What mass of NaOH would need to be dissolved in 500.0 mL of water to produce a solution with a pH of 12.40

Answer:

1.2 L

Explanation:

Step 1: Write the balanced equation

Mg + 2 HCl ⇒ MgCl₂ + H₂

Step 2: Calculate the moles corresponding to 2.3 g of Mg

The molar mass of Mg is 24.31 g/mol.

2.3 g × 1 mol/24.31 g = 0.095 mol

Step 3: Calculate the moles of H₂ produced

0.095 mol Mg × 1 mol H₂/1 mol Mg = 0.095 mol H₂

Step 4: Calculate the volume occupied by the hydrogen

We will use the ideal gas equation.

P × V = n × R × T

V = n × R × T/P

V = 0.095 mol × (0.0821 atm.L/mol.K) × 298 K/2 atm = 1.2 L

Answer:

[Ag+] = [NO3-] = 0.700M

0.555M = [Na+] = [I-]

Explanation:

To solve this question we need to find the moles of sodium iodide, NaI, using its molar mass -. With the moles and the volume we can find the molarity of Na+ and I-. The molarity of the ions of silver nitrate, AgNO3 doesn't change because we are assuming the volume doesn't change:

Molarity Ag⁺ = Molarity NO₃⁻ = 0.700M

Moles NaI -Molar mass: 149.89g/mol-

20.8g NaI * (1mol/149.89g) = 0.0139 moles NaI

Molarity:

0.0139 moles NaI / 0.250L = 0.555M = [Na+] = [I-]

There are 3.43 × [tex]10^{56}[/tex] atom will be present in 5.70 x [tex]10^{32}[/tex] mol of Rn.

The basic number of matter that may be broken even without producing electrically charged molecules is the atom.

Calculation of atom:

It is given that number of mol = 5.70 x [tex]10^{32}[/tex] mol.

Then, the number of atom = 5.70 x [tex]10^{32}[/tex] mol × 6.02 × [tex]10^{23}[/tex].= 3.43 × [tex]10^{56}[/tex] atom.

Therefore, there are 3.43 × [tex]10^{56}[/tex] atom will be present in 5.70 x [tex]10^{32}[/tex] mol of Rn.

To know more about atom.

https://brainly.com/question/1566330

#SPJ3

Answer:

It would take 200,000 years for a spaceship traveling at the speed of light to go across the entire galaxy.

Answer:

Pressure increases

Explanation:

Boyle's law states that; '' the volume of a given mass of ideal gas is inversely proportional to its pressure at constant temperature.

Hence, when the volume of a given mass of ideal gas is decreased, the molecules of the gas come closer together so they collide with each other and the walls of the container more frequently.

This implies that the pressure of the gas increases as volume decreases in accordance with Boyle's law.

The question is incomplete, the complete question is shown in the image attached

Answer:

A and B

Explanation:

The electrophilic substitution of arenes yields a cation intermediate. The positive charge of the cation is delocalized over the entire ring.

The -CN group directs incoming electrophiles to the ortho/para position. The resonance structures for the chlorination of benzonitrile are shown in the question.

Recall that -CN is an electron withdrawing group. The resonance forms that destablize the carbocation intermediate are those in which the -CN group is directly attached to the carbon atom bearing the positive charge as in structures A and B.

Answer:

9.5x10¹⁷ s

Explanation:

First we convert 3.41 cubic micrometers (um³) to liters (L), as such:

With the converted rate of 3.41x10⁻¹⁵ L/min, we can calculate how many minutes it would take to fill a 54 L vessel:

Finally we convert 1.58x10¹⁶ minutes to seconds:

Answer:

218.7 mL

Explanation:

The reaction that takes place is:

First we calculate how many HCOOH moles reacted, using the given volume and concentration:

As 1 HCOOH mol reacts with 1 LiOH mol, 32.8 mmoles of LiOH are needed to react with 32.8 mmoles of HCOOH.

Finally we calculate how many mL of a 0.150 M solution would contain 32.8 mmoles:

Answer:

A) habitat

Explanation:

a habitat is essentially the organisms "home". also known as a "niche"

Answer:

2700 kg/m³

Explanation:

First let's convert 2.7 g/cm³ to kg/cm³, keeping in mind that 1 kilogram equals 1000 grams:

Finally we need to convert 0.0027 kg/cm³ to kg/m³, keeping in mind that 1 meter equals 100 centimeters, as follows:

The answer is 2700 kg/m³.

