The N-H bond is created when an sp3 orbital in N overlaps with a s orbital in H. The right response is number two. This is due to the four electron domains on the nitrogen atom in NH3, which combine to generate four sp3 orbitals.
The N-H bond is created when an sp3 orbital in N crosses a s orbital in H.
The nitrogen atom in NH3 has a tetrahedral geometry and four hybridised sp3 orbitals that hold its four valence electrons. The valence electron of a hydrogen atom is located in a s orbital. An s orbital from a hydrogen atom and a nitrogen atom's sp3 hybrid orbital overlap to create the N-H bond. The covalent link formed by the sharing of electrons between nitrogen and hydrogen is what causes this overlap. The orbital overlap that results in the creation of the N-H bond in NH3 is accurately described by Option 2.
learn more about nitrogen atom here:
https://brainly.com/question/2396742
#SPJ4
Below is the graph that the student attached to her report. NaOH HCI 26 25.5 24.5 p 24 23.5 23 22.5 22 21.5 10 Time (min) Let's think how we can use it to calculate the heat of neutralization reaction. Notice: In this experiment, the student measured the change in temperature not for the system itself but for the surroundings (solution). The solution is diluted and we can safely consider its specific heat and its density to be the same as for pure water: c 4.18 J/g-oCand d 1.00 g/cm3(a) What is the change in temperature recorded in this experiment? AT Did the system loose or gain energy in this experiment? Explain(b) Calculate how much heat (in joules) transferred between the system and the surroundings in this experiment.(c) Calculate the molar heat of the neutralization reaction (in kJ/mol) (d)Is the neutralization reaction endo or exothermic? Can you suggest one reason why this can be true?(d)Is the neutralization reaction endo or exothermic? Can you suggest one reason why this can be true?
The solution is diluted, and its specific heat and its density to be the same as for pure water:
(a) The change in temperature recorded in this experiment is AT = -1.5°C.
(b) The heat transferred between the system and the surroundings can be calculated using the formula Q = mcAT, where m is the mass of the solution, c is its specific heat capacity, and AT is the change in temperature.
Assuming that the solution has a mass of 100 g and a specific heat capacity of 4.18 J/g-°C, then the heat transferred is 100 x 4.18 x (-1.5) = -627 J.
(c) The molar heat of the neutralization reaction can be calculated using the formula q = -Q/n, where q is the molar heat, Q is the heat transferred, and n is the number of moles of the reaction.
Since 1 mole of HCl and 1 mole of NaOH are used in the reaction, n = 1. Thus, the molar heat of the neutralization reaction is -627/1 = -627 kJ/mol.
(d) The neutralization reaction is exothermic, as it releases energy in the form of heat.
This is due to the fact that the reaction between NaOH and HCl is highly energetically favorable, with the products having a lower energy than the reactants.
to know more about specific heat refer here:
https://brainly.com/question/11297584#
#SPJ11
What is the percentage by mass of hydrogen in glucose, C6H12O6?
Glucose has a molecular weight of 180.18 g/mol, while hydrogen has an atomic weight of 1.008 g/mol. As a result, glucose has a mass-based hydrogen content of around 7.48%.
With the molecular formula C6H12O6, or six carbon atoms, twelve hydrogen atoms, and six oxygen atoms, glucose is a simple sugar. The atomic weights of glucose's component atoms may be added to determine its molecular weight, which is 180.18 g/mol. We must ascertain the mass of the hydrogen atoms contained in one mole of glucose in order to calculate the proportion of hydrogen by mass in glucose. Twelve hydrogen atoms have a mass of 12.096 g/mol because their atomic weight is 1.008 g/mol. Hence, based on mass, glucose has a hydrogen concentration of approximately 7.48% (12.096/180.18 x 100%).
learn more about hydrogen here:
https://brainly.com/question/28937951
#SPJ4
arrange the amino acids coded for in the translation portion of the interactive in the correct order, starting with the first amino acid at the top.
The correct order of the amino acids in the translation portion is Methionine-Leucine-Histidine-Glycine-Glutamine-Threonine-Arginine, assuming Methionine is the first amino acid.
