The percentage of mass is electrons in carbon-12 is 50, 02%.
What is an atomic mass unit?Every element's atomic mass is expressed in terms of the atomic mass unit (AMU or amu). The AMU expresses both the atomic masses and the molecular masses and is commonly referred to as the dalton (Da) or unified atomic mass unit (u). AMU is explained as being one-twelfth the mass of a carbon-12 atom (12C). A carbon-12 atom's mass is precisely 1/12 of an atomic mass unit. The nucleus of an atom of carbon-12 contains six neutrons and six protons. It's written as a.m.u or u. (unified). Atomic masses are expressed using this unit of mass. The average of the neutron rest mass and the proton rest mass is 1 a.m.u. The carbon-12 atom contains 6 protons, neutrons, and electrons. The mass proportion of neutrons is therefore equal to: 6x1.0087/(6x1.0087+6x1.0073+6x5.4858x10^-4)=0.50021110822=50,021110822%.
Solution: 50, 02%.
To know more about carbon-12 atom, visit:
https://brainly.com/question/3994829
#SPJ4
1. Every human cell (when in the non-diving state) contains a total of 6x 109 base-pairs of DNA. The separate between the base pairs on DNA strands is about 3.3 Angstrom. Calculate the total length of DNA in every cell. Express the answer in meters and round to an integer number.2. The diameter of a typical human cell is 10 um. Based on your answer to the previous question, how many cells can one line up along the length of the DNA from one cell?
1. To calculate the total length of DNA in a human cell, we first need to convert the number of base pairs to meters.
The distance between base pairs is given as 3.3 Angstroms, so we need to convert this to meters.
1 Angstrom = 10^-10 meters
So, 3.3 Angstrom = 3.3 x 10^-10 meters
The total number of base pairs in one cell is 6 x 10^9, so the total length of DNA in one cell is:
6 x 10^9 base-pairs x 3.3 x 10^-10 meters/base-pair = 0.198 meters
2. To calculate the number of cells that can be lined up along the length of the DNA from one cell, we need to divide the length of the DNA by the diameter of a cell.
The diameter of a typical human cell is 10 um, so we need to convert this to meters:
10 um = 10^-6 meters
The length of DNA in one cell is 0.198 meters, so the number of cells that can be lined up along the length of the DNA from one cell is:
0.198 meters / (10^-6 meters/cell) = 1.98 x 10^6 cells
Rounding this answer to an integer number, we get 1.98 x 10^6 cells = 1,980,000 cells.
To Learn More About DNA click
https://brainly.com/question/264225
#SPJ4
light travels at 300,000 km/sec. about how far does light travel in 10 years?
As we move through the Milky Way galaxy, convert to light-years. NASA/JPL-Caltech is credited with producing the video. With the use of light-time, we can measure the vast distances of space.
What is the concept of light year?Light flows through interstellar space at a speed of 186,000 miles per second (300,000 km/s) and a rate of 5.88 trillion miles (9.46 trillion km/s) each year.
Given the amount of time it takes for light to reach our eyes, everything we see in the night sky has already occurred. In other words, if you see something from a distance of 1 light-year away, you see it precisely as it was a year ago.
Therefore, The distance that light travels in a light-year is one year. Light flows through interstellar space at a speed of 186,000 miles per second (300,000 km/s) and a rate of 5.88 trillion miles (9.46 trillion km/s) each year.
Learn more about light year here:
https://brainly.com/question/1302132
#SPJ4
As we move through the Milky Way galaxy, convert to light-years. Caltech is credited with producing the video. With the use of light-time, we can measure the vast distances of space.
What is the concept of light year?Light flows through interstellar space at a speed of 186,000 miles per second (300,000 km/s) and a rate of 5.88 trillion miles (9.46 trillion km/s) each year.
Given the amount of time it takes for light to reach our eyes, everything we see in the night sky has already occurred. In other words, if you see something from a distance of 1 light-year away, you see it precisely as it was a year ago.
Therefore, The distance that light travels in a light-year is one year. Light flows through interstellar space at a speed of 186,000 miles per second (300,000 km/s) and a rate of 5.88 trillion miles (9.46 trillion km/s) each year.
Learn more about light year here:
brainly.com/question/1302132
#SPJ4
A 1250 kg car traveling at a speed of 25.0 m/s rounds a 175 m radius curve.
