what is the ph of a solution that contains 11.7g of nacl for every 200 ml of solution?

The molality of C₂H₅OH in the solution is 6.46 m mol/kg.

To calculate the molality of the C₂H₅OH solution, we first need to determine the amount of C₂H₅OH in the solution. We can do this by using the volume and density of the C₂H₅OH:

m = V * d

where m is the mass, V is the volume, and d is the density.

V = 75.0 mL = 0.075 L

d = 0.789 g/mL = 0.789 g/L

So,

m = 0.075 L * 0.789 g/L = 0.0592 g

Next, we need to convert the mass of C₂H₅OH to moles. The molecular weight of C₂H₅OH (ethanol) is 46.068 g/mol, so:

mol = m / MW

mol = 0.0592 g / 46.068 g/mol = 0.00129 mol

Finally, we can calculate the molality of the solution using the following formula:

molality = moles of solute / mass of solvent (in kilograms)

The total mass of the water solvent is 200.0 mL * 1.0 g/mL = 200.0 g. To convert this to kilograms, we divide by 1000:

mass of solvent = 200.0 g / 1000 g/kg = 0.2 kg

So,

molality = 0.00129 mol / 0.2 kg = 0.00646 mol/kg = 6.46 m mol/kg

Therefore, the molality of C₂H₅OH in the solution is 6.46 m mol/kg.

learn more about molality: https://brainly.com/question/1370684

#SPJ1

A solid that forms and settles out of a liquid mixture is called a precipitate.

The process of changing a dissolved component into an insoluble solid from a super-saturated solution is referred to as precipitation. This process takes place in an aqueous solution. The name given to the solid that forms is precipitate. In the event that an inorganic chemical reaction results in precipitation, the chemical reagent that is responsible for the formation of the solid is referred to as the precipitant. To precipitate in chemistry means to generate an insoluble compound, which can occur either through the reaction of two salts or through a change in temperature that affects the solubility of the compound.

To learn more about precipitate, click here:

https://brainly.com/question/24846690

#SPJ4

The models of the isotopes are shown below.

To draw a model of an isotope, you can represent the nucleus of an atom as a sphere and use colored balls to represent the protons, neutrons, and electrons.

Here are the steps to draw a model of the isotope of an element:

Determine the number of protons, neutrons, and electrons in the isotope. You can find this information from a periodic table or an atomic database.

Draw a sphere to represent the nucleus of the atom.

Use red balls to represent the protons and place them inside the sphere. The number of protons is equal to the atomic number of the element and determines the element's identity.

Use blue balls to represent the neutrons and place them inside the sphere. The number of neutrons can vary in isotopes of the same element.

Use electron shells to represent the electron clouds surrounding the nucleus. Electrons are represented by small, dark spheres and are placed in shells at a certain distance from the nucleus.

Label the isotope with the atomic number, atomic mass, and the number of neutrons.

Learn more about Isotope:https://brainly.com/question/11680817

#SPJ1

The reason why biomass decreases by about 90% at each trophic level moving up is due to the inefficiency of energy transfer between trophic levels.

At each trophic level, organisms consume other organisms to obtain the energy they need to survive. However, as energy is transferred from one organism to another, some of it is lost as heat or used for metabolic processes like respiration, leaving less energy available for growth and reproduction.

The decrease in available energy is reflected in the decrease in biomass, which is the total amount of living matter in an ecosystem. As a result, there is less biomass at each successive trophic level. This pattern is sometimes referred to as the "pyramid of biomass."

In general, only about 10% of the energy available at one trophic level is passed on to the next trophic level, resulting in the 90% decrease in biomass at each level. This inefficiency of energy transfer is a fundamental characteristic of ecosystems and has important implications for the structure and function of ecological communities.

To know more about biomass here

https://brainly.com/question/10405411

#SPJ4

Generally, water is known as the universal solvent.

Water is known as the universal solvent because basically at the molecular level, salt basically dissolves in water due to electrical charges and due to the fact that both water and salt are the compounds which are polar, and with positive and negative charges on opposite sides in the molecule. It is true that universal solvent does not exist. Water is basically known as the universal solvent because it dissolves more chemicals than any other solvent. However, water is the solvent that only dissolves with other polar molecules.

This property of water usually allows the water molecule to become attracted to many other different types of molecules and it behaves as a solvent for every solute.

Learn more about universal solvent from the link given below.

https://brainly.com/question/1834245

#SPJ4

To get the bottom of the meniscus to the volumetric line of the pipette, tilt the pipette slowly and gently while keeping the top of the meniscus level. Make certain that you are gazing at the meniscus at eye level. Finally, add or subtract liquid as needed until the bottom of the meniscus reaches the volumetric line.

