)² K³p= 3.0 x 10–⁴⁴
c. Ca³(PO⁴)² K³p = 1.0 x 10–²⁵
d. Sr³ (PO⁴)² K³p = 1.0 x10—³¹
The salt that would give you the highest concentration of phosphate ions in solution if you placed 1 mole of the salt in a litre of water is the one with the highest Kₛp value. i.e. option B
The Kₛp value indicates the solubility product constant, which is a measure of the solubility of a salt in water.
The higher the Kₛp value, the more soluble the salt is in water, and therefore the higher the concentration of ions in solution.
Out of the given options, the salt with the highest Kₛp value is Pb³(PO⁴)² with a Kₛp value of 3.0 x 10–⁴⁴.
Therefore, this salt would give you the highest concentration of phosphate ions in solution if you placed 1 mole of the salt in a litre of water.
Therefore the correct option is (b.) Pb³(PO⁴)² K³p= 3.0 x 10–⁴⁴
To know more about Kₛp values, refer here:
https://brainly.com/question/12961072#
#SPJ11
what is the multiplicity of the indicated carbon in an off resonance decoupled c 13 nmr spectrum in off resonance decoupled spectra, direct 13 ch coupling is observed
There will be two results observed by 13C-NMR spectrum- First at 31 ppm signal is for the more shielded and electron-rich carbon atoms and is upfield. And second at 70 ppm signal is directed downfield and pertains to the carbon atom, which is more exposed and has an environment poor in electrons.
What is 13C- NMR?
The use of nuclear magnetic resonance (NMR) spectroscopy on carbon is known as carbon-13 (C13) nuclear magnetic resonance, often known as carbon-13 NMR spectroscopy or 13C NMR spectroscopy, or simply as carbon NMR.
Similar to proton NMR (1 H NMR), it enables the identification of carbon atoms in an organic molecule in the same way that proton NMR identifies hydrogen atoms. The only isotope that 13C NMR can detect is 13 C. The predominant carbon isotope, 12 C, is not found.
Therefore 13C NMR spectroscopy is widely used for characterizing organic and organometallic compounds.
To learn more from 13C- NMR from the given link
https://brainly.com/question/28260199
#SPJ4
4. If you were to place the skater at the 5-meter mark, how high would the skater go on the other side of the track? Write your prediction, then try it and state whether it matched your prediction or not and, if not, what happened instead.
If the skater starts at the 5-meter mark, I predict that the skater will reach the same height on the other side of the track. This is because the parabolic shape of the skater's trajectory is symmetrical, meaning that if the skater reaches a certain height at one point, they will reach the same height at the same distance on the opposite side.
This prediction can be tested by drawing a parabolic shape to represent the skater's trajectory and finding the height at the 5-meter mark and the 5-meter mark on the other side of the track.
you would expect human red cells to shrink in which of the following solutions: 0.2m nacl 0.2m surcrose 0.2m urea
You would expect human red cells to shrink in 0.2 M NaCl. The correct answer is A.
Red blood cells have an ion concentration of roughly 300mM, or 300 milliosmolality. Essentially, it indicates that the concentration of all the dissolved ions in a red blood cell is roughly 300 mM, or 0.3M.
Where there is a higher concentration of water, it moves toward a lower concentration. Water flows from lower osmolarity to higher osmolarity, or put another way (since water is higher in concentration in a lower osmolarity solution).
Since a solution of 0.2M NaCl has an osmolarity of 0.4M, the water concentration in red blood cells is higher. This implies that the red blood cell will shrink and shrivel when water flows OUT of it.
Urea 0.2M is a dissolved solute even though it is not ionic. Water will somewhat enter the red blood cell since it is less concentrated than the red blood cell. (assumes red blood cells with 0.3M osmolarity).
In a hypotonic condition, a red blood cell will enlarge and go through hemolysis (burst). A red blood cell will crenate and lose water when it is placed in a hypertonic solution (shrivel). Animal cells typically function best in an isotonic environment, in which the rate of water flow into and out of the cell is equal.
