what is rotation and revolution

Answers

Answer 1
When an object turns around an internal axis (like the Earth turns around its axis) it is called a rotation. When an object circles an external axis (like the Earth circles the sun) it is called a revolution.

Related Questions

When the interval between the stimuli decreases, _______.
A. a second action potential is generated until the interval reaches the absolute refractory period
B. a second action potential is generated regardless of the stimulus and the interval
C. a second action potential is generated until the interval reaches the relative refractory period
D. a second action potential is generated as long as the stimulus is above threshold

Answers

Answer:

The correct option is A. a second action potential is generated until the interval reaches the absolute refractory period.

Explanation:

The inter-stimulus interval (ISI) is the temporal interval between two successive stimuli, measured from the offset of the first stimulus to the commencement of the second.

A cell's refractory period is the time during which it is unable to replicate an action potential. Therefore, the absolute refractory period is the amount of time it takes for a second action potential to be initiated, regardless of how large a stimulus is applied repeatedly.

A second action potential is generated when the gap between the stimuli decreases until the interval reaches the absolute refractory period.

Therefore, the correct option is A. a second action potential is generated until the interval reaches the absolute refractory period.

That is, when the interval between the stimuli decreases, a second action potential is generated until the interval reaches the absolute refractory period.

7) List three (3) automobile safety features currently used to minimize the risk of injury to its passengers. Relate these
safety features to your egg drop design.

Answers

seatbelt- strapped in egg
air bag- cushion around the egg
brakes- parachute(bag that helps the egg go down slower)

Difference between cold and warm blooded animal.

Answers

Answer:

Cold blooded animals are those animals that cannot regulate their body temperature and their temperature keeps changing according to their environment. ... Warm blooded animals are the animals that have a constant body temperature and can easily adapt to extreme temperatures as they can regulate their body temperature.

Which property of an object determines the strength of the buoyant force acting on the object in a fluid? A) weight B)surface area C) volume​

Answers

I think it’s c I’m not always right

A car is travelling at 60m/s. and brakes to a speed of 14m/s, in 2.7 seconds. What is the deceleration?​

Answers

Answer:

by using v = u + at equation we can find "a"

14 = 60 - 2.7a

2.7a = 60 - 14

2.7a = 46

decceleration = 17.03

which force is responsible for the moon revolving around the sun?​

Answers

Gravitational attraction

what is the formula to calculate liquid pressure?/

Answers

1. set up the equation

2. multiply the variables

3. analyze your results

P = pgh

P: fluid pressure
p: fluid density
g: acceleration due to gravity
h: fluid depth

what is the car's average velocity

Answers

Answer:

vận tốc bằng quãng đường chia thời gian

Explanation:

v=s/t

plz help me yesterdays answer was wrong....
Name the Thermal expansion of fluids such as liquid and gas​

Answers

Answer:

water

mercury in thermometer

volume gas thermometer

jar lids

power lines


A body of mass 5 kg moving with velocity 10m/s attains a velocity of 30m/s in 20 seconds, after applying the force. The amount of force applied will be:


a 10N

b 20N

c 5N

d 15N​

Answers

Answer↷

c) 5N

➦I hope it seemed helpful to you!

what is the difference between torque and the moment of a force ​

Answers

Answer:

Torque Of a Force: If The Force has tendency or Bends The Body about Longitudinal axis of the Body it is Torque. Moment Of a Force :If Force has Tendency to or Rotates the Body about Transverse asis the Body It is Moment .

Explanation:

As you slide a heavy box across the floor, friction applies a force of -100 N
over a distance of 5 m. How much work is done by friction?
A. -500 J
B. -20 j
C. -100 J
D. -95 J

Answers

Answer:

A -500J

Explanation:

because W=Fs

100 × 5 = 500

The work done by friction is 500 J.

What is friction?

Friction is the force resisting the relative motion of solid surfaces, fluid layers, and material elements sliding against each other.There are several types of friction:

Dry friction is a force that opposes the relative lateral motion of two solid surfaces in contact. Dry friction is subdivided into static friction ("stiction") between non-moving surfaces, and kinetic friction between moving surfaces. With the exception of atomic or molecular friction, dry friction generally arises from the interaction of surface features, known as asperities

Fluid friction describes the friction between layers of a viscous fluid that are moving relative to each other.