The order of amino acids in a polypeptide chain is determined by the sequence of codons in the mRNA transcript during the process of translation. The given sequence of amino acids: leucine, histidine, glycine, methionine, glutamine, threonine, and arginine, represents the sequence of amino acids coded for in the translation portion. The first amino acid is usually methionine, which serves as the start codon in most protein-coding genes. Thus, assuming methionine is the first amino acid, the correct order would be a methionine, leucine, histidine, glycine, glutamine, threonine, and arginine. This sequence of amino acids forms a polypeptide chain that would fold into a specific protein with a unique three-dimensional structure, which ultimately determines its function in the cell.
learn more about amino acids here:
https://brainly.com/question/14583479
#SPJ4
Match the following definitions to the most appropriate term: - a substance that donates one proton when dissolved in water [ Choose] - a substance that donates two protons when dissolved in water [ Choose ]- a substance that donates three protons when dissolved in water [Choose] - any ionic compound whose cation comes from a base and whose anion comes from an acid [Choose] - the solution in the buret [Choose] - the solution in the flask [Choose] [Choiose]:a. analyte b. diprotic acid c. salt d. triprotic acid e. monoprotic acid f. titrant
The correct matching is
a substance that donates one proton when dissolved in water - e. monoprotic acid
a substance that donates two protons when dissolved in water - b. diprotic acid
a substance that donates three protons when dissolved in water - d. triprotic acid
any ionic compound whose cation comes from a base and whose anion comes from an acid - c. salt
the solution in the buret - f. titrant
the solution in the flask - a. analyte
The term "monoprotic acid" is most appropriate for a substance that donates one proton when dissolved in water. A "diprotic acid" is a substance that donates two protons when dissolved in water. A "triprotic acid" is a substance that donates three protons when dissolved in water. Any ionic compound whose cation comes from a base and whose anion comes from an acid is called a "salt." The solution in the buret is called a "titrant." Finally, the solution in the flask is called an "analyte.
For more such questions on acid, click on:
https://brainly.com/question/25148363
#SPJ11
Give the electron geometry (eg), molecular geometry (mg), and hybridization for NH 3. a. eg = tetrahedral, mg = trigonal pyramidal, sp3 b. eg = trigonal pyramidal, mg = trigonal pyramidal, sp3 c. eg - trigonal planar, mg = trigonal planar, sp2 d. eg - trigonal pyramidal, mg - tetrahedral, sp3 e. eg = tetrahedral, mg - trigonal planar, sp2
The correct electron geometry (eg) and molecular geometry (mg) for [tex]NH_3[/tex] is a. eg = tetrahedral, mg = trigonal pyramidal, [tex]sp^3[/tex].
There are four electron regions around the central nitrogen atom, making a tetrahedral electron geometry, but because of the lone pairs of electrons, the molecular geometry is a trigonal pyramidal shape. The hybridization is [tex]sp^3[/tex], which means the orbitals used to form bonds and lone pairs are an s orbital and three p orbitals. Electron geometry shows the arrangement of electrons in space around the central atom, whereas molecular geometry shows the arrangement of atoms in a given molecule.Therefore,[tex]NH_3[/tex] have tetrahedral electron geometry, trigonal pyramidal molecular geometry and sp^3 hybridization.Learn more about electron geometry: https://brainly.com/question/7283835
#SPJ11
Arrange the following amines in order of decreasing base strength. Rank from strongest to weakest base. To rank items as equivalent, overlap them. View Available Hint(s) NH3 (CH3)2NH CH3NH NH,Br Strongest base Weakest base The correct ranking cannot be determined. Submit Previous Answers Request Answer
The amines should be ranked in the following order, decreasing base strength Strongest base: NH3 (ammonia), (CH3)2NH (dimethylamine), and CH3NH (Methylamine) -NH,Br The weakest base.
What is the ranking of acidity?Results for "rate the acids in decreasing acid strength" as an image.
When Cl's oxidation state in its oxyacid increases, so will the acidity of the solution. The highest level of Cl oxidation is found in HClO4, which is followed by HClO3, HClO2, and HClO.
Which acid is the most potent and acidic?For instance, the pH of pure sulfuric acid is a staggering -12, while that of nitric acid is 1.08 and hydrochloric acid is at 1.6. As a result, sulfuric acid is the strongest "normal" acid you will come across.
To know more about amines visit:-
https://brainly.com/question/30868298
#SPJ1
which process is necessarily driven by an increase in the entropy of the surroundings? the vaporization of water the freezing of water the sublimation of dry ice the melting of ice
The process that is necessarily driven by an increase in the entropy of the surroundings is the vaporization of water.
What is entropy?Entropy is a measure of the degree of disorder or randomness in a system. In a system, entropy can either remain unchanged, increase or decrease. It depends on the direction of the process. It is said that natural processes tend to go towards a state of maximum entropy or disorder. This is known as the second law of thermodynamics.
The process of vaporization of water is the process in which water changes its phase from liquid to gas, by the absorption of heat energy. In this process, the entropy of the system increases due to the production of a more random, disordered state. The entropy of the surroundings also increases. Hence, it is the process that is necessarily driven by an increase in the entropy of the surroundings.
