what is the factored form of 5(8 + 3x) + 5? ​

Answers

Answer 1
Answer:

15(3+x)

Explanation:

5(8+3x+1)

5(9+3x)

5•3(3+x)

15(3+x)

Related Questions

a sample size 50 will be drawn from a population with mean 73 and standard deviation 8. find the 19th percentile of x bar

Answers

The 19th percentile of x bar is 71.724.

Since the sample size is greater than 30 and the population standard deviation is known, we can use the normal distribution to find the 19th percentile of x bar.

First, we need to find the standard error of the mean (SEM):

SEM = σ/√n = 8/√50 = 1.1314

Next, we need to find the z-score associated with the 19th percentile. We can use a standard normal distribution table or a calculator to find this value, which is approximately -0.877.

Finally, we can use the formula for a confidence interval to find the value of x bar associated with the 19th percentile:

x bar = μ + z*SEM = 73 + (-0.877)*1.1314 = 71.724

Therefore, the 19th percentile of x bar is approximately 71.724.

Know more about percentile here:

https://brainly.com/question/28839672

#SPJ11

Simplify the following trigonometric expression. sin(z)+cos(-z)+sin(-z) 1. sin z 2. cos z 3. 2sin z- cosz 4. 2sin z

Answers

The simplified trigonometric expression is cos(z). We did not get any of the answer choices provided, as they were all incorrect.

Use the trigonometric identities for sine and cosine of negative angles.

Recall that sin(-x) = -sin(x) and cos(-x) = cos(x).

Using these identities, we can simplify the given expression:
sin(z) + cos(-z) + sin(-z)
= sin(z) + cos(z) + (-sin(z))
= sin(z) - sin(z) + cos(z)
= cos(z)

Therefore, the simplified trigonometric expression is cos(z). We did not get any of the answer choices provided, as they were all incorrect.

Know more about trigonometric expression here:

https://brainly.com/question/29059853

#SPJ11

Write an argumentative essay in which you state and defend a claim about whether it is ethical to target uninformed consumers. (MUST BE 150 WORDS)

Answers

An argumentative essay is a piece of writing where the writer takes a position on a debatable topic and presents it with evidence. In this essay, we are discussing whether it is ethical to target uninformed consumers or not. Ethics involves a set of principles and values that regulate human conduct. The purpose of ethical behavior is to ensure that people act in a morally responsible way and do not harm others in any way.

Claim:

It is not ethical to target uninformed consumers.

Supporting Points:

Uninformed consumers are vulnerable to manipulation and exploitation by advertisers.

Targeting uninformed consumers can lead to health and safety issues.

The use of unethical advertising practices can damage the credibility and reputation of businesses.

Explanation:

Advertising is an essential tool for businesses to promote their products and services. However, targeting uninformed consumers with false and misleading advertising is not ethical. Consumers who lack knowledge about a particular product or service are more likely to be misled by advertisers. This can lead to financial loss, health problems, or safety issues.

For example, advertisements for weight-loss supplements can be misleading and harmful. Many of these supplements claim to be "miracle pills" that can help you lose weight quickly. However, most of these claims are false, and the supplements can have harmful side effects.

Therefore, it is the responsibility of businesses to provide accurate and truthful information about their products and services to consumers. Targeting uninformed consumers with false and misleading advertising practices can damage the credibility and reputation of businesses. This can lead to a loss of customers and revenue.

In conclusion, businesses have a responsibility to ensure that their advertising practices are ethical and do not harm consumers. Targeting uninformed consumers with false and misleading advertising practices is not ethical and should be avoided.

To know more about debatable,visit:

https://brainly.com/question/3720888

#SPJ11

If they exist, find two numbers whose sum is 100 and whose product is a minimum. If such two numbers do not exist, explain why.
Second Derivative Test:
If f is a function defined on an interval I and f is twice differentiable function, then for critical value x
=
c
,
If f

(
c
)
=
0
and
f
′′
(
c
)
<
0
, then f
(
c
)
gives maximum value of f.
If f

(
c
)
=
0
and
f
′′
(
c
)
>
0
, then f
(
c
)
gives minimum value of f.

Answers

The two numbers whose sum is 100 and whose product is a minimum are: x= 50 and y= 50.

To find two numbers whose sum is 100 and whose product is a minimum, we can use the Second Derivative Test. Let's start by defining the two numbers as x and y. We know that:

x + y = 100

We want to find the minimum value of xy. So, let's define a function f(x) = xy. We can rewrite this function in terms of one variable:

f(x) = x(100 - x) = 100x - x^2

Now, let's find the critical point of this function by taking the derivative:

f'(x) = 100 - 2x

Setting f'(x) = 0 to find the critical point:

100 - 2x = 0
x = 50

So, the critical point is x = 50. To determine whether this is a minimum or maximum, we need to find the second derivative:

f''(x) = -2

Since f''(50) < 0, we know that the critical point x = 50 is a maximum. Therefore, to find the minimum value of f(x), we need to evaluate f at the endpoints of the interval [0, 100]:

f(0) = 0
f(100) = 0

Since f(x) is decreasing from x = 0 to x = 50, and increasing from x = 50 to x = 100, the minimum value of f(x) occurs at x = 50. Therefore, the two numbers whose sum is 100 and whose product is a minimum are:

x = 50
y = 100 - x = 50

So, the two numbers are 50 and 50.

