What is the meaning of theoretical yield?

Sodium and potassium will react with water to form hydroxides with chemical formula as,NaOH  and KOH ,and RuOH.

Chemical  formula is a way of representing the number of atoms present in a compound or molecule.It is written with the help of symbols of elements. It also makes use of brackets and subscripts.

Subscripts are used to denote number of atoms of each element and brackets indicate presence of group of atoms. Chemical formula does not contain words. Chemical formula in the simplest form  is called empirical formula.

Learn more about chemical formula,here:

https://brainly.com/question/29031056

#SPJ1

The new volume of the gas sample will be 1.86 L at 288.5 K.

The volume of a gas sample can be calculated from the equation of Charles's law given below.

Where

V1 and T1 are the initial volume and temperature, and V2 and T2 are the final volume and temperature.

Rearranging the equation, we can find the final volume:

V2 = V1 * T2 / T1 = 1.95 L * 288.5 K / 301.5 K = 1.86 L

Learn more about the volume and temperature of gas at: https://brainly.com/question/17100204

#SPJ1

When the free energy of the reaction is lower in the products than it is in the reactants, the reaction is exergonic.

An exergonic reaction is a spontaneous chemical reaction that releases energy as a result of the products having lower free energy than the reactants. This means that the reaction can occur spontaneously without the need for additional energy input. The difference in free energy between the reactants and the products determines the amount of energy that is released during the reaction. In contrast, an endergonic reaction is a non-spontaneous chemical reaction that requires energy input to occur, and the free energy of the products is higher than that of the reactants.

You can learn more about exergonic reaction at

https://brainly.com/question/1560981

#SPJ4

The forward reaction rate constant divided by the reverse reaction rate constant is equal to the equilibrium constant.

To learn more about equilibrium refer to:

https://brainly.com/question/18849238

#SPJ4

The boiling point or temperature at which methane molecule, CH₄, in its liquid state starts to form vapours is equals to the -258.9°F.

Methane: The molecular formula of methane is CH₄. Like other chemical compounds, methane also has physical properties, including boiling point, melting point, freezing point, etc. The boiling point is the temperature at which methane becomes a gas. The boiling point is the temperature at which the pressure exerted by the surroundings on the liquid equals the pressure exerted by the vapor of the liquid. It is a molecule with no hydrogen bonding (visible only between N/O/F and H), and since hydrogen bonding is by far the strongest intermolecular force, methane boils the coldest. It also has no permanent dipole permanent dipole forces due to it being tetrahedral so all the dipoles cancel and thus boils at a very low -162 °C. Therefore, the boiling point of methane is -258.9°F.

For more information about boiling point, visit :

https://brainly.com/question/4219986

#SPJ4

The C₃H₆ lewis structure is as follows :

    H       H

     ..        ..

    C :: C : C : H

     °°      °°     °°

     H      H    H

The C₃H₆ that is the Propene is the  lewis structure that has three Carbon atoms (C) is at the center and the carbon atoms are surrounded by the Hydrogen atoms (H). The compound will contains the six C-H bonds, the one C-C bond and the one C=C bond. The propene is the unsaturated hydrocarbon.

The Lewis structures, also called as the Lewis dot formulas, or the Lewis dot structures, or the electron dot structures, or the Lewis electron dot structures.

To learn more about lewis structure here

https://brainly.com/question/20300458

#SPJ4

The Lewis structure for C3H6 (propene) is created by connecting 3 carbon atoms in a row with single bonds, attaching 6 hydrogen atoms, and then distributing the remaining valence electrons such that a double bond is created between the first two carbon atoms.

The Lewis structure for C3H6, also known as propene, involves a process to account for all electrons.

1. First, calculate the total amount of valence electrons. Carbon (C) has 4 valence electrons and Hydrogen (H) has 1 valence electron. So, the total valence electrons will be (3*4) + (6*1) = 18.

2. Draw the skeletal structure. Place the 3 carbon atoms in a row and connect them with single bonds. Then, attach the 6 hydrogen atoms to the carbon atoms. This initial structure will take up 8 electrons (4 bonds).

