Answer:
don't knoe sorry
Explanation:
The chemical formula for hydrogen chloride is HCl A chemist determined by measurements that moles of hydrogen chloride participate in a chemical reaction. Calculate the mass of hydrogen chloride that participates. Be sure your answer has the correct number of significant digits.
The question is incomplete, the complete question is;
. A chemist determined by measurements that 0.015 moles of hydrogen chloride participate in a chemical reaction. Calculate the mass of hydrogen chloride that participates Round your answer to 2 significant digits. x S. ?
Answer:
0.54 g
Explanation:
Recall that;
Number of moles = mass/molar mass
Molar mass of HCl =36.5 g/mol
Mass= number of moles × molar mass
Mass= 0.015 moles × 36 g/mol
Mass= 0.54 g
Classify each of the following as either macroscopic, microscopic or particulate:
a. a red blood cell.
b. a sugar molecule.
c. baking powder.
Answer:
Classify each of the following as either macroscopic, microscopic or particulate:
a. a red blood cell.
b. a sugar molecule.
c. baking powder.
Explanation:
a. A red blood cell is a microscopic particle.
It can be viewed under a microscope.
b. A sugar molecule is also a microscopic substance.
It can be viewed under a microscope.
c. Baking powder is macroscopic substance.
Which one of the following molecule is planer?
a. NF3 c. PH3
b. BH3 d. NCl3
Answer:
option a
hope helps you
have a great day
15. You are interested in separating 4-methylbenzoic acid from 1,4-dimethoxybenzene using a procedure similar to the extraction procedure we used in lab. You plan to use sodium bicarbonate instead of sodium hydroxide. a) Show the reaction between salicylic acid and sodium bicarbonate. Label the acid, base, conjugate acid, conjugate base. b) Give the pKa values of the acid and conjugate acid. c) Which base will work better, sodium hydroxide or sodium bicarbonate
Solution :
a). The separation of 4-methylbenzoic acid from 1,4-dimethoxybenzene will work but it will result in lower recovery.
In the reaction of acid-base to form a sodium 4 - methoxy benzoate, that is soluble in the water, 4-methoxy benzoic acid reacts with the sodium bicarbonate to give sodium 4-methoxybenzoate as well as carbonic acid.
b). The pKa for the 4-methoxybenzoic acid is [tex]4.46[/tex], and that of carbonic acid is [tex]6.37[/tex]
c). The Keq for the reaction is [tex]10(6.37 - 4.46) = 101.91[/tex]
Therefore, the equilibrium lies to the right and also the reaction favors the products and the separation works.
But the recovery will be low when compared to the extraction with Sodium hydroxide as the strong base will drive the equilibrium further to the right position, thus neutralizing all the acids virtually. And the weak base will partially neutralize the acid.
What is the law of multiple proportions?
A. The proportion of elements to compounds is constant.
B. All elements are found in equal proportions in nature.
C. Different compounds may contain the same elements but may have different ratios of those elements.
D. All compounds contain the same elements in the same proportions.
Answer:
I think
(d) All compounds contain the same elements in the same properties
Indicate if the following are the correct ground state electron configurations
for the atom listed by choosing correct or incorrect from the drop down menu.
1. Cr: [Ar]4s03d6
2. Zr: [Kr]5s23f144d2
3. Fe: [Ar]4s23d6
4. Co3+: [Ar]4s03d6
5. Ti2+: [Ar]4s03d2
6. Cu+: [Ar]4s23d8
Answer:
1) incorrect
2) incorrect
3) correct
4) correct
5) correct
6) incorrect
Explanation:
The correct electronic configuration of chromium is; [Ar] 3d⁵ 4s¹
The correct electronic configuration for Zr is; [Kr] 4d² 5s²
The correct electronic configuration of Cu^+ is; [Ar] 3d¹⁰
The electronic configuration of an atom refers to the arrangement of electrons in the atoms of such element.
The appropriate number of electrons and its properly written electronic configuration is clearly shown in this answer.
In a single displacement reaction Zinc can displace ALL but…
Iron
Nickel
Calcium
Lead
Answer:
Calcium
Explanation:
Zinc cannot displace Ca because calcium is above it in the reactivity series
4019K Express your answer as a nuclear equation.
Answer:
[tex]_{19} ^{40} K[/tex] → [tex]_{20} ^{40} Ca[/tex] + [tex]_{-1} ^{0} e[/tex] + ¯v
Explanation:
[tex]_{19} ^{40} K[/tex] is an unstable potassium isotope which has the capacity to undergo beta decay. During the decay process, it transforms to calcium atom with a release of beta particle and an antineutrino.
