What is the name of the compound NO2?
Responses
A nitrous oxidenitrous oxide
B nitrogen dioxide

The process of purifying seawater by removing most of its dissolved substances is called desalination.

This process involves removing salt, minerals, and other impurities from seawater, making it suitable for drinking and irrigation.

Desalination is an important technology in arid regions where water is scarce and has become increasingly important globally as the demand for freshwater continues to rise.

There are several methods for desalinating seawater, including reverse osmosis, thermal distillation, and electrodialysis. Each method works by using different physical or chemical processes to separate the salt and other impurities from the water.

The choice of method depends on factors such as the location, the volume of water needed, and the cost of the technology. Regardless of the method used, the goal is to produce water that is safe and suitable for human consumption and other uses.

Therefore, The process of purifying seawater by removing most of its dissolved substances is called desalination.

To know more about desalination refer to:

brainly.com/question/12666368

#SPJ4

These statements contradict each other, hence C is true if and only if one of the three statements is true

Think about the following: C=(p∧q∧¬r)∨(p∧¬q∧r)∨(¬p∧q∧r)

The outer disjunction () is used in this compound statement C, and it states that it is true if and only if one of the three propositions (p∧q∧¬r)∨(p∧¬q∧r)∨(¬p∧q∧r) is true.

First, it is not conceivable for two or three of these statements to be true at the same time. For instance, if  (p∧q∧¬r) and (p∧¬q∧r)are both true, then (r, from the first conjuncture) and (r, from the second conjuncture), respectively, are true, which is a contradiction. The same logic can be used to rule out any other possibility.

To learn more about Contradiction :

https://brainly.com/question/17439687

#SPJ4

The bond resolution includes all covenants between the issuer and the trustee acting for the bondholders (Option D).

A bond resolution is a document that outlines the terms and conditions of a bond issue, including the rights and obligations of the issuer and the bondholders. The bond resolution is typically prepared by the issuer and reviewed by bond counsel.

Covenants between the bond counsel and the bondholders (Option A) may not be included in the bond resolution, but they could be outlined in a separate agreement or memorandum between the bond counsel and the bondholders.

The issuer and the Municipal Securities Rulemaking Board (MSRB, Option C) may not have any direct covenants as the MSRB is a self-regulatory organization for the municipal securities market and does not have a direct role in individual bond issues.

The relationship between the issuer and the bond counsel (Option B) is usually a professional one, where the bond counsel provides legal advice and representation to the issuer in connection with the bond issuance. This relationship is not typically covered in the bond resolution.

Learn more about bond resolution here:

https://brainly.com/question/14554833

#SPJ4

To the volume of 1.76 L, you should dilute 126 ml of a 7.15 m cucl2 solution so that 50. 5 ml of the diluted solution contains 4. 33 g cucl2.

To find the final volume, we should know the concentration of the final solution. This can calculate from the amount of CuCl2 present in 50.5 ml of the diluted solution.

First of all, convert the mass of CuCl2 into moles:

4.33 g CuCl2 / (114.45 g/mol) = 0.038 mol

Now calculate the concentration of the final solution in moles per liter:

0.038 mol / (50.5 ml / 1000 ml/L) = 0.00075 mol/L

Finally, dilute the original solution to the final concentration by multiplying the original volume by the dilution factor:

126 ml * (0.00075 mol/L) / (7.15 mol/L) = 1.76 L

So the final concentration is 1.76 L.

To learn more about dilution factor:

https://brainly.com/question/24881505

#SPJ4

When the 13.99 mL of the HCl of unknown concentration are with the 13 mL of the 2.14 M NaOH, The molarity of HCl is 1.98 M

The balance reaction is as follows :

NaOH + HCl -->  NaCl  +  H₂O

The concentration, M1 = ?