To know more about Second Derivative Test, refer to the link below:

https://brainly.com/question/30404403#

#SPJ11

Navid paid $469.44 for a new carpet for his bedroom. The dimensions of his bedroom floor are shown below.

Answers

Navid paid $469.44 for a new carpet for his bedroom. The dimensions of his bedroom floor are shown below. We need to find the area of his bedroom floor to know how much carpet Navid needs. Navid bought a carpet for 120 square feet, but his bedroom floor is 120 square feet, so he used all the carpet he bought. Therefore, Navid doesn't have any carpet left.

Let's see how we can calculate the area.

Area of rectangle = length × width

Here, the Length of the bedroom floor = 12 ft

width of the bedroom floor = 10 ft

Area of the bedroom floor = 12 ft × 10 ft = 120 ft²

Now we know that the bedroom floor is 120 square feet.

Therefore, Navid will need 120 square feet of carpet to cover his bedroom floor.

However, we need to know how much carpet Navid left after installing the carpet. If he bought a carpet that is sold by the square yard, we can find the total cost per square yard by dividing the total cost by the number of square feet in a square yard.

1 square yard = 9 square feet cost per square foot

= $469.44 ÷ 120 sq ft

= $3.91

We can convert this cost per square foot to cost per square yard by dividing by 9.

Cost per square yard = $3.91 ÷ 9

= $0.44

So, Navid spent $0.44 for each square foot of carpet. We can use this information to determine how much carpet Navid has left after installing the carpet. Navid bought a carpet for 120 square feet, but his bedroom floor is 120 square feet, so he used all the carpet he bought.

Therefore, Navid doesn't have any carpet left.

To know more about dimensions visit:

https://brainly.com/question/31106945

#SPJ11

Customers are used to evaluate preliminary product designs. In the past, 90% of highly successful products received good reviews, 80% of moderately successful products received good reviews and 5% of poor products received good reviews. In addition, 50% of products have been highly successful, 30% of have been moderately successful and 20% have been poor products. If a new design attains a good review, what is the probability that it is a poor product

Answers

The probability that it is a poor product given that it received a good review is 0.0148.

Let's solve the problem with Baye's theorem: Baye's theorem is used to find the probability of an event happening, based on the probability of another event that has already happened. It is expressed as P(A/B)= P(B/A) * P(A)/P(B).In this case, the events are:
A: The product is poor.
B: The product receives a good review.
P(A/B) is the probability that the product is poor, given that it receives a good review. P(B/A) is the probability that the product receives a good review, given that it is poor. P(A) is the probability that a product is poor. P(B) is the probability that a product receives a good review. Let's find out the probabilities for each event:

P(A) = 0.20P(B) = P(B/A) * P(A) + P(B/M) * P(M) + P(B/H) * P(H)

= 0.05 * 0.20 + 0.80 * 0.30 + 0.90 * 0.50

= 0.675P(B/A) = 0.05P(A/B) = P(B/A) * P(A)/P(B)

= (0.05 * 0.20)/0.675 = 0.0148

The probability that a new design attains a good review is 0.675. The probability that it is a poor product given that it received a good review is 0.0148.

Therefore, the probability that it is a poor product given that it received a good review is 0.0148.

To know more about probability visit:

https://brainly.com/question/31828911

#SPJ11

2) draw an example of a scatter plot with a correlation coefficient around 0.80 to 0.90 (answers may vary)

Answers

In this example, the data points are positively correlated, as the values of the x-axis increase, so do the values of the y-axis. The correlation coefficient is around 0.85, which indicates a strong positive correlation between the two variables.

what is variables?

In statistics and data analysis, a variable is a characteristic or attribute that can take different values or observations in a dataset. In other words, it is a quantity that can vary or change over time or between different individuals or objects. Variables can be classified into different types, including:

Categorical variables: These are variables that take on values that are categories or labels, such as "male" or "female", "red" or "blue", "yes" or "no". Categorical variables can be further divided into nominal variables (unordered categories) and ordinal variables (ordered categories).

Numerical variables: These are variables that take on numeric values, such as age, weight, height, temperature, and income. Numerical variables can be further divided into discrete variables (integer values) and continuous variables (any value within a range).

To learn more about  variables visit:

brainly.com/question/17344045

#SPJ11

Find the required linear model using least-squares regression The following table shows the number of operating federal credit unions in a certain country for several years. Year 2011 2012 2013 OI2014 2015 Number of federal credit unions 4173 429813005704 (a) Find a linear model for these data with x 11 corresponding to the year 2011. (b) Assuming the trend continues, estimate the number of federal credit unions in the year 2017 (a) The linear model for these data işy- x+ (Round to the nearest tenth as needed.) (b) The estimated number of credit unions for the year 2017 is (Round to the nearest integer as needed.)

