The position in extremity from most to least is water, ethanol, ethyl acetic acid derivation, CH3)2CO, 2-butanone, diethyl ether, hexane, and benzene.
From these solvents, ethanol will be totally miscible in water because of its more modest carbon fasten and it's capacity to frame hydrogen bonds.
Water is a polar dissolvable; other polar solvents incorporate CH3)2CO, acetonitrile, dimethylformamide (DMF), dimethylsulfoxide (DMSO), isopropanol, and methanol.
One way you could really work out a dissolvable's extremity is by utilizing its dielectric consistency, which is utilized to quantify how well the dissolvable can part of the way drop the field strength of the electric field of a molecule added to it. The higher the worth of a dissolvable's dielectric consistent, the more polar it will be.
To learn more about solvents here
https://brainly.com/question/30452436
#SPJ4
How many ions would you expect MgBr2 to break down into in water?
a.2
b.3
c.1
d.4
The number of the ions in the MgBr₂ to break down into in the water is the correct option is b. 3.
The ions dissociation of the MgBr₂ is follows :
MgBr₂ ---> Mg²⁺ + 2Br⁻
The MgBr₂ is the ionic compound. The ionic compound are formed between the atoms by the complete transfer of the electrons, The Mg is the metal and it has tendency to donate the electrons and the Br is the non metal and it has tendency to accept the electrons. The Mg donates the electrons and the Br accept the electrons and forms the ionic compound that is magnesium bromide.
To learn more about ions here
https://brainly.com/question/26677814
#SPJ4
NMR signals may consist of a single peak, or they may be __ into several peaks. The number of peaks for a particular signal is called its __.
NMR signals can either be composed of a single peak or many peaks. A signal's multiplicity is defined as the total number of peaks for that signal.
What is meant by NMR signals?Nuclear magnetic resonance spectroscopy, also referred to as magnetic resonance spectroscopy or NMR spectroscopy, is a spectroscopic method for observing the local magnetic fields surrounding atomic nuclei.
The number of distinct types of protons in a molecule is represented by the number of NMR signals. This is the illustration we used to explain NMR spectroscopy: There are five signals in the spectrum, each of which points to a distinct sort of proton.
By counting the amount of distinct hydrogens on one side of the symmetry plane, it is possible to estimate how many signals these molecules emit in a 1H NMR spectrum.
To learn more about NMR signals refer to:
https://brainly.com/question/30583972
#SPJ4
Why is proline often found at places in proteins that are not alpha-helical?
(Select all that apply)
A. Proline, unlike other amino acids, has a fixed angle of rotation around its C(alpha)-C(O) bond.
B. Proline is only found in beta-sheets.
C. Proline has a side chain that is too bulky for alpha-helices.
D. Proline, unlike other amino acids, has a fixed angle of rotation around its C(alpha)-N bond.
E. Proline fits well into beta-turns.
A. Proline, unlike other amino acids, has a fixed angle of rotation around its C(alpha)-C(O) bond.
C. Proline has a side chain that is too bulky for alpha-helices.
E. Proline fits well into beta-turns.
These are the correct options.
What is Amino Acid?
Amino acids are organic compounds that are the building blocks of proteins. They contain both an amino group (-NH2) and a carboxyl group (-COOH), as well as a side chain that is specific to each amino acid. There are 20 different amino acids that are commonly found in proteins, each with a unique side chain that gives it its unique properties. Amino acids are linked together by peptide bonds to form polypeptide chains, which then fold and interact to form functional proteins. In addition to their role in protein synthesis, amino acids also have many other important functions in the body, including serving as precursors for the synthesis of neurotransmitters and other molecules.
Learn more about Amino Acid from given link
https://brainly.com/question/28362783
#SPJ4
How many ions would you expect MgBr2 to break down into in water?2314
When MgBr2 is dissolved in water, it would break down into three ions.MgBr2 is an ionic compound consisting of one magnesium cation (Mg2+) and two bromide anions (Br-).
