What is a unit for distance?

The Thomson model of the atom proposed that the atom was a sphere of positive charge with negative electrons embedded in it. This model was later disproved by the Rutherford model, which proposed that the atom was composed of a small, dense, positively charged nucleus surrounded by a cloud of negatively charged electrons. The Rutherford model also suggested that the electrons were in orbit around the nucleus, rather than being embedded in it.

The anode and the cathode reaction is given as : Anode:

2Cl- (aq) → Cl2 (g) + 2e- (oxidation)

Cathode:

Mg2+ (aq) + 2e- → Mg (s) (reduction)

The reaction at the anode and cathode during the electrolysis of magnesium chloride (MgCl2) can be written as follows:

Anode:

2Cl- (aq) → Cl2 (g) + 2e- (oxidation)

Cathode:

Mg2+ (aq) + 2e- → Mg (s) (reduction)

These reactions occur as a result of the movement of ions in the solution towards the electrodes, where they gain or lose electrons, producing the desired products.

Read more on chemical reaction here:https://brainly.com/question/11231920

#SPJ1

The best scenario when using formal charge to predict molecular structure is the arrangement with the smallest nonzero formal charges.

Formal charge is the difference between the number of valence electrons an atom has in its elemental form and the number of electrons assigned to it in a Lewis structure. The goal in molecular structure prediction is to distribute the electrons in a way that minimizes the formal charges on the atoms. The smallest formal charges indicate a more electrically neutral arrangement, which is generally considered the most stable and accurate representation of the molecule's electron distribution. So, option (b) the arrangement with the smallest nonzero formal charges" is the best scenario.

To know more about  Lewis structure, visit the link given below:

https://brainly.com/question/20300458

#SPJ4

A scientist goes to lab to synthesize Na₃AlF₆ via the balanced chemical reaction. If they need 780. grams of Na₃AlF₆, and the overall percent yield is 45.4 %,311.79 g of Al₂O₃ is required to form 780 grams of Na₃AlF₆.

The balanced chemical reaction is defined as the mass of total number of product is exactly equal to the total number of mass of reactant.

Given:

45.4% yield = 780 g

Then 100% yield would be =780 × (100/45.4)

= 1718 g

Molar mass of Na₃AlF₆ = 209.94 g/mol

Molar mass of Al₂O₃ = 101.96 g/mol

1mole of Al₂O₃ gives 2 moles of Na₃AlF₆ .

⇾ 101.96 g of Al2O3 gives 2 × 209.94 g of Na3AlF6

Therefore, x g of Al2O3 gives 1284 g of Na3AlF6

x = (1718 × 101.96)/ 2 × 209.94

= 311.79 g

Thus, 311.79 g of Al₂O₃ is required to form 780 grams of Na₃AlF₆.

To learn more about the balanced chemical reaction, follow the link;

https://brainly.com/question/29997907

#SPJ1

Urea is the primary nitrogenous byproduct of protein breakdown in all mammals as well as certain fishes. Therefore, 1.81×10²¹atoms are present.

Urea, commonly known as carbamide, is a carbonic acid diamide. It has the formula H2NCONH2. Urea is used as a fertilizer as well as feed additive, as well as a beginning ingredient in the production of polymers and pharmaceuticals. It is a colorless, crystalline chemical that dissolves at 132.7 degrees Celsius (271 degrees Fahrenheit) and decomposes after boiling.

Urea is the primary nitrogenous byproduct of protein breakdown in all mammals as well as certain fishes. The substance is found not just in all animals' urine, but also mammalian blood, bile, milk, as well as sweat.

mole =given mass /molar mass

     =2×453.6g/60.06

    =907.2/60.06

    = 15.10

atoms of nitrogen = 2×15.10 × 6.022×10²³=1.81×10²¹atoms

Therefore, 1.81×10²¹atoms are present.

To learn more about urea, here:

https://brainly.com/question/14811017

#SPJ1

When a salt is dissolved in water, it is represented by c) aq.

