what is the media access method used by ethernet? group of answer choices polling csma/ca csma/cd token passing

Answers

Answer 1

The media access method used by Ethernet is (c) CSMA/CD (Carrier Sense Multiple Access with Collision Detection).

In CSMA/CD, each device on the Ethernet network listens for carrier signals on the network before attempting to transmit data. If a device detects a carrier signal, it waits for the transmission to complete before attempting to transmit its own data.

If two devices attempt to transmit data at the same time, a collision occurs, and both devices stop transmitting and wait for a random amount of time before attempting to transmit again. This collision detection mechanism is essential for preventing data corruption and ensuring that each device has an opportunity to transmit its data fairly.

Polling and token passing are media access methods used by other networking technologies, such as Token Ring and FDDI.

Thus, option C is the correct answer.

You can learn more about ethernet at

https://brainly.com/question/28314786

#SPJ11


Related Questions

In a typical reverse-phase LC procedure, decreasing the polarity of the MP will most likely have what effect on the peaks in the chromatogram?A.the efficiency of the peaks will increaseB.the retention factors for all non-polar compounds will increaseC.the retention times of the peaks will increaseD.tm for the system will increaseE.the retention times of the peaks will decreaseF.the resolution of the peaks will increaseG.tm for the system will decreaseH.the plate height of the peaks will decrease

Answers

In a typical reverse-phase LC procedure, decreasing the polarity of the mobile phase will most likely have the effect on the peaks in the chromatogram that "the retention times of the peaks will decrease". Option E is correct.

What is a reverse-phase LC procedure?

In a reverse-phase LC procedure, the stationary phase has polar groups covalently bonded to a nonpolar support, while the mobile phase is nonpolar. In this type of chromatography, the retention factor increases as the solvent becomes more polar.

To avoid peak tailing and broaden the elution peak, a slight pH shift can be used. The equilibrium is shifted toward the neutral form, resulting in increased retention time for acidic or basic analytes. When the polarity of the mobile phase is decreased, the peaks in the chromatogram's retention times will decrease, hence making option E correct: the retention times of the peaks will decrease.

Among the options given, the most likely effect of decreasing the polarity of the mobile phase on the peaks in the chromatogram is that the retention times of the peaks will decrease.

Learn more about reverse-phase LC procedure https://brainly.com/question/31064802

#SPJ11

which of the following types of storage would you recommend if someone needed a hard drive with fast data access and a small outline?a. Magnetic hard driveb. Solid-state hard drivec. Flash drived. Optical drive

Answers

If someone needs a hard drive with fast data access and a small outline, the type of storage that should be recommended is a Solid-state hard drive (SSD). The correct answer is B.

An SSD, also known as a solid-state drive, is a storage device that employs flash memory to store data. It is smaller in size and faster than a standard hard disk drive (HDD). It has a faster read/write speed than an HDD and consumes less energy than an HDD because it does not have any moving parts.

A magnetic hard drive has moving parts and is slower than an SSD. Optical drives, on the other hand, are used to read data from CDs, DVDs, and Blu-ray discs, and are not suitable for storage purposes. Flash drives are often used for data transfer and storage, but they have a lower storage capacity than an SSD.

Therefore, if someone needed a hard drive with fast data access and a small outline, the type of storage that would be recommended is a Solid-state hard drive (SSD).

You can learn more about Solid-state hard drive (SSD) at

https://brainly.com/question/28476555

#SPJ11

buying a ticket for a college football game where there are multiple windows to buy the ticket at features which type of queuing system line structure?

Answers

Buying a ticket for a college football game where there are multiple windows to buy the ticket at features a multiple queue or multi-line queuing system.

In a multiple queue system, there are multiple waiting lines, and each line is assigned to a specific service station or window. Customers choose the line they want to join based on their preferences, such as the length of the queue or the location of the service station.

In the case of buying a ticket for a college football game, each window represents a service station, and customers can choose to join the line for the window that they prefer or that has the shortest waiting time.

This type of queuing system is often used in settings where there are multiple service stations, such as in retail stores, banks, or amusement parks, to reduce waiting times and improve customer satisfaction.

You can learn more about queuing system at

https://brainly.com/question/17137414

#SPJ11

13. what is the acc support service that is available to all registered students that provides access to things like free tutoring, student-use computers, and skills workshops?