Follow these steps to get the bottom of the meniscus to the volumetric line of the pipette:

Fill the pipette with the liquid to be measured by dipping the tip of the pipette in the liquid and bringing it up to the required volume.

Hold the pipette upright and gently pour the liquid out until the meniscus (the curved surface of the liquid) is slightly above the pipette's calibration point.

To adjust the meniscus, use a clean and dry dropper to add or withdraw tiny drops of liquid from the pipette until the meniscus's bottom is at the pipette's calibration mark.

To maintain precision, hold the pipette upright during this operation and add or withdraw the liquid drop by drop.

Once the meniscus has reached the calibration point, you can transfer the liquid to the container of your choice or take any necessary measurements.

When correcting the meniscus, precision is essential since even little deviations might lead to erroneous results. It is also critical to use the correct pipette for the liquid being measured and to follow any special instructions or protocols supplied by your laboratory or project.

For more such questions on pipette, click on:

https://brainly.com/question/13273684

#SPJ4

The factors that determine the direction and rate of a chemical reaction are:

The rate of a chemical reaction is calculated by dividing the rate of change in a reactant's or product's concentration by the coefficient from the equation's balanced state.

The term "rate of a reaction" refers to how quickly a reaction occurs. For instance, because it happens quickly, wood burning has a high reaction rate, whereas iron rusting has a low reaction rate because it happens gradually.

Learn more about chemical reaction at:

https://brainly.com/question/11231920

#SPJ1

The region of the enzyme where the substrate attaches is referred to as the active site because this is where the catalytic "activity" occurs.

The complete question is:

Classify each phrase as describing an enzyme, an active site, or a substrate.

a. A biological catalyst

b. A protein containing an active site

c. A specific enzyme location that binds with the substrate

d. A substance that the enzyme acts upon

e. May be a phosphate group

To learn more about Enzymes, refer to:

https://brainly.com/question/2536131

#SPJ4

The type of polyester that is formed in the reaction between glycerol and phthalic anhydride is known as glycerol phthalate or glyceryl phthalate.

It is a type of thermoplastic polyester that is often used in the production of films, coatings, and adhesives due to its high solubility in many organic solvents. Glycerol phthalate is also commonly used in the pharmaceutical industry as a plasticizer for enteric coatings on oral medications to protect them from the acidic environment of the stomach.

Glycerol phthalate, also known as glyceryl phthalate or glycerol phthalic acid ester, is a type of thermoplastic polyester that is formed by the reaction between glycerol and phthalic anhydride. It is a colorless to pale yellow solid that is soluble in many organic solvents such as acetone, methanol, and chloroform.

Learn more about polyester here:

https://brainly.com/question/11112056

#SPJ4

The volume of a 0.00554 mol sample of H2 at a pressure of 23.44 torr and temperature of 557 K is 44.68 L.

The ideal gas law states that PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature in Kelvin. Rearranging this equation for V, we get V = nRT / P. Plugging in the given values, we have:

So, the volume of a 0.00554 mol sample of H2 at a pressure of 23.44 torr and temperature of 557 K is 44.68 L.

Learn more about Volume:

https://brainly.com/question/27710307

#SPJ4

Taking into account the reaction stoichiometry and the definition of ideal gas law, 46.782 grams of Na was needed to react completely with 15.8 liters of chlorine gas at 303 Kelvin and 1.60 atmospheres

In first place, the balanced reaction is:

2 Na + Cl₂ → 2 NaCl

By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:

The molar mass of the compounds is:

By reaction stoichiometry, the following mass quantities of each compound participate in the reaction:

An ideal gas is a theoretical gas composed of a set of point particles with random displacement, which do not interact with each other.

The pressure, P, the temperature, T, and the volume, V, of an ideal gas, are related by the ideal gas law:

P×V = n×R×T

Where:

In this case, you know:

Replacing in the ideal gas law:

1.6 atm×15.8 L = n×0.082 (atmL)÷(molK)× 303 K

Solving:

[1.6 atm×15.8 L]÷ [0.082 (atmL)÷(molK)× 303 K]= n

1.017 moles= n

1.017 moles of Cl₂ react.

The following rule of three can be applied: If by reaction stoichiometry 1 mole of Cl₂ reacts with 46 grams of Na, 1.017 moles of Cl₂ reacts with how much mass of Na?

mass of Na=

mass of Na= (1.017 moles of Cl₂× 46 grams of Na)÷1 moles of Cl₂

mass of Na= 46.782 grams

Finally, 46.782 grams of Na are required.

