Answer:
Hey there!
A MSDS is a Material Safety Data Sheet, and can be used to provide detailed and comprehensive information about the hazards of a certain product, such as medicine or chemicals.
Let me know if this helps :)
How much heat (in J) must be added to raise the temperature of 1.90 mol of air from 18.0°C to 37.0°C at constant volume? Assume air is completely diatomic.
Answer:
The amount of heat that must be added to raise the temperature of 1.90 mol of air from 18.0 ° C to 37.0 ° C at constant volume is 749. 9775 J
Explanation:
The properties cv and cp are called specific heats (or heat capacities) because, under certain special conditions, they relate the change in temperature of a system to the amount of energy added by heat transfer. Its SI units are [tex]\frac{J}{kg K}[/tex] or [tex]\frac{J}{mol K}[/tex]. Two specific heats are defined for gases, one for constant volume (cv) and the other for constant pressure (cp).
In the case of constant volume heating, the amount of heat entering the gas is equal to
Q=Cv*n*(Tfinal - Tinitial)
In this case:
Air, being considered a diatomic gas, will have a molar heat capacity of: [tex]Cv=\frac{5}{2}R[/tex] where R is the general gas constant, whose value in this case will be [tex]R= 8.31 \frac{J}{mol K}[/tex]n=1.90 molTfinal= 37 °CTinitial= 18 °CReplacing:
[tex]Q=\frac{5}{2} *8.31 \frac{J}{mol K} *1.90 mol* (37 - 18)[/tex]
Taking into account that the difference in degrees kelvin is equal to the difference in degrees Celsius, and solving you get:
[tex]Q=\frac{5}{2} *8.31 \frac{J}{mol K} *1.90 mol* 19 K[/tex]
Q= 749. 9775 J
The amount of heat that must be added to raise the temperature of 1.90 mol of air from 18.0 ° C to 37.0 ° C at constant volume is 749. 9775 J
Anyone know the answer to this? Explain if you do, im not sure if i understand what its asking.
Answer:
1. Proton = 4
2. Neutron = 5
3. Electron = 2
Explanation:
9 4Be^2+
From the above, we obtained the following:
Atomic number = 4
Mass number = 9
Charge = +2
1. Determination of the proton.
Atomic number is simply defined as the proton number. This implies that:
Atomic number = proton number
Atomic number = 4
Therefore,
4 = proton number
Proton = 4
2. Determination of the Neutron.
Mass number = Proton + Neutron
Mass number = 9
Proton = 4
Neutron =?
Mass number = Proton + Neutron
9 = 4 + Neutron
Collect like terms
Neutron = 9 – 4
Neutron = 5
3. Determination of the electron.
From the question given
9 4Be^2+
The atom has a charge of +2. This implies that the atom has lose 2 electrons. Thus we can obtain the electron as follow:
Proton = 4
Charge = +2
Electron =?
Electron = Proton – charge
Electron = 4 – 2
Electron = 2
What is the speed of a truck that travels 120km in 1.5 hours? Give your answer in km/hr.
Explanation:
Hey, there!!
Given,
distance (s)= 120km
Time (t) = 1.5 hrs.
speed = ?
We have,
[tex]speed = \frac{s}{t} [/tex]
[tex]speed = \frac{120}{1.5} [/tex]
Therefore, the answer is 80km/hr.
Hope it helps...
Answer:
82.6 km/hr
Explanation:
hoped that helped
What is science? Why do you think science is important?
Answer:
As scientist discovered that Science is the method of learning everything about the natural world.
An important role in science is to ask questions to get much more know to the topic.
Science is important to the natural world.
Science is the systematic study of the natural world through observation, experimentation, and analysis, aiming to understand its underlying principles and laws.
What is science?Science is the systematic and empirical study of the natural world and its phenomena through observation, experimentation, and the formulation of testable hypotheses. It aims to uncover the underlying principles and laws that govern the universe and provides a methodical approach to understanding, explaining, and predicting various aspects of the world around us. Science covers a wide range of disciplines, from physics and chemistry to biology, psychology, and beyond, and it plays a crucial role in advancing knowledge, technology, and society.
Science is important because it drives progress, expands knowledge, and improves lives by providing evidence-based solutions to complex problems. It fosters innovation, informs decision-making, and enhances our understanding of the universe and ourselves.
