Answer:Transcript A liquid’s vapor pressure is directly related to the intermolecular forces present between its molecules. The stronger these forces, the lower the rate of evaporation and the lower the vapor pressure.
Explanation:
As vapors are produced more from a liquid there will be more cooling effect as vapors are inversely proportional to the boiling point that means lesser the boiling point better will be the evaporation.
Intermolecular forces are the forces present between the molecules and liquid’s vapor pressure is directly related to the intermolecular forces as well . The stronger these forces, the lower the rate of evaporation and the lower the vapor pressure.
Therefore, the relationship between the vapor pressure of a liquid and how well it cools by evaporation is having direct proportionality.
Learn more about evaporation, here:
https://brainly.com/question/5019199?referrer=searchResults
#SPJ2
The element x forms the chloride containing 75. 0% cl, by mass. What is element x?.
Answer: x will be the element cobalt
when the same types of atoms combine the substance is
Answer: Compound
Explanation:
The same types of atoms combine the substance is Molecule.
What is atom ?
A substance's tiniest component that cannot be destroyed chemically. A proton (a positive particle) and a neutron (a neutral particle) make up the nucleus (center) of each atom (particles with no charge). The nucleus is filled with negative electrons. Chemical reactions cannot generate or destroy atoms since they are indivisible particles. The mass and chemical makeup of an element's atoms are the same. The masses and chemical characteristics of atoms differ amongst elements.
What is molecule?
The number of atoms that make up a molecule might vary. Pillows, sheets, and mattress toppers are now part of Molecule's growing line of sleep essentials. To give sleepers a cool, supportive surface, the Molecule AirTEC Mattress Topper blends three layers of open-cell memory foam, AirTEC foam, and polyfoam.
Therefore, the same types of atoms combine the substance is Molecule.
Learn more about atom from the give link.
https://brainly.com/question/17545314
#SPJ4
explain why the concentrations of a mixture at equilibrium are constant
At equilibrium, the rates of the forward and reverse reactions are equal, meaning that the products are being formed at the same rate as they are being consumed.
As a result, there is no change in the concentration of the reactants or products over time. This is so because the chemical reaction is balanced, and any change in a substance's concentration would cause an imbalance, which would cause the reaction to shift until the new balance was reached. To put it another way, if the concentration of one drug rises, the reaction will change to eat it up until the concentration falls to a point where it is balanced with the other components in the reaction mixture.
The reaction will change to produce more of the substance in question whenever the concentration of that substance decreases. As a result, at equilibrium, a mixture's concentrations are constant.
Learn more about equilibrium:
brainly.com/question/28527601
#SPJ4
which factors lead to the diversity of carbon-based (organic) molecules?
The diversity of organic molecules is largely due to the properties of carbon atom, which allows for formation of strong covalent bonds with other elements and can form various structures, such as chains, rings, and branched structures.
The diversity of organic molecules arises from the ability of carbon atoms to form strong covalent bonds with a variety of other elements, including hydrogen, oxygen, nitrogen, and sulfur.
Carbon's ability to bond with multiple other elements, as well as its capacity for forming stable chains, rings, and branched structures, allows for the creation of a wide range of organic molecules with unique properties.
Additionally, organic molecules can undergo a variety of chemical reactions, such as substitution, addition, and elimination reactions, which further increases the diversity of organic compounds. These reactions can lead to the formation of new and complex organic molecules, as well as the modification of existing ones.
Furthermore, the presence of functional groups, such as hydroxyl, carbonyl, and amine groups, imparts specific chemical and physical properties to organic molecules, further contributing to their diversity.
To know more about covalent bonds click on the link below:
https://brainly.com/question/10777799#
#SPJ11
The percent by mass of acetone (MM = 58.08 g/mol) in an aqueous solution is 36.1%. What is the molality of the acetone solution?
The acetone solution has a molality of 9.76 mol/kg in an aqueous solution.
What is the molality of an aqueous solution of hydrochloric acid that is 13.0% by mass?The solution has a molality of 4.1. We know that we have 13 g of HCl in 100 g of solution because to the 13% solution's mass. It is necessary to convert the 13 g of HCl into moles using its molar mass, which is 1.01 + 35.45 = 36.46 g/mol g / m o l.
