Answer:
Mass = 1.85 g
Explanation:
Given data:
Number of formula units = 2.8×10²²
Mass of NaOH = ?
Solution:
1 mole contain 6.022×10²³ formula units
2.8×10²² formula units × 1 mol /6.022×10²³ formula units
0.46×10⁻¹ mol
0.046 mol
Mass of NaOH:
Mass = number of moles × molar mass
Mass = 0.046 mol × 40 g/mol
Mass = 1.85 g
Draw the structures of cyclohexane and benzene. Show all hydrogen atoms. Cyclohexane, C6H12 (six C in a ring) Benzene, C6H6 (six C in a ring)
Answer:
See attached picture.
Explanation:
Hello!
In this case, considering that the cyclohexane has six carbon atoms and therefore twelve hydrogen atoms in its structure because it has no double bonds unlike benzene which actually has three and therefore it has six carbon atoms but six hydrogen atoms, on the attached picture, you will see the structure of both hydrocarbons as required, considering that each carbon atom must have four bonds in order to complete the corresponding octets.
Best regards!
Small or even large mountainous areas that have had long droughts or who have had many wildfires are prone to mudslides because many plants are destroyed during those processes. Mudslides are when large amounts of water accumulate rapidly in the soil in mountainous areas. The soil becomes over saturated with water and gravity causes the water-soaked soil to “run down” the mountain in a river like behavior. Without plants and their root systems to hold the soil in place, the soil gets washed away during rail storms. Which natural process causes these mudslides and washes away the soil?
QUICK I WILL CHOOSE BRAILEST
What is convection?
1. Transfer of heat through objects touching source
2. Transfer of heat through direct physical contact
3. Transfer of heat through electromagnetic waves
4. Transfer of heat through the movement of particles
Answer:
C
Explanation:
Answer:
4. Transfer of heat through the movement of particles
Explanation:
because it goes in a circular motion
How much heat energy is required to melt 25.0 g of Aluminum at its melting point, 658°C? (The Hf of Al is 94.4 joules/gram)
Answer:
2360J
Explanation:
Given parameters:
Mass of aluminum = 25g
Melting point = 658°C
Latent heat of melting = 94.4j/g
Unknown:
Amount of heat require for melting = ?
Solution:
The amount of heat required for this melting will be the product of the mass of the aluminum and the latent heat of melting;
H = m L
m is the mass
L is the latent heat of melting
Insert the parameters and solve;
H = 25 x 94.4 = 2360J
What is the molality of a solution prepared by dissolving 150.0 g C6H12O6 in 600.0 g of H2O?
Answer:
50/36 = 25/18
Explanation:
Solution at attachment box
Molality = mole of dissolvable (this question glucose) / kg of water
Answer:
Molality = 1.38 mol/Kg
Explanation:
Given data:
Molality of solution = ?
Mass of C₆H₁₂O₆ = 150.0 g
Mass of water = 600.0 g (600 g ×1 kg/1000 g= 0.6 Kg)
Solution:
Number of moles of C₆H₁₂O₆:
Number of moles = mass/molar mass
Number of moles = 150.0 g/180.16 g/mol
Number of moles = 0.83 mol
Molality:
Molality = moles of solute / kg of solvent
Molality = 0.83 mol /0.6 Kg
Molality = 1.38 mol/Kg
Is N2 a compound or an element
Answer:
Element.
General Formulas and Concepts:
Chemistry
Reading a Periodic TableDiatomic ElementsExplanation:
Diatomic Elements are elements that are bonded to themselves. Naturally, these elements are not found alone in nature.
Diatomic Elements:
Hydrogen
Nitrogen
Oxygen
Fluorine
Chlorine
Bromine
Iodine
Since Nitrogen is a diatomic element, we would find Nitrogen in nature as N₂.
Enter the balanced net ionic equation for the potentially unbalanced equation NH4Cl(aq)+NaOH(aq)→H2O(l)+NH3(g)+NaCl(aq).
Answer:
NH₄⁺ (aq) + OH⁻ (aq) → H₂O (l) + NH₃ (g)
General Formulas and Concepts:
Chemistry - Solutions
Solubility RulesReaction PredictionCompound statesExplanation:
Step 1: RxN
NH₄Cl (aq) + NaOH (aq) → H₂O (l) + NH₃ (g) + NaCl (aq)
Step 2: Balance RxN
NH₄Cl (aq) + NaOH (aq) → H₂O (l) + NH₃ (g) + NaCl (aq)
1 N on each side5 H on each side1 Cl on each side1 Na on each side1 O on each sideAlready balancedStep 3: Ionic Equations
Total Ionic Equation
Break up aqueous solutions.