Full task:
Which of the following processes is necessarily driven by an increase in the entropy of the surroundings?
The condensation of waterThe sublimation of dry iceThe freezing of waterLearn more about entropy: https://brainly.com/question/15402023
#SPJ11
Researchers separated fatty acid sodium salts from glycerol by adding HCl and then extracting with hexanes. Which statement correctly describes the extraction process?
A.HCl protonates the carboxylate, and the fatty acid is found in the aqueous layer.
B.The carboxyl group is deprotonated, and the fatty acid is dissolved in the polar solvent.
C.HCl protonates the carboxylate, and the fatty acid is found in the organic layer.
D.The carboxyl group is deprotonated, and the fatty acid is dissolved in the nonpolar solvent
The statement which describes the extraction process correctly is "HCl protonates the carboxylate, and the fatty acid is found in the organic layer." This lead to free acid formation. Thus, the correct option is C.
What is extraction of hexane?Researchers separated fatty acid sodium salts from glycerol by adding HCl and then extracting with hexanes. This is an acid-base extraction, which involves separating compounds based on their solubility differences. The extraction process can be explained as follows: When HCl is added to the mixture, it reacts with the fatty acid sodium salt to produce the corresponding fatty acid and sodium chloride.
The carboxylate group in the fatty acid sodium salt is protonated by HCl, making it more polar and water-soluble. As a result, the fatty acid is converted to its free acid form, which is insoluble in water but soluble in organic solvents like hexanes. Therefore, the fatty acid will move into the organic layer and can be extracted with hexanes. Thus, the correct statement that describes the extraction process is "HCl protonates the carboxylate, and the fatty acid is found in the organic layer."
Therefore, the correct option is C.
Learn more about Extraction process here:
https://brainly.com/question/28297691
#SPJ11
A mixture of 50 mol % benzene and 50 mol % toluene is distilled under exactly the same conditions as in Part a. Using Figure 4. 3, determine the distillation temperature and the percentage composition of the first few drops of distillate
The distillation temperature would be > 80 degrees. The composition of the few drops of the distillate would be 40℅ benzene and 60℅.
The boiling point of a liquid is the temperature at which the vapor pressure of the liquid, a pure compound, or a combination equals 1 atm.
We are aware that pure benzene has a boiling point of 80 °C.
Pure toluene has a boiling point of 106 °C.
As benzene has a lower boiling point than toluene, it distills first. Thus, the distillation temperature is greater than 80 °C.
The mixture contains 40 percent benzene and 60 percent toluene by percentage.
Distillation is a process used to separate components of a mixture based on differences in their boiling points. The mixture is heated to vaporize the components, and then the vapor is condensed back into a liquid form. The condensed liquid contains a higher concentration of the more volatile components with lower boiling points.
Distillation is widely used in various industries, including chemical, pharmaceutical, and food production, to purify substances, extract desired components, or separate different chemical compounds. For example, it can be used to purify water, extract essential oils from plants, or separate crude oil into different fractions such as gasoline, diesel, and kerosene.
To learn more about Distillation visit here:
brainly.com/question/29037176
#SPJ4
where is the equilibrium shifts when the concentration of h2(gas) is increased by adding more hydrogen gas to the container at constant temperature?
The equilibrium shift when the concentration of H2 (gas) is increased by adding more hydrogen gas to the container at constant temperature is towards the right side of the reaction equation.
Let us understand how the reaction shifts with the help of the following chemical reaction equation. N2(g) + 3H2(g) ⇌ 2NH3(g).
Adding more H2 gas to the container at constant temperature will increase the concentration of H2 gas.
The reaction will shift towards the product side (right side of the reaction equation) to balance the reaction equation.
The concentration of NH3 gas will increase, and the concentration of N2 gas and H2 gas will decrease.
The reaction quotient (Qc) is used to predict the direction of the reaction.
If Qc is greater than Kc, the reaction shifts towards the left side of the reaction equation.
If Qc is less than Kc, the reaction shifts towards the right side of the reaction equation.
.f Qc is equal to Kc, the reaction is at equilibrium state with no shift in the reaction.
For more information about equilibrium shift refer here
https://brainly.com/question/15164034?
#SPJ11
If 20 moles of fuel are combusted in C4H8 + 6 O2 -> 4 CO2 + 4 H2O, how many moles of O2 are consumed?
If moles of fuel (butene) are combusted in air, the number of moles of oxygen gas produced is 120 moles.
How to calculate moles using stoichiometry?Stoichiometry is the study and calculation of quantitative (measurable) relationships of the reactants and products in chemical reactions (chemical equations).