3. Distribute the remaining electrons. 10 electrons remain which form a double bond between the first and second carbon atoms, and the rest are evenly distributed to the terminal carbons, completing their octets.

4. The final Lewis structure would be H2C=CH-CH3. The first and second carbon atoms are connected by a double bond.

https://brainly.com/question/34227159

Scientists can use spectroscopy to measure evidence that electrons can move from one energy level to another. Scientists can measure the energy added when electrons absorb energy and move to higher energy levels.

Spectroscopy is a technique that involves shining light on a material and measuring how that material absorbs or emits light at different wavelengths. When electrons move from one energy level to another, they can absorb or emit photons of light, which results in a characteristic spectral signature.

Learn more about spectroscopy on:

The balanced chemical equation for the combustion of diesel is 2 C₁₆H₃O+15 O₂[tex]\rightarrow[/tex]32 CO₂ +3 H₂O.

Chemical equation is a symbolic representation of a chemical reaction which is written in the form of symbols and chemical formulas.The reactants are present on the left hand side while the products are present on the right hand side.

A plus sign is present between reactants and products if they are more than one in any case and an arrow is present pointing towards the product side which indicates the direction of the reaction .There are coefficients present next to the chemical symbols and formulas .

The first chemical equation was put forth by Jean Beguin in 1615.By making use of chemical equations the direction of reaction ,state of reactants and products can be stated. In the chemical equations even the temperature to be maintained and catalyst can be mentioned.

Learn more about chemical equation,here:

https://brainly.com/question/28294176

#SPJ9

Bi is the element that has the lowest 1st ionization energy. Therefore, the correct option is option D.

The energy needed to ionise an atom or an ion in its gaseous form is equal to the energy needed to remove an electron from it. A positive ion is created when an atom loses one of its electrons, creating a species that is positively charged. The ionisation energy is represented in kilojoules per mole (kJ/mol) or electron volts (eV), which are common measures of energy per mole.

The five alternatives for elements are all members of the same group. As the group grows and the valence electrons are less tightly bonded, the value of ionisation energy (IE) decreases. Since Bi is the last element, it has the lowest IE in this scenario.

Therefore, the correct option is option D.

To know more about ionization energy, here:

https://brainly.com/question/33907239

#SPJ12

Your question is incomplete but most probably your full question was,  

which element has the lowest 1st ionization energy?

A. As

B. P

C. N

D.Bi

E. Sb

The formula for boiling point elevation is ΔTb = i×Kb×m. Where, i is the Van't Hoff factor, Kb is the ebullioscopic constant and m is the molality of the solute.

Generally, the boiling point elevation is defined as the difference in temperature that is created between the boiling point of the pure solvent and the boiling point of the solution. Basically, on the graph, the boiling point elevation is represented by ΔTb.

Basically, the molal boiling-point elevation constant is equal to the change in the boiling point for a 1-molal solution occurs in a nonvolatile molecular solute.

Molal elevation constant can be generally defined as the elevation in boiling point which is produced when one mole of non-volatile solute is dissolved in 1 kg i.e. 1000 g of the solvent. This constant is also known as the ebullioscopic constant. Hence, the unit of molal elevation constant is K Kg mol - 1 .

Learn more about boiling point elevation from the link given below.

https://brainly.com/question/16922336

#SPJ4

The VSEPR geometry for the carbon atom in the transition state would depend on the specific molecule and reaction being considered.

VSEPR, or Valence Shell Electron Pair Repulsion, the theory is used to predict the shape of molecules based on the distribution of electron pairs around the central atom. In a transition state, the molecule is in a high-energy, intermediate stage of a chemical reaction, and its shape may be different from the starting materials or final products.

The VSEPR geometry of the carbon atom in the transition state would depend on the specifics of the molecule and reaction, including the number of electron pairs around the carbon atom and the types of atoms bonded to it. To determine the VSEPR geometry for a specific transition state, it is necessary to have detailed information about the molecule and reaction in question.

Learn more about VSEPR geometry:

https://brainly.com/question/14225705

#SPJ4

The mass of magnesium chloride produced in the reaction is 4.17 grams.