Read more about science here: https://brainly.com/question/28416408
#SPJ6
List of things that you’ll use in the scientific method
Explanation:
Make an observation
ask a question
form a hyposisese
make a prediction
test the prediction
use the results to fix the prediction and hypotheses
10. What procedure is safest to follow when using an open flame to heat the contents
of a test tube that contains a flammable mixture?
O A. Cork the test tube and then heat it gently near the bottom only.
O D. Cork the test tube and place it in a beaker of water, then heat the water in the beaker.
C. Heat the open test tube gently near the bottom only.
O B. Place the open test tube in a beaker of water, then heat the water in the beaker.
Answer:
Cork the test tube and then heat it gently near the bottom only.
Explanation:
If the contents of the test tube is flammable, then it can catch fire easily at any time. In that case, we can not heat the mixture in an open test tube, that will make the flammable substance to catch fire easily.
In heating such a flammable material, the test tube should be securely corked and heat is delivered gently to the bottom of the tube. This will prevent the substance from bursting into flames spontaneously.
5
Select the correct answer.
Who was the main author of the Declaration of Independence?
A. James Monroe
B.
Alexander Hamilton
C.
Thomas Jefferson
D. George Washington
Vjdky
Titanium occurs naturally as the mineral rutile, TiO2. One possible method of extraction of titanium is to reduce the rutile by heating with carbon. TiO2(s) + 2C(s) Ti(s) + 2CO(g) → The standard enthalpy changes of formation of TiO2(s) and CO(g) are –940 kJ mol–1 and –110kJ mol–1 respectively. What is the standard enthalpy change of this reaction?
Answer:
The standard entalpy change for the reaction is 720 kJ/mol
Explanation:
The chemical equation for the reaction is given as follows;
TiO₂ (s) + 2C → Ti (s) + 2CO
The standard enthalpy changes of formation for TiO₂ (s) = -940 kJ/mol
The standard enthalpy changes of formation for CO (g) = -110 kJ/mol
The enthalpy change of the reaction = The enthalpy of the products - The enthalpy of the reactants
Given that there are two moles of CO, we have;
The enthalpy of the products= -110 × 2 = -220 kJ/mol
∴ The enthalpy change = -220 - (-940) = 720 kJ/mol
The standard entalpy change for the reaction = 720 kJ/mol.
An aircraft flew 4,000km in 5 hours. What was its average speed? Give you answer in km/hr.
A theory is an attempt to explain what happens is an experiment. True or false?
Q1.Write down advantages and disadvantages of Mendeleev's Periodic table? Plz Help Me I Want To Make Notes For It..........
Answer:the advantage is that he discover many element unknown that time
And the disadvantage is wrong order of atomic masses and the position of isotopes
Explanation:
Answer:
Disadvantage: the isotopes and no separate position also as they have different atomic mass but same atomic number. Since the change in atomic mass of two successive elements was not constant therefore it was difficult to predict the number of missing elements with the help of atomic number only.
It could predict the existence of other elements and could predict their properties so, as to leave space in the periodic table. It could accommodate all the sixty elements discovered at that time and could accommodate the noble gases which, where discovered later.
In the quantum-mechanical hydrogen atom model, the angular momentum of the electron in the atom is determined by the integer ______.
Answer:
0 to n − 1
Explanation:
The angular or orbital quantum number, gives a description of the particular subshell or orbital where the electron is found and gives the magnitude of its orbital angular momentum.
The values of the angular momentum quantum number (ℓ) takes on integer values that ranges from 0 to n − 1
3) 2500 pounds to Kilograms
Would this be 1,250?
Answer:
1134
Explanation:
(the ones place was rounded up). 1133.981 is the unrounded answer.
I'm looking at the barometer in my lab as I type this question. It says the pressure is 968 torr. What is this pressure expressed in atm
Answer:
1.27 atm.
Explanation:
The following data were obtained from the question:
Pressure (P) in torr = 968 torr
Pressure (P) in atm =...?
Thus, we can convert from torr to atm by doing the following:
Recall:
760 torr = 1 atm
Therefore,
968 torr = 968/760 = 1.27 atm
Therefore, 968 torr is equivalent to 1.27 atm.
If you have a graduated cylinder containing 15.50 mL of water and this volume changes to 17.97 mL after a metal with a mass of 17.95 g is dropped into the graduated cylinder, then what is the density of this metal?