We can first convert the percentage of acetone by mass to grammes of acetone as follows:
36.1% by mass = 36.1 g acetone / 100 g solution
Next, we can find the mass of water in the solution:
100 g solution - 36.1 g acetone = 63.9 g water
Now, we can find the number of moles of acetone:
36.1 g acetone / 58.08 g/mol = 0.622 mol acetone
Finally, we can calculate the molality of the solution:
0.622 mol acetone / (63.9 g water / 1000 g/kg) = 9.76 mol/kg
To know more about molality visit:-
https://brainly.com/question/26921570
#SPJ1
A gas made from carbon and hydrogen has a density of 1. 16g/L at STP, What is its molar mass?
A gas made from carbon and hydrogen has a density of 1. 16g/L at STP, the molar mass will be 25.984 g/mole
The standard temperature and pressure are referred to as the STP conditions. As reference values for gases, pressure values at 1 atmosphere and temperature at 0°C are utilized. And under these circumstances, a mole of any gas takes up around 22.4 liters of space.
The mass that is present per unit volume of a substance is known as its density. You understand that 1. 16 g/L indicates that this gas has a mass of 1. 16 g per liter.
Given that one mole of gas at STP takes up 22.4 litres, you can state that the mass of one mole of this gas will be:
22.4 L× 1. 16 = 25.984 g
Finally, the molar mass of this gas is 25.984 g/mole if 1 mole of it weighs 25.984 g.
Learn more about STP at brainly.com/question/8846039
#SPJ4
For each question below , equal volumes of two aqueous solutions are mixed. List the species that are present (ions, compounds, etc.) and their concentrations after mixing if they remain in solution. Include the phases for the species present: You don need to list water. a. Equal volumes of a 1.0 M lead (II) nitrate mixed with 1.0 M sodium chloride PbCl; (s) 1.0 M NO3^-1 05 M Na+ 0.25 M Pb+2
b. Equal volumes of 1.0 M ammonium carbonate mixed with 1.0 M potassium perchlorate 1.0 M NH4+ 0.5 M K+ 0.5 M CO3^-2
0.5 M CIO4^-1
The solution will contain the remaining ions. But PbCl₂ is insoluble in water and forms precipitate
Ions are what?Ions are molecules or atoms that have had one or more electrons added or taken away, giving them an electric charge. They can have a neutral, positive, or negative charge. Ions with a positive charge are known as cations, while those with a negative charge are known as anions. Ions can be used to conduct electricity and play a crucial role in chemical reactions.
Evaluating :(a) In a liter of solution, 1M of Pb(NO₃)₂ contains 1 mol of Pb⁺² ions and 2 moles of NO₃⁻¹ ions
In a liter of solution, 1M of NaCl contains 1 mol of Na⁺¹ ions and 1 mole of Cl⁻¹ ions.
As a result, Concentration of Aqueous Nitrate ions(NO₃)= 2 mols/2 L= 1 M
Therefore, Concentration of Aqueous Na⁺¹ ions= 1mols/2 L= 0.5M
But PbCl₂ is insoluble in water and forms precipitate
b. 1M of KClO₄ contains 1 mol of K⁺ ions and 1 mol of ClO₄⁻¹ ions in 1 liter of solution.
1M of (NH₄)₂CO₃ contains 2 mol of NH₄⁺¹ ions and 1 mol of CO₃⁻² ions in 1 liter of solution.
As a result, the concentration of aqueous ammonium ions (NH₄⁺¹) is 2 mols/2 L
=1 M,
Concentration of Aqueous Carbonate ions(CO₃⁻²)= 1mol/2 L
= 0.5 M
Therefore , Concentration of Aqueous potassium ions(K⁺¹)= 1mol/2 L
= 0.5M
Hence , It is considered insoluble because hot water is not mentioned in the question.
Learn more about Concentration of aqueous :
brainly.com/question/18761928
#SPJ4
if one spills hydrochloric acid on one's hands, what is the first thing one should do?
If you spill hydrochloric acid on your skin, rinse the affected area immediately with large amounts of water for at least 20 minutes.
Do not try to neutralize the acid with any other substance as this can cause further damage. Remove any contaminated clothing and rinse the affected skin thoroughly with water. Seek medical attention immediately, especially if the acid has caused a deep wound or has been in contact with the eyes.
