What is a polyatomic ion definition?

Exergonic reactions are reactions that release energy, typically in the form of heat, and have a negative Gibbs free energy change (ΔG). Option B) (The reactions proceed with a net release of free energy) is the right answer.

This means that the free energy of the products is lower than the free energy of the reactants, and the difference is released as usable energy. The net release of free energy makes exergonic reactions spontaneous and capable of doing work, such as driving endergonic reactions or powering cellular processes.

Option A is incorrect because the products of exergonic reactions have less total energy than the reactants. Option C is incorrect because the rate of exergonic reactions varies and can be slow or fast depending on the reaction. Option D is incorrect because there is no such thing as an "exergame."

Want to know more about exergonic reactions visit the link which is given below;

https://brainly.com/question/270229

#SPJ4

The solution's freezing point is higher than the solvent's pure freezing point. The solution has a boiling point that is greater than a pure solvent.

The boiling point of a solvent increases and the vapour pressure decreases when a nonvolatile solute is added. A substance that does not readily evaporate is referred to as a nonvolatile solute.

When non-volatile substances are added to a solvent, the vapour pressure is reduced, and the solute particles have an impact on how pure solvent crystals form. According to numerous studies, the amount of solutes dissolved in the solvent directly correlates to the drop in freezing point. The vapour pressure of a non-volatile solute drops when it is dissolved in a volatile solvent.

Therefore, the correct answer is option

(a) The freezing point of the solution is higher than that of the pure solvent.

(C) The boiling point of the solution is higher than that of pure solvent.

To learn more about freezing point refer to:

https://brainly.com/question/40140

#SPJ4

You find a mineral sample that is yellow, has a white streak, and has a hardness of 2.5 therefore the sample is most likely a mineral known as calcite and is therefore denoted as option B.

This is referred to as a carbonate mineral and the most stable polymorph of calcium carbonate. It is a very common mineral, particularly as a component of limestone.

It has a hardness in the region of 3 and is yellow, has a white streak in terms of the color and appearance and is therefore the reason why it was chosen as the correct choice.

Read more about Calcite here https://brainly.com/question/3817092

#SPJ1

The mass of sulfuric acid in 2.00 mL of 18.5 M [tex]H_{2} SO_{4}[/tex] is 37.0 mg. Sulfuric acid has a molar mass of 98 g/mol.

To calculate the mass of sulfuric acid in 2.00 mL of 18.5 M [tex]H_{2} SO_{4}[/tex], we need to first convert the volume from milliliters to liters and then multiply that by the concentration in moles/liter. Then, we can multiply the number of moles by the molar mass to get the mass in grams. The mass of 2.00 mL of 18.5 M [tex]H_{2} SO_{4}[/tex] is:

Learn more about  concentrated sulfuric acid:

https://brainly.com/question/8673785

#SPJ4

Answer:

369.20 grams of NaOH are required to produce 9.23 moles of NaCl.

Explanation:

To answer this question, we need to know the balanced chemical equation for the reaction between NaOH and HCl, assuming that the reaction takes place in an aqueous solution:

NaOH + HCl → NaCl + H2O

According to this equation, 1 mole of NaOH reacts with 1 mole of HCl to produce 1 mole of NaCl and 1 mole of water.

To calculate the amount of NaOH required to produce 9.23 moles of NaCl, we need to use the mole ratio between NaOH and NaCl from the balanced equation. Since the mole ratio is 1:1, we know that we need 9.23 moles of NaOH to produce 9.23 moles of NaCl.

The molar mass of NaOH is 40.00 g/mol, which means that 1 mole of NaOH weighs 40.00 grams. Therefore, 9.23 moles of NaOH weighs:

9.23 moles x 40.00 g/mol = 369.20 grams of NaOH

So, 369.20 grams of NaOH are required to produce 9.23 moles of NaCl.

The boiling point of the H₂ is the  20 K 0r the –423 ºF; or the –253 ºC .

The boiling point is defined as the temperature of the liquid at which its vapor pressure will be equal to the pressure of the gas or the above it. The normal boiling point of the liquid is the temperature at which the vapor pressure is equal to the one atmosphere or the 760 torr. The boiling point of the substance is the temperature when the vapor pressure of the liquid is equals to the pressure of the surrounding the liquid and the liquid will changes into the  vapor.

Thus in the kelvin the boiling point of the H₂ is the  20 K.

To learn more about boiling point here

https://brainly.com/question/2153588

#SPJ4

When an alkene is treated with H2H2, the addition can occur from either face of the double bond, resulting in two different stereoisomers.

This is known as syn addition because the two hydrogen atoms are added to the same face of the alkene. The stereoisomers that result from the addition of H2 to an alkene will depend on the specific alkene and the arrangement of its substituents.

For example, when 1,2-dimethylcyclohexene is treated with H2H2, two stereoisomers are formed: (1R,2S) and (1S,2R). These stereoisomers can be differentiated by their molecular configurations, which are determined by the arrangement of the substituents on the cyclohexene ring and the position of the hydrogen atoms on the double bond.