Answer:
Explanation:
density = mass / volume
mass = 17.95 grams
volume = 17.97 - 15.50 mL = 2.45 mL = 2.45 cc
density = 17.95 /(2.45) = 7.327 grams / cc
. Calculate percentage of nitrogen in potassium nitrate (KNO3)?
Answer:
20%of nitrogen in potassium nitrate
Are spirit filled thermometers safer than mercury filled ones?
Answer:
Yes they are safer.
Explanation:
As far as I know Spirit filled thermometers contain alcohol which is much less toxic than mercury. Mercury is a heavy metal and is therefore fairly toxic similarly to lead.
I hope this helps let me know if anything is unclear.
Your question has been heard loud and clear.
Yes , spirit filled thermometers are safer than mercury ones , actually they are made to be safer than the mercury.
In a spirit filled thermometer , it is precise and also there really is no risk of the stuff (usually alcohol or organic liquid) exploding if the thermometer glass breaks unlike the mercury thermometer , where if the glass breaks , there is a high risk of the mercury ball intoxicating the air and endangering lives.
Thank you
What is the total number of sp2-hybridized carbon atoms present in the fluorophore used in the experiments
Answer:
9
Explanation:
The structure of fluorophore used in the experiments has been drawn in the attachment. And from the drawing counting we can say that there are 9 sp2-hybridized carbon atoms present. Fiuorophores are a fluorescent chemical compound that can re-emit light upon light excitation. Normally used to produce absorbance and emission spectra.
If you have a volume of 10 mL and a mass of 100kg what is the density (please explain)
Answer:
0.1 grams per millilitre
Explanation:
Explanation:
Density = Mass/Volume = 10 g/100 mL = 0.1 grams per millilitre.
0.1 grams per millilitre, The density is 10 kg/mL
What is density ?The density of a material can be defined as its mass per unit volume means it is the ratio between mass and volume, where the how much stuff an object has in a unit volume.
Density is a measurement of matter, where it shows how tightly matter is crammed together, it was discovered by the Greek scientist Archimedes
To calculate the density of an object, the mass (m) can be divided by the volume (v)
Density = Mass/Volume
The SI unit of density is kilogram per cubic meter (kg/m3) or in cgs unit of grams per cubic centimeter (g/cm3).
For example, Wood floats in water as it has lower density while anchor sinks because it has a higher density, similarly Helium balloons float because the density of the helium is lower than the density of air.
Learn more about density, here:
https://brainly.com/question/15164682
#SPJ2
Ca:
alkali metal
alkaline earth metal
The answer is alkaline earth metal!
Answer:
alkaline earth metal
it's because calcium in the periodic table is located in group 2
how many nickel atoms are in a nickel coin with a mass of 3.95g
Answer:
4.05 × 10²² atoms
Explanation:
Step 1: Given data
Mass of nickel: 3.95 g
Step 2: Calculate the moles corresponding to 3.95 g of nickel
The molar mass of nickel is 58.69 g/mol.
3.95 g × (1 mol/58.69 g) = 0.0673 mol
Step 3: Calculate the atoms in 0.0673 moles of nickel
We will use Avogadro's number: there are 6.02 × 10²³ atoms of nickel in 1 mole of atoms of nickel.
0.0673 mol × (6.02 × 10²³ atoms/1 mol) = 4.05 × 10²² atoms
When testing a diode with the multimeter set on "Diode Check," a reading of 0.6 volt is obtained. This indicates that the diode being tested is a
Answer:
Rectifier
Explanation:
when The reading on a multi meter set used to test a diode shows a reading of approximately 0.6 Volt, it simply means that the diode being tested is a either a silicon diode or a rectifier.
setting the multi meter set to " Diode check" is done when one wants to check for the voltage ( forward or reverse bias ) across the diode. the current passed through the diode is between : 1-10mA. and a reading of 0.6 to 0.7 volts indicates that the diode is a rectifier or a silicon diode
What part of the scientific method involves controlling variables while testing a hypothesis
Answer:
Making observation
Explanation:
What is most likely to react strongly with an acid? A. Noble gases B. All of these C. Lemon juice D. Metal hydroxides
Answer:
I think is B) All of these
Explanation:
Hey, there!!