The balanced chemical equation for the reaction between Mg and HCl is:

Mg + 2HCl → MgCl2 + H2

To solve this problem, we need to determine which reactant is limiting and use its stoichiometry to calculate the amount of product produced.

First, we need to find the number of moles of Mg and HCl used in the reaction:

moles of Mg = 4.00 g / 24.31 g/mol = 0.1643 mol

moles of HCl = 3.20 g / 36.46 g/mol = 0.0878 mol

According to the balanced equation, the reaction uses 1 mole of Mg for every 2 moles of HCl. Therefore, Mg is in excess and HCl is the limiting reagent.

The stoichiometry of the balanced equation tells us that 2 moles of HCl produce 1 mole of MgCl2. So, the number of moles of MgCl2 produced can be calculated as:

moles of MgCl2 = 0.0878 mol HCl × (1 mol MgCl2 / 2 mol HCl) = 0.0439 mol MgCl2

Finally, we can calculate the mass of MgCl2 produced using its molar mass:

mass of MgCl2 = 0.0439 mol × 95.21 g/mol = 4.17 g

Therefore, the mass of magnesium chloride is 4.17 grams.

To know more about mass:

https://brainly.com/question/15199003

#SPJ4

The bond order of N₂ is three.

Generally, bond order is described as the number of bonding pairs of electrons that is present between two atoms. Basically, between two atoms in a covalent bond, the bond order of a single bond is of one, the bond order of a double bond is of two, and the bond order of a triple bond is of three, and trend goes so on.

Mathematically,

Bond order = [Bonding molecules' number of electrons – Antibonding molecules' number of electrons] × 1/2.

Hence, bond order of both N2+ and N2- is 3, but according to the molecular orbital theory, N2- has more antibonding electrons than N2+.

Learn more about bond order from the link given below.

https://brainly.com/question/12447843

#SPJ4

The value of Ka constant for acetic acid is 1.75 × 10⁻⁵.

Generally, the acid dissociation constant (Ka) is used to distinguish strong acids from weak acids. Strong acids generally have exceptionally high Ka values. The Ka value is obtained by looking at the equilibrium constant for the dissociation of the acid. The higher is the Ka, the more the acid dissociates into its ions.

Ka is defined as the acid dissociation constant whereas pKa is simply the -log of the constant Ka. Similarly, Kb is defined as the base dissociation constant, whereas pKb is the -log of the constant Kb.

Learn more about dissociation constant from the link given below.

https://brainly.com/question/28197409

#SPJ4

Molarity and molality are both measures of concentration of a solute in a solution, but they are different in their units and how they are calculated.

Molarity (M) is termed as number of moles of the solute per liter of the solution. Molarity is expressed in moles per liter (mol/L) or sometimes written as "M." For example, a 1 M solution of NaCl contains 1 mole of NaCl dissolved in 1 liter of solution.

Molality (m) is termed as the number of moles of solute per kilogram of the solvent. Molality is expressed in the moles per kilogram (mol/kg). For example, a 1 mol/kg solution of NaCl contains 1 mole of NaCl dissolved in 1 kilogram of solvent (usually water).

The main difference between the molarity and the molality is that molarity is based on the volume of solution, while molality is based on mass of the solvent. This means that molarity is affected by changes in temperature and pressure, whereas molality is not.

To know more about Molarity here

https://brainly.com/question/8732513

#SPJ4

The density of dinitrogen monoxide gas at exactly 20 °C and exactly 1 atm is 1.83 g/L.

The problem states that we can treat this gas as an ideal gas, therefore, we can use the equation of an ideal gas which is:

PV = nRT

Now, the density (d) is calculated as:

d = m/V

We can rewrite above equation,

m = d*V

Now, the moles (n),

n = m /MM

The ideal gas equation is,

d = P * MM / RT

The molar mass of N₂O is 44 g/mol.

So, replacing all the data we have:

[tex]d = \dfrac{1 \times 44}{0.082 \times 293}[/tex]

d = 1.83 g/L

To know more about the ideal gas equation, here

brainly.com/question/28837405

#SPJ4

Answer: It has something to do with the enthalpy

Explanation: Remember that positive enthalpy is when heat is being absorbed, which is shown in this case.

