Answer:
the difference is fumaric acid the carboxylic acid groups are trans (E) and in maleic acid they are cis (Z)
Explanation:
and Fumarate is an intermediate in the citric acid cycle used by cells to produce energy in the form of adenosine triphosphate (ATP) from food
One gram of iron(ii) chloride has a higher mass percentage of chloride than 1 gram of iron(iii) chloride.a. Trueb. False
The one gram of iron(II) chloride has a higher mass percentage of chloride than one gram of iron(III) chloride. The answer is True.
In iron(II) chloride (FeCl₂), the mass percentage of chloride is lower than in iron(III) chloride (FeCl₃) when comparing 1 gram of each compound.
The correct answer is: a. True.
Iron(II) chloride, also known as ferrous chloride, has a chemical formula FeCl2, which means it contains one iron ion (Fe2+) and two chloride ions (Cl-) in its structure. On the other hand, iron(III) chloride, also known as ferric chloride, has a chemical formula FeCl3, which means it contains one iron ion (Fe3+) and three chloride ions (Cl-) in its structure.
The molar mass of each ion and add them up to get the molar mass of the compound. Then, we divide the molar mass of chloride by the molar mass of the whole compound and multiply by 100 to get the percentage.
For iron(II) chloride, the molar mass of Fe2+ is 55.85 g/mol, and the molar mass of two Cl- ions is 2 x 35.45 g/mol = 70.90 g/mol. Therefore, the molar mass of FeCl2 is 55.85 + 70.90 = 126.75 g/mol. The mass of chloride in one gram of FeCl2 is 2 x 35.45 g/mol = 70.90 g/mol, which means the mass percentage of chloride is 70.90/126.75 x 100% = 55.97%.
For iron(III) chloride, the molar mass of Fe3+ is 55.85 x 3 = 167.55 g/mol, and the molar mass of three Cl- ions is 3 x 35.45 g/mol = 106.35 g/mol. The molar mass of FeCl3 is 167.55 + 106.35 = 273.90 g/mol. The mass of chloride in one gram of FeCl3 is 3 x 35.45 g/mol = 106.35 g/mol, which means the mass percentage of chloride is 106.35/273.90 x 100% = 38.84%.
To know more about chloride visit:-
https://brainly.com/question/15296925
#SPJ11
Cd(s) + 2Ag+(aq) → 2Ag(s) + Cd2+(aq)a) write the two half reactions for the following redox reaction.b) identify wich one is oxidation and which is reductionc) calculate the overall standard reaction potential at 25
The two half-reactions for the given redox reaction are; Oxidation; Cd(s) → Cd²⁺(aq) + 2e⁻, Reduction; 2Ag⁺(aq) + 2e⁻ → 2Ag(s), Cd is losing electrons, so it is being oxidized. Ag⁺ is gaining electrons, so it is being reduced, and the overall standard reaction potential at 25°C is +1.20 V.
The two half-reactions for the given redox reaction are;
Oxidation; Cd(s) → Cd²⁺(aq) + 2e⁻
Reduction; 2Ag⁺(aq) + 2e⁻ → 2Ag(s)
In the oxidation half-reaction, Cd loses two electrons to form Cd²⁺, so it is the oxidation half-reaction. In the reduction half-reaction, 2Ag⁺ ions gain two electrons to form solid Ag, so it is the reduction half-reaction.
The standard reduction potentials (E°) for the half-reactions can be looked up in a table. The E° value for the reduction half-reaction is +0.80 V, and for the oxidation half-reaction, it is −0.40 V. To calculate the overall standard reaction potential, we need to add the E° values of the reduction and oxidation half-reactions.
E°cell = E°reduction - E°oxidation
E°cell = +0.80 V - (-0.40 V)
E°cell = +1.20 V
Since the overall E° value is positive, the reaction is spontaneous in the forward direction under standard conditions.
To know more about standard reduction potentials here
https://brainly.com/question/32132054
#SPJ4
Which of following will increase the non-ideal behavior of gases? 1. Increasing system volume II. Increasing system temperature III. Increasing system pressure IV. Increasing the number of gas molecules OIV only O II, III and IV lll and IV O land II Previous
please helpp!!
The ideal gas behavior is only observed when the gases have zero volume and no intermolecular forces among them. However, in reality, gases have a small volume and some weak intermolecular forces. The behaviour of the gases is more non-ideal under certain conditions.
Out of the given options, the following will increase the non-ideal behavior of gases are increasing the system volume, increasing the system temperature and increasing the number of gas molecules. Therefore, the correct options are (II), (III) and (IV). When the gas particles come closer to each other, the intermolecular forces between them start to become important, and the gas no longer obeys the ideal gas laws. The ideal gas law is described as PV=nRT, where P is pressure, V is volume, n is the number of molecules, R is the universal gas constant, and T is temperature. Ideal gases have high temperature and low pressure. Ideal gas behavior is observed when the volume is high, the temperature is high, and pressure is low, whereas non-ideal behavior is observed when the volume is low, temperature is low, and pressure is high.
Learn more about ideal gas laws. here ;
https://brainly.com/question/6534096
#SPJ11
The coordination complex, [Pt(NH3)3(NO2)]+, displays linkage isomerism. Draw the structural formula of the complex ion for each of the linkage isomers.
Draw one structure per sketcher box, and separate added sketcher boxes with the + sign
Explicitly draw all H atoms.
Do not include lone pairs in your answer. They will not be considered in the grading.
Do not include charges in your answer. They will not be considered in the grading.