A reaction occurs when there is a change in the state of the reactant leading to the formation of the new product.

When a compound gets dissolved, the solution becomes an aqueous solution of that compound.

In the case of a salt, when it gets dissolved into water, the ionic bonds existing between the atoms break to form ions. The solid salt then changes into aqueous solution of the salt.

What is aq symbol in chemistry?

In a chemical equation, the subscript (aq) after a molecule means that it is aqueous. An aqueous solution is a solution in which the solvent is water.

What is an aqueous solution?

An aqueous solution is one in which the solvent is liquid water. That is, solute (dissolved) ions and molecules are surrounded by water molecules and incorporated into the network of bonds within the water. The dissolved species then spread throughout the water.

To know more about an aqueous solution:

https://brainly.com/question/19587902

#SPJ4

The free energy diagrams can be used to compare and analyze the thermodynamic properties of different chemical reactions.

The y-axis of the diagrams represent the free energy of the reaction, and the x-axis represents the progress of the reaction from the reactants to the products. By comparing the free energy diagrams of different reactions, it is possible to determine which reactions are more thermodynamically favorable, and thus more likely to occur spontaneously.

Additionally, the diagrams can also provide insight into the activation energy of a reaction, which is the amount of energy needed to initiate the reaction.

Learn more about free energy diagrams:

https://brainly.com/question/6589816

#SPJ4

Covalent bonds between purines and pyrimidine bases  is NOT a type of molecular interaction that determines the tertiary structure of a protein. The correct answer is A.

A polypeptide's overall three-dimensional structure is referred to as its tertiary structure. The interactions between the R groups of the amino acids that make up the protein are principally responsible for the tertiary structure.

The entire spectrum of non-covalent bonds, including hydrogen bonds, ionic bonds, dipole-dipole interactions, and London dispersion forces, all contribute to tertiary structure.

For instance, R groups with opposite charges can form an ionic bond, while those with like charges repel one another. Similar to other dipole-dipole interactions, polar R groups can create hydrogen bonds

Hydrophobic interactions are crucial to tertiary structure because they allow hydrophilic amino acids to connect with nearby water molecules on the outside of the protein while forming clusters of nonpolar, hydrophobic R groups on the inside of the protein.

The disulfide link is a unique sort of covalent bond that can contribute to tertiary structure. Disulfide bonds, covalent connections between the side chains of cysteines that contain sulfur, are substantially more powerful than the other kinds of bonds that make up tertiary structure.

They serve as molecular "safety pins," firmly connecting various polypeptide components to one another.

Learn more about molecular interaction at https://brainly.com/question/21220768

#SPJ4

Identifying the two compounds present in an unknown mixed sample can be a challenging task, but a combination of these techniques can help to narrow down the possibilities and eventually identify the compounds.

Here are some possible approaches:

Analyze the physical and chemical properties of the unknown sample, such as melting point, boiling point, solubility, reactivity with certain chemicals, and spectroscopic data (e.g., IR, NMR, UV-Vis). Compare these properties to those of known compounds and see which ones match.

Use various separation techniques to isolate each individual component of the mixture, such as extraction, distillation, chromatography, and crystallization. Then, analyze each isolated component using various analytical techniques to determine its identity.

Use chemical tests and reactions to identify the functional groups or chemical characteristics of the unknown sample. For example, if the sample contains a carbonyl group, it can be tested with 2,4-dinitrophenylhydrazine to form a characteristic orange precipitate.

Overall, identifying the two compounds present in an unknown mixed sample can be a challenging task, but a combination of these techniques can help to narrow down the possibilities and eventually identify the compounds.

Learn more about dinitrophenylhydrazine here:

https://brainly.com/question/14985873

#SPJ4

Answer:

Explanation:

0.87

Answer:

Explanation:

In an oxidation-reduction (redox) reaction, electrons are transferred from one substance to another. There are two key components that are essential in a redox reaction:

An oxidizing agent (or oxidant): This is the substance that accepts electrons and becomes reduced during the reaction. The oxidizing agent is responsible for causing oxidation in the other substance involved in the reaction.