The required nuclear equation is:
[tex]_{19} ^{40} K[/tex] → [tex]_{20} ^{40} Ca[/tex] + [tex]_{-1} ^{0} e[/tex] + ¯v
The calcium formed due to this process is a stable atom.
9) Describe a method that could be used to extract lead from lead oxide (11). You will need
to include charcoal, an ignition (or test) tube and a Bunsen burner. Make sure
you include
each step and what safety measures you would take?
Answer:
Explained below.
Explanation:
In order to extract lead from lead oxide, we need to add carbon from coke to the lead oxide.
We will need;
A bunsen burner
A test tube
Charcoal
First step is to heat charcoal in an oxygen free environment. The safety measure here to ensure an oxygen free environment is to add some zinc metal powder into the test tube in order to remove any atmospheric oxygen inside the container.
Secondly, we will now put charcoal inside the test tube and turn on the bunsen burner to heat it until coke is formed.
Thirdly, we now introduce lead oxide into the coke inside the test tube and the carbon in the coke reacts with the lead oxide to produce lead and carbon dioxide.
Throughout all this process, since we required an oxygen free environment inside the test tube, whenever the test tube is opened, its neck must immediately be warmed by heat with the tube placed in a horizontal direction or very close to being in that horizontal direction so that any movement of air moves outwards from the tube.
Give the symbol for an element that is:__________
a. a halogen: _______________
b. an alkali metal: _______________
c. a noble gas: _______________
d. an alkaline earth metal : ____________
a. Br, Cl, F
b. Na, K, Ba
c. He, Ar, Ne
d. Ca, Ba, Mg
Answer:
a. halogen : F ,Cl ,Br l ,At
b an alkali metal: Na,Li, Rb, Cs
c. a noble gas: He, Ne, Kr, Ar
d. an alkaline earth metal: Be,Mg,Ca, Sr
hope it helps
stay safe healthy and happy...4.106
Calculate the moles and the mass of solute in each of the following solutions.
(a) 150.0 mL of 0.245 M CaCl2
molarity = moles of solute / volume of solution
moles of solute = molarity × volume of solution
moles of solute = 0.245 mol/L × 0.1500 L
moles of solute = 0.03675 mol
moles of solute = 0.0368 mol
-----------------------------------------------------------
Solution: (mass of solute)Step 1: Calculate the molar mass of solute.
molar mass of solute = (40.08 g/mol × 1) + (35.45 g/mol × 2)
molar mass of solute = 110.98 g/mol
Step 2: Calculate the mass of solute.
mass of solute = moles of solute × molar mass of solute
mass of solute = 0.03675 mol × 110.98 g/mol
mass of solute = 4.08 g
Note: The volume of solution must be expressed in liters (L).
Answer:
[tex]\boxed {\sf \bold {0.0368 \ mol \ CaCl_2}}}}[/tex]
[tex]\boxed {\sf \bold {4.08 \ g \ CaCl_2}}}}}[/tex]
Explanation:
1. Moles of SoluteMolarity is a measure of concentration in moles per liter.
[tex]molarity= \frac {moles \ of \ solute}{liters \ of \ solution}[/tex]
In this solution, there are 150.0 milliliters of solution and the molarity is 0.245 M CaCl₂ or 0.245 mol CaCl₂ per liter.
First, convert the milliliters to liters. There are 1000 milliliters in 1 liter.
[tex]{150 \ mL * \frac{1 \ L}{1000 \ mL}= \frac{150}{1000} \ L = 0.150 \ L[/tex]Now, substitute the known values (molarity and liters of solution) into the formula. The moles of solution are unknown, so we can use x.
[tex]0.245 \ mol \ CaCl_2 /L= \frac{ x}{0.150 \ L}[/tex]
We are solving for x, so we must isolate this variable. It is being divided by 0.150 L. The inverse of divisions is multiplication, so we multiply both sides by 0.150 L.
[tex]0.150 \ L *0.245 \ mol \ CaCl_2 /L= \frac{ x}{0.150 \ L} * 0.150 L[/tex]
[tex]0.150 \ L *0.245 \ mol \ CaCl_2 /L=x[/tex]
The units of liters cancel.
[tex]0.150 *0.245 \ mol \ CaCl_2 =x[/tex]
[tex]0.03675 \ mol \ CaCl_2[/tex]
The original measurements have 3 significant figures, so our answer must have the same.
