what is the solute when stirring salt in water until the salt disappears?

Answer:

c. pairs of electrons are shared between two nonmetal atoms

Explanation:

Bonding between elements solely depends on their electronegativity. When there is large difference in electronegativity, those atoms form ionic bonds. Covalent bonds form when the difference is minimal, or none at all. When the difference between electronegativities is 0 or very close to 0, then they form pure covalent bonds, or nonpolar bonds. An example of this are diatomic molecules. Diatomic molecules are two of the same atom that form nonpolar covalent bonds because their electronegativy difference is 0, as they have the same electronegativity. When the electronnegativties have bit of difference, they form polar covalent bonds.

Answer:

Answer:

[Xe] 6s2

Explanation:

hope it helps Electron configuration

Answer:

g/100g

Explanation:

grams per 100 g of solvent or short term g/100g

Answer:

grams of solute per milliliters of solution

Explanation:

ur welcome

Un elemento químico, o un elemento, se define como un material que no puede descomponerse ni transformarse en otra sustancia por medios químicos. Cada elemento se identifica según la cantidad de protones que tiene en su núcleo atómico. Se puede crear un nuevo elemento agregando más protones a un átomo.

_________

Espero eso ayude ⚜

ITZY :)

The statement which is true is Core electrons effectively shield outer

electrons from nuclear charge.

Core electrons are those which are in close proximity with the nucleus.  The

core electrons repel the outer electrons farther away from the nucleus to

shield it from nuclear charge.

The valence electrons are usually found in the outermost part of the shell

and they are the easiest to remove due to the fact that they have to achieve

a stable octet configuration which makes them easily removed during

chemical reactions.

Read more on https://brainly.com/question/371590

Answer: core electrons effectively shield outer electrons from nuclear charge

Explanation:

Answer:

Cu3 (PO4)2

3×64 + 2×(31+ 4×16)

192 + 2×(31+64)

192 + 2×(95)

192+190

=382g

Answer:

Number of Significant Figures: 4

The Significant Figures are 5 4 3 9

Explanation:

Answer:

lower th

Explanation:

Pb{Cl}_{2})$ is an inorganic

answer:

lower the temperature so the lead chloride settles out of solution

compound which is a white solid under ambient conditions. It is one of the most important lead-based

reagents. It is poorly soluble in water. And it is insoluble in cold water. Sodium chloride is ssolble at all temperature

so lower the temperature

Ques.1: Why do you think that you had to use a thin layer of onion skin, rather than a thick layer for the microscope?

Ans:- It is because, I the onion peel is thick layered, then it will be hard or impossible to see through the microscope.

Ques.2: When iodine reacts with starch, it produces a blue-black color. Starch is a white substance which plants use to store food. What structure did you see better because of the iodine? Why did you see this structure better?

Ans: Amylose in starch is responsible for the formation of a deep blue color in the presence of iodine. The iodine molecule slips inside of the amylose coil.

This makes a linear triiodide ion complex with is soluble that slips into the coil of the starch causing an intense blue-black color.

Due to this, we can see the structure better.

Ques.3: From low power to high power, what structures became clearer in the stained onion tissue?

Ans: From lower to higher power, we can see:-

-- Large, rectangular interlocking cells,

-- Clearly visible distinct cell walls surrounding the cells,

-- Dark stained nucleus,

-- Large vacuoles at the center,

-- Small granules may be observed inside the cells (within the cytoplasm)

Ques.4: What is the shape of an onion cell?

Ans: The shape of an onion cell is rectangular or square in shape.

Answer:

less

Explanation:

An electron has a charge of -1 so if there are more electrons than protons the overall charge of the atom is going to be negative

Answer:

The surface temperature of a star determines the color of light it emits. Blue stars are hotter

hope this helps :)

Answer:

Modern recorders are most commonly pitched at A=440 Hz, but among serious amateurs and professionals, other pitch standards are often found. For the performance of baroque music, A=415 Hz is the de facto standard, while pre-Baroque music is often performed at A=440 Hz or A=466 Hz.

Explanation:

Answer:

An ion is a charged atom or molecule. It is charged because the number of electrons do not equal the number of protons in the atom or molecule. An atom can acquire a positive charge or a negative charge depending on whether the number of electrons in an atom is greater or less then the number of protons in the atom.

Answer:

The more polar the liquid, the more likely that it is miscible with water. The polarity of a liquid does not affect its miscibility with water. The less polar the liquid, the more likely that it is miscible with water. The more polar the liquid, the less likely that it is miscible with water.

Explanation:

hope it helps you

Miscibility of two liquids are directly related to their polarity. The likelihood that a liquid will mix with water increases with its polarity.

Polarity is the arrangement of electrical charge among the atoms connected by a chemical bond. Because both hydrogen atoms in H2 were electrically neutral, bonds among atoms of different elements were electrically inequivalent, as opposed to bonds among identical atoms, which are electrically uniform.

The likelihood that a liquid will mix with water increases with its polarity. Liquid miscibility with water is unaffected by the polarity of the liquid. The likelihood that a liquid will mix with water increases with decreasing polarity. The likelihood that a liquid will be miscible with water decreases with increasing polarity.

Therefore, miscibility and polarity are directly related.

To learn more about polarity, here:

https://brainly.com/question/29217577

#SPJ6

Calcium oxide + water = calcium hydroxide.