The volume V1 = 13.99 mL

The concentration , M2 = 2.14 M

The volume , V2 = 13 mL

The expression is given as :

M1 V1 = M2 V2

M1 = M2 V2 / V1

M1 = ( 2.14 × 13 ) / 13.99

M1 = 1.98 M

Thus, the molarity of the HCl is 1.98 M.

To learn more about concentration here

https://brainly.com/question/26403608

#SPJ4

Where r is the radius of the cardioid and θ is the angle. Since the equation is in terms of the angle, it is not possible to calculate the area of the region enclosed by one loop of the curve.

An equation is a mathematical statement that uses an equal sign to show that two expressions have the same value. An equation typically consists of two parts, separated by an equal sign. The two parts of the equation can be numbers, variables, or mathematical operations such as addition, subtraction, multiplication, and division. The equation can be used to solve unknown values, such as the value of a variable in a given expression. Equations are an important part of mathematics and are used to model real-world problems and to describe the relationships between different quantities.

To learn more about equation

https://brainly.com/question/28818351

#SPJ4

10:1 , Because this conjugate base is a component of a salt of this acid and a strong base, the solution of acid X and its conjugate base is a buffer solution.

The formula of the conjugate base is the formula of the acid less one hydrogen. The reacting base becomes its conjugate acid. The formula of the conjugate acid is the formula of the base plus one hydrogen ion.

The Henderson-Hasselbalch equation, pH = pKa + log([A]/[HA]), can be used to calculate the pH of a buffer. The equilibrium concentrations of the conjugate acid-base pair utilised to form the buffer solution are denoted by [HA] and [A] in this equation.Because a base's conjugate acid ("B") is "BH," we can abbreviate "the pKa of the conjugate acid of a base" as its pKaH. As a result, the pKaH of pyridine is 5.2 while the pKaH of piperidine is 11.

To know more about conjugate base visit:

https://brainly.com/question/30225100

#SPJ4

The critical path is the path with the longest expected duration. In the given example, the critical path is A-B-C-D-E-F-G-H-I, with an expected duration of 33.44.

This path has the highest duration and the highest variance, meaning that any delays along this path will have the greatest effect on the overall project duration.

The critical path is a key concept in project management, and it is important to understand how it works in order to properly manage a project. The critical path is defined as the longest sequence of activities that must be completed in order for a project to be finished on time.

Learn more about The critical path:

https://brainly.com/question/15131995

#SPJ4

When the extinction coefficient for DHFR (dihydrofolate reductase) is uncertain by +/- 5%, it means that the actual value of the extinction coefficient could be 5% higher or 5% lower than the reported value.

To determine the full range of concentrations that are consistent with this uncertainty, we need to calculate the minimum and maximum values of the extinction coefficient based on the +/- 5% uncertainty.

For example, if the reported extinction coefficient is 10,000 M^-1 cm^-1, Minimum value would be 9,500 M^-1 cm^-1 (10,000 - 500)

Maximum value would be 10,500 M^-1 cm^-1 (10,000 + 500).

The full range of concentrations that are consistent with this uncertainty can then be calculated by using the minimum and maximum values of the extinction coefficient in the appropriate equation. For example, if we are using the extinction coefficient to calculate the concentration of DHFR in a sample, we would use the minimum and maximum values of the extinction coefficient in the calculation to determine the full range of concentrations that are consistent with the +/- 5% uncertainty.

To know more about coefficient click here:

https://brainly.com/question/30066987#

#SPJ11

The compounds in their order of increasing positive character of carbon are: CH₃Li → CH₃F → CH₄ → CH₃NH₂ → CH₃OH.

The positive character of the carbon atom refers to its electropositive nature or its ability to attract electrons towards itself in a chemical bond. This property of the carbon atom can be influenced by the other atoms or groups bonded to it, as well as their electronegativity, size, and electronic configuration.

The positive character of the carbon atom can be determined by various methods, including chemical reactions, spectroscopic measurements, and theoretical calculations.

