Answer:
Nonrenewable energy resources, like coal, nuclear, oil, and natural gas, are available in limited supplies. ... Renewable resources are replenished naturally and over relatively short periods of time. The five major renewable energy resources are solar, wind, water (hydro), biomass, and geothermal.
Explanation:
Explain the use of stem cells in the field of medicine. Give three specific examples and explain how stem cells are specifically used to treat the disease/injury
Answer:
Doctors can use stem cells to rejuvenate damaged tissue. Or, they can replace tissue lost to disease or injury. These cells are also often used to better understand different kinds of diseases, and what kind of drugs would work the best with them.
Explanation:
I hope this helps.
which term describes the interactions of an organism with the physical and biological factors in it’s environment?
A)niche
B)home
C)habitat
D)territory
Answer:
a) niche
Explanation:
4. What is the function of a mitochondrion in a cell?
packaging proteins and other materials from the endoplasmic reticulum for storage in the cell or transport out of the cell
O providing a barrier between the cell and its surroundings
assembling lipids, proteins, and other materials for export out of the cell
O converting energy from food into a form the cell can use
what are products of living things
Answer:
oxygen
Explanation:
plants
Answer:
Explanation:
"Most living things need food, water, light, temperatures within certain limits, and air. Living things have a variety of characteristics that are displayed to different degrees: they respire, move, respond to stimuli, reproduce and grow, and are dependent on their environment."
Describe two types of evidence–other than the comparison of DNA sequences–that can be used to determine the phylogeny of organisms. Discuss one strength of each type of evidence you described.
Answer: Comparing the DNA sequence of the organisms can also tell you how closely related species they are. It can give you even more information since the original DNA is how the amino acid sequence of cytochromes is coded for.
Looking at embryonic development also helps you determine the phylogeny of organisms because a way an embryo develops can be very similar to the way another species develops but then both are full-grown they look very different and its tuff to explain how close they might be related
Plants release oxygen into the
atmosphere by...
A. Splitting apart water molecules
B. Splitting apart carbon dioxide
C. Attaching water together
D. Attaching oxygen together
Answer:
A
Explanation:
Plants use water in the process of photosynthesis, (to make food) but they don't need all of it. They use carbon dioxide, the stuff people and animals breath out, and release oxygen for us to breath, then we breath out carbon dioxide again and the process happens again.
Fun fact: Did you know that rain forests make their own weather? Plants not only release oxygen into the air, but tiny droplets of water. (water vapor, and this part of the water cycle is called transpiration) Those droplets condense and form clouds. That's why it rains every day in tropical forests. Cool huh?
Why do trophic Levels from
pyramid shape
The image above shows the trophic (food) levels of the energy pyramid and the amount of biomass energy lost at each level traveling upward, resulting in the pyramid shape. Each level is the same height and the available energy is represented by the width of each level.
Testosterone is a small steroid hormone that is important in cell signaling. Which of the following indicates where testosterone enters a cell and why it is able to cross at that point?
А
1, because testosterone is nonpolar and can diffuse through the membrane.
B
2, because testosterone covalently binds to a surface protein and transports into the cell.
C3, because testosterone dissolves in water and flows through the channel
D
4, because testosterone is filtered out of the extracellular fluid and taken into the cell by endocytosis.
<
Answer:
A
Explanation:
explanation is given in answer
Testosterone is a steroid hormone. It is a primary sex hormone. It plays key role in the development of male reproductive tissues such as testes and prostate.
Testosterone is lipophilic signaling molecule. The plasma membrane consist of lipid bilayer so testosterone diffuse through the lipid bilayer and enters the cell.
So, the answer is option A because testosterone is nonpolar and can diffuse through the membrane.
other options-
B because testosterone covalently binds to a surface protein and transports into the cell- incorrect. Testosterone doesn't binds to a surface protein and transports into the cell, it diffuses through the cell membrane.
C because testosterone dissolves in water and flows through the channel-incorrect. Testosterone is nonpolar.
D because testosterone is filtered out of the extracellular fluid and taken into the cell by endocytosis-incorrect. Testosterone is not filtered out of the extracellular fluid and it is not taken into the cell by endocytosis.
Learn more about testosterone-
https://brainly.com/question/18084441?referrer=searchResults
A student wins a trophy. It is a metal cup on a black plastic base. The student cleans the trophy. She holds one of the metal handles and rubs the rest of the trophy with a dry cloth. Why the plastic base does becomes negatively charged? B) The metal cup does not become charged when she rubs the trophy. Suggest why the cup does not become charged.
Answer:
In this given statement , the plastic base becomes negatively charged because plastic is an insulator . And the metal cup does not become charged because metal is a conductor.
Explanation:
Reason behind , why plastic base becomes negatively charged -: When a plastic base is rubbed with a dry cloth in the metal trophy, electrons are shifted from one material to the other. Thus, the substance that gains electrons (which is the plastic base) becomes negatively charged. thus , the plastic is an insulator , which causes charge (negative ) by rubbing.
Reason behind , why the metal cup does not become charged -: The metal cup is a conductor, and the surplus charge on the metal flows to the person who charges the cup and to the ground so that it is not charged. Thus, rubbing a metal can trigger hand\finger injury because metals generate excess heat in rubbing .
The area where two or more plates meet is called a: a.fault b.plate edge c.plate boundary d.ring of fire explain for every answer PLEASE I NEED THIS NOW IT IS DUE TODAY!!!!!!!!!!!!!!!!!!!!!!!
Answer:
I think the answer is C. Plate Boundary
Explanation:
Can someone tell me which are true and which are false plz don’t answer if your going to be rude :/I want to go to sleep
Not gonna be rude about this, I will try to help but this isn't biology work, so you may wanna put it under history or social studies. I am trying to figure answers now.
This table shows situations that are affecting Earth’s energy balance in certain areas.
Situation Experiment
1 More clouds have formed, resulting in twenty-eight percent being reflected back to space.
2 Forty-nine percent is absorbed by the land in the area.
3 Ice has melted into deep ocean water.
4 An ice sheet has formed where water was.
5 Three percent of the energy that hits the surface is reflected back to space.
Which three situations would result in an increase in Earth’s surface temperature in that area?
1, 2, 3
2, 3, 5
3, 4, 5
1, 4, 5
Answer:
2, 3, 5
Explanation:
on Edgenuity
Answer:
The answer is B: 2,3,5
Explanation:
I hope this helps you
Identify the characteristics of life. Check all that apply.
Answer:
* Having cells
* Use energy
* Reproduce
* Respond to the environment
* grow and develop Cells
Explanation:
Answer:
-Has one cell or more
-Use energy
-Reproduce
-Grow and develop
-Respond to the environment
PLEASE HELP ASAP!!! IF YOU HELP YOUR MY BEST FRIEND!!!
can you please write a paragraph on how to write a lab report
Explanation:
A typical lab report would include the following sections: title, abstract, introduction, method, results and discussion. Title page, abstract, references and appendices are started on separate pages (subsections from the main body of the report are not).
How do you start a lab report?
Sometimes an introduction may contain background information, briefly summarize how the experiment was performed, state the findings of the experiment, and list the conclusions of the investigation. Even if you don't write a whole introduction, you need to state the purpose of the experiment, or why you did it.
Answer:
Explanation:
The title says what you did. It should be brief (aim for ten words or less) and describe the main point of the experiment or investigation. An example of a title would be: "Effects of Ultraviolet Light on Borax Crystal Growth Rate". If you can, begin your title using a keyword rather than an article like "The" or "A".
Usually, the introduction is one paragraph that explains the objectives or purpose of the lab. In one sentence, state the hypothesis. Sometimes an introduction may contain background information, briefly summarize how the experiment was performed, state the findings of the experiment, and list the conclusions of the investigation. Even if you don't write a whole introduction, you need to state the purpose of the experiment, or why you did it. This would be where you state your hypothesis.
List everything needed to complete your experiment.
Describe the steps you completed during your investigation. This is your procedure. Be sufficiently detailed that anyone could read this section and duplicate your experiment. Write it as if you were giving direction for someone else to do the lab. It may be helpful to provide a figure to diagram your experimental setup.
Data
Numerical data obtained from your procedure usually presented as a table. Data encompasses what you recorded when you conducted the experiment. It's just the facts, not any interpretation of what they mean.
Results
Describe in words what the data means. Sometimes the Results section is combined with the Discussion.
Discussion or Analysis
The Data section contains numbers; the Analysis section contains any calculations you made based on those numbers. This is where you interpret the data and determine whether or not a hypothesis was accepted. This is also where you would discuss any mistakes you might have made while conducting the investigation. You may wish to describe ways the study might have been improved.
Conclusions
Most of the time the conclusion is a single paragraph that sums up what happened in the experiment, whether your hypothesis was accepted or rejected, and what this means.
Figures and Graphs
Graphs and figures must both be labeled with a descriptive title. Label the axes on a graph, being sure to include units of measurement. The independent variable is on the X-axis, the dependent variable (the one you are measuring) is on the Y-axis. Be sure to refer to figures and graphs in the text of your report: the first figure is Figure 1, the second figure is Figure 2, etc.
Edit: A typical lab report would include the following sections: title, abstract, introduction, method, results and discussion. Title page, abstract, references and appendices are started on separate pages (subsections from the main body of the report are not). How do you start a lab report? Sometimes an introduction may contain background information, briefly summarize how the experiment was performed, state the findings of the experiment, and list the conclusions of the investigation. Even if you don't write a whole introduction, you need to state the purpose of the experiment, or why you did it.
Sorry if this isn't the answer you wanted
Biology peeps please help me
Monomers are the building blocks of larger molecules called polymers. A polymer consists of repeating monomers bonded to each other with covalent bonds.
Use the draw pad to connect each monomer to its polymer.
Answer:
Explanation: It connects to each one shown below. All correct.
The monomer of DNA is a nucleotide. The monomer of glucose is carbon, hydrogen, and oxygen.
What are monomers and polymers?The simplest form of polymers is monomers. To create polymers, each monomer is combined. Usually, a double bond or triple bond holds the monomer together.
Typically, monomers contain two free electrons that pair together and create a double bond among themselves. The monomers of cellulose are an example of a monomer and contain glucose.
A monomer is a molecule that, when combined with additional monomers of the same kind, can create a polymer, such as glucose (C6H12O6). A biological polymer made of several -glucose units is cellulose, which serves as an illustration of this.
Therefore, the monomer of DNA is a nucleotide. The monomer of glucose is carbon, hydrogen, and oxygen. The monomer of their polymers is matched in the added picture.
To learn more about monomers, refer to the link:
https://brainly.com/question/18784783
#SPJ2
What is the monomer of nucleic acids
Answer: it is Nucleotides
Explanation:
Student A sprays perfume at her seat in the front of the room. Ten minutes later Student B, at the
back, smells the perfume. Which of the following is the best explanation of the delay in Student B
smelling the perfume?
Answer:
it would be c diffusion
Which statement best describes the cell membrane of a living cell?
A) It is composed of proteins and carbohydrates
B) It has the same permeability to all substances found inside or outside the cell.
C) It is a double protein layer that doesn't allow things to pass through it.
D) It selectively regulates passage of materials into and out of the cell.
what are some ways that you use the sun’s energy on a daily basis?
Answer:
- dry clothes
- to heat your home
- to power your car
- to generate your electricity
- to grow food
Explanation
Hope this helps I just named a few
All atoms of the same element must have the same number of
protons.
neutrons.
compounds.
electrons.
the answer is protons
What does PMLU stands for
Answer:
PMLU stands for Post Mining Land Use
Explanation:
list and explain the pests of maize
Answer:
Pests of Maize and Their Control
Leaf Feeders
Corn Leaf Aphid.
Spider Mites.
Thrips.
Dingy Cutworm.
Armyworm.
Grasshopper.
Corn Flea Beetle.
Stink bug.
Explanation:
1) The property of matter that describes a solvent is mixing with a
solute to make a solution is known as
A. Contraction
B. Density
C. Solubility
D. Energy
Help!!
Answer:
C. Solubility
Explanation:
Solubility of a substance refers to the ability of a substance called the SOLUTE to dissolve in another substance called the SOLVENT to form a SOLUTION. Matter, which constitutes the solid, liquid and gaseous state, can be the solute, which will get dissolved in the SOLVENT (usually a liquid).
Therefore, according to this question, the property of matter that describes a solvent is mixing with a solute to make a solution is known as its SOLUBILITY
How are combustion,
respiration, and decomposition similar to each
other?
Answer:
The waste products of carbon dioxide and water are also formed. Combustion, which is the burning of carbon compounds, which are fossil fuels, is often compared to cellular respiration because the two processes are extremely similar. ... It's as if our bodies burn our food for energy.
Combustion, respiration and decomposition are similar to each other because they release carbon dioxide.
Combustion is the reaction that occurs between an oxidizable material and oxygen, which is revealed through flames and generates the release of energy.
The different components that are completely oxidized, gives rise to the formation of liquid water and carbon dioxide and even sulfur dioxide.
Respiration is a gas exchange system with the environment, where a fuel molecule, glucose, is oxidized.
Humans take in oxygen through inspiration and exhale carbon dioxide as a waste product produced by the body.
The decomposition of organic matter is useful for microorganisms for two reasons: as an energy supply for their growth, and as a carbon source for the formation of new cellular material.
Carbon dioxide, methane, organic acids, and alcohols are waste products released in the acquisition of energy.
Therefore, we can conclude that combustion, respiration and decomposition are similar to each other because they release carbon dioxide.
Learn more here: https://brainly.com/question/9259438
what factor helps determine gene expression
A. chemicals in the body
B. senescense
C. protein synthesis
D. the brain
Answer:
A. chemicals in the body
Explanation:
The expression of genes in an organism can be influenced by the environment, including the external world in which the organism is located or develops, as well as the organism's internal world, which includes such factors as its hormones and metabolism.
plz mark brainliest if helpful
Numerous biological processes that influence epigenetic systems, including as DNA methylation, histone codes, and miRNA expression, may be altered by environmental pollutants. Thus, option A is correct.
What role of chemicals in the body in gene expression?Gene expression, chromatin arrangement, and disease risk may all be impacted by these alterations.
A variety of factors, including genetic make-up, exposure to harmful chemicals, various environmental influences, and age, might have an effect on one's ability to express themselves.
The environment, including the external environment in which the organism is placed or develops, can have an impact on how genes are expressed in an organism.
Therefore, The organism's internal world, which includes such factors as its hormones and metabolism.
Learn more about gene expression here:
https://brainly.com/question/2508184
#SPJ2
Which type of molecule makes up the double layer of a cell membrane?
A)carbohydrate
B)lipid
C)nucleic acid
-D)protein
Answer:
B. Lipid
Lipids are molecules that include fats, waxes, and some vitamins, among others. Each phospholipid is made up of two fatty acids, a phosphate group, and a glycerol molecule. When many phospholipids line up, they form a double layer that is characteristic of all cell membranes.
Answer:
b. lipid
Explanation:
The phosphor lipid of cell membrane are arranged which are called lipit bilayer.
what is the structure and function of the mitochondria be sure to relate them
HELP ASAP PLEASE
Which of the following mechanical waves have the same energy?
Car battery
Compressed spring
Glowing incandescent lightbulb
Nucleus of uranium atom
Answer:
Car battery is the answer
Describe how the Sun is able to release the right amount of heat and energy for the right amount of time to support the existence of life on Earth. Record notes on star life cycles and what makes Earth habitable below:
Answer:
The sun produces a lot of heat but it also really works on how far away the earth is to.If the earth was any closer the earth would be MUCH HOTTER.
Explanation: