The final temperature, in degrees Celsius, of the gas is 34.62 °C
Gas lawsFrom the question, we are to determine the final temperature, in degrees Celsius
From the Pressure law or Gay-Lussac's law
We have that, for a given mass and constant volume of an ideal gas, the pressure exerted on the sides of its container is directly proportional to its absolute temperature.
Using the formula,
[tex]\frac{P_{1} }{T_{1}} = \frac{P_{2} }{T_{2}}[/tex]
Where P₁ is the initial pressure
T₁ is the initial temperature
P₂ is the final pressure
and T₂ is the final temperature
From the given information,
P₁ = 739 mmHg
T₁ = 23 °C = 23 + 273.15 = 296.15 K
P₂ = 768 mmHg
T₂ = ?
Putting the parameters into the formula, we get
[tex]\frac{739}{296.15}=\frac{768}{T_{2} }[/tex]
Then,
[tex]T_{2} = \frac{768 \times 296.15}{739}[/tex]
T₂ = 307.77 K
Therefore,
T₂ = 307.77 - 273.15 = 34.62 °C
Hence, the final temperature, in degrees Celsius, of the gas is 34.62 °C
Learn more on Gas laws here: https://brainly.com/question/16478170
Here is the complete question:
A gas sample has a pressure of 739 mmHg when the temperature is 23 °C. What is the final temperature, in degrees Celsius, when the pressure is 768 mmHg, with no change in the volume or amount of gas?
weaving nearly died out because factories can make fabrics faster than people who create them by hand. question 2 options:
true OR false
Answer:
True
Explanation:
A hand weavers would take much more time in their craft than large factories did, their industry began to decline and be replaced by industrial machines.
plzzzz ...... Why is the result of CO2 bonds zero?
Answer:
this is right because carbon and oxygen complete its octet
what would the formula be if the products RbCI decomposed
A decomposition reaction occurs when one reactant breaks down into two or more products. It can be represented by the general equation: AB → A + B. In this equation, AB represents the reactant that begins the reaction, and A and B represent the products of the reaction.
RbCI = rubidium chloride
Can some one please help
Answer:
Chadwick-he discovered the neutron. He discovered this by demonstrating a neutral particle with a mass the same as a proton through a reaction between gramma Ray's and a wax sample.
Rutherford-he discovered the concept of radioactive half-life, the radioactive element radon, and named alpha and beta radiation.
j.j.Thompson discovered that atoms where made up of smaller components. This had major effects for the field of physics.
:)
Please help me................I beg you.........
Answer:
the problem is that Gary is not the smartest snail.the hypothesis is that he thinks he can get smarter by eating super snail food everyday.
hope this helps
A(n) ____________ acts to maintain a relatively stable concentration of hydrogen ions in a solution.
Answer:
buffer
Explanation:
The bond line formula,
represents the molecular formula
B
A
C8H18
C8H15
Answer:
C8H18
Explanation:
-
use the following equation for the combustion of methane gas.
ch4(8) + 202(g) → co2(g) + 2h2o(1)
in a certain reaction at stp, 29.2 l of methane is combusted
with 63.3 l of oxygen.
what volume of excess reactant remains after the reaction is
complete?
lo2
Considering the definition of STP conditions and reaction stoichiometry, the volume of excess reactant that remains after the reaction is complete is 4.928 L.
Definition of STP conditionThe STP conditions refer to the standard temperature and pressure. Pressure values at 1 atmosphere and temperature at 0 ° C are used and are reference values for gases. And in these conditions 1 mole of any gas occupies an approximate volume of 22.4 liters.
Reaction stoichiometryIn first place, the balanced reaction is:
CH₄ + 2 O₂ → CO₂ + 2 H₂O
By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:
CH₄: 1 mole O₂: 2 moles CO₂: 1 mole H₂O: 2 molesVolume of excess reactantYou know that in a certain reaction at STP, 29.2 L of methane CH₄ is combusted with 63.3 L of oxygen O₂.
Considering the definition of STP, you can apply the following rules of three:
if by definition of STP conditions 22.4 liters are occupied by 1 mole of methane, 29.2 L are occupied by how many moles of methane?[tex]amount of moles of methane=\frac{29.2 Lx1 mole}{22.4 L}[/tex]
amount of moles of methane= 1.30 moles
if by definition of STP conditions 22.4 liters are occupied by 1 mole of oxygen, 63.3 L are occupied by how many moles of oxygen?[tex]amount of moles of oxygen=\frac{63.3 Lx1 mole}{22.4 L}[/tex]
amount of moles of oxygen= 2.82 moles
Now you can apply the following rule of three to determine the excess reagent: if by stoichiometry 2 moles of O₂ reacts with 1 mole of CH₄, if 2.82 moles of O₂ react, how much moles of CH₄ will be needed?