When MgBr2 is dissolved in water, the water molecules surround and separate the ions from each other. This process is known as hydration. The magnesium cation has a charge of +2, while the bromide anions have a charge of -1 each. Therefore, to achieve overall electrical neutrality, two bromide ions are required for every magnesium ion.
In water, the magnesium cation and bromide anions dissociate from the solid compound and become hydrated, surrounded by water molecules. Since there are two bromide anions per magnesium cation in MgBr2, the compound would dissociate into three ions: one magnesium ion (Mg2+) and two bromide ions (2Br-). Therefore, when MgBr2 is dissolved in water, it would break down into three ions.
Find more about MgBr2
brainly.com/question/27249833
#SPJ4
What does the captain do when Dr. Livesey stands up to him in chapters 1-3 of Treasure Island?
A. He takes out a knife and stabs Dr. Livesey.
B. He laughs and pours Dr. Livesey a glass of rum.
C. He takes out a knife, but decides to put it away and does nothing.
D. He pours Dr. Livesey a glass of rum, but throws it in his face, pretending it was an accident
The captain when Dr. Livesey stands up to him in Chapters 1-3 of Treasure Island, He pulls out a knife, but decides to put it away and does nothing. The correct answer C.
In chapters 1-3 of Treasure Island, when Dr. Livesey stands up to the captain, the captain initially reacts aggressively by taking out a knife. However, he ultimately decides to put it away and does nothing.
This shows that the captain is a volatile and unpredictable character, but also that he is capable of exercising restraint when necessary..
Learn more about Treasure Island:
https://brainly.com/question/265415
#SPJ11
particles of electromagnetic radiation are called ______, and each has a discrete amount of energy called a ______. since electromagnetic radiation also has wave properties, each particle is also characterized by a specific ______ and frequency.
Particles of electromagnetic radiation are called photons, and each has a discrete amount of energy called a quantum or a photon energy. Since electromagnetic radiation also has wave properties, each photon is also characterized by a specific wavelength and frequency.
According to the equation E = hf, where E is the energy of a photon, h is Planck's constant, and f is the photon's frequency, the energy of a photon is directly proportional to its frequency and inversely proportional to its wavelength.
A type of energy that moves through space at the speed of light is electromagnetic radiation. It is made up of oscillating magnetic and electric fields that are parallel to the wave's propagation direction and to each other.
Magnetic field radiation can have
Learn more about electromagnetic radiation here:
https://brainly.com/question/10759891
#SPJ4
What is the strongest NSAID?
Non-selective COX inhibitors, such as indomethacin, ketorolac, and diclofenac, are often regarded as the most powerful NSAIDs and are frequently used to treat acute pain and inflammation.
Nonsteroidal anti-inflammatory medicines (NSAIDs) are a group of medications used to treat pain, fever, and inflammation. They function by inhibiting the activity of an enzyme known as cyclooxygenase (COX), which is responsible for the production of prostaglandins, a kind of hormone involved in pain and inflammation.
There are several forms of NSAIDs, each with its own potency, dose, and duration of effect. Non-selective COX inhibitors, such as indomethacin, ketorolac, and diclofenac, are often regarded as the most powerful NSAIDs and are frequently used to treat acute pain and inflammation. These medications act by inhibiting both COX-1 and COX-2 enzymes, which can result in more pain relief but also increases the risk of adverse effects.
Some NSAIDs, such as ibuprofen and naproxen, are useful in reducing pain and inflammation but are thought to be less powerful than non-selective COX inhibitors. These medications act by primarily inhibiting COX-2, which reduces the likelihood of certain adverse effects such as stomach ulcers and bleeding.
For more such questions on NSAIDs, click on:
https://brainly.com/question/17173688
#SPJ4
Is the atomic mass of copper is 64?
No, the atomic mass of copper is not 64. The atomic mass of copper is approximately 63.546 atomic mass units (amu).
Copper has an atomic mass of around 63.546 atomic mass units (amu). The mass of all naturally occurring copper isotopes, weighted to account for their respective abundances, is represented by this value.
