Answer:
avg w= (delta theta)/delta T = (10 rad/s - 8 rad/s) / (4 s-0) = .5 rad/s Vt= r * avg w = 4m * .5 rad/s = 2 rad/s
angular velocity of a rotating wheel increases 2 rev/s every minute. The angular acceleration of this wheel is:
The angular acceleration of the rotating wheel at the given rate of change of angular velocity is 0.21 rad/s².
Angular acceleration of the wheel
The angular acceleration of an object is the rate of change of anguar velocity of the object with time.
[tex]\alpha = \frac{\Delta \omega }{\Delta t}[/tex]
where;
Δω is the change in the angular velocityΔt is the change in timeChange in angular velocity of the wheel is calculated as follows;
[tex]\Delta \omega = 2 \ \frac{rev}{s} \times \frac{2\pi \ rad}{1 \ rev} = 4\pi \ rad/s = 12.57 \ rad/s[/tex]
Change in time, Δt = 1 min = 60 s
The angular acceleration of the rotating wheel is calculated as follows;
α = (12.57) / (60)
α = 0.21 rad/s²
Thus, the angular acceleration of the rotating wheel at the given rate of change of angular velocity is 0.21 rad/s².
Learn more about angular acceleration here: https://brainly.com/question/25129606
A man tries to push a 200 kg Car that moves at a acceleration 0.50 m/s2. The man is able to displace the car 10 m. How much work did he do?
The work done by the man pushing the car over the given distance is 1000J.
Given the data in the question;
Mass of car; [tex]m = 200kg[/tex]Acceleration of the car; [tex]a = 0.5m/s^2[/tex]Distance covered by the car; [tex]d = 10m[/tex]Work done; [tex]W = \ ?[/tex]
Work done is simply defined as the energy transfer that takes place when an object is either pushed or pulled over a certain distance by an external force. It is expressed as;
[tex]Work\ done = f * d[/tex]
Where f is force applied and d is distance travelled.
To determine the work done by the man, we first solve for the force applied F.
From Newton's Second Law; [tex]Force \ F = m * a[/tex]
We substitute our given values into the expression
[tex]F = m * a \\\\F = 200kg * 0.5m/s^2\\\\F = 100kg.m/s^2[/tex]
Next we substitute our values into the expression of work done above.
[tex]Work \ done = f * d\\\\Work \ done = 100kg.m/s^2 * 10m\\\\Work \ done = 1000kgm^2/s^2\\\\Work \ done = 1000J[/tex]
Therefore, the work done by the man pushing the car over the given distance is 1000J.
Learn more about work done: https://brainly.com/question/26115962
Light travels at 3.0 × 108 m/s in a vacuum. use the index of refraction for water to determine the speed of light in water. round your answer to the nearest tenth. × 108 m/s
Answer:
the answer is 2.3. I just answered this question and got it right.
Explanation:
The phenomenon bending of a wave as it crosses from one medium to another is said to be refraction. The speeds of light in the water will be 2.25×10⁸ m/sec.
What is the definition of refraction?The phenomenon bending of a wave as it crosses from one medium to another is said to be refraction. The difference in density is the cause of the bending.
Refraction is a term that is used to describe the phenomenon of refraction."The change in direction of a wave traveling through one medium to another is known as refraction."
The following data are given in the problem;
C is the Speed of light in a vacuum =3×10⁸ m/sec.
n is an index of refraction for water = 1.333
v is the speed of light in the water=?
The index of refraction is the ratio of the speed of light in a vacuum to the speed of light in water. By the formula of the index of refraction.
[tex]n=\dfrac{c}{v}[/tex]
[tex]V=\dfrac{c}{n}[/tex]
[tex]V=\dfrac{3\times10^8}{1.333}[/tex]
[tex]V=2.25\times 10^8 m/s[/tex]
Hence the speed of light in the water will be 2.25×10⁸ m/sec.
To learn more about refraction refer to the link;
brainly.com/question/17156275
Which temperature scale does NOT have negative values?