Learn more about the reaction stoichiometry:

brainly.com/question/24741074

#SPJ1

ATP synthesis is coupled to the proton motive force through oxidative phosphorylation, where a phosphate group is added to ADP.

The proton motive force is also in the transport of various substances across the membrane. Oxidative phosphorylation is dependent on the tricarboxylic acid cycle, and to a lesser extent on pathways such as glycolysis, to provide the "driving force" in terms of NADH and FADH₂ for the electron transport chain. The proton gradient created by proton pumping during the electron transport chain is used to synthesize ATP. When the protons flow through a channel in enzyme, this movement spins the protein, similar to wind drives a turbine. The mechanical movement of these protein roter provides the energy to add an inorganic phosphate group to adenosine diphosphate (ADP) to form ATP.

To learn more about oxidative phosphorylation, refer:

https://brainly.com/question/13254827

#SPJ4

Before shearing teeth, four limbs, an amniotic egg, and fur evolved. Claws that retract after shearing teeth have been produced.

According to the "inside-out" idea, teeth first developed from endoderm as pharyngeal teeth in jawless vertebrates and then travelled anteriorly into the oral cavity as jaws developed.

These are technically the "roaring cats," which include tigers, lions, jaguars, and leopards. They all have fully retractable claws, just like domestic or pet cats. This adaptation or trait makes sure that when their claws are not being utilized to seize prey, climb, scratch, or give traction, they are covered by a sheath of skin and are not visible.

To learn more about shearing teeth visit:

brainly.com/question/28842189

#SPJ1

CaCl₂ 1 moles lower the freezing point of water more than 1 mol of NaCl because of the amount of dissolved particles determines the colligative qualities.

Colligative qualities are inversely proportional to the quantity of dissolved particles, hence the solution with the highest concentration of dissolved particles will exhibit the largest divergence. When NaCl dissolves, two ions, Na+ and Cl, are produced.

However, CaCl₂ disintegrates into three ions when it dissolves: one Ca²⁺ion, two Cl ions. CaCl₂ will therefore have a 50% greater effect on the freezing point depression than NaCl, mole for mole.

This explanation is overly straightforward. In actuality, you have to take ions' impact on ice and water's equilibrium into account.

factor van't Hoff

Tfreeze = I m Kf provides the freezing point depression.

where

Tfreeze= the change in temperature

I = the van't Hoff factor

for example, NaCl has two particles, CaCl₂ has three, and urea CO(NH₂)₂ has just one particle because it does not dissociate in water)

m= the concentration of the freezing solution

Kf is  cryoscopic constant of the solvent

Learn more about freezing point at https://brainly.com/question/3121416

#SPJ4

Answer:

Question does not show the problem in its entirety

Explanation:

Neon (Ne) has an atomic mass of 20.180 u, where "u" stands for atomic mass units. This number is a weighted average of the masses of all naturally occurring neon isotopes.

Since neon has three stable isotopes, it does not degrade over time. They are neon-20 (with a 90.92% abundance), neon-21 (with a 0.26% abundance), and neon-22 (8.82% abundance). An isotope's atomic mass is the sum of the number of protons and neutrons in its nucleus.

Neon-20 has ten protons and ten neutrons, neon-21 contains ten protons and eleven neutrons, and neon-22 contains ten protons and twelve neutrons. To compute the atomic mass of neon, we use the weighted average of its isotopes' atomic masses while accounting for their respective abundances.

We may compute the atomic mass of neon using isotopic abundances and atomic masses as follows:

(0.9092 x 20.000 u) + (0.0026 x 20.000 u) + (0.0882 x 22.000 u) = (20.180 u)

For more such questions on atomic mass, click on:

https://brainly.com/question/30390726

#SPJ4

part a.

The theoretical yield of hydrofluoric acid is 7.97 grams.

part b.

The percent yield of hydrofluoric acid is 86.2%.

The number of moles of HF produced is calculated as :

moles of HF = 0.194 mol × (4 mol HF / 2 mol H2O)

moles of HF = 0.388 mol

The theoretical yield of HF is given as =

moles of HF × molar mass of HF

theoretical yield of HF = 0.388 mol × 20.01 g/mol

theoretical yield of HF = 7.97 grams

We will  compare the actual yield (6.88 g) to the theoretical yield (7.97 grams) in order to  calculate the percent yield:

percent yield = (actual yield / theoretical yield) × 100%

percent yield = (6.88 g / 7.97 g) × 100%

percent yield = 86.2%

Learn more about percent yield at: https://brainly.com/question/2451706

#SPJ1

The heat released by each molecule, in joules, when ethanol undergoes complete combustion exists [tex]2.28 \times 10^{-18} \mathrm{~J}$[/tex].

