What is the name of the ionic compound formed from lithium and bromine?

Why is the answer lithium bromide? What is the indicator that this is the correct name, rather than lithium bromate? Is this because a compound would need to contain 3 different atoms and oxygen to have the name lithium bromate? Is that why NaNO3 is Sodium Nitrate?

Note that if the water volume (ML) in a graduated cylinder is 30.0 and the volume of a drop of water is 1.00 and the number of drops is 15, the average drop volume (ML) is 2.0 mL.

Average drop volume is a measurement of a droplet's average volume. It is employed in a wide range of applications, including laboratory experimentation, medical research, and medication delivery systems.

It aids in deciding the proper amount of liquid to utilize in a certain condition. It also aids in the creation of novel pharmaceuticals and assuring exact and constant dosing in medical treatments.

You may calculate the average drop volume by dividing the total amount of water (30.0 mL) by the number of drops (15). That is to say:

(30.0 mL divided by 15 drops = 2.0 mL/drop)

Hence where the number of drops is 15mL and the volume of one drop is 1.00mL, the average Volume of a Drop is 2.0mL

Learn more about graduated cylinder:
https://brainly.com/question/14427988
#SPJ1

Answer:

Clastic or detrital sedimentary rocks are made from pieces of bedrock, sediment, derived primarily by mechanical weathering.

Explanation:

Answer:

The minimum amount of NaOH(aq) solution needed to add is 0.0560 L. This can be calculated by using the following equation:

Moles of Cd2+ = 0.0220 M x 0.300 L = 0.0066 mol

Moles of NaOH = 0.0066 mol x 2 = 0.0132 mol

Volume of NaOH = 0.0132 mol/1.25 M = 0.0560 L

Explanation:

Answer: ew i hate science but ive done that same thing before i dont remember the answers though

Explanation:

Answer:

Osmosis is taking place in the vessel, where a 10% solution of sodium chloride is on one side of the semipermeable membrane and a 2% solution of sodium chloride is on the other side. Osmosis is a special case of diffusion, where water moves from an area of higher concentration to one of lower concentration. In this case, water will move from the 10% solution to the 2% solution, as it has a higher solute concentration. This process is known as osmoregulation and it involves maintaining salt and water balance across membranes within the body’s fluids. The key to remember about osmosis is that water flows from the solution with the lower solute concentration into the solution with higher solute concentration. As such, in this case, water will flow from the 2% solution to the 10% solution.

Explanation:

Grams of aluminum that will be produced if 1.0 g of Ba react with 1.80 g of Al2(SO4)3 will be 0.28g Al. Hence option c) is correct.

A balanced equation is a chemical equation where mass is conserved and there are equal numbers of atoms of each elements on both the sides of equation.

Given, 1.80 g of Al2(SO4)3 and 1.0 g of Ba

So, (1.8 g)/(341.96 g) = 0.00526 moles of Al2(SO4)3

And, 1 mole = 341.96g Al2(SO4)3

Now, (0.00526 moles of Al2(SO4)3)*(2 moles of Al)

= 0.01052 moles of Al

So, (0.01052 moles of Al)*(27 grams of Al)

= 0.28g Al

Hence, option c is correct.

To know more about balanced equation, refer

https://brainly.com/question/26694427

#SPJ1

In order to react with 467.08 grams of O2, 4034.95 g of toluene (C6H5CH3) is required.

Toluene is a white liquid hydrocarbon found in petroleum and coal tar that is employed like a solvent and in the synthesis of organic compounds. Toluene is a naturally occurring substance found in crude oil and is used for oil refining as well as the production of glues, lacquers, paints, and explosives. Toluene can be discovered in household products like paint, paintbrush cleaner, nail polish, glue, inks, and stain removers.

For the balanced equation

2C6H5CH3 + 3O2 → 7CO2 + 4H2O

We required three steps

1.) Convert mass of O2 to mol of O2

mole = mass / molar mass

2.) Find mole of C6H5CH3 by multiply mol O2 by the mol ratio between O2 and C6H5CH3 in balanced equation.

3.) Find mass C6H5CH3 by multiply mol C6H5CH3 by its molar mass (92.14 g/mol)

= 467.08 gm /15.999 gm × 3/ 2 ×92.14 gm

= 4034.95 gm. of C6H5CH3

To know more about Toluene visit :

https://brainly.com/question/6181289

#SPJ1

Answer:

Volume is how much space the object is taking up, whereas mass is the measurement of the amount of matter in the object.

Explanation:

Answer:

it should be chlorine gas

Explanation:

A change in the size of the moon jellies' resource population can change the number of births in the moon jelly population because the big size of the resources can produce more births.

When there is more energy storage molecules present in the moon jellies, they can reproduce more, in more births. Fewer deaths would also lead to the jelly population increasing. The sea turtle population, and the moon jellies consumer population is also decreased.

There must be a change to the birth rate or the death rate in the moon jelly population. Within a population, organisms are born and dying continuously. If the number of births and deaths in a given time interval are equal, then the population size will remain stable.

So we can conclude that a large population of resources will lead to more births.

Learn more about jellies here: https://brainly.com/question/25630111

#SPJ1

7.9 g/cm3 is the density of iron.  There are three possibilities: 1.3 × 103 g 2.3 × 10-2 g 4.3 × 102 g 2.1 × 104 g 1.4 g.

Iron has a density of 7.874g/cm3.

At atmospheric pressure, different substances have their typical densities.

The mass per unit volume is the definition of density. Mathematically speaking, its intense attribute is defined as mass divided by volume:

ρ = m/V

The total mass (m) of a material divided by the total volume (V) . it occupies is how a substance is defined as having a density (). The kilogram per cubic meter (kg/m3) is the metric unit used by the SI. The pounds mass per cubic foot (lbm/ft3) measurement is used in Standard English.

Compressibility (also known as the coefficient of compressibility is a measure of the relative volume change of a fluid or solid as a response to a pressure (or mean stress) change.

Learn more about density of iron: https://brainly.com/question/11293588

#SPJ1

the mass of nitric oxide produced by the reaction of 8.4 g of oxygen gas is 4.32 g. ammonia chemically reacts with oxygen gas to produce nitric oxide and water.

Common uses of oxygen include production of steel, plastics and textiles, brazing, welding and cutting of steels and other metals, rocket propellant, oxygen therapy, and life support systems in aircraft, submarines, spaceflight and diving.

Oxygen helps organisms grow, reproduce, and turn food into energy. Humans get the oxygen they need by breathing through their nose and mouth into their lungs. Oxygen gives our cells the ability to break down food in order to get the energy we need to survive.

To know more about oxygen visit

#SPJ1

The electronic configuration which represents a transition element is 1s²2s²2p⁶3s²3p⁶4s²3d⁷

Transition elements are placed between the metallic S-block elements and nonmetallic P-block elements in the periodic table. They are D-block elements and have features similar to both metals and nonmetals, to some extent. This is why they are called transition elements.

One remarkable feature of these elements happens during the addition of electrons to them. Contrary to S and P-block elements, electrons are added to the penultimate shell, not the last shell. These elements often feature partially filled d-orbitals and have multiple oxidation states.

To learn more about transition element click here:

brainly.com/question/2102444

#SPJ1

Natural vegetative propagation uses bulbils, aerial shoots, roots, underground stems, and subaerial stems. Utilizing unique vegetative components, artificial vegetative propagation is accomplished.

The production and growth of a new plant through asexual means or from a plant fragment is known as vegetative propagation. There is no gamete production or fertilization throughout the process of propagation.

In this procedure, tubers—modified roots—grow into new plants. In some plant species, adventitious buds even grow on the roots. If the correct circumstances are present, these buds develop into new plants or sprouts. Sweet potato and dahlia are two examples.

To learn more about vegetative propagation visit:

brainly.com/question/1213600

#SPJ1

All the EM waves travel at the same speed. The equation for speed is frequency (v) times the wavelength (λ). Speed of light equals 300000 km/s. Hence one number goes to 3 × 10⁸ m and other number is 1 s⁻¹.

Electromagnetic waves are waves moving without a medium through vacuum. They are accompanied with an electric field and magnetic field. The speed of an electromagnetic wave is the product its wavelength and frequency.

c = νλ

Therefore, the given passage can be filled as follows:

All the EM waves travel at the same speed. The equation for speed is frequency (v) times the wavelength (λ). Speed of light equals 300000 km/s. Hence one number goes to 3 × 10⁸ m and other number is 1 s⁻¹.