Celsius
Fahrenheit
Kelvin
All of these are correct
Answer:
Kelvin scale degrees
Explanation: The Kelvin scale starts at 0°k, the lowest possible temperature, as at this point, all movement stops at an atomical level.
Answer:
Kelvin
Explanation:
Kelvin is the only temperature scale that when it hits 0, the universe would be frozen. it is the lowest possible temperature.
C(i). A body weighs 600g in air and 400g in water. Calculate;
i. Up thrust of the body
ii. Volume of the body
iii. Relative density of the solid
iv. Density of the solid
Answer:
B buoyant force (mass) = 600 - 400 = 200 g (I)
upthrust is 200 g due to decrease in apparent body weight
(Note that g is being treated as force here when it is actually mass)
D = M / V definition of density
since density of water is 1 (1 g / cm^3)
from (I) the equivalent volume of water is 200 cm^3 since the upthrust will equal the weight of the water displaced
Relative density of solid is 600 g / 200 g = 3 (weight of solid vs the weight of the water displaced
D = 3 g / cm^3 density of solit
11. Which of the following gives the correct relation between the acceleration due to gravity and period of a pendulum?
g = 2πLT2
g = 4π2LT2
g = 2πLT
g = 2π2LT
Please show all of your algebra.
[tex]\\ \rm\rightarrowtail T=2\pi\sqrt{\dfrac{l}{g}}[/tex]
Derive g[tex]\\ \rm\rightarrowtail T^2=4\pi^2\dfrac{l}{g}[/tex]
[tex]\\ \rm\rightarrowtail g=\dfrac{4\pi ^2\ell}{T^2}[/tex]
[tex]\\ \rm\rightarrowtail g=\left(\dfrac{2\pi\sqrt{l}}{T}\right)^2[/tex]
Why is a 1 solar-mass red giant more luminous than a 1 solar-mass main sequence star?.
Answer:
No
Explanation:
I dont know please help
Un motor eléctrico consume 10A de corriente de un circuito de 120v. Calcular la potencia y el trabajo que suministra al motor durante 5hrs de funcionamiento:
A) P=0.9 kw, T=6 kwh
B) P=0.85 kw, T=4 kwh
C) P=1.2 kw, T=3 kwh
D) P=1.2 kw, T=6 kwh
Answer:
D. P=1.2 kw, T=6kwh
Explanation:
P = A × V
P = 120×10
= 1200 watts or 1.2 kw
T = Watts × hr
1000
= 1200 × 5
1000
= 6 kwh
An iron sphere of radius 0.18m has mass 190 kg. Calculate the density of the iron
Volume:-
[tex]\\ \sf\rightarrowtail \dfrac{4}{3}\pi r^3[/tex]
[tex]\\ \sf\rightarrowtail \dfrac{4}{3}\pi (0.18)^3[/tex]
[tex]\\ \sf\rightarrowtail \dfrac{4}{3}\pi (0.005832)[/tex]
[tex]\\ \sf\rightarrowtail 0.024m^3[/tex]
Mass=190kgDensity:-
[tex]\\ \sf\rightarrowtail \dfrac{Mass}{Volume}[/tex]
[tex]\\ \sf\rightarrowtail \dfrac{190}{0.024}[/tex]
[tex]\\ \sf\rightarrowtail 7916.67kg/m^3[/tex]
Choose all the answers that apply.
The United States
launched the first man into space
built the first space station
sent the first animal into space
was the first country to send a person to the moon
successfully landed å spacecraft on the moon
Answer:
launched the first man into space
was the first country to send a person to the moon
successfully landed å spacecraft on the moon
What type of gas absorbs and re-emits infrared radiation?.
Answer:
Carbon Dioxide absorbs and re-emits the infrared radiation.
Calculate the volume of 500 kilograms
to 2 decimal places
flead if the density of lead is 11400 kg/m². Give your answer
Enter your answer to 2 decimal places
Answer:
d (density) = M / V
V = M / d = 500 kg / (11400 kg / m^2 = .044 m^3
If all of the resistors in the circuit were decreased in value by a factor of 1,000, would the current in each resistor simply increase by a factor of 1,000? explain your answer
In a circuit, if the resistors were decreased by a factor of 1,000, it is true that the current would increase by a factor of 1,000, according to Ohm's Law.