Do not include counter-ions, e.g., Na+, I-, in your answer.
The nitrito isomer has the NO2 group bonded to the Pt center through the nitrogen atom, while the nitro isomer has the NO2 group bonded to the Pt center through the oxygen atom.
Linkage isomerism is a type of isomerism in which a ligand can coordinate through different atoms. The coordination complex [Pt(NH3)3(NO2)]+ exhibits linkage isomerism due to the ability of NO2 to bind to the Pt center through either the nitrogen or oxygen atom. Therefore, two isomers are possible: the nitrito and nitro isomers.
The nitrito isomer has the NO2 group bonded to the Pt center through the nitrogen atom. The three NH3 ligands are then coordinated to the Pt center through their nitrogen atoms. The structural formula of the nitrito isomer can be represented as [Pt(NH3)3(ONO)]+.
On the other hand, the nitro isomer has the NO2 group bonded to the Pt center through the oxygen atom. The three NH3 ligands are then coordinated to the Pt center through their nitrogen atoms. The structural formula of the nitro isomer can be represented as [Pt(NH3)3(ONO)]+.
In summary, the coordination complex [Pt(NH3)3(NO2)]+ exhibits linkage isomerism, resulting in two isomers: the nitrito and nitro isomers.
To know more about structural formula visit:
https://brainly.com/question/31115811
#SPJ11
What would be the volume in liters of an 25. 15 liter sample of gas at 201 °C and 2. 31 atm if conditions were changed to STP? 1 atm = 101. 3 kPa = 760 mmHg 36. 46 L 78. 12 L W 12. 51 L 45. 32 L
To determine the volume in liters of a 25.15 liter sample of gas at 201°C and 2.31 atm when conditions are changed to STP, use the ideal gas law equation: PV = nRT,
Where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature in Kelvin.
First, we need to convert the given temperature from Celsius to Kelvin:
Temperature in Kelvin (T) = 201°C + 273.15 = 474.15 K
Next, we can rearrange the ideal gas law equation to solve for the new volume at STP V1 / T1 = V2 / T2
Where V1 is the initial volume, T1 is the initial temperature, V2 is the final volume (unknown), and T2 is the final temperature (STP, which is 273.15 K).
Plugging in the values: 25.15 L / 474.15 K = V2 / 273.15 K
Now, we solve for V2:
V2 = (25.15 L / 474.15 K) * 273.15 K = 14.49 L
Therefore, the volume of the 25.15 liter sample of gas at 201°C and 2.31 atm, when conditions are changed to STP, is approximately 14.49 L. Therefore, the correct option is W) 12.51 L.
Learn more about ideal gas law here
https://brainly.com/question/6534096
#SPJ11
determine the end (final) value of n in a hydrogen atom transition, if the electron starts in n = 2 and the atom absorbs a photon of light with a frequency of 4.57 e14 hz.
The final value of n is 3.
When an electron in a hydrogen atom absorbs a photon of light, it gains energy and moves to a higher energy level. The energy gained by the electron is given by the equation E = hf, where E is the energy gained, h is Planck's constant, and f is the frequency of the absorbed photon.
In this case, the frequency of the absorbed photon is 4.57 x 10^14 Hz. We can use this frequency to calculate the energy gained by the electron:
[tex]E = hf = (6.626 x 10^-34 J s) x (4.57 x 10^14 Hz) = 3.03 x 10^-19 J[/tex]
The energy gained by the electron is equal to the energy difference between the initial and final energy levels of the electron. The initial energy level is n=2 and the final energy level is n, so we can use the Rydberg formula to find the final value of n:
[tex]1/λ = R(1/n1^2 - 1/n2^2)[/tex]
where λ is the wavelength of the absorbed photon, R is the Rydberg constant (1.097 x 10^7 m^-1), and n1 and n2 are the initial and final energy levels, respectively.
We can solve this equation for n2:
[tex]1/λ = R(1/n1^2 - 1/n2^2)1/(3.47 x 10^-7 m) = (1.097 x 10^7 m^-1)(1/2^2 - 1/n2^2)n2 = 3[/tex]
Therefore, the final value of n is 3.
Learn more about electron here:
https://brainly.com/question/29657983
#SPJ11
2. why is it necessary to remove tert-butylcatechol from commercially available styrene before preparing polystyrene?
It is necessary to remove tert-butylcatechol from commercially available styrene before preparing polystyrene because it acts as a polymerization inhibitor, which can impede the formation of the polymer.
Tert-butylcatechol is commonly added to styrene as a stabilizer to prevent it from undergoing unwanted polymerization during storage and transportation. However, when styrene is used to make polystyrene, the presence of tert-butylcatechol can interfere with the polymerization process and hinder the formation of the desired polymer. This can result in a decrease in the quality of the polystyrene produced, as well as issues with processing and manufacturing. Therefore, it is necessary to remove tert-butylcatechol from commercially available styrene before using it to prepare polystyrene. This is typically done through a purification process, such as distillation or adsorption, to ensure that the styrene is free of inhibitors and suitable for use in polymerization reactions.
Learn more about butylcatechol here:
https://brainly.com/question/31060008
#SPJ11
Definition: This is the number of complete movements of a wave per second.
Example: a radio station may be 103. 3 Megahertz
Term: Type term here
(SSPA
Frequency is the number of full vibrations of a wave that occur per unit of time. This term is usually expressed in Hertz (Hz), where one Hz is equivalent to one full cycle per second.
The frequency is the reciprocal of the wavelength.