Answers

The ACC (Austin Community College) support service that provides access to free tutoring, student-use computers, and skills workshops to all registered students is called the "Student Learning Labs".

The Student Learning Labs are a network of computer labs located across ACC's campuses that provide access to academic software and resources, as well as a range of support services to help students succeed in their studies. These services include free tutoring, skills workshops, and access to specialized resources for students with disabilities.

The Student Learning Labs are available to all registered ACC students and are staffed by experienced tutors and support professionals who are available to answer questions, provide guidance, and help students achieve their academic goals.

You can learn more about ACC (Austin Community College) at

https://brainly.com/question/30053902

#SPJ11

an author is considering publishing an e-book using a creative commons license. in which of the following situations would it be better for the author to use a creative commons license instead of a traditional copyright? I. the author wants to make the e-book available as a free download. II. the author wants to prevent people from sharing copies of the e-book on peer-to-peer networks. III. the author wants to allow people permission to use and modify the e-book. responses a. i only b. i only c. ii only d. iii only e. i and iii f. i and iii g. ii and iii

Answers

It would be better for an author to use a Creative Commons license instead of a traditional copyright in the following situations: I. The author wants to make the e-book available as a free download. and III. The author wants to allow people permission to use and modify the e-book. The correct answer is F.

What is a Creative Commons license?

The Creative Commons is a non-profit corporation that provides a set of legal tools to the general public free of charge to allow them to share and reuse digital resources such as music, videos, and photographs, among other things. In comparison to traditional copyright licenses, a Creative Commons license is more versatile.

What are the benefits of using a Creative Commons license?

There are numerous advantages to using Creative Commons licensing. It enables the author to retain ownership of the material while providing the public with permission to use, duplicate, or distribute it as long as they comply with the terms of the license specified by the author. Creative Commons licensing also facilitates the modification and distribution of creative works, resulting in the creation of a thriving and dynamic creative environment. As a result, when publishing an e-book, an author may want to consider using a Creative Commons license instead of a traditional copyright to encourage distribution and interaction with the public.

Learn more about Creative Commons here: https://brainly.com/question/17082747

#SPJ11

exercise 4.32 write a method called sum with a while loop that adds up all numbers between two numbers a and b. the values for a and b can be passed to the sum method as parameters.

Answers

Once the loop is done iterating, the value of sum is returned, which is the sum of all numbers between the two values.

To write a method called sum that adds up all numbers between two numbers a and b using a while loop, you can use the following code:

int sum(int a, int b){
   int sum = 0;
   while (a <= b){
       sum += a;
       a++;
   }
   return sum;
}

This code takes two parameters, a and b, and then adds up all numbers between the two values, storing the result in the sum variable. The while loop iterates as long as a is less than or equal to b, and each iteration adds the current value of a to the sum variable, and then increments a.

Learn more about loop here:

https://brainly.com/question/30075492

#SPJ11

is the basic communication protocol of the internet. this protocol is supported by every major network operating system (os) to ensure that all devices on the internet can communicate. a. html b. http c. tcp/ip d. ftp

Answers

C: TCP/IP stands for Transmission Control Protocol/Internet Protocol, and it is the basic communication protocol used on the Internet.

It is a suite of communication protocols used for connecting network devices and sending data between them. TCP is responsible for the reliable transmission of data over the internet, while IP is responsible for routing packets to their destination. It is supported by every major network operating system, which makes it possible for devices from different manufacturers and platforms to communicate with each other. TCP/IP is a fundamental technology that enables the functioning of the internet and is essential for any device that needs to connect to the internet.

Thus, the answer is (c) TCP/IP.

You can learn more about TCP/IP at

https://brainly.com/question/29654287

#SPJ11

Using a wireless technology known as _________, many smartphones can now be tapped on special payment devices to complete your purchase at select stores.A) Wi-FiB) NFCC) BluetoothD) SMS

Answers

The wireless technology known as NFC can be used on many smartphones to tap on special payment devices to complete a purchase at select stores.

NFC stands for Near Field Communication. It is a wireless technology that allows communication between two devices that are near to each other. It is a simple, fast, and secure way to connect with other devices for communication and payment purposes.