Answers

To find the required linear model using least-squares regression, we first calculate the slope and y-intercept of the line that best fits the given data.

(a) We can use the formula for the slope and y-intercept of a least-squares regression line:

slope = r * (std_dev_y / std_dev_x)

y_intercept = mean_y - slope * mean_x

where r is the correlation coefficient between the two variables, std_dev_y and std_dev_x are the standard deviations of the dependent and independent variables, respectively, and mean_y and mean_x are the means of the dependent and independent variables, respectively.

Using the given data, we can calculate:

n = 5

sum_x = 10055

sum_y = 20884

sum_xy = 41938251

sum_x2 = 20125

sum_y2 = 46511306

mean_x = sum_x / n = 2011

mean_y = sum_y / n = 4177

std_dev_x = sqrt((sum_x2 / n) - mean_x^2) = 1.5811

std_dev_y = sqrt((sum_y2 / n) - mean_y^2) = 164.6483

r = (sum_xy - n * mean_x * mean_y) / (std_dev_x * std_dev_y * (n - 1)) = 0.9941

slope = r * (std_dev_y / std_dev_x) = 102.9552

y_intercept = mean_y - slope * mean_x = -199456.2988

Therefore, the linear model for these data is:

y = 102.9552x - 199456.2988

(b) To estimate the number of federal credit unions in the year 2017, we plug in x = 7 (corresponding to the year 2017) into the linear model and round to the nearest integer:

y = 102.9552(7) - 199456.2988 = 4605.0896

Rounding to the nearest integer, the estimated number of federal credit unions in the year 2017 is 4605.

To know more about standard deviations refer here:

https://brainly.com/question/23907081

#SPJ11

How much would you need to invest now to be able to withdraw $13,000 at the end of every year for the next 20 years? Assume a 12% interest rate. (Round your answer to the nearest whole dollar.)
The current investment amount required is?

Answers

To determine the investment amount needed to withdraw $13,000 at the end of each year for the next 20 years with a 12% interest rate, we can use the present value of the annuity formula.

The formula is as follows: PV = PMT * [(1 - (1 + r)^(-n)) / r]
Where PV is the present value (initial investment amount), PMT is the annual withdrawal amount ($13,000), r is the interest rate (12% or 0.12), and n is the number of years (20).

Plugging in the values, we get:

PV = $13,000 * [(1 - (1 + 0.12)^(-20)) / 0.12]

Calculating the values within the parentheses:

(1 + 0.12)^(-20) = 0.10396
1 - 0.10396 = 0.89604

Now, we can plug this value back into the formula:

PV = $13,000 * [0.89604 / 0.12]
PV = $13,000 * 7.46698

Finally, we can calculate the present value (initial investment amount):

PV = $97,070.74

Therefore, you would need to invest approximately $97,071 now to be able to withdraw $13,000 at the end of every year for the next 20 years, assuming a 12% interest rate.

Learn more about investment amount here:

https://brainly.com/question/29046602

#SPJ11

testing can only show the presence of defects and not necessarily their absence. group of answer choices true false

Answers

The statement Testing can only show the presence of defects and not necessarily their absence is true.

Testing is a process of executing a system or software with the intention of finding defects or errors. However, it is important to note that testing is not exhaustive and cannot guarantee the absence of defects. Even if a system or software passes all the tests conducted, it does not guarantee that there are no undiscovered defects or errors.

Testing can help identify and reveal the presence of defects or errors, but it cannot prove their absence conclusively. The absence of defects can only be inferred based on the extent and thoroughness of the testing performed, but it does not provide absolute certainty.

Therefore, it is true that testing can only show the presence of defects and not necessarily their absence.

To know more about testing click here :

https://brainly.com/question/31941684

#SPJ4

Pease help with this question

Answers

The weight of liquid in the hemisphere is 129408.2 pounds.

How to find the total weight of liquid in the hemisphere?

The tank is in the shape of an hemisphere and has a diameter of 18 feet. If the liquid fills the tank, it has a density of 84.8 pounds per cubic feet.

Therefore, total weight of the liquid can be found as follows:

density  = mass / volume

Therefore,

volume of the liquid in the hemisphere tank = 2 / 3 πr³

Therefore,

r = 18 / 2 = 9 ft

volume of the liquid in the hemisphere tank = 2 / 3 × 3.14 × 9³

volume of the liquid in the hemisphere tank = 4578.12 / 3

volume of the liquid in the hemisphere tank =  1526.04 ft³

Hence,

weighty of the liquid in the tank = 526.04 × 84.8 = 129408.192

weighty of the liquid in the tank = 129408.2 pounds

learn more on hemisphere here:https://brainly.com/question/13488583

#SPJ1

"At what positive x value, x>0, is the tangent line to the graph of y=x+2/x horizontal? Round answer to 4 decimal places."

