1 mole of C are formed upon complete reaction of 2 mol of B according to the generic chemical reaction.
What is moles?In the International System of Units, the mole (sign mol) is the unit of material quantity (SI). The amount of material is a measurement that indicates how many elementary constituents of a certain substance are present inside of an object or sample.
The mole has been defined as having 6.022×10²³ basic entities. An elementary entity can be an atom, chemical molecule, an ion, and ion pair, or perhaps a subatomic particle like an electron, depending on the substance.
A + 2B → C
moles of B = 2
the mole ratio between C and B is 1:2
moles of C= 1 mole
Therefore, 1 mole of C are formed upon complete reaction of 2 mol of B according to the generic chemical reaction.
To learn more about moles, here:
https://brainly.com/question/15209553
#SPJ6
mono addition of hbr to conjugated dienes leads to multiple products, and a given addition product can arise from more than one conjugated diene. two allylic bromide products can be synthesized from a diene. from the list given, identify the pair of dienes wherein each diene can serve as a precursor for both of the addition products. note that not all possible products are shown. a diene reacts with h b r to form two monoaddition products. product 1 is a 6 carbon chain with a double bond between carbons 2 and 3, an ethyl substituent on carbon 4 and a bromine on carbon 4. product 2 is a 6 carbon chain with an alkene between carbons 3 and 4, a bromine substituent on carbon 2 and an ethyl substituent on carbon 4. identify the diene precursors.
The conjugated diene creates a mixture of two products the kinetic product and the thermodynamic product upon electrophilic addition; the ratio of these two products is governed by the reaction's circumstances.
What is bromide product?"When life delivers you lemons, make lemonade," is an example of a common proverb or saying that is obvious and not all that helpful. Follow your aspirations and "Love requires hard effort" are two common phrases that some people love to use. Such hackneyed, overused phrases are bromides.A type of drug called bromide is used to treat severe epilepsy, which is known to cause myoclonic seizures in particular.In fresh water, bromide concentrations typically vary from trace levels to 0.5 mg/l. Bromide concentrations in desalinated water can get close to 1 mg/l.Rapid inhalation Upper respiratory symptoms, a cough, a headache, affects on the central nervous system (CNS), and lacrimation may result from exposure to bromine vapour. The CNS is affected by acute oral bromine exposure. Acute cutaneous exposure to bromine has been linked to deep partial skin loss and skin discoloration.To learn more about bromide product, refer to:
https://brainly.com/question/28997330
#SPJ4
mpang CUNGS
Sofia has two solid cubes made of the same mate-
rial. One cube is very large, and the other cube is
very small. Put an X next to all the statements you
think are true about the two cubes.
A The larger cube has more mass
than the smaller cube.
The larger cube has less mass than the
smaller cube.
c The larger cube melts at a higher temperature than the smaller cube.
The larger cube melts at a lower temperature than the smaller cube.
The density of the larger cube is greater than the smaller cube.
The density of the larger cube is less than the smaller cube.
The larger cube is more likely to float in water than the smaller cube.
H The larger cube is more likely to sink in water than the smaller cube.
The larger cube is made up of larger atoms than the smaller cube.
The larger cube is made up of smaller atoms than the smaller cube.
Explain your thinking, Describe the "rule" or reasoning you used to compare the
cubes.
The “rule” or reasoning that I used to compare the cubes is the equation between density, mass, and volume.
What is density?Density can be defined as mass per unit volume. It is usually expressed in kilograms per cubic meter or grams per cubic centimeter. The formula for density is:
Density = Mass ÷ Volume
where Mass is the total amount of matter in an object, and Volume is the amount of space that the object takes up.
A. The larger cube has more mass than the smaller cube. Х
B. The larger cube has less mass than the smaller cube. Х
C. The larger cube melts at a higher temperature than the smaller cube. Х
D. The larger cube melts at a lower temperature than the smaller cube. X
E. The density of the larger cube is greater than the smaller cube. X
F. The density of the larger cube is less than the smaller cube. X
G. The larger cube is more likely to float in water than the smaller cube.
H. The larger cube is more likely to sink in water than the smaller cube.
I. The larger cube is made up of larger atoms than the smaller cube.
J. The larger cube is made up of smaller atoms than the smaller cube.
Hence, the true statements are marked above.
For more details regarding the density, visit:
https://brainly.com/question/13434141
#SPJ9
based on what you know of glycosidic bond-forming reactions in nature, propose a reasonable mechanism for the linking of the two monosaccharides, starting with the activated hemiacetal species, assuming that it is a udp species as in the cellulose glycosidic bond-forming reaction
In nature, the linking of two monosaccharides through a glycosidic bond involves the formation of an intermediate hemiacetal species. The activated hemiacetal species in this case is UDP, and it is used to form the glycosidic bond in cellulose.