Find out more on positive carbon character here: https://brainly.com/question/5053007

#SPJ1

In a nitrogen molecule (N2), both nitrogen atoms have an equal distribution of electrons, so neither of them is particularly closer to the negative side.

In a nitrogen molecule (N2), the two nitrogen atoms are arranged in a linear configuration, with a bond angle of 180 degrees. The nitrogen atoms are covalently bonded to each other through a triple bond, which is composed of one sigma bond and two pi bonds. This arrangement results in a symmetrical distribution of electrons around the central nitrogen atom, so neither of the nitrogen atoms can be considered negative or positive.

To know more about electrons, visit:

https://brainly.com/question/12001116

#SPJ4

Answer:

14

Explanation:

the addition of the number of protons and neutrons gives the answer

Seven protons make up the nucleus of nitrogen, which has an atomic number of 7. Since it has a mass number of 14, and we know that it has seven protons.

Furthermore, given that nitrogen has an atomic number of 7, we can infer that it contains seven protons. As a result, the Na atom's atomic number, which is 11, is the same as the sum of its protons and electrons.

The number of protons in an atom's nucleus or the number of electrons in an electrically charged atom is its atomic number unbiased atom An atom of sodium, for instance, has 11 protons and 11 electrons.

To know more about atomic number visit:-

https://brainly.com/question/16858932

#SPJ4

The sole two components of sodium chloride are sodium (Na) and salt, which is chlorine's positively charged ionic form (Cl). Its chemical name is NaCl for this reason.

What makes sodium chloride known as NaCl?

Most people use the term "salt" to refer to sodium chloride, or table salt. Ionic bonds between sodium ions & chloride ions result in the formation of sodium chloride. The formula is NaCl because there is one saline cation (Na+) per each chloride anion (Cl-) (Fig. 1).

Does NaCl accurately reflect the sodium chloride chemical formula? If not, why not?

Because of this, sodium chloride isn't a molecule. The empirical formula for the -1:1 ratio of the various elements is available. There is a chloride particle for every sodium ion. So (Na+Cl)n is the empirical formula of sodium chloride.

To know more sodium about:

https://brainly.com/question/29327783

SPJ4

C. H2O + H3PO4 = H2PO4- + H3O+

The second equilibrium, H2PO42- + H2O = H3PO4 + OH-, is the one that matters the most for figuring out the pH of a sodium phosphate solution.

It is the amount of hydrogen ions (H+) in a solution that determines its pH. Reaction C, H3PO4 + H2O = H2PO4- + H3O+, is the equilibrium reaction in a sodium phosphate solution that has the biggest impact on the concentration of H+ ions. In this reaction, phosphoric acid (H3PO4) is broken down into its conjugate base, H2PO4-, and the hydronium ion, H3O+.

The ratio of H3PO4 to H3O+ in the solution, which is impacted by pH, determines the amount to which this reaction takes place. The concentration of H+ ions and H2PO4- increases as the concentration of H3PO4 in the solution increases because more of it will dissociate into H3O+ and H2PO4-.

Learn more about hydrogen here:

https://brainly.com/question/28937951

#SPJ4

The final pH of the solution formed by mixing 123 ml of 0.300 M HNO3 (nitric acid) and 321 ml of 0.100 M KOH (potassium hydroxide) can be calculated using the concept of neutralization reactions.

In a neutralization reaction, an acid reacts with a base to form a salt and water. The reaction between nitric acid and potassium hydroxide can be written as follows:

The number of moles of HNO3 and KOH can be calculated as follows:

n_HNO3 = (0.123 L) * (0.300 mol/L) = 0.0369 mol

n_KOH = (0.321 L) * (0.100 mol/L) = 0.0321 mol

Since the reaction is a neutralization reaction, the number of moles of HNO3 and KOH should be equal. If the number of moles of HNO3 is greater than the number of moles of KOH, the solution will be acidic, and if the number of moles of KOH is greater than the number of moles of HNO3, the solution will be basic. In this case, the number of moles of HNO3 is greater than the number of moles of KOH, so the solution will be acidic.