What is Ohm's Law?It is a law in electricity that posits that the voltage that goes through a conductor is directly proportional to the current.
How does Ohm'slaw explain the change in current?One formula in Ohm's law is:
Voltage = Current x Resistance
If the resistance were to decrease by a factor of 1,000, the current would have to increase by a factor of 1,000 as well in order to give the same voltage.
Find out more on Ohm's law at https://brainly.com/question/14296509.
if the impulse acting on an object is 100n waht is force acting on it if the time 1 s
force = 100 N
Impulse ( N.s ) : Force ( N ) * Time ( s )⇒ 100 N.s = force * 1 s
⇒ force = 100/1
⇒ force = 100 N
Answer :-
The required Force is 100 Newton .Explanation :-
As per the provided information in the given question, we have been given that the Impulse of the Object is 100 Ns . It's Time is given as 1 sec . And, we have been asked to calculate the Force .
For calculating the Force , we will use the Formula :-
[tex] \bigstar \: \: \: \boxed {\sf { \: Force \: = \: \dfrac {Impulse}{Time} \: }} [/tex]
Therefore , by Substituting the given values in the above Formula :-
[tex] \dag \: \: \: \sf {Force \: = \: \dfrac {Impulse}{Time}} [/tex]
[tex] \Longrightarrow \: \: \: \sf {Force \: = \: \dfrac {100}{1}} [/tex]
[tex] \Longrightarrow \: \: \: \textbf {\textsf {Force \: = \: 100}} [/tex]
Hence :-
Force = 100 Newton .[tex] \underline {\rule {180pt}{4pt}} [/tex]
For ____________, the error is calculated by finding the sum of squared distance between actual and predicted values
Answer: It is minimising
For minimizing, the error is calculated by finding the sum of the squared distance between actual and predicted values.
What is the error?The difference between the measured and analysis of the financial statements might well be defined as an error. For instance, if the two operators use the same complete and precise tool.
We have:
For ____________, the error is calculated by finding the sum of the squared distance between actual and predicted values
The correct answer is minimizing because according to the information provided in the problem. The sum of squared distance between actual and anticipated values is calculated to "minimize" the mistake.
This is one of the most significant aspects of statistics, and it involves mathematical computations involving error calculations for various values.
Thus, for minimizing, the error is calculated by finding the sum of the squared distance between actual and predicted values.
Learn more about the error here:
https://brainly.com/question/13089857
#SPJ4
A bus start moving from rest .If its velocity after 5 seconds becames 10 m/s ,find acceleration
Answer:
2 [tex]m/s^{2}[/tex]
Explanation:
acceleration = (final-initial velocity) / time
= (10-0)/5
=2
In what type of system is mechanical energy lost to its surroundings?
A. internal
B. external
C. closed
D. open
help.
Answer:
If you consider systems as internal, external, or open then energy can only be exchanged between systems that are classified as -
(D) open
For instance if you want to classify the work done in lifting a bucket of water from a well, then this is an internal system as opposed to a system where you would have to consider the work done on the earth and its surrounding stars.
Because of the costs involved in maintaining high temperatures and pressure, nuclear _______ is not yet a practical method for generating electrical energy.
Which best completes the statement?
fusion
fission
energy
generators
Answer:
A
Explanation:
i just took the test
Answer:
A - Fusion !
Explanation:
Person above me is correct, I just took "The Impact of Human Activity" Unit Test.
Question 4 of 5
The picture shows a model of a cell.
W
What is the main function of the part labeled Win the model?
Explanation:
it is not clear. I can't see w.
A boy walks up a hill. His displacement from his starting point is (800, 150) m. How much gravitational potential energy has he gained?
Answer:
The potential energy gained is 1500m joule.
Explanation:
Hope this helps!
Answer:
Answer: He 1500m joule amount of gravitational potential energy
Explanation:
Good Luck
hope it helps
Mark as brainliest please
what are various paradox related to time travel?