A substance's heat of combustion, commonly referred to as its calorific value or energy value, is the quantity of heat released when a specific amount of the substance burns.

The number of moles in 1.00 g of ethanol is obtained from;

Mass of ethanol/molar mass of ethanol

Molar mass of ethanol = 46.07 g / mol

Number of moles = 1.00 g} / 46.07 g/mol = 0.022 moles of ethanol

1 mole of ethanol contains 6.022 × 10²³ molecules

0.022 moles of ethanol contains 0.022 moles × 6.022 × 10²³ molecules / 1 mole

= 1.32 × 10²² molecules of ethanol

If 1.32 × 10²² molecules of ethanol release 29.8 × 10³ J of heat

1 molecule of ethanol will release 1 molecule [tex]$\times 29.8 \times 10^{3} \mathrm{~J} / 1.32 \times 10^{2 2$[/tex] [tex]=2.28 \times 10^{-18} \mathrm{~J}$[/tex]

Therefore, the heat released by each molecule, in joules, when ethanol undergoes complete combustion is [tex]2.28 \times 10^{-18} \mathrm{~J}$[/tex].

To learn more about combustion of heat refer to;

https://brainly.com/question/25109613

#SPJ4

CuO is the proper symbol for copper II oxide. Both the copper and the oxygen in the combination have valences of 2.

A compound's chemical formula serves as a representation of its chemical make-up. The components that make up a compound's molecules as well as the ratio in which their atoms join to produce those molecules are revealed by the chemical formula.

Both copper I oxide and copper II oxide cannot be represented by the formula CuO.

An ionic compound's formula takes into account the metal cation's valency and oxidation state, which are typically represented by a Roman numeral in the compound's name.

Cu2O is a more accurate depiction of the complex copper I oxide. This demonstrates that copper has a valency of 1 in the combination and oxygen has a valency of 2.

CuO is the proper symbol for copper II oxide. Both the copper and the oxygen in the combination have valences of 2.

To learn more about compound's formula refer to:

https://brainly.com/question/13058832

#SPJ4

According to kinetic theory of gases, when samples are heated from liquid to gas phase, particles move faster and spread out more. Hence, option a is correct.

According to kinetic theory of gases. Gaseous substances are made of tiny particles called molecules. The molecules within a container are in a state of random chaotic motion during which they collide with  each other.

At, a particular instant, different molecules in a sample of gas may have different velocities and hence, different kinetic energies.  The kinetic energy of molecules is directly proportional to the temperature.

Hence, the the sample  when heated, the molecules acquire higher kinetic energy and they will move apart. Therefore, option a is correct according to kinetic theory.

Find more on kinetic theory :

https://brainly.com/question/15357425

#SPJ1

The temperature of the 45.0 g piece of metal changed from 241 °C to 32.0 °C. is 0.48 j/ 9°C.

Temperature is a measure of the average kinetic energy of the atoms or molecules in the system. The zeroth law of thermodynamics says that no heat is transferred between two objects in thermal equilibrium; therefore, they are the same temperature.

In other words, Temperature is the measure of hotness or coldness of a body measured using Celsius, Kelvin, and Fahrenheit scales. The change in temperature is based on the amount of heat released or absorbed. The S.I unit of temperature is Kelvin. The Temperature formula is given by, Δ T = Q / mc.

To know more about equilibrium visit

https://brainly.com/question/30694482

#SPJ1

The molarity of the solution is 0.16 M. To calculate the molarity, we first need to find the number of moles of sulfuric acid in the solution.

To find the number of moles of sulfuric acid, we divide the mass of sulfuric acid by its molar mass:

17.75 g / 98.08 g/mol = 0.18 moles.

The volume of the solution is 100.0 mL, which is equivalent to 0.100 L. So, the molarity of the solution is 0.18 moles / 0.100 L = 0.16 M.

The molarity of a solution is a measure of the concentration of solute in the solution and is expressed in units of moles per liter (M). In this case, the solution contains 0.16 moles of sulfuric acid per liter of solution.

Learn more about Molarity:

https://brainly.com/question/26873446

#SPJ4

Unlike the rocks of Earth, where many factors contribute to erosion, the main weathering agents on Mars are wind and acid fog.

Because the atmospheric pressure on the planet's surface averages only 610 pascals (0.088 psi), it is slightly lower than the vapor pressure of water at its triple point; warming water on the Martian surface would sublime under average Martian conditions.

When you see reddish stains on rock, you are witnessing oxidation, which is the result of chemical changes caused by oxygen. When iron-containing materials like steel are oxidized, a chemical reaction occurs, causing the material to rust.

