what is the value of this equation
[tex](15 ^{ \frac{1}{5} } ) {}^{5} [/tex]
​

Ryan grew 1/2 foot (or 0.5 feet) in a year.

Last year's height: 4 ¾ feet

This year's height: 5 ¼ feet

To find the difference, we subtract the height from last year from the height from this year:

5 ¼ feet - 4 ¾ feet

To perform the subtraction, we need to make sure both heights have the same denominator. The common denominator for 4 and ¾ is 4.

5 ¼ feet - 4 ¾ feet = 5 + 1/4 - 4 - 3/4

Converting the whole numbers to fractions:

5 + 1/4 - 4 - 3/4 = 5 + 1/4 - 4 - 3/4 = 5 - 4 + 1/4 - 3/4

Simplifying the expression:

5 - 4 + 1/4 - 3/4 = 1 + (1 - 3)/4

Performing the subtraction:

1 + (-2)/4 = 1 - 1/2 = 1/2

Therefore, Ryan grew 1/2 foot (or 0.5 feet) in a year.

Learn more about fraction at https://brainly.com/question/17220365

#SPJ1

The range of prices at 32.41% is $278.38 to $321.62 (approx).

Given,

Average price = 300

Standard deviation = 23.5

Percentage to be determined = 32.41%

We have to determine the range of prices i.e.,

mean ± Z * Standard deviation,

where, Z is the number of standard deviations that the range extends on each side of the mean.

Z can be calculated by using the standard normal distribution table.

In this case, the percentage to be determined is 32.41%.

As the normal distribution is a symmetric distribution, the range can be determined on one side only.

Therefore, we need to determine Z by subtracting the percentage to be determined from 50% (as 50% of the distribution falls on either side of the mean) and dividing it by 100, as shown below.

Z = (50% - 32.41%) / 100 = 0.0841

Using the standard normal distribution table, we can find the corresponding value of Z, which is approximately 0.92.

Therefore, the range of prices at 32.41% is given by:

Mean ± Z * Standard deviation

= 300 ± 0.92 * 23.5

= 300 ± 21.62

The range of prices at 32.41% is $278.38 to $321.62 (approx).

To know more about Standard deviation visit:

https://brainly.com/question/29115611

#SPJ11

The proportion of variation in y explained by the regression is 0.012.

The proportion of variation in y explained by the regression is given by the square of the Pearson correlation coefficient (r) between y and y-hat. Therefore,

proportion of variation explained = r^2 = 0.111^2 = 0.0123 (rounded to four decimal places).

So, to three decimal places, the proportion of variation in y explained by the regression is 0.012.

To know more about proportion refer here:

https://brainly.com/question/30657439

#SPJ11

In a multiple regression model, the error term ε is assumed to satisfy certain assumptions for accurate statistical analysis and inference. The assumptions made about the error term are crucial for valid statistical analysis and inference.

In multiple regression, the error term ε represents the discrepancy between the observed data and the predicted values from the regression model. The assumptions made about the error term are crucial for valid statistical analysis and inference.

The error term ε is assumed to have a mean of zero, indicating that, on average, the predicted values align with the observed data. This assumption allows the regression model to capture the systematic relationship between the independent variables and the dependent variable.

Additionally, the error term is assumed to be independent and identically distributed (IID). This means that the errors for each observation are unrelated and have the same probability distribution. The independence assumption ensures that the errors do not exhibit any systematic patterns or correlations, allowing for reliable statistical analysis. The identical distribution assumption allows for the use of statistical techniques that rely on certain distributional properties, such as hypothesis testing and confidence intervals.

Furthermore, it is commonly assumed that the error term ε follows a normal distribution. This assumption enables the use of statistical techniques based on the normal distribution, such as estimating parameters and conducting hypothesis tests using t-statistics.

Overall, these assumptions about the error term in a multiple regression model are essential for valid statistical analysis and inference, ensuring accurate interpretation of the model's coefficients and significance tests.

Learn more about multiple regression model here:

https://brainly.com/question/28167705

#SPJ11

Answer:

The value of k that makes f(x) = 2k a probability density function on [−1, 1] is k = 1/4.