The first step in the reaction is the activation of the UDP molecule by phosphorylation, which leads to the formation of UDP-glucose. The UDP-glucose then reacts with the hydroxyl group on the C4 carbon of another glucose molecule to form a glycosidic bond. This reaction is catalyzed by the enzyme cellulose synthase, which binds the glucose molecules and orients them in a way that facilitates the formation of the glycosidic bond. The result is the formation of a long chain of glucose molecules joined by glycosidic bonds, which constitutes the cellulose polymer.
Find out more about cellulose polymer.
brainly.com/question/29825002
#SPJ4
How many grams is 5.89 moles of cobalt
347.12 gram present in 5.89 moles of cobalt.1 mole is equal to 6.023 × 10²³ particles.
What do you mean by the term mole ?The term mole is defined as the amount of material containing 6.023 × 10²³ particles.
1 mole is equal to 6.023 × 10²³ particles.
It can be utilized to measure out the products obtained from the chemical reaction. The unit is referred by mol. The formula for the number of moles formula is showed as follows.
Number of Moles = Mass of substance ÷ Mass of one mole.
The amount of atoms, molecules, or other particles 6.023 × 10²³ that make up one mole of a material is known as Avogadro's Number. One mole of hydrogen, for instance, is represented by hydrogen atoms. One mole of water is equal to 6.023 × 10²³ water molecules.
1 mole of cobalt = 58.9345 grams
Therefore, 5.89 moles of cobalt = 5.89 × 58.9345
= 347.12 gram
Thus, 5.89 moles of cobalt contains 347.12 gram.
To learn more about the mole, follow the link;
https://brainly.com/question/26416088
#SPJ9
When balanced with smallest set of whole numbers, the coefficient of O2 in the following equation is
__ C3H5OH+ __ O2 --> __ CO2 + __ H2O
the coefficient of O2 in the following equation is 3, 6, 3, 6
What is coefficient?In chemistry, a coefficient is a number that is placed in front of a chemical formula when writing a chemical equation. It indicates the number of molecules or moles of a particular substance that is present in the reaction. For example, if the coefficient for oxygen is two, then two molecules of oxygen are present for every one molecule of the reactant. Coefficients are used to balance chemical equations and can often be used to determine the amount of products produced in a reaction. For example, if two molecules of hydrogen react with two molecules of oxygen to form one molecule of water, then the coefficients in the equation would be 2H2 + 2O2 --> 2H2O.
Therefore, the coefficient of O2 in the following equation is 3, 6, 3, 6
To learn more about coefficient visit
brainly.com/question/19727079
#SPJ4
Based on their positions in the periodic table, predict which has the largest first ionization energy: Mg, Ba, B, O, Te.answer choicesMgBaBOTe
Boron has the largest first ionization energy. Option C is correct.
The first ionization energy generally increases from left to right across a period of the periodic table, and decreases from top to bottom down a group. Therefore, in the given options, the element with the largest first ionization energy would be boron (B), as it is the closest to the right-hand side of the period and has a relatively small atomic radius compared to the other options.
The order of the elements from smallest to largest first ionization energy would be:
B < O < Mg < Ba < Te
Note that there may be some exceptions to this general trend due to other factors, such as electron configuration and shielding effects, but this is the overall trend.
To know more about ionization energy here
https://brainly.com/question/28385102
#SPJ4
--The given question is incorrect, the correct question is
"Based on their positions in the periodic table, predict which has the largest first ionization energy: Options A) Mg B) Ba C) B D) O E) Te."--
An experiment is conducted in order to determine the mass of silver metal in an alloy. The alloy is dissolved in acid to convert all the silver metal to silver ions, and those ions are then precipitated by reaction with excess sodium chloride. The precipitate is washed, dried and weighed, and the following data are collected. Mass of silver alloy = 4.3148 g Mass of filter paper = 0.50000 g Mass of filter paper and dried precipitate 1.9332 g What is the percent by mass of silver in the alloy? a. 0.010000 % b. 1.0787 % c. 25.000 % d. 100.00 %
When the precipitate is washed, dried and weighed, then the percent by mass of silver in the alloy is 100%.
First, we need to determine the mass of the silver in the precipitate. We can do this by subtracting the mass of the filter paper from the mass of the filter paper and dried precipitate:
mass of precipitate = (mass of filter paper and dried precipitate) - (mass of filter paper)
mass of precipitate = 1.9332 g - 0.50000 g = 1.4332 g
Since all the silver in the alloy was converted to silver ions and then precipitated as silver chloride, the mass of silver in the precipitate is equal to the mass of silver in the original alloy. Therefore, the percent by mass of silver in the alloy is:
percent by mass of silver = (mass of silver / mass of alloy) x 100%
We just need to solve for the mass of silver. We know that the mass of the alloy was 4.3148 g, so the mass of silver must be:
mass of silver = mass of alloy - mass of other elements
Since we're assuming the alloy is pure silver and other elements, we can simply subtract the mass of the other elements from the mass of the alloy to get the mass of silver. We don't have information about the mass of other elements, but we can assume it's small enough to be negligible.