Learn more about red cell at https://brainly.com/question/22018705
#SPJ4
There are two stable isotopes of chlorine: chlorine -35 and chlorine-37. Given that the average atomic mass of a chlorine atom is 35.45 amu, which if the following statements is true? A. chlorine contains almost exclusively Cl-37 with very little Cl-35 B. Chlorine contains more Cl-35 than Cl-37 C. Chlorine contains roughly equal amounts of Cl-35 and Cl-37 D. Chlorine contains more Cl-37 than Cl-35
Given that the average atomic mass of a chlorine atom is 35.45 amu, then the true statement would be that Chlorine contains roughly equal amounts of Cl-35 and Cl-37. The correct answer is C.
The average atomic mass of an element is the weighted average of the masses of its naturally occurring isotopes. In the case of chlorine, the atomic mass of the two stable isotopes (chlorine-35 and chlorine-37) is close to each other.
Chlorine-35 has an atomic mass of 34.97 amu and makes up about 75% of naturally occurring chlorine atoms, while chlorine-37 has an atomic mass of 36.97 amu and makes up about 25% of naturally occurring chlorine atoms.
The average atomic mass of chlorine can be calculated using the following formula:
average atomic mass = (fractional abundance of isotope 1 x mass of isotope 1) + (fractional abundance of isotope 2 x mass of isotope 2)
average atomic mass = (0.75 x 34.97 amu) + (0.25 x 36.97 amu)
average atomic mass = 26.23 amu + 9.24 amu
average atomic mass = 35.47 amu
This is very close to the reported average atomic mass of chlorine (35.45 amu), which confirms that chlorine contains roughly equal amounts of Cl-35 and Cl-37.
To learn more about atomic mass unit (amu) visit: https://brainly.com/question/29793336
#SPJ4
If the mass of the solid increases or decreases, then the volume will increase or decrease
We can say that the volume of the object is directly proportional to its mass. As the volume increases the mass of the object increases in direct proportion.
The ratio mol of soluteL of solution is called the _____ of a solution (symbol M), whereas the _____ (symbol m) of the solution is expressed as mol of solutekg of solvent. For an aqueous solution, these two quantities will be very similar if the solution concentration is _____.
molarity; molality; low
The molarity of a solution (symbol M) is the ratio of mol of solute to kg of solvent in the solution, whereas the molality (symbol m) is the ratio of mol of solute to kg of solvent in the solution.
What does molarity M mean?The quantity of a material in a specific volume of solution is known as its molarity (M). The number of moles of a solute per liter of a solution is known as molarity. The molar concentration of a solution is another name for molarity.
What does molarity mean simply?A solution's concentration can be determined by measuring its molarity. It is employed to figure out how much solute or solvent is present. The number of moles of a solute is used to calculate the molarity, or concentration, of a solution or other material in solution.
To know more about molarity visit:
https://brainly.com/question/13889022
#SPJ4
what is the name for the ion element Na+
iron(III) chromate lithlumn nitrate
iron(III) nitrate + lithium chromate
The reaction you have written is a chemical equation for a precipitation reaction between iron(III) nitrate and lithium chromate, which results in the formation of iron(III) chromate and lithium nitrate. Precipitation reactions occur when two solutions are mixed and a solid product is formed, which typically settles at the bottom of the container. The equation is balanced, meaning that the number of atoms of each element is equal on both sides of the arrow. This is an important aspect of chemical reactions, as the law of conservation of mass states that matter cannot be created or destroyed in a chemical reaction.
how do you balance a chemical reaction?
A designated driver is one who, in a group of two or more people that will be drinking, agrees to drink only one or two alcoholic beverages and then drive the others home safely.
True or False?
The given statement is false.
What is alcoholic beverages ?
Any fermented beverage that contains the intoxicating ingredient ethanol (CH3CH2OH), such as wine, beer, or distilled spirits, is considered to be an alcoholic beverage. The discussion on alcoholic beverages is brief.
What is drive ?
Driving refers to controlling or riding in a motor vehicle. Drive a go-kart, a bus, or a car. Drive is one of those multipurpose words with several applications. In a broad sense, it has to do with pushing or pushing in a certain direction; drive and go go hand in hand.
Therefore, given statement is false.
Learn more about alcoholic beverages from the given link.
https://brainly.com/question/29791214
#SPJ1
calculate the ph of 500 ml of water to which 15 ml of 1.0 m koh has been added. give your answer to 1 decimal point.
The pH of 500 ml of water to which 15 ml of 1.0 M KOH has been added is 12.4.