[tex]moles of CH_{4} =\frac{2.82 moles of O_{2}x 1 moles of CH_{4}}{2 moles of O_{2}}[/tex]
moles of CH₄= 1.41 moles
But 1.41 moles of CH₄ are not available, 1.30 moles are available. Since you have less moles than you need to react with 2.82 moles of O₂, methane CH₄ will be the limiting reagent. And oxygen O₂ is excess reagent.
Now you can apply the following rule of three to the amount of O₂ that reacts when the limiting reactant reacts completely: if by stoichiometry 1 mole of CH₄ reacts with 2 moles of O₂, if 1.30 mole of CH₄ react, how much moles of O₂ will be needed?
[tex]moles of O_{2} =\frac{2 moles of O_{2}x 1.30 moles of CH_{4}}{1 moles of CH_{4}}[/tex]
moles of CH₄= 2.60 moles
So, after the reaction is complete, the moles of excess reactant that remains are calculated as:
2.82 moles - 2.60 moles= 0.22 moles
Finally, considering the definition of STP, you can apply the following rule of three: if by definition of STP conditions 1 mole of O₂ occupies a volume of 22.4 liters, 0.22 moles occupies how much volume?
[tex]volume=\frac{0.22 molesx22.4 L}{1 mole}[/tex]
volume= 4.928 L
In summary, the volume of excess reactant that remains after the reaction is complete is 4.928 L.
Learn more about
STP conditions:
https://brainly.com/question/26364483
brainly.com/question/8846039
brainly.com/question/1186356
Please help brainiest is award.
Answer:
2 i think if not than its 4
Explanation:
Answer:
3 if its not than 4
Explanation:
How do you use Reference Point in Science
Explanation:
A reference point is a place or object used for comparison to determine if something is in motion. An object is in motion if it changes position relative to a reference point. Objects that are fixed relative to Earth – such as a building, a tree, or a sign - make good reference points.
2. What element is steel mainly
composed of?
A Iron
B. Carbon
C. Manganese
D. Silver
Answer:
Carbon
Explanation:
Steel is an alloy of iron and carbon. Stainless steels are steels containing at least 10.5% chromium, less than 1.2% carbon and other alloying elements
Answer: B
Explanation:Steel is an alloy of iron and carbon.
Can somebody list only 2 ways whales are different from fish?
(Make it only like 1 sentence)
(WILL MARK BRAINLIEST)
:D
Answer:
1. whales are mammals and fish are not
2. Fish have gills which extract oxygen from the water and thus allow it to live underwater its entire life. Whales on the other hand do not have gills but instead have one or two blowholes
3. whales provide milk to their young and fish do not!
Explanation:
i would Luke to ??
Answer:
1 answer
Explanation:
The diagram shows two molecules (A and B) with different
rates of travel on silica gel plate. Which method of separation
would be most effective to separate a mixture of A and B?
Answer: chromatography
Explanation:
Distinguish between electron affinity and electronegativity
The main difference between electronegativity and electron affinity is that electronegativity is the ability of an atom to attract electrons from outside as far as electron affinity is the amount of energy an atom receives when an electron. Electron negativity is applied to a single atom.
Complete combustion of a 0.600-g sample of a compound in a bomb calorimeter releases 24.0 kj of heat. the bomb calorimeter has a mass of 1.30 kg and a specific heat of 3.41 j/(gi°c). if the initial temperature of the calorimeter is 25.5°c, what is its final temperature? use q equals m c subscript p delta t.. 30.9°c 34.5°c 44.0°c 51.5°c
The final temperature of the bomb calorimeter is 30.9°C.
What is combustion reaction?Combustion reactions are those reactions in which a compound completly decompose in to carbon dioxide and water molecule.
The final temperature will be calculated by using the equation:
Q = mc(T₂ – T₁), where
Q = relesed heat from calorimeter = 24kJ = 24000J
m = mass of calorimeter = 1.30kg = 1300g
c = specific heat of calorimeter = 3.41 J/(g°C)
T₁ = initial temperature of calorimeter = 25.5°C
T₂ = final temperature of calorimeter = to find?
On putting all these values on the above equation and calculate for T₂, we get
T₂ = 24000/(1300)(3.41) + 25.5
T₂ = 30.9°C
Hence, correct option is (1) i.e. 30.9°C.