Frequency has a direct relation with time, as they are inversely proportional to each other. The higher the frequency, the shorter the time period, and the lower the frequency, the longer the time period. The radio frequency of 103.3 Megahertz (MHz) means that the radio wave is cycling 103.3 million times per second. Therefore, the frequency of radio waves is measured in Hertz, which equals to 1/second.It is critical to know about frequency in the field of telecommunication. They are used in a variety of communications, such as broadcasting, cellphones, television, and satellite communications. The frequency of waves varies according to the wavelength, and a radio station can broadcast at a specific frequency. For instance, the frequency range for television broadcasting in the United States is between 54 to 88 MHz and from 174 to 216 MHz. Additionally, microwave frequencies are used to connect network devices, such as computer networks, to the internet.
The abbreviation SSPA refers to Solid State Power Amplifier. It is a linear or nonlinear device used to amplify microwave signals. It is usually used in a wide range of applications, including telecommunications, space communication, broadcasting, military, scientific, and medical fields, and more. It is an improvement over traditional vacuum tubes because it does not require warm-up time, and it is more reliable.
To learn more about Frequency, refer:-
https://brainly.com/question/14316711
#SPJ11
The standart heat of combustion of propene, C3H6(g), is -2058 kj/mol C3H6(g). Use this value and other data from this example to determine AH for the hydrogenation of propene to propane.CH3CH=CH2 (g) + H2(g) ---> CH3CH2CH3(g)AH=?C3H8(g) AHcomb = -2219.9 kjH2(g)AHcomb = -285.8 kjC(graphite) AHcomb = -393.5 kj
The standard heat of hydrogenation of propene to propane is -501.6 kJ/mol.
How do we calculate?The balanced chemical equation for the combustion of propane is:
[tex]C_3H_8[/tex](g) + [tex]5O_2[/tex] (g) → [tex]3CO_2[/tex](g) + [tex]4H_2O[/tex] (l)
With reference to the balanced equation, the standard heat of combustion of propane can be calculated as:
AH°combustion of [tex]C_3H_8[/tex]= [(3 mol [tex]CO_2[/tex] × AH°f of [tex]CO_2[/tex]) + (4 mol [tex]H_2O[/tex] × AH°f of [tex]H_2O[/tex])] - (1 mol [tex]C_3H_8[/tex] × AH°f of [tex]C_3H_8[/tex])
AH°combustion = [(3 mol × -393.5 kJ/mol) + (4 mol × -285.8 kJ/mol)] - (-2219.9 kJ/mol)
AH°combustion = -2220.1 kJ/mol
The standard heat of formation of [tex]C_3H_8[/tex] is found from the following equation:
AH°f of [tex]CH_3CH_2CH_3[/tex] = AH°combustion of [tex]CH_3CH_2CH_3[/tex] / 3
AH°f of [tex]CH_3CH_2CH_3[/tex] = (-2219.9 kJ/mol)/ 3
AH°f of [tex]CH_3CH_2CH_3[/tex] = -740 kJ/mol
We then apply the Hess's law to calculate the standard heat of hydrogenation of propene to propane:
AH° = AH°f of [tex]CH_3CH_2CH_3[/tex] - (AH°f of [tex]CH_3CH[/tex]=[tex]CH_2[/tex] + 1/2 AH°f of [tex]H_2[/tex])
AH° = (-740 kJ/mol) - [(2 × -119.2 kJ/mol) + 1/2 (0 kJ/mol)]
AH° = -740 kJ/mol + 238.4 kJ/mol
AH° = -501.6 kJ/mol
Learn more about standard heat at:
https://brainly.com/question/29981442
#SPJ1
8. what will happen to the concentration of zn2 ions as the reaction proceed
Without specific information about the reaction involving the Zn2+ ions, it is difficult to provide a definitive answer. However, in a typical chemical reaction involving Zn2+ ions, the concentration of Zn2+ ions will depend on the stoichiometry of the reaction and the rate of the reaction.
In general, if the reaction is exothermic and the concentration of Zn2+ ions is high, the reaction will shift towards the products and the concentration of Zn2+ ions will decrease.
Conversely, if the reaction is endothermic and the concentration of Zn2+ ions is low, the reaction will shift towards the reactants and the concentration of Zn2+ ions will increase.
Additionally, if the reaction involves Zn2+ ions as a reactant, the concentration of Zn2+ ions will decrease as the reaction proceeds.
If the reaction involves Zn2+ ions as a product, the concentration of Zn2+ ions will increase as the reaction proceeds, until the reaction reaches equilibrium.
To know more about "Stoichiometry " refer here:
https://brainly.com/question/28780091#
#SPJ11
TRUE/FALSE. Chemical digestion is a series of chemical reactions that break large chunks of food into proteins, carbohydrates, and fats.
The given statement "Chemical digestion is a series of chemical reactions that break large chunks of food into proteins, carbohydrates, and fats" is false because chemical digestion breaks down large macromolecules such as proteins, carbohydrates, and fats into smaller molecules such as amino acids, glucose, and fatty acids.
Chemical digestion is one of the two main types of digestion that occur in the digestive system. It involves the breakdown of large macromolecules such as proteins, carbohydrates, and fats into smaller molecules that can be absorbed and used by the body.
Chemical digestion occurs through a series of chemical reactions that are catalyzed by enzymes secreted by the digestive system. For example, proteins are broken down into amino acids by protease enzymes, carbohydrates are broken down into glucose by amylase enzymes, and fats are broken down into fatty acids and glycerol by lipase enzymes.
The resulting smaller molecules are then absorbed into the bloodstream and transported to cells throughout the body where they are used for energy, growth, and repair.