We should round to the ten thousandths place. The 5 to the right of this place tells us to round the 7 up to an 8.
[tex]\bold {0.0368 \ mol \ CaCl_2}[/tex]
2. Mass of the SoluteWe can convert mass to moles using the molar mass. These values are found on the Periodic Table. They are the same as the atomic masses, but the units are grams per mole (g/mol) instead of atomic mass units.
The solute is calcium chloride: CaCl₂. Look up the molar masses of the individual elements.
Ca: 40.08 g/mol Cl: 35.45 g/molNotice that chlorine has a subscript of 2. We must multiply the molar mass by 2.
Cl₂: 35.45 *2= 70.9 g/molAdd calcium's molar mass.
CaCl₂: 40.08 + 70.9 =110.98 g/molUse the molar mass as a ratio.
[tex]\frac {110.98 \ g\ CaCL_2}{ 1 \ mol \ CaCl_2}[/tex]
Multiply the moles of calcium chloride we calculated above.
[tex]0.0368 \ mol \ CaCl_2 *\frac {110.98 \ g\ CaCL_2}{ 1 \ mol \ CaCl_2}[/tex]
The units of moles of calcium chloride cancel.
[tex]0.0368 *\frac {110.98 \ g\ CaCL_2}{ 1 }[/tex]
[tex]4.084064 \ g\ CaCl_2[/tex]
Round to 3 significant figures again. For this number, it is the hundredths place. The 4 in the thousandths place tells us to leave the 8.
[tex]\bold {4.08 \ g \ CaCl_2}[/tex]
which straight-chain alkane would you predict to be the most viscous? all are liquids exhbiting the general bonding pattern ch3-(ch2)n-ch3
The question is incomplete, the complete question his;
Which straight chain alkane below would you predict to be the most viscous? Why? All are liquids exhibiting the general bonding pattern CH3-(CH2)n-CH3
C9H20
C10H22
C5H12
C6H14
C12H26
Answer:
C12H26
Explanation:
Generally, the viscosity of a liquid increases with increase in molecular mass of the substance.
Liquids of high molecular mass do not flow easily. This means that they posses high viscosity.
Thus, since C12H26 has the highest molecular mass among the options given in the question, C12H26 exhibits the greatest viscosity.
once a recrystallization is completed and filtered, what solvent would be suitable for transferring the leftover solids to filtration funnel
Answer:
To transfer leftover solids to the filtration funnel and wash out crystals after recrystallization, ice cold methanol should be used (the mother liquor used for recrystallization).
Explanation:
Hope this helped
What does the term spontaneous mean in chemical reactions?
A. Producing heat as a product
B. Occurring without added energy
C. Occurring only at high temperatures
D. Occurring in an aqueous solution
Answer:
B
Explanation:
Spontaneous in chemical reactions means without any external input.
Occurring without added energy. Hence, option B is correct.
What is a spontaneous reaction?A spontaneous reaction is a reaction that supports the formation of products under the conditions under which the reaction is happening.
Spontaneous Reaction- a reaction that favours the formation of products at the conditions under which the reaction is occurring.
A non-spontaneous reaction can be made spontaneous if it is inside a controlled environment, this is what happens in nuclear power plants that create atomic fusion and fission in chambers that are controlled to control different particles to create nuclear active rays.
Hence, option B is correct.
Learn more about the spontaneous reaction here:
brainly.com/question/23142328
#SPJ5
What intermolecular force or bond is primarily responsible for the solubility of chlorine (Cl2) in water
The question is incomplete, the common question is;
What intermolecular attractive force is primarily responsible for the solubility of chlorine, Cl2, in water?
a. dipole - dipole
b. hydrogen bonding
c. dipole-induced dipole
d. ion-dipole
e. ion-induced dipole
Answer:
dipole-induced dipole
Explanation:
We have to remember that water is a polar molecule hence it possesses a dipole moment. Its dipole moment is responsible for the ability of water to dissolve many substances.
On the other hand, Cl2 is a nonpolar molecule bound together by only weak dispersion forces.
Recall that dispersion forces involve transient appearance of a dipole in a molecule.
Water molecules can induce a dipole in Cl2 thereby causing the both molecules to interact and Cl2 dissolves in water.
The Bohr model of the atom explains why emission spectra are discrete. It could also be used to explain the photoelectric effect. Which is a correct explaination of the photoelectric effect according to the model
Answer:
photoelectric effect, phenomenon in which electrically charged particles are released from or within a material when it absorbs electromagnetic radiation. The effect is often defined as the ejection of electrons from a metal plate when light falls on it.
