Oxygen has an atomic number of 8. The total amount of nucleons in the atom's nucleus determines its mass.
What makes oxygen 16?Six electrons are arranged the outer shells in the electron configurations of the elements in Lanthanide series of the periodic table. When two more electrons are added to an atom with such an electronic structure, it tends to create a stable ring of eight electrons, resulting in an ion with a double negative charge.
The valence shell is eight; why?In general, when an atom's outer electron shell is full, it is at its most stable and least reactive. The majority of biologically significant elements require eight electrons inside their outer shell to be stable.
To know more about atomic visit :
https://brainly.com/question/1566330
#SPJ4
a neutral, sp-hybridized carbon can form sigma-bonds and pi-bonds?
A neutral, sp-hybridized carbon can form pi bonds.
What is sp hybridization?Sp hybridization refers to the mixing of an s orbital and a p orbital to form a new hybrid orbital. This type of hybridization occurs in atoms that have an octet of electrons in the valence shell, such as nitrogen and carbon, and requires the formation of one or more new sigma bonds between the atom and another atom.
In sp hybridization, the s orbital and one of the p orbitals combine to form two identical hybrid orbitals, each with 50% s character and 50% p character.
Learn more about hybridization:https://brainly.com/question/14140731
#SPJ1
How do you find the rate law of a reaction mechanism?
The mechanism of the reaction should theoretically reveal the rate law. By equating the derivatives of the reaction rate with respect to the reactant concentration to zero, it is possible to derive the rate law from the mechanism.
What are the different rate law of a reaction mechanism?Keep in mind the significant distinction between formulating rate laws for simple reactions and the chemical equation that balances the entire reaction. The concentration of our reactants can affect the rate of the reaction.
However, since it is a one-step mechanism and is thus also an elementary step, the rate law cannot be determined from the entire reaction's balanced chemical equation.
Therefore, The rate law of a chemical reaction is an equation that outlines the connection between the concentrations of the reactants and the reaction rate. The highest order of the derivatives dictates the sequence of the reaction.
Learn more about reaction mechanism here:
https://brainly.com/question/14010810
#SPJ4
The mechanism of the reaction should theoretically reveal the rate law. By equating the derivatives of the reaction rate with respect to the reactant concentration to zero, it is possible to derive the rate law from the mechanism.
What are the different rate law of a reaction mechanism?Keep in mind the significant distinction between formulating rate laws for simple reactions and the chemical equation that balances the entire reaction. The concentration of our reactants can affect the rate of the reaction.
However, since it is a one-step mechanism and is thus also an elementary step, the rate law cannot be determined from the entire reaction's balanced chemical equation.
Therefore, The rate law of a chemical reaction is an equation that outlines the connection between the concentrations of the reactants and the reaction rate. The highest order of the derivatives dictates the sequence of the reaction.
Learn more about reaction mechanism here:
brainly.com/question/14010810
#SPJ4
You are conducting a calorimetry experiment using a calorimeter with 500 mL of water in its outer chamber to determine the enthalpy of reaction of a chemical reaction. The initial temperature of the water was 25 °C. After the reaction, the temperature of the water was 57. 4 °C. Disregarding any heat loss to the walls of the container, calculate the Hf). (The specific heat of the water is 4. 18J/(g times k)
The temperature of the water was 25 °C. After the reaction, the temperature of the water was 57. 4 °C. Disregarding any heat loss to the walls of the container, the enthalpy of the reaction is 68.18 kJ.
Enthalpy (H) is a thermodynamic quantity that represents the total heat content of a system. It is the sum of the internal energy of the system and the product of its volume and pressure.
In other words, enthalpy is a measure of the heat energy involved in a process or reaction. The unit of enthalpy is usually joules (J) or kilojoules (kJ).
The heat generated by the reaction (q) can be calculated as follows:
q = m * c * ΔT
where m is the mass of the water in the calorimeter (0.5 kg), c is the specific heat of water (4.18 J/(g * K)), and ΔT is the change in temperature (57.4 - 25 = 32.4 K).
q = 0.5 kg * 4.18 J/(g * K) * 32.4 K = 68.18 kJ
Since the heat generated by the reaction is equal to the heat absorbed by the water, the enthalpy of the reaction (ΔH) can be calculated as follows:
ΔH = q = 68.18 kJ
Therefore, The temperature of the water was 25 °C. After the reaction, the temperature of the water was 57. 4 °C. Disregarding any heat loss to the walls of the container, the enthalpy of the reaction is 68.18 kJ.