It's important to remember that hydrochloric acid can cause serious chemical burns and can be extremely damaging to the skin and eyes. Prompt first aid measures can prevent further damage and reduce the risk of long-term complications. Additionally, it's important to always wear protective gear such as gloves and goggles when handling any type of hazardous chemical.
To know more about hydrochloric acid click here:
https://brainly.com/question/15231576#
#SPJ11
use the periodic table to predict which ion will form from each main‑group element.
The ion will form from each main‑group element in periodic table is :
Na : Na⁺
F : F⁻
N : N³⁻
I : I⁻
Sr : Sr²⁺
The periodic table will help in identifying the type of the ion that an element can form which is based on the electrons need to be gained or the lost and become stable. The element with the positive charge means it losses the electrons to fulfil the octet rule and become stable.
The element with the negative charge show that the element gains the electrons to become stable. To becom stable the element needs to statisfy the octete rule that to have the 8 electrons in the outer most shell.
The question is incomplete, the complete question is :
Use the periodic table to predict which ion will form from each main-group element.
Na:
F:
N:
I:
Sr:
To learn more about periodic table here
https://brainly.com/question/28541281
#SPJ4
how many moles of zinc must react in order to form 18.6 moles of water
Answer:
Explanation:
Zn+H
2
SO
4
→ZnSO
4
+H
2
what is the net charge on lys at neutral ph (for the dominant ionic species)?
The net charge on lysine (lys) at pH 7 will be +1.
Amino acids: These are the organic molecules which serve as the building blocks of the proteins. They contain an amine group, carboxylic acid group, hydrogen atom, and a variable portion named the R group. The R group will plays a big role in shaping the properties of the amino acid.
Lysine, or L-lysine, is an essential amino acid, means it is necessary for human health, but the body cannot make it. You have to get lysine from food or the supplements. Amino acids like lysine are the building blocks of the protein. In amino acids three are positively charged: lysine (Lys, K), arginine (Arg, R) as well as histidine (His, H).
To know more about lysine here
https://brainly.com/question/9452082
#SPJ4
How many grams of boric acid (b(oh)_3; mw= 61. 83 g/mol) should be used to make 2. 00 l of 0. 0500 m solution?.
To make 2.00 liters of a 0.0500 M solution of boric acid, you would need to add 61.83 grams (1 mole) of boric acid to the solution.
Chemical solutions are solutions made up of one or more chemicals that can be used for a variety of purposes. Chemical solutions can be used for industrial, medical, and environmental applications, and can be used to clean, disinfect, treat, or otherwise modify materials. Examples of chemical solutions include cleaning agents, solvents, antifreezes, acids, bases, and salts. Chemical solutions can also be used to create pharmaceuticals, dyes, and other products.
Learn more about chemical solutions:
https://brainly.com/question/1626520
#SPJ4
For any of the following that can exist as isomers, state the type of isomerism [Zn(en)F2] A. optical isomers B. geometric isomers C. linkage isomers D. coordination isomers E. no isomers
The coordination complex [Zn(en)F2] can exist as geometric isomers.
What is meant by geometric isomers?Geometric isomerism is a term used that concerns spatial arrangement of atoms within molecules. Geometric isomers are two or more coordination compounds which have the same number and types of atoms and bonds but which have different spatial arrangements of atoms.
Geometric isomers differ in the arrangement of ligands in space around a central metal ion. There is no optical isomerism because the complex does not have a chiral center, and it does not have linkage isomers because all the ligands are identical. It does not have coordination isomers because there is only one type of ligand, ethylenediamine (en), coordinating to the metal ion.
To know more about geometric isomers, refer
https://brainly.com/question/9064937
#SPJ4
According to Newton's First Law, what potential impact can an unbalanced force have on an object in motion?
An unbalanced force will have no impact on an object in motion.
An unbalanced force can only change the object's direction.
An unbalanced force can change both the object's direction and speed.
An unbalanced force can only change the object's speed.
The potential impact that an unbalanced force can have on an object in motion is that an unbalanced force can change both the object's direction and speed (option C).
What is Newton's first law of motion?Newton's first law of motion states that an object at rest remains at rest, and an object in motion remains in motion at constant speed and in a straight line unless acted on by an unbalanced force.
An unbalanced force is the resultant force acting on a body is not equal to zero that is capable of bringing about motion.