According to this question, 1 mole of butene reacts with 6 moles of oxygen gas to produce 4 moles of carbondioxide and 4 moles of water.
Based on the reaction, 1 mole of fuel reacts with 6 moles of oxygen gas.
This means that 20 moles of fuel will react with 120 moles of oxygen gas.
Learn more about stoichiometry at: https://brainly.com/question/9743981
#SPJ1
6.
P
If I have 2.9 L of H₂ at a temperature of 306K and a pressure of 1.02 atm, how many moles of
H₂ gas are present?
V
n
R
T
The number of moles of H₂ gas present in the container is 0.118 moles.
How to calculate number of moles?The number of moles of a gas can be calculated using the following formula:
PV = nRT
Where;
P = pressureV = volumen = no of molesR = gas law constantT = temperatureAccording to this question, 2.9L of H₂ at a temperature of 306K and a pressure of 1.02 atm. The number of moles can be calculated as follows:
1.02 × 2.9 = n × 0.0821 × 306
2.958 = 25.1226n
n = 2.958/25.1226
n = 0.118 moles
Learn more about moles at: https://brainly.com/question/26416088
#SPJ1
Identify the major mechanistic pathway when 1-chloropentane is treated with KCN.a. E1
b. E2
c.SN1
d. SN2
The major mechanistic pathway when 1-chloropentane is treated with KCN is [tex]SN^2[/tex]. So, the correct option is d.
A mechanistic pathway is the sequence of steps that leads to the formation of a specific product from the reactants.
The mechanism of a chemical reaction is typically portrayed using chemical equations and mathematical models.
The [tex]SN^2[/tex] mechanism is the primary mechanistic pathway when 1-chloropentane is treated with KCN.
In an [tex]SN^2[/tex] mechanism, the nucleophile competes with the leaving group in a concerted step in the formation of a new bond. This mechanism is common in primary halides with excellent leaving groups, and the reaction rate is largely determined by the nucleophile's concentration and accessibility.
The term "SN" refers to the nucleophilic substitution reaction in organic chemistry. It stands for "Substitution Nucleophilic."
The [tex]SN^1, SN^2, E1[/tex], and E2 mechanisms are four common mechanisms in organic chemistry. The SN^1 mechanism is a two-step reaction, with the leaving group first leaving, leaving a carbocation intermediate, which is then attacked by a nucleophile.
The elimination reaction that follows the SN1 reaction mechanism is E1.
The elimination reaction that follows the [tex]SN^2[/tex] reaction mechanism is E2. Therefore, the correct option is d.
Learn more about Substitution Nucleophilic reaction mechanism: https://brainly.com/question/30631335
#SPJ11
determine the enthalpy change when 18.6 g of carbon is reacted with oxygen according to the reaction: c(s) o2 (g) --> co2 (g) the change in enthalpy for this reaction is -349 kj/mol.
The enthalpy change when 18.6 g of carbon is reacted with oxygen according to the reaction: c(s) + O2 (g) --> CO2 (g) is -349 kJ/mol. This enthalpy change is referred to as the heat of reaction, or enthalpy of reaction, and can be calculated using the enthalpy of formation of each reactant and product in the reaction.
The enthalpy of formation for carbon is given as +716 kJ/mol and for oxygen it is given as 0 kJ/mol. The enthalpy of formation for CO2 is given as -393.5 kJ/mol. Using Hess’s law, we can calculate the enthalpy of reaction using the following equation: ΔHreaction = (ΔHformation CO2) - (ΔHformation C + ΔHformation O2)
Using the values for the enthalpies of formation for the reactants and products, the enthalpy of reaction can be calculated as follows: ΔHreaction = (-393.5) - (716 + 0) = -349 kJ/mol.This is the same enthalpy change as given in the question.
In conclusion, the enthalpy change when 18.6 g of carbon is reacted with oxygen according to the reaction: c(s) + O2 (g) --> CO2 (g) is -349 kJ/mol.
Know more about enthalpy change here:
https://brainly.com/question/29556033
#SPJ11
The grades on a chemistry exam have an approximately normal distribution with a mean of 78 and a standard deviation of 5. Willa scores a 74.8 on the exam. What proportion of the students scored higher than her on the exam?
A. .9987
B. .64
C. .74
D. .26
The proportion of students that scored higher than Willa is 1 - 0.2626 = 0.7374 or approximately 0.74.
C. 0.74 is correct option.
The grades on a chemistry exam have an approximately normal distribution with a mean of 78 and a standard deviation of 5. Willa scores a 74.8 on the exam. What proportion of the students scored higher than her on the exam?
The proportion of students who scored higher than Willa on the exam can be found using the normal distribution table. Given the mean, μ = 78, and the standard deviation, σ = 5, the distribution of the scores is approximately normal.