To know more about enthalpy refer to:
brainly.com/question/13996238
#SPJ4
draw the major organic product(s) you would expect from the reaction of the alkyl halide below with na -sch3.
The product you would expect from the reaction of the given alkyl halide with (1) Na+− SCH3 is given as: (2) Na+− OH (green = Cl).
Describe alkyl halides with an example.
In essence, an alkyl halide has a halogen atom linked to a carbon atom that has undergone sp3 hybridization. Ethyl chloride CH3CH2Cl, propyl bromide CH3CH2CH2Br, etc. are examples of alkyl halides. Alkyl halides, which are found in your blood and react to injury or disease, can be divided into three main groups: primary (1), secondary (2), and tertiary (3).
How is an alkyl halide defined?
Haloalkanes are another name for alkyl halides. Alkyl halides are substances in which halogen atoms have taken the place of one or more hydrogen atoms in an alkane (fluorine, chlorine, bromine or iodine).
Learn more about alkyl halide:
brainly.com/question/6419720
#SPJ4
what is the hydronium ion [h3o ] concentration of a solution with a ph of 6 ?
The hydronium io [H₃O⁺] concentration of the solution with the pH of the 6 is 1.0 × 10⁻⁶ M.
The pH expression is as follows :
pH = - log [H₃O⁺]
where, the pH = 6
The Potential of the hydrogen, is the scale used to define the acidity or the basicity of an aqueous solution.
By solving the value , we get :
pH = - log [H₃O⁺]
Where
The value of the pH = 6
6 = - log [H₃O⁺]
[H₃O⁺] = 10⁻⁶ M
[H₃O⁺] = 1.0 × 10⁻⁶ M
Thus, the hydronium ion [H₃O⁺] concentration is 1.0 × 10⁻⁶ M in the solution with the pH of the value 6.
To learn more about pH here
https://brainly.com/question/29594131
#SPJ4
three ways in which compounds differ from mixtures
Compounds always have the same fixed chemical composition. The constituent chemicals that make up a combination can vary. Homogeneous or heterogeneous mixtures can exist. The only two methods that can be used to separate a compound's components are chemical and electrochemical ones.
Is heterogeneous a synonym for strange?The statement is untrue. In reality, they have different meanings and are different terms. A building is said to be heterogeneous if it has different parts or pieces that look erratic or discolored.
What is the difference between heterogeneous and homogeneous?The overall appearance and composition of a homogenous mixture are consistent. Solutions are the term used to describe a wide variety of homogenous mixtures. There are distinct constituents or stages in a heterogeneous combination. Gas, liquid, & solid matter exist inside the 3 parts or states.
To know more about heterogeneous visit:
https://brainly.com/question/11670385
#SPJ4
Compounds always have the same fixed chemical composition. The constituent chemicals that make up a combination can vary. Homogeneous or heterogeneous mixtures can exist. The only two methods that can be used to separate a compound's components are chemical and electrochemical ones.
Is heterogeneous a synonym for strange?
The statement is untrue. In reality, they have different meanings and are different terms. A building is said to be heterogeneous if it has different parts or pieces that look erratic or discolored.
What is the difference between heterogeneous and homogeneous?
The overall appearance and composition of a homogenous mixture are consistent. Solutions are the term used to describe a wide variety of homogenous mixtures. There are distinct constituents or stages in a heterogeneous combination. Gas, liquid, & solid matter exist inside the 3 parts or states.
To know more about heterogeneous visit:
brainly.com/question/11670385
#SPJ4
Thus the complete question is :
What are the three ways in which compounds differ from mixtures?
How do large bodies of water exchange thermal energy with air masses and nearby land?
Answer: When water molecules are heated up, they exchange freely with the air in a process called evaporation.
Explanation:
The ocean water is constantly evaporating, increasing the temperature and humidity of the surronding air to form rain and storms that are then carried by trade winds. hope this helps<3
What is the name of the region of the atom where the protons and neutrons are found?
The region of the atom where the protons and neutrons are found is called the nucleus.
What is proton?