Lubricated friction is a case of fluid friction where a lubricant fluid separates two solid surfaces.Skin friction is a component of drag, the force resisting the motion of a fluid across the surface of a body.

Internal friction is the force resisting motion between the elements making up a solid material while it undergoes deformation.

When surfaces in contact move relative to each other, the friction between the two surfaces converts kinetic energy into thermal energy (that is, it converts work to heat).

Learn more about friction

https://brainly.com/question/1424758

#SPJ2

Calculate the power of a train that uses 2MJ of chemical energy in 4
seconds.

Answers

Answer:

500 kW

Explanation:

Given that,

Energy of the train, E = 2 MJ = 2×10⁶ J

Time, t = 4 seconds

We need to find the power of the train. We know that,

Power = energy/time

So,

[tex]P=\dfrac{2\times 10^6}{4}\\\\P=500000\ W\\\\or\\\\P=500\ kW[/tex]

So, the power of the train is equal to 500 kW.

I need help with this someone help me?

Answers

graph A so answer B also why isn’t answer a with graph A and B with graph B etc like that’s just confusing lol

In the picture below, a car hits a wall. Using what you know about Newton’s Third Law, which is true?

The force of the wall on the car and the car on the wall are equal

The force of the wall on the car is greatest

The force of the car on the wall is greatest

There is not enough information to tell

Answers

Answer:

A...................................

The force of the wall on the car and the car on the wall are equal is true about Newton’s Third Law. Option A is the correct answer.

According to Newton's Third Law of Motion, for every action, there is an equal and opposite reaction. This means that if the car hits the wall, there will be a force exerted by the car on the wall, and an equal and opposite force exerted by the wall on the car. Option A is the correct answer.

The forces involved in the interaction between the car and the wall are equal in magnitude but opposite in direction, as dictated by Newton's Third Law. Newton's Third Law of Motion states that for every action, there is an equal and opposite reaction. This means that when an object exerts a force on another object, the second object exerts a force of equal magnitude but in the opposite direction on the first object.

Learn more about Newton here:

https://brainly.com/question/28171613

#SPJ2

The complete question is, "In the picture below, a car hits a wall. Using what you know about Newton’s Third Law, which is true?

a. The force of the wall on the car and the car on the wall are equal

b. The force of the wall on the car is greatest

c. The force of the car on the wall is greatest

d. There is not enough information to tell"

What is the work input to lift a box of 810 with a 50% mechanical efficiency?

Answers

Answer:

Work input = 1620

Explanation:

Given the following data;

Work output = 810

Efficiency = 50%

To find the work input;

Mathematically, efficiency is given by the formula;

[tex] Efficiency = \frac {Out-put \; work}{In-put \; work} * 100 [/tex]

Substituting into the formula, we have;

[tex] 50 = \frac {810}{WI} * 100 [/tex]

Cross-multiplying, we have;

[tex] 50I = 810 * 100 [/tex]

[tex] 50I = 81000 [/tex]

[tex] WI = \frac {81000}{50} [/tex]

Work input = 1620

how does an atom change if all of its electons are removed

a. the atom’s volume increases
b. the atom’s mass increases
c. the atom becomes positively charged
d. the atom becomes negatively charged

Answers

Answer:

c

Explanation:

Have a nice day

answer is c

(c)

Explanation:

is (c)

it is c

Accelaration is a derived quantity .Give reason

Answers

Answer:

The accerlation is a derived from the other quantities like change in velocity/time take etc.

pleaase help me i don't know this !!!

Answers

Answer:

coefficient=1.09N/m×g

coefficient=1.09N/0.413g×10m/s square

coefficient=1.09N/4.13N

coefficent=0.263

f= uK

here f is force, u is cofficient of friction , k is normal force

k = mg

f = umg

1.09 = u × 0.41 × 10

u = 1.09 ÷ 4.1

u = 0.26

Charge is distributed uniformly throughout the volume of an infinitely long solid Cylinder of radius R what is the electric field when r < Select one : O a . Zero O b . E = / 2 € d . E = pr / 2 € O e . E = / 2 €

Answers

Solution :

Let us consider the Gaussian surface that is in the form of a cylinder having a radius of r and a length of A which is [tex]$\text{coaxial with the charged cylinder}$[/tex].