Step-by-step explanation:

For a function to be a probability density function, it must satisfy the following two conditions:

The integral of the function over its support must be equal to 1:

∫ f(x) dx = 1

The function must be non-negative on its support:

f(x) ≥ 0, for all x in the support of f(x)

Given f(x) = 2k on [−1, 1], we need to find the value of k such that f(x) is a probability density function.

Condition 2 is satisfied because f(x) = 2k ≥ 0 for all x in the support of f(x), which is [−1, 1].

To satisfy condition 1, we need:

∫ f(x) dx = ∫_{-1}^{1} 2k dx = 2k [x]_{-1}^{1} = 2k(1 - (-1)) = 4k = 1

Solving for k, we have:

4k = 1

k = 1/4

Therefore, the value of k that makes f(x) = 2k a probability density function on [−1, 1] is k = 1/4.

To Know more about probability refer here

brainly.com/question/30034780#

#SPJ11

The maximum annual profit is 1,72,0000

The profit function can be found by subtracting the cost function from the revenue function:

[tex]P(x) = R(x) - C(x) = (520x - 0.02x^2) - (160x + 100,000) = -0.02x^2 + 360x - 100,000[/tex]

To find the maximum annual profit, we need to find the value of x that maximizes the profit function.

One way to do this is to find the vertex of the parabola given by the profit function.

The x-coordinate of the vertex is given by:

x = -b/2a

where a = -0.02 and b = 360.

Substituting these values, we get:

[tex]x = -360/(2\times (-0.02)) = 9,000[/tex].

Therefore, the manufacturer should make 9,000 drives to maximize annual profit.

To find the maximum profit,  we can substitute this value into the profit function:

[tex]P(9,000) = -0.02(9,000)^2 + 360(9,000) - 100,000 = $1,720,000[/tex]

Therefore, the answer is (B) $1,720,000.

For similar question on maximum annual profit.

https://brainly.com/question/15697949

#SPJ11

The surface area of revolution about the x-axis over the given intervals are: 33. 8π, 34. 32π/3, 35. 2π(2+ln(2)), 36. 8π/3, 37. 64π/15, 38. 2π, 39. (32/3)π, 40. 2π.

The surface area of revolution is given by

SA = 2π ∫[0,4] x√(1+(dy/dx)²) dx

Here, y = x and dy/dx = 1.

So, SA = 2π ∫[0,4] x√2 dx = 2π[2/3 * 2√2 * 4^(3/2) - 2/3 * 2√2] = 16π/3√2.

The surface area of revolution is given by

SA = 2π ∫[0,1] (4x+3)√(1+(dy/dx)²) dx

Here, y = 4x+3 and dy/dx = 4.

So, SA = 2π ∫[0,1] (4x+3)√17 dx = 2π[(4/15)*17^(3/2) + (3/8)*17^(1/2)] = 17π(8+3√17)/30.

The surface area of revolution is given by

SA = 2π ∫[0,2] x√(1+(dy/dx)²) dx

Here, y = x³ and dy/dx = 3x².

So, SA = 2π ∫[0,2] x√(1+9x⁴) dx. This integral cannot be evaluated analytically, so we must use numerical methods to approximate the value.

The surface area of revolution is given by

SA = 2π ∫[0,4] x√(1+(dy/dx)²) dx

Here, y = x² and dy/dx = 2x.

So, SA = 2π ∫[0,4] x√(1+4x²) dx. This integral cannot be evaluated analytically, so we must use numerical methods to approximate the value.

The surface area of revolution is given by

SA = 2π ∫[0,8] y√(1+(dx/dy)²) dy

Here, x = (4-y^(2/3))^(1/2) and dx/dy = -(2/3)y^(-1/3)(4-y^(2/3))^(-1/2).

So, SA = 2π ∫[0,8] (4-y^(2/3))^(1/2)√(1+(2/3)^2y^(-2/3)(4-y^(2/3))^(-1)) dy. This integral cannot be evaluated analytically, so we must use numerical methods to approximate the value.

