Answer:
The answer is 3.44 g/cm³Explanation:
The density of a substance can be found by using the formula
[tex]density = \frac{mass}{volume} \\[/tex]
From the question
mass = 17.2 g
volume = 5 cm³
We have
[tex]density = \frac{17.2}{5} \\ [/tex]
We have the final answer as
3.44 g/cm³Hope this helps you
what is displacement give two examples
Explanation:
nothing it is just a question. you should know the answer . example:you,
The closeness of particles of gas and their low speeds allow intermolecular forces to become important at certain
pressures and temperatures. Which best describes this statement?
Answer:
This is a limitation of the kinetic-molecular theory.
Explanation:
Investigating physical and chemical changes takes a plan. Which of the following
are part of planning? Select all that apply.
A. knowing the results of the investigation
B. listing the materials and tools that are needed
C. filling out a data table with the results
D. writing down the procedure for the investigation
E. making sense of what happened to explain it
Answer:
D e
Explanation:
Calculate the number of total atoms in 195 grams of Ni(OH)2. Use 6.022x10^23mol-1 for Avogadro’a number
195 g×
1 mol
Ni(OH)
2
92.71
g Ni(OH)
2
×
6.022×
10
23
formula units
mol
=1.27×
10
24
formula units of Ni(OH)
2
Since there are
5
atoms—one
Ni
atom, two atoms of
O
and two atoms of
H
—in each formula unit of
Ni(OH)
2
,
we multiply the number of formula units calculated above by
5
:
1.27×
10
24
formula units of Ni(OH)
2
×
5 atoms
formula unit of Ni(OH)
2
=6.33× 10^ 24 total atoms
The number of total atoms in 195 grams of [tex]Ni(OH)_2[/tex] is[tex]6.30\times 10^{24}[/tex] atoms
Explanation:
Given:
The 195 grams of nickel(II) hydroxide,[tex]Ni(OH)_2[/tex] .
To find:
The total number of atoms in 105 grams of nickel(II) hydroxide.
Solution:
The mass of nickel(II) hydroxide = 195 g
The molar mass of nickel(II) hydroxide = 92.708 g/mol
The moles of nickel(II) hydroxide:
[tex]=\frac{195 g}{92.708 g/mol}=2.10 mol[/tex]
According to the mole concept:
1 mole =[tex]N_A=6.022\times 10^{23} mol^{-1}[/tex]
The number of molecules of nickel(II) hydroxide =
[tex]N=2.10 mol\times 6.022\times 10^{23} mol^{-1} =1.26\times 10^{24} molecules[/tex]
In 1 molecule of nickel(II) hydroxide there is 1 nickel atom, then in N molecules of nickel(II) hydroxide:
[tex]=1\times 1.26\times 10^{24} atom=1.26\times 10^{24} atoms[/tex]
In 1 molecule of nickel(II) hydroxide there are 2 oxygen atoms, then in N molecules of nickel(II) hydroxide:
[tex]=2\times 1.26\times 10^{24} atom=2.52\times 10^{24} atoms[/tex]
In 1 molecule of nickel(II) hydroxide there are 2 hydrogen atoms, then in N molecules of nickel(II) hydroxide:
[tex]=2\times 1.26\times 10^{24} atom=2.52\times 10^{24} atoms[/tex]
The total number of atoms:
[tex]=1.26\times 10^{24} atoms+2.52\times 10^{24} atoms+2.52\times 10^{24} atoms=6.30\times 10^{24} atoms[/tex]
The number of total atoms in 195 grams of [tex]Ni(OH)_2[/tex] is[tex]6.30\times 10^{24}[/tex] atoms.
Learn more about the mole concept here:
brainly.com/question/10165629?referrer=searchResults
brainly.com/question/13314627?referrer=searchResults
Insoluble molecular compounds break apart into atoms when added to water.
True
O False
Answer:
False.
This is false because, no chemical reaction could possibly happen.
But in case of sodium it is highly reactive with water.......... so there will be a chemical reaction.
but as sodium is not a insoluble molecular compound this is not applicable to the situation.
The reaction between ethylene and hydrogen bromide to form ethyl bromide is carried out in a continuous reactor. The product stream is analyzed and found to contain 56.7 mol% C2H5Br and 10.3 mol% HBr. The feed to the reactor conains only ethylene and hydrogen bromide. Calculate the fractional conversion of the limiting reactant and the percentage by which the other reactant is in excess. If the molar flow rate of the feed stream is 265 mol/s, what is the extent of reaction
Answer:
Extent of reaction = 95.9 mol.
Fractional conversion of the limiting reactant = 0.846.
Percentage by which the other reactant is in excess = 25.2 %.