Proton is a subatomic particle with a positive charge and is a part of an atom's nucleus. It is one of the main components of an atom, along with neutrons and electrons. The number of protons in the nucleus of an atom determines its chemical identity. Protons have a significant role in chemical reactions, as they are responsible for the formation of chemical bonds with other elements. Protons interact with other particles through the electromagnetic force, and their presence creates a positive charge which attracts negatively charged particles. This attraction is key for the formation of molecules and other chemical structures.
Therefore, The region of the atom where the protons and neutrons are found is called the nucleus.
To learn more about proton
Here: https://brainly.com/question/19332997
#SPJ4
he chart shows the movement of a ball after several seconds. A 2-column table with 4 rows. The first column labeled A has entries 0, 4, 8, 12, 16. The second column labeled B has entries 0, 2.5, 6, 8, 10. Column A is on the x-axis, and Column B is on the y-axis. Which titles should replace A and B?
The chart is showing the position -time graph of the movement of ball. The x-axis represents the time of travel and y-axis represents the position of the ball with respect to the time.
What is position -time graph ?The position - time graph is plotting the position of a moving object in with respect to different time. From this plot we can easily understand the displacement by an object. Similarly we can determine the speed of the object from the slope of the line.
The position is expressed in meters and the time is expressed in seconds. If the plot shows a linear curve, then the object is moving with constant speed.
Here, the position of the moving ball is given in y-axis 0, 2.5 m, 6, 8 and 10 meters with respect to the time given in x-axis as 0 ,4,8,12 and 16 seconds.
Find more on position -time graph:
https://brainly.com/question/17555746
#SPJ1
The electron configuration for magnesium is 1s2 2s2 2p6 3s2. What is the distribution of electrons in the electron shells of a magnesium atom?
The electron distribution in the electron shells of the magnesium atom is given as: 2, 8 , 2 when the electron configuration for magnesium is 1[tex]x^{2}[/tex]
2[tex]s^{2}[/tex] 2p[tex]p^{6}[/tex] 3[tex]s^{2}[/tex].
How the disrtibution of electrons happens for magnesium?
Electron distribution in a Magnesium atom's electron shells:
The electron configuration of magnesium is given by the number of electrons in the magnesium atom, which is 12 electrons.The first two electrons have been introduced into the orbital, which can hold two electrons.The further two electrons moves on to the 2s orbitals of magnesium.The following six electrons will enter an 2p orbital that can hold up to six electrons.The remaining two electrons can then be placed in the 3s subshell.As a result, the electron distribution in the electron shells of the magnesium atom is given as: 2, 8, 2.
To learn more about electron configuration, visit: https://brainly.com/question/26084288
#SPJ4
Glycolysis group of answer choices a)does not require o2 to generate energy. b)requires o2 to generate energy. c)is inhibited by o2. d)rate is increased in the presence of o2.?
Glycolysis is the process ,the correct option is a)does not require O₂ to generate energy.
The initially process start with the breaking down of the glucose to release energy for the cell metabolism is known as glycolysis. The energy consuming phase and the energy releasing phase make up the glycolysis. One 6 carbon glucose molecule will undergoes the glycolysis process in the cytoplasm, where it will oxidized to produce the two 3 carbon pyruvate molecules. The Glycolysis is the linear metabolic pathway of the enzyme catalyzed reactions.
Thus the glycolysis is the process that does not require O₂ to generate energy.
To learn more about glycolysis here
https://brainly.com/question/30320769
#SPJ4
State four factors to be considered when selecting a site for a fishpond
Type of soil Topography. water sources When choosing a location for a fishpond, four considerations, including proximity to the homestead and accessibility, should be taken into account.
Describe what water is ?In its gaseous, liquid, and solid phases, water is a material made up of the elements hydrogen and oxygen. It is among the most common and necessary chemicals. At normal temperature, it is an odorless, tasteless liquid with the significant property of dissolving many other compounds.
Why is water essential?Ensure a constant temperature. joints with lubricant and padding. Keep you spinal cord or other delicate tissues safe. Utilize urination, sweating, and bowel motions to eliminate waste.
To know more about water visit:
https://brainly.com/question/28465561
#SPJ1
What is the formula mass of CuSO4?
Copper Sulfate (CuSO4) has a formula mass of 159.60 g/mol.
What is Copper Sulfate?A fungicide, herbicide, and algaecide, copper sulphate is a blue crystalline substance. CuSO4 is its chemical name, and it is made up of copper, sulphur, and oxygen.