To know more about released energy, visit the below link:
https://brainly.com/question/2279475
Answer:
30.9
Explanation:
right on edge 2022
how many carbon monoxide molecules are in .75 moles of carbon dioxide? just need answer
Answer:
A standard scientific unit for measuring large quantities of very small entities such as atoms, molecules, or other specified particles.
All the data is given in the question and these are as follows:-
Moles - 0.75
Na - 6.022*10^{23
The formula we are using to find the molecules is as follows:-
n = \frac{molecule}{Na}n=
Na
molecule
After, putting the value and solving it. we will get
0.75 * 6.022*10^2^3 = 4.5165*10^{23
When the following equation is balanced:
Al + NiSO4 ® Al2(SO4)3 + Ni
the correct set of coefficients would be:
Answer:
2Al + 3NiSO4 -> Al2(SO4)3 + 3Ni
Explanation:
You just had to balance the equation by looking at Al2(SO4)3. It helps to pick the right coefficients for other components.
The correct set of coefficients for the balanced equation is: 2, 3, 1, 3.
When balancing the equation: 2Al + 3NiSO₄ → Al₂(SO₄)₃ + 3Ni .The coefficients indicate the number of each compound or element required for the equation to be balanced. In this case, the equation is balanced by ensuring that the number of atoms of each element is the same on both sides of the equation.
By placing the coefficients 2 and 3 in front of Al and NiSO₄, respectively, it ensures that there are an equal number of aluminum and nickel atoms on both sides. Additionally, the coefficient 3 in front of Ni and Al₂(SO₄)₃ ensures an equal number of nickel and sulfate groups.
Balancing equations is important because it follows the principle of conservation of mass, ensuring that no atoms are gained or lost during a chemical reaction. The set of coefficients chosen allows for the equation to meet this principle and maintain a balanced representation of the chemical reaction.
Learn more about balanced reaction, here:
https://brainly.com/question/14258973
#SPJ6
how many millimoles of solid naoh must be added to 50.0 milliliters of 0.20 molar hocl to obtain a buffewr solution that has a ph of 7.49
The amount of millimoles of solid naoh that must be added to 50.0 milliliters is: 5.0 mmol of NaOH.
Millimoles of solid naohThe [H+] at pH 7.49 is:
[H+] = 10–^7.49
[H+]= 3.24×10–^8 M
And when the solution is half-neutralized pH will be:
pH = pKa while [OCl– ]÷[HOCl] = 1
Now let find the millimoles of solid naoh:
0.20 mol HOCl÷1 L× 50.0 mL
= 10.0 mmol HOCl
Half of 10.0 mmol HOCl will be added
Millimoles of solid naoh=10.0 mmol HOCl÷2
Millimoles of solid naoh= 5.0 mmol of NaOH
Inconclusion the amount of millimoles of solid naoh that must be added to 50.0 milliliters is: 5.0 mmol of NaOH.
Learn more about Millimoles of solid naoh here:https://brainly.com/question/15299296
How does temperature, pressure, and density impact the core of the Earth?
Answer:
temperatures within the outer core range from 7,200 to 9,000 F. Pressure also increases in the outer core due in part to the weight of the crust and mantle above.The Earth's magnetic field is generated by the outer core.
Explanation:
What is the chemical equations for: Steam to
hydrogen using buring magnesium.
[tex]\huge\bold\red{Answer:-}[/tex]
It’s the same as when magnesium reacts with liquid water, only faster:
Mg + 2H₂O → MgO + H₂.
The difference is that in water, the reaction has a second step, converting MgO to Mg(OH)₂.
HOPE IT HELPS♥PLEASE HELP ME!!
Write formulas for the following compounds:
a. lithium fluoride, lithium chloride, lithium bromide, lithium iodide, lithium oxide, lithium sulfide
b. sodium fluoride, sodium chloride, sodium bromide, sodium iodide, sodium oxide, sodium sulfide
c. potassium fluoride, potassium chloride, potassium bromide, potassium iodide, potassium oxide, potassium sulfide
d. ammonium fluoride, ammonium chloride, ammonium bromide, ammonium iodide, ammonium sulfide
Answer:
a).lithium fluoride => LiF
lithium chloride =>LiCl
lithium bromide => LiBr
lithium iodide => Lil
lithium oxide =>Li₂O
lithium sulfide => Li₂
b).sodium fluoride => NaF
sodium chloride => NaCl
sodium bromide => NaBr
sodium iodide => Nal
sodium oxide => Na₂O
sodium sulfide => Na₂S
c).potassium fluoride => KF
potassium chloride => KCl
potassium bromide => KBr
potassium iodide => KI
potassium oxide => K₂O
potassium sulfide => K₂S
d).ammonium fluoride =>NH₄F
ammonium chloride => NH₄Cl
ammonium bromide => NH₄Br
ammonium iodide => NH₄I
ammonium sulfide => (NH₄)₂S
How much heat is absorbed when a 10.0-g sample of water is changed from 23.0⁰C to 32.0⁰C?