NH₄⁺ (aq) + Cl⁻ (aq) + Na⁺ (aq) + OH⁻ (aq) → H₂O (l) + NH₃ (g) + Na⁺ (aq) + Cl⁻ (aq)
Net Ionic Equation
Cancel out spectator ions.
NH₄⁺ (aq) + OH⁻ (aq) → H₂O (l) + NH₃ (g)
Circle the word that correctly completes each sentence as it relates to a battery (voltaic cell). a. The positive electrode is the (cathode anode b. The cathode / anode) is the site of the oxidation half-reaction. c. Electrons flow out of the cathode / anode) and into the (cathode 1 anode). d. The metal piece that is used for the cathode anode) is the reducing agent. g
Answer:
a) anode
b) anode
c) cathode
d) anode
2. Click on the bucket to raise the temperature of the container to approximately 400 K (127°C). What happened to the pressure?
Answer:
Increased, 7.5-8.3
Decreases, 3.5-4.3
Gay Lussacs law
Explanation:
There are so many laws for ideal gas at constant temperature , at constant pressure, the law at constant volume is called Gay-Lussac's law. Therefore, on increasing temperature to approximately 400 K (127°C), the pressure will also increase.
What is Gay-Lussac's law?According to this law, pressure is directly proportional to temperature. This gas law is valid only to ideal gas not on the vanderwaal gas. Since it is mentioned in the question that volume is constant we can apply Gay-Lussac's law over here.
Mathematically
P₁T₂=P₂T₁
Since according to this law, pressure is directly proportional to temperature, so on increasing temperature to approximately 400 K (127°C), the pressure will also increase.
Therefore, on increasing temperature to approximately 400 K (127°C), the pressure will also increase.
To know more about Gay-Lussac's law, here:
https://brainly.com/question/11387781
#SPJ2
Which are characteristics of metals that result from their bonding? Check all that apply.
ANSWER: Conduct Electricity and Are Malleable, 2 and 4
Answer:
Conduct Electricity and Are malleable
Explanation:
Answer:
conduct electricity
are malleable
Explanation:
Metals conduct electricity because they have “free electrons.” Unlike most other forms of matter, metallic bonding is unique because the electrons are not bound to a particular atom. This allows the delocalized electrons to flow in response to a potential difference.
And since metals don't tightly hold on to electrons during metallic bonding, they are easily replaced. In metallic bonding, electrons are delocalized and move freely among nuclei. When a force is exerted n the metal, the nuclei shift, but the bonds do not break, giving metals their characteristic malleability.
The survival of aquatic organisms depends on the small
amount of O2 that dissolves in H2O. The diagrams above
represent possible models to explain this phenomenon. Which
diagram provides the better particle representation for the
solubility of O2 in H20, and why?
Answer:
Explanation:
Diagram 2! Because the polar H2O molecules can induce temporary dipoles on the electron clouds of 02 molecules.
alison measured the temperature of benzene as 26.1K if the correct value is 24.9K what is the percent error
Answer:
Percent error = 4.8%
Explanation:
Given data:
Measured value = 26.1 K
Actual value = 24.9 K
percent error = ?
Solution:
Formula:
Percent error = [ measured value - actual value/ actual value] × 100
Percent error = [26.1 K - 24.9 K/24.9 K] × 100
Percent error = [ 1.2K /24.9K]× 100
Percent error = 0.048 × 100
Percent error = 4.8%
definition of instantaneous speed
Answer:
Explanation:
The instantaneous speed is the speed of an object at a particular moment in time. And if you include the direction with that speed, you get the instantaneous velocity.
How does the reactivity down group 1 and 7 differ and how is this related to the
atomic radius of these elements?
Answer:
Explanation:
Group 1 elements have a single electron (called the valence electron) in there outermost shell. Reactivity of group 1 elements (alkali metals) increases down a group; this is because as one moves down the group, the atomic radius increases thus causing the outermost electron/valence electron to be found further away from the nucleus, which makes it (the electron) to be easily lost due to weaker force of attraction between the single valence electron and the central nucleus.
However, in the case of group 7/halogen elements, as one moves down the group, the atomic radius also increases, but the reactivity reduces. This is because as one moves down the group and the atomic radius increases, the nucleus ability to attract an electron lowers, because of the increased number of electrons that shields against the pull of the nucleus (this is referred to as nuclear shielding). This is the reason fluorine is the most reactive halogen.