To know more about Chemical digestion refer here:
https://brainly.com/question/10343076#
#SPJ11
determine the electron geometry (eg), molecular geometry (mg), and polarity of n2o (n central).
Hi! The N2O molecule (with N central) has the following properties:
Electron Geometry (eg): In N2O, the central nitrogen atom has two bonding domains (a double bond with the other nitrogen atom and a single bond with the oxygen atom) and one lone pair. This gives it a total of three electron domains. Therefore, the electron geometry of the central nitrogen atom in N2O is trigonal planar.
Molecular Geometry (mg): With two bonding domains and one lone pair on the central nitrogen atom, the molecular geometry of N2O is bent or V-shaped.
Polarity: Due to the bent molecular geometry and the difference in electronegativity between nitrogen and oxygen, N2O has an uneven distribution of electron density, resulting in a polar molecule.
So, for N2O (N central), the electron geometry is trigonal planar, the molecular geometry is bent, and the molecule is polar.
learn more about molecular geometry
https://brainly.in/question/16244127?referrer=searchResults
#SPJ11
How many moles of water are produced from the reaction of 50. 0g of methane (CH4)? Show your work
To determine the number of moles of water produced from the reaction of 50.0 g of methane (CH4), we need to use the balanced chemical equation for the reaction. Without the specific reaction, it is not possible to provide an exact answer. However, we can outline the general steps involved in the calculation.
First, we need to determine the balanced chemical equation for the reaction between methane and the other reactant(s) to produce water. Once we have the balanced equation, we can identify the stoichiometric ratio between methane and water. The coefficients in the balanced equation represent the mole ratio between the reactants and products.
Next, we convert the given mass of methane (50.0 g) to moles. This is done by dividing the mass by the molar mass of methane (16.04 g/mol for CH4).
Finally, using the mole ratio obtained from the balanced equation, we can determine the number of moles of water produced from the given amount of methane.
In summary, to calculate the number of moles of water produced from the reaction of 50.0 g of methane, we need the balanced chemical equation, convert the given mass of methane to moles, and apply the mole ratio to determine the moles of water.
To learn more about Molar mass - brainly.com/question/31545539
#SPJ11
The following reaction forms 15.9 g of Ag(s): 2Ag2O(s)→4Ag(s)+O2(g) What total volume of gas forms if it is collected over water at a temperature of 25 ∘C and a total pressure of 756 mmHg ?
To answer this question, we need to use the combined gas law equation, which relates the pressure, volume, and temperature of a gas. We also need to use the molar volume of a gas at standard temperature and pressure (STP), which is 22.4 L/mol.
First, let's calculate the number of moles of O2 gas produced in the reaction:
2Ag2O(s) → 4Ag(s) + O2(g)
1 mole of Ag2O produces 1/2 mole of O2 gas, so:
n(O2) = 1/2 * (15.9 g / 231.74 g/mol) = 0.034 mol
Next, let's use the ideal gas law to calculate the volume of O2 gas at STP:
PV = nRT
where P = pressure, V = volume, n = number of moles, R = gas constant, and T = temperature
At STP, P = 1 atm and T = 273 K. Rearranging the equation, we get:
V = nRT/P = (0.034 mol)(0.0821 L·atm/mol·K)(273 K)/(1 atm) = 0.76 L
This is the volume of O2 gas that would be produced if it were collected at STP. However, the question asks for the volume at a different temperature and pressure.
To adjust for the temperature and pressure, we can use the combined gas law:
(P1V1)/T1 = (P2V2)/T
where P1 = initial pressure, V1 = initial volume, T1 = initial temperature, P2 = final pressure, V2 = final volume, and T2 = final temperature.
We know that the initial volume (V1) is equal to the volume at STP (0.76 L), and the initial temperature (T1) is 273 K. We also know the final pressure (P2) is 756 mmHg. We need to solve for the final volume (V2).
Plugging in the values and solving for V2, we get:
V2 = (P1V1T2)/(T1P2) = (1 atm)(0.76 L)(298 K)/(273 K)(756 mmHg) = 0.671 L
Therefore, the total volume of gas that forms if it is collected over water at a temperature of 25 ∘C and a total pressure of 756 mmHg is 0.671 L.
Learn more about molar here:
https://brainly.com/question/31545539
#SPJ11
the maximum amount of manganese(ii) hydroxide that will dissolve in a 0.117 m manganese(ii) nitrate solution is
The maximum amount of manganese(ii) hydroxide that will dissolve in a 0.117 m manganese(ii) nitrate solution is 2.15 x 10^-12 moles.
The solubility of manganese(ii) hydroxide in a 0.117 m manganese(ii) nitrate solution can be determined using the solubility product constant (Ksp) of manganese(ii) hydroxide. The Ksp of manganese(ii) hydroxide is 2.45 x 10^-13.
To find the maximum amount of manganese(ii) hydroxide that will dissolve in the solution, we need to calculate the ion product (Q) of manganese(ii) hydroxide in the solution. The Q value is obtained by multiplying the concentrations of the ions present in the solution.
Manganese(ii) nitrate dissociates in water to form Mn2+ and NO3- ions. Thus, the concentration of Mn2+ ions in the solution is 0.117 m. Manganese(ii) hydroxide dissolves in water to form Mn(OH)2 and releases two Mn2+ ions and two OH- ions. Therefore, the concentration of Mn2+ ions in the solution is doubled, i.e., 0.234 m, and the concentration of OH- ions is also 0.234 m.