Famotidine is the name of the generic version of Pepcid, a drug used to treat gastroesophageal reflux disease (GERD).

Famotidine is a member of a group of drugs known as histamine-2 (H2) blockers, which lessen the formation of stomach acid. Famotidine can aid in the relief of GERD symptoms such heartburn, regurgitation, and difficulty swallowing by lowering the quantity of acid in the stomach. There are several different formulations of famotidine, including tablets, capsules, and oral suspension.

Famotidine is a medication that belongs to a class of drugs known as histamine-2 (H2) blockers. It is used to decrease the production of stomach acid and is commonly used to treat conditions such as gastroesophageal reflux disease (GERD), peptic ulcer disease, and Zollinger-Ellison syndrome.

It works by blocking the action of histamine, a chemical in the body that stimulates the stomach to produce acid. By reducing the amount of acid in the stomach, famotidine can help relieve the symptoms of acid reflux and ulcers, such as heartburn, indigestion, and stomach pain.

To learn more about Famotidine :

https://brainly.com/question/29428125

#SPJ4

Xenon difluoride (XeF₂) is a non-polar compound.

Generally covalent compounds in which there is no electronegativity difference are defined as non-polar covalent compounds. In these type of compounds, there is no change of electronegativity such that there is no motion of bond pair of electrons moving towards the bonded atoms. Non-polar compounds usually possess symmetrical polar bonds that can cancel out some sort of net dipole.

In Xenon difluoride molecule fluorine and xenon atoms generally forms two covalent bonds (Xe-F) with each other. Fluorine atom usually attracts bonded electron pair towards itself due to higher electronegativity. Then fluorine usually acquires a negative charge while xenon acquires a positive charge. And the compound becomes non-polar.

Learn more about non-polar compound from the link given below.

https://brainly.com/question/15173422

#SPJ4

The expected boiling points of the compounds, in order from highest to lowest, would be CH3OH > CH3Cl > CH4

CH3OH - Methanol is a polar organic compound with a boiling point of 64.7°C.

CH4 - Methane is a non-polar organic compound with a boiling point of -164°C.

CH3Cl - Chloromethane is a polar organic compound with a boiling point of 40.1°C.

Therefore, the expected boiling point order is CH4 < CH3Cl < CH3OH.

The temperature at which a material transforms from a liquid into a gas is known as its boiling point.This is usually determined by the vapor pressure of the substance; when the vapor pressure of a liquid is equal to the atmospheric pressure, it boils and changes to a gas.

learn more about  boiling point Refer:brainly.com/question/2153588

#SPJ4

When sulphide ore is roasted the sulphide ores generally gets converted to their respective oxides and the impurities are also oxidised and removed.

Generally roasting is defined as the process in which the mainly sulphide ores are heated below their melting point in presence of air. The sulphide ores are converted to their respective oxides and the impurities are also oxidized and removed.

During the process of roasting, the ore or the ore concentrate is treated with very hot air. Roasting is the process that is generally applied to sulfide minerals. During the process of roasting, the sulfide ore is usually converted to an oxide, and sulfur is released as sulfur dioxide, a gas.

Learn more about roasting from the link given below.

https://brainly.com/question/29280192

#SPJ4

The types of the nonequivalent protons are present in each of the molecules is :

a) 4

b) 4

c) 2

The proton that is having the different environment and all the protons will give the different peaks is the non equivalent proton and if the proton will shares the same environment and all the protons will gave the same singles or the  peaks called as the  the equivalent protons.

a) 6 H will produce the same 1 signal and the 2 carbon and the 4 hydrogen will produce the 1 signal and same as the 3 carbon and the 4 hydrogen will produce the 1 signal and last 4 carbon will produce 1 signal.

b) The compound also contains the 4 non equivalent proton .

c)  The 1 signal and 1 equivalent proton and 2 will produce 1 signal so. The total 2 non equivalent proton.

To learn more about non equivalent proton here

https://brainly.com/question/30255368

#SPJ4

To determine the total energy of the reaction, we need to calculate the energy required to break the bonds in the reactants and the energy released when new bonds are formed in the products.

