What is the molecularity of each of the following elementary reactions? Write the rate law for each.
(a) Cl2(g) → 2 Cl(g)
(b) OCl–(aq) + H2O(l) → HOCl(aq) + OH–(aq)
(c) NO(g) + Cl2(g) → NOCl2(g)

The mass of the compound that would be expected to form if 85.2 g of iodine were used in the experiment is 56.0 g. This can be calculated using the mass ratio of iodine to fluorine and the original data.

To find the expected mass of the compound, we first need to calculate the mass of fluorine that was used in the original experiment:

From this, we can find the mass of fluorine by dividing the mass of the compound by the mass ratio of iodine to fluorine:

We can then use this data to find the expected mass of the compound that would form if 85.2 g of iodine were used instead:

This is the expected mass of the compound that would be produced in the experiment if 85.2 g of iodine were used.

Learn more about Iodine:

https://brainly.com/question/2064871

#SPJ4

The atoms that comprise a molecule are held together by chemical bonds. Chemical bonds can also hold molecules to one another. Water molecules are joined to one another by hydrogen bonds.

What exactly is a chemical bond?

The atoms or ions that come together to create a molecule or the molecules that combine to make a substance are held together by a force of attraction. It is in charge of keeping the individual atoms or molecules together. The energy is released when chemical bonds are formed. Chemical bonds bind substances together. Chemical bonds that hold molecules together also form temporary connections vital for life.

Ionic, covalent, hydrogen, and London dispersion forces are examples of chemical bonding.

To know more about Chemical bonds visit:-

https://brainly.com/question/819068

#SPJ1

The helium Lewis dot structure  is as follows :

   He :

The helium is denoted by the symbol He.  The Helium, belongs to the the  noble gases in the Group 8, it has the only two valence electrons in its valence shell and the first orbit will have the only those two electrons. The electrons are will be represented as the two lone pair with the dots in the Lewis symbol. The lewis structure of the helium is as follows :

   He :

In the lewis or the electron dot structures, the number of the valence electrons for the element is represented by the dots. In the periodic table, the valence electrons will have the highest level of the energy.

To learn more about lewis structure here

https://brainly.com/question/20300458

#SPJ4

Measuring absorbance at two wavelengths is necessary to differentiate between compounds with similar absorption spectra, and determine their concentrations in a solution. This is important in analytical chemistry, particularly spectrophotometry and colorimetry.

What is absorbance?

Absorbance is a measure of how much light is absorbed by a substance as it passes through a solution. It is calculated as the logarithm of the ratio of the intensity of incident light to the intensity of transmitted light, according to the Beer-Lambert law. The more a substance absorbs light, the higher its absorbance will be. Absorbance is commonly used in analytical chemistry to determine the concentration of a particular analyte within a solution, based on its absorbance characteristics at specific wavelengths.

Hence, the answer is, measuring absorbance at two wavelengths is necessary to differentiate between compounds with similar absorption spectra, and determine their concentrations in a solution.

To learn more about absorbance, follow the link:

https://brainly.com/question/23938376

#SPJ4

The balanced chemical reaction is 2NH3(g) + 5/2 O2 (g) → 2NO (g) + 3H2O (l). A reaction can be balanced by making the atoms equal on both sides of the reaction.

A chemical reaction is said to be a balanced chemical reaction if it have the same number and type of each atom on both sides of the equation. The coefficients in a balanced reaction must be the simplest whole number ratio. Mass is always conserved in a chemical reactions. The chemical reaction is a process in which one or more substances are changed into one or more new substances. In the balanced reaction the atoms in the reactant and the product are equal. Reactants are the starting materials in a reaction. Products are the materials present at the end of a reaction.

To learn more about Balanced chemical reaction please visit:

https://brainly.com/question/23877810

#SPJ4

The Na2CO3 . 2H2O is the formula for the hydrate you started with the compounds.

What is mole ?

A mole is the atom's elementary particle, an ion. The mole of the substance is always related to the Avogadro number. The mole is always associated with the weight or mass of the element or substance. The standard unit of a mole is mol. The mole is a significant factor of the reactant and products to form an equation. A mole calculates the atom, ion, and substance weighs.

What is compound ?