Using these concentrations, we can calculate the ion product (Q) of manganese(ii) hydroxide as follows:
Q = [Mn2+]^2[OH-]^2
Q = (0.234)^2(0.234)^2
Q = 0.0037
Since the Q value is less than the Ksp value of manganese(ii) hydroxide, the solution is not saturated and more manganese(ii) hydroxide can dissolve in the solution. However, to find the maximum amount that will dissolve, we need to use the Ksp value.
The Ksp expression for manganese(ii) hydroxide is given as:
Ksp = [Mn2+][OH-]^2
Rearranging the expression, we get:
[Mn2+] = Ksp/[OH-]^2
[Mn2+] = (2.45 x 10^-13)/(0.234)^2
[Mn2+] = 4.29 x 10^-12
This is the maximum amount of Mn2+ ions that can be present in the solution. Since each mole of manganese(ii) hydroxide releases two moles of Mn2+ ions, the maximum amount of manganese(ii) hydroxide that will dissolve in the solution is calculated as:
(4.29 x 10^-12)/2 = 2.15 x 10^-12 moles
In conclusion, the maximum amount of manganese(ii) hydroxide that will dissolve in a 0.117 m manganese(ii) nitrate solution is 2.15 x 10^-12 moles.
To know more about manganese visit :
https://brainly.com/question/18872009
#SPJ11
Determine the pH of a 0. 580 M KCH3CO2 solution at 25°C. The Ka of CH3CO2H is 1. 80 × 10^-5. A) 9. 25
B) 4. 75
C) 7. 00
D) 12. 5
E) 1. 47
The given problem involves calculating the pH of a 0.580 M KCH3CO2 solution at 25°C using the given Ka value of CH3CO2H.
The chemical equation for the dissociation of CH3CO2H in water is as follows:
CH3CO2H + H2O ⇌ CH3CO2- + H3O+
The expression for the equilibrium constant (Ka) is given as:
Ka = [CH3CO2-][H3O+] / [CH3CO2H]
Since the acid is weak, we can assume that [H3O+] is approximately equal to [CH3CO2-]. Therefore, the above equation can be simplified as:
Ka = [CH3CO2-]^2 / [CH3CO2H]
We can now use the given Ka value to calculate the concentration of [H3O+] using the ICE table.
Initial: CH3CO2H + H2O ⇌ CH3CO2- + H3O+
0.580 M + 0 M ⇌ 0 M + 0 M
Change: -x + x + x + x
Equilibrium: 0.580 - x + x ⇌ x + x
Using the Ka expression and the equilibrium concentrations, we get:
1.80 x 10^-5 = x^2 / (0.580 - x)
Assuming x is negligible compared to 0.580, we can simplify the equation as:
1.80 x 10^-5 = x^2 / 0.580
Solving for x, we get:
x = 0.0021 M
The pH of the solution can now be calculated using the formula:
pH = -log[H3O+]
pH = -log(0.0021)
pH = 2.68
Therefore, the pH of the 0.580 M KCH3CO2 solution at 25°C is 2.68.
Learn more about pH here:brainly.com/question/2288405
#SPJ11
1.41 mol of an ideal gas in a piston-cylinder initially occupies 7.8 L at 313 oC and constant pressure. 1) Suppose the temperature increases to 386 oC. Calculate the work (in J) done on or by the gas. Express your answer using 3 significant figures. 2)Calculate the heat flow in J. Express your answer using 3 significant figures.
The work done by the gas is -1.01 × 10^5 J and the heat flow is 2.96 × 10⁴ J.
The given information allows us to use the formula PV=nRT, where P is the pressure, V is the volume, n is the number of moles of the gas, R is the gas constant, and T is the temperature in Kelvin.
Using this formula, we can calculate that the number of moles of gas in the cylinder is 1.41 mol. 1)
If the temperature increases to 386 oC, we can use the formula w = -PΔV to calculate the work done by the gas.
Here, ΔV = Vf - Vi, where Vf is the final volume and Vi is the initial volume.
Rearranging the formula, we get w = -P(Vf - Vi).
Substituting the given values, we get w = -1.01 × 10⁵ J. 2)
To calculate the heat flow, we can use the formula Q = nCΔT, where C is the molar heat capacity at constant pressure. At constant pressure, C = Cp = 5/2R.
Substituting the given values, we get Q = 2.96 × 10⁴ J.
Learn more about work done at https://brainly.com/question/31655489
#SPJ11
calculate the mass percent of a solution that is prepared by adding 27.5 g of naoh to 479 g of h2o.
The mass percent of the solution is 5.43%.
It can be calculated by dividing the mass of the solute (NaOH) by the mass of the solution (NaOH + H₂O) and multiplying by 100.
The mass of the solution is the sum of the mass of the solute (NaOH) and the solvent (H₂O).
Mass of NaOH = 27.5 g
Mass of H₂O = 479 g
Mass of solution = Mass of NaOH + Mass of H₂O
= 27.5 g + 479 g
= 506.5 g
Now, we can calculate the mass percent of the solution:
Mass percent = (Mass of NaOH / Mass of solution) x 100%
= (27.5 g / 506.5 g) x 100%
= 5.43%
Therefore, the mass percent of the solution is 5.43%.
To know more about mass refer here:
https://brainly.com/question/15959704#
#SPJ11
23700 J of heat are added to a 98. 7 g sample of copper at 22. 7 °C. What is the final temperature of the copper?
The specific heat of copper is 0. 385 J/g°C
23700 J of heat are added to a 98. 7 g sample of copper at 22. 7 °C. The final temperature of the copper sample after adding 23700 J of heat is approximately 84.752°C.
To determine the final temperature of the copper sample after adding 23700 J of heat, we can use the equation Q = m * c * ΔT, where Q represents the heat added, m is the mass of the copper, c is the specific heat capacity of copper, and ΔT is the change in temperature.
First, we need to calculate the heat capacity of the copper sample. Using the formula Q = m * c * ΔT, we rearrange the equation to solve for ΔT: ΔT = Q / (m * c).
Substituting the given values into the equation: ΔT = 23700 J / (98.7 g * 0.385 J/g°C).
By calculating the right side of the equation, we find ΔT ≈ 62.052°C.
Since the initial temperature of the copper sample is 22.7°C, we can calculate the final temperature by adding ΔT to the initial temperature: final temperature = 22.7°C + 62.052°C.
The final temperature of the copper sample after adding 23700 J of heat is approximately 84.752°C.
This calculation demonstrates the relationship between heat transfer, mass, specific heat capacity, and temperature change in determining the final temperature of a substance.
Learn more about heat capacity here:
https://brainly.com/question/28302909
#SPJ11
how many rings are present in c12h22n2? this compound consumes 2 mol of h2 on catalytic hydrogenation. enter your answer in the provided box.
Since there are two double bonds or rings, and the compound has three degrees of unsaturation, it indicates that there is one ring present in the compound C12H22N2.
The molecular formula for the compound is C12H22N2. Since the compound consumes 2 moles of H2 on catalytic hydrogenation, it suggests the presence of two double bonds or rings. To determine the number of rings, we can apply the degree of unsaturation formula, which is: (2C + 2 + N - H) / 2, where C is the number of carbons, N is the number of nitrogens, and H is the number of hydrogens.
Plugging in the values, we get: (2*12 + 2 + 2 - 22) / 2 = (24 + 2 + 2 - 22) / 2 = 6 / 2 = 3. Therefore, there are three degrees of unsaturation in the compound.
To know more about double bonds visit:
https://brainly.com/question/31535069
#SPJ11
Calculation of Calories per Gram in Food Samples Table view List view Calculation of Calories per Mass of Food Quantity 12,609 105.027 1.856 Mass of can (9) Mass of can and water (a) Initial mass of food sample (g) Final mass of food sample (9) Initial temperature of water (C) Final temperature of water (C) 0.450 22.5 24.9 Mass of water (0) Temperature change of water (C) (Do not include a negative sign) Heat gained by water (cal) (Do not include a negative sign) Heat gained by water (kcal) (Do not include a negative signi) Heat lost by food (cal) Heat lost by food (kcal) (Do not include a negative sign) Mass of food burned (9) Calories per gram of food (kcal/g)
Calories per gram in food samples can be calculated by measuring the heat gained by the water and lost by the food during combustion. To do this, we need to know the initial and final masses of the food sample, the initial and final temperatures of the water, and the mass of the can and water.
Once we have these measurements, we can use the formula Q = mcΔT, where Q is the heat gained or lost, m is the mass, c is the specific heat capacity of water (4.184 J/g°C), and ΔT is the change in temperature.
First, we calculate the heat gained by the water by multiplying the mass of water by the specific heat capacity of water and the temperature change. Then, we divide by 1000 to convert from joules to kilocalories.
Next, we calculate the heat lost by the food by subtracting the heat gained by the water from the total heat generated during combustion. We also divide this by 1000 to convert from joules to kilocalories.
Finally, we divide the mass of food burned by the total number of kilocalories generated to get the calories per gram of food. This calculation gives us an idea of the energy density of the food sample, which is important for understanding how much energy we are consuming when we eat.
Learn more about combustion here :
https://brainly.com/question/17058179
#SPJ11
Define oxidation and reduction. In the electrochemical cells that you built, which process (oxidation or reduction) occurs at the anode? At the cathode? Explain.
(Electrochemical cells that I built:
Tin sulfate with copper gluconate using KCl strip to show voltage.
Aluminum sulfate with copper gluconate using KCl strip to show voltage.
Ferrous sulfate with copper gluconate using KCl strip to show voltage.
Zinc sulfate with copper gluconate using KCI strip to show voltage.)
Oxidation is a chemical process in which a substance loses electrons, leading to an increase in its oxidation state. Where reduction is a chemical process in which a substance gains electrons, resulting in a decrease in its oxidation state.
In the electrochemical cells, oxidation occurs at the anode, while reduction occurs at the cathode.
This is because the anode serves as the site where the loss of electrons takes place, whereas the cathode is where the gain of electrons occurs.
In your specific experiments with tin sulfate, aluminum sulfate, ferrous sulfate, and zinc sulfate paired with copper gluconate using KCl strips to show voltage, the metal in each sulfate solution would be oxidized at the anode, and copper in the copper gluconate solution would be reduced at the cathode.
Read more about Oxidation and reduction.
https://brainly.com/question/29850703
#SPJ11
how many kilojoules of heat are produced by the combustion of 75.00g of carbon monoxide?
The combustion of 75.00g of carbon monoxide produces approximately 758.11 kJ of heat.
To calculate the heat produced by the combustion of 75.00g of carbon monoxide, we need to know the heat of combustion of carbon monoxide (∆H_comb) and apply the stoichiometry of the reaction.
Carbon monoxide (CO) combusts with oxygen (O₂) to form carbon dioxide (CO₂). The balanced chemical equation is:
2CO + O₂ → 2CO₂
The heat of combustion of carbon monoxide is approximately -282.96 kJ/mol.