The answer us option D.
Because acids easily reacts with metalic hydroxides to form salt and water.
[tex]hcl(aq) + naoh(aq) \: = h2o \: + \: nacl[/tex]
For option A, B and C.
nobel gaeses donot react as they already have stable electronic configuration. All of this is not correct.Lemon juice is itself a citric acid.SO, THE ANSWER IS OPTION D.
Hope it helps
2 C2F4 → C4F8 is 0.0410 M−1 s −1 . We start with 0.105 mol C2F4 in a 4.00-liter container, with no C4F8 initially present. What will be the concentration of C2F4 after 3.00 hours ? Answer in units of M.
Answer:
After three hours, concentration of C₂F₄ is 0.00208M
Explanation:
As the units of the rate constant of the reaction are M⁻¹s⁻¹ we can know this reaction is of second order. Its integrated law is:
[tex]\frac{1}{[A]} =\frac{1}{[A]_0} +Kt[/tex]
Where [A] and [A]₀ represents initial and final concentrations of the reactant (C₂F₄), K is rate constant (0.0410M⁻¹s⁻¹) and t is time.
3.00 hours are in seconds:
3 hours ₓ (3600 seconds / 1 hour) = 10800 seconds
Computing in the equation:
[tex]\frac{1}{[A]} =\frac{1}{[0.105mol / 4L]} +0.0410M^{-1}s^{-1}*10800s\\\frac{1}{[A]} = 480.9M^{-1}\\\[/tex]
[A] = 0.00208M
After three hours, concentration of C₂F₄ is 0.00208MWhich of these statements is NOT TRUE? Scientists propose explanations that can be explained by examining evidence. Scientists propose explanations that can be explained by examining evidence. Science is an organized way to investigate, understand, and explain events in the natural world. Science is an organized way to investigate, understand, and explain events in the natural world. Scientists collect and organize information randomly, looking for patterns and connections between events. Scientists collect and organize information randomly, looking for patterns and connections between events. Science deals only with the natural world.
Answer:
The correct option is;
Scientist propose explanations that can be explained by examining evidence
Explanation:
A scientists makes an hypotheses based on possible natural processes to explain the origin and/or the nature of the characteristics of a natural observation. The scientist then source more data and information to put their hypotheses to test. Due to the fact that an hypotheses is based on observable processes and/or mechanisms, the given hypotheses can be further tested by other scientists through the use of their individually sourced data. From the result of the assessment, the hypotheses can be either accepted or rejected to enable the better clarification of the hypotheses when accepted or the development of a new hypotheses when rejected.
Which one of the following would you expect to dissolve in water? limonene sucrose oil atmospheric oxygen none of the above
-----------sucrose----------------
Water is a polar molecule that has the ability to dissolve the polar molecules. Sucrose being a polar molecule will be able to get dissolved. Thus, option b is correct.
What are polar molecules?
Polarity is a characteristic shown by the polar molecules that shows covalent bonds and have electronegativity differences between the positive and the negative charges.
It has been said that a substance has a tendency to attract a similar substance and hence polar molecule of water attracts the sucrose molecule and easily dissolves it.
On the other side, limonene, oil, and atmospheric oxygen are non-polar molecules and hence are incapable of getting dissolved in another polar molecule.
Therefore, option b. sucrose gets dissolved in water.
Learn more about polarity, here:
https://brainly.com/question/17346181
#SPJ2
Can anyone help me with these I’m really co fused on what to do it’s for chemistry?
Answer:
It's just asking you to rearrange to equations to get what you want, so no numbers involved it's just teaching you the basics.
Explanation:
If you have a density of 100 kg/L and a mass of 1000 g what is the volume (please explain)
Answer: Volume = 0.01L
Explanation:
The density of a substance is given by; Density = Mass / Volume.
In this question, Mass = 1000g, Volume = ? and Density = 100 Kg/L
For the units to be uniform, we convert 1000g to Kg = 1Kg
Therefore, Volume = Mass / Density = 1Kg / 100Kg/L = 0.01L
what is the metric system of units?
Answer:
The metric system is a system of measurement that uses the meter, liter, and gram as base units of length (distance), capacity (volume), and weight (mass) respectively.
Answer:
The metric system of units are:
a) meter
b) litre
c) gram.
Explanation:
These are all system of measurements.
okay.