The pH of the solution can be estimated using the Henderson-Hasselbalch equation:

pH = pKa + log([A^-]/[HA])

where pKa is the dissociation constant of the acid, [A^-] is the concentration of the conjugate base, and [HA] is the concentration of the acid. For nitric acid, the dissociation constant is about 7, so the pH of the solution can be estimated as follows:

pH = 7 + log([NO3^-]/[HNO3])

To find the exact pH, you would need to use a more sophisticated method, such as a chemical equilibrium simulation or a pH meter.

learn more about ph at:

brainly.com/question/491373

#SPJ4

The moles and the grams of carbon are present in 11.85 g of aspirin C₉H₈O₄ is 0.585 mol.

The chemical formula for the compound = C₉H₈O₄

The mass of the aspirin = 11.85 g

The moles of the aspirin = mass / molar mass

The moles of the aspirin = 11.85 / 180

The moles of the aspirin = 0.065 mol

The moles of the carbon in  aspirin,  C₉H₈O₄ = 9 × 0.065

The moles of the carbon in  aspirin, C₉H₈O₄ = 0.585 mol

Thus, the moles of the carbon atom  is 0.085 in the aspirin that is C₉H₈O₄ compound .

To learn more about moles here

https://brainly.com/question/1895167

#SPJ4

The only electrons flow in the current because the electrons move freely in the structure of the atom.  This is the reason electric current generates by the flow of the electrons.

The free electrons generates the electric current. The free electrons are the valence shell electrons having the weaker force of attraction to the nucleus. This is the reason that they are free to move and they generates the electric current.

The current flows in the direction of the positive to the negative terminal. The electrons are the negative charge species. Therefore, The electrons are attracted to the positive end.

To learn more about electrons here

https://brainly.com/question/30033550

#SPJ4

The average rate of change of the function f(t) = 7 cos(t) over the interval [π/2, π] is 0.

The average rate of change of a function over an interval is the total change in the function value divided by the length of the interval. In this case, the function f(t) = 7 cos(t) goes from a maximum value of 7 to a minimum value of -7 as t increases from π/2 to π, so the total change in the function value is -7 - 7 = -14. The length of the interval [π/2, π] is π - π/2 = π/2. So, the average rate of change over the interval is -14 / (π/2) = -14π/π = -14.

To know more about average rate, visit:

https://brainly.com/question/28739131

#SPJ4

The mole ratio of Al to O2 is 4:3

The reaction is 4Al(s) + 3O2(g) -> 2Al2O3(s)

Four molecules of O2 are used in the reaction.

Twelve oxygen atoms are required in the reaction.

2 moles of Al2O3 are formed in the reaction.

The mole ratio of Al to O2 is 4:3, meaning that 4 moles of Al react with 3 moles of O2 to form 2 moles of Al2O3.

It is important to note that these ratios refer to the stoichiometry of the reaction, which is a measure of the relative amounts of reactants and products involved in a chemical reaction. The stoichiometry of a reaction is a fundamental concept in chemistry and is used to predict the amount of products that will be produced from a given amount of reactants, as well as to understand the underlying mechanisms of chemical reactions.

Learn more about mole:

brainly.com/question/26416088

#SPJ4

To find relative error of molar mass of oxygen gas Calculate the difference between the measured value and the true value, and divide it by the true value and then multiply it by 100%.

Relative error of molar mass of oxygen gas can be calculated as follows:

Determine the true value of the molar mass of oxygen gas, which is the accepted standard value.

Measure the molar mass of a sample of oxygen gas using a suitable instrument such as a mass spectrometer.

Calculate the difference between the measured value and the true value, and divide it by the true value.

Multiply the result by 100% to obtain the relative error as a percentage.