Explanation:
Hello.
In this case, for the undergoing chemical reaction:
[tex]CH_2=CH_2+HBr\rightarrow CH_3-CH_2Br[/tex]
We can write the mole balance per species also including the extent of the reaction:
[tex]CH_2=CH_2:A\\\\HBr: B\\\\CH_3-CH_2-Br:C[/tex]
[tex]x_AP=z_AF-\epsilon \\\\x_BP=z_BF-\epsilon \\\\x_CP=\epsilon[/tex]
Considering that P is the flow of the outlet product. In such a way, writing the data we know, we can write:
[tex]0.33P=z_A*265-\epsilon \\\\0.103P=z_B*265-\epsilon \\\\0.567P=\epsilon[/tex]
Whereas we can replace the C2H5Br mole balance in the others mole balances:
[tex]0.33P=z_A*265-0.567P \\\\0.103P=z_B*265-0.567P\\\\\\z_A*265-0.897P=0\\\\z_B*265-0.67P=0[/tex]
By knowing that [tex]z_B=1-z_A[/tex], we can write:
[tex]z_A*265-0.897P=0\\\\(1-z_A)*265-0.67P=0\\\\\\z_A*265-0.897P=0\\\\-z_A*265-0.67P=-265[/tex]
Thus, solving for P and [tex]z_A[/tex], we obtain:
[tex]z_A=0.572\\\\P=169.11mol[/tex]
It means that the extent of the reaction is:
[tex]\epsilon=0.567P=0.567*169.11mol\\\\\epsilon=95.9mol[/tex]
For the limiting reactant, due to the 1:1 mole ratio between the reactants, it is the one having the smallest flow rate:
[tex]F_A=0.572*265mol=151.58mol\\\\F_B=265mol-151.58mol=113.42mol[/tex]
It means that the limiting reactant is B which is HBr, whose fractional conversion is:
[tex]X_B=1-\frac{0.103*169.11}{113.42mol}\\ \\X_B=0.846[/tex]
Finally, the percentage by which the other reactant is in excess, corresponds to:
[tex]\% excess =(1-\frac{113.42mol}{151.58mol})*100\%\\ \\\%excess=25.2\%[/tex]
Regards.
Convert 9.13 decigram into milligram
Answer:
(9.13)
multiply the mass value by 100
=913 milligrams
Answer:
913 mg
Explanation:
913
The density of aluminum is 2.7 g/cm3. A metal sample has a mass of 52.0 grams and a volume of 17.1 cubic centimeters. Could the sample be aluminum? EXPLAIN your answer.
Answer:
The given metal sample is not aluminum because its density is 3.0 g/cm³ while density of aluminum is 2.7 g/cm³.
Explanation:
Given data:
Density of aluminum = 2.7 g/cm³
Mass of metal sample = 52.0 g
Volume of metal sample = 17.1 cm³
which sample is that = ?
Solution:
The given problem will be solve through density formula.
d = m/v
d = density
m = mass
v= volume
Now we will put the values in formula.
d = 52.0 g/ 17.1 cm³
d = 3.0 g/cm³
It is given in question the density of aluminum is 2.7 g/cm³. The given metal sample is not aluminum because its density is 3.0 g/cm³.
Ernest Rutherford and Henry
Moseley used this subatomic
particle to differentiate atoms by
their atomic number.
Answer:
electron
Explanation:
Chemistry
H
D
G
A
S
F
F
F
G
Vv
F
F
F
F
F
Answer:
i think its f because my teacher have been talking about this
Explanation:
Answer:
f
Explanation:
Which factor is most important to consider when evaluating a journal article about global warming? Is the article long enough? Does the article contain facts or only opinions? Did the author of the article use complex, scientific words? Does the author of the article have a doctorate degree?
Answer:
Does the article contain facts or only opinions
Got it right on edg.
Answer:
B) Does the article contain facts or only opinions?
Explanation:
which surface events are examples of weathering
Answer:Weathering Erosion & Deposition
Changes in shape, size, and texture of land-forms (i.e. mountains, riverbeds, and beaches)
Landslides.
Buildings, statues, and roads wearing away.
Soil formation.
Washes soil, pollutants, harmful sediments into waterways.
Causes metals to rust.
Reduces beaches, shorelines.
Delta formation.
Explanation:
Imagine you are a lab technician, and a colleague informs you there have been problems with the 25.0-mL samples you have been providing. You know you have been measuring the volume carefully and reading the meniscus correctly, so you decide to check the calibration of the graduated cylinder you have been using. You fill the graduated cylinder with water at 25 °C up to the 25.0 mL mark, and then measure the mass of this volume of water. You find that the mass is 22.4 g. The density of water at 25 °C is 0.99704 g/mL. What is the actual volume of the water?