A reducing agent (or reductant): This is the substance that donates electrons and becomes oxidized during the reaction. The reducing agent is responsible for causing reduction in the other substance involved in the reaction.

In a redox reaction, the reducing agent is oxidized and loses electrons, while the oxidizing agent is reduced and gains electrons. The transfer of electrons from one substance to another is what drives the reaction and leads to the formation of new products.

For example, consider the reaction between magnesium metal (Mg) and oxygen gas (O2) to form magnesium oxide (MgO):

2Mg + O2 → 2MgO

In this reaction, magnesium metal is oxidized (loses electrons) and oxygen gas is reduced (gains electrons). Magnesium is the reducing agent, while oxygen is the oxidizing agent.

The number of grams of carbon in 25g of carbondioxide is 6.82g.

The mass of an element in a compound can be calculated by dividing the atomic mass of the element by the molar mass of the compound multiplied by the mass of the compound.

According to this question, there are 25g of carbondioxide. The mass of carbon in this compound can be calculated as follows:

Mass of carbon = 12/44 × 25

Mass of C = 6.82g

Learn more about mass at: https://brainly.com/question/16386473

#SPJ1

The reaction A+B⇒3C always goes to completion. If you have 10 A, the number of B which would be needed to make the most C is 10 and is therefore denoted as option C.

This is referred to as a process in which one or more substances, the reactants, are converted to one or more different substances, the products.

If you have 10 A, the number of B which would be needed to make the most C is 10 because of the equal amount number of mole of the substances or elements involved in the reaction.

Read more about Chemical reaction here https://brainly.com/question/11231920

#SPJ1

Aluminum (Al) is not considered an essential nutrient for photosynthesis or phytoplankton growth.

While aluminum is abundant in the Earth's crust, its availability is dependent on soil pH, and it is not required for photosynthesis or phytoplankton growth. The essential nutrients for photosynthesis and phytoplankton growth are:

Photosynthesis and phytoplankton growth are essential processes in the global carbon cycle. Photosynthesis uses light energy to convert carbon dioxide and water into energy-rich organic compounds, while phytoplankton growth utilizes organic compounds to produce organic matter. Both processes are essential for maintaining the balance of carbon dioxide in the atmosphere and oceans.

Learn more about photosynthesis or phytoplankton:

https://brainly.com/question/844604

#SPJ4

Rutherford discovered the nucleus . Option B

Ernest Rutherford is famous for his discovery of the structure of the atom and his pioneering work in nuclear physics. He made several key discoveries that transformed our understanding of atomic structure and the behavior of atomic nuclei.

Rutherford performed his famous gold foil experiment in which he used alpha particles to probe the structure of the atom. He found that most alpha particles passed straight through the gold foil, but a small number were deflected. This showed that the atom had a small, dense nucleus at its center.

Learn more about neutrons:https://brainly.com/question/28992636

#SPJ1

Rutherford's experiment was important because it showed that atomic nucleus and is therefore dented as option A.

This is referred to as a procedure carried out to support or refute a hypothesis, or determine the efficacy or likelihood of something previously untried.

Rutherford was a scientist who was famous for his gold-foil experiment, in which he demonstrated that the atom has a tiny, massive nucleus by  bombarding aluminum foil with beam of light known as alpha particles which is therefore the reason why option A was chosen as the correct choice.

Read more about Rutherford here https://brainly.com/question/14996029

#SPJ1

151.3 grams of carbon are required to produce 12.6 moles of methane.

The balanced chemical equation for the reaction is:

C + 2H₂ → CH₄

According to the stoichiometry of the equation, 1 mole of carbon reacts with 2 moles of hydrogen gas to produce 1 mole of methane gas. Therefore, the number of moles of carbon required to produce 12.6 moles of methane is:

12.6 moles CH₄ × 1 mole C / 1 mole CH₄ = 12.6 moles C

To convert moles to grams, we need to use the molar mass of carbon, which is 12.01 g/mol.