A compound combines one or more additional substances to form a new product. The combination of two substances or elements is equal to the mass ratio for making that product. It is attached firmly, and they have equal in all ways to form a combination. The elements both are bonded together. Each compound has its chemical structure; if it breaks, it can either split into two atoms or molecules or in a single. Different types of compounds are present.

Moles of compound (anhydrate Na2CO3)

= mass / molar mass

= 3.22 g / 105.98 g mol-1 = 0.0304 mol

Mass of water = Mass of hydrated Na2CO3 - mass of anhydrate Na2CO3

= 4.31 g - 3.22 g = 1.09 g

Thus,

Moles of water = mass / molar mass

= 1.09 g / 18.015 g mol-1 = 0.0605 mol

Therefore,

Molecular ratio (n)  is calculated by  moles of components  divided by minimum number of moles.

Hence,

n (Na2CO3) = 0.0304 / 0.0304 = 1

n (H2O) = 0.0605 / 0.0304 = 1.99 = 2

Thus, 2 moles of water is present in 1 mol of Na2CO3.

Hence,  formula for hydrate = Na2CO3 . 2H2O

Therefore, Na2CO3 . 2H2O is the formula for the hydrate you started with the compounds.

Learn more about moles from the given link.

https://brainly.com/question/29367909

#SPJ1

The study of variation and inheritance is called genetics.  "Inheritance being defined as a technique through which the qualities and attributes are passed

The term 'Inheritance' comes a contraction of the word "Inherit" that means, "to inherit any trait, attributes or traits from family". Therefore, "Inheritance being defined as a technique through which the qualities and attributes of the super class or even other derived classes are passed down to the sub or child class.

It also has the ability to take characteristics first from child class and use them in other derived classes." The study of variation and inheritance is called genetics.

Therefore, the study of variation and inheritance is called genetics.

To learn more about inheritance, here:

https://brainly.com/question/13164946

#SPJ9

If the vapor pressure of water at 25°C is 23.56 torr, then the vapor pressure of the solution is 21.77 torr.

According to thye question,

Mass of NaCl = 20.0 g

Molar mass of NaCl = 58.5 g/mol

Moles of NaCl = Given mass/ Molar mass [tex]=\frac{20}{58.5} =0.34188[/tex]

NaCl in aqueous solution completely dissociates as:

Moles of Na+ = 0.34188

Moles of Cl- =  0.34188

Given, mass of water = 150.0 g

Water has a molar mass of 18 g per mol.

Moles of water [tex]=\frac{150}{18}=8.33333[/tex]

Therefore, total moles in solution

=  Moles of water +  Moles of Na+ + Moles of Cl-

=  8.33333 +  0.34188  +   0.34188

= 9.017

Mole fraction of water in solution

= Moles of water/ Total moles

[tex]\frac{8.33333}{9.017} =0.9242[/tex]

Again, From Raoult's law,

We know,

Water's solution's vapor pressure as a volatile component

=  (Mole fraction of water) x (Vapor pressure of pure water)

= 0.9242 x 23.56  torr

= 21.77 torr

Learn more about Raoult's law

brainly.com/question/28304759

#SPJ4

The minimum temperature that air must be chilled to in order to reach saturation at or below 0°C (32°F).

The dew point is the temperature that must be reached while maintaining pressure for the air to become saturated, or for the relative humidity to reach 100%.

Simply said, the boiling point is also known as the saturation temperature. The term "saturation" refers to the temperature that a liquid must reach in order to boil and transition into the vapour phase based on its saturation pressure.

Intensity and chroma are other names for saturation. It speaks to the color's predominant hue. The "pure" hues are found at the outermost portion of the hue wheel. The hue we are using to describe the colour predominates less and less as you travel towards the centre of the wheel.

To learn more about saturation refer to:

https://brainly.com/question/601501

#SPJ4

False. The flow of protons back into the mitochondrial matrix through ATP synthase is exergonic and provides the energy for ATP synthesis.

False. An electron donor provides the electrons required for the electron transport chain (ETC), which ultimately generates a proton gradient that drives the synthesis of ATP. The potential energy required to produce ATP comes from the proton gradient itself, not from the electron donor.