Copper-63, which accounts for around 69% of naturally occurring copper, is the most prevalent isotope of the metal. Copper-65 makes up the remaining 31%. Copper-63 has an atomic mass of around 62.93 amu, while copper-65 has an atomic mass of roughly 64.93 amu. The resultant atomic mass is roughly 63.546 amu when these two isotopes are averaged together, taking into consideration their relative abundances. Chemically speaking, copper is an element with the symbol Cu and the atomic number 29. It has a very high thermal conductivity and electrical conductivity and is a soft, malleable, and ductile metal.
For such more questions on copper :
brainly.com/question/2289251
#SPJ4
What is an ICE table?
An ICE (Initial, Change, Equilibrium) table is simple matrix formalism that used to simplify the calculations in reversible equilibrium reactions (e.g., weak acids and weak bases or complex ion formation).
In most cases, ICE tables are used to calculate the K, or equilibrium constant expression, of a reaction (in some cases, K may be given, and one or more of the concentrations in the table will be the unknown to be solved for). ICE tables are made up of the concentrations of molecules in solution at various stages of a reaction. The variables and constants required to calculate the unknown are automatically set up and organized in ICE tables.
The first column of the table's titles are abbreviated as ICE.
Initial focus is denoted by the letter I. The initial product and reactant concentrations are listed in this row.
know more about ICE table click here;
https://brainly.com/question/30395953?referrer=searchResults
#SPJ4
What is the molar mass of K2SO4?
The molar mass of K₂SO₄, also known as potassium sulfate, is 174.259 g/mol.
This is calculated by adding the atomic masses of each element in the compound, which are 2 potassium (K) atoms with a combined mass of 78.196 g/mol, 1 sulfur (S) atom with a mass of 32.066 g/mol, and 4 oxygen (O) atoms with a combined mass of 64.997 g/mol.
The resulting sum is 175.259 g/mol, but since the compound has a formula unit of K₂SO₄, we divide by 2 to obtain the molar mass of one unit, which is 174.259 g/mol. The molar mass is an important quantity in chemistry as it allows for conversion between mass and moles of a substance, which is crucial for chemical reactions and stoichiometry.
To know more about the molar mass, here
brainly.com/question/22997914
#SPJ4
Why is a direct comparison of station pressures difficult? 1. Station pressures change abruptly over small horizontal distances even when there is no appreciable change in elevation. 2. Weather stations are often at different altitudes 3. Aneroid barometers are extremely inaccurate 4. All of the above
The pressure that can be measured at a particular height and is considered to be a location's actual barometric pressure is called station pressure.
What are the benefits of pressure altitude?Aircraft performance and flight levels are both based on pressure altitude, which is crucial for aircraft operating at or above 18,000 feet. Pressure altitude is adjusted for non-standard temperature to produce density altitude.
The pressure that can be measured at a particular height and is considered to be a location's actual barometric pressure is called station pressure. In radio and television broadcasts, the pressure reading that is most frequently heard is the altimeter setting. The barometric pressure at a station is not accurate.
Even when there is no discernible change in elevation, station pressures quickly shift across short horizontal distances.
The station pressure, which is the actual barometric pressure of a location, is the pressure that is measured at a particular elevation. The pressure indication that is most frequently heard in radio and television broadcasts is the altimeter setting. It is not the station's actual barometric pressure.
Therefore, the correct answer is option 4. All of the above.
To learn more about pressures refer to:-
brainly.com/question/30482677
#SPJ4
select all the attractive forces associated with solid nacl salt.a. Ion-Dipole b. H-Bonding c. London Disperson d. Dipole-Dipole e. Lonic Bonding
Ion-dipole is the attractive force connected to solid NaCl salt.
Define covalent bond.
While hydrogen bonds are intermolecular forces between the hydrogen atoms linked to a nitrogen, oxygen, or fluorine of one molecule and a negative dipole of another, covalent bonds are intramolecular forces that are often between two nonmetals.