According to this question, an unbalanced force is capable of changing the direction and speed of an object in motion.
Learn more about Newton's law at: https://brainly.com/question/29775827
#SPJ1
acetylcholine is the neurotransmitter found in neuromuscular junctions. (T/F)
Acetylcholine acts on preganglionic neurons in the sympathetic and parasympathetic systems of the autonomic nervous system to govern a variety of processes within the autonomic system. Thus, it is true.
What main function of acetylcholine as a neurotransmitter?Muscles. Drugs that affect acetylcholine can have varying degrees of movement disturbance or even paralysis because this neurotransmitter is crucial for muscular function.
This neurotransmitter functions to activate muscles in the peripheral nervous system and is a key component of the autonomic nervous system.
Therefore, it is true that Acetylcholine serves as the neurotransmitter in the peripheral nervous system that carries messages from motor nerves to skeletal muscles.
Learn more about acetylcholine here:
https://brainly.com/question/29855206
#SPJ4
Acetylcholine acts on neurons in the sympathetic and parasympathetic systems of the autonomic nervous system to govern a variety of processes within the autonomic system. Thus, it is true.
What main function of acetylcholine as a neurotransmitter?Muscles. Drugs that affect acetylcholine can have varying degrees of movement disturbance or even paralysis because this neurotransmitter is crucial for muscular function.
This neurotransmitter functions to activate muscles in the peripheral nervous system and is a key component of the autonomic nervous system.
Therefore, it is true that Acetylcholine serves as the neurotransmitter in the peripheral nervous system that carries messages from motor nerves to skeletal muscles.
Learn more about acetylcholine here:
brainly.com/question/29855206
#SPJ4
rationalize the temperature dependence of the solubility of a gas in water in terms of the kinetic molecular theory.
The temperature dependence of the solubility of a gas in water can be rationalized in terms of the kinetic molecular theory by considering the effects of the increased temperature on the kinetic energy of the gas molecules, their rate of collisions with the water and air surfaces, and the vapor pressure of the gas in the air above the liquid.
The temperature dependence of the solubility of a gas in water can be rationalized in terms of the kinetic molecular theory as follows:
According to the kinetic molecular theory, the solubility of a gas in a liquid is directly proportional to the number of gas molecules that escape from the surface of the liquid into the air.
The solubility of a gas in water increases with increasing temperature because the increased temperature results in an increase in the kinetic energy of the gas molecules. This increased kinetic energy causes the gas molecules to move more rapidly and collide more frequently with the surface of the liquid, resulting in a greater number of gas molecules escaping into the air.
At the same time, the increased temperature also increases the vapor pressure of the gas in the air above the liquid. The vapor pressure of a gas is directly proportional to the number of gas molecules in the air, so the increased vapor pressure results in a greater number of gas molecules escaping from the air back into the water.
However, the increased kinetic energy of the gas molecules in the water also results in an increased rate of collisions between the gas molecules and the water molecules, causing the gas molecules to dissolve more readily in the water. As a result, the overall effect of the increased temperature is to increase the solubility of the gas in water.
Learn more about kinetic energy here:
https://brainly.com/question/26472013
#SPJ4
a red blood cell with a 1% nacl concentration is moved to a solution with 0.1% nacl concentration. what will happen to the red blood cell in this new solution?
When the Red Blood Cell is moved to a Solution of 0.1% Nacl the cell will swell by Endosmosis and finally may burst.It is a type of Osmosis
Osmosis is a method of passive transport in which solutions move from a region of high solute concentration to low solute concentration. Based on Concentration or Tonicity the solutions can be of 3 types Hypertonic - When cells are placed in High solute concentration the solvent will move outside due to exosmosis.
Hypotonic-When the concentration of solution is less than that of inside the cell.
Isotonic - Same concentration inside and outside the cell.
0.1% means low solute concentration, when a cell is placed in Hypotonic- The water will move into the cell and the cell will swell up.
Learn more about Osmosis here
https://brainly.com/question/1799974
#SPJ4
Describe how you will separate a mixture of gari and sugar
Answer:
gari / sugar
Explanation:
Predicting Products Given a set of reactants, choose the most likely products. Fe + K3As
K3 + Fe3As
K + FeAs
As+ K3Fe
no reaction
The expected reaction is "no reaction." Iron (Fe) and Potassium Arsenide (K₃As) do not react to form the listed products, option D.