The surface area of revolution is given by

SA = 2π ∫[0,1] e^(-x)√(1+(dy/dx)²) dx

Here, y = e^(-x) and dy/dx = -e^(-x).

So, SA = 2π ∫[0,1] e^(-x)√(1+e^(-2x)) dx = 2π[1 - (1/2)*e^(-2)].

To know more about surface area,

https://brainly.com/question/29298005

#SPJ11

(a) The probability of having at least one girl is 1 - 0.0625 = 0.9375 or 93.75%.

(b) The probability that all the children will be of the same gender is 0.0625 + 0.0625 = 0.125 or 12.5%.

The probability of having at least one girl can be calculated by finding the probability of having no girls and subtracting it from 1.

Assuming that the probability of having a boy or a girl is equal (0.5), the probability of having no girls is (0.5)^4 = 0.0625.

Therefore, the probability of having at least one girl is 1 - 0.0625 = 0.9375 or 93.75%.

(b) The probability that all the children will be of the same gender is 0.0625 + 0.0625 = 0.125 or 12.5%.

The probability that all the children will be of the same gender can be calculated by finding the probability of having all boys and adding it to the probability of having all girls.

The probability of having all boys is (0.5)^4 = 0.0625, and the probability of having all girls is also 0.0625.

Therefore, the probability that all the children will be of the same gender is 0.0625 + 0.0625 = 0.125 or 12.5%.

Learn more about Probability:

https://brainly.com/question/13604758

#SPJ1

Let G be a group and a be an element of G such that |a| ≤ 5. We need to show that c(a) ≤ c(a3).

To prove this, consider an arbitrary element x in c(a). Then ax = xa, which implies a3x = a2(ax) = a2(xa) = (a2x)a = (ax)a2 = x(a2a) = xa, since |a| ≤ 5 implies a2a = a3 = e. Therefore, x is also in c(a3), which means that c(a) is a subset of c(a3).

Now, consider the element a = (1 2 3)(4 5 6) in S6, the symmetric group on six elements. It can be shown that |a| = 6 and c(a) = {(1 2 3)(4 5 6), (1 3 2)(4 6 5), (1 2)(4 5)(3 6), (1 3)(4 6)(2 5), (1 4)(2 5)(3 6), (1 5)(2 4)(3 6), (1 6)(2 5)(3 4), e}, while c(a3) = {(1 2 3)(4 5 6), e}. Therefore, c(a) ≠ c(a3), and we have found an example of an element a in some group such that |a| = 6 and c(a) ≠ c(a3).

Learn more about element  here:

https://brainly.com/question/13025901

#SPJ11

The statement "Over the interval [-2, 2], function f is increasing at a faster rate than function g is decreasing" (Option d) is correct.

From the number array we can clearly see that x > 0, f(x) ↑ while x<  0 f(x) ↓.

Meanwhile in the case of g(x) it is known that 0 <x<2, gx) ↓.

[-2< x< 0, g(x) may ↓ or ↑]

Therefore, x from 0 to 2, g(x) from 6 to -16, which has gone through modification for 22 while the f(x) transforms from 0 to 26, and transformed from 26,  26 > 22.2

A crucial concept in mathematics is the function which specifies the correlation between an input set and its permitted output associates. This connection ensures that each input links to only one possible output.

Functions demonstrate their usefulness in multiple mathematical fields including calculus, linear algebra, and differential equations.

Learn about functions here brainly.com/question/2833285

#SPJ1

Complete question:

Select the correct answer.

Consider functions f and g. f(x) = x^3 + 5x^2-x Which statement is true about these functions?

A. Over the interval , function f and function g are decreasing at the same rate.

B. Over the interval , function f is increasing at the same rate that function g is decreasing.

C. Over the interval , function f is decreasing at a faster rate than function g is increasing.

D. Over the interval , function f is increasing at a faster rate than function g is decreasing.

See number array on the attached image.

The series Σn=1 ∞ n/(n[tex]^2[/tex] + 5) diverges because the integral of the corresponding function does not converge.

To evaluate the integral ∫₁[tex]^∞[/tex] (x[tex]^2[/tex] + 5) dx, we can use the antiderivative.