First, determine the number of moles of carbon monoxide in 75.00g. The molar mass of CO is approximately 28.01g/mol.
moles of CO = mass / molar mass = 75.00g / 28.01g/mol = 2.678 mol
Since 2 moles of CO produce 2 moles of CO₂, the stoichiometry is a 1:1 ratio. Therefore, 2.678 mol of CO will produce 2.678 mol of CO₂.
Now, use the heat of combustion to find the heat produced:
heat produced = moles of CO × ∆H_comb = 2.678 mol × -282.96 kJ/mol = -758.11 kJ
Thus, the combustion of 75.00g of carbon monoxide produces approximately 758.11 kJ of heat.
Know more about Combustion here:
https://brainly.com/question/13153771
#SPJ11
analyze h−c≡c−cooh for functional groups that will give bands in an ir spectrum. which absorption band(s) would you expect to see in the ir spectrum?1600 cm^-12500-3300 cm^-1 3300 cm^-11800 cm^-1
Functional groups present in the molecule h−c≡c−cooh that will give bands in an IR spectrum are C≡C (triple bond), C=O (carbonyl), and O-H (hydroxyl). T
he absorption bands expected in the IR spectrum are: a sharp peak at around 3300 cm^-1 due to the O-H stretch, a strong peak around 2100-2260 cm^-1 due to the C≡C stretch, and a sharp peak around 1710-1750 cm^-1 due to the C=O stretch.
The IR spectrum is used to identify functional groups present in a molecule. In the given molecule h−c≡c−cooh, there are three functional groups that will give characteristic peaks in the IR spectrum: C≡C (triple bond), C=O (carbonyl), and O-H (hydroxyl). The O-H stretch will appear as a sharp peak at around 3300 cm^-1, the C≡C stretch will appear as a strong peak around 2100-2260 cm^-1, and the C=O stretch will appear as a sharp peak around 1710-1750 cm^-1. Therefore, the IR spectrum of h−c≡c−cooh is expected to show these absorption bands.
Learn more about molecule here :
https://brainly.com/question/19556990
#SPJ11
You need 70. 2J to raise the temperature of an unknown mass of ammonia, NH3(g) from 23. 0 C to 24. 0 C. If the specific heat of ammonia is 2. 09J/(g×K), calculate the unknown mass of ammonia
To calculate the unknown mass of ammonia, we can use the formula for heat: Q = m * c * ΔT.
Where:
Q is the heat energy in Joules,
m is the mass of the substance in grams,
c is the specific heat capacity in J/(g*K), and
ΔT is the change in temperature in degrees Celsius.
In this case, we know the heat energy (Q) is 70.2 J, the specific heat capacity (c) is 2.09 J/(g*K), and the change in temperature (ΔT) is 1 degree Celsius (24.0°C - 23.0°C = 1°C).
Substituting these values into the formula, we can solve for the mass (m):
70.2 J = m * 2.09 J/(g*K) * 1°C
Simplifying the units, we have:
70.2 J = m * 2.09 J/(g*K) * 1
To solve for mass (m), we divide both sides of the equation by 2.09 J/(g*K):
m = 70.2 J / (2.09 J/(g*K))
m = 33.49 g
Therefore, the unknown mass of ammonia is approximately 33.49 grams.
Learn more about mass of ammonia here
https://brainly.com/question/29544352
#SPJ11
true or false:the net ionic equation for the reaction that occurs when a small amount of nitric acid is added to a nano2/hno2 buffer is h no2– rightwards arrow hno2
The net ionic equation for the reaction that occurs when a small amount of nitric acid is added to a nano₂/hno₂ buffer is HNO₂ -> NO₂ is True.
When a small amount of nitric acid (HNO₃) is added to a NaNO₂/HNO₂ buffer solution, the following reaction occurs:
HNO₃ + HNO₂ ⇌ NO₂+ + H₂O + HNO₂
The net ionic equation for this reaction is:
H+ + NO₂- ⇌ HNO₂
In this reaction, the HNO₂ acts as a buffer and resists changes in pH when an acid or base is added. The HNO₃ reacts with the HNO₂ to form NO₂+ and H₂O, which then react with the excess HNO₂ to form H+ and HNO₂. The H+ ions combine with the NO₂- ions from the buffer to form HNO₂, which maintains the pH of the solution.
Therefore, the net ionic equation for the reaction that occurs when a small amount of nitric acid is added to a NaNO₂/HNO₂ buffer is H+ + NO₂- ⇌ HNO₂.
learn more about nitric here:
https://brainly.com/question/31605215
#SPJ11
Mg(oh)2 has a ksp = 1.2 × 10^-11 . what is the chemical reaction? find the molar solubility of mg(oh)2 .
The chemical reaction for Mg(OH)2 is: Mg(OH)2 (s) ⇌ Mg2+ (aq) + 2OH- (aq). The molar solubility of Mg(OH)2 is approximately 1.44 × 10^-4 M.
The solubility product constant (Ksp) is an equilibrium constant that relates to the dissolution of a sparingly soluble salt in water. In this problem, we were given the Ksp value for magnesium hydroxide (Mg(OH)2), which is a sparingly soluble salt that partially dissociates into magnesium ions (Mg2+) and hydroxide ions (OH-) in water.
Given the Ksp value of 1.2 × 10^-11, we can determine the molar solubility. Let's denote the molar solubility as "x."