During cellular respiration, the ETC uses electrons from electron donors such as NADH and FADH2 to pump protons (H+) across the inner mitochondrial membrane. This generates a gradient of protons with a higher concentration of protons outside the mitochondrial matrix than inside. The energy stored in this gradient is used by ATP synthase to synthesize ATP from ADP and inorganic phosphate. The flow of protons back into the mitochondrial matrix through ATP synthase is exergonic and provides the energy for ATP synthesis. Therefore, it is the proton gradient, not the electron donor, that provides the potential energy required to produce ATP.

Learn more about ATP synthesis here https://brainly.com/question/30051393

#SPJ4

A shielded nucleus will absorb uplift from a deshielded nucleus and will have a lower chemical shift.

Generally, in nuclear magnetic resonance (NMR) spectroscopy, the chemical shift is defined as a measure of the resonance frequency of a nucleus relative to a reference compound. The chemical shift usually depends upon the electronic environment of the nucleus, which is affected by nearby atoms or groups of atoms.

Basically, when a nucleus is shielded, it means that there are electrons or electron-donating groups nearby which reduces the external magnetic field experienced by the nucleus. And this results in a lower resonance frequency or higher chemical shift due to the reason that nucleus requires less energy to achieve resonance.

Learn more about NMR spectroscopy from the link given below.

https://brainly.com/question/17355874

#SPJ4

The amount of moles of NaOH would be 0.0025 mol.

To estimate how much of a solution exists needed to create a diluted solution with a desired volume the equation [tex]$M_1 V_1=M_2 V_2$[/tex] can be utilized, where M exists molarity, V exists  volume, and 1 and 2 denote the initial and diluted solution.

[tex]$$\begin{aligned}& V_1=\frac{M_2 V_2}{M_1} \\& V_1=\frac{(0.1)(1)}{1}=0.1 \mathrm{~L}\end{aligned}$$[/tex]

Therefore, the solution will require 0.1 L or 100 mL.

The amount of moles of NaOH is [tex]$n=0.1 \times 0.025=0.0025 \mathrm{~mol}$[/tex].

Since the reaction between KHP and NaOH exists 1 : 0.0025 mol of KHP will be required. This corresponds to a mass of [tex]$m=204.2 \times 0.0025=0.51 \mathrm{~g}$[/tex]

The equation [tex]$M_1 V_1=M_2 V_2$[/tex] can be utilized.

[tex]$$\begin{aligned}& V_1=\frac{M_2 V_2}{M_1} \\& V_1=\frac{(0.2)(1)}{1}=0.2 L \text { or } 200 \mathrm{~mL}\end{aligned}$$[/tex].

Therefore, the correct answer be 0.2 L or 200 mL.

To learn more about moles refer to:

https://brainly.com/question/24191825

#SPJ4

[tex]SF_{6}[/tex] is non polar due to symmetrical placement of all the fluorine around the central sulfur atom.

SF6 is a covalent molecule with a central sulfur atom. Sulfur on its own contains 6 valence electrons as a main group 6A element. This will share all 6 valence electrons through 6 single covalent bonds to the 6 peripheral fluorine atoms. So the central sulfur atom has zero non-bonding pairs. These bonds are sometime polar due to the central and peripheral atoms having different electronegativity values. The polar molecule contains a certain geometry that does not cancel out these polar bond vectors. Due to its geometry sulfur hexafluoride is non polar. The arrangement of this is at perpendicular (90˚) angles ensures that the pull for electrons by fluorines on one side is balanced by fluorines pulling on the other side.

To learn more about Non polar molecule please visit:

https://brainly.com/question/1426521

#SPJ4

To compare the emissions of a propane-burning car to that of a gasoline-burning car, we need to calculate the amount of CO2 produced from a single tank of gas for each fuel. Here's how it can be done:

Propane:

A single tank of propane contains 40.0 kg of fuel. From the balanced equation for propane combustion, we know that for every 1 mole of propane burned, 3 moles of CO2 are produced.

We can use the molar mass of propane (44.1 g/mol) to convert the amount of fuel to moles:

40.0 kg × 1000 g/kg ÷ 44.1 g/mol = 909.1 moles

So, 909.1 moles of propane would be burned, producing:

909.1 moles × 3 moles CO2/1 mole propane = 2727.3 moles CO2

Finally, we can use the molar mass of CO2 (44.0 g/mol) to convert the amount of CO2 to grams:

2727.3 moles × 44.0 g/mol = 120167.2 g

And then, to convert the amount of CO2 to kilograms:

120167.2 g ÷ 1000 g/kg = 120.2 kg CO2

So, from a single tank of propane, 120.2 kg of CO2 would be produced.