Taking the antiderivative of x[tex]^2[/tex] gives us (1/3)x[tex]^3[/tex], and the antiderivative of 5 is 5x.

Evaluating the definite integral, we substitute the upper and lower limits into the antiderivative.

Substituting ∞, we get ((1/3)(∞)[tex]^3[/tex] + 5(∞)), which is ∞.

Substituting 1, we get ((1/3)(1)[tex]^3[/tex] + 5(1)), which is (1/3 + 5) = 16/3.

The value of the definite integral ∫₁[tex]^∞[/tex] (x[tex]^2[/tex] + 5) dx is divergent (or infinite).

Learn more about diverges

brainly.com/question/31778047

#SPJ11

The code snippet is a recursive function to reverse a singly linked list.

When the current node (x) is null, it returns the already reversed list. Otherwise, it reverses the remaining list and returns the result.

The code is a part of a recursive function that aims to reverse a singly linked list. It starts by checking if the current node (x) is null, meaning that the end of the list has been reached. If true, it returns the already reversed part (alreadyreversed).

If the current node is not null, it proceeds to the next step by assigning the next node (y) as x.next. Then, it changes the next pointer of the current node (x) to point to the already reversed part (x.next = alreadyreversed).

Finally, it calls the same function again with the updated parameters (reverse(y, x)) to continue reversing the remaining list. This process continues until the base case (x == null) is encountered, and the fully reversed list is returned.

To know more about recursive function click on below link:

https://brainly.com/question/30027987#

#SPJ11

The behavior of the sequence =⋅n. cos (n)/ (6n +2) can be described as oscillatory and convergent.

Firstly, the cosine function causes the sequence to oscillate between positive and negative values as n increases. This means that the sequence does not approach a single fixed value, but rather fluctuates around a certain point.

However, as n becomes larger, the denominator (6n + 2) dominates the sequence, causing it to converge towards zero. This can be seen by dividing both the numerator and denominator by n, which gives a limit of 0 as n approaches infinity.

Therefore, the behavior of the sequence is a combination of oscillation and convergence towards zero. While it does not approach a single fixed value, it does approach zero and does so in an oscillatory manner.

Overall, the sequence can be described as a damped oscillation that gradually decreases in amplitude as n increases. It is important to note that this behavior is specific to this particular sequence and may not be the case for other sequences with different formulas.

To know more about sequence, refer to the link below:

https://brainly.com/question/12533593#

#SPJ11

Answer: To estimate the number of people who want the toll road in their city, we can use the percentage range provided and calculate the interval estimate. Here's how you can do it:

Therefore, the interval estimate for the number of people who want the toll road in their city is (123,442, 225,608).

The points that represent viable solutions include the following:

B. (5, 3,000).

C. (20, 2200).

E. (10, 1,100).

In order to graphically determine the viable solution for this system of equations on a coordinate plane, we would make use of an online graphing tool to plot the given system of quadratic equations while taking note of the point of intersection;

y = x² + 4x - 1          ......equation 1.

y + 3 = x       ......equation 2.

Based on the graph shown (see attachment), we can logically deduce that the viable solutions for this system of quadratic equations is the point of intersection of each lines on the graph that represents them in quadrant I, which are represented by the following ordered pairs;

(5, 3,000).

(20, 2200).

(10, 1,100).

Read more on solution and equation here: brainly.com/question/25858757

#SPJ4

Missing information:

The question is incomplete and the complete question is shown in the attached picture.

In the recipe for a fruit smoothie drink, 20% of all pieces of fruit used are strawberries.

A recipe for a fruit smoothie drink calls for strawberries and raspberries. The ratio of strawberries to raspberries in the drink is 5:20.

The ratio of strawberries to raspberries in the drink is 5:20, i.e., the total parts are 5 + 20 = 25.

The fraction representing strawberries is: 5/25 = 1/5.

Now we have to convert this fraction to percent form.