Therefore, the mass of carbon required to produce 12.6 moles of methane is:

12.6 moles C × 12.01 g/mol = 151.3 g

Learn more about reaction here: https://brainly.com/question/29470602

#SPJ1

The concentration of 5 mg/ml refers to the mass of the solute dissolved in a given volume of solvent (ethyl acetate) to create a solution

The 5 mg should be added to the volume of solvent, so the final volume of the solution will be greater than 1 ml.

The concentration of 5 mg/ml refers to the mass of the solute (in this case, the material in the supernatant) dissolved in a given volume of solvent (ethyl acetate) to create a solution. It is a measure of how much of the solute is present in a unit volume of the solution.

If you want to achieve a final concentration of 5 mg/ml for the pellet, you would need to dissolve 5 mg of the pellet in enough ethyl acetate to make a total volume of 1 ml. The 5 mg should be added to the volume of solvent, so the final volume of the solution will be greater than 1 ml.

It's worth noting that the concentration of the pellet may be different from the concentration of the supernatant, depending on the experimental procedure used to generate the supernatant. It's also possible that the 5 mg/ml concentration is not relevant to the pellet and is only given as a reference point for the supernatant.

Learn more about supernatants here https://brainly.com/question/10702032

#SPJ1

Answer:

In a first-order reaction at 300 K, the half-life is 2.50 x 10^4 seconds and the activation energy is 103.3 kJ/mol.

What is the rate constant at 350 K?

Explanation:

The statement that Hydrogen was discovered more than 500 years ago due to the reaction of an acid and metals ... repeated Paracelsus 's experiment, the gas was flammable, is true.

When Paracelsus combined acids with metals, hydrogen gas was produced as a byproduct, which he observed unintentionally. A Swiss-born physician named Theodore de Mayerene who subscribed to Paracelsian thought replicated Paracelsus' research on the interaction of metals and acids.

De Mayerne found that the byproduct gas was combustible, which was an important finding in the future knowledge of chemical reactions even if he was unaware that the gas created was hydrogen or even a new element.

Find out more on Paracelsus at https://brainly.com/question/10644901

#SPJ1

The correct question is:

Hydrogen was discovered more than 500 years ago due to the reaction of an acid and metals and when Theodore de Mayerene repeated Paracelsus 's experiment, the gas was flammable.

True

False

0.0269 Litre is the volume of 1.0M copper(II) sulfate solution required to completely react with 1.0g of Fe(s) according to this equation: 2Fe(s)+3Cu2+(aq)→2Fe3+(aq)+3Cu(s).

The term molarity is defined as the number of moles of solute present in per litre of solution.

Given:

Moles of Fe = mass of Fe / molar mass of Fe

Mole Fe = 1.0 g / 55.845 g/mol

= 0.0179 mol

According to the balanced chemical equation,

3 mol Cu2+ are required to react with 2 mol Fe.

So, the number of moles of Cu2+ required to react with 0.0179 moles of Fe is mol Cu2+ = (3/2) x mol Fe

= (3/2) x 0.0179 mol

= 0.0269 mol

By using the molarity,

mole = concentration x volume

volume = moles / concentration

Volume = 0.0269 mol / 1.0 mol/L

Volume = 0.0269L

Thus, the volume of 1.0 M Cu⁺² solution required to fully react with 1.0 g of Fe is 0.0269 L.

To learn more about the molarity, follow the link;

https://brainly.com/question/8732513

#SPJ1

The term mole concept is used here to determine the mass of hydrogen. The mass of MnO₂ which is 4300g and that of hydrogen is 2.21 g. Thus the correct option is B for question 1 and same B for question 2 .

One mole of a substance is defined as that quantity of it which contains as many entities as there are atoms exactly in 12 g of carbon - 12. The formula used to calculate the number of moles is:

Number of moles = Given mass / Molar mass

The molar mass of water is 18.01528 g/mol and the given mass is 445 g.

