what is the molality of ethanol in a solution made by dissolving 14.6 g of ethanol, c2h5oh, in 53.6 g of water?

If you have 1.0 moles of each compound, the compound with the greater mass is KF

Mass = moles x mass molar

Mass molar NBr₃ = 253.7187 g/mol

Mass molar  H₃PO₄ = 97.995182 g/mol

Mass molar Fel₃ =436.55841 g/mol

Mass molar KF =58.0967032 g/mol

Therefore, the compound with the higher mass, if you have 1.0 moles of each, is KF.

Learn more about mass at https://brainly.com/question/15303663

#SPJ4

Science is a tapestry and when you yank at one thread the whole thing may need to be rewoven but sometimes you have to yank the thread.

Science is a tapestry, and yanking at one thread may require the entire thing to be rewoven, but sometimes you have to yank the thread. I believe the analogy implies that scientists may misinterpret things while also discovering new ways to view the universe.
Vesto Slipher contributed by taking spectra of spiral nebulae and discovering galactic redshifts. Slipher discovered that the majority of the objects were fleeing at high speeds. Hubble was able to correlate Slipher's measurements with distance as a result of this discovery. He used other methods to develop this law, which stated that the farther away the galaxy was, the faster it was moving away from us.

Go through the given link below to know more about Tapestry:-

https://brainly.com/question/5868851

#SPJ4

The prefix used to represent four in this nomenclature is quad

(Quad means four, lateral means side). A Quadrilateral has four-sides, it is 2-dimensional (a flat shape), closed (the lines join up), and has straight sides.

With this in mind, the prefix quad- is used to indicate the number 4 and can be added to create a new word such as it is added to the word "lateral" which means sides and then it becomes a shape with four sides "Quadrilateral"

Read more about nomenclatures here:

https://brainly.com/question/29961518

#SPJ1

The term "activation energy" refers to the energy difference between the reactant and the transition state.

The least amount of energy required to initiate a reaction is called activation energy. The activation energy controls the pace at which the reaction happens, whereas the Gibbs free energy specifies where the equilibrium will settle down and how many products are created at the end of the process.

The activation energy must be provided in order for the molecule to reach the transition state because it is a high-energy state. Reactant molecules don't stay in the transition state for very long since it is unstable; instead, they move on to the next phase of the chemical reaction right away.

During phase transition, both free energy and entropy change. The rate of entropy increases as the temperature rises because it causes the molecules to move more randomly.

To learn about free energy.

https://brainly.com/question/15319033

#SPJ4

The CS2 Lewis structure has sixteen valence electrons. The center of this arrangement should contain carbon, the least electronegative atom. Because some atoms do not have complete octets, molecules like BeCl2 and BCl3 are referred to as electron deficient.

The perimeter of something like the center is surrounded by positively charged electrons. Scientists may discover it difficult to observe them because of how swiftly they revolve.

The negatively charged components of an atom are known as electrons. All of an atom's electrons combine to form a negative charge that counteracts the positive charge of the protons in the atomic nucleus.

To know more about Electrons visit:

https://brainly.com/question/1255220

#SPJ4

Take the carbon dioxide (CO2) molecule as an illustration. The linear CO2 molecule has polar carbon-oxygen double bonds (electronegativities: C = 2.5, O = 3.5).

Is CO2 electronegativity polar?

The polar bonds in CO2 and H2O are both two. The CO2 molecule is non-polar because the dipoles in the linear form of the molecule cancel each other out.

Is the bond in CO2 polar or nonpolar?

While sulphur dioxide is a bent molecule, carbon dioxide is a linear molecule. In spite of the fact that both molecules have polar bonds (see bond dipoles on the Lewis structures below), carbon dioxide is nonpolar whereas sulphur dioxide is polar.

To know more about oxygen visit:

https://brainly.com/question/14962130

#SPJ4

Liquids and solids are referred to as “condensed phases” because the attractive forces leave little space between the molecules. Thus, option 2 is correct.

The solids and liquids are collectively referred to as the condensed phase of matter because they have much smaller spaces between their particles than do those in gases.

Condensed states of matter refer to both solids and liquids as a whole. Since atoms in solids and liquids are more closely packed together and have greater intermolecular forces than those in gases, these two states of matter are collectively referred to as condensed states of matter.

