Answer:
5.01 atm
Explanation:
To answer this question, we're going to use the PV=nRT equation, where in this case:
P = ?V = 12.2 Ln = 2.5 molR = 0.082 atm·L·mol⁻¹·K⁻¹T = 25 °C ⇒ 25 + 273.16 = 298.16 KWe input the data:
P * 12.2 L = 2.5 mol * 0.082 atm·L·mol⁻¹·K⁻¹ * 298.16 KAnd finally solve for P:
P = 5.01 atmThis timeline woulchre useful to someone who was writing a report titled
A buffered solution is made by adding 50.0g NH4Cl to 1.00 L of a 0.75M solution of NH3. Calculate the pH of the final solution. (assume no volume change).
Answer:
9.15
Explanation:
To solve this problem we'll use Henderson-Hasselbach's equation:
pH = pKa + log[tex]\frac{[A^-]}{[HA]}[/tex]For this problem:
pH = 9.25 + log[tex]\frac{[NH_3]}{[NH_4Cl]}[/tex]Now we calculate [NH₄Cl], first by converting 50.0 g of NH₄Cl into moles using its molar mass:
50.0 g NH₄Cl ÷ 53.491 g/mol = 0.935 molMeaning that [NH₄Cl] = 0.935 mol / 1.00 L = 0.935 M
Finally we calculate the pH:
pH = 9.25 + log[tex]\frac{0.75M}{0.935 M}[/tex] = 9.15The pH can be defined as the hydrogen ion concentration in the solution. The pH of ammonium chloride solution in ammonia is 9.16.
What is molarity?The molarity is the moles of a compound in the liter of solution. The molarity of 50 grams ammonium chloride in a liter of solution is given as:
[tex]\rm Molaity=\dfrac{mass}{molar\;mass\;\times\;volume(L)} \\\\NH_4Cl\;Molarity=\dfrac{50\;g}{53.491\;g/mol\;\times\;1\;L} \\\\NH_4Cl\;Molarity=0.935\;M[/tex]
The ammonia in the solution contributes to the pH from the ammonium chloride salt. The pH can be given as:
[tex]\rm pH=pKa+log\dfrac{acid}{salt}[/tex]
The pKa of ammonia is 9.25. The concentration of ammonia is given as 0.75 M.
The pH of the solution can be given as:
[tex]\rm pH=9.25+log\dfrac{0.75\;M}{0.935}\\ pH=9.25+(-0.09)\\pH=9.16[/tex]
The pH of the solution is 9.16.
Learn more about pH, here:
https://brainly.com/question/15289741
Select the correct answer.
The presence of which ion will not affect the pH of a solution?
A.
OH-
B.
H3O+
C.
H+
D.
Na+
Answer:
D. Na+
Explanation:
Na+ is the only ion here that is not related to pH. Adding OH- increases pH, and adding H3O+ or H+ (the two are interchangeable) decreases pH.
How many moles of carbon dioxide are produced using 5.8 grams of C2H2?
Answer:
50.0 moles CO2
Explanation:
An element's atomic number refers to - (TEKS 8.5A)
Answer:
An element's atomic number refers to the number of protons found in the nucleus of each atom of the element.
Answer:
ur mom
Explanation:
ur mom lol
Calculate the pH of a solution formed by mixing 550.0 mL of 0.30 M HClO with 275.0 mL of 0.20 M CsClO. The Ka for HClO is 2.9 × 10-8.
Answer:
pH = 7.08
Explanation:
We can solve this problem using Henderson-Hasselbach's equation:
pH = pKa + log[tex]\frac{[ClO^-]}{[HClO]}[/tex]With the given concentrations and volumes, we can calculate the new values for [ClO⁻] and [HClO] when the solutions are mixed:
Total volume = 550.0 mL + 275.0 mL = 825.0 mL[HClO] = 550 mL * 0.30 M / 825 mL = 0.20 M[ClO⁻] = 275 mL * 0.20 M / 825 mL = 0.07 MNow we calculate pKa:
pKa = -log(Ka) = 7.54Finally we calculate the pH:
pH = 7.54 + log[tex]\frac{0.07}{0.2}[/tex] = 7.08The formula for ammonia is NH3. How many moles are in 0.75 g of ammonia?
The number of moles that are present in 0.75 g of ammonia is 0.04 moles.
What is the relation between mass & moles?Relation between the mass and moles of any substance will be represented as:
n = W/M, where
W = given mass = 0.75gM = molar mass = 17g/molOn putting all these values, we can calculate the moles of ammonia as:
n = 0.75g / 17g/mol = 0.04 mole
Hence required moles of ammonia is 0.04 moles.