Then the number of moles is:

445 g/ 18.01528 g/mol = 24.7 mol

In the equation 1 mole of 'H₂O' = 2 mole of 'MnO₂' and the molar mass of MnO₂ is 86.93 g/mol.

Then the mass of MnO₂ produced is:

445 ×1/18.01528 ×2 mol MnO₂/ 1 mol H₂O × 86.93 g/mol / 1 mol H₂O

= 4294.3 g

In scientific notation it is written as 4.3 × 10³ g = 4,300 g.

Thus the correct option is B.

In question 2:

The molar mass of oxygen is 16.00 g/mol and the given mass is 8.75.

Then the number of moles is:

8.75 g / 16.00 g/ mol = 0.546 mol

In the equation 1 mole of 'O' = 4 mole of 'H' and the molar mass of H₂ is 1.00794 g/mol.

Then the mass of H₂ produced is:

8.75 × 1 / 16.00 × 4/1 × 1.00794 / 1 = 2.2048 = 2.21 g.

Thus the correct option is B.

To know more about mole concept, visit;

https://brainly.com/question/19800462

#SPJ1    

The following molecule that can form hydrogen bonds is acetic acid (A)

Because it is a polar molecule, acetic acid is capable of forming hydrogen bonds with the water molecules in the environment. The hydrogen bonding (H-bonding) that exists between the molecules of acetic acid and water is the most powerful force that is responsible for determining the chemical and physical characteristics of the mixture. In its structure, acetic acid exhibits both a double oxygen-carbon bond as well as a hydrogen atom that is connected to an oxygen atom.

The oxygen atom that is part of the double bond in the acetic acid molecule has the potential to form a hydrogen bond with one of the hydrogen atoms in the water molecule. Two equivalent hydrogen bonds are known to cause acetic acid to form a cyclic dimer. Because of how stable the dimer is, it can even stay in the gas phase.

To learn more about hydrogen bonds, click here:

https://brainly.com/question/28478038

#SPJ4

The actual average mass of 1 lithium atom is 6.941 grams/atom this is equal to one mole of lithium.

The fundamental physical property of matter is mass. The atomic mass refers to the mass of an atom or molecule. To calculate the average mass of elements and molecules and to solve stoichiometry problems, the atomic mass is used.

Lithium, for example, has an atomic mass of 6.941 grams, which is equivalent to one mole of lithium. This is why we express atomic and molecular masses in grams per mole, or g/mol.

Thus, The actual average mass of 1 lithium atom is 6.941 grams/atom.

To learn more about the atomic mass, follow the link;

https://brainly.com/question/17067547

#SPJ1

The heat required is 2347 J

The heat required for a change of state depends on the substance, the amount of the substance, and the specific change of state involved.

When a substance undergoes a change of state, such as melting or boiling, heat is added or removed to cause the particles in the substance to gain or lose energy and rearrange themselves into a new physical state. The amount of heat required to effect this change is known as the heat of transformation, or the heat of fusion

We know that;

H1 = 25.0 *  0.235 * (962 - 950)

= 70.5 J

H2 = 25 g * 88 J/g

= 2200 J

H3 = 25 * 0.278  * (972 - 962)

=76. 5 J

Then we have that;

70.5 J + 2200 J + 76. 5 J

=2347 J

Learn more about heat:https://brainly.com/question/1429452

#SPJ1

Answer:

Explanation:

The chemical name for MoO3 is molybdenum trioxide.

answer : 0.00042 mol/L

steps:

Concentration = moles ÷ liters

Concentration = (number of moles) / (volume in L)

Concentration = 0.000188 mol / 0.450 L = 0.000417 mol/L

The concentration of the calcium bromide solution is 0.00042 mol/L (rounded to 3 significant figures).

The first step is to calculate the number of moles of calcium bromide in the solution:

Number of moles = (mass of CaBr2) / (molar mass of CaBr2)

The molar mass of CaBr2 is:

1 x atomic mass of Ca + 2 x atomic mass of Br = 1 x 40.08 g/mol + 2 x 79.90 g/mol = 199.88 g/mol

The mass of CaBr2 is given as 188.μmol, which is equivalent to 188 x 10^-6 mol.