So, we have:
mass of silver = 4.3148 g - 0 g (assumed negligible) = 4.3148 g
Now we can calculate the percent by mass of silver:
percent by mass of silver = (mass of silver / mass of alloy) x 100%
percent by mass of silver = (4.3148 g / 4.3148 g) x 100%
percent by mass of silver = 100.00%
To know more about alloy here
https://brainly.com/question/16935193
#SPJ4
Classify each of the following as either macroscopic, microscopic or particulate:a snow ballmacroscopic
a. a red blood cell is microscopic;b.a snow ball is macroscopic;c. baking powder Particulate
a. Microscopic - A red blood cell is too small to be seen with the blind eye and must be observed under a microscope.
b. Macroscopic - A snowball is large enough to be seen with the blind eye
c. Particulate - Baking powder is a fine powder made up of microscopic particles.Macroscopic refers to anything that can be seen with the blind eye . Microscopic refers to anything that requires a microscope to be seen. Particulate refers to materials that are made up of tiny particles or molecules, such as dust, smoke, and gas.
learn more about Macroscopic Refer:brainly.com/question/26101594
#SPJ4
complete question:Classify each of the following as either macroscopic, microscopic or particulate:
a. a red blood cell.
b.a snow ball
c. baking powder.
which of the following graphs represents the magnitude of the electric field as a function of the distance from the center of a solid charged conducting sphere of radius r?
The correct graph that represents the magnitude of the electric field as a function of the distance from the center of a solid charged conducting sphere of radius r is a graph that shows a linear relationship between the electric field (E) and the distance (r) from the center of the sphere.
The electric field is proportional to the inverse square of the distance from the center of the sphere, so the graph should show a decrease in magnitude as the distance from the center of the sphere increases.
The slope of the graph should also be steeper closer to the center of the sphere and gradually become less steep as the distance from the center increases. Therefore, the correct graph is a straight line that starts with a relatively steep slope and gradually becomes less steep as the distance from the center increases.
For more questions like Sphere of radius visit the link below:
https://brainly.com/question/27857644
#SPJ4
The concentration of ionic substances is important
for the heart to beat. Your heart responds to
electrical impulses that travel through heart cells
that are made up mostly of water. Which
properties of ionic compounds are important to
support this function?
Solubility in water
Conductivity
Crystalline
Melting point
Answer:
Solubility in water and Conductivity
Explanation:
Ionic compounds are important for the heart to beat because they are soluble in water and conduct electricity. This allows the electrical impulses that regulate heartbeats to easily travel through the heart cells, which are mostly composed of water. Solubility in water allows the ionic substances to be easily dispersed in the heart cells, while conductivity allows the electrical impulses to move quickly and efficiently through the cells. The crystalline structure and melting point of ionic compounds are not as relevant for this function.
calculate the final volume of a solution prepared by diluting of lithium carbonate with water. round your answer to significant figures.
Lithium carbonate is a solid compound that does not dissolve in water. Therefore, the final volume of the solution will not be affected by the dilution of lithium carbonate with water.
What is solid compound?A solid compound is a type of chemical compound that consists of two or more elements combined together in a solid state. Solid compounds are the most abundant type of compounds in nature, and are typically composed of two or more elements held together by strong chemical bonds. Examples of solid compounds include table salt (NaCl), sugar (C12H22O11), and stainless steel (Fe-Cr-Ni). Solid compounds are generally very stable, and can be found in both organic and inorganic forms. They can also be formed from other compounds, such as when two liquids mix together. Solid compounds are often used in industrial settings, such as in the production of pharmaceuticals, dyes, and other materials.
To learn more about solid compound
https://brainly.com/question/1024087
#SPJ1
If the partial pressure of Aris 749 torr, calculate the total pressure (torr) of the mixture visualized. o o o o o o O o O o o O O 20 ON 11,235 torr 749 torr 803 torr 699 torr
To calculate the total pressure of the mixture, we need to add up the partial pressures of all the gases in the mixture. The partial pressures given are:
Ar: 749 torr
O2: 11,235 torr
N2: 803 torr
Other gases (assumed to be negligible): 699 torr
Therefore, the total pressure of the mixture is:
749 torr + 11,235 torr + 803 torr + 699 torr = 13,486 torr
Therefore, the total pressure of the mixture is 13,486 torr.
The overall pressure ptot is the total of all pressures in a reference system. This pressure, according to Bernoulli (see Fluid mechanics), consists of the static pressure p, the dynamic pressure pdyn, and the geodetic component ( g z) that exists in a fluid along a stream line in a frictionless flow.
The total pressure of a gas mixture is the sum of its component gases' partial pressures: Ptot = ∑Pi = P1 + P2 + P3... ntot = total number of moles in the gas mixture (the sum of all ni).