Similarly, other alkenes will give rise to different stereoisomers upon syn addition of H2, depending on the specific alkene and its substituents.

To learn more about Stereoisomers:

https://brainly.com/question/16986110

#SPJ4

In acid-base titration, the equivalence point is the point at which the acid and base are stoichiometrically balanced and neutralize each other.

At this point, the moles of acid are equivalent to the moles of base, and the solution is neither acidic nor basic. The equivalence point is often identified by a sudden and sharp change in pH.

Unlike the endpoint, which is determined using indicators, the equivalence point is calculated mathematically based on the stoichiometry of the reaction. However, the two points may not always coincide due to the nature of the indicators or the presence of impurities in the sample.

To find the equivalence point, one can plot the titration curve by plotting the pH of the solution against the volume of titrant added. The equivalence point is the midpoint of the steepest part of the curve, where the pH changes most rapidly. It is essential to distinguish between the endpoint and the equivalence point as they mark different stages in the titration process and can affect the accuracy of the results.

Find out more about   acid-base titration

brainly.com/question/29036708

#SPJ4

The examples of the mixture of the elements is the Brass, it is the  example of a mixture of the two elements that is the  copper and the zinc.

The Brass is the example of the mixture of the two elements the one is  copper and the other is  zinc. The brass can contain the little as the 10%, or as much as the 45%, zinc. The difference in between the compounds and the mixtures of the elements are the ease that with which the elements will be separated.

The mixture of the elements are consists of the two or the more different elements and the compounds that physically intermingled.

To learn more about elements here

https://brainly.com/question/14347616

#SPJ4

Answer:

calcium oxide

Explanation:

Correct option is A)

Magnesium metal is an alkaline earth metal. The tendency of these metals is to lose electron. They lose electron and form oxide. Now, they are stable hence it is very difficult for them to again gain that electron. Hence, they are not reduced by normal reducing agents.

The energy movement from solid liquid to gas is always going up and moving faster. A solid is a tight definite shape where the molecules are all stuck in one place and there’s barely energy and movement. The liquid has a more free space since it does not have a definite volume energy moves around quicker. The gas phase would have energy going everywhere Becuase it doesn’t have a definite shape and volume. As temperature goes up the kinetic energy also goes up

The term used to describe breaks in the Earth's crust by which rocks move or slide past one another is "fault." Faults can be caused by tectonic plate movement.

Faults generates stress on the Earth's crust. When the stress becomes too great, the rocks along the fault plane can break and move, resulting in an earthquake. There are different types of faults, including normal faults, reverse faults, and strike-slip faults, depending on the direction of movement between the rocks.

Faults are essential in shaping the Earth's surface, and studying them can help geologists better understand the past and future movements of tectonic plates.

To know more about tectonic plate movement:

https://brainly.com/question/28988009

#SPJ4

Dipole-dipole interaction pales in comparison to the strength of the polar covalent bond. Whereas the latter is known as an intermolecular attraction.

What does a covalent bond's shared pair represent?

Equal shares of electrons from the two involved atoms result in the formation of a covalent bond. This sort of bonding's electron pair is known as the shared pair or binding pair.

Why is it called covalent?

See Covalent for other uses (disambiguation). A chemical bond known as a covalent bond entails the exchange of two electrons between atoms. When atoms share electrons, a stable equilibrium of the repellent and attractive forces between them is known as bond formation. These pairs of electrons are also known as pairs that are shared or bonding pairs.

To know more about covalent visit:

https://brainly.com/question/30261436

#SPJ1

The molar mass of Ammonium phosphate is 149.08674 g/mol.


Ammonium phosphate is a chemical compound with the formula (NH₄)₃PO₄. It is made up of three ammonium ions (NH⁴⁺) and one phosphate ion (PO⁴⁻).

To find the molar mass of Ammonium phosphate, we need to add the molar masses of all the atoms in the compound. The molar mass of an atom is the mass of one mole of that atom.

The molar mass of Ammonium phosphate is:

3 x (molar mass of NH⁴⁺) + (molar mass of PO⁴⁻)

= 3 x (14.007 + 4 x 1.008) + (30.974 + 4 x 15.999)

= 3 x 18.039 + 94.971

= 54.117 + 94.971

= 149.08674 g/mol

Therefore, the molar mass of Ammonium phosphate is 149.08674 g/mol.

To know more about  molar mass here:

https://brainly.com/question/12127540#

#SPJ11

The electronic configuration of the calcium, Ca is as :

1s² 2s² 2p⁶ 3s² 3p⁶ 4s² .

The atomic number of the calcium is 20. The total  number of the protons are 20 , the number of the electrons are 20, and the number of the neutrons are 40. The electronic configuration of the calcium is as follows :

The electronic configuration of calcium, Ca = 1s² 2s² 2p⁶ 3s² 3p⁶ 4s²

The Calcium is the mineral most often it is associated with the healthy bones and the teeth.  It is belongs to the group 2 that is the metal, it is also known as the alkaline earth metal, and it had no populated d-orbital electrons.