Additionally, copper sulphate is utilised for metal recovery, colouring, and electroplating. It can be hazardous to both people and animals in excessive amounts.
How can you determine it?It is determined by multiplying the atomic masses of all the formula's constituent elements. CuSO4, or one atom of copper (Cu), one atom of sulphur (S), and four atoms of oxygen, is the formula for copper sulphate (O). Copper has an atomic mass of 63.55 g/mol, sulphur has a mass of 32.06 g/mol, and oxygen has a mass of 16.00 g/mol. Thus, the mass of CuSO4 can be determined using the following formula:
159.60 g/mol is equal to 63.55 g/mol of copper, 32.06 g/mol of sulphur, 4 times 16.00 g/mol of oxygen, and 32.06 g/mol of sulphur.
Thus, 159.60 g/mol is the formula mass for copper sulphate.
To know more about copper sulphate, visit:
https://brainly.com/question/30128472
#SPJ4
how does this compare to the overall reaction for cellular respiration
The respiration of cells Glycolysis is the process by which glucose is converted into carbon dioxide and water during cellular respiration. The energy-carrying molecule ATP absorbs the reaction's produced energy (adenosine triphosphate).
What is the overall process of cellular respiration?Cells turn sugars into energy through a process called cellular respiration. Cells need fuel and an electron acceptor to power the chemical process that converts energy into usable forms, such as ATP and other forms of energy to power cellular reactions.
Therefore, Water and carbon dioxide are changed into oxygen and glucose during photosynthesis. The plant consumes glucose and produces oxygen as a by-product.Cellular respiration results in the conversion of oxygen and glucose into water and carbon dioxide.
Learn more about cellular respiration here:
https://brainly.com/question/29760658
#SPJ4
a student mixes 10.0ml sample of 1.0m naoh with a 10.0 ml sample of 1.0m hcl in a polystyrene container. the temperature of the solutiosn before mixing was 20.0 c. if the final temperature of the mixture is 26.0 c, what is the experimental value of
The experimental value of the reaction could be calculated by determining the heat of reaction or the enthalpy change (ΔH) of the reaction and was found to be -502.72 J
The experimental value of the reaction can be calculated by determining the heat of reaction or the enthalpy change (ΔH) of the reaction between sodium hydroxide (NaOH) and hydrochloric acid (HCl). ΔH is defined as the change in heat energy that occurs when a reaction takes place. In this case, the reaction between NaOH and HCl is an exothermic reaction, meaning it releases heat. The experimental value of ΔH can be calculated using the equation:
Enthalpy change, ΔH = (mass of solution) x (specific heat capacity of solution) x (change in temperature)
Given that the reaction involves 10.0 mL of each solution and the change in temperature is 26.0°C - 20.0°C = 6.0°C, the experimental value of ΔH can be calculated as:
Enthalpy change, ΔH = (20.0 mL) x (4.18 J/g°C) x (6.0°C) = 502.72 J
Note: The specific heat capacity of water (4.18 J/g°C) was used as an approximation for the specific heat capacity of the solution.
Therefore, the experimental value of the reaction is -502.72 J, indicating that the reaction releases heat energy.
To know more about enthalpy, click here: https://brainly.com/question/4086675
#SPJ4
which of the following thermodynamic values describes an exergonic reaction? ∆g = - 43 kcal/mol ∆s = - 5 cal/mol*k ∆h = 10 kcal/mol ∆g = 27 kcal/mol
An exergonic reaction is characterized by a negative Gibbs free energy change (∆G). Therefore, the value that describes an exergonic reaction is ∆G = - 43 kcal/mol.
Exergonic reactions are those in which the Gibbs free energy drops and energy is released as heat, light, or work. In an exergonic reaction, the value of G is negative, indicating that the reactants possess more free energy than the products. The reaction is referred to as spontaneous when G is negative and can take place without the use of external energy.
The Gibbs free energy rises and the G value is positive, in contrast, in endergonic reactions. In order for these reactions to take place, energy from the environment must be added.
To know more about exergonic reaction click here:
brainly.com/question/11064909
#SPJ4
The neutral atoms of all of the isotopes of the same element have:
a) different numbers of protons.
b) an equal number of neutrons.
c) the same number of electrons.
d) the same mass numbers.
e) the same masses.
