Answer:
crystallization
Explanation:
When 490g of sugar is dissolved completely in water at a high temperature ( 100°C ) and the solution is been cooled to a lower temperature ( 20°C ), The dissolved sugar in the solution will start to crystallize, This is because the solubility of sugar in water decreases with a decrease in temperature of water.
How many sugar molecules are present in 300 mL of a 2.0 M solution? (The formula for sugar is C12H22O11) AND ADD STEPS PLEASE
Answer: 3.6 x 1023 molecules and 0.143 Litres
12.0 g NaHSO4 (MM: 120.1 g/mol) is dissolved in water to make a 2.00 L solution. What is the molarity of the resulting NaHSO4 solution?
Answer:
0.05 M
Explanation:
First we convert 12 g of NaHSO₄ into moles, using the given molar mass:
12 g NaHSO₄ ÷ 120.1 g/mol = 0.10 mol NaHSO₄We can now calculate the molarity of the resulting solution, using the calculated number of moles and the given volume:
Molarity = moles / litersMolarity = 0.10 mol / 2.00 L = 0.05 MAnswer:
The molarity of the resulting NaHSO₄ solution is 0.05 [tex]\frac{moles}{liter}[/tex]
Explanation:
Molarity or Molar Concentration is the number of moles of solute that are dissolved in a certain volume.
The molarity of a solution is calculated by dividing the moles of the solute by the volume of the solution:
[tex]Molarity=\frac{moles of solute}{volume}[/tex]
Molarity is expressed in units [tex]\frac{moles}{liter}[/tex].
Molar mass is the amount of mass that a substance contains in one mole. Being the molar mass of the compound NaHSO₄ equal to 120.1 g/mole, then the number of moles that 12 grams contain is calculated by:
[tex]12 g*\frac{1 mole}{120.1 g} = 0.1 moles[/tex]
And being 2 L the volume of the solution, then replacing in the definition of molarity you get:
[tex]Molarity=\frac{0.1 moles}{2 L}[/tex]
Molarity= 0.05 [tex]\frac{moles}{liter}[/tex]
The molarity of the resulting NaHSO₄ solution is 0.05 [tex]\frac{moles}{liter}[/tex]
iron and carbon:steel:copper and tin:___________
Answer:
iron and carbon:steel:copper and tin: metal
Please help this is due soon and I’ll mark you brainiest if you can help
Answer:
I think it's either A or D I'm not sure hope that I helped you.
!!!PLEASE HELP!!!
3. If a convergent boundary involves a continental landmass and an ocean basin, what is the result?
A: A chain of volcanic mountains will form on the edge of the continent or just off shore, a deep
ocean trench will form off shore.
B: The land will fold and fault, forming high mountain ranges.
C: The land
at the edge of the continent will buckle, causing the formation of a trench.
D: There will be frequent earthquakes, but no other evidence of crustal movement.
Answer:
A
Explanation:
If a convergent boundary involves a continental landmass and an ocean basin, a subduction zone forms. Subduction occurs where a plate moves underneath the other.
The table below shows a list of radioisotopes and their half-lives.
A 2-columns table with 10 rows. Column 1 is labeled radioisotope. Column 2 is labeled half-life. Lithium-5, 3 times 10 to the negative 22 seconds; polonium-211, 0.516 seconds; Barium-139, 82.7 minutes; uranium-240, 14.1 hours; Bismuth-210, 5.012 days; uranium 232, 68.9 years; carbon-14, 5730 years; plutonium-239, 24,065 years; beryllium-10, 1.6 times 10 to the 5 years; uranium-238, 4.5 times 10 to the 9 years.
The radioisotope that has the longest half-life is the best to use in powering planet and space exploration vehicles because they can travel farther. Which radioisotope is the best to use?
lithium-5
uranium-240
carbon-14
plutonium-239
good answer and you get brainliest
Answer: D: plutonium-239
Explanation: Got it right on the quiz
The table below shows a list of radioisotopes and their half-lives.