Answers

Thus, at x ≈ 1.4142, the tangent line to the graph of y = x + 2/x is horizontal.

To find the x value where the tangent line of the graph y = x + 2/x is horizontal, we need to determine when the first derivative of the function is equal to 0.

This is because the slope of the tangent line is represented by the first derivative, and a horizontal line has a slope of 0.

First, let's find the derivative of y = x + 2/x with respect to x. To do this, we can rewrite the equation as y = x + 2x^(-1).

Now, we can differentiate:
y' = d(x)/dx + d(2x^(-1))/dx = 1 - 2x^(-2)

Next, we want to find the x value when y' = 0:
0 = 1 - 2x^(-2)

Now, we can solve for x:
2x^(-2) = 1
x^(-2) = 1/2
x^2 = 2
x = ±√2

Since we are looking for a positive x value, we can disregard the negative solution and round the positive solution to four decimal places:
x ≈ 1.4142

Thus, at x ≈ 1.4142, the tangent line to the graph of y = x + 2/x is horizontal.

Know more about the tangent line

https://brainly.com/question/30162650

#SPJ11

Find the volume of the solid xy=1, y=0, x=1, x=2 revolve first a) about the axis x=-1 then b) about the x-axis. Use the washer method.

Answers

The volume of the solid, obtained by revolving the region bounded by xy = 1, y = 0, x = 1, and x = 2, using the washer method, is: a) π/2 cubic units when revolved about the axis x = -1 and b) 7π/6 cubic units when revolved about the x-axis.

What is washer method?

The washer method is a technique used to calculate the volume of a solid of revolution. It involves integrating the cross-sectional area of the solid, which is obtained by subtracting the inner area from the outer area of a "washer" or "annulus" shape.

a) To find the volume when revolved about the axis x = -1, we consider the slices perpendicular to the x-axis. Each slice will have a radius equal to the distance from the axis of revolution to the curve, which is x + 1. The differential thickness of the slice is dx.

Thus, the volume of each washer-shaped slice is π(radius_outer² - radius_inner²)dx. Integrating this expression from x = 1 to x = 2, we get the volume as π/2 cubic units.

b) When revolved about the x-axis, we consider the slices perpendicular to the y-axis. The radius of each slice is y, and the differential thickness is dy. The limits of integration are y = 1 and y = 2. Using the washer method and integrating π(radius_outer² - radius_inner²)dy, we find the volume to be 7π/6 cubic units.

Therefore, the volume of the solid when revolved about the axis x = -1 is π/2 cubic units, and when revolved about the x-axis is 7π/6 cubic units.

To know more about integrating, refer here:
https://brainly.com/question/31040425
#SPJ4

Rebecca went over a jump on her skateboard. Her height above the
ground changed according to the equation y = -16x²+29x, where x
= time in seconds and y = height in feet. If this equation is graphed, is
the point (1.8, 0) a good approximation of an x-intercept?

Answers

The point (1.8, 0) a good approximation of an x-intercept

Is the point (1.8, 0) a good approximation of an x-intercept?

From the question, we have the following parameters that can be used in our computation:

y = -16x² + 29x

The x-intercept is when y = 0

So, we have

x = 1.8 and y = 0

When these values are substituted in the above equation, we have the following

-16(1.8)² + 29(1.8) = 0

Evaluate

0.36 = 0

0.36 approximates to 0

This means that the point (1.8, 0) a good approximation of an x-intercept

Read more about x-intercept at

https://brainly.com/question/3951754

#SPJ1

A cylindrical specimen of cold-worked copper has a ductility (%EL) of 25%. If its cold-worked radius is 10 mm (0. 40 in. ), what was its radius before deformation

Answers

The % elongation (%EL) is defined as the amount of deformation or elongation of a material before it fails. It is expressed as a percentage of the original length of the material.

To answer the question, we can use the formula for % elongation which is given by:

%EL = (Lf - Li) / Li * 100

where Lf is the final length of the specimen and Li is its original length.

Since the specimen is cylindrical, its original radius can be calculated from its original length using the formula for the circumference of a circle which is:

C = 2πr

where C is the circumference and r is the radius.

Therefore, the original radius can be calculated from the original circumference using the formula:

r = C / 2π

We are given that the specimen has a ductility (%EL) of 25%, which means that it has elongated by 25% before it failed. We are also given that its cold-worked radius is 10 mm (0.40 in.).

We can use this information to find its original radius as follows:

Let the original radius be r1.

Then, the final radius (after deformation) is:

r2 = 10 mm + 25% of 10 mm = 12.5 mm (0.50 in.)

Using the formula for the circumference of a circle, we have:

C1 = 2πr1

C2 = 2πr2

Substituting r2 = 12.5 mm and

C2 = 2πr2

in the above equations, we get:

C2 = 2π(12.5)

= 78.54 mm (3.10 in.)

Therefore, the original radius is:

r1 = C1 / 2π

= 78.54 mm / 2π

= 12.5 mm (0.50 in.)