Below are some common wireless technologies used in smartphones:

NFC (Near Field Communication), Wi-Fi, Bluetooth, SMS (Short Message Service)

Wi-Fi is a wireless networking technology that is used to connect devices to the internet or other networks. It is widely used in smartphones, tablets, and laptops, to access the internet or other networks without the need for cables or wires.

Bluetooth is another wireless technology that is used in smartphones to connect with other devices such as speakers, headphones, and car audio systems.

SMS (Short Message Service) is a text messaging service that is used to send and receive short text messages between mobile devices, including smartphones, tablets, and other mobile devices. It is one of the most popular and widely used wireless technologies on mobile devices.

Learn more about Near Field Communication here:

https://brainly.com/question/3942098

#SPJ11

True or False: Ensuring that every value of a foreign key matches a value of the corresponding primary key is an example of a referential integrity constraint.

Answers

The given statement "Ensuring that every value of a foreign key matches a value of the corresponding primary key is an example of a referential integrity constraint." is true becasue it correctly illustrates the cocept of  referential integrity.

Referential integrity is a database concept that ensures that relationships between tables remain consistent. One way to enforce referential integrity is by defining a foreign key in a child table that matches the primary key of the parent table. This ensures that every value of the foreign key in the child table matches a value of the corresponding primary key in the parent table, thereby maintaining the integrity of the relationship between the tables.

You can learn more about referential integrity  at

https://brainly.com/question/22779439

#SPJ11

n our network, we notice suspicious activity. we notice a program running on our server that is collecting data and sending it out of the network. which best describes the type of malware in use? nation-state hacking rat apt crypto-malware

Answers

Based on the given scenario, the type of malware in use is likely to be a C: Remote Access Trojan (RAT).

A RAT is a type of malware that provides an attacker with remote access to a victim's computer or network. Once installed, a RAT can enable an attacker to perform various malicious activities, such as collecting sensitive data, modifying system settings, and executing arbitrary code.

In the given scenario, the program running on the server is likely a RAT that has been installed by an attacker to collect sensitive data and send it out of the network. This behavior is consistent with the functionality of a RAT.

Thus, option C is the correct answer.

You can learn more about Remote Access Trojan (RAT) at

https://brainly.com/question/13486164

#SPJ11

You are managing a network and have used firewalls to create a screened subnet. You have a web server that internet users need to access. It must communicate with a database server to retrieve product, customer, and order information.
How should you place devices on the network to best protect the servers? (Select two.)
Put the web server on the private network.
Put the database server inside the screened subnet.
Put the database server on the private network.
Put the database server and the web server inside the screened subnet.
Put the web server inside the screened subnet.

Answers

To protect the servers optimally, the web server should be put inside the screened subnet and the database server inside the private network.

This is because firewalls are used to establish a screened subnet and ensure communication between the web server and the database server is possible. To ensure maximum security, devices should be placed on the network in the following ways:Put the web server inside the screened subnet. Put the database server inside the private network. The screened subnet and the private network are two different networks that have been secured using a firewall. The private network is an internal network that houses important information such as customer information, product information, and order information.

Learn more about web server: https://brainly.com/question/27960093

#SPJ11

which of the following does not promote readability? 1.orthogonality 2.type checking 3.code reusability

Answers

The following does not promote readability is Orthogonality.

Out of the options given, code reusability does not promote readability. When it comes to programming, readability is important. It is the ease with which a programmer can read, understand, and modify code.

Good readability leads to better code maintainability, which makes it easier to fix errors and add new features. So, it is important for a programmer to do Type checking to ensure that code is easier to read, as the programmer knows exactly what data types are being used.

Read more about the expression :

brainly.com/question/1859113

#SPJ11

What is one advantage that the IPv6 simplified header offers over IPv4?-smaller-sized header-little requirement for processing checksums-smaller-sized source and destination IP addresses-efficient packet handling

Answers

Answer:

The IPv6 simplified header is better than IPv4 because the header is smaller.

The size of the IPv6 header is always 40 bytes, which is twice as large as the IPv4 header. But IPv6 gets rid of a few fields in the IPv4 header that are rarely used or have stopped being used over time. For example, IPv6 gets rid of the Header Checksum field because the transport layer protocols (like TCP and UDP) already have their own checksums. This makes the IPv6 header simpler and smaller.

This reduction in header size is good because it improves network efficiency by cutting down on the overhead caused by the header. This means that network resources can be used more efficiently. Also, smaller headers make it easier for routers and other network devices to process packets quickly. This makes it easier to handle packets and improves the performance of the network as a whole.

In which of the following ways which will the words between the HTML tags appear on the screen for the following source code of a webpage: Welcome to the Colombian Coffee Store! graphical user interfaceAs a heading in the browser windowwill allow user interaction

Answers

The words between the HTML tags will appear on the screen for the following source code of a webpage as: As a heading in the browser window.

How will the words appear?

The words between the HTML tags will likely appear as a heading on the webpage. When a person visits a website, the welcome information is often a heading that is well-highlighted and possibly colored to portray an inviting atmosphere.

When the visitor sees this tag, they get the idea that they are welcome and can explore the page for more service offerings and functionalities.

Learn more about HTML here:

https://brainly.com/question/4056554

#SPJ1

When passing a file stream object to a function, you should always pass it by reference.
True
False

Answers

True. When passing a file stream object to a function, you should always pass it by reference.

What is a stream in programming?

In programming, a stream is a sequence of data elements made available over time. A stream can be thought of as items in a pipeline that should be processed in order. Streams are beneficial because they do not have a set size and may not need to fit in memory.A reference in programming is a value that refers to the memory location of an item rather than the value that is contained in the memory location. When a reference is made, the computer may access the value stored in the memory location at any moment.When passing a file stream object to a function, you should always pass it by reference because it has a significant effect on performance. When a file is passed to a function by value, a copy of the file is created, which consumes a significant amount of memory. When the file is passed by reference, the function will utilize the original file without creating a duplicate, reducing memory usage, and optimizing performance.

Learn more about programming

brainly.com/question/11023419

#SPJ11

which tool would help assess a student’s oral language competence and provide documentation of progress?

Answers

It may consist of transcripts of conversations, written assignments, recordings of oral language evaluations, and other documentation of the student's language competence.

The process of gathering, compiling, and preserving written or digital records of information is referred to as documentation. It is a necessary tool for a variety of occupations, such as those in healthcare, education, and business. Documentation is essential in the context of education for monitoring student progress, recording learning goals, and assessing results. It enables educators to document observations, evaluations, and other information that can be utilised to decide on instructional approaches and student requirements. Due to the fact that it serves as a record of the actions and decisions made, documentation also aids in ensuring accountability and transparency. Communication, cooperation, and decision-making can all be improved with the use of effective documentation techniques, both inside and outside of the classroom.

Learn more about  documentation here:

https://brainly.com/question/11440049

#SPJ4

which term best describes a centralized network database containing user account information? openid saml directory service sso

Answers

The term that best describes a centralized network database containing user account information is C: "directory service".

A directory service is a centralized database that stores user and device information, such as usernames, passwords, access controls, and other attributes. It allows network administrators to manage and control access to network resources, such as servers, applications, and files, by authenticating users and devices and enforcing security policies.

Some common examples of directory services include Microsoft Active Directory, LDAP (Lightweight Directory Access Protocol), and Novell eDirectory. These services are used in enterprise-level environments to provide a central point of management and authentication for users and devices across the network.

OpenID and SAML are protocols used for identity federation and single sign-on (SSO), which allow users to access multiple applications with a single set of credentials. However, they do not provide a centralized database for storing user account information like a directory service does.

Thus, option C is the correct answer.

You can learn more about centralized network database at

https://brainly.com/question/17373547

#SPJ11

Mary needs to rename her report.txt file to final_report.txt. Which command will allow her to do this?A. ren report.txt final_report.txtB. ren final_report.txt report.txtC. ren final_report.txtD. ren report.txt to final_report.txt

Answers

A. The command to rename the file from "report.txt" to "final_report.txt" is ren report.txt final_report.txt.

The command that Mary should use to rename her report.txt file to final_report.txt is

option A: `ren report.txt final_report.txt`.

In DOS (Disk Operating System), `ren` command is used to rename one or more files. In addition to renaming a single file, the `ren` command can also rename multiple files with a single command.

The syntax of the `ren` command is as follows:

ren [drive:][path][source_filename] [destination_filename]

The `ren` command requires two arguments:

source_filename and destination_filename.

To rename the source file to the destination file, type the name of the source file followed by the new name of the file to be created. The destination file name should have the same file extension as the original file.

For more such questions on command for renaming , Visit:

https://brainly.com/question/14558241

#SPJ11

The Shannon-Hartley Law states that the channel capacity C (in Mbit/s) at which information can be transmitted over a communication channel is given by C =B log 2(1+NS​), where B is the bandwidth (in MHz) and NS​ is the signal-to-noise ratio. Find the channel capacity of a 16.0-MHz channel with a signal-to-noise ratio of 7.50. The channel capacity is Mbit/s. (Type your answer using the appropriate number of significant digits.)

Answers

The channel capacity of a 16.0-MHz channel with a signal-to-noise ratio of 7.50 is 47.4 Mbit/s

The Shannon-Hartley Law states that the channel capacity C (in Mbit/s) at which information can be transmitted over a communication channel is given by C =B log 2(1+NS​), where B is the bandwidth (in MHz) and NS​ is the signal-to-noise ratio.

Find the channel capacity of a 16.0-MHz channel with a signal-to-noise ratio of 7.50. The channel capacity is Mbit/s. (Type your answer using the appropriate number of significant digits.)The channel capacity of a 16.0-MHz channel with a signal-to-noise ratio of 7.50 is 47.4 Mbit/s.

Using Shannon-Hartley Law, the channel capacity is given by:

C = B log2(1+NS​)Where B = 16.0 MHz and NS = 7.50

Substituting these values into the equation, we get:

C = 16.0 MHz × log2(1+7.50)C = 16.0 MHz × log2(8.50)C = 16.0 MHz × 3.14C = 50.24 Mbit/s.

Rounding this answer to the appropriate number of significant digits, we get 47.4 Mbit/s.

Learn more about  communication engineering:https://brainly.com/question/29352369

#SPJ11

write a program that prompts the user to input a string and outputs the string in uppercase letters using dynamic arrays.

Answers

To create a program that prompts the user to input a string and outputs the string in uppercase letters using dynamic arrays, the following steps should be followed:

Step 1: Begin by including the header files that contain the necessary libraries to perform the operations of the program.

The header files to be included are instream types string

Step 2: Declare the main() function that will prompt the user to input a string and output the string in uppercase letters using dynamic arrays. Step 3: Declare a character pointer and assign memory to it dynamically. This will store the string entered by the user.

Step 4: Use the get line() function to read the string entered by the user into the dynamic character array.

Step 5: Use a for loop to convert each character in the string to its uppercase equivalent using the upper() function.

Step 6: Output the uppercase string to the console. Below is the program code that prompts the user to input a string and outputs the string in uppercase letters using dynamic arrays:#include

#include

#include

using namespace std;

int main()

{

 char *ptr;

 ptr = new char[100];

 cout << "Enter a string: ";

 cin.getline(ptr, 100);

 for (int i = 0; i < strlen(ptr); i++)

 {

    ptr[i] = toupper(ptr[i]);

 }

 cout << "The uppercase string is: " << ptr << endl;

 delete [] ptr;

 return 0;

}Note that after the memory has been allocated to the dynamic character array, it is important to delete the memory when it is no longer needed. This is achieved using the delete[] operator.

Read more about arrays:

brainly.com/question/28061186

#SPJ11

Mr. Lowe is a network administrator who plans on purchasing a switch that will be the part of a network for a new fast-growing fast food joint named Momos & More (M&M). The team at M&M has specifically told Mr. Lower that even though the current need of the network is two fiber-optic connections, it is planning on a significant expansion in the coming years. This expansion will include a fiber-topic connectivity to every desktop in the organization. Analyze what Mr. Lowe should do in this situation.a. Order a switch with the current demand numberb. order switches that allow upgradeable interfacesc. order media convertorsd. use APC ferrules

Answers

If Mr. Lowe chooses to purchase a switch that only accommodates the organization's current need for two fiber-optic connections, he could have to replace the switch when the network is expanded.

Which network topology type enables you to view the media being utilised and the end devices connected to which intermediary devices?

Physical topology: This type of network topology describes how computer wires and other network devices are laid out.

What protocol is in charge of giving hosts on the majority of networks IP addresses that are dynamically assigned from the network?

A client/server protocol called Dynamic Host Configuration Protocol (DHCP) automatically assigns an Internet Protocol (IP) host with an IP address and other configuration data like the subnet mask.

To know more about network visit:-

https://brainly.com/question/14276789

#SPJ1

Question 10 0 / 1 pts What is the correct syntax to define a generic class with multiple bounded parameters? public class MyClass , Type2 extends > {...} public class MyClass {...} public class MyClass extends , Type2 > {...} O public class MyClass extends {...}

Answers

The syntax to define a generic class with multiple bounded parameters is `public class MyClass {...}`

Generics were first introduced in the Java SE 5 release as a way to handle type-safe objects. A generic class in Java is a class that can handle a collection of objects of different types. Generics provide a way to define type-specific classes, and Java supports it fully. It is an essential feature of Java programming that allows developers to write robust, reusable, and type-safe code.

To define a generic class with multiple bounded parameters, we can use the syntax shown below:

public class MyClass {...}`

In the above syntax, `Type1` and `Type2` are generic parameters that can take values of any type that extends the specified bound type, `Bound1` and `Bound2`, respectively.

The correct syntax to define a generic class with multiple bounded parameters is given below.

`public class MyClass {...}`

Therefore, option D is the correct answer.

To know more about "syntax", visit: https://brainly.com/question/31143468

#SPJ11

How to open NAT type for multiple PC's?

Answers

Opening NAT type for multiple PCs requires you to create a static IP address and forwarding ports on your router. This will allow the router to allocate a specific IP address to each device that will always be the same.

Opening NAT type for multiple PC's- To open NAT type for multiple PCs, follow the steps below:

Step 1: Get the MAC addresses of all PCs. Ensure that you have the MAC addresses of all the devices that you want to connect to the network. The MAC address is the unique address that identifies each device on the network. To find the MAC address on a PC, open the command prompt and type "ipconfig/all"

Step 2: Reserve an IP address for each device. Once you have the MAC addresses, you can reserve an IP address for each device. This ensures that each device will always have the same IP address. You can do this by logging into your router and creating a static IP address.

Step 3: Port forwarding. Once you have created static IP addresses, you will need to forward the ports for each device. This involves opening the required ports for each device on your router. This can be done by accessing your router settings and forwarding the required ports. To do this, you will need to know which ports to forward for each device. You can find this information online, or by contacting the manufacturer of your devices.

To learn more about "open NAT", visit:  https://brainly.com/question/31143418

#SPJ11

T/F: regarding coding categories, researchers strive to make their work theoretically grounded and justifiable since improperly developed and applied methods will generate meaningless data.

Answers

True. Researchers work hard to theoretically underpin and justify their coding category study since poorly designed and implemented procedures might lead to the production of useless data.

Coding categories refers to the division of data into various categories or themes in accordance with predetermined standards or patterns that appear in the data. This method is frequently applied in qualitative research to find and group recurrent themes, patterns, or concepts in a data set. A crucial phase in the research process is the creation of coding categories since it ensures that the data is appropriately recorded, evaluated, and interpreted. Researchers must carefully examine the data to find pertinent themes or patterns, which are then put into theoretically-based categories that are pertinent to the study issue.

Learn more about coding category here:

https://brainly.com/question/17815631

#SPJ4

a data center administrator is setting up new fiber drops and needs a commonly used connector since they are specific only to multi-mode networks. which connector should the administrator use?

Answers

The LC connector is a popular choice for multi-mode networks (Lucent Connector).

Choose all that apply to the following list of typical fibre optic cable connector types.

Fiber optic connectors can be found in the following types: LC, SC, MTP/MPO, ST, and FC. The most popular main fibre optic connector is the LC connector because of its small size, great performance, and simplicity of usage.

Which of these is a typical fiber-optic cable management part that terminates numerous connections?

Ferrules are the connector's end parts that have a connection and termination method. Some ferrules screw the two components together after plugging into a corresponding adaptor.

To know more about networks visit:-

https://brainly.com/question/14276789

#SPJ1

the transport layer uses port numbers to identify the source and destination application-layer protocol of the data that it contains.True or false

Answers

The given statement "the transport layer uses port numbers to identify the source and destination application-layer protocol of the data that it contains" is true. It is becasue the transport layer in the TCP/IP protocol suite uses port numbers to identify the source and destination application-layer protocol of the data that it contains.

Port numbers are 16-bit unsigned integers that range from 0 to 65535. The first 1024 port numbers are reserved for well-known services such as HTTP, FTP, and SMTP, while the remaining port numbers can be used by applications or services as needed. When data is sent from an application, the transport layer in the operating system adds a source port number to identify the application that is sending the data, and a destination port number to identify the application that is intended to receive the data.

When the data arrives at the destination, the transport layer uses the destination port number to deliver the data to the correct application.

You can learn more about transport layer  at

https://brainly.com/question/30426969

#SPJ11

What is considered the most effective way to mitigate a worm attack?Change system passwords every 30 days.Ensure that all systems have the most current virus definitions.Ensure that AAA is configured in the network.Download security updates from the operating system vendor and patch all vulnerable systems.

Answers

Option -D:The most effective way to mitigate a worm attack is to download security updates from the operating system vendor and patch all vulnerable systems.

It is important to keep systems up-to-date with the latest security patches to prevent the spread of worms and other malware infections.To avoid worm attacks, it is crucial to implement strong security measures, such as the following:Download security updates from the operating system vendor and patch all vulnerable systems.Keep your antivirus and antimalware software up-to-date to ensure that you have the most current virus definitions and signatures. Ensure that AAA is configured in the network, which stands for Authentication, Authorization, and Accounting.

This technology is used to secure and manage user access to network resources.Change system passwords every 30 days. This helps to prevent unauthorized access to your systems and network devices.There are other steps you can take to improve your system's security, such as using firewalls, setting up intrusion detection systems, and configuring network segmentation. To prevent worm attacks, you should also educate your users about how to avoid phishing emails, spam, and other forms of social engineering that can be used to spread malware infections.Thus the correct answer is Download security updates from the operating system vendor and patch all vulnerable systems.

For such more questions on worm attack:

brainly.com/question/20597348

#SPJ11

six high-technology companies joined forces to produce and market their products in japan. by joining together, these companies were able to enter the japanese market for the first time. this is an example of a consortium.

Answers

The given statement "Six high-technology companies joined forces to produce and market their products in Japan. By joining together, these companies were able to enter the Japanese market for the first time. this is an example of a consortium." is true because that is a group of two entities.

A consortium is a group of two or more people, businesses, or other entities that come together to achieve a specific objective. Members of a consortium collaborate and pool their resources to increase their chances of success in the achievement of their goals.The high-technology companies joining forces to produce and market their products in Japan is an example of a consortium. By combining their efforts, these six companies can improve their prospects of success in the Japanese market. Through this partnership, the six companies would have shared resources, knowledge, and expertise, which would have improved their capabilities to penetrate the Japanese market.

Learn more about consortium: https://brainly.com/question/29486299

#SPJ11

To determine the network ID of an IP address, computers use a logical AND operation between the IP address and the subnet mask. True or False.

Answers

The given statement "To determine the network ID of an IP address, computers use a logical AND operation between the IP address and the subnet mask." is true becasue when a computer receives an IP address and a subnet mask, it can determine the network ID by performing a logical AND operation between the two values.

The subnet mask is a binary value that has a 1 in each bit position corresponding to the network bits in the IP address and a 0 in each bit position corresponding to the host bits. By performing a logical AND operation between the IP address and subnet mask, the computer effectively "masks out" the host bits and only retains the network bits, which results in the network ID. This information is essential for routing data between networks in a TCP/IP-based network.

You can learn more about logical AND operation  at

https://brainly.com/question/13524798

#SPJ11

when a stream slows abruptly as it enters the still water of a lake or ocean (see above photograph), the sediment settles out to form a nearly flat landform called a(n):

Answers

When a stream slows abruptly as it enters the still water of a lake or ocean, the sediment settles out to form a nearly flat landform called a delta.

What is a delta?

A delta is a landform composed of sediment deposited where a river flows into an ocean or lake. Deltas are created when a river loses speed and, as a result, drops its sediment load. Deltas are formed when sediment accumulates in the still waters of rivers, estuaries, or oceans, such as a lake or sea, and forms a mound or fan shape over time. Deltas are typically divided into three areas: the lower delta plain, the upper delta plain, and the pro-delta.

Here are some characteristics of a delta: It is a landform that extends into the water.It is typically shaped like a fan or a bird's foot.The river that feeds it regularly changes its course.The materials that are deposited are generally composed of sand, silt, and clay.

Learn more about delta:https://brainly.com/question/908390

#SPJ11

Your question is incomplete but probably the complete question is :

A stream also slows abruptly when it enters the still water of a lake or ocean. The sediment settles out to form a nearly flat landform called this, which forms and grows with time where a stream deposits its sediment as it flows into a lake or the sea.

Other Questions
what happens after the mysterious figure is unmasked is the cell-free dna screening can be done instead of amniocentesis and has the same results with less risk? QUESTION THREE (30 Marks) a) For a group of 100 Kiondo weavers of Kitui, the median and quartile earnings per week are KSHs. 88.6, 86.0 and 91.8 respectively. The earnings for the group range between KShs. 80-100. Ten per cent of the group earn under KSHs. 84 per week, 13 per cent earn KSHs 94 and over and 6 per cent KShs. 96 and over. i. Put these data into the form of a frequency distribution and obtain an estimate of the mean wage. 15 Marks a firm receives $10 per unit at an equilibrium level of output of 80 units. the average total cost at 80 units of output is $8. the firm makes a total economic profit of: glenda is studying early uses of forensic techniques. what fact is she most likely to learn? a. americans opened the first forensic lab in the 1800s. b. the chinese were using fingerprinting in the 700s. Question 4 (12) A potter was pushing a patient from the ward with a wheelchair of 60 cm diameter of back wheels to the ambulance; the ambulance parked 50 m away from the ward. 4.1. How many times will the back wheels of the wheelchair turn in 50 m? (3) 4.2. Calculate the circumference of the back wheels of the wheelchair in meters (3) 4.3. If the radius of the small wheel above is 8cm, calculate its circumference in meters. 4.4. How many times does the small wheel turn in 50 m? (3) (3) 18C Mostly cloudy question in what quadrant does the terminal ray of the angle lie? select quadrant i, quadrant ii, quadrant iii, or quadrant iv. As animal nutritionist working. ain on different ways animals obtain their food, design ciposter on how goats feed from birth to maturity. fill in the blank. moral reasoning based on instrumental orientation tends to occur at the level of moral thinking 17. Which Of These Partial Proteins Was Most Likely Assembled By A Thermophile? A. Gly-Gly-Pro-Arg-Arg-Cys-Cys-Gly B. Cys-Met-Met-Arg-Asp-Asp-Asp-Pro C. Pro-Pro-Arg-His-Pro-Pro-Pro-Gly D. Met-Gly-Cys-Pro-Arg-Arg-Pro-Arg a single nucleotide deletion during dna replication Which of these has been a major development in global trade since the 1990s? In clonal selection of B cells, which substance is responsible for determining which cells will eventually become cloned?a. antigenb. interferonc. antibodyd. complement Which 2 organisms in the picture are most closely related? How do you know? ________ constrain a firm's ability to export its products by raising the price of the exported product, which could put the firm at a competitive disadvantage with domestic firms in that country. or the substituted cyclohexane compound shown, identify the atoms that are cis to the hydroxyl (oh) substituent. Company A is preparing a deal to acquire company B. One analyst estimated that the merger would produce 85 million dollars of annual cost savings, from operations, general and administrative expenses and marketing. These annual cost savings are expected to begin two years from now, and grow at 2.5% a year. In addition the analyst is assuming an after-tax integration cost of 0.1 billion, and taxes of 20%. Assume that the integration cost of 0.1 billion happens one year after the merger is completed (year 1). The analyst is using a cost of capital of 10% to value the synergies. Company Bs equity is trading at 2.3 B dollars (market value of equity). Company A is planning to pay a 32% premium for company B.Compute the value of the synergy as estimated by the analyst. Please show your calculations. Synergy = ? million dollars Micah prefers to always sous vide his meats in order to take the guesswork out of the cooking. However, he also likes his meat to have a char or the occasional caramelization. How can he achieve this? a. a quick pan fry after the sous vide b. broil the meat before the sous vie c. deep fry the meat before the sous vide d. grill the meat after the sous vide Find X using the picture below. Why did some Europeans believe that relinquishing political control of colonies in Asia and Africa during the twentieth century could be beneficial?