For more questions like Aris 749 torr visit the link below:
https://brainly.com/question/27549418
#SPJ4
For the synthesis of ammonia
N2 (g) +3H2 (g) = 2NH3 (g)
The equilibrium constant Kc at 375 degrees C is 1.2. Starting with [H2] = 0.76M, [N2] = 0.60M, and [NH3] = 0.48M, which gases will have increased in concentration and which will have decreased in concentration when the mixture comes to equilibrium?
[NH3] will increase and [N2] and [H2] will decrease in concentration when the mixture comes to equilibrium.
What is concentration?
In chemistry, concentration is a measure of the amount of a substance in a given volume of a solution or mixture. It is usually expressed in terms of the number of moles of the substance per liters of solution or mixture.
We have an equilibrium constant of Ke = 1.2 at 375°C and the starting concentrations are [H2]0 = 0.76 M, [N2]0 = 0.60 M, and [NH3]0 = 0.48 M.
Concentration at equilibrium is,
N2(g) + 3H2(g) — 2 NH3 (g)
We shall determine whether the reaction will move forward or backward by calculating the reaction Q. If Q < K, the reaction will proceed forward so the concentration of reactants will decrease and that of products will increase. The opposite will happen if Q> K (reaction proceeds backwards).
[tex]Q= \frac{NH_{3} ^{2} }{[N_{2} ] [H_{2}]^{3} } = \frac{0.48^{2} }{(0.60) (0.76)^{3} } = 0.87[/tex]
Since Q < [tex]K_{cr}[/tex], the reaction will proceed forward. Therefore, the concentration of reactants N2 and H2 will decrease while the concentration of the product NH3 will increase.
Therefore, [NH3] will increase and [N2] and [H2] will decrease.
To learn more about concentration from the link
https://brainly.com/question/10725862
#SPJ1
The process of having a Na+ be caged by water molecules as a result of the attrative ion-dipole interactions is ___________.
A. endothermic
B. exothermic
C. Not enough information
The process of having a Na+ ion be caged by water molecules as a result of the attractive ion-dipole interactions is B.)exothermic.
What is exothermic process ?The process of having Na+ be caged by water molecules as a result of attractive ion-dipole interactions is exothermic meaning it releases heat. This is because the formation of ion-dipole bonds between Na+ ion and water molecules is energetically favorable, resulting in release of energy in the form of heat.
In thermodynamics, exothermic process is a thermodynamic process that releases energy from the system to surroundings, in the form of heat, but sometimes in a form of light, electricity or sound.
To know more about exothermic, refer
https://brainly.com/question/2924714
#SPJ1
you have used a bacterium to propagate a gene that produces a special plant protein that may hold a cure for stomach cancer. identify the function of these items you used in lesson 4
The function of these materials you utilized in the lesson is bacteria, gene, recombinant DNA technology, plasmid vector, and protein expression system. We have employed a bacterium to propagate a gene that makes a specific plant protein that may hold a cure for stomach cancer.
What Is Protein?Protein makes up the majority of the body's organs, tissues, and body parts, include muscle, bone, skin, or hair. It aids in the production of hemoglobin, which transports oxygen in the blood, and enzymes, which fuel a variety of chemical reactions. The majority of the body's organs, tissues, and body parts, including muscle, bone, skin, and hair, are made of protein. It aids in the production of hemoglobin, which transports oxygen in the blood, and enzymes, which fuel a variety of chemical reactions. At least 10,000 different proteins make up you, and they also keep reader that way.
What is the role of protein?Every cell in the human body has protein. To repair damaged cells and create new ones, your body needs protein in your diet. For toddlers, teenagers, and expectant women to develop properly and expand to their full potential, protein is crucial. It accelerates metabolic reactions, synchronizes biological processes, and promotes tissue growth and repair. Proteins give your body its structural support and ensure optimal pH and fluid equilibration.
To know more about Protein visit:
https://brainly.com/question/29776206
#SPJ4
help!
Silver chloride is prepared according to the following equation: NaCI + AgNO3 = AgCl + NaNO3
i. Which is the limiting reagent when 6.3 g of NaCl and 170ml of 0.40M AgNO3 (aq) solution react?
ii. What would be the theoretical yield of silver chloride?
iii. What would the actual yield be (grams) if this reaction resulted in a 78% yield (percentage yield)?
The limiting reagent is AgNO₃
The theoretical yield of silver chloride is 9.75 g AgCl
The actual yield of silver chloride is 7.60 g AgCl
What is the limiting reagent in the reaction?The limiting reagent in the reaction is determined from the mole ratio of the reaction as given in the equation of the reaction.