Thus, the original radius of the copper specimen before deformation was 12.5 mm.

To know more about  circumference,visit:

https://brainly.com/question/28757341

#SPJ11

Three resistors in parallel have an equivalent resistance of 10 ohms. Two of the resistors have resistances of 40 ohms and 30 ohms. What is the resistance of the third resistor?

Answers

the resistance of the third resistor is 24 Ohms

How to determine the value

To determine the resistance, we need to know that the value of resistance connected in parallel is expressed as;

1/Rt  = 1/R1 + 1/R2 + 1/R3

Now, substitute the values of the resistance, we have that;

1/10 = 1/40 + 1/30 + 1/x

Find the lowest common factor, we have;

1/x = 1/10 - 1/40 - 1/30

1/x =  12 - 3 - 4  /120

Subtract the values of the numerators, we get;

1/x = 5/120

Now, cross multiply the values, we get;

5x = 120

Divide both sides by the coefficient of x, we get;

x = 120/5

x = 24 Ohms

Learn more about resistors at: https://brainly.com/question/24858512

#SPJ1

Solve using linear combination.


2e - 3f= - 9


e +3f= 18


Which ordered pair of the form (e. A) is the solution to the system of equations?


(27. 9)


(3. 27)


19. 3)


O (3. 5

Answers

The solution to the system of equations is (3, 19/8). option (C) is correct.

The given system of equations are:

2e - 3f = -9 ... Equation (1)

e + 3f = 18 ... Equation (2)

Solving using linear combination:

Step 1: Rearrange the equations to be in the form

Ax + By = C.

Multiply Equation (1) by 3, and Equation (2) by 2 to get:

6e - 9f = -27 ... Equation (3)

2e + 6f = 36 ... Equation (4)

Step 2: Add the two resulting equations (Equation 3 and 4) in order to eliminate f.

6e - 9f + 2e + 6f = -27 + 36

==> 8e = 9

==> e = 9/8

Step 3: Substitute the value of e into one of the original equations to solve for f.

e + 3f = 18

Substituting the value of e= 9/8, we have:

9/8 + 3f = 18

==> 3f = 18 - 9/8

==> 3f = 143/8

==> f = 143/24

Therefore, the ordered pair of the form (e, f) that satisfies the system of equations is (9/8, 143/24).

Rationalizing the above result, we can get the solution as follows:

(9/8, 143/24) × 3 / 3(27/24, 143/8) × 1/3(3/8, 143/24) × 8 / 8(3, 19/8)

Therefore, the solution to the system of equations is (3, 19/8).

Hence, option (C) (3, 19/8) is correct.

To know more about system of equations visit:

https://brainly.com/question/21620502

#SPJ11

The circle (x−5)^2 + (y−3)^2 = 16 can be drawn with parametric equations. Assume the circle is traced clockwise as the parameter increases.
If x=5+4cost
then y= __

Answers

Given the circle equation: (x-5)^2 + (y-3)^2 = 16

Since we have the parametric equation for x: x = 5 + 4cos(t), we need to find the parametric equation for y.

To do this, let's substitute the given parametric equation for x into the circle equation:

(5 + 4cos(t) - 5)^2 + (y - 3)^2 = 16

Simplifying, we get:

(4cos(t))^2 + (y - 3)^2 = 16

Now, since we are going clockwise, we will use -sin(t) instead of sin(t) for the parametric equation for y:

(4cos(t))^2 + (3 - 4sin(t) - 3)^2 = 16

Simplifying, we get:

(4cos(t))^2 + (-4sin(t))^2 = 16

Now, we know that (cos(t))^2 + (sin(t))^2 = 1, so:

(4^2)((cos(t))^2 + (sin(t))^2) = 16
16(1) = 16

This equation holds true, so our parametric equation for y is:

y = 3 - 4sin(t)

Therefore, the complete parametric equations for the circle traced clockwise are:

x = 5 + 4cos(t)
y = 3 - 4sin(t)

To know more about circle visit:

https://brainly.com/question/24375372

#SPJ11

Who has the best conclusion? a. joe said the average grade was a 75. b. collin said almost 15% made between a 91 and a 100. c. paulina said most of the class made between a 71 and a 80. d. quannah said that most of the students understood the concepts that were not tested.

Answers

The best conclusion amongst the following options is Paulina's statement that most of the class made between a 71 and 80.What is a conclusion?

A conclusion is an explanation or reasoning based on the observations and data. It is the final decision that is made by analyzing the information gathered. It is very important to make a correct conclusion as it reflects the accuracy of the data gathered and analyzed by an individual.

What is the given information? Joe said the average grade was a 75.Collin said almost 15% made between a 91 and a 100.Paulina said most of the class made between a 71 and a 80. Quannah said that most of the students understood the concepts that were not tested. Amongst these options, the statement made by Paulina is more precise, clear, and based on the data given. She used the term "most," which means the largest part or majority. Therefore, we can say that the majority of the class's grades were between 71-80. Hence, Paulina's conclusion is the best.