Let's first standardize Willa's score. Standardized Score = Z-score.
The formula for Z-score is as follows:
Z = (X - μ) / σ
where, X is the raw score
μ is the mean, and
σ is the standard deviation.
Z = (74.8 - 78) / 5Z
= -0.64
Using the standard normal distribution table, we can find the proportion of students that scored higher than Willa. The area to the left of Willa's Z-score is 0.2626.
for such more question on proportion
https://brainly.com/question/24155045
#SPJ11
What happens to the atomic number of an element when γ-radiation, is emitted?it deacrease by 1it increase by 1it decrease by 2it remains the same
The last solution is the correct answer to this question. The atomic number of an element remains the same when γ-radiation is emitted.
Gamma radiation (γ-radiation) is a form of electromagnetic radiation that does not carry any charge or atomic mass. Therefore, it does not directly affect the atomic number (Z) or mass number (A) of an atom.
The atomic number of an element represents the number of protons in the nucleus of an atom. When a radioactive decay occurs, the nucleus of the atom changes, which may result in a change in the number of protons. However, γ-radiation is not a type of radioactive decay that results in a change in the number of protons or atomic number of an element.
Learn more about Gamma radiation here brainly.com/question/9815840
#SPJ4
There are ________ mol of carbon atoms in 4 mol of C4H8O2
There are 16 mol of carbon atoms in 4 mol of C4H8O2
The chemical formula C4H8O2 tells us that each molecule of this compound contains 4 carbon atoms, 8 hydrogen atoms, and 2 oxygen atoms. Therefore, to determine the number of carbon atoms in 4 mol of C4H8O2, we need to multiply the number of moles by the number of carbon atoms per molecule:
Number of carbon atoms = number of moles × number of carbon atoms per molecule
Number of carbon atoms = 4 mol × 4 carbon atoms per molecule
Number of carbon atoms = 16 mol
So there are 16 mol of carbon atoms in 4 mol of C4H8O2. It's important to note that the chemical formula of a compound gives us information about the ratio of atoms in the compound, which allows us to determine the number of atoms in a given amount of the compound.
To know more about the Carbon, here
https://brainly.com/question/30282405
#SPJ4
When oxygen is available, sulfur dioxide is produced from the burning of sulfur. Which of the following word equations best represents this reaction? a. sulfur dioxide + oxygen sulfur dioxide b. sulfur + oxygen → sulfur dioxide c. sulfur dioxide → sulfur + oxygen d. sulfur → sulfur dioxide + oxygen
The correct answer is (b). The following word equation best represents this reaction: sulfur + oxygen → sulfur dioxide.
Sulfur dioxide (SO2) is produced when sulfur is burned in oxygen. The chemical reaction that occurs is:
S(s) + O2(g) → SO2(g)
This equation represents the burning of sulfur to produce sulfur dioxide in the presence of oxygen. Sulfur, when burned in the presence of oxygen, produces sulfur dioxide. In this chemical reaction, sulfur (S) reacts with oxygen (O2) to form sulfur dioxide (SO2). The reaction is exothermic, which means that it releases heat.
Sulfur dioxide is a major air pollutant and has significant impacts on human health. However, it also has immense importance in laboratories. It is used for the manufacture of sulphuric acid and is also used as a preservative.
In summary, the correct option is B, which is sulfur + oxygen → sulfur dioxide.
To know more about sulfur dioxide, refer here:
https://brainly.com/question/9720549#
#SPJ11
The correct word equation that represents the production of sulfur dioxide from the burning of sulfur in the presence of oxygen is **option b**: sulfur + oxygen → sulfur dioxide.
When sulfur is burned in the presence of oxygen, it undergoes a chemical reaction known as combustion. During this process, sulfur reacts with oxygen to form sulfur dioxide. The equation can be balanced as follows:
[tex]Sulfur (S) + Oxygen (O2) → Sulfur Dioxide (SO2)[/tex]
In this equation, sulfur and oxygen are the reactants, while sulfur dioxide is the product. It is important to note that the coefficients (numbers in front of the chemical formulas) should be adjusted to balance the equation, ensuring that the number of atoms on both sides is equal.
Learn more about sulfur dioxide here:
https://brainly.com/question/31142164
#SPJ11
describe what happens to plane-polarized light when it passes through a solution of an optically active compound
When plane-polarized light passes through a solution of an optically active compound, it rotates the plane of polarization of the light. This phenomenon is referred to as optical rotation or rotary dispersion.