A balloon contains 3300 mL of helium gas at 63 °C. What is the final volume, in milliliters, of the gas when the temperature changes to each of the following, if pressure and amount of gas do not change? Part A 78 C Express your answer to two significant figures and include the appropriate units. UA Vi= Value Units
The final volume : 3.4 L
Further explanationCharles's Law
When the gas pressure is kept constant, the gas volume is proportional to the temperature
[tex]\tt \dfrac{V_1}{T_1}=\dfrac{V_2}{T_2}[/tex]
V₁=3300 ml
T₁=63 + 273=336 K
T₂=78+273=351 K
the final volume :
[tex]\tt V_2=\dfrac{V_1.T_2}{T_1}\\\\V_2=\dfrac{3300\times 351}{336}\\\\V_2=3447.3~ml\rightarrow 2~sig.~fig.\rightarrow 3.4~L[/tex]
2. Write a statement that relates chain length and boiling point.
3. Write a statement that relates polarity and solubility in water
4. Write a statement that relates polarity and solubility in oil
Answer:
Higher chain length, higher boiling point
Polar species are soluble in similar polarity water, Non polar species are soluble in similar non polar oil.
Explanation:
Chain length refers to the number of carbons. As it increases, boiling points of alkanes increase for these compounds. Reason behind is that longer chain molecules become more entangled along with each other.
Polarity bonds atoms together, by chemical bonding - through sharing seperated electric charge ie electrons. Polar Solvents have large dipole moments, contain bonds between atoms with different electro negativities. Non Polar solvents contain bonds between atoms with similar electro negativities.
Polar species are soluble in water, as it is from same category. Non Polar species are soluble in oil, as it is from same category. Substances with same polarity are soluble in each other, substances with different polarities are different from each other. If you have 45.0g of mercury Il perchlorate, how many moles do you have?
Answer:
Approx. 0.1126 mol
How many molecules of oxygen are in 3.0 moles of oxygen?
Answer:
There are 18 moles of oxygen in 3.0 mole of glucose...
Explanation:
Does it help???
Answer:
18.066× 10²³ molecules
Explanation:
Given data:
Number of moles of oxygen = 3.0 mol
Number of molecules = ?
Solution:
The given problem will solve by using Avogadro number.
It is the number of atoms , ions and molecules in one gram atom of element, one gram molecules of compound and one gram ions of a substance. The number 6.022 × 10²³ is called Avogadro number.
1 mole = 6.022 × 10²³ molecules
3 mol × 6.022 × 10²³ molecules / 1 mol
18.066× 10²³ molecules
Pls answer quickkk :)))
Answer:
c turns back when iodine is added result indicated a chemical reaction
ancient hunters used obsidian rock to make spears. given this information, what can you conclude about the minerals in obsidian rock? explain your reasoning.
it must have been light, so it can be more mobile, and strong to penetrate skin and flesh, and easy to carve so they can put it on a spear.
your welcome and a brainliest would be nice if you can
Which of the following is the correct Lewis dot diagram for Br found in LiBr.
A. [Br]*
B. [Br]
C. (Br:11
D. [Br:1
Ο Α
B
Ос
If all of the electron groups around a single central atom are bonding, and the same outer atom is bonded to the central atom in each case, is the molecule polar, nonpolar, or does it depend on the identity of the outer atom?
Answer:
It depends on the identity of the outer atom
Explanation:
We must recall that the polarity of a molecule depends on difference In electronegativity between atoms as well as the shape of the molecule.
When a central atom has no lone pairs and all the groups in the molecule are bonding, the identity and arrangement of the outer atoms will determine the polarity of the molecule.
A polar molecule is formed by certain types of outer atoms arranged in certain ways around the periodic table and vice versa.
The identification of the outer atom determines whether the molecule is polar or non-polar. The CH4 compound, for illustration, is a non-polar compound.
There really is no dipole present here because the net dipole moments cancel one another out. As a result, the dipole moment is negligible.
The molecule CH3Cl, for instance, is a polar molecule. There is indeed a dipole force here, and the net polarization isn't zero.
As a result, it exhibits a dipole moment. As a result, the identification of the exterior atom determines whether the molecule is polar or non-polar.
Learn more:
https://brainly.com/question/15988737?referrer=searchResults
The combustion of ethane (C2H6) produces carbon dioxide and steam.
2C,H, (g) + 702(g) — 4CO2(g) + 6H2O(g)
How many moles of Co, are produced when 5.55 mol of ethane is burned in an excess of oxygen?
moles of CO2:
Answer:
Number of moles of CO₂ produced = 11.1 mol
Explanation:
Given data:
Mass of ethane = 5.55 mol
Number of moles of CO₂ produced = ?
Solution:
Chemical equation:
2C₂H₆ + 7O₂ → 4CO₂ + 6H₂O
Now we will compare the moles of ethane and carbondioxide.