Know more about average grade here:

https://brainly.com/question/11322891

#SPJ11

2 of 8
What is the value of y?
O
N
7yº
(4y - 15)°
M

Answers

The value of y is 14

What is an isosceles triangle?

A triangle is a polygon with three sides having three vertices. There are different types of triangle. We have , isosceles triangle, scalene triangles, right triangle e.t.c

Isosceles triangle is a type of triangle in which two sides and the corresponding angles are equal.

The sum of angle In a triangle is 180°. i.e A+B+C = 180°

Therefore;

4y-15+4y-15 +7y = 180°

8y -30+7y = 180°

15y = 180+30

15y = 210

divide both sides by 15

y = 210/15

y = 70/5

y = 14

Therefore the value of x is 14

learn more about Isosceles triangle from

https://brainly.com/question/1475130

#SPJ1

Determine whether the following statement is true or false.
A parabola with focal diameter 3 is narrower than a parabola with focal diameter 2.Choose the correct answer below.OA. The statement is false because the focal diameter determines the size of the opening of the parabola. The larger the focal diameter, the wider the parabola.
OB. The statement is false because the size of the opening of the parabola depends upon the distance between the vertex and the focus.
OC. The statement is true because the focal diameter determines the size of the opening of the parabola. The larger the focal diameter, the narrower the parabola.
OD. The statement is false because the size of the opening of the parabola depends on the position of the vertex and the focus on the coordinate system.

Answers

The answer is : OA. The statement is false because the focal diameter determines the size of the opening of the parabola. The larger the focal diameter, the wider the parabola.

The statement is false because the size of the opening of a parabola is determined by the distance between its focus and directrix, not by the focal diameter. The focal diameter is defined as the distance between the two points on the parabola that intersect with the axis of symmetry and lie on opposite sides of the vertex. It is twice the distance between the focus and vertex.

In a standard parabolic equation of the form y = ax^2 + bx + c, the coefficient a determines the "width" of the parabola. If a is positive, the parabola opens upwards, and if a is negative, the parabola opens downwards. The larger the absolute value of a, the narrower the parabola.

Therefore, a parabola with a larger focal diameter actually has a wider opening, since it corresponds to a smaller absolute value of a in the standard equation. Hence, the statement "A parabola with focal diameter 3 is narrower than a parabola with focal diameter 2" is false.

To know more about parabola refer here:

https://brainly.com/question/31142122?#

SPJ11

Perimeter is 25 cm, find x 10 8.2 cm​

Answers

The value of x is 3.4 cm

Find the x-coordinate of the center of mass of the lamina that occupies the region D and has the given density function p(x,y) = x + y Dis triangular region with vertices (0,0), (2, 1), (0.3)

Answers

The x-coordinate of the center of mass of the given lamina is 0.8.

The center of mass of a lamina is given by the equations:

[tex]Xc[/tex] = (1/M) ∬(D) x[tex]p(x,y) dA[/tex] and [tex]Yc[/tex] = (1/M) ∬(D) y [tex]p(x,y) dA[/tex]

where M is the total mass of the lamina and D is the region occupied by the lamina. In this problem, the density function is given as p(x,y) = x + y, and the region D is a triangular region with vertices (0,0), (2, 1), and (0.3).

To find the x-coordinate of the center of mass, we need to evaluate the double integral Xc = (1/M) ∬(D) x[tex]p(x,y) dA[/tex]. First, we need to find the mass of the lamina. This can be done by integrating the density function over the region D:

M = ∬(D) [tex]p(x,y) dA[/tex] = ∫(0,1) ∫(0,2-0.5y) (x+y) dx dy = 1.45

Now we can evaluate the double integral for [tex]Xc[/tex]:

[tex]Xc[/tex] = (1/M) ∬(D) x p(x,y) dA = ∫(0,1) ∫(0,2-0.5y) [tex]x(x+y)dydx =[/tex] 0.8

Therefore, the x-coordinate of the center of mass of the given lamina is 0.8.

Learn more about vertices here:

https://brainly.com/question/29154919

#SPJ11

Solve the equation for solutions over the interval [0,2x) by first solving for the trigonometric function. 8 sin x+8 = 12 Select the correct choice below and, if necessary, fill in the answer box to complete your choice. O A. The solution set is { }. (Type an exact answer, using a as needed. Use a comma to separate answers as needed.) OB. The solution is the empty set. Click to select and enter your answer(s).

Answers

Solve the equation for solutions over the interval [0,2x) by first solving for the trigonometric function 8 sin x+8 = 12 give the solution which is an empty set(B).

The given equation is 8sin(x) + 8 = 12. We first isolate sin(x) by subtracting 8 from both sides, giving us 8sin(x) = 4. Then, we divide both sides by 8 to get sin(x) = 1/2. Since the interval is [0,2x), we need to find all solutions for sin(x) = 1/2 within this interval.

The solutions are x = π/6 and x = 5π/6. However, neither of these solutions lie within the given interval [0,2x). Therefore, the B) solution set is empty, and the equation has no solutions within the given interval.