These intramolecular forces are created by the ionic interactions that exist between the sodium cation and the chloride anion in the inorganic salt sodium chloride. Electrostatic attraction between oppositely charged ions causes them to coalesce into molecules. Ions are created when a species either loses or gets electrons to create a positively charged ion (also known as a cation) or a negatively charged ion (also known as an anion). Ion-dipole interaction is demonstrated by the interaction of a Na+ ion with water (H2O).
To learn more about Ion-dipole, use link below:
brainly.com/question/28098528
#SPJ1
What type of compound is NaNO3?
The chemical name for NaNO3 is Sodium Nitrate. It appears as a white crystalline solid. It is the nitrate of sodium.
The formula for Sodium nitrate is NaNO3. It appears as a white crystalline solid. It is noncombustible. It accelerates the burning of combustible materials. Sodium nitrate leads to explode under prolonged exposure to heat or fire. It is used in the solid propellants, explosives, fertilizers. It is classified as the inorganic nitrate salt of sodium. Sodium nitrate has a role of the fertilizer. It is called as an an inorganic sodium salt and an inorganic nitrate salt. This is the nitrate of sodium. It is used in the fertilizers, pyrotechnics as a food preservative. It is used as a solid rocket propellant and also in glass and pottery enamels.
To learn more about Sodium nitrate salt please visit:
https://brainly.com/question/24256699
#SPJ4
Part A Properly using a centrifuge requires that several important steps be performed correctly. Choose the three main steps in properly using this piece of equipment. a. Using a test tube with approximately the same volume as your sample tube to balance the centrifuge b.Placing the test tubes side by side for best separation. c. Stop the roation of the centruluge by using a paper towel or stopper until stopped d. Using the exact same type of test tube and solution in 3-4 test tubes. e. Ensuring the centrifuge is completely stopped before removing samples f. Placing the test tubes across from each other to balance out the centrifuge.
Placing the test tubes across from each other to balance out the centrifuge.
Using a test tube with approximately the same volume as your sample tube to balance the centrifuge
Ensuring the centrifuge is completely stopped before removing samples
How do you use a centrifuge?Ensure that the centrifuge is clean, balanced, and in good working condition. Select the appropriate rotor and tube size for the sample, and check the maximum speed and time limit of the centrifuge.
Close the centrifuge lid securely, and ensure that it is locked in place. Failure to properly secure the lid can result in the rotor becoming unbalanced and dangerous.
Learn more about centrifuge:https://brainly.com/question/17065689
#SPJ1
How many lone pairs does CH3OH have?
CH3OH has two lone pairs, both of which are on the oxygen atom.
The core atom in CH3OH (methanol) is carbon (C), which possesses four valence electrons. Methanol is made up of three hydrogen atoms, one carbon atom, and one oxygen atom. Since oxygen has six valence electrons and likes to create two covalent bonds with other atoms, oxygen forms two single bonds with the carbon atom in methanol.
Each of methanol's three hydrogen atoms creates a single connection with the carbon atom. This leaves the oxygen atom with two pairs of unshared electrons, or lone pairs, one on each side. These two lone pairs on the oxygen atom form no chemical connections with the other atoms in the molecule.
For more such questions on lone pairs, click on:
https://brainly.com/question/3915115
#SPJ4
Label the oxidation-reduction and ion-exchange processes involved in the diagram with suitable equations.
The oxidation-reduction and ion-exchange processes involved in the diagram are as follows:
oxidation-reduction: Ca ---> CaOoxidation-reduction: Ca ---> CaCl₂ ion-exchange: Ca(OH)₂ ---> CaCl₂ ion-exchange: CaCl₂ ---> AgClWhat are oxidation-reduction reactions?Oxidation-reduction or Redox reactions involve a shift in the oxidation state of the substrate. When electrons are lost or the oxidation state increases, it is called oxidation; when they are gained or the oxidation state decreases, it is called reduction.
Ion exchange is a chemical reaction in which different ions with similar charges in solution are swapped for free mobile ions of a solid, the ion exchanger.