The charged enclosed by the cylinder is given by,

[tex]$q=\rho V$[/tex]       (here, V = [tex]$\pi r^2l$[/tex]  is the volume of the cylinder)

  [tex]$=\pi r^2lp$[/tex]    

If [tex]$\rho$[/tex] is positive, then the electric field lines moves in the radial outward direction and is normal to Gaussian surface which is distributed uniformly.

Therefore, total flux through Gaussian cylinder is :

[tex]$\phi=EA_{cyl}$[/tex]

   [tex]$=E(2\pi rl)$[/tex]

Now using Gauss' law, we get

[tex]$2\pi \epsilon_0rlE = \pi r^2lp$[/tex]

or [tex]$E=\frac{\rho r}{2 \epsilon_0}$[/tex]

Therefore, the electric field is [tex]$E=\frac{\rho r}{2 \epsilon_0}$[/tex]

Hence, option (d) is correct.

I need this now

On the planet Xenos, an astronaut observes that a 2.0 m long pendulum has a period of 2.2 s.
What is the free-fall acceleration on Xenos? *

Answers

Answer:

[tex]g=16.31\ m/s^2[/tex]

Explanation:

Given that,

The length of the pendulum, l = 2 m

The period of the pendulum, T = 2.2 s

The formula for the time period of a pendulum is given by :

[tex]T=2\pi \sqrt{\dfrac{l}{g}}[/tex]

or

[tex]T^2=4\pi ^2\dfrac{l}{g}\\\\g=\dfrac{4\pi ^2l}{T^2}\\\\g=\dfrac{4\pi ^2\times 2}{(2.2)^2}\\\\g=16.31\ m/s^2[/tex]

So, the free fall acceleration is [tex]16.31\ m/s^2[/tex].

Magnets are formed from iron, nickel, or cobalt when the ______________________ line up in the same direction.

Answers

Answer:

electrons

In substances such as iron, cobalt, and nickel, most of the electrons spin in the same direction. When you rub a piece of iron along a magnet, the north-seeking poles of the atoms in the iron line up in the same direction. The force generated by the aligned atoms creates a magnetic field, hence it acts as a magnet.

the materials that can be magnetized this way are called ferromagnetic materials, but it is not permanent and after some times it loses all the magnetic properties.

please if you find this answer helpful mark it as brainliest

Magnets are formed from iron, nickel, or cobalt when the electrons in their atoms' outer energy levels line up in the same direction that is present in Option A, as the alignment creates a magnetic field that can attract or repel other magnets or magnetic materials.

What are magnets?

At the atomic level, electrons orbit the nucleus in shells or energy levels, and electrons have a property called spin, which creates a tiny magnetic field around them. Normally, electrons in an atom have random spin directions, so their magnetic fields cancel each other out and the atom has no overall magnetic field. In some materials, such as iron, nickel, and cobalt, the electrons in the outer energy level can line up in the same direction, creating a net magnetic field. This is known as ferromagnetism.

Hence, magnets are formed from iron, nickel, or cobalt when the electrons in their atoms' outer energy levels line up in the same direction that is present in Option A,

Learn more about the magnets here.

https://brainly.com/question/13026686

#SPJ3

question is incomplete, complete question is below

Magnets are formed from iron, nickel, or cobalt when the ______________________ line up in the same direction.

A)electrons in their atoms' outer energy levels

B)proton explodes

Señalar la importancia de las capacidades fisico-motiz que se desarrollan en el futbol de salon y dar un ejemplo para cada uno

Answers

La respuesta correcta para esta pregunta abierta es la siguiente.

A pesar de que no anexas opciones o incisos para responder, podemos comentar lo siguiente.

La importancia de las capacidades físico-motriz que se desarrollan en el futbol de salón son determinantes para desarrollar o maximizar las actividades propias de este deporte con objeto de rendir al máximo y aspirar al mejor de los resultados.