The relative error is an expression of the accuracy of the measurement relative to the true value. A smaller relative error indicates a more accurate measurement. The relative error of molar mass measurements can be affected by several factors, including the quality of the equipment used, the accuracy of the measurement procedure, and the purity of the sample being analyzed.

To know more about Molar mass click here:

https://brainly.com/question/12127540#

#SPJ11

Answer:

Explanation:

:

4. A physician asks the pharmacy to prepare 0.5 L of a 1:5000 epinephrine solution. The available solution is 1:1000. How many milliliters of sterile water should be added to 125 mL of sucrose so the resultant solution is a 4% solution?

A:

a. 21.5 mL b. 50 mL c. 3125 mL d. 31.25 mL

The mass of the precipitate, Ag₂SO₄ obtained is 2.34 g

Determination of the mole of Na₂SO₄

Volume of Na₂SO₄ = 100 mL = 100 / 1000 = 0.1 L

Molarity of Na₂SO₄ = 0.1 M

Mole of Na₂SO₄ =?

Mole = Molarity x Volume

Mole of Na₂SO₄ = 0.1 × 0.1

Mole of Na₂SO₄ = 0.01 mole

Determination of the mole of AgNO₃

Volume of AgNO₃ = 150 mL = 150 / 1000 = 0.15 L

Molarity of AgNO₃ = 0.1 M

Mole of AgNO₃ =?

Mole = Molarity x Volume

Mole of AgNO₃ = 0.1 × 0.15

Mole of AgNO₃ = 0.015 mole

Determination of the limiting reactant

Na₂SO₄ + 2AgNO₃(aq) → Ag₂SO₄(s) + 2NaNO₃(aq)

From the balanced equation above,

1 mole of Na₂SO₄ reacted with 2 moles AgNO₃

Therefore,

0.01 mole of Na₂SO₄ will react with = 0.01 × 2 = 0.02 mole of AgNO₃

From the above calculation, we can see that a higher amount of AgNO₃ (i.e 0.02 mole) than what was given (i.e 0.015 mole) is needed to react completely with 0.01 mole of Na₂SO₄.

Therefore, AgNO₃ is the limiting reactant and Na₂SO₄ is the excess reactant.

Determination of the mole of the precipitate, Ag₂SO₄ obtained

Na₂SO₄ + 2AgNO₃(aq) → Ag₂SO₄(s) + 2NaNO₃(aq)

From the balanced equation above,

2 moles of AgNO₃ reacted to produce 1 mole of Ag₂SO₄.

Therefore,

0.015 mole of AgNO₃ will react to produce = 0.015 / 2 = 0.0075 mole of Ag₂SO₄

Determination of the mass of precipitate, Ag₂SO₄ obtained

Mole of Ag₂SO₄ = 0.0075 mole

Molar mass of Ag₂SO₄ = (2×108) + 32 + (16×4) = 312 g/mol

Mass of Ag₂SO₄ =?

Mass = mole × molar mass

Mass of Ag₂SO₄ = 0.0075 × 312

Mass of Ag₂SO₄ = 2.34 g

Learn more about stoichiometry:

brainly.com/question/26092247

#SPJ4

Determine the basis's mass (1 litre of solution) Mass = d V; d = mass / V mass = 1,000 ml/litre x 1,000 g/liter x 1 litre = 1006 g

Acetic acid makes up 3.26% of vinegar. Step 1: Information is provided Sample weight: 5.54 grammes. NaOH volume: 30.10 m. NaOH has a molarity of 0.100M. Step 2: The equation with a balance. NaOH + CH3COOH = CH3COONa + H2O. Step 3: Determine the moles of NaOH/. Volume * Molarity = Moles of NaOH. NaOH moles = 0.03010 L * 0.100M. Moles of NaOH equal 0.00301 moles of NaOH. Step 4: Determine the moles of CH3COOH. For 1 mol NaOH, 1 mol CH3COOH is required. For 0.00301 moles of NaOH, 0.00301 moles of CH3COOH are required. Step 5: Determine the mass CH3COOH. Mass CH3COOH is equal to the sum of its moles and molar masses. The mass of CH3COOH is 0.00301 moles times 60.05 g/mol.m CH3COOH mass equals 0.1808 grammes. Calculate the acetic acid percentage by weight. Mass % = (0.1808 / 5.54 ) *100% Mass % = 3.26 %.

Learn more about Acetic acid here:

https://brainly.com/question/15089082

#SPJ4

A wire acts like a magnet when there is an electric current flowing through it. An electromagnet is a coil of insulated wire that carries current and is wound around a piece of iron. Additionally, magnetic material is separated from trash using electromagnets.

The current runs through the coil, which transforms into an electromagnet, when the iron strip comes into contact with the screw.

The iron strip is then pulled by it. In the procedure, a sound is created when the bell's gong is struck by the hammer at the end of the strip.

Therefore, A magnetic field is mostly reliant on current and less so on gauge, and some heating, more or less, depends on the gauge of the wire and the quantity of current.

Learn more about current flow here:

https://brainly.com/question/2264542

#SPJ4

Compound A is Alcohol, Compound B is Carboxylic Acid, Compound C is Amine.

A functional group is a specific molecular grouping of atoms that is responsible for the characteristic chemical reactions of a molecule. These groups can consist of a few atoms or several atoms joined together, and they dictate the reactivity and physical properties of the molecule. The most common functional groups in organic chemistry include alcohols, carbonyls, carboxylic acids, amines, and alkanes.

Functional groups play a critical role in determining the properties and reactivity of organic molecules. For example, alcohols have a hydroxyl (-OH) functional group that makes them polar and reactive with other polar substances. On the other hand, alkanes have a nonpolar hydrocarbon (-C-C-) functional group that makes them nonpolar and unreactive.

In chemistry, an alcohol is a type of organic compound that contains a hydroxyl (-OH) functional group. Alcohols are characterized by the presence of this functional group, which gives the molecule its characteristic polar and reactive properties.

A carboxylic acid is a type of organic acid that contains a carboxyl (-COOH) group, which is a functional group composed of a carbon atom double-bonded to an oxygen atom and single-bonded to a hydroxyl (-OH) group. Carboxylic acids are widely found in nature and have a sour taste. Examples include acetic acid (found in vinegar), citric acid (found in citrus fruits), and formic acid (found in ant bites).

Amines are a type of organic compound that contain nitrogen as a central atom and are derived from ammonia (NH3) by replacing one, two, or all three of the hydrogens with organic groups (alkyl or aryl groups). Depending on the number of hydrogen atoms replaced, amines can be classified as primary (one hydrogen replaced), secondary (two hydrogens replaced), or tertiary (all three hydrogens replaced). Amines are commonly used as intermediates in the synthesis of pharmaceuticals, agrochemicals, and dyes. They also have a range of biological activities, including serving as neurotransmitters in the human body.

To know more about compound visit:

https://brainly.com/question/14782984

#SPJ1

The time it takes for the partial pressure of cyclopropane to decrease from 1.0 atmosphere to 0.125 atmosphere at 500°C can be estimated using the half-life of the isomerization reaction.

The half-life of a first-order reaction is defined as the time it takes for the concentration of the reactant to decrease by half. In this case, the half-life of the isomerization of cyclopropane to propylene is 19 minutes at 500°C. To find the time it takes for the partial pressure to decrease from 1.0 atmosphere to 0.125 atmosphere, we can use the relationship between concentration and time in a first-order reaction. The time can be calculated as the half-life multiplied by the logarithmic ratio of the initial concentration to the final concentration. This calculation would give an estimate of the time required for the partial pressure of cyclopropane to decrease from 1.0 atmosphere to 0.125 atmosphere.