The volume of the water = 500 mL
The volume of the KOH = 15 mL
The total volume = 500 + 15
= 515 mL
= 0.515 L
The moles of the KOH = molarity × volume in L
The moles of the KOH = 1 × 0.015
= 0.015 mol
The molarity = 0.015 / 0.515
Molarity = 0.029 M
The KOH dissociates is completely, the added [OH] is equal to the [KOH]
pOH = - log ( 0.029 + 10⁻⁷ )
The Hydroxide ion concentration in the water is 1.0 x 10-7M, is ignored because it is much smaller .
pOH = - log (0.029)
pOH = 1.52
pH = 14 - pOH
pH = 14 - 1.52
pH = 12.4
To learn more about pH here
https://brainly.com/question/29461558
#SPJ4
According to this week's lecture materials, scientists estimate that sea levels will rise between approximately 1 and 5 meters. There are many factors that contribute to this global change. Which of the following choices is NOT one of them?
-Melting glaciers
-None of the other choices are correct.
-Man-made CO2 emissions
-The release of methane and carbon dioxide stored in the earth's biosphere
None of the other choices are correct. Because all the other choices are the factors which contribute to the sea level rise.
What are the major contributors to sea level rises?Sea level rise is caused mainly by two factors linked to global warming, those are: the added water from the melting ice sheets and the glaciers, and the expansion of seawater as it is getting warm. The ice melting from land into the ocean, warming waters which expand, the slowing Gulf Stream, and the sinking land are all contribute to sea level rise.
How do the scientists determine if sea levels are rising?Sea level is mainly measured by using the tide stations and the satellite laser altimeters. Tide stations around the world tell us what is occurring at a local level, that is the height of the water as measured along the coast relative to a specific point on land.
Learn more about sea level rises at: https://brainly.com/question/14827965
#SPJ4
For each of the following compounds, predict the energy barrier to rotation (looking down any one of the C—C bonds). Draw a Newman projection and then compare the staggered and eclipsed conformations. Remember that we assigned 4 kJ/mol to each pair of eclipsing H’s and 6 kJ/mol to an H eclipsing a methyl group:
(a) 2,2-Dimethylpropane
(b) 2-Methylpropane
(a) The steric hindrance brought on by the large methyl groups in 2,2-dimethylpropane results in a rather high energy barrier to rotation.
The lowest amount of energy necessary for a chemical reaction to take place is referred to as the energy barrier, also known as the activation energy. It is the amount of energy needed for the reactants to reach the transition state or the reaction's maximum energy location. The size of the energy barrier controls how quickly a reaction happens; a higher barrier causes a slower rate of reaction. Catalysts are frequently utilised to offer an alternate pathway that takes less energy to move forward in order to lower the energy barrier. Grasp chemical kinetics and creating chemical reactions with appropriate reaction rates require an understanding of the energy barrier concept.
Learn more about energy barrier here:
https://brainly.com/question/18880410
#SPJ4
Which of the following contains the MOST atoms? You shouldn't need to do a calculation here.
O 10.0 g Mg
O 10.0 g Ne
O 10.0 g Kr
O 10.0 g Ar
O 10.0 g He
The substance with the most atoms is He (10.0 g), since it has the lowest molar mass (4.00 g/mol).
What is Atom?
An atom is the basic unit of matter that is composed of three types of subatomic particles: protons, neutrons, and electrons. Atoms are incredibly small and are the building blocks of all matter in the universe.
The nucleus of an atom is made up of positively charged protons and neutral neutrons. The number of protons in an atom's nucleus determines its atomic number, which defines its unique chemical identity. The electrons, which are negatively charged, orbit the nucleus in shells and interact with other atoms to form chemical bonds.
The number of atoms in a substance is determined by its molar mass, which is the mass of one mole of the substance in grams. One mole of any substance contains Avogadro's number of atoms, which is approximately 6.022 x 10^23.
The molar masses of the given substances are:
Mg: 24.31 g/mol
Ne: 20.18 g/mol
Kr: 83.80 g/mol
Ar: 39.95 g/mol
He: 4.00 g/mol
Since the amount of each substance is the same (10.0 g), we can compare the number of atoms by comparing their molar masses. The substance with the lowest molar mass will contain the most atoms, since the same mass of that substance corresponds to a greater number of moles.
Therefore, the substance with the most atoms is He (10.0 g), since it has the lowest molar mass (4.00 g/mol).