How does optical rotation occur?When a beam of unpolarized light passes through a solution of an optically active substance, its plane of polarization is rotated by an angle called the optical rotation angle. Optical activity is a property of a molecule's three-dimensional structure, which is why some molecules are optically active while others are not. The two isomers of a chiral molecule are enantiomers, which means they have the same physical and chemical properties but are mirror images of each other.
The optical rotation angle of each enantiomer is equal in magnitude but opposite in sign to that of the other enantiomer. When a racemic mixture of equal quantities of both enantiomers is studied, no optical rotation is observed. Because the rotations induced by each enantiomer cancel out. When plane-polarized light passes through a solution of an optically active compound, it rotates the plane of polarization of the light. This phenomenon is referred to as optical rotation or rotary dispersion. Optical rotation is defined as the rotation of the plane of polarization of linearly polarized light as it passes through a sample. The angle of rotation is determined by the molecular structure of the sample and the concentration of the sample in solution.
Learn more about Optical rotation here:
https://brainly.com/question/30669570
#SPJ11
An element has an electron configuration of [Ar]4s^2 3d^10 4p^5. Which of the following is/are TRUE about the element? Select ALL statements that are true about the element. a. The element is Se. b. The element is a halogen c. The element has one fewer electron than the following noble gas. d. When the element reacts with a metal, the elements tends to gain one electron to form an anion with a 1-charge.
An element with an electron configuration of [Ar]4s²3d¹⁰4p⁵ is Bromine(Br). The statements that are true about the element are B, C, and D.
A. The element is Bromine(Br). Bromine is a nonmetal and belongs to the family of elements called halogens, which is group 17. It is situated in period four of the periodic table. The electron configuration of Se is [Ar]4s²3d¹⁰4p⁵, which shows that it contains seven valence electrons.
Therefore, the statement "The element is Se" is incorrect.
B. Br is a halogen because it belongs to group 17, and all halogens possess a similar electron configuration, which is ns²np. Therefore, the element is a halogen and the statement is true.
C. Br has one less electron than the previous noble gas (Krypton) because Br has 35 electrons, whereas Kr has 36 electrons. So the statement "The element has one fewer electron than the following noble gas" is true.
D. The tendency of the element Br to gain one electron when it reacts with the metal to form a negatively charged ion is due to its valence electron configuration. Because Br contains seven valence electrons, it prefers to gain 1 electron and form an anion with a -1 charge. Therefore statement D is also true.
Overall, All the statements are TRUE except for statement A.
To know more about Bromine(Br), refer here:
https://brainly.com/question/29028678#
#SPJ11
where and when in which state is gold found in nature
notable states in the United States where gold is found include California, Alaska, Colorado, Nevada, and South Dakota.
when:(gold rushes)
California (1848-1855)
Colorado (1858-1861)
Alaska (1896-1899)
South Dakota (1874-1877)
Georgia (1828-1849)
Montana (1862-1864)
Nevada (1859-1864)
Oregon (1851-1861)
North Carolina (1799-1848)
Predict the organic starting material needed to prepare the following product upon treatment with warm hydrochloric acid. CI Cl 석C HCI 40 *C H,C CH HC
Vinyl chloride (CH2=CHCl) is most likely the initial substance required to prepare the product after treatment with heated hydrochloric acid. A hydrochlorination procedure creates 1,2-dichloroethane as a byproduct by adding HCl across the vinyl chloride double bond.
Alkenes frequently undergo the hydrochlorination process, in which HCl is added across the double bond to produce a chloroalkane byproduct. In this instance, a vinyl chloride, which possesses a double bond between the carbon and chlorine atoms, is most likely the beginning substance. Warm HCl fractures the double bond, allowing the H and Cl atoms to add across the carbon atoms to create 1,2-dichloroethane as a byproduct. This response can be modelled as:
CH2 = CHCl + HCl ClCH2CH2Cl
All in all, this is a straightforward reaction that can be performed on a small scale in a lab or on a larger scale in industry to make 1,2-dichloroethane, which is utilised as a solvent and in the creation of vinyl chloride monomer.
learn more about hydrochloric acid here:
https://brainly.com/question/15231576
#SPJ4
Select an INCORRECT expression about a first-order reaction of A→2P. Note: k is rate constant, [A]0 is initial reactant concentration. A) Rate Law for this reaction: Rate=k[ A] B) For rates of concentration changes: −2Δ[A]/t=Δ[P]/t C) Reactant half-life (t1/2)=0.693/k D) For Product Concentration: [P]=[A]0−[A]0exp(−kt) A B C D
Option C is incorrect as it does not use the correct equation to calculate the half-life of a first-order reaction.
The correct answer is C. The reactant half-life of a first-order reaction is not equal to 0.693/k, as expressed in option C.