Learn more about cyclopropane:

brainly.com/question/18521496

#SPJ4

The names of elements in the periodic table do not have Latin versions as they are based on either the elements' natural occurrence, mythology, or scientists who discovered them.

However, some of the element names have roots in Latin and ancient Greek languages. Here are some examples:

These are just a few examples, and the origins of the element names vary.

Learn more about periodic table here:

https://brainly.com/question/11155928

#SPJ4

The amount of solid Ca3(PO4)2 that can be formed from 290 g of calcium nitrate and 129 g of phosphoric acid would be 183 grams.

Calcium nitrate and phosphoric acid react to form calcium phosphate and hydrogen nitrate according to the following equation:

[tex]3Ca(NO_3)_2 + 2H_3PO_4 --- > Ca_3(PO_4)_2 + 6HNO_3[/tex]

Mole of 290 g calcium nitrate = 290/164.088 = 1.77 mol

Mole of 129 g phosphoric acid = 129/97.994 = 1.32 mol

In other words, calcium nitrate is limiting.

Equivalent mole of Ca3(PO4)2 that will be formed = 1.77/3 = 0.59 mol

Mass of 0.59 mole Ca3(PO4)2 = 0.59 x 310.18 = 183 grams

In other words, the mass of solid Ca3(PO4)2 that can be formed is 183 grams.

More on stoichiometric problems can be found here: https://brainly.com/question/14465605

#SPJ1

The rate law demonstrates that as the concentration of H₂ rises, so does the rate of the reaction.

This is due to the fact that the number of effective collisions between H₂ and I₂ in order to produce HI also increases as the number of H₂ molecules increases.

b) As the vessel's volume increases, reactant molecules are able to move farther apart from one another, which results in a decrease in the number of effective collisions in a given time period. As a result, the rate of the reaction slows down.

c) The addition of a catalyst to the reaction mixture speeds up the reaction. This is due to the fact that, when a catalyst is present, the reactant molecules choose a reaction pathway with a lower activation energy. Since the pathway has a lower activation energy, the number of collisions that are effective enough to form a product increases over time. The presented plot of energy against reaction coordinate demonstrates this.

d) The number of reactant molecules with higher energy than activation energy rises with system temperature. As a result, the rate of reaction increases as well as the number of successful collisions.

For basic reactions, molecular dynamics simulations can be used to determine the rate constant. Calculating the molecule's mean residence time in the reactant state is one option.

This method can be used in small systems with short residence times, but it is not widely used because reactions are typically rare at the molecular scale.

Learn more about rate constant:

brainly.com/question/24749252

#SPJ4

The reaction of 24 g of CH₄ (methane) with 96 g of O₂ will form 66 g of CO₂ and 132 g of H₂O.

A chemical reaction is a process that causes one group of chemical components to change chemically into another.

In this reaction, one molecule of CH₄ reacts with two molecules of O₂ to form one molecule of CO₂ and two molecules of H₂O. The balanced chemical equation for this reaction is:

CH₄ + 2O₂ -> CO₂ + 2H₂O

Since 24 g of CH₄ reacts with 96 g of O₂, the number of moles of CH₄ and O₂ can be calculated.

\

The number of moles of CO₂ and H₂O can also be calculated using the balanced equation and the number of moles of CH₄ and O₂.

The number of grams of CO₂ and H₂O can then be calculated using the moles and the molar mass of each substance.

In this case, the number of grams of CO₂ formed is 66 g, and the number of moles of CO₂ is 66 g / (44.01 g/mol) = 1.5 moles.

Since two moles of H₂O are produced per mole of CO₂, the number of moles of H₂O is 2 x 1.5 = 3 moles.

The number of grams of H₂O can be calculated as 3 moles x (18.015 g/mol) = 54.045 g. So, the total amount of H₂O formed is 54.045 g.

Read more about chemical reactions here:

https://brainly.com/question/11231920

#SPJ1