All EM waves are energetic.  The higher the frequency the more energy in the wave.

Find more on electromagnetic waves:

https://brainly.com/question/3101711

#SPJ1

Answer:

Explanation:

1) The following balanced chemical equations are for based on the combustions of various fuels. Calculate the heats of combustion for each reaction a. C₂H₂OH + ...

Answer:

a whole new world too be into

Explanation:

Based on the formula to determine the freezing point depression of the solvent, the freezing point of the solution is 263.85 K.

The freezing point of a substance is the temperature at which the liquid changes to solid without any further decrease in temperature occurring during the process.

The addition of solute substances in liquids usually lowers the freezing point of the liquid solvent.

The formula to determine the freezing point depression of solvent is given below:

where'

The molality of the given solution = moles of solute/kg of solvent

moles of solute = 46/92

mass of solvent = 100 g or 0.1 kg

Molality of solution = (46/92) / 0.1

Molality of solution = 5

for glycerine, i = 1

ΔT = ΔT = 1 * 1.86 * 5

ΔT = 9.3

The freezing point of the solution = 273.15 - 9.3

The freezing point of the solution = 263.85 K

Learn more about freezing point depression at: https://brainly.com/question/30093044

#SPJ1

Answer:

Volume of O₂ = 200cm³

Explanation:

Rate of diffusion of gas is directly and inversely proportional to the volume and time taken for the gas to diffuse completely.

Volume

R = -----------

time

let R₁ represent the rate at which the given volume of hydrogen gases diffuses and R₂ represent the rate at which the the volume of the oxygen gas diffused.

V₁, V₂, T₁ and T₂ follows the same process

If the two gases diffuses at the same rate, then;-

R₁ = R₂

V₁ V₂

---------- = ------------

T₁ T₂

V₂

10 = ----------------

20

V₂ = 20•10

V₂ = 200cm³

Therefore, the volume of oxygen that could diffuse in 20 seconds is 200cm³

The concentration terms are molality, normality and mole fraction. Molarity can be used to find out the ionic strength of any solution. Therefore, 0.025  is the number of moles of K+ ions are present in 250 mL of a 0.4M KCl solution.

Molarity can be calculated by dividing number of moles of solute by volume of solution in litre. Molarity is affected by temperature. Its unit is mole/liter. It measure the concentration of any solute in a solution.

Mathematically,

Molarity= number of moles of solute/volume of solution in litre

Substituting values in equation 1

0.4M=number of moles of solute/0.25

number of moles of solute=0.025moles

Therefore, 0.025  is the number of moles of K+ ions are present in 250 mL of a 0.4M KCl solution.

Learn more about Molarity, here:

https://brainly.com/question/16727614

#SPJ1

1 mole of magnesium atoms will react with 2 moles of oxygen molecules. This is because the chemical equation for the reaction between magnesium and oxygen is: Mg + O2 → MgO.

A chemical equation is a symbolic representation of a chemical reaction, showing the reactants (starting materials) on the left side and the products (resulting substances) on the right side. The symbols used to represent the reactants and products are chemical formulas, which use the symbols of the elements in the reaction. The arrow between the reactants and products indicates the type of reaction taking place. The coefficients next to the symbols and formulae of entities indicate the number of moles of each species that are involved in the reaction. The overall reaction is balanced when the number of atoms of each element on the left side of the equation is equal to the number of atoms of that element on the right side of the equation.

This equation shows that for every 1 mole of magnesium atoms, 2 moles of oxygen molecules are required for the reaction to take place. Therefore, 1 mole of magnesium atoms will react with 2 moles of oxygen molecules.

To learn more about chemical equation
https://brainly.com/question/13847161
#SPJ1

6) When 10.000 g of a hydrated compound are analyzed in the laboratory, the following analysis is obtained: 1.425 g of water, 5.462 g of lead, 1.266 g of carbon, 1.687 g of oxygen, and 0.160 of hydrogen. What are the name and formula of the compound?

The name and formula of the compound can be determined by analyzing the data given in the question. Based on the information provided, the compound contains lead, carbon, oxygen, and hydrogen. The molecular formula for the compound can be determined by adding up the number of atoms of each element present.