For more questions like Function click the link below:

https://brainly.com/question/16008229

#SPJ11

lets consider the following sets a={1,2,3,6,7} b={3,6,7,8,9}. find the number of all subsets of the set a union b with 4 elements

Answers

To find the number of all subsets of the set A ∪ B with 4 elements, where A = {1, 2, 3, 6, 7} and B = {3, 6, 7, 8, 9}, we need to consider all possible combinations of elements from the union of A and B that have a cardinality of 4.

The cardinality of the union A ∪ B is 9, as it contains all distinct elements from both sets. We need to choose 4 elements from this union, which can be done in C(9, 4) ways, where C(n, r) denotes the combination of selecting r elements from a set of n elements.

Using the formula for combinations, C(n, r) = n! / (r! * (n - r)!), we can calculate the number of subsets.

C(9, 4) = 9! / (4! * (9 - 4)!) = 9! / (4! * 5!) = (9 * 8 * 7 * 6) / (4 * 3 * 2 * 1) = 126.

Therefore, there are 126 subsets of the set A ∪ B with 4 elements.

Learn more about subsets here: brainly.com/question/32386149

#SPJ11

In the​ figure, m∠1=(7x+7)°​, m∠2=(5x+14)°​, and m∠4=(13x+12)°. Your friend incorrectly says that m∠4=59°. What is m∠​4? What mistake might your friend have​ made?

Answers

No, your friend is incorrect.

Th measure of angle 4 is 129 degrees

How to determine the value

We need to know that the sum of the interior angles of a triangle is equal to 180 degrees.

Then, we have that;

m<1 + m<2 + (180 - m< 4) = 180

substitute the values, we have;

7x + 7 + 5x + 14 + (168 -13x) = 180

expand the bracket, we have;

7x + 7 + 5x + 14 + 168 - 13x = 180

collect the like terms, we get;

7x + 5x - 13x = 180 - 189

12x - 13x = -9

subtract the like terms, we have;

-x = -9

Make 'x' the subject of formula, we have;

x = 9 degrees

m<4 = 129 degrees

Learn more about triangles at: https://brainly.com/question/14285697

#SPJ1

The annual depreciation schedules for Straight-Line Depreciation (SLN) and Declining Balance Depreciation (DB) are: a. The same b. Different. With DB, the same amount of depreciation is recorded for every period, while with SLN, different amount of depreciation is recorded for each period. c. Different. With SLN the same amount of depreciation is recorded for every period, while with DB, different amount of depreciation is recorded for each period d. None of the above

Answers

The correct answer is B. The annual depreciation schedules for Straight-Line Depreciation (SLN) and Declining Balance Depreciation (DB) are different.

With DB, the same percentage of depreciation is recorded for every period, but the actual amount of depreciation decreases each period. This results in a higher depreciation expense in the earlier years and a lower expense in the later years. On the other hand, with SLN, the same amount of depreciation is recorded for each period, resulting in a consistent depreciation expense throughout the asset's useful life. Choosing the right depreciation method is important for accurately reflecting an asset's value over time and for tax purposes. Both SLN and DB have their advantages and disadvantages, and the choice often depends on the specific needs of the business and the asset in question. SLN is simple and easy to understand, while DB allows for a larger tax deduction in the early years of an asset's life. It is important to consult with a financial professional to determine the best depreciation method for your business.

Learn more about DB here:

https://brainly.com/question/31180880

#SPJ11

Mr. Hernandez bakes specialty cakes. He uses many different containers of various sizes and shapes to
bake the parts of his cakes. Select all of the following containers which hold the same amount of batter
Need Help ASAP!

Answers

Answer:

The answer is A and B

The volume of a sphere with radius r is given by the formula V = (4/3)πr^3. The volume of a hemisphere with radius r is given by the formula V = (2/3)πr^3.

If we substitute r = 2 cm in the formulas, we get:

- Volume of sphere = (4/3)π(2)^3 = (4/3)π(8) = 32/3π

- Volume of hemisphere = (2/3)π(2)^3 = (2/3)π(8) = 16/3π

So, the sphere with a radius of 2 cm and the hemisphere with a radius of 5 cm have the same volume of 32/3π cubic centimeters.

The volume of a cylinder with radius r and height h is given by the formula V = πr^2h.

If we substitute r = 10 cm and h = 7 cm in the formula, we get:

- Volume of cylinder = π(10)^2(7) = 700π cubic centimeters

The volume of a cone with radius r and height h is given by the formula V = (1/3)πr^2h.

If we substitute r = 4 cm and h = 2 cm in the formula, we get:

- Volume of cone = (1/3)π(4)^2(2) = 32/3π cubic centimeters.

Therefore, the cylinder and the cone do not hold the same amount of batter as the sphere and the hemisphere.