Answer:
376.56J
Explanation:
The amount or quantity of heat absorbed can be calculated using the formula:
Q = m × c × ∆T
Where; Q = amount of heat absorbed (J)
m = mass of water (g)
c = specific heat capacity of water (J/g°C)
∆T = change in temperature (°C)
According to the provided information in this question; m = 10.0g, c = 4.184J/g°C, final temperature = 32°C, initial temperature = 23°C
Q = m × c × ∆T
Q = 10 × 4.184 × (32 - 23)
Q = 41.84 × 9
Q = 376.56J
A reversible process is one that ________
[A] must be carried out at high temperature
[B] must be carried out at low temperature
[C] happens spontaneously
[D] can be reversed with no net change in either system or surroundings
[E] is spontaneous in both directions
Answer:
[D]can be reversed with no net change in either system or surroundings
A reversible process is one that can be reversed with no net change in either system or surroundings. Therefore, option (D) is correct.
What are reversible reactions?A thermodynamic process can be reversible if the process can be turned back to both the system and the surroundings to return to their original states, with no other change in the universe.
No such processes as reversible processes can exist and these processes can easily be defined as idealizations or models of real processes.
A few examples of Reversible Processes: are the extension of springs, slow adiabatic compression or expansion of gases, electrolysis, the frictionless motion of solid, slow isothermal compression or expansion of gases
An irreversible process is a process in which the system and the surroundings do not return to their actual condition once the process is initiated. Examples of irreversible processes are Heat transfer, Diffusion, and electricity flow through a resistance.
Learn more about the reversible process, here:
https://brainly.com/question/22937109
#SPJ2
Identify the products of the complete combustion of methane. ............................................................... and ...............................................................
carbon(iv) oxide and water.
A car with a mass of 700 kg is moving with a speed of 20m/s.
Calculate the kinetic energy of the car.
Answer:
The answer is 140,000 JExplanation:
The kinetic energy of an object can be found by using the formula
[tex]KE = \frac{1}{2} m {v}^{2} \\ [/tex]
where
m is the mass
v is the velocity
From the question we have
[tex]KE = \frac{1}{2} \times 700 \times {20}^{2} \\ = 350 \times 400[/tex]
We have the final answer as
140,000 JHope this helps you
What’s the type of reaction and word equation for: C2H6O+2O2= 2CO2 + 3H2O
Answer:
Ethenol + Oxygen = water + Carbon Dioxide C2H5OH + 3O2 = 2CO2 + 3H2O
Explanation:
Which energy is required when we convert an atom into an ion?
Select one:
O a. ionization energy
O b. electron affinity
O c. binding energy
O d. electronegativity
Answer:
ionization energy is the answer
Chemistry is the branch of science which make physis and biology clear true or false
Answer:
yes it is branch science make physics and biology in physics make therom and biology make defination
Any 1 might help the 1 below but if it's not there, just comment
Your Q is not visible .Plz provide it
2. D, because transition metals have a high density.
3. B, because the properties of elements depend on the valence electrons.
4. C, because the atom emits a negatively charged electron, the atom becomes positively charged.
5. D, because hydrogen and helium are both lighter than air, but hydrogen is very reactive, that's why helium is used.
6. A, because it creates caustic soda.
7. C, because only fluorine and argon are gases, but argon is not two-molecular.
8. C, because iodine is either solid or gaseous. Solid iodine is gray and gaseous iodine is purple.
9. C, because all elements of the first main group have an odd number of protons and react violently with water.
10. D, because oxygen is air. Nitrogen is very reactive and helium is lighter than air.
11. A, because carbon has atomic number 6 and magnesium has atomic number 12.
12. B, because table salt is sodium chloride.
13. B, because sodium ions and neon have the same electron configuration.
14. C, because chloride ions and argon have the same electron configuration.
15. C, because calcium ions and argon have the same electron configuration.
16. D
17. C, because silicon has 4 valence electrons and a total of 14 electrons.
18. A
19. B, because it's sodium.
20. Number of protons and electron shells
21. first main group
22. seventh main group
23. cesium
24. fluorine
25. alkali metals
26. alkaline earth metals
27. halogens
28. from metal to nonmetal
29. valence electrons
30. electron shells
31. main group and subgroup
32. semi-metal
33. 18 groups and 7 periods
34. groups
35. periods