Estas capacidades físico-motrices son las que le permiten a un jugador realizar su máximo esfuerzo, mejorar su desempeño físico y conseguir resultados positivos.

Estamos hablando de la fuerza, la velocidad y la resistencia.

La velocidad es la aceleración que el jugador de futbol necesita para aumentar su velocidad de un punto A, a un punto B, en el menor tiempo posible.

La resistencia es la capacidad del jugador de futbol para mantener ese nivel de aceleración y desempeño, sin bajar su rendimiento. Su capacidad física debe ser resistente para ser constante en su rendimiento físico.

La fuerza es la potencia con la que desempeña los movimiento físicos dentro de la cancha.

The amount of work required to increase the distance between -6μC and 4μC from 6 cm to 18 cm will be

Answers

Answer:

W = 1.8 J

Explanation:

The amount of work required to move the given charges can be found by using the following formula:

[tex]W = \frac{kq_1q_2}{\Delta r} \\\\[/tex]

where,

W = Work done = ?

k = Colomb's constant = 9 x 10⁹ Nm²/C²

q₁ = magnitude of first charge = 6 μC = 6 x 10⁻⁶ C

q₂ = magnitude of second charge = 4 μC = 4 x 10⁻⁶ C

Δr = change in distance = 18 cm - 6 cm = 12 cm = 0.12 m

Therefore,

[tex]W = \frac{(9\ x\ 10^9\ Nm^2/C^2)(6\ x\ 10^{-6}\ C)(4\ x\ 10^{-6}\ C)}{0.12\ m}[/tex]

W = 1.8 J

How does Newton's third law explain how a rocket is launched upward?

Answers

Answer:

At lift-off, hot burning gas is pushed downwards by the rocket motors. The hot gas pushes back on the rocket in an upwards direction. When this upwards push, or thrust, exceeds the weight of the rocket, the forces acting on the rocket are unbalanced and the rocket accelerates upwards

Explanation:

Answer:

A. Gases from burning fuel are pushed out of the bottom of the rocket, and these gases push back on the rocket with an equal amount of force.

Explanation:

1. Compared to most other metals, what properties do the alkali metals have? А low melting points and high densities B low melting points and low densities C high melting point and high densities D high melting points and low densities​

Answers

Answer:

B. low melting points and low densities

Explanation:

Alkali metals are any of the monovalent elements found in Group IA of the periodic table. They readily lose their one valence electron to form ionic compounds with nonmetals. Examples of alkali metal are Potassium (K), Lithium (L), and Sodium (Na).

Compared to most other metals, the chemical properties that alkali metals have are low melting points (28.5°C) and low densities that is typically less than 1 grams per cubic centimeters.

A 1500 kg truck travelling north at 60 km/hr collides with a 1200 kg car moving east at 15km/hr. If the two cars remain locked together after impact, with what velocity do they move immediately after the collision.​

Answers

Answer:

33.33j+6.67i km/hr

Explanation:

From the law of conservation of momentum,

Applying,

mu+m'u' = V(m+m')............... Equation 1

Where m = mass of the truck, m' = mass of the car, u = initial velocity of the truck, u' = initial velocity of the car, V = Final velocity.

Note: let j represent the north, and i  represent the east

From the question,

Given: m = 1500 kg, u = 60j, m' = 1200 kg, u' = 15i

Substitute these values into equation 1

1500*60j+1200*15i = V(1500+1200)

90000j+18000i = 2700V

V = (90000j+18000i)/2700

V = 33.33j+6.67i km/hr

Look at the image of a sports car. It has less resistance than a normal car because it is. What word fills the gap?

Answers

Answer:

It is streamlined

Explanation:

The speed of a car as well as its air resistance and fuel consumption has a lot to do with its shape.

A car that is streamlined glides through air with less resistance, moves with a higher speed and consumes less fuel.

The essence of streamlining is to reduce the aerodynamic drag on the car thereby increasing its speed, decreasing its air resistance and fuel consumption.

Answer:

it is streamlined

Explanation:

a car travelled at 50km/hr for 3 hours, how far did the car travel

Answers

Answer:

The answer answer is 150 km

Answer:

Explanation:

Distance =Speed×time

Speed=50km/hr

Time=3hours

Hence the Distance will be(50km/hr×3hours)

The answer is 150km

Which of the following are correct statements about the way an atom is put
together?
Check all that apply.
A. The valence shell is the innermost shell of electrons in an atom.
B. Electrons are found in the nucleus of an atom.
O C. There are two electrons in all electron shells.
O D. Electrons are in layers around the nucleus.
***** multiple choice ******

Answers

Answer:

valenc e shell

Explanation:

Other Questions
Can someone help me with this. Workshop taking shaper Write a paragraph about a city you have been to. Write about these things. - how you got there why you went there -what you did when you were there Write at least 50-80 words if a triangle has one angle that measure 81 degrees and another that measures 47 degrees, what is the measure of the third angle? Use the following abbreviations to indicate the journal in which you would record transactions a through n.a. Cash purchase of merchandise inventory b. Collection of dividend revenue earned on an investment c. Prepayment of insurance d. Borrowing money on a long-term note payable e. Purchase of equipment on account f. Cost of goods sold along with a credit sale g. Cash sale of merchandise inventory h. Payment of rent i. Depreciation of computer equipment j. Purchase of merchandise inventory on account k. Collection of accounts receivable l. Expiration of prepaid insurance m. Sale on account n. Payment on account What do I reply if someone asks me " why are you so nice to me"It's not any subject it's just a question plzz answer fast -y-22-136< X/2-2I need help solving both "Describe the trends and fluctuations in the U.S. employment-to-population ratio and the labor force participation rate from 1980 to 2017. The employment-to-population ratio _______. A. fluctuates less than the labor force participation rate B. followed an upward trend before 2000 and then followed a downward trend C. increases during a recession and decreases during an expansion D. barely responded to the 2008-2009 recession" How can i speak in English better FOUR reasons why incidents of gender based violence in communities continue despite various campaigns to discourage it. the answer is either B or D On Rameshs13th birthday, his father invited all his friends and their relatives. It was a big party with lots of food and DJs. Ramesh didnt like the loud sound of DJs and asked his father to play it in a low volume so that their neighbours do not get much disturbed and people at the party can also enjoy the music. Rameshs father felt good for his wisdom and did as he said.Do you think when loud music is played at a party is acceptable to all the people living in, neighbourhood? Give a reason for your answerHow can you control noise pollution at your end? In the circle shown below, The length of chord AB is 24 and the length of OC is 5. What is the radius of the circle with center O Solve for T: 10t-4x=3S Explanation plz When solving inequality If in the numerator i had a imaginary number when factoring what should i do??? Clem is married and is a skilled carpenter. Clems wife, Wanda, works part-time as a substitute grade school teacher. Determine the amount of Clems expenses that are deductible for AGI this year (if any) under the following independent circumstances:___________a) Clem is self-employed and this year he incurred $525 in expenses for tools and supplies related to his job. Since neither were covered by a qualified health plan, Wanda paid health insurance premiums of $3,600 to provide coverage for herself and Clem (not through an exchange).b) Clem and Wanda own a garage downtown that they rent to a local business for storage. This year they incurred expenses of $1,250 in utilities and $780 in depreciation.c) Clem paid self-employment tax of $15,300 (the employer portion is $7,650), and Wanda had $3,000 of Social Security taxes withheld from her pay.d) Clem paid $45 to rent a safe deposit box to store his coin collection. Clem has collected coins intermittently since he was a boy, and he expects to sell his collection when he retires. 4 Calculate the mass of tin that can be extracted from 100 kg of tin ore that contains1% tin by mass. Calculate the mass of waste produced. What is the next term in the sequence below?0.25, 0.75, 2.25, 6.75, A. 6.25 B. 10.25 C. 20.25 D. 60.75 52. Which of the following numbering system is used by the computer to display numbers? A. Binary B. Octal C. Decimal D. Hexadecimal Es el accidente o morfema verbal que nos informa sobre el estado en que se encuentra el proceso verbal: