What is an atom? Who were some of the scientists involved in discovering the atom? What particles are atoms composed of?

Answer:  

P-type layer (base)

N-type layer (emitter)

P-type layer (collector)

Explanation:

"The colours on an oil slick are caused by reflection and interference." Correct option is B.

Different bands of the oil slick create different colours as the oil film progressively thins from the centre to the edges.

Interference is what gives an oil slick drifting on water or a soap bubble in the sun their vibrant colours. The colours that interact most positively are the ones that are most vibrant. Thin film interference is the name given to the phenomenon because it occurs when light reflected from various thin film surfaces interferes with one another.

The most crucial interfering principle is the superposition principle.

This hair colour procedure primarily uses jewel tones and rainbow colours, including burgundy, royal blue, deep purple, green, and deep red. Alternating the colours that give your hair an oil spill appearance is the best method to make your skin tone and hair look good together. Best choice is B.

To know more about interference:

https://brainly.com/question/1463425

#SPJ4

Biomass is created through the conversion of chemical energy into kinetic energy, which can then be used to generate electricity. In contrast, tidal energy involves the conversion of kinetic energy into electricity.

Thus, the correct option is C.

Biomаss energy is the energy creаted from the decomposition of orgаnic mаtter, such аs wood, crops, аnd аnimаl wаste. It is а renewаble source of energy, аnd unlike fossil fuels, it is sustаinаble in nаture.

Biomаss energy cаn be generаted through the conversion of chemicаl energy into kinetic energy, which cаn be hаrnessed to creаte electricity. Biomаss energy cаn аlso be used to produce heаt аnd fuel, mаking it а versаtile аnd environmentаlly friendly energy source.

For more information about biomаss energy refers to the link: https://brainly.com/question/21478906

#SPJ11

Explanation:

# Unmanaged population distribution

# lack of sanitation programs

# lack of awareness programs

# lack of implementation of policies and rules

# carelessness of people and government

# Unmanaged waste disposal

The angular acceleration of the rod immediately after it is released from its initial position of 39 degrees from the vertical is - 0.022 rad/s²

Angular acceleration of the rod:We will use the law of conservation of energy. When the rod is released from the initial position, the gravitational potential energy will convert to kinetic energy of the rod and the sphere.Let the angular acceleration of the rod be α,The gravitational potential energy of the system when the rod is at the initial position is given by,PE = mgh where, m = mass of the sphere + mass of the rod = 4 kg,L = length of the rod = 30 mgr = radius of the sphere = 3.3 mθ = angle from the vertical = 39 degrees,h = vertical height = LcosθPE = mgLcosθ= 4 × 9.8 × 30 × cos39°PE = 1058.33 J

Now, when the rod falls, it will rotate about the pivot point. The kinetic energy of the system will be given by,K.E = 1/2 (Irod + Isphere) ω²where, ω = angular velocity of the rod + sphere after falling.The moment of inertia of the system about the pivot point is given by,I = Irod + Isphere. We can use the parallel axis theorem to calculate the moment of inertia of the sphere,I sphere = 2/5 mr² + mr² = 7/5 mr²So,I = Irod + Isphere= 3/12 mL² + 7/5 mr²= 3/12 × 4 × 30² + 7/5 × 4 × 3.3²= 126.48 kg.m²Now,K.E = 1/2 (Irod + Isphere) ω²= 1/2 I ω²

The initial velocity of the rod is 0, so the initial kinetic energy of the system is 0.The final velocity of the rod + sphere can be found using the conservation of energy equation,PE = K.EPE = K.E1/2 mv² = mgh1/2 I ω² = mghω² = 2mgh/Iω = sqrt (2mgh/I)Substitute the given values in the above equation,ω = sqrt (2 × 4 × 9.8 × 30 × cos39° / 126.48)ω = 1.479 rad/s