Gasoline (2,2,4-trimethylpentane):

A single tank of gasoline contains 40.0 kg of fuel. From the balanced equation for gasoline combustion, we know that for every 1 mole of gasoline burned, 8 moles of CO2 are produced.

We can use the molar mass of gasoline (114.2 g/mol) to convert the amount of fuel to moles:

40.0 kg × 1000 g/kg ÷ 114.2 g/mol = 349.6 moles

So, 349.6 moles of gasoline would be burned, producing:

349.6 moles × 8 moles CO2/1 mole gasoline = 2796.8 moles CO2

Finally, we can use the molar mass of CO2 (44.0 g/mol) to convert the amount of CO2 to grams:

2796.8 moles × 44.0 g/mol = 122957.1 g

And then, to convert the amount of CO2 to kilograms:

122957.1 g ÷ 1000 g/kg = 122.9 kg CO2

So, from a single tank of gasoline, 122.9 kg of CO2 would be produced.

From the calculations above, we can see that a car burning gasoline produces slightly more CO2 than a car burning propane from a single tank of fuel.

The process of transformation of any liquid substance into a solid is comprehended as freezing. The temperature below which any material advents transforming its phase to solid from the liquid is understood as that material's freezing point.

Freezing is that process that begins taking place when the temperature is lowered down enough. Due to the decreased temperature, the transition occurs at the molecular level as the molecule's rate turns on decreasing. Due to the substantial slow down the molecules become incapable to confound the attractive forces among them. As an effect, the configuration of molecules along the specified positions takes place and directs to the phenomenon of freezing.

To learn more about the phases of transition visit here:

https://brainly.com/question/29795678

#SPJ4

Answer: 12

Explanation: the hcf of 24 and 36 is 12 because the common multiples they both have are 2*2*3 which is equal to 12

A single square from the periodic table is shown. It describes the element niobium. This information can be used to determine that all niobium atoms have 41 -Protons

The periodic table, also known as the periodic table of the elements, is described as a rows and columns arrangement of the chemical elements.

The square from the periodic table that describes niobium includes its atomic number, which is 41.The other information provided in the square, like  as the atomic mass, electron configuration, and chemical symbol, can also be determined from the element's position in the periodic table.

Learn more about periodic table at: https://brainly.com/question/1173237

#SPJ1

Alkali metals has the lowest ionization energy values.Ioinization energy may be negative or positive.

In physical science and science, ionization energy (IE) (American English spelling), ionization energy (English spelling) is the base energy expected to eliminate the most approximately bound electron of a secluded vaporous iota, positive particle, or molecule.[1] The main ionization energy is quantitatively communicated as

X(g) + energy ⟶ X(g)⁺ + e−

Group 1 of the Periodic Table highlights metals whose valence electron Independently involves the peripheral shell, the valence shell of the given iotas. Since the nuclear charge is essentially reduced of regard to the valence shell, the alkali metals show the least ionization energies, and these energies (sensibly) decline down the Gathering.

To know more about ionization energy,visit here:

https://brainly.com/question/28385102

#SPJ4

Potassium-39 has 19 electrons, 19 protons, and 20 neutrons.

Potassium (K) has 19 protons since its atomic number is 19, which means it also has 19 electrons in its neutral state because the number of protons equals the number of electrons in a neutral atom.

The number of neutrons in potassium can be calculated by subtracting the atomic number (number of protons) from the mass number (number of protons + neutrons). The most abundant isotope of potassium is 39K, which has a mass number of 39. Therefore, the number of neutrons in potassium-39 is:

Number of neutrons = Mass number - Atomic number

Number of neutrons = 39 - 19

Number of neutrons = 20

It's worth noting that potassium has other isotopes with different numbers of neutrons, but the most abundant isotope is 39K.

To know more about electrons here

https://brainly.com/question/1255220

#SPJ4

Answer: False

Explanation: Flase Old John Dalton (1776-1894)

I hope this is helpful I know it is not much but this is a false answer  

A. The Wrap Text command is used to display the contents of a cell on multiple lines.

The Wrap Text command is a feature in Microsoft Excel that allows the contents of a cell to be displayed on multiple lines within the cell.

While entering text into an Excel cell, by default, the text will overflow into adjacent cells if it's longer than the width of the cell. However, the Wrap Text command allows to display the full text within the cell by automatically adjusting the row height to accommodate multiple lines of text.

To apply the Wrap Text command in Excel, select the cell or range of cells that has to be formatted, right-click on them, and choose Format Cells. In the Format Cells dialog box, go to the Alignment tab and select the Wrap Text checkbox. You can also access this option through the Home tab on the ribbon by clicking on the Wrap Text button.

Once applied the Wrap Text command to a cell, any text that exceeds the width of the cell will automatically wrap to the next line within the same cell. Adjust the row height manually by dragging the bottom border of the row to make all the wrapped text visible. If want to remove the text wrapping, simply uncheck the Wrap Text option.

To know more about The Wrap Text command, visit:

https://brainly.com/question/29891251

#SPJ1

You would need to take 1864 mL of concentrated hydrochloric acid to prepare 2.80 L of 0.540 M HCl.

To calculate the amount of concentrated hydrochloric acid required, we need to find the number of moles of hydrochloric acid in the final solution and then work backwards to find the amount of concentrated solution required.

The number of moles of hydrochloric acid in the final solution can be calculated as follows:

We know that the concentrated hydrochloric acid is 37.0% HCl by mass and has a density of 1.20 g/mL, so we can calculate the number of moles of HCl in one milliliter of the concentrated solution as follows:

Therefore, to obtain 1.50 moles of HCl, we would need 1.50 moles / 0.0124 moles/mL = 121 mL of the concentrated solution. However, we want to prepare 2.80 L of the final solution, so we would need

Learn more about Hydrochloric Acid:

https://brainly.com/question/3229358

#SPJ4

Complete Question:

Hydrochloric acid is usually purchased in a concentrated form that is 37.0% HCl by mass and has a density of 1.20 g/mL. How much concentrated solution would you take to prepare 2.80 L of 0.540 M HCl by mixing with water?

To determine if a gamma ray of a given wavelength has enough energy to remove an electron from a hydrogen atom, we need to calculate the energy of the gamma ray and compare it to the ionization energy of a hydrogen atom.

First, let's calculate the energy of the gamma ray. The energy of a photon can be calculated using the equation:

E = hc/λ

where:

h = Planck's constant (6.626 x 10^-34 J s)

c = speed of light (2.998 x 10^8 m/s)

λ = wavelength of the gamma ray (1.00 x 10^-8 cm)

Now we can plug in the values:

E = (6.626 x 10^-34 J s) * (2.998 x 10^8 m/s) / (1.00 x 10^-8 m)

E = 1.98 x 10^-18 J

Next, let's calculate the ionization energy of a hydrogen atom. The ionization energy of hydrogen is the minimum amount of energy required to remove an electron from the hydrogen atom. It is given as 13.6 eV, which can be converted to joules:

13.6 eV * 1.60 x 10^-19 J/eV = 2.18 x 10^-18 J

Finally, we compare the energy of the gamma ray (1.98 x 10^-18 J) to the ionization energy of hydrogen (2.18 x 10^-18 J). Since the energy of the gamma ray is less than the ionization energy of hydrogen, we can conclude that it does not have enough energy to remove an electron from a hydrogen atom.

Learn more about gamma ray:

https://brainly.com/question/1549078

#SPJ4

Elements of the same group have similar valance shell electronic configurations. Hence they exhibit similar Chemical Properties.

Elements of the same group in the periodic table have the same number of valence electrons, which are located in the outermost electron shell. As a result, these elements have similar valence shell electron configurations, which determine their chemical properties and reactivity. This is why elements of the same group exhibit similar chemical behavior, including reactivity towards other elements and the tendency to form similar types of chemical bonds.

Learn more about shell electronics:

https://brainly.com/question/28727396

#SPJ4

The amount of the dangerous chemical that is present in the product should not be listed on the MSDS.

For hazardous substances used at work, MSDSs must be created, and they must include a list of all hazardous substances that are present in a product in concentrations of 1% or higher, or 0.1% or higher if the substance is carcinogenic. The amount of the dangerous chemical that is present in the product should not be listed on the MSDS.

A Material Safety Data Sheet (MSDS) is a document that details how to work safely with a chemical product as well as any potential hazards (health, fire, reactivity, and environmental). It serves as a crucial foundation for the creation of a comprehensive health and safety program.

Under its Hazard Communication Standard, OSHA has modified the standards for identifying dangerous chemicals (HCS). Pictograms, a signal word, warning and cautionary language, the product identifier, and supplier information must all be present on labels.

The complete question is:

Pre lab: Where we can find the unique identification code for each chemical

To learn more about unique identification code refer to;

https://brainly.com/question/13479789

#SPJ4

Interphase is the longest stage of the cell cycle.The mitotic phase, also known as the M phase, is the shortest stage of the cell cycle.

The longest phase of the cell cycle is interphase, which is further subdivided into G1 (Gap 1), S (Synthesis), and G2 (Gap 2). The cell develops, copies its DNA, and gets ready to divide during interphase. Cellular activity and growth occur during the G1 phase, DNA replication takes place during the S phase, and cell expansion and preparation for cell division occur during the G2 phase.

The shortest phase of the cell cycle is the mitotic phase, sometimes referred to as the M phase. The cell splits its cytoplasm and nucleus to create two daughter cells during this phase. The two main steps of the M phase are mitosis (nuclear division) and cytokinesis (cytoplasmic division). Mitosis entails the division of cells.

For such more questions on Interphase :

brainly.com/question/30622117

#SPJ4

The two main factors that determine the outcome of a chemical reaction in a living cell are direction and rate.

Chemical reactions are absolutely necessary for the production of energy, also known as ATP, in our cells. Energy is essential to the survival of all living things, and ATP is the reactant that fuels the majority of the chemical reactions that take place inside of cells. The production of usable energy by cells is referred to as cellular respiration.

Biochemical reactions are another name for chemical reactions that take place inside of living things. The term "metabolism" refers to the whole of all the biochemical events that take place within an organism. Both exothermic (result in the release of heat) and endothermic (result in the absorption of heat) chemical reactions are involved in the metabolic process.

To learn more about chemical reaction, click here:

https://brainly.com/question/11470635

#SPJ4

The average mass of element X is 51.2 amu, which is closer to 54 amu than to 50 amu.

Isotopes are variants of an element that have the same number of protons in their atomic nuclei but different numbers of neutrons.

To determine whether the average mass of the element X is going to be closer to 50 amu or 54 amu, we can calculate the weighted average of the masses of the two isotopes, taking into account their natural abundances.

The formula for calculating weighted average is:

avg mass = (abundance of isotope 1 * mass of isotope 1) + (abundance of isotope 2 * mass of isotope 2)

In this case, we have:

abundance of isotope 1 = 70%

mass of isotope 1 = 50 amu

abundance of isotope 2 = 30%

mass of isotope 2 = 54 amu

Upon substituting the values into the formula, we get:

average mass = (0.7 * 50 amu) + (0.3 * 54 amu)

average mass = 35 amu + 16.2 amu

average mass = 51.2 amu

So the average mass of element X is 51.2 amu, which is closer to 54 amu than to 50 amu. This is because the second isotope has a higher mass and a higher natural abundance than the first isotope, so it contributes more to the overall mass of the element X.

To know more about Isotopes, visit:

https://brainly.com/question/11680817

#SPJ1

The experimental criterion is to be used to measure the rates of bromination of the hydrocarbons in this experiment is "color change". Option 3 is correct.

Bromination of hydrocarbons involves adding bromine to the hydrocarbon, which results in a color change. Bromine is a reddish-brown liquid, and when it reacts with a hydrocarbon, the color of the mixture fades as the bromine is consumed. The rate of bromination can be determined by measuring the color change over time.

In this experiment, the hydrocarbons can be mixed with a solution of bromine in an organic solvent such as chloroform, and the reaction can be monitored by measuring the color change using a spectrophotometer or by visual observation. The rate of reaction can be determined by measuring the time taken for the color to fade, or by measuring the decrease in absorbance of the bromine solution over time.

To know more about bromination here

https://brainly.com/question/28938775

#SPJ4