Which statement is about population density
Explanation:
Population density is defined as the number of people present per square kilometre. Population density of India according to 2011 census is 382 persons per square kilometres.
Describe the electron configuration of an atom using principal energy level, sublevels, orbitals, and periodic table. Give one example others may not think about and why you made this selection.
Silicon is not allowed.
Explanation:
The electron density number as well as the sublevel letter are used to describe valence electrons in an atom. The third total energy and subbasement p, for example, is denoted by 3p. The electron configuration of oxygen, for example, is 1s^2 2s^2 2p^4, which means the first two electrons will couple up in the 1s orbital, while the following two protons will pair up in the 2s orbital.
The sample atom is Carbon with electron configuration; 1s² 2s² 2p².
The principal energy level of an electron refers to the shellp in which the electron is located relative to the atom's nucleus. In this case only 2 energy levels exist in a carbon atom; which are energy level 1 and 2
The sublevels exist within a principal energy and the electron configuration of an atom is described with consideration of energy sublevels. The sublevels in a carbon atom are;
s and p energy sublevels.The orbitals in this configuration are: 1s 2s 2px 2py 2pz in which case; each orbital can accommodate 2 electrons each.
Ultimately, the location of an element on the periodic table with respect to group and period are used to determine the valency and no. of energy levels in the atom of that Element.
Read more:
https://brainly.com/question/13749106
Organic foods do not contain chemicals.
True
False
In an endothermic reaction, reactants are __ products.
equal to
less stable than
more stable than
equally stable than
The blank is the accepted form of gathering and reporting information within the science community.
Answer:
Scientific method.
Explanation:
Scientific method is the way taken to acquire scientific knowledge. It includes experiments, statistical analysis of existing data, and all kinds of observations of the world around us, while theoretical research is based on deriving certain theories about the world from basic principles, in a mathematical or logical way. The scientific method applies to both types of research, and emphasizes that scientific research is objective, that it can be verified by other scientists, and that knowledge is not acquired without context, but in a way that leads to a greater understanding of previous research and the world. we live in. To contribute to this, researchers are expected to clearly record both their findings and the methods they use to arrive at the results.
Which is the primary type of radiation from the sun that is absorbed by the ozone layer?
A. infrared radiatin
B. UV-B
C. X-rays
D. UV-C
E. UV-A
the answer to the question is B.UV-B
Enter a balanced equation for the reaction between solid nickel(II)(II) oxide and carbon monoxide gas that produces solid nickel and carbon dioxide gas. Express your answer as a chemical equation. Identify all of the phases in your answer.
Answer: A balanced equation for the given reaction is [tex]NiO(s) + CO \rightarrow Ni(s) + CO_{2}(g)[/tex].
Explanation:
The reaction equation will be as follows.
[tex]NiO(s) + CO \rightarrow Ni(s) + CO_{2}(g)[/tex]
Number of atoms on the reactant side is as follows.
O = 2C = 1Number of atoms on the product side is as follows.
Ni = 1O = 2C = 1Since number of atoms on both the reactant and product sides are equal. Hence, the reaction equation is balanced.
Thus, we can conclude that a balanced equation for the given reaction is [tex]NiO(s) + CO \rightarrow Ni(s) + CO_{2}(g)[/tex].
1. Show that heat flows spontaneously from high temperature to low temperature in any isolated system (hint: use entropy change that occurs during the process for your proof).
2. Work out the entropy change for the decomposition of mercuric oxide using mathematical and graphical arguments.
Answer:
1 ) Δs ( entropy change for hot block ) = - Q / th ( -ve shows heat lost to cold block )
Δs ( entropy change for cold block ) = Q / tc
∴ Total Δs = ΔSc + ΔSh
= Q/tc - Q/th
2) ΔSdecomposition = Δh / Temp = ( 181.6 * 10^3 / 773 ) = 234.928 J/k
Explanation:
1) To show that heat flows spontaneously from high temperature to low temperature
example :
Pick two(2) solid metal blocks with varying temperatures ( i.e. one solid block is hot and the other solid block is cold )
Place both blocks for time (t ) in an insulated system to reduce heat loss or gain to or from the environment
Check the temperature of both blocks after time ( t ) it will be observed that both blocks will have same temperature after time t ( first law of thermodynamics )
Δs ( entropy change for hot block ) = - Q / th ( -ve shows heat lost to cold block )
Δs ( entropy change for cold block ) = Q / tc
∴ Total Δs = ΔSc + ΔSh
= Q/tc - Q/th
2) Entropy change for Decomposition of mercuric oxide
2HgO (s) → 2Hg(l) + O₂ (g)
Δs = positive
there is transition from solid to liquid and the melting point of mercury ( the point at which reaction will take place ) = 500⁰C
hence ΔSdecomposition = S⁻ Hg - S⁻ HgO =
Δh of reaction = 181.6 KJ
Temp = 500 + 273 = 773 k
hence ΔSdecomposition = Δh / Temp = ( 181.6 * 10^3 / 773 ) = 234.928 J/k
In the context of small molecules with similar molar masses, arrange the intermolecular forces by strength.