2H-O: 2 x 467 kJ/mol = 934 kJ/mol

1O=O: 1 x 498 kJ/mol = 498 kJ/mol

In the products, we have four H-H bonds and one O=O bond:

4H-H: 4 x 432 kJ/mol = 1728 kJ/mol

1O=O: 1 x 498 kJ/mol = 498 kJ/mol

Total energy of the reaction = energy released - energy required = 2226 kJ/mol - 1432 kJ/mol = 794 kJ/mol

To know more about total energy , check out :

https://brainly.com/question/14427111

#SPJ1

Examples of colligative properties include boiling point elevation, freezing point depression, vapor pressure lowering, and osmotic pressure.

Examples of non-colligative properties include color, density, and refractive index. These properties depend on the identity of the solute particles and not on their concentration.

Colligative properties are properties of a solution that depend on the concentration of solute particles in the solution and are independent of the identity of the solute particles. Non-colligative properties, on the other hand, are properties of a solution that are dependent on the identity of the solute particles.

It is important to note that while colligative properties are not affected by the identity of the solute particles, they do depend on the number of particles in the solution. Therefore, colligative properties can be used to determine the molecular weight of a solute or the degree of dissociation of an ionic compound.

Find out more about colligative property or a non-colligative property

brainly.com/question/29971068

#SPJ4

The type of intramolecular force is the bond between Carbon and Oxygen in CO₂ is polar covalent bond.

A polar covalent bond is defined as a type of covalent bond in which the atoms have an unequal attraction for electrons, and so the sharing is unequal. In a polar covalent bond, which is sometimes also called as a polar bond, the distribution of electrons around the molecule is no longer symmetrical.

The type of bond present between the atoms in a molecule of CO₂ is polar covalent bond. In a molecule of carbon dioxide, a carbon atom is joined by four covalent bonds to two oxygen atoms, which have two covalent bonds each.

Learn more about polar covalent from the link given below.

https://brainly.com/question/10777799

#SPJ4

The statement that is not true about proteins is "Proteins are naturally acidic." Option C is correct.

Proteins are biological macromolecules made up of long chains of amino acids. They are also referred to as polypeptides because they are composed of multiple peptide bonds between the amino acids. The specific sequence and arrangement of amino acids in the polypeptide chain determine the unique 3D structure and function of the protein.

Proteins can have a structure characterized by loops, bends, and twists, and this structure is held together by a variety of intermolecular interactions, including hydrogen bonds, disulfide bonds, electrostatic interactions, and van der Waals forces.

While some amino acids have acidic or basic side chains, proteins as a whole are not necessarily naturally acidic. The overall charge of a protein is dependent on the charge of its constituent amino acids and the pH of the surrounding environment.

To know more about proteins here

https://brainly.com/question/30258984

#SPJ4

--The given question is incomplete, the complete question is

"All of the following statements are true about proteins except. -Proteins can have a structure characterized by loops, bend, and twists. A) Proteins are composed of amino acids. B) Proteins are polypeptides C) Proteins are naturally acidic. D) Hydrogen bonds keep the protein together"--

The atomic number of zinc is 30.

Generally, the atomic number is simply defined as the number of protons present in an atom. Due to this reason, atomic number is also sometimes known as the proton number. During the calculations, atomic number is usually denoted by the capital letter Z. The symbol Z is derived from the a German word zahl, which means number of numeral, or atomzahl, which is a more modern word which means atomic number.

The atomic number is basically the number of protons present in the nucleus of an atom. The number of protons are used to define the identity of an element (i.e., an element with 6 protons is a carbon atom, no matter how many neutrons may be present in the atom, identity depends upon the number of protons.)

Learn more about atomic number from the link given below.

https://brainly.com/question/16858932

#SPJ4

The rank according to their reactivity toward electrophilic substitution:

A) Benzene > Chlorobenzene > o-dichlorobenzene

B) Phenol Nitrobenzene > p-bromo > nitrobenzene

C) o-xylene > fluorobenzene > benzaldehyde

D) p-methoxybenzonitrile > p-methyl benzonitrile > benzonitrile

A chemical process in which an electrophile replaces a functional group on a molecule (an electron-deficient species). Typically, a hydrogen atom is the one that is replaced.