Learn more about Atom from given link
https://brainly.com/question/17545314
#SPJ4
If the equilibrium constant for the reaction is greater than 1.0, and equal amounts of Q and Rare mixed together, then the reaction will proceed to generate more ___. If the equilibrium constant for the reaction is between 0 and 1, and equal amounts of Q and Rare mixed together, then the reaction will proceed to generate more ___If Keq = 4, and the starting concentrations of Q and Rare both 1.4 uM, then the equilibrium concentration of Q is ____ uM and the equilibrium concentration of R is ____uM
The concentration of R at Equilibrium is 2.24 microMolar and the concentration of Q at Equilibrium is 0.56 microMolar.
What is Equilibrium constant ?
The equilibrium constant (K) is a measure of the extent to which a chemical reaction has proceeded towards equilibrium, and is defined as the ratio of the concentrations of products to the concentrations of reactants at equilibrium, with each concentration raised to the power of its stoichiometric coefficient. In other words, for a chemical reaction of the form:
aA + bB ⇌ cC + dD
The equilibrium constant is given by:
K = [C]^c [D]^d / [A]^a [B]^b
Where [X] represents the concentration of species X, and a, b, c, and d are the stoichiometric coefficients of species A, B, C, and D, respectively. The equilibrium constant is a dimensionless quantity, and its value depends only on the temperature and pressure at which the reaction is taking place. A larger value of K indicates that the reaction has proceeded further towards the product side at equilibrium.
K = R/Q
4=1.4+x/1.4-x
Therefore, x =0.84
To learn more about the Equilibrium constant, click the given link ;
https://brainly.com/question/26487468
#SPJ4
The process of photosynthesis produces which of the following? HELP
oxygen
carbon dioxide
energy
glucose
Answer:
Explanation:
glucose and oxygen
Which of the following statements regarding a correlation coefficient of 0.60 for two variables Y and X is most accurate? This correlation:
A) is significantly different from zero.
B) indicates a positive causal relation between the two variables.
C) indicates a positive covariance between the two variables.
The most accurate statement regarding a correlation coefficient of 0.60 for two variables Y and X is significantly different from zero. Option A is the correct answer.
A correlation coefficienb of 0.60 indicates a moderate positive relationship between the two variables, which is significantly different from zero. This means that there is a statistically significant association between the two variables, but it does not necessarily indicate a causal relationship or the direction of the relationship between the two variables.
Additionally, the correlation coefficient measures the strength and direction of a linear relationship between two variables, and does not capture non-linear relationships or other types of associations between the variables.
To know more about the correlation coefficient, here
brainly.com/question/15577278
#SPJ4
Which of these would be considered a basic nucleophile for reaction with an epoxide? (Select all that apply) O HBr O H20, H2SO4 O LiAlH4 O RMgBr O HCN D O CH3ONa, CH3OH O NaOH, H20O HCI O CH3OH, H2SO4 O KCN, DMF O CH3CC- (alkynyl anion)
The following nucleophiles would be considered basic for reaction with an epoxide: NaOH, H2O, CH3ONa, CH3OH, LiAlH4, RMgBr and CH3CC- (alkynyl anion).
Which are more reactive- acidic or basic nucleophiles?Basic nucleophiles are typically more reactive towards epoxides than acidic nucleophiles due to their electron-rich nature, which allows them to attack the highly electrophilic carbon centre of the epoxide ring. Acidic nucleophiles are species that can donate electrons to form a new bond with an electron-deficient center, such as a carbocation or an electrophilic carbon atom.
What do these basic nucleophiles do?These nucleophiles can attack the carbon centre of the epoxide and open the ring to form a new alkoxide or alkyne product, depending on the specific conditions and reagents used.
To learn more about nucleophiles, visit here:
https://brainly.com/question/28325919
#SPJ1
A liquid has a PH of1 what type of liquid is it?
Answer:
A liquid with a pH of 1 is a very acidic liquid. It has a high concentration of hydrogen ions (H+) and a low concentration of hydroxide ions (OH-). Examples of such liquids include hydrochloric acid (HCl) and battery acid. It is important to handle such liquids with caution as they can be corrosive and harmful to human health.
What is the total number of atoms in the following formula? CaBr₂ 4 3 1 2
Answer:
3 atoms
Explanation:
There is one calcium atom (Ca) and two Bromine atoms (Br2)