Thus, Liquids and solids are referred to as “condensed phases” because the attractive forces leave little space between the molecules.

Learn more about condensed phases

https://brainly.com/question/4364369

#SPJ1

Complete question:

Liquids and solids are referred to as “condensed phases” because the attractive forces

The building blocks of nucleic acids are monomers called "Nucleotides." Nucleic acids are RNA and DNA.

Nucleotides are the basic building blocks of nucleic acids (RNA and DNA). A nucleotide is made up of a sugar molecule, which is ribose in RNA or deoxyribose in DNA, linked to a phosphate group and a nitrogen-containing base. Adenine (A), cytosine (C), guanine (G), and thymine are the bases used in DNA (T). In RNA, the base uracil (U) replaces thymine. DNA and RNA are polymers composed of long chains of nucleotides.

Nucleotides play an important role in organism physiology as nucleic acid building blocks, chemical energy storage, carriers of activated metabolites for biosynthesis, structural moieties of coenzymes, and metabolic regulators.

Here to learn more about Nucleotide:

https://brainly.com/question/1569358

#SPJ4

The given equation Na₂O + HF-> NaF + H₂O does not satisfy the law of conservation of matter, since there are 2 sodium atoms as reactants, but only 1 sodium atom as a product.

There are certain laws that govern the chemical reactions. These laws are known as the laws of chemical combination. The law of conservation of matter states that matter is neither created nor destroyed in a chemical reaction.

The law of conservation of matter is also called the law of conservation of mass. The total mass of the products is equal to the total mass of the reactants.

According the law of conservation of matter the number of reactants and products before and after the reaction should be the same.

But here in the reaction of sodium oxide (Na₂O) with hydrofluoric acid (HF) to produce sodium fluoride (NaF) and water (H₂O) the number of Na and H atoms are not equal on both sides.

Thus the equation Na₂O + HF-> NaF + H₂O does not obey the law of conservation of matter.

To know more about the law of conservation of matter, visit;

https://brainly.com/question/12733091

#SPJ1

Most Cl- and SO42- salts are soluble in water, meaning they dissolve and form a solution.

The solubility of salts in water is influenced by several factors, including the charge and size of the ions, temperature, and pressure. In general, most Cl- (chloride) and SO42- (sulfate) salts are highly soluble in water, meaning they dissolve and form a solution.

This is because Cl- and SO42- ions have a relatively low charge density and are small in size, allowing them to easily interact with water molecules and dissolve.

Most Cl- and SO42- salts are soluble in water, meaning they dissolve and form a solution.

To know more about  solubility of salts click on the link below:

https://brainly.com/question/15596863#

#SPJ11

Molecular Mass liquid methanol. CH3OH has to have a molar mass of 32.04186 g/mol. Calculating ounces For using protons or methanol grammes of methanol Calculation of the molecular weight: 12.0107 + 1.0794*3 + 15.9994 + 1.0794 ›› Composition by percentages each element.

The quantity is in kilograms per mole. Each element has a definite characteristic known as molar mass; for instance, water has a molar mass of approximately 18 g/mol. Furthermore, using the formula, our calculator can determine the mass of materials users really ought to add too your mixture in order to reach the appropriate molar concentration.

CH3OH's number of moles is 32.04186 g/mol.

Estimating approximate molecular weight

12.0107 + 1.00794*3 + 15.9994 + 1.00794

G/mol units are really the place to start for estimating molar mass. when calculating out such a chemical compound's molecular weight.

To know more about Molecular Mass click here

brainly.com/question/18446366

#SPJ4

Solid waste;

Container Trash

used filter paper

Sink

Liquid waste;

acetone rinse

leftover starting material reaction

filtrate

Glass waste;

broken waterless condenser

melting point tube

We have to note that waste has to do with a material that is no longer in use. When we are talking about a waste. We mean something that we can not be able to put out or that we are going to throw away eventually.

We can then know that the wastes can be sorted based on the kind of waste that it is as shown above.

Learn more about waste products:https://brainly.com/question/14018640

#SPJ1

The given reaction is the calcium carbide reaction of calcium hydroxide with water to produce acetylene.

The balanced equation is CaC2+2H2OCa(OH)2+C2H2.

Molar mass of acetylene, C2H2 = 2x12+2x1 = 26 g/mol

we get 64 g of CaC2 becomes 26 g of C2H2. 5.0g CaC2..

Molecular weight of Ca(OH)2=1(atomic weight of Ca)+2(atomic weight of O)+2(atomic weight of H)=40+2(16)+2(1)=40+32+2=74.

For more information on Molecular weight, see:

https://brainly.com/question/27988184

#SPJ1

The total vapor pressure of a solution of benzene and toluene with a mole fraction of xbenzene can be calculated using the Raoult's Law equation:

Where xbenzene is the mole fraction of benzene in the solution.

Raoult's Law states that the vapor pressure of a solution is equal to the sum of the vapor pressures of the individual components of the solution multiplied by the mole fraction of each component. This is true for ideal solutions, meaning that the solution behaves as if each component is acting independently.

Learn more about Raoult's Law equation:

https://brainly.com/question/28304759

#SPJ4

The longest wavelength and energy of light that is generally able to break a chemical bond depends on the strength of the bond and the nature of the bond being broken.

What is wavelength?

Wavelength is a term used in physics to describe the distance between two peaks (or troughs) in a wave. In the context of electromagnetic radiation, such as light, the wavelength is the distance between two consecutive peaks (or troughs) of the wave, and it is usually expressed in units of nanometers (nm), angstroms (Å), or micrometers (µm).

Generally, the bond energy of a chemical bond can be determined by its bond length, bond angle, and the electronegativity difference between the atoms involved in the bond.

In general, covalent bonds, such as those found in organic molecules, have bond energies in the range of 100-500 kJ/mol. To break these bonds, light with wavelengths in the UV region of the spectrum and energies in the range of 10-100 kJ/mol is typically required.

Ionic bonds, such as those found in salts, have higher bond energies, in the range of 400-1000 kJ/mol. To break these bonds, light with wavelengths in the visible or UV region of the spectrum and energies in the range of 50-200 kJ/mol is typically required.

The ability of light to break chemical bonds is related to the photon energy of the light. Photons with higher energies have the ability to break chemical bonds and cause chemical reactions.

The longest wavelength and lowest energy of light that is capable of breaking a chemical bond depends on the strength of the bond and the nature of the bond being broken.

To learn more about wavelength:

https://brainly.com/question/29548846

#SPJ4

when an atom of sodium (na- group 1a alkali metals) and an atom of fluorine (f- group 7a halogen) combine to form the salt sodium fluoride (naf), an ionic bond is formed. which statement correctly describes how the bond is formed?

The correct answer is option d.

d. sodium (na) will donate its one valence electron to fluorine (f). when this occurs, sodium becomes a positively charged ion and fluorine becomes a negatively charged ion, creating the ionic sodium fluoride.

One valence electron, or Na, is present in sodium's outermost orbit. To complete its octet by having 8 electrons in its outermost orbit, sodium needs to lose this one valence electron. Fluorine requires one more electron to complete its octet and have 8 electrons in its outermost orbit. It now has 7 in this orbit. In order to complete their octet, Sodium and Fluorine, respectively, want to gain and lose one electron. They do this by transferring the valence electron from the sodium atom to the fluorine atom, giving sodium a positive charge (+1) and fluorine a negative charge (1). When one atom shares its electrons with its nearby atom, an ionic bond is created between the two atoms.

To know more about ionic bond click here:

brainly.com/question/29772028

#SPJ4

Answer:

D. Sodium (Na) will donate its one valence electron to Fluorine (F). When this occurs, Sodium becomes a positively charged ion and Fluorine becomes a negatively charged ion, creating the ionic bond

Explanation:

A. Fluorine (F) will donate its seven valence electrons to Sodium (Na). When this occurs, Fluorine becomes a negatively charged ion and Sodium becomes a positively charged ion, creating the ionic bond.

B. Fluorine (F) will donate its seven valence electrons to Sodium (Na). When this occurs, Fluorine becomes a positively charged ion and Sodium becomes a negatively charged ion, creating the ionic bond.

C. Sodium (Na) will donate its one valence electron to Fluorine (F). When this occurs, Sodium becomes a negatively charged ion and Fluorine becomes a positively charged ion, creating the ionic bond.

D. Sodium (Na) will donate its one valence electron to Fluorine (F). When this occurs, Sodium becomes a positively charged ion and Fluorine becomes a negatively charged ion, creating the ionic bond

Hector is recognized as a legitimate hero and a fallible yet upright mortal who, in the end, desired peace and gave selflessly to himself and his people instead of for glory or because of rage. Please use the code underneath to acknowledge this web page as the primary material of any content you use from in this page within your own work.

Greek mythology is rife with tales of monsters and gods, which contributes to myths' allure and the durability of their propagation among individuals from all walks and life around the world. While many Greek deities, including Zeus, Hera, Apollo, and Athena, are well-known,

Despite his brother, Hector isn't frequently as well recognized. Hector had no heavenly capabilities, nevertheless his life and demise had great significance. Instead, he matured as a mortal through training and experience in life, eventually to become the greatest of Troy's soldiers. He was reportedly revered both the Greeks and the Romans.

When the Greeks landed at Troy, Hector assumed command of the Trojan Army notwithstanding the his reluctance to engaging in battle with them.

To know more about Hector click here

brainly.com/question/1292696

#SPJ4

Minerals do not include crude oil or natural gas. The most obvious difference between gas and oil is that they lack crystal structures and are not solids. Originally derived from rotting plants and animals, they are organic as well.

Any solid material that is a crystal has its constituent atoms arranged in a specific pattern, and its surface regularity mirrors its internal symmetry.

When it comes to gemstones, only rare, precious, or quasi minerals, like diamond, and even some organic bases, like amber, are used, as opposed to crystals, which can be any element arranged in a geometric form. Although some crystals could be made to sparkle similarly, they are typically cut or polished in a manner that causes the gem shimmer and glisten.

To know more about crystal visit:

https://brainly.com/question/1212769

#SPJ4

The initial pH of the buffer solution prepared from NH4NO3 and NH3 is 8.33. After dilution with water, the pH decreases and becomes closer to 7.0, the neutral pH.

A buffer solution is a solution that can resist changes in pH when small amounts of an acidic or basic substance are added to it. Buffer solutions are used in various applications such as biological systems, chemical analysis, and industrial processes.

pH of Buffer Solution Prepared from NH4NO3 and NH3:

The buffer solution can be prepared by mixing a weak base (NH3) with its conjugate acid (NH4NO3). The initial pH of the buffer solution can be calculated using the Henderson-Hasselbalch equation:

pH = pKa + log([NH3]/[NH4NO3])

where pKa is the acid dissociation constant of the conjugate acid and [NH3] and [NH4NO3] are the molar concentrations of NH3 and NH4NO3, respectively.

Given, the molarity of NH3 = 0.15 M and the molar mass of NH4NO3 = 80.04 g/mol, the molarity of NH4NO3 can be calculated as follows:

Molarity = Mass/Volume x Molar Mass = 5.15 g/0.10 L x 80.04 g/mol = 40.70 M

Therefore, the initial pH of the buffer solution can be calculated as follows:

pH = 9.25 + log(0.15/40.70) = 8.33

New pH after dilution with water:

When the buffer solution is diluted with pure water, its molar concentration decreases, and thus, its pH also changes. However, the change in pH can be minimized by using a large buffer capacity, which is defined as the amount of acid or base that can be added to a buffer solution without causing a significant change in its pH.

Since the buffer capacity is proportional to the concentration of the buffer components, diluting the buffer solution with water decreases its buffer capacity and leads to a significant change in its pH. The new pH after dilution with water can be estimated using the initial pH and the dilution factor.

Given, the final volume of the buffer solution = 5.00 × 102 mL, the dilution factor can be calculated as follows:

Dilution Factor = Final Volume/Initial Volume = 5.00 × 102 mL/0.10 L = 5000

Since the molarity of the buffer components decreases by a factor of 5000, the new pH of the buffer solution can be estimated to be close to 7.0, which is the neutral pH.

Here you can learn more about pH of Buffer Solution

https://brainly.com/question/13169083#

#SPJ11

The one which is not correct lewis structure is, the correct option is :

(C) H - N = F :

           |

           H

The Lewis structure of the molecule NH₂F is as follows :

                    . .

               H - N - F :

                      |

                     H

Total valence electrons = 5 (N) + 2(H)  + 7 (F)

Total valence electrons = 14

The lewis structure for the molecule NH₂F is the trigonal bipyramidal  and the geometry is tetrahedral geometry. The lone pair of electrons present on nitrogen will deviate the shape of the molecule NH₂F. The nitrogen has only one lone pair , so the lone pair - pone pair repulsion do not exists.

To learn more about lewis structure here

https://brainly.com/question/30086378

#SPJ4

According to the stoichiometry of the chemical reaction between magnesium and copper nitrate  42.72 g of precipitate is formed  if we start with 7 g of magnesium metal and 0.5 moles of copper(II) nitrate.

It is the determination of proportions of elements or compounds in a chemical reaction. The related relations are based on law of conservation of mass and law of combining weights and volumes.

Stoichiometry is used in quantitative analysis for measuring concentrations of substances present in the sample.In the given reaction , 24.3 g magnesium gives 148.3 g magnesium nitrate thus, 7 g magnesium will give , 7×148.3/24.30=42.72 g

Thus, 42.72 g of precipitate is formed  if we start with 7 g of magnesium metal and 0.5 moles of copper(II) nitrate.

Learn more about stoichiometry,here:

https://brainly.com/question/9743981

#SPJ1

A tablet weighing 0.940 g was dissolved in dilute sulphuric acid made up to 250 cm³ with water. 25.0 cm³ of this solution was titrated with 0.00160 M K[tex]_2[/tex]Cr[tex]_2[/tex]O requiring 32.5 cm3 of the  K[tex]_2[/tex]Cr[tex]_2[/tex]O. 4.17% is the percentage by mass of  [tex]Fe^{2+}[/tex] in the tablet.

Mass percent is a means to describe a component in a specific combination or to convey a concentration. The mass percentage used to describe the solution composition indicates the mass of solute contained in a given mass of solution. The solute's concentration is specified in terms of mass or moles.

6[tex]Fe^2+[/tex] + [tex]Cr_2O_7^{2-}[/tex] + 14[tex]H^+[/tex] → 6[tex]Fe^{3+}[/tex] + 2[tex]Cr^{3+}[/tex]+ 7H[tex]_2[/tex]O

32.5 cm³x 0.00160 M = 0.052 g of K[tex]_2[/tex]Cr[tex]_2[/tex]O[tex]_7[/tex]

0.052 g / 294.18 g/mol = 0.000177moles of K[tex]_2[/tex]Cr[tex]_2[/tex]O

0.000177 mol / 6 = 0.0000295 mol moles of [tex]Fe^{2+}[/tex]

0.0000295 mol / 0.025 L = 0.00118 M  of  [tex]Fe^{2+}[/tex]

0.00118 M x 55.845 g/mol x 0.025 L = 0.0392 g of  [tex]Fe^{2+}[/tex]

0.0392 g / 0.940 g x 100% = 4.17% percentage by mass of  [tex]Fe^{2+}[/tex]

To know more about mass percentage, here:

https://brainly.com/question/32197511

#SPJ12

At room temperature there will strong intermolecular force in the ionic compound which reduce the solubility of the salt in water. By heating the solution, the solubility can be increased.

Salinity of water is the concertation of the salt per unit volume of water. It can be expressed in g/ml or g/l or ppm as well.

Solubility of a salt is the fraction of its concertation that can be dissolved in a solvent at a particular temperature. For some ionic compound like NaCl, the intermolecular force is stronger at normal temperature.

This force can be reduced by heating the solution and thereby the solvent-solute interaction can be improved, result in better solubility. This in turn increase the salinity of water.

Find more on salinity:

https://brainly.com/question/5082030

#SPJ1

CO2 is a covalent molecule, not an ionic salt. It consists of two oxygen atoms bonded to a central carbon atom through double bonds, forming a linear molecular structure.

What is covalent molecule with examples?

A covalent molecule is a type of molecule that is held together by covalent bonds, which are strong chemical bonds formed by the sharing of electrons between two atoms.

Examples of covalent molecules include water (H2O), carbon dioxide (CO2), methane (CH4), and ethanol (C2H5OH). These molecules have a non-metal composition and typically have low boiling and melting points compared to ionic compounds.

To learn more about covalent molecule, visit: https://brainly.com/question/3447218

#SPJ4

The entropy of a system with two molecules is equal to kB ln 2.

The entropy of a system with two molecules is a measure of the degree of randomness or disorder in the system. According to the concept of entropy, the more possible arrangements or microstates of a system, the higher its entropy.

In the case of a system with two molecules, there are two possible arrangements (the molecules could be in either of two states), so the entropy of the system is equal to kB ln 2, where kB is the Boltzmann constant. This formula reflects the idea that a system with two possible arrangements has more entropy than a system with only one possible arrangement.

To know more about entropy, click here.

https://brainly.com/question/13135498

#SPJ4

The element has an average atomic mass of 207.21 amu, and it is called lead (Pb). LEAD is the element whose average atomic mass is this value (207.21 amu) (Pb).

HOW TO DETERMINE AN ELEMENT'S AVERAGE ATOMIC MASS: The relative atomic masses of all an element's isotopes are added up to determine the element's average atomic mass. The isotopes of an element have the following relative abundances and masses, according to this query: mass 203.973 amu - 1.40 percent. 2. mass 205.9745 amu—24.10%. 3. mass 206.9976 amu - 22.10%. 4. mass 207.9766 amu, a 52.40% decrease. The next step is to divide each percentage abundance by 100 to get its decimal equivalent. mass 203.973 amu minus 0.014. 2. mass 205.9745 - - 0.241 am. 3. mass 206.9759 - 0.221 amu. 4. mass 207.9766 - - 0.524 amu. Next, we add the corresponding decimal abundance to each atomic mass for each element.

Learn more about Lead (Pb) here:

https://brainly.com/question/13242429

#SPJ4

The statement that is false among the given statements is:  the solvation process (alone) usually absorbs heat.

The correct option is 2.

The process of solvation involves the interaction of solvent molecules with the ions or molecules that make up the solute.

Strong interactions between ionized and uncharged molecules and a solvent affect the solvent's viscosity, density, and other properties as well as the solute's solubility, reactivity, and color. These interactions also have an impact on the solute's solubility, reactivity, and color.

Learn more about solvation at: https://brainly.com/question/530845

#SPJ1

We need a thorough understanding of the citric acid cycle in order to address this. This means that every time that citric acid cycle changes turns, 3 NADH molecules are created.

Citrus acid, a naturally occurring organic acid, is present in many fruits, vegetable, including fruit liquids, particularly orange juice. It is not a vital vitamin or nutrient, thus you are not required to include it in their diet.

Citrus with acid is entirely safe. Your body breaks it down, and pee helps to get rid of it. In fact, magnesium oxalate, which causes kidney stones, might be prevented by this. Studies show that citric acid inhibits the growth of stones.

To know more about citric acid visit:

https://brainly.com/question/14273511

#SPJ4

Option a is the right choice because all of these compounds are nonpolar, the combination of them should result in a solution that is completely homogenous because "like dissolves like."

Other pairs will not be able to produce a homogeneous solution due to the limited solubility of nonpolar substances in polar or ionic substances (for instance, LiBr is an ionic material, and C₅H₁₂ is a nonpolar substance).

A homogeneous solution has only one phase present throughout its entirety. It comes into being as a result of the ingredients being utterly dissolved in one another. A material is said to have the quality of solubility if it is soluble in another substance while that substance is present.

The complete question is attached.

Want to know more about the homogeneous solution visit the link which is given below;

https://brainly.com/question/3293242

#SPJ4

12.50 moles of propane react with oxygen, so moles of carbon dioxide will be produced is 37.5 moles.

The reaction of propane with oxygen:

C₃H₈ + O₂ → CO₂ + H₂O (not yet equal)

Balance the reactions by adding the coefficients, to equalize the number of each atom on the left and the right.

                                     C₃H₈ + 5O₂ → 3CO₂ + 4H₂O

Use the ratio of the coefficients to determine the moles of each gas.

Calculating the moles of CO₂ that will be produced if 12.50 moles of propane (C₃H₈):

Moles of CO₂ gas = CO₂ coefficient/propane coefficient x (propane moles)

Moles of CO₂ gas = 3/1 x (12.50)

Moles of CO₂ gas = 37.5 moles

So, the moles of CO₂ that will be produced is 37.5 moles.

Learn more about the moles of CO₂ with propane reaction at https://brainly.com/question/27979447.

#SPJ4