Answer:
This is a paradox — an inconsistency that often leads people to think that time travel cannot occur in our universe." A variation is known as the "grandfather paradox" — in which a time traveler kills their own grandfather, in the process preventing the time traveler's birth
Explanation:
hope this Wil help ....
29. A pendulum with a period of 2.00000 s in one location (g=9.80m/s2) is moved to a new location where the period is now 1.99796 s. What is the acceleration due to gravity at its new location?
Please include all of your steps to the solution.
Answer:
9.82 m/s²
Explanation:
The time period of a pendulum, a body fixed to a pivot by means of a string, is given by the time it takes to complete a single cycle from right to left or left to rightThe formula is given as :⇒ T = 2π√(L/g) [← Important]
L represents the length of the string and g is the value of gravity due to acceleration
Original Time Period [To calculate length of the string]
T = 2π√(L/g)2 = 2π√(L/9.8)L = 9.8/π²L = 0.99646 m [← Keep in mind, we'll need it later!]Calculating value of g' (new acceleration)
T = 2π√(L/g')1.99796 = 2π√0.99646/g' [← From earlier!]g' = 9.82 m/s² (approximately)Hope it helped~
What is the distance a spring is compressed if the spring constant is 10 m/n, and a force
of 25 n is applied?
Answer:
40n
Explanation:
10×25 all over 100 ,25 into hundred 4 times 10×4 =40n
A particular lightbulb is designed to consume 40 W when operating on a car's 12-V DC electric power. If you supply that bulb with 12-V AC power from a transformer, how much power will it consume
2. Describe the new digital governance and sourcing approach since accelerate implementation. Include both project management and portfolio management decision-making and accountability
The prompt seeks to explain how Philips uses digital governance in its sourcing approach or procurement.
How did Philips use a New Digital Governance and Sourcing approach?
Phillips was able to achieve this by hosting the "Supplier Development Group".
Then, various departments within Phillips met with the supplier's Group to find out how more raw materials could be gotten in the most environmentally friendly way possible.
Learn more about Digital Governance at:
https://brainly.com/question/381572
The new digital governance and sourcing approach is described as strategy to accelerate implementation.
What is New Digital Governance?Digital tools along with social media have empowered people to have access to infinite information and make connections globally. All the citizens or individuals are using digital based technologies to get hold of benefits caused by using them.
Sourcing approach is used in supply chain management that gathers the information and used in an organization for purchasing power. This finds the best possible values in the marketplace. This strategy helps to attain business goals.
Learn more about Digital Governance.
https://brainly.com/question/381572
#SPJ4
a person walks 15.0 m in 5.00 s, and then walks 12.0 m in 10.00 s. What is the average
speed of the person?
Derive an expression for the block's centripetal acceleration ac in terms of m , θ , and physical constants, as appropriate
The expression for the block's centripetal acceleration is derived as ω²r or v²/r.
What is centripetal acceleration?The centripetal acceleration of an object is the inward or radial acceleration of an object moving in a circular path.
The expression for the block's centripetal acceleration is derived as follows;
ω = dθ/dt
where;
ω is the angular speed θ is the angular displacementt is the time of motionac = ω²r
where;
r is the radius of the circular pathAlso, ω = v/r
ac = (v/r)²r
ac = v²/r
Thus, the expression for the block's centripetal acceleration is derived as ω²r or v²/r.
Learn more about centripetal acceleration here: https://brainly.com/question/79801
FOR STUDY ISLAND: Objects that stop the flow of electricity are good insulators. Which of the following materials would be the best insulator for an electrical wire?
A.
aluminum pipes
B.
copper wire
C.
plastic tubing
D.
water
Answer: It would be; A/B
Which property of the sound wave changes when the volume is increased on a radio?.
Answer:
amplitude
Explanation:
When we increase the volume of a sound, the amplitude of the wave is increased. The frequency of a wave is related to its pitch. If the pitch is high, then the frequency of the wave is high. This means that the wave will looked squashed on an oscilloscope trace.
1. The Particle Theory of Matter says that. A. Particles are in constant motion
b. Everything is made up of particles
c. Plasmas have charged particles
d. Solids have no particles
Answer:
a. Particles are in constant motion.