Assuming the road is level, determine the coefficient of static friction between the car’s tires and the road.
Assuming that the curve is banked and the road is frictionless, determine the bank angle with respect to the horizontal.
The tire's static friction coefficient with the ground is 0.3.
What is static friction?
Static friction is a force that maintains an object at rest. Static friction is defined as the resistance one encounters when attempting to move a stationary object across a surface without actually moving their body or the surface, they are moving the object across.
Give a static friction illustration.
Static friction has an impact on an object when it is resting on a surface. For instance, when hiking through the woods, there is static friction created between your shoes and the ground with each step you take.
To learn more about static friction, Visit:
brainly.com/question/13754413
#SPJ4
A physics student adds two displacement vectors with magnitudes of 8. 0 km and 4. 0 km. Which one of the following statements is true concerning the magnitude of the resultant displacement?.
The resultant displacement when adding two displacement vectors with magnitudes of 8.0 km and 4.0 km will have a magnitude of 10 km.
This is because the magnitude of the resultant displacement vector is equal to the square root of the sum of the squares of the magnitudes of the individual vectors. In this case, the magnitude of the resultant displacement vector is equal to the square root of (8.0 x 8.0) + (4.0 x 4.0), which is equal to 10 km.
Adding two vectors together can also be done by using the trigonometric method. The magnitude of the resultant vector is equal to the sum of the magnitudes of the individual vectors, while the direction of the resultant vector is the angle between the two vectors. To calculate the magnitude of the resultant vector, we use the Pythagorean theorem and the Law of Cosines.
Learn more about the magnitude of the displacement:
https://brainly.com/question/19104773
#SPJ4
with what initial speed must a ball be thrown straight up to reach the same maximum height hh ?
The initial speed required to reach a maximum height hh is equal to √2gh, where g is the acceleration due to gravity and h is the height.
What is the acceleration ?
Acceleration is the rate of change of velocity over time, and is usually denoted by the symbol a. It is an important concept in physics and is related to force, mass, and velocity. Acceleration can be calculated by dividing the change in velocity by the time it took for the change to occur. Acceleration is a vector quantity, meaning that it has both magnitude and direction. When an object changes its direction, its acceleration is not constant and is referred to as centripetal acceleration. In the absence of external forces, objects in motion tend to maintain constant speed in a straight line, and therefore have no acceleration.
To learn more about acceleration
https://brainly.com/question/460763
#SPJ4
15 What are the S.I. units of K so that the equation Velocity = K x density is dimensionally correct? Give your answer in terms of the basic units. (Kg ¹m45-¹)
The S.I units of K so that the equation velocity = K × density is dimensionally correct is Kg⁻¹m⁴s⁻¹
How do I determine the S.I units of K?Velocity is defined as follow:
Velocity = displacement / time
Thus, the S.I units of velocity is m/s
Density is defined as mass per unit volume i.e
Density = mass / volume
Thus, the S.I units of density is Kg/m³
With the above information, we can determine the the S.I units of K. Details below:
S.I units of velocity = m/sS.I units of density = Kg/m³S.I units of K =?Velocity = K × density
m/s = K × Kg/m³
Divide both sides by Kg/m³
K = (m/s) / (Kg/m³)
Invert
K = m/s × m³/Kg
K = m⁴/sKg
K = Kg⁻¹m⁴s⁻¹
Thus, we can conclude that the S.I units of K is Kg⁻¹m⁴s⁻¹
Learn more about S.I units:
https://brainly.com/question/13515193
#SPJ1
to remove the cannula at the end of a laparoscopy, the surgeon pulls on the cannula with increasing force. how does the frictional force vary with the applied pulling force before and after the cannula begins to slide?
When the pulling force is first applied, the cannula doesn't move because of the static friction. After a while, at a certain amount of applied force, friction increases until the limit reached its threshold for the motion.
Friction is the force that resists the sliding motion between two surfaces. It can be kinetic or static. Static friction happens when the two surfaces don't slide because the amount of static friction fully counteracts an applied force. It happens until the upper limit is reached, which will happen when one applied enough amount of force to the surface. Once the upper limit is reached, the surfaces will start to slide against each other, in which the static friction becomes kinetic friction.
Learn more about friction at https://brainly.com/question/15122221
#SPJ4
If you are traveling 60 km, how many mph is that?
60 kilometers per hour is equal to 37.28 miles per hour.
Define distance.