Equation of reaction: NaCI + AgNO₃ ---> AgCl + NaNO₃
Mole ratio of the reactants is 1 : 1
Moles of NaCl reacting = 6.3/58.5
Moles of NaCl reacting = 0.108 moles
Moles of AgNO₃ reacting = 0.170 * 0.40
Moles of AgNO₃ reacting = 0.68 moles
The limiting reagent is AgNO₃
The theoretical yield of silver chloride =
0.068 moles * (143.32 g AgCl/mole)
The theoretical yield of silver chloride = 9.75 g AgCl
The actual yield of silver chloride = 9.75 g AgCl x (78%)
The actual yield of silver chloride = 7.60 g AgCl
Learn more about limiting reagents at: https://brainly.com/question/23661051
#SPJ1
For the following materials, indicate the predominate cohesive force that binds the particles together to form a solid specimen (presuming each specimen is below its respective melting temperature). In other words, what is the predominate inter-particle bond for the materials listed below when they are present as solids. (Particle is generic for atom, ion, molecule.) Some options may be used more than once, or perhaps not at all Hint: These should be fairly obvious cases that you can hopefully answer with simple logic, and a basic knowledge of the periodic table Aluminum Choose ] Silicon Choose ] Lithium Fluoride (LiF) IChoose ] Neon Choose ] Water (again, not looking for the intramolecular bond here, but rather the intermolecular bond) Potassium Bromide (KBr) IChoose ] Brass (CopperZinc Alloy) IChoose ] Germanium Choose ] Silicon Carbide IChoose ] Octane Choose ]
The predominate inter-particle bond for each material is:
Aluminum - MetallicSilicon - CovalentLithium Fluoride (LiF) - IonicNeon - London KeesomWater - HydrogenPotassium Bromide (KBr) - IonicBrass (CopperZinc Alloy) - MetallicGermanium - CovalentSilicon Carbide - CovalentOctane - London KeesomThe cohesive forces that bind particles together in a solid material are determined by the nature of the atoms, ions, or molecules that make up the material. Some materials are composed of atoms that are held together by strong covalent bonds, whereas others are made up of ions that are attracted to each other by electrostatic forces.
Metallic materials have delocalized electrons that form a "sea" of electrons which hold the metal ions together. London Keesom forces are present in all materials, and arise from instantaneous dipoles that are formed in molecules. Hydrogen bonds are formed between molecules that have a hydrogen atom bonded to an electronegative atom.
By considering the nature of the constituent particles, it is possible to identify the predominant inter-particle bond that holds a solid material together.
This question should be provided with the options, which are: ebye, ionic, metallic, hydrogen, london keesom, covalent.
Learn more about bonding types brainly.com/question/2026679
#SPJ4
6. from the mass of agno3 weighed out at the beginning of this experiment, calculate the number of moles of agno3 used in the experiment.
To calculate the number of moles of AgNO₃ used in an experiment, we need to know the mass of AgNO₃ weighed out and the molar mass of AgNO₃.
By adding the atomic masses of the component elements, it is possible to get the molar mass of AgNO₃: AgNO₃ = Ag + N + 3O.
AgNO₃'s molar mass = as (1 × Ag atomic mass) + (1 × N atomic mass) + (3 × atomic mass of O)
AgNO₃'s molar mass = 1 × 107.87 g/mol + 1 × 14.01 g/mol + 3 × 16.00 g/mol.
∴ AgNO₃'s molar mass = 169.87 g/mol.
By dividing the mass of weighed-out AgNO₃ by its molar mass, we can now determine how many moles of AgNO₃ were utilized in the experiment:
AgNO₃'s mass and molar mass are used to calculate its moles.
For example: if 2.5 grams of AgNO₃ were weighed out at the beginning of the experiment, the calculation would be:
moles of AgNO₃ = 2.5 g ÷ 169.87 g/mol
moles of AgNO₃ = 0.0147 mol
∴, 0.0147 moles of AgNO₃ were used in the experiment.
Learn more about how to calculate moles for a compound here:
https://brainly.com/question/21911991
#SPJ4
if you decrease temperature of an endothermic reaction, will the reaction favor products or reactants_________
if you decrease temperature of an endothermic reaction, will the reaction favor products or reactants will shift it in the direction that is exothermic.
About exothermicExothermic reactions are chemical reactions that occur in everyday life. Exothermic reactions have certain characteristics that distinguish them from endothermic reactions.
The characteristics of an exothermic reaction are:
Higher reactant energy Release heat Heat is absorbed by the environment Negative enthalpy change Decreasing energy diagramLearn more about exothermic at https://brainly.com/question/3971357
#SPJ4
Consider an ideal gas enclosed in a 1.00 L container at an internal pressure of 10.0 atm. Calculate the work, w, if the gas expands against a constant external pressure of 1.00 atm to a final volume of 25.0 L.
I understood how to do this first paer of the question...
I did 1atm * 24L = 24.0J
Then did -24*101.325= -2431.8
It is the second part of the question I do not understand....