From the data given, the compound contains 1.266 g of carbon, which is equivalent to 1.266/12.01 = 0.105 mol of carbon atoms. It also contains 5.462 g of lead, which is equivalent to 5.462/207.2 = 0.026 mol of lead atoms. The compound also contains 1.687 g of oxygen, which is equivalent to 1.687/16.00 = 0.105 mol of oxygen atoms, and 0.160 g of hydrogen, which is equivalent to 0.160/1.01 = 0.158 mol of hydrogen atoms.

The molecular formula for the compound is therefore Pb(C2H2O2). However, it is also mentioned that the compound is hydrated, which means that it contains water. The 1.425 g of water present in the compound is equivalent to 1.425/18.02 = 0.079 mol of water molecules. The compound 1 likely Pb(C2H2O2)·xH2O, where x represents the number of water molecules present in the compound.

Answer:  Blood alcohol levels at autopsy are valid up to 48 hours after death when simple principles are observed in the collection and storage of samples. Alcohol levels in samples of blood taken from the intact heart are as significant as levels of blood from the femoral veins.

Explanation:

Answer:

If the victim was submerged in water

Explanation:

Answer:

wow okay um so first you go home, get in bed, never open that computer again

Explanation:

The biotic factor of an aquarium ecosystem is algae growing on the glass.

The abiotic factors of an aquarium ecosystem are rock structure, temperature of the water, and amount of sunlight.

The example that describes an abiotic factor interacting with a biotic factor is the amount of sunlight affecting the growth of a plant.

All the listed items in Ms. Brown's class, including gravel, grass, butterfly, sunflower, bird feeder, and flowerpots, are a part of the garden ecosystem.

An ecosystem is a community of living organisms (biotic factors) interacting with each other and with their physical environment (abiotic factors) in a specific area. It includes all the living and non-living components of the environment that interact with each other. Examples of ecosystems include a coral reef, a forest, a desert, and even an aquarium or a garden. Ecosystems can be large or small and can be found on land or in water. They are essential for the survival of living organisms as they provide food, shelter, and other resources necessary for life.

Read more on ecosystem here:https://brainly.com/question/842527

#SPJ1

Answer:

beryllium (Be), magnesium (Mg), calcium (Ca), strontium (Sr), barium (Ba), and radium (Ra).

Alkaline earth metals are those that have two valence electrons in their outermost shell.

Barium (Ba), Radium (Ra), Strontium (Sr), Magnesium (Mg), Calcium (Ca), and Beryllium (Be) are the six alkaline earth metals.

By donating their outermost electrons, they take on the noble gas electron configuration, which increases their stability. When electrons are transferred to an atom with an electronegative charge, the alkaline earth metals get a positive charge.

The second column of the periodic table contains alkaline earth metals, which are very reactive metals. These metals are the building blocks of the entire world. These metals are typically found as sulfates in nature.

A few examples of minerals are gypsum, calcium sulfate, epsomite, magnesium sulfate, barite, and barium sulfate.

to learn more about "Alkaline earth metals" here:

brainly.com/question/27786158

Mass can be calculated by using moles which can be further calculated from multiplication of Molarity to volume. Therefore, the molarity of the HCl solution is 3M. the correct option is option C.

Molarity can be calculated by dividing  number of moles of solute by volume of solution in litre. Molarity is affected by temperature. Its unit is mole/litre. It measure the concentration of any solute in a solution.

Other concentration terms are molality, normality and mole fraction. Molarity can be used to find out the ionic strength of any solution

Mathematically,

2HCl + Ca(OH)[tex]_2[/tex] [tex]\rightarrow[/tex] CaCl[tex]_2[/tex] + 2H[tex]_2[/tex]O

Molarity of HCL× Volume of HCL=Molarity of Ca(OH)[tex]_2[/tex] ×Volume of  Ca(OH)[tex]_2[/tex]

Molarity of HCL× 1.00 L=1.50 M× 2.00 L

Molarity =3M

Therefore, the molarity of the HCl solution is 3M. the correct option is option C.

Learn more about the molarity, here:

https://brainly.com/question/16727614

#SPJ2

Answer:

increasing to decreasing:

F--- S--- Al--- Na--- K

not sure...

Answer:

COVALENT

Explanation:

covalent and is formed by the sharing of two valence electrons.