Two types of electrophilic substitution exist:

Aromatic electrophilic substitution occurs when an electrophile swaps out an atom that is connected to the aromatic ring. In this, an electrophile takes the place of a hydrogen atom that was previously attached to a benzene ring. Examples include the Friedel Craft reaction, aromatic sulphonation, and aromatic nitration.

Alkylation using electrophiles

In an aliphatic electrophilic substitution process, the functional group from the aliphatic molecule is replaced by an electrophile. Examples include diazonium coupling, halogenation of ketones, nitrosation, and keto-enol tautomerism.

The reactivity of aromatic or aliphatic compounds towards electrophilic substitution varies depending on the kind of the electron-withdrawing group linked to the component.

Step 2: Prioritizing electrophilic substitution for chlorobenzene, o-dichlorobenzene, and benzene

One Cl atom is joined to the benzene ring in chlorobenzene. Since Cl is a deactivating or electron-withdrawing group, it increases the likelihood that an electrophile may attack chlorobenzene as opposed to the unsubstituted benzene nucleus, where there is no electron-withdrawing group.

Now, two Cl groups (electron-withdrawing groups) are present in o-dichlorobenzene, which results in a greater reduction in the electron density on the ring than was the case with just one Cl in chlorobenzene. Therefore, the more a group's capacity is attached,

Benzene > Chlorobenzene > o-dichlorobenzene

Step 3: P-bromonitrobenzene, nitrobenzene, and phenol are ranked in order of preference for electrophilic substitution

In phenol, the benzene ring has a hydroxyl group (-OH) bonded to it. This -OH group raises the electron density on the ring (the activating group) due to the mesomeric effect, making it more nucleophilic and susceptible to attack by an electrophile.

In contrast, nitrobenzene has an electron-withdrawing group linked to the nitro group, which lowers the electron density at the benzene nucleus, increasing its electrophilicity and decreasing its susceptibility to attack by an electrophile.

Two deactivating groups are present in p-bromonitrobenzene, which reduces the nucleophilicity of the benzene nucleus more than a single nitro group did in nitrobenzene.

Summarizing all of this, the final ranking is as follows:

P-bromo nitrobenzene, or phenol nitrobenzene

P-bromonitrobenzene has two deactivating groups, reducing the nucleophilicity of the benzene nucleus more than nitrobenzene's single nitro group did.

In conclusion, the following is the final ranking:

Phenol Nitrobenzene > p-bromo > nitrobenzene

Step 4: Prioritizing electrophilic substitution for fluorobenzene, benzaldehyde, and o-xylene

O-xylene contains two methyl groups.

are present at positions 1, 2, and 3. As a result of the +Inductive effect (electron releasing group), methyl groups enhance the electron density at the aromatic ring, making it more nucleophilic and susceptible to assault by an electrophile.

The F, however, reduces the electron density on the benzene nucleus by the -I effect, but the -CHO group reduces via both the -Inductive effect and the mesomeric effect (prominent). Therefore, -CHO reduces the electron density at the benzene nucleus by a significantly greater amount than does F.

Consequently, the following rating will be in order:

O-xylene > Fluorobenzene > Benzaldehyde

Step 5: Prioritizing electrophilic substitution for benzonitrile, p-methylbenzonitrile, and p-methoxybenzonitrile

All of the compounds listed contain the nitrile group, which reduces the electron density on the benzene nucleus through the mesomeric and inductive effects, making the benzene less nucleophilic and more resistant to electrophile assault.

In addition to the nitrile group, p-methyl benzonitrile also contains a methyl group at the para position, which increases the electron density at benzonitrile by +Inductive effect, making it more nucleophilic.

In contrast, p-methoxybenzonitrile also contains a methoxy group at the para position, which increases benzonitrile's electron density by mesomeric effect (more prominent than inductive effect), making it the most susceptible to electro. So, the order as follows:

p-methoxybenzonitrile > p-methyl benzonitrile > benzonitrile

To learn about Electrophilic substitution with the help of given link:

https://brainly.com/question/28286554

#SPJ4

Answer:

Beta β

Explanation:

Beta particles are negatively charged electrons emitted by the nucleus on decay