Magnesium + hydrochloric acid = magnesium chloride + hydrogen.

Sodium hydrogen carbonate + citric acid  = Na3C6H5O7(aq)+3H2O(l)+3CO2(g)

Iron + salt water = 4Fe(OH)3 (rust)

Answer:

1. CaO + H2O _____ Ca(OH)2

Calcium oxide + Water _____ Calcium hydroxide

2. 2 HCI + MG _____ MgCl2 + H2

Magnesium + hydrochloric acid _____ Magnesium Chloride + hydrogen gas

Answer

The negative ion is larger than the original atom.

Explanation:

This means that with fewer electrons but the same number of positive protons, the size of the ionic radius will decrease.

I hope this helped!

Answer:

Group 2A (or IIA) of the periodic table are the alkaline earth metals:  beryllium (Be), magnesium (Mg), calcium (Ca), strontium (Sr), barium (Ba), and radium (Ra).  They are harder and less reactive than the alkali metals of Group 1A.  The name comes from the fact that the oxides of these metals produced basic solutions when dissolved in water, and they remained solids at the temperatures available to the ancient alchemists.  Like the Group 1A elements, the alkaline earth metals are too reactive to be found in nature in their elemental form.

The alkaline earth metals have two valence electrons in their highest-energy orbitals (ns2). They are smaller than the alkali metals of the same period, and therefore have higher ionization energies.  In most cases, the alkaline earth metals are ionized to form a 2+ charge.

The alkaline earth metals have much higher melting points than the alkali metals: beryllium melts at 1287ºC, magnesium at 649ºC, calcium at 839ºC, strontium at 768ºC, barium at 727ºC, and radium at 700ºC.  They are harder metals than the Group 1A elements, but are soft and lightweight compared to many of the transition metals.

Salts of the Group 2A metals are less soluble in water than those of Group 1A because of the higher charge densities on the 2+ cations; nevertheless, many Group 2A salts are at least moderately soluble.   Some Group 2A salts bond strongly to water molecules, and crystallize as hydrates; among these are Epsom salt, MgSO4·7H2O, and gypsum, CaSO4·2H2O.

Explanation:

Answer:

H2, N2, O2, F2, Cl2, Br2, I2

Explanation:

The 7 diatomic elements in the periodic table are Hydrogen, Nitrogen, Oxygen, Fluorine, Chlorine, Bromine and Iodine.

Answer:

0.1gram

Explanation:

mass = no of moles × molar mass

Explanation:

According to Charles law : V/T=k (constant).

the volume temperature relationship will be

V/T = 117.5/25 = 4.7

hope this helps you.

Three factors that describe the movement of surface water in streams and rivers are the river's gradient, flow, and stream load.

I hope this helps!

Sorting the chemical elements in order from least reactive to most reactive, we have:

1. Fluorine (F).

2. Arsenic (As).

3. Antimony (Sb).

4. Silicon (S).

Given the following chemical elements:

Reactivity can be defined as a chemical property which determines how readily a chemical element bonds with other chemical elements, in order to form a new chemical compound.

Generally, the ability of a chemical element to bond with other chemical elements is largely (highly) dependent on the number of valence electrons it has in the outermost shell of its atomic nucleus.

As a general rule, chemical elements that are having fewer number of valence electrons are the most reactive while those having higher valence electrons are least reactive.

Also, chemical reactivity decreases down a group on the periodic table.

Based on the periodic table, the valency for the given chemical elements are:

In conclusion, sorting the chemical elements in order from least reactive to most reactive, we have:

1. Fluorine (F).

2. Arsenic (As).

3. Antimony (Sb).

4. Silicon (S).

Find more information: https://brainly.com/question/18214726

Answer:

.06 M NA+

Explanation:

You go from (.02M Na3PO4 / 1) x (3 mole Na+ / 1 mole Na3PO4) = .06 M Na+

Answer:

Explanation:

2,4 di methyl means that there are 2 methyl groups on the 2 and 4 carbons. hexane means there are 6 carbons in total for the carbon chain

first pic

3,3 diethyl means there are 2 ethyl groups on the 3 carbon chain. 4 mthyl means 1 methyl group on the 4 carbon chain, 5 propyloctane means that there are 1 propylo on the 5 carbon chain. and that the carbon chain is a octane meaning 8 carbons.

second pic

Answer:liters

Explanation:

Answer:

Group 17

Explanation:

Group 16 of nonmetals will react with alkaline earth metals to form a compound in a 1 : 1 ratio. Therefore, option (b) is correct.

Alkaline earth metals or Group 2 includes six elements which are Beryllium (Be), Magnesium (Mg), Calcium (Ca), Strontium (Sr), Barium (Ba), and Radium (Ra).

This group contains smooth, silver metals with a less metallic character than group 1.  All alkaline earth metals have two valence electrons, giving a valency of 2. These metals easily lose electrons to form compounds via ionic bonds and become more stable.

The valency of calcium is 2 and the valency of the elements of group 16 is also 2. Therefore they can combine 1 : 1 ratio to form a neutral compound.

Ca²⁺    +   O²⁻   →  CaO

Therefore, the nonmetals of group 16 will react with alkaline earth metal.

Learn more about alkaline earth metals, here:

https://brainly.com/question/11857448

#SPJ2