What are the roles of reactants in a reaction?The reactants in a chemical reaction are the starting materials that undergo a transformation to form new substances, which are known as products. They play a crucial role in determining the outcome of the reaction, as the type and amount of reactants can affect the speed, yield, and type of products formed.
In a chemical reaction, the reactants react with one another, breaking and forming bonds, to create new chemical species. The change in reactants results in the formation of different products, which in turn can go on to participate in further reactions. "No reaction" is the expected response. The listed products are not formed by the reactions of iron (Fe) and potassium arsenide (K₃As).
Learn more on reactants here: https://brainly.com/question/26283409
#SPJ1
Given the set of reactants, the most likely outcome would be that there is no reaction.
Feasibility of a reactionConsidering the reaction: [tex]Fe + K_3As[/tex]
Fe cannot displace K in solution because potassium is higher on the reactivity series than Fe.
In the same vein, Fe cannot react with K. In other words, Fe can neither displace K from the solution nor can it react with K. Hence, no reaction can occur as far as the equation is concerned.
More of the feasibility of chemical reactions can be found here: https://brainly.com/question/27819793
#SPJ1
what does the arrow indicate 3d molecular designs
An electron pair travelling to another atom is depicted by a double-barbed arrow. The movement of a single electron from each atom to create a link between them is depicted by single-barbed arrows.
A molecule's three-dimensional structure or arrangement is a crucial aspect. The preferred spatial orientation of covalent connections to atoms with two or more bonding partners determines this form. The greatest way to view three dimensional setups is with the aid of models. A bond that is roughly in the surface plane is represented by a straightforward straight line. A hatching bond is directed behind the plane, and a wedge-shaped bond is directed in front of it (thick end facing the spectator) (away from the viewer).
To learn more about electrons click here https://brainly.com/question/15054861
#SPJ4
Directions: Select the choice that best fits each statement. The following question(s) refer to the qualities of water samples.
A. Acidity
B. Turbidity
C. Hardness
D. Dissolved oxygen
E. Salinity
Measured by the amount of Ca2+ and Mg2+
Acidity the qualities of water samples.
Acidic water is defined as having a pH lower than 7. The pH of water reveals how basic (alkaline) or acidic it is. The pH scale for this measurement runs from 0 to 14, with 7 being neutral. The United States Environmental Protection Agency (EPA) advises keeping public water within a pH range of 6.5 to 8, even though it does not control the pH of drinking water. Acidic water may be advantageous for skin, hair, and washing produce since it is thought to have antibacterial properties. It can also have a lot of unfavorable and perhaps harmful side effects. This article discusses acidic water's definition, potential drawbacks and advantages, and how to get rid of it from your drinking water.
Lean more about Acidity
brainly.com/question/1427848
#SPJ4
lead has an atomic radius of 175 pm and a face-centered crystal structure. the molar mass of lead is 207.2 g/mol. calculate the density of lead in g/cm3
To calculate the density of lead in g/cm3, you need to know the molar mass and the atomic radius of lead.
The molar mass of lead is 207.2 g/mol and the atomic radius of lead is 175 pm. The density of lead can be calculated using the formula density = molar mass/volume.
Since lead is in a face-centered cubic crystal structure, the volume of a unit cell is given by the formula volume = (4/3) × π × (atomic radius)3. Substituting the values for molar mass and atomic radius into the formula for density gives the following result: density = 207.2 g/mol / (4/3) × π × (175 x 10-12 m)3 = 11.34 g/cm3.
Learn more about crystal structure:
https://brainly.com/question/10816130
#SPJ4
what is the molarity of ions in a 0.620 m solution of ca(oh)₂ assuming the compound dissociates completely?
The molarity of the ions in a 0.620 M solution of Ca(OH)₂ assuming the compound dissociates completely is molarity of the calcium ion, Ca²⁺ = 0.620 M and molarity of the hydroxide ion, OH⁻ = 1.24 M.