The equation for the half-life of a first-order reaction is: t1/2 = 0.693/k[A]0, where k is the rate constant and [A]0 is the initial reactant concentration.
To understand why this equation is correct, we need to understand how the half-life of a reaction is calculated. The half-life of a reaction is defined as the time taken for the concentration of a reactant to be halved.
This means that after a period of time, the concentration of the reactant will be equal to half of its initial concentration.
We can calculate this time using the equation for the reaction rate law: rate = k[A]0. By rearranging this equation and solving for t, we get t = 0.693/k[A]0.
This equation is known as the integrated rate law and is used to calculate the half-life of a first-order reaction.
Therefore, option C is incorrect as it does not use the correct equation to calculate the half-life of a first-order reaction. The correct options are A, B, and D.
Option A states that the rate law for this reaction is rate = k[A]0. Option B states that for rates of concentration changes, the equation is -2Δ[A]/t = Δ[P]/t,
where Δ[A] and Δ[P] are changes in the concentrations of the reactant and product, respectively.
Option D states that for product concentration, the equation is [P] = [A]0 - [A]0exp(-kt), which is correct.
to know more about half-life refer here:
https://brainly.com/question/24710827#
#SPJ11
What is the total volume of gaseous products formed when 119 liters of carbon monoxide react completely according to the following reaction? (All gases are at the same temperature and pressure.) carbon monoxide (g) + water(l>carbon dioxide (g) + hydrogen(g) _________ liters products
To find the volume of gaseous products formed in the given reaction, we have to balance the chemical equation and then use the balanced chemical equation to solve the question.
The balanced chemical equation of the given reaction is as follows:
CO (g) + H2O (l) → CO2 (g) + H2 (g)
Now, we need to determine the mole ratios of reactants and products:
1 mole of CO reacts with 1 mole of H2O to produce 1 mole of CO2 and 1 mole of H2.
As given, we have 119 liters of CO, we need to calculate the amount of H2O required to react with 119 liters of CO:
1 mole of CO occupies 22.4 L at STP.
Therefore, 119 L of CO contains 119/22.4 = 5.31 moles of CO.
From the balanced chemical equation, we can see that 1 mole of CO reacts with 1 mole of H2O.
Therefore, 5.31 moles of CO will react with 5.31 moles of H2O.
So, the volume of H2O required to react with 119 L of CO can be calculated as follows:
5.31 moles of H2O occupy 5.31 × 18 L = 95.58 L
Now, we have the volume of H2O required to react with 119 L of CO.
We know that, at the same temperature and pressure, the volume of the gaseous product is directly proportional to the number of moles of the gaseous product.
So, the volume of gaseous products formed in the given reaction can be calculated as follows:
1 mole of CO2 occupies 22.4 L at STP.
Therefore, 5.31 moles of CO2 will occupy 5.31 × 22.4 L = 119.2 L
1 mole of H2 occupies 22.4 L at STP.
Therefore, 5.31 moles of H2 will occupy 5.31 × 22.4 L = 119.2 L
Therefore, the total volume of gaseous products formed in the given reaction is 119.2 L. Answer: 119.2
to know more about chemical balance refer here:
https://brainly.com/question/28294176#
#SPJ11
determine the enthalpy change when 18.6 g of carbon is reacted with oxygen according to the reaction: c(s) o2 (g) --> co2 (g) the change in enthalpy for this reaction is -349 kj/mol.
The enthalpy change when 18.6 g of carbon is reacted with oxygen according to the equation C(s) + O2(g) → CO2(g) is -540.6 kJ.
From the equation, the mole ratio of carbon to carbon dioxide is 1:1. Therefore, the number of moles of carbon reacted can be determined as follows:
Mass of carbon = 18.6 g
Molar mass of carbon = 12.01 g/mol
Number of moles of carbon = (18.6 g)/(12.01 g/mol) = 1.549 moles
Since the change in enthalpy for the reaction is given as -349 kJ/mol, we can calculate the enthalpy change for the given mass of carbon as follows: Enthalpy change = Number of moles of carbon × Change in enthalpy. Enthalpy change = 1.549 moles × (-349 kJ/mol).Enthalpy change = -540.6 kJ (rounded off to two significant figures)Therefore, the enthalpy change when 18.6 g of carbon is reacted with oxygen according to the given equation is -540.6 kJ.
More on enthalpy change: https://brainly.com/question/17056641
#SPJ11
Under what conditions of temperature and pressure do real gases behave most like ideal gases?
1) high temperature and high pressure
2) high temperature and low pressure
3) low temperature and high pressure
4) low temperature and low pressure
Real gases behave most like ideal gases under conditions of high temperature and low pressure. Option 2 is correct.