a. London dispersion forces
b. hydrogen bonding
c. dipole-dipole interactions
Answer:
Hydrogen bonding - London dispersion forces - dipole-dipole interactions
Strongest ----> Weakest
How many atoms in each elemental sample?
4.9 mol Cu
5.4•10^-3 Mol C
24.0 Mol Hg
0.160 mol Na
Answer:
2.9 × 10²⁴ atoms Cu; 3.3 × 10²¹ atoms C; 1.44 × 10²⁵ atoms Hg; 9.63 × 10²² atoms Na
Explanation:
To convert moles to atoms, we need a conversion factor: Avogadro's number. There are 6.02 × 10²³ atoms in 1 mole of atoms.
4.9 mol Cu × 6.02 × 10²³ atoms Cu/1 mol Cu = 2.9 × 10²⁴ atoms Cu
5.4 × 10⁻³ mol C × 6.02 × 10²³ atoms C/1 mol C = 3.3 × 10²¹ atoms C
24.0 mol Hg × 6.02 × 10²³ atoms Hg/1 mol Hg = 1.44 × 10²⁵ atoms Hg
0.160 mol Na × 6.02 × 10²³ atoms Na/1 mol Na = 9.63 × 10²² atoms Na
Calculate the average atomic mass for X
Answer:
39.0229 amu
Explanation:
Hello there!
In this case, according to given information, the idea here is to multiply the percent abundance by the mass number of each isotope and then add them all together as shown below:
[tex]=0.0967*38+0.7868*39+0.1134*40+0.0031*41\\\\=3.6746+30.6852+4.536+0.1271\\\\=39.0229amu[/tex]
Regards!
formula of
Al³⁺ and SO₄²⁻
Answer:
The formula of Al³⁺ and SO₄²⁻ is aluminum sulfate.
Explanation:
The formula for aluminum sulfate is Al₂(SO₄)₃. If we say in terms of ions. The ions are Al³⁺. It is a positive ion or the cation. Other ion is SO₄²⁻. It is sulfate ion. It is anion.
Aluminum sulphate is used in water purification and as a mordant in dyeing and printing textiles.
Hence, the formula of Al³⁺ and SO₄²⁻ is aluminum sulfate.
Under certain conditions, the substance mercury(II) oxide can be broken down to form mercury and oxygen. If 32.2 grams of mercury(II) oxide react to form 29.8 grams of mercury, how many grams of oxygen must simultaneously be formed
Explanation:
This is a decomposition reaction. Firstly, you will want to write the chemical equation out and balance it.
[tex]2Hg_2O->4Hg+O_2[/tex] (The -> is supposed to be an arrow, sorry!)
We see that there's only 1mol of Oxygen made in the products, we can do some simple math to solve for the amount of grams of Oxygen produced according to the amount of the reactant (Hg2O).
[tex]32.2gHg_2O*\frac{1molHg_2O}{417.18gHg_2O}*\frac{1molO_2}{2molHg_2O}*\frac{32gO_2}{1molO_2}[/tex]
I want to break this down, just in case:
The 417.18gHg2O is the molecular mass of the molecule (so I doubled Hg and added 16 to it to get this number).
As we can see in the chemical equation, 1mol Hg2O produces 2mol O because Oxygen is a diatomic molecule (so there will always be two of it when it's by itself).
And finally, in 1mol O2 there are 32g of O2.
** When you do math like this, always make sure that all of your units cancel out except for the units you're looking for. For example, here we're looking for the grams of Oxygen, so after everything else cancels out, we should only have grams O2.
So, 1.23gO2 should be your answer.
14 protons,14 electrons and 14 neutrons
the answer is silicon!!