Learn more about oxidation-reduction reactions at: https://brainly.com/question/21851295
#SPJ1
the nitrogen bases are held together in the center of the molecule by
In the DNA ,the nitrogen bases are held together in the center of the molecule by the hydrogen bond.
The nitrogen bases are held together in the center of the DNA molecule by the hydrogen bond. The hydrogen bond that is the H - bond binds the nitrogen bases in between the two strands of the DNA. There are the two hydrogen bonds that is present in between the A and the T and the three hydrogen bond in between the G and the C.
The hydrogen bond in the DNA held together the nitrogen bases in the center of the molecule.
This question is incomplete, the complete question is :
In the DNA ,the nitrogen bases are held together in the center of the molecule by ?
To learn more about DNA here
https://brainly.com/question/11871151
#SPJ4
What is the name of the compound with the formula Na2SO4?
Answer:
Jagdish is 3 years younger than Resham and Rajesh is 5 years older than Jagdish. If the product of present age of Resham and Rajesh is 960.How old is Jagdish
How do you find functional groups in IR spectrum?
To find functional groups in an IR spectrum, you need to identify characteristic absorption peaks associated with specific functional groups.
This can be done by comparing the observed spectrum to reference spectra or by using IR spectroscopy databases. Common functional groups and their associated absorption peaks include: carbonyl groups (1700-1750 cm^-1), hydroxyl groups (3200-3600 cm^-1), and amine groups (3200-3500 cm^-1).
Additionally, the presence or absence of certain peaks can indicate the presence or absence of specific functional groups. Overall, identifying functional groups in an IR spectrum requires knowledge of the characteristic absorption peaks associated with those groups and the ability to interpret the observed peaks in the context of the molecule being studied.
To know more about the IR spectrum, here
brainly.com/question/29753167
#SPJ4
Help pls Which statement ,begin emphasis,best,end emphasis, describes the change that occurs when a gas becomes a liquid?
Answer options with 5 options
A.
There is a decrease in energy which causes a decrease in molecular motion resulting in a decrease in temperature.
B.
There is a decrease in energy which causes a decrease in molecular motion resulting in an increase in temperature.
C.
There is an increase in energy which causes an increase in molecular motion resulting in an increase in temperature.
D.
There is an increase in energy which causes an increase in molecular motion resulting in a decrease in temperature.
E.
There is a decrease in energy which causes an increase in molecular motion resulting in a decrease in temperature.
Answer:
B
Explanation:
becauuse a decrease in molecular action decrease energy energy leading to increase in temperature temperature
The two atoms in a water molecule are arranged asymmetrically.
a. True
b. False
The given statement is "The two atoms in a water molecule are arranged asymmetrically" is true as the two hydrogen atoms are arranged asymmetrically. The correct option is a.
In the water molecule, the oxygen atom (O) and the two hydrogen atoms (H) are arranged as the asymmetrically. This will produces the dipole, the molecule with the one negatively and the one positively charged end. It will depending on the temperature, the dipoles align themselves in to the aggregates according to the charge, such as, in the formation of the ice crystal.
Water is the polar molecule, this is due to the O-H bond of the water, Oxygen is the more electronegative due to which the partial positive charge and the partial negative charge will created on the hydrogen and the oxygen, this resulting in the dipole moment. Therefore, the correct option is a.
To learn more about water here
https://brainly.com/question/29987675
#SPJ4
Calculate the bond order for one carbon-carbon bond in the benzene molecule, taking σ and π bonding into consideration?
the bond order for one carbon-carbon bond in the benzene molecule, taking σ and π bonding into consideration will be 1.5.
In the benzene molecule, there are 6 carbon atoms arranged in a hexagonal ring, with alternating single and double bonds. Each carbon atom is covalently bonded to two other carbon atoms, with one single bond and one double bond.
To calculate the bond order for one carbon-carbon bond in benzene, we need to take into account both the σ (sigma) and π (pi) bonding. The σ bond is formed by the overlap of two atomic orbitals along the internuclear axis, while the π bond is formed by the overlap of two atomic orbitals perpendicular to the internuclear axis.