This is because at high temperatures, the kinetic energy of gas molecules increases, causing them to move faster and collide more frequently, which reduces the intermolecular forces between the gas molecules. At low pressures, the gas molecules are farther apart and the intermolecular forces are weaker, allowing the gas molecules to move more freely and behave more like an ideal gas.
At high pressures and low temperatures, the gas molecules are closer together and the intermolecular forces are stronger, causing deviations from ideal gas behavior. Hence the correct option is 2.
To know more about ideal gas, here
brainly.com/question/28257995
#SPJ4
What do an engine using gasoline to power a car and
mixing glue and laundry powder to create putty have in commen
An engine using gasoline to power a car and mixing glue and laundry powder to create putty are both examples of chemical reactions.
Gasoline is considered an energy source due to its ability to release stored chemical energy in the form of heat and mechanical work when it is burned in an engine. When gasoline is ignited in an engine, the chemical energy stored in its molecular bonds is released, causing a rapid combustion reaction that generates heat and expanding gases that push the pistons and create mechanical work.
The energy content of gasoline is typically measured in units of joules or British thermal units (BTUs), which are used to quantify the amount of energy released during combustion. Gasoline is a widely used and important energy source, but its combustion also produces harmful emissions that contribute to air pollution and climate change.
To learn more about Gasoline visit here:
brainly.com/question/29991915
#SPJ4
True or False , cations are smaller and anions larger than their parent atoms. ionic radius increases down a group. across a period, ionic radii generally decrease, but a large increase occurs from the last cation to the first anion.
Cations are smaller and anions larger than their parent atoms. ionic radius increases down a group. across a period, ionic radii generally decrease, but a large increase occurs from the last cation to the first anion.Therefore, the given statement is true.
True. Cations are smaller than their parent atoms because they have fewer electrons and therefore a smaller electron cloud. Anions are larger than their parent atoms because they have more electrons and therefore a larger electron cloud.
Ionic radius increases down a group because the additional electron is added to a larger atomic radius. Across a period, ionic radii generally decrease due to the increased nuclear charge and electrons being pulled in closer to the nucleus. However, a large increase occurs from the last cation to the first anion because the added electron is going into an empty orbital, thus increasing the size of the ion.
for such more question on cation
https://brainly.com/question/14309645
#SPJ11
What is/are the spectator ion(s) for the reaction of perchloric acid with sodium hydroxide? Select ALL of the spectator ions from the list below.a. Na+b. CO2c. O2d. Cl-
The spectator ions for the reaction of perchloric acid with sodium hydroxide are Na+ and Cl-.The spectator ions are those ions that are present on both sides of the chemical equation but do not participate in the reaction.
These ions do not change their oxidation state or form new compounds. Therefore, they are considered to be spectators and are excluded from the overall ionic equation. The equation for the reaction of perchloric acid with sodium hydroxide is:HClO4 + NaOH → NaClO4 + H2O. Sodium ions and chloride ions are the spectator ions in this reaction. Sodium ions (Na+) are present on both sides of the equation, and they do not participate in any chemical reaction.
They remain in the same oxidation state and do not form any new compound. Hence, Na+ ions are spectator ions in this reaction. Similarly, the chloride ions (Cl-) are also present on both sides of the equation and are not involved in any reaction. Therefore, they are also spectator ions.
In summary, the spectator ions for the reaction of perchloric acid with sodium hydroxide are Na+ and Cl-. These ions are present on both sides of the equation but do not participate in any chemical reaction. They are considered spectators and are excluded from the overall ionic equation.
Know more about oxidation state here:
https://brainly.com/question/17161178
#SPJ11
what is the difference between a polyprotic acid and a monoprotic acid?
A monoprotic acid only has one acidic proton per molecule, but a polyprotic acid can donate numerous protons per molecule and possesses more than one acidic proton.
The capacity of an acid to contribute protons (H+ ions) determines its strength. Each acidic proton in a polyprotic acid becomes tougher to remove as each donation results in a greater loss of negative charge. Hence, polyprotic acids are susceptible to partial or whole dissociation reactions and can have a variety of dissociation constants (Ka values). Phosphoric acid (H3PO4) and sulfuric acid are examples of polyprotic acids (H2SO4).
Monoprotic acids, on the other hand, only have one acidic hydrogen atom per molecule, which can give one proton. For monoprotic acids, the dissociation reaction is complete and can be described by a single dissociation constant (Ka). Acetic acid and hydrochloric acid (HCl) are examples of monoprotic acids (CH3COOH).
learn more about polyprotic acid here:
https://brainly.com/question/29993754
#SPJ4