Therefore, the number of moles of CaBr2 in the solution is:

Number of moles = (188 x 10^-6 mol) / (1 mol/ 1000 μmol) = 0.000188 mol

The volume of the solution is given as 450 mL, which is equivalent to 0.450 L.

Therefore, the concentration of the solution is:

Concentration = (number of moles) / (volume in L)

Concentration = 0.000188 mol / 0.450 L = 0.000417 mol/L

The concentration of the calcium bromide solution is 0.00042 mol/L (rounded to 3 significant figures).

ChatGPT

Other reactions that can occur during the reaction between ammonia and oxygen are:

1) Decomposition of ammonia: 2 NH3(g) → N2(g) + 3 H2(g)

2) Oxidation of nitrogen: 4 NO(g) → 2 N2O(g) + 2 O2(g)

3) Formation of nitrogen dioxide: 4 NO(g) + O2(g) → 2 NO2(g)

4) Combustion of hydrogen: 2 H2(g) + O2(g) → 2 H2O(g)

These reactions can occur under different conditions, such as high temperature or pressure, or the presence of catalysts.

A material that catalyzes a chemical reaction does so without being consumed or altered. Its function is to reduce the activation energy necessary for a reaction to happen, enabling the reaction to occur more rapidly and readily. By offering a different reaction pathway with a lower activation energy, catalysts enable the reactants to achieve the transition state and progress more quickly in the direction of the product. Catalysts can be used to speed up otherwise too-sluggish reactions or to create desired products from undesirable or unwanted ones. They are utilized in many commonplace products, such as automotive catalytic converters, and are essential in numerous industrial procedures.

To know more about catalysts, check out:

https://brainly.com/question/27901111

#SPJ1

a)possesses a negative charge - electron

b)has no charge - neutron

c)has a mass slightly less than that of a neutron - proton

d)has a charge equal to, but opposite in sign from, that of an electron - proton.

What has a negative charge?

Electrons have a negative charge. The charge on the proton and electron are exactly the same size but opposite. Neutrons have no charge. Since opposite charges attract, protons and electrons attract each other.

What are the four properties of neutrons?

Neutrons are neutral particles – with no net electric charge.

Neutrons have a non-zero magnetic moment.

Free neutrons (outside a nucleus) are unstable and decay via beta decay.

Is a neutron's mass slightly less than a proton's?

The mass of a neutron is slightly greater than the mass of a proton, which is 1 atomic mass unit (AMU).

Is the charge of an electron opposite to the charge of a proton?

Electrons and protons have equal and opposite charges. The magnitude of this charge is 1.6×10−19 Coulomb.

To know more about protons, neutrons, and electrons:

https://brainly.com/question/29248303

#SPJ4

For an addition reaction, why does the free energy term, G, become more positive with increasing temperature because the positive entropy term dominates at high temperature. So, option A is correct.

In an addition reaction, the free energy, G, is influenced by both the enthalpy, H, and entropy, S, terms. As temperature increases, the entropy term becomes more positive, while the enthalpy term remains relatively constant. At high temperatures, the positive entropy term dominates, causing the free energy, G, to become more positive. This means that the reaction becomes less favorable and less likely to occur.

The entropy term reflects the number of available molecular arrangements in a system and the degree of disorder. At high temperatures, the molecules have more kinetic energy and are more likely to be in disordered states. This results in a larger entropy term and a more positive G.

In contrast, the enthalpy term reflects the heat energy involved in a reaction and the bond-forming or bond-breaking nature of the reaction. At high temperatures, the enthalpy term remains relatively constant, as the reaction is not affected by changes in temperature.

In summary, the positive entropy term dominates at high temperature, causing the free energy, G, to become more positive and the reaction to become less favorable.

You can learn more about free energy at

https://brainly.com/question/27686274

#SPJ4