In the case of benzene, each carbon-carbon bond has one σ bond and one π bond. The total bond order for each bond can be calculated as the sum of the bond orders for the σ and π bonds. The bond order for a σ bond is 1, while the bond order for a π bond is 0.5.
Therefore, the bond order for one carbon-carbon bond in the benzene molecule is:
Bond order = (σ bond order) + (π bond order) = 1 + 0.5 = 1.5
So the bond order for one carbon-carbon bond in the benzene molecule is 1.5.
Learn more about carbon here:
https://brainly.com/question/3049557
#SPJ4
Classify the steps involved in the formation of a solution as being endothermic or exothermic. Drag the item to the appropriate bin.
Steps which are involved in formation of a solution as endothermic are separation of solute molecules ,separation of solvent molecules and exothermic is formation of solute-solvent interactions.
In thermochemistry, an exothermic response is a "reaction for which the general standard enthalpy change ΔH° is negative." Exothermic responses normally discharge heat. The term is frequently mistaken for exergonic response, which IUPAC characterizes as "... a response for which the general standard Gibbs energy change ΔG° is negative."
A firmly exothermic reaction will as a rule likewise be exothermic on the grounds that ΔH° makes a significant commitment to ΔG°. The greater part of the fantastic substance responses that are exhibited in study halls are exothermic and endothermic. The inverse is an endothermic reaction, which ordinarily takes up heat and is driven by an entropy expansion in the framework.
To know more about exothermic reaction ,visit here:
https://brainly.com/question/10373907
#SPJ4
what happens if you use too much solvent for a recrystallization?
It is important to use the correct amount of solvent for recrystallization to achieve a good yield and a high level of purity of the final product. The correct amount of solvent depends on the solubility of the compound, which can be determined through prior testing and experimentation.
What is Recrystallization?
Recrystallization is a common laboratory technique used to purify solid compounds. The process involves dissolving a solid compound in a solvent, and then allowing the compound to crystallize as the solution cools, thereby separating it from impurities that may be present.
If too much solvent is used for a recrystallization, it can lead to several negative outcomes:
Poor Yield: A very common issue associated with using too much solvent for recrystallization is that it can lead to a low yield. If the amount of solvent is much more than what is needed, the solubility of the compound may increase, and some of the material will remain in the solution rather than crystallizing out. This results in a lower yield of purified crystals.
Low Purity: If too much solvent is used, it can result in the formation of smaller or less pure crystals, as the solubility of impurities may also increase. When the solvent cools and the crystals form, the impurities can become trapped within the crystal structure or coat the surface of the crystals, reducing their purity.
Increased Time and Effort: Using too much solvent can also increase the time and effort required for recrystallization. Since more solvent is needed to dissolve the compound, it takes more time to heat and dissolve the compound. Additionally, more solvent also means longer filtration and drying times, which can prolong the purification process.
Increased Costs: Using too much solvent can increase the cost of the process as it requires more solvent and more energy to heat and evaporate the solvent.
Learn more about Recrystallization from given link
https://brainly.com/question/10194206
#SPJ4
What is important to remember when using oil immersion?
It's important to utilise immersion oil that is properly matched when employing oil aims. Use only oil that is advised by the unbiased manufacturer.
What is oil immersion?In the absence of oil, light waves bounce off the slide specimen and travel through the glass cover slip, across the atmosphere, and into the microscope lens . When a wave encounters a new substance, unless it exits at a 90-degree angle, it bends, with the amount of bend depending on the angle. The result warps the image. Oil has a more glass-like index of refraction than does air, which results in a smaller bend. Air has a considerably different index of refraction from glass. An oil-immersed lens can be almost as effective as one made completely of glass because specially prepared oil can have a refractive index that is nearly identical to that of glass (which would be impractical).
Transparent oils with particular optical properties called immersion oils.
Learn more about oil immersion here: https://brainly.com/question/8291439
#SPJ4
Definition- a depiction of valence electrons around the symbol of an element- a diagram that shows valence electrons as dotA. Metalic BondsB. Electron Dot StructureC. Valence ElectronD. Coordination Number
The depiction of valence electrons around the symbol of an element as dots is called an "Electron Dot Structure". Option B is the correct answer.