To know more about moles, visit the below link:
https://brainly.com/question/1034638
#SPJ2
What is the molality of a 10.0 % by mass solution of NaCl?
(molar mass of NaCl = 58.44 g/mol)
mol/kg
On CK-12 all of these answers are correct
1.9
1.888
1.89
1.88
The molality of a 10.0 % by mass solution of sodium chloride (NaCl) is 1.7M.
How do we calculate molarity?Molarity of any solution will be calculated as number of moles of solutes present in per litre of the solution.
Moles of the substance will be calculated as:
n = W/M, where
W = given mass
M = molar mass
Given that percent mass of NaCl = 10% i.e. 10g of NaCl is present in 100 g of solution.
We know that 1 g = 0.001 L
100 g = 0.1 L
Moles of NaCl = 10g / 58.44g/mol = 0.17 mol
Molarity of NaCl = 0.17 / 0.1 = 1.7M
Hence required molarity is 1.7 M.
To know more about molarity, visit the below link:
https://brainly.com/question/489225
I have to make this question longer so im just typing thisgjfgjfjvndfi nufnvfjnvfjnjn vnfj
(Go all the way to the bottom)
Don't forget to drink water
Answer:
Ok, thank you
Explanation:
what is the molecular formula of a compound with the empirical SO and molecular weight 96.13?
Answer:
Explanation: A compound with the empirical formula SO has a molecular weight of 96.13
Which of the following phase changes is exothermic?
gas to solid
solid to liquid
solid to gas
liquid to gas
phenol used in DNA extractiom
Answer:
This is thought to aid in the extraction, as this dissolved phenol helps denature proteins while they are still in the aqueous solution. ... Phenol/Chloroform – This is a mixture of buffer-saturated phenol and chloroform, usually close to 1:1 for DNA purification with other ratios sometimes used for RNA purification
Explanation:
Hope it helps!
If you dont mind can you please mark me as brainlest?
Answer:
This is thought to aid in the extraction, as this dissolved phenol helps denature proteins while they are still in the aqueous solution. ... Phenol/Chloroform – This is a mixture of buffer-saturated phenol and chloroform, usually close to 1:1 for DNA purification with other ratios sometimes used for RNA purification
Precipitation that falls to earth sometimes soaks into the soul and becomes____.
Answer:
not sure but i think the answer is A
what climate is Colorado in?
A.Most Subtropical Mid-Latitude
B.Polar
C.Moist ContinentaMid-Latitiude
D.Dry
Answer:
b
Explanation:
Answer:
D. Dry
Explanation:
Colorado's combination of high elevation, midlatitude, and continental interior geography results in a cool, dry climate.
4.50 g of Nacl react with 10.00 g of Agno3 to produce 7.93 g of Agcl.if the theroretical amount of agcl that can be formed is 8.43 g what is the percent yield
How can you determine if elements have the same properties?
Answer:
You will know if elements have the same properties if they are in the same column (up and down) on the periodic table.
Explanation:
Ex: Lithium and a hydrogren has the same properites bcause they are both on the same line/column. Columns are up and down the table and rows are left and right. Hope this helps
Select the correct term(s) to complete each sentence. a) The ____ is assigned a relative intensity of 100. base peak molecular ion peak b) The ____ is the most intense peak in the mass spectrum. molecular ion peak base peak c) The ____ represents the original molecule that has only lost an electron. molecular ion peak base peak d) ____ could be/represent a smaller, charged fragment of the original molecule. The base peak The molecular ion A radical cation e) ____ is/represents a positively charged species. The base peak The parent ion The molecular ion A radical cation
Answer:
a) Base Peak
b) Base Peak
c) Molecular Ion
d) Base Peak and Radical Cation
e) The Parent Ion, Molecular Ion, the Radical Cation and the Base Peak
Explanation:
a) The Base Peak is assigned a relative intensity of 100.
b) The Base Peak is the most intense peak in the mass spectrum.
c) The Molecular Ion Peak represents the original molecule that has only lost an electron.
d) Base Peak and Radical Cation could be/represent a smaller, charged fragment of the original molecule.
e) The Parent Ion, the Molecular Ion, the Radical Cation/ the Base Peak is/represents a positively charged species.
ASAP pleas
Which of the following pair of elements are found as diatomic gaseous molecules in nature?
a)carbon and chlorine
b) sulfur and oxygen
c) oxygen and hydrogen
d) Nitrogen and Neon
can u identify a chemical equation for the saponification of olive oil as per your experiment?