The Ca(OH)₂ dissociation reaction is as follows :
Ca(OH)₂ ---> Ca²⁺ + 2(OH⁻)
The number moles of the Ca(OH)₂ = 0.620 M
The molarity of the calcium ion, Ca²⁺ = 0.620 M
The molarity of the hydroxide ion, OH⁻ = 2 × 0.620
The molarity of the hydroxide ion, OH⁻ = 1.24 M
Thus, the molarity of Ca²⁺ is 0.620 M and the molarity of the hydroxide ion, OH⁻ is 1.24 M.
To learn more about molarity here
https://brainly.com/question/27801126
#SPJ4
Which metal can replace iron in a single replacement reaction?
Zinc will take the place of iron in the compound since it comes before iron in the activity sequence. ZnCl2 and Fe are the byproducts of this single replacement process.
A single element replaces one atom in a compound to create a new compound as well as a pure element in a single replacement reaction. In a compound, metals always replace metals and nonmetals always replace nonmetals, similar to double replacement reactions.
When pieces of two ionic compounds are swapped to create two new compounds, the process is known as a double-replacement reaction. A double-replacement equation has two chemicals acting as reactants and two separate compounds acting as products.
The relative reactivities of the two metals can be used to predict whether one metal will take the place of another metal in a complex. An activity series of metals, which groups metals in decreasing order of reactivity, can assist us in determining this.
Learn more about reactive metals here https://brainly.com/question/22929949
#SPJ4
The ionic compound Na2Cr2O7 is soluble in water. Calculate the osmotic pressure (in atm) generated when 17.5 grams of sodium dichromate are dissolved in 87.4 mL of an aqueous solution at 298 K. The van't Hoff factor for Na2Cr2O7 in this solution is 2.54.
The osmotic pressure generated when 17.5 g of Na2Cr2O7 are dissolved in 87.4 mL of water at 298 K is 6.02 atm.
What is Van't hoff factor?The van't Hoff factor (i) is a concept in thermodynamics that represents the number of particles into which a solute dissociates in solution. For example, when a salt dissolves in water, it can dissociate into individual ions, increasing the concentration of solute particles in solution.
The osmotic pressure generated by a solution can be calculated using the equation:
Π = iMRT
where Π is the osmotic pressure in atm, i is the van't Hoff factor, M is the molar concentration of the solute, R is the gas constant (0.08206 Latm/molK), and T is the temperature in Kelvin.
The molar mass of Na2Cr2O7 is 258.0 g/mol, so the moles of solute can be calculated as:
n = m/M = 17.5 g / 258.0 g/mol = 0.06788 mol
The molar concentration of the solution can be calculated as:
C = n/V = 0.06788 mol / 0.0874 L = 0.7738 M
Plugging these values into the equation for osmotic pressure:
Π = iMRT = 2.54 * 0.7738 M * 0.08206 Latm/molK * 298 K = 6.02 atm
So, the osmotic pressure generated when 17.5 g of Na2Cr2O7 are dissolved in 87.4 mL of water at 298 K is 6.02 atm.
To know more about ions, visit:
https://brainly.com/question/14982375
#SPJ4
Is there any material of two or more substances that can be physically separated?
Any substance mixture of two or more that may be physically separated is often a homogeneous mixture of three or more ingredients.
Both homogeneous and heterogeneous mixtures are possible. While heterogeneous mixes have diverse compositions and/or appearances in various places, homogeneous mixtures have the same content and appearance throughout.
Homogeneous mixes include, for instance:
1. Sea salt (salt dissolved in water)
2. Air (a combination of gases such as nitrogen, oxygen, and argon) (a mixture of gases such as nitrogen, oxygen, and argon)
Additives 3. (a mixture of metals such as gold and silver)
Heterogeneous mixes include, for instance:
1. Soil (a combination of minerals, organic materials, water and air) (a mixture of minerals, organic matter, water and air)
Concrete 2. (a mixture of cement, water, sand and aggregate)
3. Salad (a mixture of vegetables and fruits)
It is crucial to remember that combinations of different materials may be physically broken down into their component parts using techniques like filtering, distillation, and centrifugation. The qualities of the mixture are often an average of the properties of the individual components, and they are typically distinct from the individual component values.
For such more question on mixture,
https://brainly.com/question/24647756
#SPJ4
In which of the following examples has the oxidation number (O.N.) of the given element been assigned correctly? Select all that apply. a) The O.N. for hydrogen in CuH is+1. b) The O.N. for Mn in KMnO4 is +2.c) The O.N. for chlorine in the ion CLO3- is +5. d) The O.N. for iron in FeO is +2. e) The O.N. for aluminum in Al2O3 is +2.