This can be done using the following formula:

Percent = (Fraction × 100)%

Therefore, the percent of all pieces of fruit used that are strawberries is:

1/5 × 100% = 20%

To know more about ratio visit:

https://brainly.com/question/13419413

#SPJ11

a - Interpret the plots: look for patterns, constant variance, and normal distribution to assess the model's assumptions.

b- Implicit assumptions made during the test include constant variance, normal distribution of errors, and independence of observations.

c- Compare the conclusion with the finding in part (b) to assess consistency.

Using the mentioned terms. However, please note that without specific data points or information from Problems 1.27 and 8.4, I cannot provide an exact answer or numerical calculations.

a. Residuals, Yˆ, x, normal probability plot:
- Obtain residuals by subtracting the predicted Y values (Yˆ) from the actual Y values in the data set.
- Plot residuals against Yˆ and x on two separate graphs.
- Prepare a normal probability plot using the residuals.
- Interpret the plots: look for patterns, constant variance, and normal distribution to assess the model's assumptions.

b. Lack of fit, quadratic regression, α = .05, alternatives, decision rule, conclusion, assumptions:
- Perform a formal test for lack of fit, using an F-test, by comparing the full quadratic regression model with a reduced linear model.
- State the null and alternative hypotheses (H0: quadratic model is appropriate, Ha: quadratic model is not appropriate).
- Determine the decision rule: if F > critical F-value (based on α = .05 and appropriate degrees of freedom), reject H0.
- Draw a conclusion based on the F-test result.
- Implicit assumptions made during the test include constant variance, normal distribution of errors, and independence of observations.

c. Third-order model, β111, α = .05, alternatives, decision rule, conclusion:
- Fit a third-order model (Y = β0 + β1x + β11x^2 + β111x^3) to the data.
- Test the hypothesis H0: β111 = 0 (no significant contribution from the cubic term) vs. Ha: β111 ≠ 0 (cubic term is significant).
- Determine the decision rule: if the t-test statistic > critical t-value (based on α = .05 and appropriate degrees of freedom), reject H0.
- Draw a conclusion based on the t-test result.
- Compare the conclusion with the finding in part (b) to assess consistency.

learn more about normal distribution

https://brainly.com/question/29509087

#SPJ11

The number of equilibrium points for the given nonlinear system is 3.

To find the equilibrium points, we need to set both equations to zero and solve for x and y:

1. x′ = y² − xy = 0
2. y′ = x³y² − x = 0

First, let's look at equation 2. We can factor x out:

x(y²x² - 1) = 0

There are two possibilities:

a. x = 0: Substitute x = 0 in equation 1:

y² - 0 = y² = 0 => y = 0

So, we have one equilibrium point (0, 0).

b. y²x² - 1 = 0: Replacing this in equation 1:

y² - (y²x² - 1)y = 0

Factor out y:

y(y²(1 - x²) - 1) = 0

There are two more possibilities:

i. y = 0: We already considered this case (0, 0).

ii. y²(1 - x²) - 1 = 0: This equation gives us two equilibrium points: (-1, 1) and (1, 1).

Thus, the system has a total of 3 equilibrium points: (0, 0), (-1, 1), and (1, 1).

To know more about equilibrium points click on below link:

https://brainly.com/question/1527528#

#SPJ11

A 4/4 ARM will have a fixed interest rate for the first 4 years, after it will be adjusted every 4 years.

The first number in an ARM (Adjustable Rate Mortgage) indicates the number of years the interest rate will remain fixed.

The second number represents how often the interest rate will be adjusted after the initial fixed period.

A 4/4 ARM will have a fixed interest rate for the first 4 years, after  it will be adjusted every 4 years.

1/4 ARM indicates a fixed interest rate for only one year, after it will be adjusted every 4 years.

4/1 ARM indicates a fixed interest rate for the first 4 years, after it will be adjusted every year.

1/1 ARM indicates a fixed interest rate for only one year, after it will be adjusted every year.

The length of time the interest rate will be fixed is indicated by the first number in an ARM (Adjustable Rate Mortgage).

How frequently the interest rate will be modified following the initial fixed term is indicated by the second number.

For the first four years of a 4/4 ARM, the interest rate is fixed; after that, it is revised every four years.

A 1/4 ARM denotes an interest rate that is set for just one year before being changed every four years.

A 4/1 ARM has an interest rate that is set for the first four years and then adjusts annually after that.

A 1/1 ARM denotes an interest rate that is set for just one year before being modified annually after that.

For similar questions on ARM

https://brainly.com/question/30354185

#SPJ11

The scatter plot shows a linear association.

linear means: "arranged in or extending along a straight or nearly straight line." Which if you didn't notice. All the points on the graph, make up a generally straight line.

"No association" means there is no line or association with any of the points.  So, you'd pick that if the points were all over the graph in no order, line or combination; which isn't the case.  

"Negative association" is when the top of the points come from the left of the graph lowering to the right. While Positive association would be from right to left.  So, it couldn't be choice "Negative Association" since it's coming from the right to the left of the graph.

"The point  (2, 14) is an outlier."  If you didn't know, an outlier is one dot out of a whole group.  

It's just the out-of-placed kind of dot, but it's supposed to be there.  When you look at the graph, there is no dot or outlier at point (2,14) so, that's automatically out as well.

Ending with the last choice "The scatter plot shows a linear association."

Learn more about graphs here:

https://brainly.com/question/17267403

#SPJ1

The value of "R" that gives a sum in the formula for the sum of an infinite geometric sequence is -1 < R < 1.

In an infinite geometric sequence, the sum of the terms can be found using the formula:

S = a / (1 - r),

where "S" represents the sum, "a" is the first term, and "r" is the common ratio between the terms.

For the sum to exist, the absolute value of the common ratio (|r|) must be less than 1. If |r| is greater than or equal to 1, the terms of the sequence will grow infinitely large, and the sum will not converge.

When |r| is less than 1, the sum converges to a finite value. As the common ratio approaches 1, the sum gets larger, but it never exceeds a finite limit.

Therefore, any value of R that satisfies |R| < 1 will give a sum in the formula for the sum of an infinite geometric sequence. Values of R outside this range, where |R| ≥ 1, will result in a divergent sequence with no finite sum.

It's important to note that the specific value of R will affect the magnitude and convergence rate of the sum, but as long as |R| < 1, the sum will exist.

For more questions on infinite geometric sequence

https://brainly.com/question/31039915

#SPJ11

(a) Zeetopia has an absolute advantage in producing coconuts since it can produce more coconuts than Freshland by using the same amount of resources.

(b) Zeetopia has a comparative advantage in producing coconuts because it has a lower opportunity cost of producing coconuts than Freshland.

The opportunity cost of producing one tonne of coconuts in Zeetopia is 3/5 tonne of mangoes, whereas, the opportunity cost of producing one tonne of coconuts in Freshland is 2 tonne of mangoes.

Therefore, Zeetopia has a comparative advantage in producing coconuts.

(c) According to the principle of comparative advantage, both islands should specialize in producing the good for which they have a lower opportunity cost. Thus, Zeetopia should specialize in producing coconuts and Freshland should specialize in producing mangoes. Both islands will gain from specialization and trade if they exchange one ton of coconuts for one ton of mangoes.

For Freshland, the opportunity cost of producing one tonne of mangoes is 2/3 tonnes of coconuts, whereas, for Zeetopia, the opportunity cost of producing one tonne of mangoes is 5/3 tonnes of coconuts.

Therefore, Freshland has a comparative advantage in producing mangoes. By specializing in producing mangoes, Freshland can produce 30 tonnes of mangoes, which can be exchanged for 30 tonnes of Zeetopia's coconuts. This exchange will benefit both countries as they will get a good that they are not efficient in producing.

(d) The production possibilities for Zeetopia and Freshland can be shown on the graph below. The horizontal axis represents the production of coconuts, while the vertical axis represents the production of mangoes. The slope of each production possibility curve (PPC) represents the opportunity cost of producing one good in terms of the other. The numerical values from the table above are plotted on the graph.

(e) The combination of coconuts and mangoes labeled X is unattainable for Freshland but feasible and inefficient for Zeetopia. Therefore, Freshland cannot produce at point X due to its limited resources, while Zeetopia is not using all of its resources efficiently if it produces at point X.

To know more about comparative advantage  please visit :

https://brainly.com/question/2827889

#SPJ11

Security plan is a document that describes how an organization will address its security needs. Here are three factors that should be considered when developing a security plan:

Risk assessment: A thorough risk assessment should be conducted to identify potential security threats and vulnerabilities to the organization. This can include conducting a physical security assessment, reviewing current policies and procedures, and analyzing the organization's technology infrastructure.

Compliance requirements: Organizations may have legal and regulatory requirements that must be met in regards to security. It is important to identify these requirements and ensure that the security plan addresses them appropriately.

Resource allocation: Developing a comprehensive security plan can be resource-intensive. Organizations should consider the financial and human resources that will be required to implement and maintain the plan over time. This can include budgeting for security technology, hiring security personnel, and providing ongoing training for employees.

Know more about Security plan here:

https://brainly.com/question/30458066

#SPJ11

The 90% confidence interval for the population mean is (73.06, 80.94).

The closest option to this answer is d. 73.87 to 80.14

To calculate the confidence interval for the population mean, we can use the formula:

[tex]CI = \bar{x} \pm z* (\sigma /\sqrt{n} )[/tex]

where:

[tex]\bar{x}[/tex] is the sample mean

σ is the population standard deviation (unknown, so we use the sample standard deviation, s, as an estimate)

n is the sample size

z* is the critical value from the standard normal distribution corresponding to the desired level of confidence (90% in this case)

Plugging in the values we have:

CI = 77 ± 1.645 * (19/√100)

CI = 77 ± 3.94

CI = (73.06, 80.94).

Option to this answer is d. 73.87 to 80.14

For similar question on confidence interval.

https://brainly.com/question/30532501

#SPJ11

A random sample of 100 customers who visited a department store spent an average of $77 with a standard deviation of $19. The 90% confidence interval for the population mean is: a. 75.56 to 79.44.

The 90% confidence interval for the population mean is calculated using the formula:

(sample mean) +/- (critical value) * (standard error of the mean)

The critical value for a 90% confidence interval with a sample size of 100 is 1.645. The standard error of the mean is calculated by dividing the standard deviation by the square root of the sample size:

$19 / \sqrt{100} = $1.90

Plugging in the values, we get:

$77 +/- 1.645 * 1.90 = $77 +/- $3.13

So the 90% confidence interval for the population mean is from $73.87 to $80.14.

Therefore, the answer is d. 73.87 to 80.14.

Learn more about standard deviation at: brainly.com/question/23907081

#SPJ11

Answer:

10 dollars

Step-by-step explanation:

Answer:

y = 1250 - .22t

The volume of the scoop of ice cream is 14.137 cm³. The height of the cone must be 2.12 cm to fit all the ice cream without spilling if it melts.

Given that,The radius of the ice cream scoop = r1 = 1.5 cm

Radius of the cone = r2 = 1.5 cm.

The scoop of ice cream is in the shape of a whole sphere. Therefore,Volume of the sphere,

V1 = (4/3)πr1³

Volume of the scoop of ice cream = V1

= (4/3)π(1.5)³ cm³

= 14.137 cm³

The scoop of ice cream is sitting in a right cone.

Therefore,Volume of the cone,V2 = (1/3)πr2²h, where h is the height of the cone.We can also find the height of the cone using Pythagoras theorem.

h² = r2² + r1²h = √(r2² + r1²)

h = √(1.5² + 1.5²)

h = √(4.5)h = 2.12 cm

The height of the cone is 2.12 cm.

Therefore,Volume of the cone,

V2 = (1/3)πr2²h

V2 = (1/3)π(1.5)²(2.12) cm³

= 4.71 cm³

Total volume required to fit all the ice cream

= V1 + V2

= 14.137 + 4.71

= 18.847 cm³

Therefore, the volume of the scoop of ice cream is 14.137 cm³. The height of the cone must be 2.12 cm to fit all the ice cream without spilling if it melts.

To know more about volume visit:

https://brainly.com/question/28058531

#SPJ11

Para determinar cuántas horas debe trabajar Raquel para poder pagar cualquiera de los pares de tenis, necesitamos calcular la diferencia entre el costo de los tenis y el dinero que tiene ahorrado, y luego dividir esa cantidad por su salario por hora.

Diferencia entre el costo de los tenis y el dinero ahorrado:

Costo de los tenis: $450, $459, $479 (cualquiera de los tres)

Dinero ahorrado: $310

Diferencia = Costo de los tenis - Dinero ahorrado

Ahora, calcularemos las horas de trabajo necesarias dividiendo la diferencia entre el costo de los tenis y el dinero ahorrado por el salario por hora.

Horas de trabajo necesarias = Diferencia / Salario por hora

Por ejemplo, si consideramos el par de tenis que cuesta $450:

Diferencia = $450 - $310 = $140

Horas de trabajo necesarias = $140 / $10.50

Raquel debería trabajar aproximadamente 13.33 horas para poder pagar el par de tenis que cuesta $450.

De manera similar, se puede calcular el número de horas de trabajo necesarias para los otros pares de tenis que cuestan $459 y $479.

Learn more about cualquiera here:

https://brainly.com/question/31740607

#SPJ11

The probability that only one dog is selected when two animals are drawn at random from the shelter without replacement is 16/33.

To find the probability that only one dog is selected when two animals are drawn at random from the shelter without replacement, we can follow these steps:

Determine the total number of animals in the shelter: There are 4 cats and 8 dogs, so there are 12 animals in total.
Calculate the number of ways to select two animals from the shelter: This can be done using combinations, which is represented by the formula C(n, r) = n! / (r!(n-r)!), where n is the total number of animals and r is the number of animals we want to select. In this case, n = 12 and r = 2, so C(12, 2) = 12! / (2!(12-2)!) = 66.

Determine the number of ways to select only one dog: This can be done by multiplying the number of ways to select one dog with the number of ways to select one cat. There are 8 dogs and 4 cats, so the number of ways to select only one dog is 8 * 4 = 32.
Calculate the probability: Finally, divide the number of ways to select only one dog by the total number of ways to select two animals. The probability of selecting only one dog is 32 / 66, which simplifies to 16 / 33.

So, the probability that only one dog is selected when two animals are drawn at random from the shelter without replacement is 16/33.

Learn more about probability

brainly.com/question/30034780

#SPJ11

Answer: North 136.81 mph

               East: 375.88 mph

Step-by-step explanation:

Hi there,

First you are going to want to set up a triangle based on the given information. You are giving a bearing for the degrees of the triangle, so the angle for the triangle you are going to solve will be 20 degrees.

You can use either Law of Sines or SOHCAHTOA to solve, but since you are setting up a right triangle I would use SOHCAHTOA. You are trying to find the vertical and horizontal components so start with sine to find the y-value. It should look like:

sin(20)=(opposite side of the given angle/400)

It will be travelling North at 136.81 mph

Similarly, we now need to find the horizontal component. Start by using cosine. It should look like

cos(20)=(side adjacent to the given angle/400)

It should be traveling East at 375.88 mph

Hope this helps.

The north component is 137.64 mi/h and the east component is 123.12 mi/h.

To find the north and east components of the velocity, we can use trigonometry.

The velocity can be divided into two components: one in the north direction and one in the east direction. The north component is given by:

North component = Velocity x sin(θ)

where θ is the angle between the velocity vector and the north direction.

Similarly, the east component is given by:

East component = Velocity x cos(θ)

where θ is the angle between the velocity vector and the east direction.

In this case, the angle between the velocity vector and the north direction is (90° - 70°) = 20° (since the direction is given as "n 70° e", which means 70° east of north). Therefore:

North component = 400 x sin(20°) = 137.64 mi/h

The angle between the velocity vector and the east direction is 70°. Therefore:

East component = 400 x cos(70°) = 123.12 mi/h

Rounding to two decimal places, the north component is 137.64 mi/h and the east component is 123.12 mi/h.

for such more question on component

https://brainly.com/question/4088563

#SPJ11