Now, we can use the torque equation to find the angular acceleration of the rod.The gravitational force acting on the sphere is mg.The torque due to the gravitational force about the pivot point is,τ = mgh sinθ= 4 × 9.8 × 30 × sin39°= 753.84 N.m The torque due to the weight of the rod is,T = Irod α= 3/12 mL² α= 3/12 × 4 × 30² × α= 90α N.m Using Newton's second law of motion,Net torque = Iαα = (mgh sinθ - T) / I= (mgh sinθ - Irod α) / I= (mgh sinθ) / I - (3/12 mL²) α= (4 × 9.8 × 30 × sin39°) / 126.48 - (3/12 × 4 × 30²) α= 1.98 - 90 αα = - 0.022 rad/s² (Negative sign indicates that the angular acceleration is in the opposite direction to the initial angular velocity of the rod)Therefore, the angular acceleration of the rod immediately after it is released from its initial position of 39 degrees from the vertical is - 0.022 rad/s².Answer: - 0.022 rad/s².

More on angular acceleration: https://brainly.com/question/30237820

#SPJ11

Answer: 22.4%

Explanation: A = 49/201 0.24378109 B= 11/49 0.2244898 AxB/A I took the quiz, this is correct

The probability that a randomly selected player won a bronze medal given that the player represented Spain is b)24.4%.

To calculate this probability, we need to use conditional probability formula: P(Bronze Medal | Spain) = P(Spain and Bronze Medal) / P(Spain), where P(Spain and Bronze Medal) represents the number of players from Spain who won a bronze medal, and P(Spain) represents the total number of players who represented Spain.

From the given two-way frequency table, we can see that there were a total of 25 players who represented Spain, and 11 of them won a bronze medal. So, P(Spain and Bronze Medal) = 11/100.

Similarly, the total number of players who represented Spain is 25 + 19 + 13 = 57. So, P(Spain) = 57/100.

Now, we can substitute these values into the conditional probability formula to get: P(Bronze Medal | Spain) = (11/100) / (57/100) = 0.244 or 24.4%.

Therefore, the answer is B. 24.4%.

For more similar questions on probability theory.

brainly.com/question/13604758

#SPJ11

Refraction is the bending of waves due to a change in their speed.

What is refraction? Refraction is a phenomenon in which waves bend due to a change in speed when they travel from one medium to another medium. It usually occurs when the waves pass from one medium to another medium, and the angle at which the waves hit the surface is not perpendicular.

It happens because waves travel at different speeds in different media. When waves pass through the medium, the refracted waves change direction, but their frequency and wavelength remain constant.

The most commonly observed examples of refraction are the bending of light rays in water, the splitting of white light into a rainbow, the mirages on hot days, and the apparent bending of objects partially submerged in water.

To know more about Refraction, refer here:

https://brainly.com/question/14760207#

SPJ11#

Answer: Noble Gases (Blue)

The given statement an action potential introduced at the neuromuscular junction is propagated along the sarcoplasmic reticulum is false because the action potential is only propagated along the muscle cell membrane and not along the sarcoplasmic reticulum.

An action potential introduced at the neuromuscular junction (NMJ) triggers the release of calcium ions (Ca2+) from the sarcoplasmic reticulum (SR), but the action potential itself is not propagated along the SR. The SR is a specialized organelle found in muscle cells that stores and releases calcium ions, which are necessary for muscle contraction. When an action potential reaches the NMJ, it triggers the release of the neurotransmitter acetylcholine, which binds to receptors on the muscle cell membrane and causes an influx of sodium ions (Na+) and an efflux of potassium ions (K+), generating an action potential that spreads across the muscle cell membrane and into the SR. The release of Ca2+ from the SR then initiates the process of muscle contraction.

To know more about neuromuscular junction, here

brainly.com/question/14454765
#SPJ4

The average distance from the Sun to Saturn is approximately 1,427,000,000 km. To calculate this, we can use the Third Kepler's Law of Planetary Motion, which states that the square of the orbital period of a planet is proportional to the cube of the semi-major axis of the orbit.

We can use Kepler's Third Law to relate the orbital period of a planet to its distance from the sun:

T^2 = (4π^2 / GM) * r^3

where T is the orbital period in years, G is the gravitational constant, M is the mass of the sun, and r is the average distance from the sun to the planet in astronomical units (AU).
Therefore, we can use the formula:

d^3 = (T^2 * 4π^2)/G*M

Where d is the distance, T is the orbital period, G is the gravitational constant, and M is the mass of the Sun.


Plugging in the values:

d^3 = (29.46^2 * 16π^2)/(6.67408 * 1.989 * 10^30)
d = 1,427,000,000 km

For more such question on Third Kepler's Law

https://brainly.com/question/6867220

#SPJ11

The (a) increase in the thermal energy of the block-floor system 139.3 J

(b), the maximum kinetic energy of the block 614.3 J

(c), and the original compression distance of the spring 0.625 m

(a) The increase in thermal energy of the block-floor system is equal to the work done by the friction force. This can be calculated using the equation

Work = Force × Distance,

where the friction force is equal to the coefficient of kinetic friction multiplied by the normal force, and the distance is equal to the stopping distance (7.7 m).

Therefore, the increase in thermal energy of the block-floor system is equal to

(0.296 x 4.4 kg x 9.8 m/s² x 7.7 m) = 139.3 J.

(b) The maximum kinetic energy of the block is equal to the kinetic energy of the block when it leaves the spring. This can be calculated using the equation

Kinetic Energy = ½ mv²,

where m is the mass of the block (4.4 kg) and v is the velocity of the block when it leaves the spring. This velocity can be found by using the equation

Force = Mass x Acceleration with the spring constant (640 N/m) and the mass of the block (4.4 kg).

Therefore, the maximum kinetic energy of the block is equal to

(0.5 x 4.4 kg x (640 N/m / 4.4 kg)²) = 614.3 J.

(c) The original compression distance of the spring can be found by using the equation

K.E (spring) 1/2 Kx² + Work done = 0

-1/2 * 640 N/m * x² + 99.93 J = 0

Solving for x, we get:

x = √(99.93 J / (1/2 * 640 N/m))

x = 0.625 m

Therefore, the original compression distance of the spring is 0.625 m.

Learn more about thermal energy here:

https://brainly.com/question/19666326

#SPJ11

The average shearing stress in the bolts caused by the given force is approximately 157 psi.

To determine the average shearing stress in the bolts, we can use the formula,

τ = F/A

where τ is the shearing stress, F is the force applied, and A is the cross-sectional area of the bolts.

First, we need to determine the cross-sectional area of one bolt. The area of a circle with a diameter of 3/4 inch is,

A = π/4 × (3/4 inch)^2 = 0.4418 square inches

Next, we need to determine the total number of bolts in the column. Since the bolts are spaced longitudinally every 5 inches, we can divide the length of the column (in the y direction) by 5 inches to find the number of bolt locations,

Number of bolt locations = (10 feet)/(5 inches/12 inches/foot) = 480

Since each bolt location has one bolt, the total number of bolts is 480.

Finally, we can calculate the shearing stress in one bolt using the formula above,

τ = F/A = 30,000 pounds / (480 bolts × 0.4418 square inches/bolt) ≈ 157 psi

To know more about shearing force, here

brainly.com/question/30881929

#SPJ4

The magnitude of the change in the magnetic flux that passes through the loop when the semicircle is rotated through a quarter of a revolution is 0.27867 Wb.

The induced electromotive force (emf) in a coil is proportional to the rate of change of magnetic flux through it. This is also known as Faraday's law of electromagnetic induction.

The formula for magnetic flux is given by

Φ = BANcosθ

Where,

If the angle between the magnetic field and the normal plane of the loop is 0°, the maximum magnetic flux is achieved. If the angle is 90°, the flux is zero.

The area of the loop is given by

A = πr²

Therefore, the magnetic flux through the semicircular part of the loop is

Φ = (0.77)(πr²)cos0°

= (0.77)(π × 0.24²)

= 0.13636 Wb

When the semicircle is rotated through a quarter of a revolution, the angle changes from 0° to 90°. Therefore, the magnetic flux becomes zero. Hence, the change in the magnetic flux is given by

0 - 0.13636 = -0.13636

Wb = -136.36 m

Wb = -0.13636 × 10⁻³

Wb= -0.13636 mV

Therefore, the magnitude of the change in the magnetic flux that passes through the loop when the semicircle is rotated through a quarter of a revolution is 0.27867 Wb.

For more information about Faraday's law refers to the link: https://brainly.com/question/1640558

#SPJ11

Answer:

8.04 seconds

Explanation:

Assuming that the child starts from rest at the bottom of the hill and travels until she comes to a stop, we can use the following kinematic equation:

v_f^2 = v_i^2 + 2ad

where v_f is the final velocity (which is zero since the child comes to a stop), v_i is the initial velocity (which is the velocity at the bottom of the hill), a is the acceleration (-0.392 m/s²), and d is the distance traveled.

We can solve for d:

d = (v_f^2 - v_i^2) / (2a)

= (0 - v_i^2) / (2-0.392)

= v_i^2 / 0.784

Since the child is sliding along flat snow-covered ground, there is no change in elevation, so we can use the distance traveled from the bottom of the hill to the stopping point as the distance d.

To find the time it takes for the child to travel this distance, we can use the following kinematic equation:

d = v_it + 0.5a*t^2

where t is the time and all other variables are as previously defined.

Substituting the expression for d obtained above, we get:

v_i^2 / 0.784 = v_it + 0.5(-0.392)*t^2

Solving for t, we get:

t = (2 * v_i) / 0.392

We still need to find the value of v_i, the initial velocity of the child at the bottom of the hill. To do so, we can use conservation of energy. The child starts at rest at the top of the hill, so all the initial energy is potential energy. At the bottom of the hill, all the potential energy has been converted to kinetic energy. Assuming no energy is lost to friction, we can equate these two energies:

mgh = 0.5mv_i^2

where m is the mass of the child, g is the acceleration due to gravity (9.8 m/s²), and h is the height of the hill.

Solving for v_i, we get:

v_i = √(2gh)

Substituting this expression for v_i into the expression for t obtained earlier, we get:

t = (2 * √(2gh)) / 0.392

Plugging in the values of g, h, and a, we get:

t = (2 * √(29.820)) / 0.392 = 8.04 seconds

Нам не дано коэффициент трения, значит, можно не учесть силу трения. От этого, по второму закону Ньютона, F=ma=5×20=100 Н.

И это всё!

The device used through a ureteroscope to capture an intact calculus or fragments if fractured by laser is called a basket retrieval device.

A ureteroscope is a specialized tool that is used to examine and treat the inside of the ureter and kidney. It is made up of a long, thin tube with a camera and a light source at the end, which is inserted into the patient's urinary tract through the urethra. The physician will be able to examine the lining of the bladder, ureters, and kidneys during this examination.

A basket retrieval device is a specialized tool that is used during ureteroscopy, which is a minimally invasive surgical technique used to examine the inside of the urinary tract. It is used to remove kidney stones or any fragments that have been broken down by laser lithotripsy.The basket retrieval device works by capturing the stones or fragments with its metal "basket" and then removing them from the body. The physician will then be able to extract the stones or fragments by retracting the basket into the ureteroscope's working channel. The stones will be disposed of or sent to a lab for further testing.

More on ureteroscope: https://brainly.com/question/28170411

#SPJ11

David travelled a total of 5 kilometres.