Now calculate the work done if this process is carried out in two steps. 1. First, let the gas expand against a constant external pressure of 5.00 atm to a volume of 5.00 L. 2. From there, let the gas expand to 25.0 L against a constant external pressure of 1.00 atm.
The answer is -4040 but how do you get that answer?
The work done by the gas during an expansion is, -0.0242 MJ.
The work done by the gas during an expansion is given by the equation:
w = -P_extΔV
where P_ext is the external pressure,
ΔV is the change in volume of the gas.
The gas is expanding from an initial volume of 1.00 L to a final volume of 25.0 L, so:
ΔV = V_final - V_initial = 24.0 L
The external pressure is given as 1.00 atm = 1.01 × 10^-3 MPa
The work done by the gas is:
w = -P_extΔV = -(1.01 × 10^-3 MPa)(24.0 L) = -0.0242 MJ
Note that the negative sign indicates that the work is done by the gas on the surroundings.
To know more about the pressure, here
brainly.com/question/22613963
#SPJ4
What is the mass of a piece
of iron that has a volume
of 1.00 cm3 ? The density of
iron is 7.90 g/cm3
7.90g is the mass of a piece of iron that has a volume of 1.00 cm³.
It is the most abundant element on Earth by mass.
What is iron?Iron has the chemical symbol Fe (from Latin: ferrum) as well as the atomic number 26. It is a metal from the periodic table's first transition series within group 8.
It is the most abundant element on Earth by mass, currently ahead behind oxygen (32.1% and 30.1%, respectively), and makes up much of the Earth's outer and inner cores.
density = mass /volume
7.90 g/cm³ = mass/ 1.00 cm³
mass = 7.90 ×1.00 g=7.90g
Therefore, 7.90g is the mass of a piece of iron that has a volume of 1.00 cm³.
To learn more about iron, here:
https://brainly.com/question/866200
#SPJ9
When 12 oz. cans of regular Coke and Diet Coke are placed in a large container of water, some float while others sink.
Diet Coke will
[ Select ]
in a large container of water because
[ Select ]
and therefore has
[ Select ]
.
Diet Coke will float in a large container of water because it has less mass and therefore has less density than regular Coke.
What is the relationship between density and floating?The relationship between density and floating is that an object will float in a fluid if it is less dense than the fluid. This is because buoyant force, which is the upward force exerted by a fluid on an object immersed in it, is greater than the weight of the object.
On the other hand, an object will sink in a fluid if it is more dense than the fluid, because the weight of the object is greater than the buoyant force acting on it.
Learn more on density here: https://brainly.com/question/6838128
#SPJ1
If a glass of water contains (6.00x10^24) hydrogen atoms, how many moles of H2O are present? The Avogadro constant is 6.02 x 1023 mol-1.
If a glass of water contains( 6.022×10²⁴) hydrogen atoms, how many moles of H[tex]_2[/tex]O are present, 10 moles are there.
What is water?Water has the chemical formula H[tex]_2[/tex]O and is an inorganic substance. It is a clear, tasteless, odorless, and almost colorless chemical substance that is the primary ingredient of the Earth's hydrosphere as well as the fluids of all recognized living species.
Despite not supplying food, energy, or organic micronutrients, it is essential for all known life forms. Its chemical equation, H[tex]_2[/tex]O, reveals that every single its molecules is made up of one hydrogen atom and two oxygen atoms that are linked together by covalent bonds.
mole = given number of atom/ Avogadro number
= 6.022×10²⁴ / 6.022×10²³
= 10 moles
Therefore, 10 moles are there.
To learn more about water, here:
https://brainly.com/question/16630851
#SPJ9
which of the following statements is true? a weak acid solution consists of mostly non-ionized acid molecules
The statements that true is A weak acid solution consists of mostly insoluble acid molecules.
The definition of a weak acid is something that partially dissociates into a solvent. This also implies that the majority of the molecules in a mild acid solution continue to be insoluble in their natural state.
A strong electrolyte is a solution in which all solute particles entirely separate into ions in a solvent.
A weak electrolyte, on the other hand, is a solution in which solute particles only partially split apart into ions.
As like dissolves like, a molecular compound is a covalent compound. In polar solvents like water, molecular molecules cannot dissolve.
Your question is incomplete but most probably your full question was Choose the statement below that is TRUE.
a. A weak acid solution consists of mostly non-ionized acid molecules.
b. The term "strong electrolyte" means that the substance is extremely reactive.
c. A strong acid solution consists of only partially ionized acid molecules.
d. The term "weak electrolyte" means that the substance is inert.
e. A molecular compound that does not ionize in solution is considered a strong electrolyte.
learn more about weak acid at https://brainly.com/question/15602059
#SPJ4
The molecules of substance A exhibit stronger intermolecular forces than the molecules of substance B. Which of the following statements are true? (Select all that apply.)