Distance is the sum of an object's movements, regardless of direction. Distance can be defined as the amount of space an object has covered, regardless of its starting or ending position.
The pace at which an object's position changes in any direction is referred to as its speed. The distance traveled in relation to the time it took to travel that distance is how speed is defined. Since speed simply has a direction and no magnitude, it is a scalar quantity. You must always multiply or divide by 1.6 to determine MPH. When moving at 60 km/h, the calculation is 60/1.609344, or 37.28 mph.
To learn more about speed use link below:
https://brainly.com/question/13943409
#SPJ4
Because sound is a wave, it's possible to make a diffraction grating for sound from a large board of sound-absorbing material with several parallel slits cut for sound to go through. When 11 kHz sound waves pass through such a grating, listeners 8. 0 m from the grating report "loud spots" 1. 6 m on both sides of the center. What is the spacing between the slits? Use 340 m/s for the speed of sound
The diffraction grating equation, d sin θ = mλ, is used to calculate the grating spacing, d, in a diffraction grating. The equation relates the wavelength of the wave, λ, the grating spacing, d, and the diffraction angle, θ.
The diffraction angle is defined as the angle between the incident wave and the diffracted wave as it leaves the grating. The integer, m, represents the order of the diffracted wave and can be 0, 1, 2, and so on. To determine the grating spacing, you would need to know the diffraction angle, the wavelength of the 11 kHz wave, and the value of m. The speed of sound, which is 340 m/s, can then be used to calculate the wavelength of the wave. Once the wavelength is known, the diffraction grating equation can be used to determine the grating spacing.
Find out more about diffraction
brainly.com/question/12290582
#SPJ4
the position of the particle as a function of time is given by x(t) = e-(t - 3)2, where x is in meters and t is in seconds. what is the velocity of the particle, in meters per second, at t = 2.9 s?
For a particle having a position of function e^-(t - 3)², the velocity at 2.9 s is calculated to be 0.198008 m/s.
The position of a particle is denoted by a function x(t) = e^-(t - 3)², where x is the distance and t is the time.
Differentiate the function, to find velocity.
v(x) = d/dt(x) = d/dt[e^-(t - 3)²]
v(x) = e^-(t - 3)²[-2(t - 3)]
Now, substitute the value of t = 2.9 in the equation
v(2.9) = e^-(2.9 - 3)²[-2(2.9 - 3)]
v(2.9) = e^-(-0.1)²[-2(-0.1)]
Use the exponent formula a^-b = 1/a^b
v(2.9) = 1/e^(-0.1)²[0.2]
v(2.9) = 1/e^(0.01)[0.2]
Substitute the value of e^0.01 = 1.01005
v(2.9) = (1/1.01005)[0.2]
Use the arithmetic operation of division,
v(2.9) = (0.99004)[0.2]
v(2.9) = 0.198008
Therefore, the velocity of the particle is 0.198008 m/s.
To know more about velocity:
https://brainly.com/question/30466139
#SPJ4
if a solution appears red, approximately what wavelength of light is it absorbing?
A solution that appears red is absorbing light between 400 and 700 nm in wavelength.
Photons with various wavelengths make up the electromagnetic spectrum (EM) spectrum. In a narrow region of the electromagnetic spectrum, photons, which are unusual in that they exhibit both wave-like and particle-like properties, produce visible light and colors.
The wavelengths of this portion of visible light are roughly in the 400–700 nm range (one nm is equal to 10-9 meters). When all the wavelengths are present, it appears as white light. Each particular wavelength is associated with a different color.
Because all light travels at the same speed, the relationship between a wave's wavelength and frequency is inverse: as one value increases, the other value decreases.
To know more about wavelength visit:
brainly.com/question/30471145
#SPJ4
what is the difference between heat capacity, specific heat, and latent heat? select all statements that are true. what is the difference between heat capacity, specific heat, and latent heat? select all statements that are true. latent heat describes the amount of heat energy exchanged to change the phase of an object. specific heat and heat capacity describe the amount of heat energy required to change the temperature of an object. latent heat describes the amount of heat energy required to change the temperature of an object. specific heat depends on the mass of the object while heat capacity only depends on the material the object is made of. specific heat and heat capacity describe the amount of heat energy exchanged to change the phase of an object. heat capacity depends on the mass of the object while specific heat only depends on the material the object is made of.
The amount of energy necessary to increase a substance's temperature by 1°C (1 K) per unit mass is called its specific heat capacity. The amount of energy needed to change a substance's phase without causing a temperature change is known as latent heat.
What is specific heat ?
The amount of energy required to raise a substance's temperature by one degree Celsius per gramme is referred to as specific heat. Specific heat is typically measured in calories or joules per gramme per degree Celsius. Water, for example, has a specific heat of 1 calorie (or 4.186 joules) per gramme per degree Celsius.
The value of specific heat is unaffected by the size of the sample because it is the heat capacity per unit mass.
The term "latent heat" (L) refers to the energy that is either absorbed or released when a substance undergoes a phase change. A gas to a liquid transition, a liquid to solid transition, or the reverse is possible. ld either be from a gas to a liquid or liquid to solid and vice versa.
L = Q/m
L is the specific latent heat, Q is the heat retained or discharged and m is the mass of a substance.
1) False(During phase transition temperature does not change)
2) True
3) True
4) False (energy to change phase is latent heat)
5) False
6) True
To learn more about Specific heat, click the given link,
https://brainly.com/question/214068
#SPJ4
How much work must be done on a spring with a spring constant of 80 N/m to stretch the spring 20 cm?
The amount of work that must be done on the spring to stretch it to 20 cm is 1.6 J.
What is the amount of work done on the spring?The amount of work done on the spring is calculated by applying the following formula as shown below.
W = ¹/₂kx²
where;
k is the spring constantx is the extension of the springThe amount of work that must be done on the spring to stretch it to 20 cm is calculated as follows;
W = ¹/₂ x ( 80 N/m ) x ( 0.2 m ) ²
W = 1.6 J
Learn more about work done here: https://brainly.com/question/8119756
#SPJ1
What is the label of the parts of microscope?
the elements of a microscope's label The specimen's picture is enlarged by the eyepiece lens. Body tube or eyepiece tube. The eyepiece is kept in the tube. Nosepiece. unbiased lenses Stage Arm. Script clips. .
What is the definition and purpose of a microscope?A telescope is a tool that can be utilized to examine cells and other tiny objects. Through at least single lens in the microscope, an object's picture is enlarged. Because of the way this lens bends light, an object appears larger than it is.
Why is it crucial to recognize the components of a microscope?Before utilizing a microscope, you should become familiar with its various components because you'll need to learn where each one is located on your instrument.
To know more about eyepiece visit :
https://brainly.com/question/29570828
#SPJ4
a bedding plane dips 190/80 with slicken lines on the surface that trend n60w. using a stereonet, determine the plunge of the lineation
The plunge of a lineation on a bedding plane can be determined by plotting the dip and strike of the bedding plane and the trend of the lineation on a stereonet.
How to do it:
Plot the bedding plane's dip and strike as a large circle on the stereonet.
Place a line on the stereonet to represent the lineation's trend.
The lineation plunge is represented by the point where the lineation line and the bedding plane circle intersect.
In this instance, the lineation trends N60W, while the bedding plane descends 190/80. Plotting these on a stereonet and locating their junction would yield the plunge.
Be aware that a stereonet is a type of graph paper used specifically for mapping and analysing geological features including bedding planes and lineations.
learn more about plunge of a lineation at:
brainly.com/question/18556538
#SPJ4
An object is initially at rest and then accelerates for a time interval At. After At, the object has displaced 1.5 m in the +x-direction and has an instantaneous velocity of 3.5 m/s in the +x-direction. Using relevant expressions from the reading, determine: (a) The average acceleration of the object (b) The time it took the object to travel 1.5 meters (c) The average velocity of the object during this period of motion
a) Average acceleration of the object would be 3.5 m/s / At.
b) The time it took the object to travel 1.5 meters is (2 × distance / acceleration) ^(1/2).
c) The average velocity of the Object during this period of motion 1.5 m / time.
What is average velocity?Average velocity is a measure of the change in an object's position over a certain time period. It is calculated as the total distance traveled divided by the total time elapsed. Mathematically, it is represented as:
average velocity = (final position - initial position) / time interval
a) Average acceleration of the object can be determined using the equation:
average acceleration = change in velocity / time interval
Since the final velocity of the object is 3.5 m/s, and it was initially at rest (velocity = 0 m/s), the change in velocity is 3.5 m/s.