I
l need introduction about vitamin please
Answer:
A vitamin is an organic molecule (or a set of molecules closely related chemically, i.e. vitamers) that is an essential micronutrient which an organism needs in small quantities for the proper functioning of its metabolism. Essential nutrients cannot be synthesized in the organism, either at all or not in sufficient quantities, and therefore must be obtained through the diet. Vitamin C
Calculate the pH at the equivalence point when 22.0 mL of 0.200 M hydroxylamine, HONH2, is titrated with 0.15 M HCl. (Kb for HONH2
Answer:
pH = 3.513
Explanation:
Hello there!
In this case, since this titration is carried out via the following neutralization reaction:
[tex]HONH_2+HCl\rightarrow HONH_3^+Cl^-[/tex]
We can see the 1:1 mole ratio of the acid to the base and also to the resulting acidic salt as it comes from the strong HCl and the weak hydroxylamine. Thus, we first compute the required volume of HCl as shown below:
[tex]V_{HCl}=\frac{22.0mL*0.200M}{0.15M}=29.3mL[/tex]
Now, we can see that the moles of acid, base and acidic salt are all:
[tex]0.0220L*0.200mol/L=0.0044mol[/tex]
And therefore the concentration of the salt at the equivalence point is:
[tex][HONH_3^+Cl^-]=\frac{0.0044mol}{0.022L+0.0293L} =0.0858M[/tex]
Next, for the calculation of the pH, we need to write the ionization of the weak part of the salt as it is able to form some hydroxylamine as it is the weak base:
[tex]HONH_3^++H_2O\rightleftharpoons H_3O^++HONH_2[/tex]
Whereas the equilibrium expression is:
[tex]Ka=\frac{[H_3O^+][HONH_2]}{[HONH_3^+]}[/tex]
Whereas Ka is computed by considering Kw and Kb of hydroxylamine:
[tex]Ka=\frac{Kw}{Kb}=\frac{1x10^{-14}}{9.10x10^{-9}} \\\\Ka=1.10x10^{-6}[/tex]
So we can write:
[tex]1.10x10^{-6}=\frac{x^2}{0.0858-x}[/tex]
And neglect the x on bottom to obtain:
[tex]1.10x10^{-6}=\frac{x^2}{0.0858}\\\\x=\sqrt{1.10x10^{-6}*0.0858}=3.07x10^{-4}M[/tex]
And since x=[H3O+] we obtain the following pH:
[tex]pH=-log(3.07x10^{-4})\\\\pH=3.513[/tex]
Regards!
Of the three Intermolecular forces, the type with the largest dissociation energy is ________.
A. Dipole-dipole interactions
B. Dispersion forces
C. Hydrogen bonds
Answer:
C. Hydrogen bonds
Explanation:
Strongest intermolecular force
Hydrogen Bonding (H-Bonding)
Hydrogen bonds are caused by highly electronegative atoms. They only occur between hydrogen and oxygen, fluorine or nitrogen, and are the strongest intermolecular force.
Answer: C hydrogen bonds
Explanation:
the form of EMR that has less energy per photon than microwaves is ____?
Answer: radio wave frequencies have longer wavelengths and smaller
Energies per photon
what is heterogenous mixture
Answer:
heterogeneous mixture is a mixture that is non-uniform and contains smaller component parts.
Answer:
heterogenous mixture is type of mixture
Explanation:
it is one type of mixture involve in the mixture of different or hetro substance and can also easely separated or seen by naked eye example mixture of water and sand
How does temperature affect the rate constant for a reaction?
Answer:
d
Explanation:
increasing the temperature the fraction of molecules which collide with energy greater than Ea increase and hence the rate constant
The second law of thermodynamics can be worded in different ways, such as a.) heat can flow spontaneously from a hot object to a cold object, or b.) the total entropy of any system plus that of the environment increases as a result of natural processes. Why are these statements equivalent
Answer:
Explanation:
The principal reason why these statements are equivalent and identical is that there can be a progressional flow of heat from a hot object item to a cold object because of this entropy is increasing and expanding Δg < 0 but stream flow from cold to hot is nonspontaneous as Δg > 0.
e.g [tex]dS = \dfrac{\delta Q}{T}[/tex]
As found in heat engines and refrigerators.
Four students are gathering information on elements to determine their identity.
Student 1 counts both neutrons and electrons.
Student 2 counts the number of neutrons.
Student 3 counts the number of valence electrons.