A. The boiling point of substance A is higher than the boiling point of substance B.
B. The heat of vaporization of substance A is higher than the heat of vaporization of substance B.
C. Substance A contains hydrogen bonds.
D. The vapor pressure of substance A is higher than the vapor pressure of substance B.
It is true that substance A has hydrogen bonds and that substance A has a higher boiling point than substance B. Moreover, substance A has a larger heat of vaporization than substance B.
The strongest intermolecular forces can be seen in which of the following molecules?In particular, the hydrogen-bonding subgroup of dipole-dipole interactions, which occurs when a hydrogen is in close proximity to (connected to) a strongly electronegative element strongest intermolecular force (namely oxygen, nitrogen, or fluorine).
What transpires when a molecule's intermolecular forces are stronger?As a general rule, more energy is needed to overcome intermolecular forces of attraction that are greater. Ionic and polar covalent molecules thus have higher Compared to covalent compounds, these substances have greater melting and boiling temperatures as well as enthalpies of fusion and vaporization.
To know more about hydrogen bonds visit:-
https://brainly.com/question/17659933
#SPJ1
Based on the graph, what statement is true about Earth's water distribution?
The statement that is true about Earth's water distribution is that the majority of the Earth's water is in the oceans.
What is water ?Water is a transparent, tasteless, odorless, and nearly colorless chemical substance, which is the main constituent of Earth's hydrosphere and the fluids of all known living organisms. It is vital for all known forms of life, even though it provides no calories or organic nutrients. Its chemical formula is H20, meaning each of its molecules contains one oxygen and two hydrogen atoms that are connected by covalent bonds. Water plays an important role in the world economy, as it functions as a solvent for a wide variety of chemical substances and facilitates industrial cooling and transportation. It is also essential for sanitation, hygiene, and the production of hydroelectric power.
This is evident from the graph, which shows that the oceans make up about 97% of Earth's water, while the other 3% is composed of freshwater lakes, rivers, and groundwater. This indicates that the vast majority of Earth's water is in the oceans, and that there is only a small amount of freshwater available for human use.
To learn more about water
https://brainly.com/question/25326161
#SPJ1
When a mixture of 56.0 g acetylene, c2h2 , and 81.0 g oxygen, o2 , is ignited, the resultant combustion reaction produces co2 and h2o . (a) Write the balanced chemical equation for this reaction. (b) Which is the limiting reactant? (c) How many grams of C2H2, O2, CO2, and H2O are present after the reaction is complete?
When a mixture of 56.0 g acetylene,C₂H₂ , and 81.0 g oxygen, O₂ , is ignited, the resultant combustion reaction produces CO₂ and H₂O. There are 27.144 g C₂H₂, 91.872 g CO₂, and 18.792 g H₂O present after the reaction is complete with the oxygen as limiting reactant.
First we should write the balance chemical equation
2C₂H₂ + 5O₂ =4CO₂ + 2H₂O
Then we can calculate the moles of the reactant
Moles acetylene = mass / mass molar
Moles acetylene = 56 g / 26 g/ moles
Moles acetylene = 2.15 moles
Moles oxygen = mass / mass molar
Moles oxygen = 81 g / 31 g/ moles
Moles oxygen = 2.61 moles
From the reaction we know that 2 moles of acetylene reacted with 5 moles of oxygen produce 4 mole of carbon dioxide an 2 moles water. in this reaction oxygen fully reacted an acetylene excess so the limiting reactant is oxygen.
Because of oxygen is fully reacted the moles acetylene that present after reaction complete will be
Moles acetylene = 2/5 x mole oxygen
Moles acetylene = 2/5 x 2.61 moles
Moles acetylene = 1.044 moles
mass acetylene = moles x mass molar
Mass acetylene = 1.044 moles x 26 g/ moles
Mass acetylene = 27.144 g
Moles CO₂= 4/5 x mole oxygen
Moles CO₂= 4/5 x 2.61
Moles CO₂= 2.088 moles
Mass CO₂ = moles x mass molar
Mass CO₂ = 2.088 moles x 44 g/ moles
Mass CO₂ = 91.872 g
Moles H₂O = 2/5 x mole oxygen
Moles H₂O = 2/5 x 2.61 moles
Moles H₂O = 1.044 moles
Mass H₂O = moles x mass molar
Mass H₂O = 1.044 moles x 18 g/ moles
Mass H₂O = 18.792 g
Learn more about mass at https://brainly.com/question/4590268
#SPJ4
You received no credit for this question in the 16 1 attempt let Check my work 0.75 points Select the single best answer. Which one of the following isomers of bromodimethylbenzene cannot undergo nucleophilic aromatic substitution by treatment with sodium amide in liquid ammonia? CH CH, CH, o сн. H.C pr Br CH References B Br CH CH S Prov o EI Type here to search
The correct answer is B.Bromodimethylbenzene B cannot undergo nucleophilic aromatic substitution
By treatment with sodium amide in liquid ammonia because the two bromine atoms attached to the benzene ring are meta-directing, which would prevent the reaction from occurring.Bromodimethylbenzene is an organic compound made up of a benzene ring with two bromine atoms and two methyl groups attached. It is a colorless liquid at room temperature and has a slightly sweet odor. It is used as an intermediate in the production of a variety of organic compounds, such as dyes and pharmaceuticals. It can also be used as a solvent for various compounds. Bromodimethylbenzene is a toxic substance and should be handled with caution.