Ksp = [Mg²⁺][OH⁻]^2 Since the stoichiometry is 1:2, the concentration of OH⁻ ions will be twice that of Mg²⁺ ions. Thus, we can express the Ksp in terms of x: 1.2 × 10^-11 = [x][2x]^2 Solve for x to find the molar solubility of Mg(OH)2:
1.2 × 10^-11 = 4x^3
x ≈ 1.44 × 10^-4 M
To know more about solubility visit :-
https://brainly.com/question/30639017
#SPJ11
Place the following compounds in order.
CH3CH2CH3 CH3CH2OH CH3CH3 NaCl
A B C D
(Enter the letter corresponding to each compound.)
a. lowest to highest boiling point:
lowest = < < < = highest
b. lowest to greatest vapor pressure:
lowest = < < < = greatest
a. The order from lowest to highest boiling point is: C (CH3CH3) < A (CH3CH2CH3) < B (CH3CH2OH) < D (NaCl). This is because boiling point increases with increasing molecular weight and intermolecular forces.
NaCl has the highest boiling point because it is an ionic compound with strong electrostatic interactions between its ions. CH3CH2OH has the next highest boiling point because it can form hydrogen bonds between its molecules, which are stronger than the London dispersion forces in CH3CH2CH3 and CH3CH3.
b. The order from lowest to greatest vapor pressure is: D (NaCl) < B (CH3CH2OH) < A (CH3CH2CH3) < C (CH3CH3). This is because vapor pressure decreases with increasing intermolecular forces and increasing boiling point. NaCl has the lowest vapor pressure because it is a solid and does not have molecules that can escape into the gas phase. CH3CH2OH has the next lowest vapor pressure because its hydrogen bonds make it more difficult for molecules to escape into the gas phase. CH3CH2CH3 and CH3CH3 have weaker intermolecular forces and lower boiling points, so they have higher vapor pressures.
a. Lowest to highest boiling point:
lowest = C (CH3CH3) < A (CH3CH2CH3) < B (CH3CH2OH) < D (NaCl) = highest
b. Lowest to greatest vapor pressure:
lowest = D (NaCl) < B (CH3CH2OH) < A (CH3CH2CH3) < C (CH3CH3) = greatest
To know about boiling visit:
https://brainly.com/question/29319965
#SPJ11
Complete and balance these equations to show how each element reacts with hydrochloric acid. Include phase symbols. reaction a: Mg(8)+HCl(aq) reaction b: Zn(s)+HCl(aq)
The balanced reaction A is: Mg(s) + 2HCl(aq) → MgCl2(aq) + H2(g) and The balanced reaction B is: Zn(s) + 2HCl(aq) → ZnCl2(aq) + H2(g)
For reaction a:
Mg(s) + 2HCl(aq) → MgCl2(aq) + H2(g)
This reaction involves magnesium (Mg) reacting with hydrochloric acid (HCl) to produce magnesium chloride (MgCl2) and hydrogen gas (H2).
For reaction b:
Zn(s) + 2HCl(aq) → ZnCl2(aq) + H2(g)
This reaction involves zinc (Zn) reacting with hydrochloric acid (HCl) to produce zinc chloride (ZnCl2) and hydrogen gas (H2).
Here is a detailed and step-by-step explanation for completing and balancing the reactions of Mg and Zn with hydrochloric acid, including phase symbols.
Reaction A: Mg(s) + HCl(aq)
1. Write the unbalanced equation with products: Mg(s) + HCl(aq) → MgCl2(aq) + H2(g)
2. Balance the equation: Mg(s) + 2HCl(aq) → MgCl2(aq) + H2(g)
The balanced reaction A is: Mg(s) + 2HCl(aq) → MgCl2(aq) + H2(g)
Reaction B: Zn(s) + HCl(aq)
1. Write the unbalanced equation with products: Zn(s) + HCl(aq) → ZnCl2(aq) + H2(g)
2. Balance the equation: Zn(s) + 2HCl(aq) → ZnCl2(aq) + H2(g)
The balanced reaction B is: Zn(s) + 2HCl(aq) → ZnCl2(aq) + H2(g)
Learn more about hydrochloric acid
https://brainly.com/question/15231576
#SPJ11
For the reaction mechanism of Fisher esterification reaction, what acts as the nucleophile (:Nu"), and what acts as the electrophile (E)? Nu - isoamyl alcohol, E-acetic acid Nu-sulphuric acid, E-acetate Nu-isoamyl alcohol, E-acetic acid (protonated form) Nu - acetic acid, E = isoamyl acetate Nu sulphuric acid, E-acetic acid
In the Fisher esterification reaction mechanism, the nucleophile (:Nu) is the isoamyl alcohol (Nu-isoamyl alcohol) and the electrophile (E) is the protonated form of acetic acid (E-acetic acid).
The Fischer esterification reaction is a chemical reaction that involves the formation of an ester from a carboxylic acid and an alcohol, with the elimination of water. The reaction is catalyzed by an acid catalyst, such as concentrated sulfuric acid or hydrochloric acid.The general reaction equation for Fischer esterification is as follows:
Carboxylic acid + Alcohol ⇌ Ester + Water
The reaction involves the transfer of a proton from the carboxylic acid (E-acetic acid) to the alcohol (Nu-isoamyl alcohol) to form a reactive intermediate, which then undergoes a nucleophilic attack by the alcohol (Nu-isoamyl alcohol) to form the ester product. Sulphuric acid may be added as a catalyst to facilitate the proton transfer step, but it is not directly involved in the reaction as a nucleophile or electrophile.
To know more about Fisher esterification reaction : https://brainly.com/question/24063618
#SPJ11