C₂H₆ : CO₂
2 : 4
5.55 : 4/2×5.55 = 11.1 moles
Number of moles of CO₂ produced = 11.1 mol
A 7.12 L cylinder contains 1.21 mol of gas A and 4.94 mol of gas B, at a temperature of 28.1 °C. Calculate the partial pressure of each gas in the cylinder. Assume ideal gas behavior.
Answer:
[tex]P_A=4.20atm\\\\P_B=17.1atm[/tex]
Explanation:
Hello!
In this case, since the equation for the ideal gas is:
[tex]PV=nRT[/tex]
For each gas, given the total volume, temperature (28.1+273.15=301.25K) and moles, we can easily compute the partial pressure as shown below:
[tex]P_A=\frac{n_ART}{V} =\frac{1.21mol*0.082\frac{atm*L}{mol*K}*301.25K}{7.12L} \\\\P_A=4.20atm\\\\P_B=\frac{n_BRT}{V} =\frac{4.94mol*0.082\frac{atm*L}{mol*K}*301.25K}{7.12L} \\\\P_B=17.1atm[/tex]
Best regards!
A model of an atom which contains 24 electrons, 25 protons and 26 neutrons has some of its particles inside a nucleus at the centre of the model. What is the nucleon number (mass number) of the atom?
Answer:
The nucleon number of given atom = 51
Explanation:
An atom consist of electron, protons and neutrons. Protons and neutrons are present with in nucleus while the electrons are present out side the nucleus.
All these three subatomic particles construct an atom. A neutral atom have equal number of proton and electron. In other words we can say that negative and positive charges are equal in magnitude and cancel the each other. For example if neutral atom has 6 protons than it must have 6 electrons. The sum of neutrons and protons is the mass number of an atom while the number of protons are number of electrons is the atomic number of an atom.
The mass number is also called nucleon number.
The nucleon number of given atom = number of protons + number of neutrons
The nucleon number of given atom = 25 + 26
The nucleon number of given atom = 51
It is cold and wet outside. Pam is wearing a wool hat and fur lined boots to help keep her warm. These pieces of clothing are good__.
Question 18 options:
A. conductors
B. heaters
C. insulators
D. thermometers
Answer:
c insulators
Explanation:
Answer:
C: Insulators
Explanation:
Hope This Helps :)
Which of the following properties of a photon are required to calculate the energy emitted by an electron returning to its ground state?
A. wavelength
B. frequency
C. either A or B
D. both A and B
Answer:
C. either A or B
Explanation:
To calculate the energy of a photon returning to its ground state, we required either the frequency or the wavelength. Often times, not both.
The wavelength of a photon can be derived by;
E = hf
or
E = [tex]\frac{hc}{wavelength}[/tex]
h is the Planck's constant
c is the speed of light
f is the frequency
Which contribution added to rutherfords discovery of a positive nucleus atoms are invisible electrons are scattered in an atom neutrons are inside the nucleus of An atom atoms of the same element have the same properties
Answer:
neutrons are inside the nucleus
Explanation:
The most significant contribution that added to Rutherford's discovery of a positive nucleus is that neutrons are also inside the nucleus.
The discovery of neutrons as a nuclear particle was instrumental to Rutherford's discovery. Since during his experiment, the alpha particles were deflected partly, he suggested a massive nucleus made up of just protons. With the discovery of the neutron, the mass of the nucleus was enough to cause the deflection.How much ice could be melted at 0°C if 5200 joules of heat were added?
Answer:
0.02kg
Explanation:
Given parameters:
Amount of heat = 5200J
Unknown:
Mass of ice that would be melted at 0°C = ?
Solution:
To solve this problem, use the expression below;
H = mL
H is the heat
m is the mass
L is the latent heat of fusion of ice = 3.33 x 10⁵ J/kg.
Insert the parameters and solve for m;
5200 = m x 3.3 x 10⁵
m = [tex]\frac{5200}{3.33 x 10^{5} }[/tex] = 0.02kg
Joan has four containers. The chart below shows the mass and volume of each of the containers. Two of the containers are filled with solids, one is filled with a liquid, and one is filled with a gas.
Answer:
This question is incomplete
Explanation:
This question is incomplete. However, it should be noted that if the containers are compared with an equal average volume, the containers having solids will have larger masses than that containing liquid which will also have a larger mass than that containing gas. This is because solids have there molecules touching each other in compact manner which makes the molecule exert a certain combined force/mass. The molecules of liquid are also close to one another but are not compact like the solids and are hence exerting a lesser force/mass than solids. Gases have free molecules that are far apart and thus are usually the lightest when they occupy the same volume as liquids and solids.