learn more about methyl groups Refer:brainly.com/question/13408577
#SPJ4
atomic absorption spectrophotometry is a characterization technique which determines [ select ] , the total dissolved solids (tds) of a sample gives a measure of [ select ] while edta titrations measures [ select ]
Atomic ingestion The concentration of particular metal ions in a sample, such as calcium, iron, or copper, can be found using the characterisation technique known as spectrophotometry.
What is meant by atomic absorption?Ground-state metal atoms absorb light at extremely particular wavelengths that correspond to the energy required to trigger electronic transitions in their electron orbitals in a process known as atomic absorption. Atomic absorption and emission spectroscopy is a Spectro analytical method for determining chemical elements quantitatively using free atoms in the gaseous state. The foundation of atomic absorption spectroscopy is the light absorption of free metallic ions.
How does atomic absorption work?By using certain electromagnetic radiation wavelengths from a light source, atomic absorption spectrometry (AAS) may identify elements in either liquid or solid samples. Different wavelengths will be absorbed by different elements, and these absorbances are evaluated in comparison to standards. By absorbing energy (light) at a certain wavelength, an electron is stimulated from the ground state to a higher energy level. In atomic absorption spectroscopy, the type of atom (which element it is) and the energy levels the electrons are travelling to determine the wavelength of absorbed light.
To know more about Atomic Absorption visit:
https://brainly.com/question/28007345
#SPJ4
Calculate the concentrations of each ion remaining in solution after the precipitation is complete.
The precipitation reaction involves 75.0 mL of .0750 M solution of potassium phosphate and 75.0 mL of .0750 M iron (II) acetate.
The concentrations of each ion remaining in solution after the precipitation is complete are [Fe2+] = 0.0375 M, [PO43-] = 0.01875 M, [K+] = 0.1125 M, and [CH3COO-] = 0.0375 M.
What is Precipitation ?
Precipitation can occur in a variety of chemical reactions, but it is most commonly associated with double displacement reactions, where two ionic compounds are mixed together and the cations and anions switch partners. If one of the resulting products is insoluble, it will form a solid that will settle to the bottom of the container.
To solve this problem, we need to determine the products of the reaction between potassium phosphate (K3PO4) and iron (II) acetate (Fe(CH3COO)2), which will result in the precipitation of an insoluble salt.
The balanced chemical equation for the reaction is:
2Fe(CH3COO)2 + 3K3PO4 → Fe3(PO4)2 + 6CH3COOK
From the equation, we can see that the products of the reaction are iron(III) phosphate (Fe3(PO4)2) and potassium acetate (CH3COOK).
To determine the concentrations of the ions remaining in solution, we can use the following steps:
Calculate the number of moles of potassium phosphate and iron (II) acetate in the solutions:
moles of K3PO4 = 0.0750 M x 0.0750 L = 0.005625 mol
moles of Fe(CH3COO)2 = 0.0750 M x 0.0750 L = 0.005625 mol
Determine the limiting reactant. Since the stoichiometric ratio of K3PO4 to Fe(CH3COO)2 is 3:2, we can see that the limiting reactant is Fe(CH3COO)2, since we have an equal number of moles of both reactants.
Use the stoichiometry of the balanced chemical equation to calculate the number of moles of the products:
moles of Fe3(PO4)2 = (0.005625 mol Fe(CH3COO)2) x (1 mol Fe3(PO4)2 / 2 mol Fe(CH3COO)2) = 0.002813 mol
moles of CH3COOK = (0.005625 mol Fe(CH3COO)2) x (6 mol CH3COOK / 2 mol Fe(CH3COO)2) = 0.016875 mol
Calculate the concentrations of the remaining ions by subtracting the number of moles of the reactants from the number of moles of the initial solution and dividing by the total volume:
[Fe2+] = (0.005625 mol - 0 mol) / 0.150 L = 0.0375 M
[PO43-] = (0.005625 mol - 0.002813 mol) / 0.150 L = 0.01875 M
[K+] = (0.016875 mol - 0 mol) / 0.150 L = 0.1125 M
[CH3COO-] = (0.005625 mol - 0 mol) / 0.150 L = 0.0375 M
Therefore, the concentrations of each ion remaining in solution after the precipitation is complete are [Fe2+] = 0.0375 M, [PO43-] = 0.01875 M, [K+] = 0.1125 M, and [CH3COO-] = 0.0375 M.
Learn more about Precipitation from given link
https://brainly.com/question/13877944
#SPJ4