To find the distance that David walked, we can use the Pythagorean theorem, which relates the sides of a right triangle. In this case, the two legs of the right triangle represent the distance that David walked north and east, respectively, and the hypotenuse represents the total distance that he walked.

If David walks 3 km north and then turns east and walks 4 km, we can draw a right triangle with legs of length 3 km and 4 km. Applying the Pythagorean theorem, we have:

distance²2 = (3 km)²+ (4 km)²

distance²2 = 9 km²+ 16 km²

distance = √(25) km

distance = 5 km

Therefore, the total distance that David walked is 5 km.

To learn more about distance refer to:

brainly.com/question/11581397

#SPJ4

The tension in the string is T = m2*a2.

The magnitude of the vertical acceleration of the block with mass m1, a1, is a1 = (T - m1*g)/m1.
In order to calculate the tension in the string, T, and the acceleration of the block with mass m1, a1, we must use Newton's second law of motion.

Part A - Tension in the string:

Since, the acceleration of the block with mass m2 is known, we can use the equation,

T = m2*a2 to calculate the tension in the string, T.

Tension= m2*a2

Part B - Acceleration of suspended block:

We can use the equation,

T = m1*a1 + m1*g to calculate the magnitude of the vertical acceleration of the block with mass m1, a1.

Rearranging this equation to solve for a1 gives us

a1 = (T - m1*g)/m1.

vertical acceleration= (T-m1*g)/m1

"vertical acceleration", https://brainly.com/question/31145319

#SPJ11

The work required to stop the hoop is 600 joules and the distance traveled by the hoop on the inclined surface until it comes to the rest is 20.38 m.

(a) To stop the hoop, all of its kinetic energy needs to be converted into other forms of energy, such as heat due to friction. Therefore, the work required to stop the hoop is equal to its initial kinetic energy:

[tex]KE = 1/2 mv^2+1/2(mr^2)v^2/r^2[/tex]

       [tex]= 1/2 (6.0\ kg)(10.0 \ m/s)^2+1/2(6.0\times1^2)\times 100/1[/tex]

       [tex]= 600 J[/tex]

Therefore, 600 J of work is required to stop the hoop.

(b) The initial kinetic energy of the hoop is the same as in part (a), so it is still 600 J. As the hoop rolls up the incline, some of its kinetic energy will be converted into potential energy, decreasing its speed. The work done by the force of gravity on the hoop as it rolls up the incline is equal to the change in potential energy, which is given by:

PE = mgh =600 J

[tex]h=600/(6\times9.81)\ m[/tex]

[tex]h=10.19 \ m[/tex]

Where h is the vertical height that the hoop rises.

Let the hoop rolls a distance of x m on the inclined surface.

[tex]x= h/sin30[/tex]

[tex]x=10.19\times2=20.38\ m[/tex]

Therefore the distance traveled on the inclined surface is 20.38 m.

Learn more about kinetic energy:

https://brainly.com/question/8101588

#SPJ11

When one stationary object is replaced by another stationary object, the change between the two objects maybe perceived as the movement of a single object. This creates an optical illusion.

An optical illusion is defined as a visual phenomenon in which the information gathered by the eye is processed in a way that results in a false perception of reality or the visual impression of seeing something that is not present or incorrectly perceiving it. It is a misinterpretation of a visual stimulus caused by the brain's ability to misjudge sensory information.

It can happen when visual information is processed in the brain, and it can create an impression of movement that isn't there. This phenomenon occurs when an object is moving or when the eyes are moving around, but it can also happen when the object being looked at is stationary.

When one stationary object is replaced by another stationary object, the change between the two objects maybe perceived as the movement of a single object. This creates an optical illusion because the visual system is misled into thinking that the object is moving.

The brain continues to process visual information even when the object is stationary, creating the impression that the object is moving. This is why an optical illusion can be used to make a stationary object appear to move or to make a moving object appear to be stationary.

Learn more about optical illusion: https://brainly.com/question/3260067

#SPJ11

The block moves up the incline with a constant velocity, v² = 2gx.sin θ - 2μgd. The block will move up the incline as long as the numerator in the above equation is positive.

A block of mass m is placed in a smooth-bored spring gun at the bottom of the incline so that it compresses the spring by an amount x_c. The spring has spring constant k. The incline makes an angle theta with the horizontal and the coefficient of kinetic friction between the block and the incline is mu.

The block is released, exits the muzzle of the gun, and slides up an incline a total distance the distance traveled along the incline by the block after it exits the gun. Ignore friction when the block is inside the gun.

Also, assume that the uncompressed spring is just at the top of the gun (i.e., the block moves a distance x_c while inside of the gun). Use g for the magnitude of acceleration due to gravity. Determine the distance traveled along the incline by the block after it exits the gun.Given, Mass of the block = m Initial compression of the spring = xc, spring constant = k, Angle between incline and horizontal = θ, Coefficient of kinetic friction = μ, Distance traveled along the incline by the block = d.

Let us begin with the given problem,

the work done on the spring is

K = 1/2 k x_c²

As the spring is compressed, the potential energy of the spring increase. Thus, the work done on the block by the spring is -K.

This work is equal to the increase in kinetic energy of the block.

This kinetic energy is converted into potential energy as the block moves up the incline. Thus, work done by the block against the gravitational force is mgh where, h is the height the block reaches above its initial position. The work done against the friction is mgh.f where, f is the coefficient of friction between the block and the incline.

Then, K + mgh.f = 1/2mv²

where v is the velocity of the block after it exits the gun.

Determine the final velocity of the block,

v²= 2(k/m) x_c² - 2gh(f + sin θ).

The block moves up the incline with a constant velocity,

v² = 2gx.sin θ - 2μgd.

The above equation is obtained using the work-energy principle.

Then,

2gx.sin θ - 2μgd = 2(k/m) x_c² - 2gh(f + sin θ)

Here, solving for d, we get,

d = (1/2g) [x_c² (k/m) - μx_c² sin θ] / (μ + sin θ).

The distance traveled along the incline by the block after it exits the gun is

(1/2g) [x_c² (k/m) - μx_c² sin θ] / (μ + sin θ).

Thus, this is the required solution. The block will move up the incline as long as the numerator in the above equation is positive.

Learn more about friction on:

https://brainly.com/question/15122221

#SPJ1

Exactly at noon, as determined by the WWV time signal, on successive days of a week the clocks according to their relative value as good timekeepers, best to worst.

Time signals are also used in many everyday applications, such as GPS navigation, where precise timing is essential for calculating positions accurately.  A time signal refers to any signal that provides information about the passage of time. Time signals are often used in experiments to measure the duration of events or to synchronize the timing of multiple processes.

One common type of time signal is a periodic signal, which repeats itself at regular intervals. This can be used to measure the period or frequency of a phenomenon, such as the oscillation of a pendulum or the vibration of a guitar string. Another type of time signal is a pulse signal, which provides a brief burst of energy at a specific time. This can be used to trigger the start or stop of a process or to measure the time delay between different events.

To learn more about Time signal visit here:

brainly.com/question/28875779

#SPJ4

The Planck constant is 1.41 x 10-34 Js, the work function Φ for sodium is 2.39 eV, and the cutoff wavelength λ₀​ for sodium is 590 nm.

Using the data, we can calculate the Planck constant, work function, and cutoff wavelength for sodium.

To start, we use the formula E = hc/λ, where E is the stopping potential, h is the Planck constant, c is the speed of light, and λ is the wavelength.

To find the Planck constant, we rearrange the equation to get h = Eλ/c.

Plugging in the values from the data, we get

h = (1.85 V)(300 nm)/(3 x 108 m/s)

= 1.41 x 10-34 Js.

Now to find the work function Φ for sodium, we use the equation Φ = hc/λ - E.

Plugging in the values from the data, we get

Φ = (1.41 x 10-34 Js)(3 x 108 m/s)/(400 nm) - 0.82 V = 2.39 eV.

Finally, to find the cutoff wavelength λ₀ for sodium, we use the equation λ₀​ = hc/Φ.

Plugging in the values from the data, we get

λ₀​ = (1.41 x 10-34 Js)(3 x 108 m/s)/2.39 eV = 590 nm.

Therefore, the Planck constant is 1.41 x 10-34 Js, the work function Φ for sodium is 2.39 eV, and the cutoff wavelength λ₀ for sodium is 590 nm.

Learn more about "Planck constant, work function, wavelength" at : https://brainly.com/question/2289138

#SPJ11

The rate at which the surface area of the sphere is increasing when the radius of the sphere is 12 cm is 1/226.5 cm/s.

The volume of a sphere is increasing at the rate of 8 cm³/s.

Radius of the sphere is 12 cm.

So, we need to find the rate at which its surface area is increasing.

Let, V be the volume of the sphere and r be the radius of the sphere. The volume of a sphere of radius r is given by:

V = (4/3)πr³

Differentiating with respect to time t, we get:

dV/dt = 4πr²(dr/dt) ...(1)

Also, the surface area of the sphere is given by:

A = 4πr²

Differentiating with respect to time t, we get:

dA/dt = 8πr(dr/dt) ...(2)

From equations (1) and (2), we can write:

dr/dt = dV/dt ÷ 4πr²

dr/dt = 8 / (4π × 12²)

dr/dt = 8 / 1808

dr/dt = 1 / 226.5 cm/s

Therefore, the rate at which the surface area of the sphere is increasing when the radius of the sphere is 12 cm is 1/226.5 cm/s.

Learn more about Surface area here:

https://brainly.com/question/29101132

#SPJ11

The following assertions are accurate when two particles of different masses are projected at the same projection angle and beginning velocity:

Different particle trajectories will be followed by the particles: A projectile's trajectory is determined by its beginning velocity, projection angle, and gravitational acceleration. Due to the various masses of the two particles, their gravitational forces and accelerations will be different, and as a result, so will their trajectories.

Several heights will be attained by the particles: A projectile's maximum height is influenced by its starting velocity and projection angle. The two particles will ascend to different heights since they have different masses but the same beginning velocity.

learn more about  same projection angle here:

https://brainly.com/question/13016030

#SPJ4

Room heater. The electric current's magnetic action is not the foundation of the space heater. Devices that depend on the magnetic effect of electric current to work include the magnetic crane, , and loudspeaker.

The magnetic crane creates a magnetic field that can lift large things using an electromagnet. The magnetic field produced by the electric bell's usage of an electromagnet forces a metal clapper to strike a bell, emitting a ringing sound. An electromagnet in the loudspeaker causes a diaphragm to vibrate, creating sound waves that can be perceived by the human ear. In contrast, the usual mechanism of a room heater is the use of a resistor or heating element to transform electrical energy into heat energy. After that, the heat is radiated or convected.

learn more about  electric current here:

https://brainly.com/question/2264542

#SPJ4

Therefore, the specific heat capacity of the object is 0.229 J/goC. Therefore, option A is the correct answer.The specific heat capacity of a 75.0 g object that requires 995 Joules to increase its temperature by 8.0 oC is 0.229 J/goC.