Using Matlab, find an approximation to√3 correct to within 10−4 using the Bisection method(Hint: Consider f(x) = x2 −3.) Please show code and answer question.Pseudo Code for Bisection Method:Given [a,b] containing a zero of f(x);tolerance = 1.e-7; nmax = 1000; itcount = 0; error = 1;while (itcount <=nmax && error >=tolerance)itcount = itcount + 1;x= (a+b)/2;error =abs(f(x));If f(a)*f(x) < 0then b=x;else a=x;end while.

Answers

The approximation to sqrt(3) is 1.7321

This is an approximation to √3 correct to within 10^-4, as requested.

Here is the Matlab code that uses the Bisection method to approximate √3:

% Define the function f(x)

f = (x) x^2 - 3;

% Define the initial interval [a,b]

a = 1;

b = 2;

% Define the tolerance and maximum number of iterations

tolerance = 1e-4;

nmax = 1000;

% Initialize the iteration counter and error

itcount = 0;

error = 1;

% Perform the bisection method until the error is below the tolerance or the

% maximum number of iterations is reached

while (itcount <= nmax && error >= tolerance)

   itcount = itcount + 1;

   x = (a + b) / 2;

   error = abs(f(x));

   if f(a) * f(x) < 0

       b = x;

   else

       a = x;

   end

end

% Print the approximation to sqrt(3)

fprintf('The approximation to sqrt(3) is %.4f\n', x);

The output of the code is:

The approximation to sqrt(3) is 1.7321

This is an approximation to √3 correct to within 10^-4, as requested.

Learn more about approximation here:

https://brainly.com/question/29669607

#SPJ11

Scott is using a 12 foot ramp to help load furniture into the back of a moving truck. If the back of the truck is 3. 5 feet from the ground, what is the horizontal distance from where the ramp reaches the ground to the truck? Round to the nearest tenth. The horizontal distance is

Answers

The horizontal distance from where the ramp reaches the ground to the truck is 11.9 feet.

Scott is using a 12-foot ramp to help load furniture into the back of a moving truck.

If the back of the truck is 3.5 feet from the ground,

Round to the nearest tenth.

The horizontal distance is 11.9 feet.

The horizontal distance is given by the base of the right triangle, so we use the Pythagorean theorem to solve for the unknown hypotenuse.

c² = a² + b²

where c = 12 feet (hypotenuse),

a = unknown (horizontal distance), and

b = 3.5 feet (height).

We get:

12² = a² + 3.5²

a² = 12² - 3.5²

a² = 138.25

a = √138.25

a = 11.76 feet

≈ 11.9 feet (rounded to the nearest tenth)

The correct answer is 11.9 feet.

To know more about  distance,visit:

https://brainly.com/question/13034462

#SPJ11

Other Questions
What is the greatest advantage of socialism? HELP ME THIS IS DUE SOON!!!List the different phenotypes in the F generation. Whatthe frequency of each phenotype? One is filled out for you I really need help with these two attachments. ASAP!!!Thanks!I'll give brainliest too. according to president johnson what is the relationship between democracy and the right to vote Is x3 an exponential function? How to test the normality of regression ? page 6 1.1. what is anthropology? forensic anthropology is the scientific examination of skeletons in hope of identifying who they were in life and what happened to them. to which of the following branches, or subdisciplines, of anthropology does forensic anthropology belong? Why did the Mayflower Pilgrims land at Plymouth? A. They wanted to escape the restrictions of their charter to be free of English rule. B.They were thrown off course and were no longer in the area specified in their charter.C.They did not want to be near the Jamestown colonists or other groups settling in Virginia.D.They found the climate more like that of Holland, which they had grown accustomed to.E.They headed north suddenly after spotting what they thought was a Spanish warship. Saturn's moon Titan is in a nearly circular orbit of radius 1.22 x 10^9 m and period 15.9days. Determine the mass of Saturn Use the following chemical reaction figure to answer the question below. What is the atomic number of the cation formed in the reaction illustrated above? Select one: a. 11 b. 10 c. 8 d. 1 e. 16 1. Vulnerability Scanner?2. Ping Scanner?3. Port Scanner?4. Network Mapper?5. Password Cracker? The length of the base of an isosceles triangle is x. The length of a leg is x. The perimeter of the triangle is. Find x. Which of the following statements BEST describe jurisdiction?a. the government representative in a criminal caseb. crimes for which the punishment is greater than one yearc. the geographical area a court controls and kinds of cases a court hearsd. a third party who has no interest in a case and agrees to help settle adispute How did the Protestant reformation impact the development of nation-states? I am used to relocate the steering wheel to a more comfortable position for driving. Whatam I? How does it help me as the driver? Calculate the total number of atoms in 0.111 mol of Fe(CO)3(PH3)2. please write as many steps as you can so I can understand it. A thesis for a critical analysis essay should identify what the author wanted to accomplish and then assess the author's success in doing so.You have just read the passage The Future of the USPS. Write a sample thesis statement for a multi-page critical analysis essay that presents your opinion about the passage's effectiveness. Please help me someone Someone please help me I need to pass this before 5 o clock how are geological features evidence of change over time