A 2-columns table with 10 rows. Column 1 is labeled radioisotope. Column 2 is labeled half-life. Lithium-5, 3 × 10⁻²² seconds; polonium-211, 0.516 seconds; Barium-139, 82.7 minutes; uranium-240, 14.1 hours; Bismuth-210, 5.012 days; uranium 232, 68.9 years; carbon-14, 5730 years; plutonium-239, 24,065 years; beryllium-10, 1.6 × 10⁵ years; uranium-238, 4.5 times 10 to the 9 years.
The radioisotope that has the longest half-life is the best to use in powering planet and space exploration vehicles because they can travel farther. The radioisotope is the best to use is:
d) plutonium-239
Plutonium-239 has the longest half-life of all the radioisotopes listed, at 24,065 years. This means that it will take 24,065 years for half of the plutonium-239 in a sample to decay. This makes it a good choice for powering planet and space exploration vehicles because it will last for a long time.
The other radioisotopes listed have much shorter half-lives. Lithium-5 has a half-life of 3 × 10⁻²² seconds, polonium-211 has a half-life of 0.516 seconds, barium-139 has a half-life of 82.7 minutes, uranium-240 has a half-life of 14.1 hours, bismuth-210 has a half-life of 5.012 days, uranium-232 has a half-life of 68.9 years, carbon-14 has a half-life of 5,730 years, and beryllium-10 has a half-life of 1.6 × 10⁵ years.
So, the best radioisotope to use for powering planet and space exploration vehicles is plutonium-239. It has the longest half-life, which means that it will last for a long time and provide a steady source of power.
To know more about radioisotopes here
https://brainly.com/question/28142049
#SPJ2
help!! help!! help!! help!! help!! help!! help!! help!! help!! explain the bond formation of ocl2 molecule
Answer:
it is formed by covalent bonds. the oxygen atom shares one elctron with each chlorine atom, forming single covalent bonds ( cl — o — cl )
Which equation is correctly balanced?
A) CaO + 2H2O + Ca(OH)2
B) NH3 + 202 → HNO3 + H20
C) Ca(OH)2 + 2H3PO4 → Ca3(PO4)2 + 3H2O
D) Cu + H2SO4 → CuSO4 + H2O + SO2
CaO + 2H2O + Ca(OH)2 is a balance chemical equation. Therefore, option A is correct.
What is balance chemical equation ?A balanced chemical equation is one that has the same number of atoms of each type in the reaction on both the reactant and product sides. In a balanced chemical equation, both the mass and the change are equal.
When a chemical reaction occurs, the mass of the products should be equal to the mass of the reactants, according to the law of conservation of mass. As a result, the number of atoms in each element remains constant during the chemical reaction. As a result, the chemical equation must be corrected.
The chemical equation is said to be balanced if there are no inequalities. Every element in this example now has an equal number of atoms on both the reactant and product sides.
Thus, option A is correct.
To learn more about balance chemical equation, follow the link;
https://brainly.com/question/28294176
#SPJ2
I’ll mark BRAINLIEST! Please help!
Answer:
theirs nothing there?!!!??!?!?!??!!?!?!?!?!??!?!??!?!?!??!?!
Explanation:
whys it just a blank picture
SHOW WORK
A sample of gas at 62.0°C occupies a volume of 4.80 L at a pressure of 2.90 atm. How many moles of gas are contained in the sample?
A sample of gas at 62.0°C occupies a volume of 4.80 L at a pressure of 2.90 atm. 0.506 moles of gas are contained in the sample.
What is mole?Inside the World System of Units, the mole is indeed the unit of substance amount (SI). How many fundamental entities of a particular substance are present in an object and sample is determined by the quantity of that material. There are precisely 6.022×10²³ elementary entities in a mole.
An elementary entity can be an atoms, a molecule, an ion, and ion pair, or a fundamental particle like an electron depending upon what the substance is. For instance, although having differing volumes and masses, 10 moles liquid water as well as ten moles of mercury both contain the same quantity of material, as well as the mercury includes exactly one atom with each molecule of water.