The Electron Dot Structure, also known as Lewis dot diagram, is a shorthand notation that represents the valence electrons of an atom as dots surrounding the atomic symbol.
The number of valence electrons is determined by the group number of the element in the periodic table. The Electron Dot Structure is used to predict the chemical bonding behavior of an element and to understand the basic properties of compounds formed from those elements.
To know more about the Electron Dot Structure, here
brainly.com/question/9840379
#SPJ4
What are the 12 types of chemical reactions?
The re are following 12 types of chemical reactions are:
1. Thermal Decomposition Reaction - A → B + C
2. Decomposition Reaction - AB → A + B
3. Single Displacement or Substitution Reaction - A + BC → B + AC
4. Double Displacement or Metathesis Reaction - AB + CD → AD + CB
5. Redox Reaction or Oxidation-Reduction Reaction - A + B → AB or A + B → A + B
6. Acid-Base Neutralization Reaction - HX + MOH → MX + H2O
7. Precipitation Reaction - AB + CD → AD + CB (formation of a solid)
8. Neutralization Reaction - Acid + Base → Salt + Water
9. Photochemical Reaction - A + hν → B + C
10. Combination or Synthesis Reaction - A + B → AB
11. Electrolysis Reaction - AB → A + B
12. Biological Reactions - Photosynthesis, Respiration, Digestion, etc.
It is important to say that some of these reactions may overlap or happens simultaneously.
To know more about Chemical reactions:
https://brainly.com/question/29762834
#SPJ4
The enthalpy of formation of gaseous carbon dioxide is −393.5 kJ/mol. What is the equation that represents the formation of gaseous carbon dioxide?
The equation representing the formation of gaseous carbon dioxide is: CO2 (g) = C (s) + O2 (g).
The enthalpy of formation of a substance is the amount of energy required to form one mole of that substance from its constituent elements in their standard states. In the case of gaseous carbon dioxide, the enthalpy of formation is −393.5 kJ/mol. The equation representing the formation of gaseous carbon dioxide is:
CO2 (g) = C (s) + O2 (g)where C represents elemental carbon in its solid form and O2 represents elemental oxygen in its gaseous form.
This equation shows that one mole of carbon dioxide is formed from one mole of solid carbon and one mole of gaseous oxygen. The negative sign in the enthalpy of formation value indicates that energy is released in the formation of gaseous carbon dioxide from its constituent elements.
Learn more about gaseous carbon dioxide:
https://brainly.com/question/11867819
#SPJ4
Calculate the molar mass of oxalic acid (C = 12u, O = 16u, H = 1u)
The molar mass of a molecule say oxalic acid, C₂H₂O₄ is equals to the ninety grams per mole, i.e., 90 g/mol.
Molar mass of any molecule is the addition of the masses of the individual atoms present in that molecule within the quantities in which it is present. We have a molecule of oxalic acid and we have to calculate it's molar mass. Oxalic acid is a organic molecule consisting of carbon, hydrogen and oxygen. The molecular formula for oxalic acid is C₂H₂O₄. The atomic mass of oxalic acid is the sum of atomic mass of 2 carbon atoms, 2 hydrogen atoms, and 4 oxygen atoms. Now atomic mass of carbon (C) atom = 12 g/mol, Atomic mass of Hydrogen (H) = 1 g/mol, and Atomic mass of oxygen (O) atom = 16 g/mol.
The molar mass of oxalic acid = (2 (C) + 2 (H) + 4 (O) )g/mol
Molar mass of oxalic acid = (2 (12) + 2 (1) + 4 (16)) g/mol
= 24 + 2 + 64 g/mol
= 90 g/mol
Hence, the required molar mass of oxalic acid is 90 grams per mole.
For more information about Molar mass, visit :
https://brainly.com/question/837939
#SPJ4
what is calcium element symbol?
Answer:
Ca
Explanation:
Element number 20