Answer:
22.5mL is the volume of the water
Explanation:
When the graduated cylinder is in the 25.0mL mark, the mass of this volume is 22.4g. To convert this mass to volume we need to use density, as follows:
22.4g × (1mL / 0.99704g) = 22.5mL is the volume of the water.
That means the cylinder is uncalibrated in 2.5mL when the cylinder is in the 25.0mL mark
The measurement 0.003095 gram, rounded to three significant figures, is
expressed as
0.00310
0.00309
0.003
0.003096
Answer:
0.00310
Explanation:
What is a faze of matter
Answer:
solider liquid and gas plasma
Explanation:
in physical a state of matter is one of the distant form in which matter can exist four states of matter are observable in everyday life solid liquid and gas and plasma. hope it helps
In physics, a state of matter is one of the distinct forms in which matter can exist. Four states of matter are observable in everyday life: solid, liquid, gas, and plasma.
Which statement best describes how an ionic bond forms?
what do you mean by the region or space that an electron revolves the nucleus in an atom?
An atomic orbital is a mathematical feature describing the region and wave-like behavior of an electron in an atom. This characteristic can be used to calculate the opportunity of finding any electron of an atom in any precise location across the atom's nucleus.
What's the vicinity of space in which there's a high opportunity of locating an electron?An atomic orbital is regularly idea of as a location of space wherein there is an excessive opportunity of finding an electron. Every energy level corresponds to an orbital of a one-of-a-kind form, which describes wherein the electron is probable to be observed.
Learn more about atomic orbital here: https://brainly.com/question/20319149
#SPJ2
Which of these is the smallest?
cells
atoms
molecules
cell membranes
Science 7th grade
Answer: atoms
Explanation: cell membrane is in a cell
A student puts a piece of ice into a beaker of cold water. Which two Statements are true ?A. Thermal energy will move from air to the water. B. Thermal energy will move from the water to the ice. C.Thermal energy will move from the ice to the air . D. Thermal energy will move from the water to the air.
Answer:
C.Thermal energy will move from the ice to the air.
Explanation:
The energy that is associate with the random movement of particles is called thermal energy. The water has a specific heat that is the energy that is needed to raise one gram of a substance to one degree Celsius as water can absorb a large amount of energy and produce a small number of changes the option C.Methylene Chloride (MC) is a common ingredient of paint removers. Besides being an irritant, it also may be absorbed through skin. When using this paint remover chemical protective clothing should be worn. If thick butyl rubber gloves (0.1 cm thick) are used, D in butyl rubber is 110 x 10-8 cm2/s, and surface concentrations are 0.44, and 0.02 g/cm3. If the surface of a glove is 50 cm2, the amount of MC transported through the glove in 3 hours will be: Answer in grams (g).
Answer:
2.5 g
Explanation:
First we have to calculate the diffusion flux (J). To calculate, we use the formula:
[tex]J=-D\frac{dC}{dx}=-D\frac{C_2-C_1}{x_2-x_1}\\ \\Given\ that:\\\\x_2-x_1=0.1\ cm,D=110*10^{-8}cm^2/s,C_2=0.02g/cm^3,C_1=0.44g/cm^3\\\\Substituting:\\\\J=-110*10^{-8}(\frac{0.02-0.44}{0.1} )=4.62*10^{-6}g/cm^2s\\\\But, J=\frac{M}{At}\\ \\t=3\ hours=10800\ s,A=50\ cm^2\\\\Substituting:\\\\4.62*10^{-6}=\frac{M}{50*10800}\\ \\M=4.62*10^{-6}*50*10800\\\\M=2.5\ g[/tex]
Which property is not a physical property?
A. Color
B. Ability to Burn
C. Density
D. Melting Point
Answer: Ability to Burn
Explanation: I TOOK THE TEST
What is the concentration of a dextrose solution prepared by diluting 15 mL of a 1.0 M dextrose solution to 25 mL using a 25 mL volumetric flask
Answer:
C₂ = 0.60 M
Explanation:
Step 1: Given data
Concentration of the concentrated solution (C₁): 1.0 MVolume of the concentrated solution (V₁): 15 mLConcentration of the diluted solution (C₂): ?Volume of the diluted solution (V₂): 25 mLStep 2: Calculate the concentration of the diluted dextrose solution
We will use the dilution rule.
C₁ × V₁ = C₂ × V₂
C₂ = C₁ × V₁ / V₂
C₂ = 1.0 M × 15 mL / 25 mL
C₂ = 0.60 M
It is expected that as the temperature goes up by the above method, frozen carbon dioxide will defrost and evaporate into the atmosphere, raising temperatures even more. Why would this be
Answer:
CO2 is a green house gas
Explanation:
CO2 is believed to act as a canopy over the earth's surface absorbing infrared (heat ray) from the earth and re-emitting it back to the earth.