PV = nRT
n = PV/RT
P = 2.90 atm
V = 4.80 L
R = 0.08206 L atm / mol K
T = 62.0 + 273 = 335 K
n = (2.90 •4.80) / (0.08206 • 335)
= 0.506 moles of gas
Therefore, 0.506 moles of gas are contained in the sample.
To know more about mole, here:
https://brainly.com/question/15209553
#SPJ3
How many moles of sulfuric acid (H2SO4) are present in 500.0 mL of 0.15 M H2SO4 solution?
Answer:
Number of moles = 0.075 mol
Explanation:
Volume = 500.0 mL = 0.5 (Converting to L by dividing by 1000)
Molarity = 0.15 M
Number of moles = ?
The relationship between the quantities is given as;
Molarity = Number of moles / Volume
Number of moles = Molarity * Volume
Number of moles = 0.15 * 0.5
Number of moles = 0.075 mol
HELP !!! urgent
which one is oxidized ?
lead (II) oxide + carbon monoxide= lead + carbon dioxide
Answer:
carbon monoxide (CO)
Explanation:
carbon monoxide (CO) is oxidized because it gains oxygen to turn to carbon dioxide (CO2)
Yoyoyoyoyoyoyo
Yoyoyoyoyoyoyoyo
sorry but you are ;silly. adjective. showing that you are not intelligent, not serious, not thinking carefully etc.
idiotic. adjective.
unintelligent. adjective. not intelligent.
simple-minded. adjective. ...
slow-witted. adjective. ...
slow. adjective. ...
brainless. adjective. ...
thick. adjective.
And you can learn a lot more! Upload another question and feel free to not be so, ummaculate
Help!!!
Is KOH soluble or insoluble in water?
Insoluble
Soluble
Answer: yes, it's soluble in water.
help help help help help
Answer:
Temporary hardness is a type of water hardness caused by the presence of dissolved bicarbonate minerals (calcium bicarbonate and magnesium bicarbonate). ... However, unlike the permanent hardness caused by sulfate and chloride compounds, this "temporary" hardness can be reduced by boiling the water.
How man atoms of Mg are in the following equation:
(Mg3 N2)4
there are 12 atoms of mg in the following equations
Answer:
[tex]\boxed {\boxed {\sf 12 \ Mg \ atoms }}[/tex]
Explanation:
We are given this formula:
[tex](Mg_3N_2)_4[/tex]
We want to find the number of magnesium atoms. We can see that there is a subscript of 3 after the magnesium, so there are 3 magnesium atoms in 1 molecule of the compound.
However, there is a subscript of 4 that comes after the entire compound, so there are actually 4 molecules, with each molecule containing 3 magnesium atoms. Multiply 4 and 3.
3 Mg * 4 = 12 MgThere are 12 magnesium atoms.
A bulb is added to a circuit. When you place your hand near the bulb, it feels warm. The bulb in the circuit would most accurately identified as a..
A) conductor
B) load
C) energy source
D) insulator
Answer:
C energy source
Explanation:
I got this right
Answer:
c
Explanation:
Which of the following is matter in its solid form?
HURRY FAST
Answer:
what are the awnser choices
Which statement correctly describes the relationship between air temperature and air pressure?
-Warm air rises, creating an area of low pressure.
-Cool air sinks, creating an area of low pressure.
-Warm air sinks, creating an area of low pressure.
-Cool air rises, creating an area of low pressure.
Answer:
-Warm air sinks, creating an area of low pressure.
Explanation:
Heat will weigh more, than cool air!
In the atmosphere, it is more common to find two oxygen molecules joined together than to find a single atom of oxygen. Why? What would that molecule look like? What would this molecule be called?
Answer:
See explanation
Explanation:
Oxygen has six electrons in its outermost shell. This means that its octet can be completed when it shares two electrons with another oxygen atom.
In a covalent bond, each bonding atom contributes one electron to the bond. This means that four electrons are shared between two oxygen atoms. Each atom contributes a total of two electrons which are shared. This molecule of oxygen satisfies the octet rule rather than a single atom of oxygen.
An image of the oxygen molecule is attached to this answer.
This system of two oxygen atoms joined together in a covalent bond is called an oxygen molecule(O2).
Nitrogen dioxide (NO2) gas and liquid water (H20) react to form
aqueous nitric acid (HNO3) and nitrogen monoxide (NO) gas. Suppose you have 1.0 mol of NO, and 7.0 mol of H, 0
olle
Calculate the largest amount of HNO, that could be produced. Round your answer to the nearest 0.1 mol.
in a reactor.
Imo1
x
?
briskly meaning
thankew 人(◕ᴗ◕✿)❤️
to all who liked my answers
plsssssssssss flw
can anyone pls flw me who aren't flwing
plsssssssssss answer fast
Answer:
You need follower?
See it shows this in Laptop
I can't see who I am following it does itself
1.25 x 10^25 atoms of magnesium = ? moles of magnesium
5g of NaOH was dissolved in 1000cm3. 25cm3 of this solution neutralized 28.3cm3 of solution containing 7.2gdm-3 of impure H2SO4. Calculate I. The molarity of H2SO4 II. The concentration of the pure acid on gdm-3 III. % impurity of the acid
Explanation:
The balanced equation for the reaction between NaOH and H2SO4 is given as;
2NaOH + H2SO4 → Na2SO4 + 2H2O
2 mol of NaOH reacts with 1 mol of H2SO4
5g of NaOH was dissolved in 1000cm3.
Mass = 5 g
Molar mass = 40 g/mol
Volume = 1000 cm3 = 1 L
Number of moles = Mass / Molar mass
Number of moles = 5 / 40 = 0.125 mol
Molarity = Number of moles / Volume
Molarity = 0.125 / 1 = 0.125 M
25cm3 of this solution neutralized 28.3cm3 of solution containing 7.2gdm-3 of impure H2SO4.
CaVa / CbVb = Na / Nb ; where a = acid and b = base
Va = 28.3cm3
Vb = 25cm3
Ca = ?
Cb = 0.125 M
Na = 1
Nb = 2
I. The molarity of H2SO4
Solving for Ca;
Ca = CbVb * Na / (Va * Nb)
Cb = (0.125 * 25 * 1 ) / ( 28.3 * 2)
Cb = 0.0552 M
II. The concentration of the pure acid on gdm-3
Molarity = Mass conc / Molar mass
Mass Conc = Molarity * Molar mass
Mass Conc = 0.0552 * 98.079
Mass Conc = 5.41 g/dm3
III. % impurity of the acid
Percentage Impurity = Mass of pure / Mass of Impure * 100
Percentage Impurity = 5..41 / 7.2 * 100
Percentage Impurity = 75.14%
At 25◦C a 4 L sample of H2 exerts a pressure of 5 atm. What pressure would the same sample exert in a 2 L container at 25◦C?
Answer:
10 atm.
Explanation:
Using the combined gas law equation as follows;
P1V1/T1 = P2V2/T2
Where;
P1 = initial pressure (atm)
P2 = final pressure (atm)
V1 = initial volume (L)
V2 = final volume (L)
T1 = initial temperature (K)
T2 = final temperature (K)
According to the information provided in this question,
P1 = 5 atm
P2 = ?
V1 = 4L
V2 = 2L
T1 = 25°C = 25 + 273 = 298K
T2 = 25°C = 298K
Using P1V1/T1 = P2V2/T2
5 × 4/298 = P2 × 2/298
20/298 = 2P2/298
Cross multiply
298 × 20 = 298 × 2P2
5960 = 596P2
P2 = 5960 ÷ 596
P2 = 10 atm.
differentiate between hypothesis and Theory
Answer:
A
Explanation:
edge
How many liters of Carbon Tetra Oxide gas in 152.0 grams?
Answer:
Hello
so ur answer is
56.74L
Explanation:
thanks... hope it helps
potassium hydroxide , sodium chloride, sodium hydroxide ,calcium chloride , sodium bicarbonate write molecular formula
✧ [tex] \underline{ \underline{ \large{ \tt{A \: N \:S \: W \: E \: R}}}} : [/tex]
[tex] \underline{ \underline{ \large{ \text{Molecular \: Formulaes}}}} : [/tex]
⇾ [tex] \large{ \text{Potassium \: Hydroxide : K \: OH}}[/tex]
⇾ [tex] \large{ \text{Sodium \: Chloride : NaCl}}[/tex]
⇾ [tex] \large{ \text{Sodium \: Hydroxide : NaOH}}[/tex]
⇾ [tex] \large{ \text{Calcium \: Chloride : CaCl}}[/tex]
⇾ [tex] \large{ \text{Sodium \: Bicarbonate} : \tt{Na ( HCO)_{ 3} }}[/tex]
---------------------------------------------------------
☥ [tex] \underline{ \underline{ \large{ \tt{ \: E \: X\: P \: L\: A\: N \: A \: T \: I \: O \: N}}} }: [/tex]
[tex] \underline{ \underline{ \text{Writing \: a \: molecular \: formula}}} : [/tex]
To write a molecular formula , the following steps are usually adopted only when we know the symbol and valencies of elements and radicals present in a molecule.
Step 1 : First , the name of the compound is written.
Step 2 : The symbols of basic and acidic radicals are written side by side.
Step 3 : The valency of each radical is written at the right upper corner of the symbol. The valency of one radical is transferred to another radical and it is written on the right hand side at the bottom corner. If necessary , L.C.M of the valencies us taken to get a simple whole number.
Step 4 : If a compound radical takes part in the molecular formula , the radical is enclosed in brackets and the valency number is written on the right side of the bracket at the bottom of the formula.
For instance :
[tex] \text{Calcium \: \: \: \: \: \: Sulphate}[/tex] [ compound ]
1. [tex] \sf{Ca \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: SO_{4} }[/tex] [ Symbol of basic and acidic radicals ]
2.We know : Valencies of calcium and sulphate are 2 and 2 respectively
3. [tex] \sf{Ca_{2} \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: (SO_{4} )_{2} }[/tex] [ Valencies are exchanged and compound radical is enclosed in bracket ]
4.[tex] \sf{CaSO_{4}}[/tex] [ L.C.M is taken to get molecular formula of calcium sulphate ]
Hope I helped ! ♡
Have a wonderful day / night ! ツ
☄ Let me know if you have any questions regarding my answer !
☥ [tex] \underline{ \underline{ \mathfrak{Carry \: On \: Learning}}}[/tex] !! ✎
▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁
SCIENCE QUEASTION I PUTED IT IN CHEMISTRY BECAUSE BRAINLY HAS NO SCIENCE WILL MARK BRAINLIEST DONT POST LINKS OR ELSE REPORTED
Pls Help With these 2
#1 Which description most accurately describes what weather is?
The long term average of temperatures at a location
or
The condition of the atmosphere at a certain time and certain place
#2 When air reaches 100% relative humidity or the point of saturation, what does that mean? *
The rate of evaporation is GREATER THAN the rate of condensation
or
The rate of evaporation is EQUAL to the rate of condensation
DONT POST LINKS
Gave you the answers already but anyways good luck, do well :)
Which of the following statements is true about the molecule shown below?
Answer:
B. The bonds are polar and the molecule is nonpolar.
Explanation:
Each bond in the molecule is polar, as indicated by the partial charges on the atoms of the molecule. However, the four atoms are arranged symmetrically around the central atom. In this case, the effects of the partial charges on opposite sides cancel out. As a result, the molecule as a whole is nonpolar. If exposed to an electric field, the molecule will not orient itself in any particular direction.