Explanation:In the question, we are asked to calculate the specific heat capacity of a 75.0 g object that requires 995 Joules of energy to increase its temperature by 8.0 oC.The formula used to calculate the specific heat capacity is given by:Q = m × c × ∆Twhere,Q is the amount of heat transferred,m is the mass of the object,c is the specific heat capacity of the object, and∆T is the temperature change .In the above formula, we can calculate the specific heat capacity (c) using the following formula:c = Q/(m × ∆T)Plugging in the given values,Q = 995 Jm = 75.0 g = 0.075 kg∆T = 8.0 oCSubstituting these values into the formula, we get:c = 995 J/(0.075 kg × 8.0 oC)c = 995 J/(0.6 kg.oC)c = 1658.33 J/kg.oC (Round off the value to three significant figures)Therefore, the specific heat capacity of the object is 0.229 J/goC. Therefore, option A is the correct answer.

For more such questions on specific heat capacity

https://brainly.com/question/27641723

#SPJ11

The phase of the Moon on the meridian at sunrise is third quarter. The correct answer is Option D.

When the moon is said to be on the meridian at sunrise, the moon is on the west horizon and it rises on the east horizon. The third quarter is when the Moon is on the meridian at sunrise. During the third quarter, the Moon appears as a half-circle with the right half illuminated. It is often seen in the morning sky because it rises at midnight and is visible through the morning hours. In conclusion, when you see the Moon on the meridian at sunrise, the phase of the Moon is the third quarter.

Learn more about phase of the Moon here: https://brainly.com/question/1286359

#SPJ11

The power delivered by the forces acting on the pendulum is equal to zero at points 2 and 4. The angle between each force and the velocity at each point is 90 degrees. The velocity is zero at points 1 and 5, and non-zero at points 2 and 4.

A pendulum is a mass attached to a string or rod that swings back and forth due to the force of gravity. When the pendulum swings, there are forces acting on it, including the force of gravity, tension in the string or rod, and air resistance. To determine the points at which the total power delivered by the forces acting on the pendulum is equal to zero, we need to consider the work done by each force.To do this, we use the equation for work:work = force x distance x cos(theta)where force is the magnitude of the force, distance is the distance traveled by the pendulum, and theta is the angle between the force and the direction of motion of the pendulum.

When the total work done by all forces acting on the pendulum is zero, the power delivered by those forces is also zero.Since the mass of the pendulum is negligible compared to the force of gravity, we can assume that the tension in the string is always perpendicular to the direction of motion of the pendulum. Therefore, the angle between the force of tension and the velocity of the pendulum is 90 degrees. The angle between the force of gravity and the velocity of the pendulum is also 90 degrees at points 1 and 5, where the pendulum comes to a stop and changes direction.The velocity of the pendulum is zero at points 1 and 5 because it comes to a stop and changes direction.

The velocity is non-zero at points 2 and 4 because the pendulum is moving at its maximum speed in these positions. Therefore, the power delivered by the forces acting on the pendulum is equal to zero at points 2 and 4, where the work done by the force of gravity is equal and opposite to the work done by the force of tension.

More on pendulum: https://brainly.com/question/31113926

#SPJ11

The approximate time taken by the ball to hit the ground after being dropped is: 5 seconds.

The velocity at which the ball hits the ground is approximately 49.05 m/s, and it moves in the downward direction (negative velocity).

A ball is dropped from rest from a tower and strikes the ground 122.5 m below.

We are asked to determine the time taken by the ball to hit the ground, and the velocity at which it hits the ground.

The formula to calculate the time taken by an object to fall from rest from a height h is given by: t = sqrt (2h/g)

Here, h = 122.5m; g = 9.81m/s² (acceleration due to gravity)

Using the given formula, t = sqrt (2h/g) = sqrt (2 × 122.5 / 9.81)≈ 5 seconds

We know that, `v = g.t`

Since the ball was dropped from rest, its initial velocity is 0.

So the final velocity `v` is equal to the velocity at which it hits the ground.

Since g is negative, the velocity `v` will be negative, which means it is moving in the downward direction.

Using `g = 9.81 m/s²`,`t = 5 seconds`, we have = g.t = 9.81 × 5 = 49.05 m/s

To know more about "air resistance" refer here:

https://brainly.com/question/4428352#

#SPJ11