Answer:

10mL

Explanation:

Using the formula as follows:

CaVa = CbVb

Where;

Ca = concentration of acid, HBr (M)

Cb = concentration of base, Sr(OH)2 (M)

Va = volume of acid, HBr (Litres)

Vb = volume of base, Sr(OH)2 (Litres)

According to the information given in this question;

Ca = 0.24M

Cb = 0.24M

Va = ?

Vb = 10.0ml

Using CaVa = CbVb

0.24 × Va = 0.24 × 10

0.24Va = 2.4

Va = 2.4 ÷ 0.24

Va = 10mL

10mL of HBr is needed.

Answer:

3.36 grams Al°(s)  

Explanation:

Given AlCl₃(s), determine the mass (grams) of Al°(s) produced from electrolysis of Aluminum Chloride at 10.0 amps for 1.00 hour.

AlCl₃(s) + 378.3°F (=192.4°C) => Al⁺³(l) + 3Cl⁻(l)

formula wt. Al° = 27g/mol

Faraday Constant (F°) = 96,500 amp·sec

? grams Al°(s) = 10.0amps x (1 mole e⁻/96,500amp-sec) x (1 mole Al°(s)/3 mole e⁻) x (27g Al°(s)/1 mole Al°(s)) x 3,600 sec = 3.36 grams Al°(s)

The 3.36 grams of aluminum are produced in 1 hour by the electrolysis of molten AlCl₃ when 10A current is passed.

Electrolysis is a process that uses an electrical current to break chemical compounds. The electric current is passed through the substance to bring the chemical change by gain or loss of electrons.

The electrolysis of the aluminum chloride in the molten state is represented as:

AlCl₃  →   Al³⁺    +  3Cl⁻

At cathode:   Al³⁺  +  3e⁻  →  Al (s)

Given,  the current. I = 10 A and  t = 1 hr = 3600 s

We know that the current is calculated from the equation:  I = q/t

q = I× t

q = (10A) × (3600s)

q = 36 × 10³ C

We know, 96500 C of the charge has electrons = 1 mol

36 × 10³ C of the charge has electrons  = 0.373 mol

3 moles of electrons required to produce aluminum = 1 mol

0.373 mol of electrons will produce aluminum = 0.373/3 = 0.124 mol

We know that, the mass of one mole of Al = 27g

The mass of 0.124 mol of Al = 27 × 0.124 = 3.36 g

Therefore, the aluminum produced in 1 hour by the electrolysis of molten AlCl₃ is equal to 3.36 grams.

Learn more about electrolysis, here:

https://brainly.com/question/12054569

#SPJ5

Answer:

Equlibrium concentration for each species ae as follows:

[CO] = 0.043 mol/L

[Br₂] = 0.043 mol/L

[COBr₂] = 0.01 mol/L

Explanation:

Let take a look at the chemical equation taking place at equilibrium

COBr2(g) ⇄ CO(g) + Br2(g)

The concentration of COBr2 i.e.

[COBr2] = no of moles/volume

= 0.50 mol/9.50 L

[COBr2] = 0.0530 mol/L

At standard conditions

Kc for COBr2 = 0.190

Now, the ICE table for the above reaction can be computed as follows:

                       COBr2(g)              ⇄       CO(g)         +           Br2(g)

Initial               0.053                                   0                           0

Change             -x                                       +x                          +x

Equilibrium     (0.053 - x)                              x                           x

[tex]\mathsf{K_c = \dfrac{[CO][Br_2]}{[COBr_2]}}[/tex]

[tex]K_c = \dfrac{(x) (x)}{(0,053 -x)}[/tex]

[tex]0.190= \dfrac{x^2}{(0.053 -x)}[/tex]

x² = 0.190(0.053 - x)

x² = 0.01007 - 0.190x

x² + 0.190x - 0.01007 = 0

Using quadratic formula:

x ≅ 0.043 mol/L

SInce: x = [CO][Br₂] = 0.043 mol/L

[COBr₂] = 0.053 - x

[COBr₂] = 0.053 - 0.043 mol/L

[COBr₂] = 0.01 mol/L

Answer:

Assign priorities in the following set of substituents according to Cahn-Ingold-Prelog rules.

-OCH3 -Br -Cl -CH2OH

Explanation:

To give priorities for the substituents that are attached to chiral carbon and  to assign either R or S-configuration the following rules were proposed:

1. The atom with the highest atomic number is given first priority.

2. If the Groups attached to chiral carbon are having the same first atom, then check for the atomic number of the second atom.

Among the given groups,

-Br has the highest atomic number, so it is given first priority.

Then, -Cl.

Then, -OCH3

and the last one is -CH2OH.

Hence, the order is :

BCAD.

Answer:

Tin + silver trioxonitrate V -------->Tin IV nitrate + silver

Explanation:

The term word equation refers to an equation in which the reactants and products are written in words rather than chemical symbols.

Note than tin is above silver in the electrochemical series hence silver will be displaced by tin as follows;

Tin + silver trioxonitrate V -------->Tin IV nitrate + silver

Answer:

True

Explanation:

The length of covalent bond depends upon the size of atoms and the bond order.

Answer:

0.377 J/gºC

Explanation:

From the question given above, the following data were obtained:

Mass of metal (Mₘ) = 65.3 g

Initial temperature of metal (Tₘ) = 99.8 °C

Mass of water (Mᵥᵥ) = 43.7 g

Initial temperature of water (Tᵥᵥ) = 25.7 °C

Equilibrium temperature (Tₑ) = 34.5 °C

Specific heat capacity of water (Cᵥᵥ) = 4.18 J/gºC

Specific heat capacity of metal (Cₘ) =?

The specific heat capacity of metal can be obtained as illustrated below:

Heat lost by metal = heat gained by water.

MₘCₘ(Tₘ – Tₑ) = MᵥᵥCᵥᵥ(Tₑ – Cᵥᵥ)

65.3 × Cₘ (99.8 – 34.5) = 43.7 × 4.18 (34.5 – 25.7)

65.3Cₘ × 65.3 = 182.666 × 8.8

4264.09Cₘ = 1607.4608

Divide both side by 4264.09

Cₘ = 1607.4608 / 4264.09

Cₘ = 0.377 J/gºC

Therefore the specific heat capacity of the metal is 0.377 J/gºC

Answer:

answer = 22.5m

Explanation:

using

[tex]s = \frac{ {v}^{2} - {4}^{2} }{2a} [/tex]

s= (0²-21²)/2(-9.8)

s= -441/19.6

s= 22.5m

do consider marking as Brainliest if this helped!!

Answer:

747.5 mL

Explanation:

Assuming ideal behaviour, we can solve this problem by using Boyle's law, which states that at constant temperature:

Where in this case:

We input the data given by the problem:

And solve for V₁:

Answer: The total partial pressure of the solution is 131.37 torr.

Explanation:

The number of moles is defined as the ratio of the mass of a substance to its molar mass. The equation used is:

[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex] ......(1)

Given mass of glucose = 46.8 g

Molar mass of glucose = 180 g/mol

Plugging values in equation 1:

[tex]\text{Moles of glucose}=\frac{46.8g}{180g/mol}=0.26 mol[/tex]

Given mass of methanol = 117 g

Molar mass of methanol = 32 g/mol

Plugging values in equation 1:

[tex]\text{Moles of methanol}=\frac{117g}{32g/mol}=3.66 mol[/tex]

Mole fraction is defined as the moles of a component present in the total moles of a solution. It is given by the equation:

[tex]\chi_A=\frac{n_A}{n_A+n_B}[/tex] .....(2)

where n is the number of moles

Putting values in equation 2:

[tex]\chi_{methanol}=\frac{3.66}{0.26+3.66}=0.934[/tex]

Raoult's law is the law used to calculate the partial pressure of the individual gases present in the mixture. The equation for Raoult's law follows:

[tex]p_A=\chi_A\times p_T[/tex] .....(3)

where [tex]p_A[/tex] is the partial pressure of component A in the mixture and [tex]p_T[/tex] is the total partial pressure of the mixture

We are given:

[tex]p_{methanol}=122.7torr\\\chi_{methanol}=0.934[/tex]

Putting values in equation 3, we get:

[tex]122.7torr=0.066\times p_T\\\\p_T=\frac{122.7torr}{0.934}=131.37torr[/tex]

Hence, the total partial pressure of the solution is 131.37 torr.

Answer:

See explanation

Explanation:

All molecules possess the London dispersion forces. However London dispersion forces is the only kind of intermolecular interaction that exists in nonpolar substances.

So, the only kind of intermolecular interaction that exists in dimethyl ether is London dispersion forces.

As for ethyl alcohol, the molecule is polar due to the presence of polar O-H bond. In addition to London dispersion forces, dipole-dipole interactions and specifically hydrogen bonding also occurs between the molecules.

Because ethyl alcohol is polar, it is more soluble in water than dimethyl ether.

Answer:

amount, pH value.

Explanation:

The buffer range is the pH range in which the buffer performs optimally, i.e., neutralizes even when a strong acid or base is introduced to it and resists any major change in its pH value.

The buffer capacity is the amount of acid or base that can be added before the pH of the buffer solution changes significantly.

Thus, the final statement becomes,

Buffer capacity is the amount of acid or base a buffer can handle before pushing the pH value outside of the buffer range.

Answer:

Amount

pH value

Buffer capacity is the amount  of acid or base a buffer can handle before pushing the pH  outside of the buffer range.

A buffer however consists of a weak acid and its conjugate base.Its major advantage is the ability to resist changes in pH when an acid or a base is added to the solution.

The human blood is also an example of a buffer solution as it is able to resist changes in pH when we eat or drink certain types of food.

An example of a buffer include acetic acid (HC₂H₃O₂) which is a weak acid and sodium acetate (NaC₂H₃O₂) which is a salt derived from that acid).

Read more on https://brainly.com/question/24188850

Answer:

SN1 mechanism

Explanation:

The mechanism of this reaction is shown in the image attached.

The Di- n- pentyl ether is first protonated. The CH3(CH2)4OH is now a good leaving group as shown.

The attack of the bromide ion on the cation formed completes the mechanism to yield 1- bromopentane as shown in the mechanism.

Answer:

less than 5 centimeters because it is a nonvascular plant

Explanation:

Mosses are a group of plants under the division Bryophyta. They are said to be the most primitive plant life in existence as they lack true roots, stems and leaves. They also lack vascular system, hence, they are regarded as non-vascular plants. They usually grow in very small sizes (about 0.2 - 10cm).

According to this question, Penny bought a club moss plant for her water garden and needs to know how tall the plant will grow so she know how much space it will need. Since it is a miss plant that lacks vascular tissues i.e. nonvascular, it will likely grow less than 5 centimeters in height.

Answer:

d

Explanation:

Answer:

Two

Explanation:

Lone pairs are electron pairs on an atom that resides only with one of the atoms in a molecule.

Dinitrogen pentaoxide is shown in the image attached. There are five oxygen atoms and two nitrogen atoms in the molecule. The molecule has a total of 40 valence electrons.

There are two electrons present on the central oxygen atom in the Lewis structure of dinitrogen pentaoxide as shown in the image attached.

Answer:

Throughout the explanations section below you will find a description of the question.

Explanation:

(1)

(2)

Answer: it will be basic

pH that ranges from 0-6 are acid

pH of EXACTLY 7 is neutral

pH greater than 7 are strongly basic or base

Answer:

the product and the reactant must be balanced

if u are required to give the mechanism if the reaction it must be written

Answer:

80.8%

Explanation:

Let's consider the following balanced equation.

4 Al(s) + 3 O₂(g) → 2 Al₂O₃(s)

The mass obtained of Al₂O₃ (experimental yield) is 84.0 g. The theoretical yield of Al₂O₃ is 104 g. We can calculate the percent yield of Al₂O₃ using the following expression.

%yield = (experimental yield / theoretical yield) × 100%

%yield = (84.0 g / 104 g) × 100% = 80.8%

Answer:

Percent Yield = 80.8%

Explanation:

We can find the percent yield of a reaction using the equation:

Percent yield = Actual yield (g) / Theoretical Yield (g) * 100

Where Actual yield is the amount of product produced (84.0g)

And theoretical yield is the mass produced assuming a 100% of product (104.0g)

Replacing the computed values:

Percent yield = 84.0g / 104.0g * 100

Percent Yield = 80.8%