Student 4 counts the number of protons.
Which of the following students will correctly identify the element based on their
data?
Answer:
Student 4
Explanation:
In the structure of the atom of an element, there are protons, electrons and neutrons. The number of protons in the atom of such element determines the atomic number of the element. For example, if Calcium contains 20 protons, the atomic no of Calcium will be 20. Since this is so, it means that the identity of an element on the periodic table can be known using the number of protons/atomic no.
According to this question, four students are gathering information on elements to determine their identity. Based on the explanation above, it takes only the number of protons = atomic no. of the element to identify it. Hence, student 4, who counts the number of protons will correctly identify the element using his/her data.
g You are given a 1.25 gram mixture of calcium nitrate and calcium chloride. You dissolve this mixture in 200.0 mL of water and add an excess of 0.300 M silver nitrate. You collect and dry the white precipitate which forms and find it has a mass of 0.535 grams. Calculate the percent calcium chloride by mass in the original mixture.
Answer:
16.51%
Explanation:
The reaction that takes place is
CaCl₂(aq) + 2AgNO₃(aq) → 2AgCl(s) + Ca(NO₃)₂(aq)Meaning that the white precipitate that formed is AgCl. Now we convert 0.535 g of AgCl into moles, using its molar mass:
0.535 g ÷ 143.43 g/mol = 0.00373 mol AgClThen we convert 0.00373 moles of AgCl into moles of CaCl₂, using the stoichiometric coefficients:
0.00373 mol AgCl * [tex]\frac{1molCaCl_2}{2molAgCl}[/tex] = 0.00186 mol CaCl₂We convert moles of CaCl₂ into grams, using its molar mass:
0.00186 mol CaCl₂ * 110.98 g/mol = 0.206 gFinally we calculate the percent of CaCl₂ by mass in the original mixture:
0.206 g / 1.25 g * 100% = 16.51%The percent calcium chloride by mass in the original mixture is 16.4%
The equation of the reaction between calcium nitrate and silver chloride is:
[tex]\mathbf{CaCl_2 + 2AgNO_3 \to 2 AgCl+Ca(NO_3)_2}[/tex]
Given that;
the weight mass of the white precipitate formed is = 0.535 gramsthe number of moles of the precipitated AgCl is:
= 0.535 g / 143.32 g/mol
= 0.0037 moles
From the above reaction, If 2 moles of AgCl are formed by 1 mole of CaCl2
Then, 0.0037 moles of AgCl will form (0.0037 × 1)/2 moles of CaCl2.
0.0037 moles of AgCl will form 0.00185 moles of CaCl2.
Now, we can say that the number of moles of CaCl2 present in the mixture is = 0.00185 moles
Mass amount of CaCl2 present = 0.00185 moles × 110.98 g/mol
Mass amount of CaCl2 present = 0.205 grams
Finally, the mass percentage [tex]\mathbf{=\dfrac{0.205}{1.25}\times 100\%}[/tex]
= 16.4%
Therefore, we can conclude that the percent calcium chloride by mass in the original mixture is 16.4%
Learn more about mass percentage here:
https://brainly.com/question/23991850?referrer=searchResults
A student uses a sample of KOH stock solution and dilutes it to a total of 120 mL. If the diluted solution is 0.60 M KOH and its original concentration was 2.25 M, what was the volume of the original sample? *
1.4 mL
89 mL
32 mL
5.5 mL
(DON'T POST LINKS PLEASE)
Answer:
5.5
Explanation:
i think so?????????
The diluted solution of volume 120 ml has the molarity of 0.60 M. Then, the volume of the original solution with a molarity of2.25 M is 32 ml.
What is molarity ?The molarity of a solution is the ratio of the number of moles of its solute particles to the volume of solution in liters.
To solve the given problem, we can use the formula for dilution:
C1V1 = C2V2
where C1 is the initial concentration, V1 is the initial volume, C2 is the final concentration, and V2 is the final volume.
We are given that the diluted solution has a concentration of 0.60 M and a total volume of 120 mL. We are also given that the original concentration was 2.25 M, and we want to find the original volume.
Using the formula for dilution, we can write:
2.25 M x V1 = 0.60 M x 120 mL
Simplifying, we get:
V1 = (0.60 M x 120 mL) / 2.25 M
V1 = 32 mL
Therefore, the original volume of the KOH stock solution was 32 mL.
Find more on molarity :
https://brainly.com/question/8732513
#SPJ3
Help please it is due soon
Answer:
it's the amount of energy released by an earthquake