So,average acceleration = 3.5 m/s / At
b) The time it took the object to travel 1.5 meters can be determined using the equation:
distance = initial velocity * time + (1/2) * acceleration * time^2
Since the initial velocity was 0 m/s and the acceleration is the average acceleration determined in (a), we can rearrange the equation and solve for time:
time = (2 × distance / acceleration)^(1/2)
c) The average velocity of the Object during this period of motion can be determined using the equation:
average velocity = total distance traveled / total time elapsed
Since the object traveled a total distance of 1.5 meters and the time elapsed is the time determined in (b), we can calculate the average velocity:
average velocity = 1.5 m / time.
To know more about Average acceleration, visit:
https://brainly.com/question/27184422
#SPJ4
a planet orbits a star along an elliptical path, with the star at a focus of the ellipse. the planet's path can be modeled by the ellipse shown below, centered at the origin, with a horizontal major axis. if the minimum distance from the planet to the star is 70 million km and the maximum distance is 280 million km, write the equation of the ellipse (in millions of km).
Equation of the ellipse is x^2/a^2 + y^2/b^2 = 1
where an is the semi-major axis (the opposite half of the major axis) and b is the semi-minor axis (half of the minor axis).
The semi-major axis, which measures the distance from the planet's center to one of the foci, is the average of the minimum and maximum distances between the planet and the star:
(70 + 280)/2 = (175 million km)=a
The semi-major axis is equal to the square root of the product of the center-to-other-focus distance and the semi-major axis, divided by the difference between these two numbers:
105 million kilometers is equal to b = (a * 70 / (a - 70)) = 175 * 70.
Consequently, the orbital ellipse of the planet has the following equation:
x^2/175^2 + y^2/105^2 = 1
The ellipse describing the planet's orbit around the star has the following equation in millions of kilometers:
x^2/30,625 + y^2/11,025 = 1
Learn more about ellipse:
https://brainly.com/question/27759340
#SPJ4
A train travels a distance of 300 miles in 6 hours. What is the train's average speed?.
Answer:
50 mph
Explanation:
The average speed of an object can be calculated by dividing the total distance traveled by the total time taken.
Average speed = distance traveled / time taken
Average speed = 300 miles / 6 hours = 50 mph
a 40 n box is pulled up ramp at a constant speed. the ramp makes and angle of 37° to the horizontal. when the box has traveled 5 m, how much work will have been done by gravity?
Work will have been done by gravity is Ws=159.72 J
Given:
• The fore exerting on box is F=40 N.
• The distance covered by box is d=5 m.
• The angle to the horizontal is 0 = 37°.
The expression of work done by the gravity is given by,
WS=Fdcostheta
Substitute the values in the above expression.
Ws=(40 N) x (5 m) x cos37"
Ws=159.72 J
The product of a force's component acting in the displacement's direction and its magnitude is known as the work done by the force.
When an object is moved over a distance by an external force, at least a portion of that force must be applied in the direction of the displacement. This is known as work in physics.
Learn more about work done:
brainly.com/question/25573309
#SPJ4
standard blueprint plans and elevations are generally drawn in is______projection.
Standard blueprint plans and elevations are generally drawn in orthographic projection.
Orthographic projection is a way of creating 2D representations of 3D objects by projecting their lines and shapes onto a flat surface. In this type of projection, parallel lines in the object remain parallel in the projection and perpendicular lines appear as perpendicular. It is used in engineering, technical drawings, and computer graphics as it provides a clear and accurate representation of the object. The final image is a combination of multiple views taken from different angles, which can be combined to create a 3D representation of the object. Orthographic projections are essential for visualizing and understanding the shape and form of objects, especially in the design and construction industries.
Learn more about Project:
brainly.com/question/19569405
#SPJ4
investigating the relationship between the vertical deflection of the cantilever and the distance at which the external force is applied on the cantilever uwc maastricht
The vertical deflection of a cantilever is the amount of bending or deformation experienced by the structure when an external force is applied to it. This external force could be due to a variety of reasons, such as a weight or a wind load.
The relationship between the vertical deflection of the cantilever and the distance at which the external force is applied is an important aspect of structural engineering and can be studied through mathematical models and simulations.
When an external force is applied to a cantilever, it creates a stress and a strain in the structure. The vertical deflection is a result of the strain experienced by the cantilever, which is proportional to the stress experienced by the structure.
The relationship between the vertical deflection and the distance at which the external force is applied is given by the equation of the beam, which can be derived using mathematical models such as the Euler-Bernoulli beam theory.
One of the key factors that affects the vertical deflection of a cantilever is the location of the external force. The farther away the external force is from the fixed end of the cantilever, the less the deflection will be. Conversely, the closer the external force is to the fixed end, the greater the deflection will be.
In conclusion, the relationship between the vertical deflection of a cantilever and the distance at which the external force is applied is an important aspect of structural engineering.
to know more about vertical deflection refer here
https://brainly.com/question/14897214#
#SPJ11
Find the amount of work W_ABCDA done by the electrostatic force on the charged particle as it moves from A to B to C to D to A.
W = - F electrostatic. dr is the amount of work done by the electrostatic force on a charged particle, where F electrostatic is the electrostatic force acting on the particle and dr is the particle's displacement.
In this case, the particle moves from point A to point B to point C to point D to point A. To determine the total work done by the electrostatic force, we must calculate and add the work done during each segment of the displacement.
W_AB = - ∫F_electrostatic.dr from A to B
W_BC = - ∫F_electrostatic.dr from B to C
W_CD = - ∫F_electrostatic.dr from C to D
W_DA = - ∫F_electrostatic.dr from D to A
W ABCDA = W AB + W BC + W CD + W DA is the total work done by the electrostatic force. The electrostatic force is assumed to be constant along the particle's path in this equation. However, if the magnitude or strength of the electric field changes along the path, the equation becomes more complicated.
NOTE: W ABCDA cannot be calculated precisely without more information about the electrostatic force acting on the particle and the path it takes from point A to point B to point C to point D and back to point A.
To Learn More About displacement click
https://brainly.com/question/19979064
#SPJ4
the magnitude of a force between two equal charges is 4 n when the charges are 2 m apart. what is the force between the charges if the distance between them is increased to 6 m?
The required value of force between the equal charges is calculated to be 0.44 N.
The relation between force, charges and distance is known to be
F = (k q₁ q₂)/r²
In this problem, the charges are said to be equal. So, q₁ = q₂.
Mathematical equation becomes, F₁ = k q²/r₁²
Force F₁ is given as, 4N
Distance between the charges r₁ = 2 m
Putting the values in the above equation, we have,
F₁ = k q²/r₁²
4 = k q²/4
So, k q² = 16
Now, r₂ is said to be increased to 6 m.
Let us find the force F₂.
F₂ = k q²/r₂²
Putting the known values, we have
F₂ = 16/36 = 0.44 N
Thus, the required force is calculated to be 0.44 N.
To know more about force:
https://brainly.com/question/12923370
#SPJ4
A bullet shot underwater will experience "viscous drag" and follow this velocity equation: v_x(t) = v_ie^-bt where v_i = 365 m/s and b = 0.42 s^-1. The bullet has an initial position x_i = 85.1 m at t_i = 0 s. What is the location of the bullet at time t = 0.87 seconds? What is the maximum position of the bullet (if you wait a long time, what will its position be)? What is the x component of the acceleration of the bullet 0.5 seconds after the bullet is fired?
The derivative of the velocity equation, a x(t), gives the x component of the bullet's acceleration 0.5 seconds after it is fired: a x(t) = -b * v x(t) = -b * v i * e-bt = -0.42 * 365 * e-0.5 * 0.42 m/s2.
The bullet is located at x(0.87) = x i + v i * (1 - e-bt) = 85.1 + 365 * (1 - e-0.87 * 0.42) m at time t = 0.87 seconds.
The bullet's maximum location is reached when the velocity equals zero, which happens when v x(t) = 0. We obtain t = -ln(v i/v x) / b after solving for t. When the numbers are substituted, the result is t = -ln(365/0)/0.42, which is undefined because the denominator is zero.
The derivative of the velocity equation, a x(t), gives the x component of the bullet's acceleration 0.5 seconds after it is fired: a x(t) = -b * v x(t) = -b * v i * e-bt = -0.42 * 365 * e-0.5 * 0.42 m/s2.
learn more about velocity here:
https://brainly.com/question/18084516
#SPJ4
two like charges are separated by some distance. describe quantitatively what will happen to the force exerted by one charge on the other if the distance between the charges is doubled. the force will become:
If the distance between the charges is doubled. the force will become 1/4 times.
Why do electrostatic forces exist?
Positive and negative charges are known to interact with one another. The magnitude of the electrostatic force, however, serves as a gauge for the strength of this interaction. The magnitude of the electric charges and the spacing between them both contribute to this force.
Between two charges that are separated by a distance, there is an electrostatic force. The size of each charge and the separation between them determine the strength of the electrostatic force.
F ∝ 1/r^2
F2= 1/4 xF1
As a result, the force between the charges decreases by a factor of 4 as the distance between them doubles.
To learn more about electromagnetic force use link below:
https://brainly.com/question/13745767
#SPJ4
Can you show me how to do this
Answer: C. 12
Weight= mass* gravity. Were going to have to do the inverse operation
Mass= weight/gravity^2. So were going to divide.
120/9.81 = 12.2324159021 or 12.
Explanation: Hope this helps!! :D Mark me Brainliest :D
use a dmm to measure the electrical resistance (in ohm’s, ) of a resistor. what happens if you reverse the leads?
When the lead locations of a multimeter are switched, the electrical resistance in a circuit alters.
By injecting a little voltage into the circuit and monitoring the current, a DMM ohmmeter measures the current. Due to the included diode junctions, semiconductors are polarity sensitive in their conductivity. The recorded voltage will simply change the sign if the leads are flipped when using a handheld voltmeter. For bench meters connected to lines, caution is required since it frequently happens that the negative terminal has been connected to earth ground. The terminals of meters should not be connected to ground or instrument enclosures since doing so may accidentally short-circuit components to the ground.
Learn more about electrical resistance:
https://brainly.com/question/29604143
#SPJ4
the test charge is launched from point x with an initial speed v0 and is observed to pass through point y. is the speed of the test charge at point y greater than, less than, or equal to v0? explain your reasoning.
It is impossible to determine the speed of the test charge at point y based solely on the information provided. The speed of the charge at point y could be greater than, less than, or equal to v0 depending on various factors such as the presence of electric or magnetic fields, resistance, or other forces that may have acted on the charge between points x and y. A detailed analysis of the situation taking into account all relevant factors would be required to determine the speed of the charge at point y.
About Speed ChargeSpeed Charge is a derived quantity derived from the principal quantities of length and time, where the formula for speed is distance divided by time. Velocity is a vector quantity that indicates how fast an object is moving. The magnitude of this vector is called speed and is expressed in meters per second.
Learn More About Formula Speed Charge at https://brainly.com/question/3004254
#SPJ4
in the human body when the triceps applies a force to the olecranon in extending the non-supported forearm at the elbow, it exemplifies: second-class levers. none of the answers are correct. first-class levers. third-class levers.
Option d. third-class levers. When the triceps applies a force to the olecranon in extending the non-supported forearm at the elbow, it exemplifies third-class levers.
In the human body, when the rear arm muscles applies a power to the olecranon in broadening the non-upheld lower arm at the elbow, it represents second rate class switches.
A second rate class switch is a switch framework where the work (the power applied by the rear arm muscles muscle) is situated between the heap (the heaviness of the lower arm) and the support (the elbow joint). In second rate class switches, the work is typically more prominent than the heap and the development is more slow contrasted with five star switches. Nonetheless, second rate class switches give a mechanical benefit, implying that a more modest power can be utilized to move a bigger burden.
To learn more about third-class levers, refer:
https://brainly.com/question/19732425
#SPJ4
The complete question is in the human body when the triceps applies a force to the olecranon in extending the non-supported forearm at the elbow, which of the following class levers:
a. second-class levers.
b. first-class levers.
c. none of the answer are correct.
d. third-class levers.
When 100hz oscillator is used to generate a sinusoidal wave on a string, the wavelength is 10cm. When tension of string is doubled the generator produces what frequency and wavelength? Please show work and explain
A new frequency of 200 Hz will be generated by the generator when the string's tension is doubled. The wavelength is 0.2 m.
Given:
Frequency, f = 100 Hz
Wavelength, 10 cm
From the wave equation for a string:
v = f × λ
v = (100 Hz) × (10 cm)
v = (100 Hz) × (0.10 m) = 10 m/s
When the tension is doubled, the new frequency is:
f' = 2 × 100 Hz
f' = 200 Hz
The new wavelength is:
2 × 0.1 = 0.2 m
Hence, the frequency is 200 Hz.
To learn more about frequency, here:
https://brainly.com/question/30783512
#SPJ12