The neutral atoms of all of the isotopes of the same element have:
C) the same number of electrons
Isotopes are atoms of the same element that have different numbers of neutrons in their nuclei, but the same number of protons. This means that isotopes have the same atomic number, which determines the element to which they belong, but different mass numbers.
The other answers are incorrect for the following reasons.
a. This is incorrect because all atoms of the same element have the same number of protons.
b. This is incorrect because isotopes of the same element have different numbers of neutrons. The definition of isotopes is atoms of the same element having different numbers of neutrons.
c. This is incorrect because the mass numbers of the different isotopes will differ. The mass number is the sum of the protons and neutrons in the nucleus of an atom. Since isotopes of the same element have different numbers of neutrons, the mass numbers will differ.
d. This is incorrect because the mass of the different isotopes will differ. Neutrons have mass. Therefore, atoms that have different numbers of neutrons will have different masses.
Therefore, The neutral atoms of all of the isotopes of the same element have:
C) the same number of electrons
To know more about isotopes refer to:
brainly.com/question/21536220
#SPJ4
How many moles of solid Ba(NO3)2 should be added to 300. mL of 0.20 M Fe(NO3)3 to increase the concentration of NO3 1- ion to 1.0 M? (Assume that the volume of the solution remains constant)
The number of moles of the solid Ba(NO₃)₂ added to the 300 mL of the 0.20 M Fe(NO₃)₃ to increase the concentration of NO₃⁻¹ ion to 1 M is 0.06 mol
The number of Fe(NO₃)₃ = molarity × volume
The number of Fe(NO₃)₃ = 0.20 × 0.300
The number of Fe(NO₃)₃ = 0.06 mol
Moles of NO₃⁻¹ = 0.18 mols present
Moles of NO₃⁻¹ need = 1 × 0.300 L
Moles of NO₃⁻¹ need = 0.300 mol
Number of moles he have = 0.300 - 0.180
= 0.120 mol
Ba(NO₃)₂ contains 2 moles of NO₃⁻¹, therefore number of moles of Ba(NO₃)₂ added :
Moles of Ba(NO₃)₂ = 0.120 / 2 = 0.06 mol
To learn more about moles here
https://brainly.com/question/14989103
#SPJ4
what is the osmolarity of a solution with a total volume of 2.5 liters is composed of 31.4 grams of na2s in water
a. Molarity of this solution?
b. Osmolarity of the solution c. The % mass/volume of this solution?
a. Molarity: 0.512 M
b. Osmolarity: 1.024 Osm
c. % mass/volume: 0.69 %
a. Molarity: Molarity is a measure of the concentration of a solute (salt, in this case) in a solution, expressed as moles of solute per liter of solution. To find the molarity, we need to divide the number of moles of solute (Na2S) by the volume of solution (2.5 liters):
moles of solute = 31.4 g / (mol weight of Na2S) = 31.4 g / 142.1 g/mol = 0.22 moles
Molarity = moles of solute / liters of solution = 0.22 moles / 2.5 liters = 0.512 M
b. Osmolarity: Osmolarity is a measure of the total concentration of solutes in a solution. It considers the number of particles that are produced when the solute dissociates in solution. In this case, Na2S dissociates into 2 sodium ions (Na+) and 1 sulfide ion (S2-), so the osmolarity of the solution is 2 times the molarity:
Osmolarity = 2 x Molarity = 2 x 0.512 M = 1.024 Osm
c. % mass/volume: This is a measure of the concentration of a solute in a solution, expressed as the mass of solute in grams per 100 ml of solution. To find the % mass/volume, we need to divide the mass of solute (31.4 g) by the volume of solution (2.5 liters) and multiply by 100:
% mass/volume = (mass of solute / volume of solution) x 100 = (31.4 g / 2.5 L) x 100 = 1,256 g/L x 100 = 126,560 g/L = 126.56 g/L = 0.69 %
To know more about chemical calculations here:
https://brainly.com/question/12694842#
#SPJ11
think critically the mendeleev and moseley periodic charts have gaps for undiscovered elements. why do you think the chart used by moseley was more accurate at predicting where new elements would be placed?
The chart used by moseley was more accurate at predicting where new elements would be placed, because Moseley's work chart based the atomic number which is definable property, measurable through experimentation not chemical properties or atomic mass as mendeleev do.
In his periodic table, Mendeleev left some notable gaps, such as the gaps just below aluminum and silicon, which covered elements as yet to be discovered. When these elements were later discovered, the properties of the new elements were found to match Mendeleev's predictions. The main difference between Mendeleev's and Moseley's arrangement of the elements on the periodic table is that Mendeleev arranged the elements in ascending order of atomic weight, whereas Moseley arranged them in ascending order of atomic number. Moseley diagrams were based on the use of atomic numbers rather than chemical properties of the elements. The similarity of products from the same period often caused problems when creating orders. Moseley's work made it possible to change atomic number from an arbitrary choice to a definable property that can be measured through experimentation.
To learn more about periodic table, refer:
https://brainly.com/question/1173237
#SPJ4
What is the minimum number of grams of CO require
produce 88 grams of CO2?
A) 28 g
B) 88 g
C) 64 g
D) 56 g
Answer:
The minimum number of grams of CO require
produce 88 grams of CO2 is 64 g.
Explain why iron from the blast furnace is harder than pure iron .
Iron produced in a blast furnace is harder than pure iron due to the presence of impurities and the way it is produced.
What happens in a blast furnace?In a blast furnace, iron ore is reduced to iron using coke as a reducing agent and a source of carbon. The high temperatures involved in this process result in the formation of a cast iron product that contains carbon and other impurities in the form of carbides and other compounds.
The presence of carbon and other impurities in the iron makes it harder and stronger than pure iron, which is relatively soft and ductile. The carbides formed during the reduction process act as tiny cutting edges, strengthening the iron and increasing its hardness.
This hardened iron is then melted and poured into molds to form pig iron, which can then be further processed to remove impurities and refine its properties. The end result is a stronger and harder iron product that is better suited for various applications, such as construction or manufacturing.
Learn more on blast furnace here: https://brainly.com/question/4259456
#SPJ1
which one of the following is true of trnas? a. each trna binds specific amino acid b. trnas are double stranded c. trnas have special sequences called codons d. there are four types of trnas
Statement (a) each tRNA binds specific amino acid is true.
tRNA stands for transfer RNA, and it plays a crucial role in the process of protein synthesis by carrying specific amino acids to the ribosome, where they are assembled into a protein. Each tRNA molecule is specifically designed to bind with one specific amino acid, and it has a specific anticodon sequence that allows it to recognize and bind with a specific codon in the messenger RNA (mRNA). This ensures that the correct amino acid is incorporated into the growing protein chain in the correct order.
b. trnas are double stranded is false.
tRNA is a single-stranded RNA molecule.
c. trnas have special sequences called codons is false.
tRNA molecules have anticodons, not codons.
d. there are four types of trnas is false.
There are many different types of tRNA molecules, each of which is specific to a particular amino acid. It is estimated that there are about 20-30 different types of tRNA molecules in a typical eukaryotic cell, depending on the organism.
Learn more about eukaryotic cell here:
https://brainly.com/question/29512671
#SPJ4
what intermolecular forces are present in carbon tetrafluoride, cf4?
The intermolecular forces are present in the carbon tetrafluoride, CF₄ is the london dispersion forces.
The carbon tetrafluoride is the nonpolar molecule and the nonpolar molecule exerts the London dispersion force is the only intermolecular force. Therefore the only London dispersion force will be present in the carbon tetrafluoride compound. The london dispersion force is the force that occur between the atom or the molecules that are electrically symmetric. The dipole - induced dipole attraction is called as the london dispersion force. The london dispersion force is weaker than the hydrogen bonding.
Thus, the london dispersion force is present in the carbon tetrafluoride , CF₄.
To learn more about intermolecular force here
https://brainly.com/question/3935416
#SPJ4
what condition is necessary for an electric charge to have a magnetic field around it?
The condition is necessary for an electric charge to have the magnetic field around it is that it must be moving.
A magnetic field will be created when an electric charge must be moving. When an electric current passes through the wire , the circular magnetic field is created around it. The Magnetic fields can be exert the force on an electric charge, when it is moving, only a moving charge will generates a magnetic field. A magnetic field is type of field that explains the magnetic effect on the moving charges, the magnetic materials and the electric currents.
Thus, when the electric charge is moving it will generates the magnetic field around it.
To learn more about electric charge here
https://brainly.com/question/1414454
#SPJ4
give a systematic name for the following formula: [cr(nh3)6][cr(cn)6]
So, the complex compound's IUPAC name will be hexaamminechromium (III) trioxalatocobaltate (III)
What is the [CO NH3 6 Cr CN 6] compound's coordination isomer?Which sort of isomerism is represented by the comlexes [Co(NH 3) 6] [Cr(CN) 6] and [Cr(NH 3) 6] [Cr(CN) 6]? Solution: The coordination compound displays coordination isomerims when both the cation and anion are complex ions. The instances provided are thus examples of coordination isomerism.
Does Cr NH3 6 Co CN 6 constitute a Coordination Complex compound?The complexes [Cr(NH3)6][Co(CN)6] and [Cr(NH3)6][Co(CN)6] are instances of coordination isomerism. Only in complexes where both the cation and the anion are complexes does this isomerism occur. A ligand exchange between a cation and an anion is what causes it to happen.
To learn more about coordination isomerims here:
https://brainly.com/question/13428382
#SPJ4
What data will you graph to answer the question independent variable dependent variable?
You draw a graph with the variable on the y-axis and the independent variable on the x-axis to solve this problem.
What is a graph, exactly?In mathematics, a graph is a pictorial display or diagram that shows facts or quantities in an ordered way. The relationships across two or more items are frequently represented by the lines on a graph.
What functions do graphs serve?Graphs and graphs are useful visual aids when they make information accessible and easy to understand. Thus, it is not unexpected that both print and digital media employ graphs. When data is displayed as a graph rather than a table, it can often be simpler to comprehend since the graph may show a pattern or comparative.
To know more about graph visit:
https://brainly.com/question/2275401
#SPJ4
Name the following compound: 2-ethyl-4-methylheptene 3,5-dimethyl-2-octene 2-ethyl-4-methylheptane 3-methyl-5-propyl-2-hexene
3,5-dimethyl-2-octene
Describe the structure of 3,5-dimethyl-2-octene?Based on which parent chain has the largest value, it will be selected. If we count in this instance from top to bottom, we'll receive seven carbons, but if we start counting from the second carbon and go left and then down, we'll get eight carbons. Thus, octane is the parent chain. The methyl groups are found on carbons 3 and 5, whereas the double bond is situated at the second carbon. Since there are two methyl groups present, we prefix methyl with di- to denote the presence of two methyl groups.The functional group must be given priority and must be included in the parent chain. The double bond serves as the functional group in this instance. (alkene)
To know more about 3,5-dimethyl-2-octene, visit:
https://brainly.com/question/13580842
#SPJ4
According to the question the compound name is 3,5-dimethyl-2-octene
Describe the structure of 3,5-dimethyl-2-octene?Based on which parent chain has the largest value, it will be selected. If we count in this instance from top to bottom, we'll receive seven carbons, but if we start counting from the second carbon and go left and then down, we'll get eight carbons. Thus, octane is the parent chain. The methyl groups are found on carbons 3 and 5, whereas the double bond is situated at the second carbon. Since there are two methyl groups present, we prefix methyl with di- to denote the presence of two methyl groups. The functional group must be given priority and must be included in the parent chain. The double bond serves as the functional group in this instance. (alkene)
To know more about 3,5-dimethyl-2-octene, visit:
brainly.com/question/13580842
#SPJ4
What is the concentration of a solution made by diluting 5mL of a 0.250m stock is to a volume of 30mL
Answer: 0.04167m
Explanation:
By using M1V1=M2V2
Let M1 = 0.250m
M2 = x
V1 = 5mL
V2 =30mL
(0.250)(5) = (M2)(30)
M2 = 0.04167m
The direct transfer of phosphate between substrates is called?
The direct transfer of phosphate between substrates is called substrate-level phosphorylation.
Substrate-Level Phosphorylation: The Direct Transfer of Phosphate Between SubstratesThis type of reaction occurs when a phosphate group is transferred from a donor molecule to ADP to form ATP. This process is catalyzed by enzymes such as pyruvate kinase and glyceraldehyde 3-phosphate dehydrogenase, which use the energy from the donor molecule to facilitate the transfer.
Substrate-level phosphorylation is a key component of metabolic pathways, such as glycolysis and the citric acid cycle. Substrate-level phosphorylation reactions are important because they generate high-energy compounds like ATP, which can be used to power cellular activities.
Learn more about phosphorylation at: https://brainly.com/question/14092599
#SPJ4