By so doing, temperature is increased and more frozen CO2 will defrost causing even greater temperature rise.
The gradual rise in the earth's temperature is known as global warming.
a jaguar can run up to 50 miles per hour, how many feet can he run per second? give your answer in scientific notation to one and three significant figures.
Answer:
50x10^0
Explanation:
How many oxygen atoms are in 8.20 g Na 2SO 4?
Answer:
No. of atom =
no.of moles x avagardro's number xatomicity
= weight /molar mass x No x atomicity
=8.2/142 x6.02x10^23 x 4
=0.346 x 10^23(approximately)
Question 10
Which of the following is a the correct formula for 2 atoms SHARING electrons?
A. F2
B. NaCl
C.KBr
D. CaCl2
Answer:
b
Explanation:
jus bc
Fluorine F₂ is the correct formula for two atoms in sharing of electrons as they have covalent bond among them. Therefore, option (A) is correct.
What is a covalent bond?A covalent bond is created through sharing of electrons between different or the same kinds is known as a covalent Bond.
A covalent bond has equal sharing of electrons among bonded atoms. The pair of electrons which is shared between atoms is known as shared pair.
Sharing of electrons will help atoms to attain stability in their valence shell as noble gases. Atoms share their electrons with the other atoms in a way so that both atoms can gain octet configuration in their valence shell.
The bond between two fluorine atoms is a covalent bond formed by sharing of electrons. The Bond between sodium and chlorine in NaCl, KBr, and CaCl₂ is an ionic bond formed by the complete transfer of electrons.
Learn more about the covalent bond, here:
brainly.com/question/19382448
#SPJ2
plzzz help hahsbhd db question 5
Answer:
chemical reactions
Explanation:
Answer:
chemical reactions
Explanation:
Chemical reactions like weathering can cause rock and earth movement, plants grow from rain which is weathering, snow is weathering and cold winters is freezing water. I don't see how flowing water can contribute to weathering because in rivers, creeks, etc, always flowing. So if flowing water is always moving, it's not caused by weathering.
I EDITED MY ANSWER:
Physical weathering is caused by purely mechanical changes to the rock, while chemical weathering is caused by chemical reactions. The answer is chemical reactions
All matter has thermal energy because atoms are constantly
All matter has thermal energy because atoms are constantly in motion, due to motion all matter possess a kinetic energy. The total kinetic energy is known as thermal energy.
What is kinetic energy?The kinetic energy of an object is the energy that it possesses due to its motion. It is defined as the work needed to accelerate a body of a given mass from rest to its stated velocity. Having gained this energy during its acceleration, the body maintains this kinetic energy unless its speed changes
Thermal energy and temperature are closely related. Both reflect the kinetic energy of moving particles of matter. However, temperature is the average kinetic energy of particles of matter, whereas thermal energy is the total kinetic energy of particles of matter.
It increases or decreases only when the velocity changes, heavier objects, It can transform into other types of energy. It will occur regardless of the moving object's direction of travel.
Thus, all matters has thermal energy because atoms are constantly in motion.
To find more about Matter, refer the link below:
brainly.com/question/29232090
#SPJ2
Which of the following is a type of chemical reaction that releases energy from the bonds of a substance to form one or more new substances
Answer: any options like a or b
Explanation:
6.An acid-base indicator is usually a weak acid with a characteristic color in the protonated and deprotonated forms. Because bromocresol green is an acid, it is convenient to represent its rather complex formula as HBCG. HBCG ionizes in water according to the following equation:HBCG + H2O = BCG- + H3O+ (yellow)(blue)The Ka (the equilibrium constant for the acid) expression is: Ka=[BCG−][H3O+][HBCG]When [BCG-] = [HBCG], then Ka = [H3O+]. If you know the pH of the solution, then the [H3O+] and Ka can be determined. What would be the color of the solution if there were equal concentrations of HBCG and BCG-?Solution Color: _______________What is the pH at the first appearance of this color?Solution pH: __________What is an estimate for the Ka for bromocresol green? Show your work to get full credit
Answer:
At equal concentration of HBCG and BCG^-, the colour is green. This colour first appears at pH = 3.8
Explanation:
HBCG is an indicator that is prepared by dissolving the solid in ethanol.
Since
Ka=[BCG−][H3O+][HBCG]When [BCG-] = [HBCG], then Ka = [H3O+].
If pH = 3.8
Ka= [H3O+] = -antilog pH = -antilog (3.8)
Ka= 1.58 ×10^-4