The following oxidation numbers were appropriately assigned: b) The Mn oxidation number in KMnO4 is +2. The O.N. for aluminium in Al2O3 is +3, whereas the O.N. for iron in FeO is +2.
A hypothetical charge known as the oxidation number (O.N.) is given to an element in a chemical compound. This number represents the level of oxidation or reduction of an element and is based on the idea that electrons are moved during chemical processes. The O.N. is used to balance oxidation-reduction processes and anticipate the behaviour of elements in chemical reactions. An uncombined element's O.N. is assumed to be zero, and the O.N. of a monatomic ion is assumed to be equal to its charge, according to a series of principles. During chemical reactions, the O.N. can vary, and the net change in O.N. of the reacting components must balance out to zero.
learn more about oxidation number (O.N.) here:
https://brainly.com/question/29257381
#SPJ4
How many moles are in 4.5 x 1022 atoms of Cu?
There are 0.075 moles of copper atoms in 4.5 x 10^22 atoms of Cu.
The number of moles in 4.5 x 10^22 atoms of copper can be calculated as follows:
First, we need to find the number of moles of copper atoms:
number of moles = number of atoms / Avogadro's number
number of moles = 4.5 x 10^22 atoms / 6.022 x 10^23 atoms/mol
number of moles = 0.075 mol
So, there are 0.075 moles of copper atoms in 4.5 x 10^22 atoms of Cu.
Learn more about moles here: https://brainly.com/question/30373566
#SPJ4
the ch bond in the methyl cation ch3 results from the overlap of which orbitals?
In the CH3 group, the C-H bond is formed when the SP3 hybrid orbital of the carbon atom and the s orbital of the hydrogen atom overlap.
What ch bond in the methyl cation ch3 results from the overlap of which orbitals?Covalent bonds are established by the overlapping of atomic orbitals. Sigma bonds are a consequence of the head-to-head overlapping of atomic orbitals whereas pi bonds are set up by the lateral overlap of two atomic orbitals.
When atomic orbitals overlap and together, they form molecular orbitals. Molecular orbitals are mathematical functions that narrate the location and wavelike behavior of electrons in particles. There are two general types of molecular orbitals: antibonding molecular orbitals and bonding molecular orbitals.
So we can conclude that The C‒H σ bond is created from the overlap of a carbon sp hybrid orbital with a hydrogen 1s atomic orbital.
Learn more about orbitals here: https://brainly.com/question/20319149
#SPJ1
the enthalpy (heat) of vaporization for ethanol (c2h5oh) is 43.3 kj/mol at 25°c. how much heat, in kilojoules, is required to vaporize 115 g of ethanol at 25°c?
107.5 kJ of heat is required to vaporize 115 g of ethanol at 25°C.
To find out how much heat is required to vaporize 115 g of ethanol at 25°C, we need to first convert the mass of ethanol into moles. The molar mass of ethanol is 46 g/mol, so we divide 115g by 46 g/mol to get the number of moles:
115 g / 46 g/mol = 2.5 moles
Next, we multiply the number of moles by the heat of vaporization for ethanol at 25°C to get the total heat required to vaporize 115 g of ethanol:
2.5 moles * 43.3 kJ/mol = 107.5 kJ
So, 107.5 kJ of heat is required to vaporize 115 g of ethanol at 25°C.
Learn more about enthalpy of vaporization:
https://brainly.com/question/30258840
The enthalpy (heat) of the vaporization for the ethanol (C₂H₅OH) is 43.3 kJ/mol at 25°C is 108 kJ.
The enthalpy of vaporization for the ethanol = 43.3 kJ/mol
The mass of the ethanol = 115 g
The moles of the ethanol :
The number of moles = mass / molar mass
The number of moles = 115 / 46.07
The number of moles = 2.496 mol
1 mole of ethanol = 43.3 kJ
The heat required for 2.496 mol of the ethanol :
2.496 mol of ethanol = 43.3 × 2.496 kJ
= 108 kJ
Thus, the heat required in the kilo joules is 108 kJ.
To learn more about enthalpy here
https://brainly.com/question/7241854
#SPJ4