Thus, Unlike the rocks of Earth, where many factors contribute to erosion, the main weathering agents on Mars are wind and acid fog.

To learn more about the mars surface, follow the link;

https://brainly.com/question/12611262

#SPJ1

Your question is incomplete, the image of mars surface is attached below:

The reported absorbance of the solutions would have been decreased if deionized water was used to calibrate the spectrometer instead of iron (III) chloride solution.

A spectrometer measures the amount of light absorbed by a solution at a specific wavelength. The absorbance of a solution is proportional to its concentration. When the spectrometer is calibrated with a standard solution, the instrument is adjusted so that the measured absorbance of the standard is equal to a known value.

If the spectrometer is calibrated with deionized water instead of iron (III) chloride solution, the measured absorbance of the solutions would be lower because deionized water has a lower absorbance than iron (III) chloride. The lower absorbance would result in a decrease in the reported absorbance of the solutions.

Learn more about Spectrometer:

https://brainly.com/question/14854785

#SPJ4

The major fossil fuels differ in the amount of carbon dioxide they emit into the atmosphere when burned. from worst to least, these are coal, oil, and natural gas

The major fossil fuels, coal, oil, and natural gas, differ in the amount of carbon dioxide they emit into the atmosphere when burned. Coal is the worst offender, emitting the highest amount of carbon dioxide per unit of energy produced. This is because coal is a carbon-intensive fuel with a high carbon content, and when burned, it releases large amounts of carbon dioxide into the atmosphere.

Oil is the second-highest emitter, but it still emits a significant amount of carbon dioxide. Natural gas is the least emitter of the three, emitting the lowest amount of carbon dioxide per unit of energy produced. However, natural gas is not a sustainable solution for the long term, and the world needs to shift towards renewable energy sources to combat climate change.

Learn more about fossil fuel here

brainly.com/question/29353155

#SPJ4

The number of moles of phosphoric acid is  0.35 moles

A kidney stone is a hard, solid mass that forms in the kidneys or urinary tract. Kidney stones are made up of minerals and salts that are normally found in the urine, but when they become concentrated, they can form solid crystals that can grow in size.

Kidney stones can vary in size and shape, and can be as small as a grain of sand or as large as a golf ball. They can be located anywhere in the urinary tract, from the kidneys to the bladder, and can cause significant pain and discomfort as they pass through the ureters and urethra.

The reaction equation is;

3Ca(NO3)2 + 2H3PO4 → Ca3(PO4)2 + 6HNO3

Number of moles of calcium nitrate = 85 g/164 g/mol

= 0.52 moles

If 3 moles of Ca(NO3)2 reacts with 2 moles of H3PO4

0.52 moles of Ca(NO3)2 reacts with 0.52 * 2/3

= 0.35 moles

Learn more about kidney stones:https://brainly.com/question/29473472

#SPJ1

Alchemy is an ancient practice that is considered to be the precursor to modern chemistry. It was primarily concerned with the transmutation of base metals into gold, the creation of a universal solvent or elixir of life, and the discovery of a universal cure for diseases. Alchemists believed that these goals could be achieved through a combination of chemical processes and spiritual practices.

One of the key concepts in alchemy is the idea of the "philosopher's stone," a substance that was believed to have the ability to turn base metals into gold and grant eternal life. Alchemists spent centuries searching for the philosopher's stone, experimenting with various substances and processes in an attempt to create it.

Although alchemy is often considered to be a pseudoscience, it did contribute to the development of modern chemistry. Many of the techniques and apparatus used by alchemists, such as distillation and the use of laboratory glassware, are still used in modern chemistry labs.

Additionally, alchemists were among the first to discover and isolate many chemical elements, such as phosphorus and mercury.

To know more about Alchemy here:

https://brainly.com/question/5997100#

#SPJ11

Answer:

A.Cations are attracted to anions; anions are attracted to cations.

C.Cations are positive, anions are negative.

Explanation:

Cations are positively charged ions, which are formed when a neutral atom donates an electron or an electron pair for bonding and for reaching a more stable electron configuration.

Anions, on the other hand, are negatively charged ions, which are formed when a neutral atom gains an electron or an electron pair for bonding and for reaching a more stable electron configuration.

Through electrostatics, we know that negatives attract positives and vice-versa (Unlikes attract each other). Hence, Cations tend to strongly attract their counterparts, which are Anions.

Also, cations and anions can be innumerable in any substance.

Eg: Common Salt is a crystal lattice constituted by Na+ Cations and Cl- Anions.

Hence, A & C are the correct options.