To learn more about electronic configuration here

https://brainly.com/question/29757010

#SPJ4

All 435 members of the United States House of Representatives are up for re-election in each election cycle, which occurs every two years.

This means that every seat in the House of Representatives is up for grabs in the regular congressional elections that are held in November of even-numbered years. Each state is divided into congressional districts based on population, and each district elects one representative to serve in the House.

The terms of representatives are two years long, so all representatives must run for re-election every two years if they wish to continue serving in the House.

To learn more about election cycle  refer to:

brainly.com/question/14319666

#SPJ4

The offered statement states that oxygen atoms are bonded to hemoglobin when it is in the R state.

The molecules that make up the human body are incredibly diverse, but they are all combinations of just a few dozen basic constituents: the elements of period 3 that are chemical. However, there are significant differences in each atom's abundance.

Chemical bonds, which are required for the existence of chemicals, are the temporary connections that bind compounds together. London dispersion forces and ionic, solid, and hydrogen bonds are examples of chemical bonding.

To know more about Molecules visit:

https://brainly.com/question/26556885

#SPJ4

The electron geometry of BrF₅ is octahedral and the molecular geometry is square pyramidal.

To determine the electron and molecular geometry of BrF₅ , we can use the VSEPR theory. The VSEPR theory predicts the arrangement of electron pairs around a central atom and the resulting molecular geometry.

1. Determine the number of valence electrons for BrF5. Br has 7 valence electrons and each F has 7 valence electrons, so the total number of valence electrons is 7 + (5 x 7) = 42.

2. Draw the Lewis structure for BrF₅ . Place the Br atom in the center and the F atoms around it. Each F atom will form a single bond with the Br atom, using 2 electrons for each bond. This leaves 22 valence electrons, which will be used to form lone pairs around the F atoms.

3. Determine the electron geometry. The Br atom is surrounded by 5 bonding electron pairs and 1 lone pair, giving a total of 6 electron pairs. The electron geometry for 6 electron pairs is octahedral.

4. Determine the molecular geometry. The Br atom is surrounded by 5 bonding electron pairs and 1 lone pair, giving a total of 6 electron pairs. The molecular geometry for 5 bonding pairs and 1 lone pair is square pyramidal.

To know more about BrF₅ here:

https://brainly.com/question/28298899#

#SPJ11

Carbon is a non-metal because, in its elemental state, it cannot form a metallic bond and conduct electricity.

Carbon is a non-metal since it lacks characteristics of metals including ductility, lustre, malleability, electrical conductivity, etc. Moreover, it creates covalent bonds. Carbon is a non-metallic, solid element. Diamond and graphite are two extremely distinct types of pure carbon that may occur.

A metal is a substance that has a shiny look when freshly processed, polished, or shattered, and conducts electricity and heat rather effectively. Carbon lacks the malleability and ductility that are generally seen in metals, which may be hammered into thin sheets or dragged into wires.

To know more about carbon, visit,

https://brainly.com/question/19083306

#SPJ4

Answer:

They don't have to deal with the Earth's atmosphere

Explanation:

Space telescopes have the advantage of being above the blurring effects of the Earth's atmosphere

The majority of liquids freeze through crystallisation, which is the development of crystalline solid from the homogeneous liquid.

Because the oxygen atom draws a greater proportion of electrons, the water molecule is slightly positive on one side and slightly negative on the other. The hexagonal crystal lattice is formed when bipolar molecules in water freeze and are drawn near one another.

When a liquid's molecules slow down enough to attract one another and organise themselves into stable places as a solid, freezing happens. Salt water is cooled to create pure ice crystals during the freezing process, also known as crystallisation.

When atoms, molecules, or ions are grouped in a highly ordered microscopic structure, the result is a substance known as a crystal. Chemical bonds such as metallic bonds, ionic bonds, covalent bonds, van der Waals bonds, and others serve as the interatomic forces that hold these components together.

To learn more about crystal structure refer to:

https://brainly.com/question/195576

#SPJ4

In light of this, the rms speed of cesium atoms at a temperature of 120 nK is roughly 107 m/s.

Because it was formerly believed that atoms were the smallest objects in the world and could not be separated, the word "atom" is derived from the Greek word for "indivisible." Chemistry's fundamental building block is an atom. It is the tiniest portion of matter within which charged particles could be released

Protons, neutrons, & electrons surround the central nucleus of an atom, which is what makes up an atom. The fission process, which divides uranium into smaller atoms, produces new atoms. The Big Bang and Supernova occurrences demonstrate the massive amount of atoms that were created. As the universe grew larger and cooled, events slowed down. It took 380,000 years for the first atoms to form after electrons were locked in orbits around nuclei. These mostly consisted of helium and hydrogen, which continue to be the universe's two most plentiful components.

The following formula can be used to determine the root mean square (rms) speed of cesium atoms that have been cooled to a temperature of 120 nK:

v = sqrt((3kT)/m)

where m is the mass of a cesium atom, T is the temperature in Kelvin, k is the Boltzmann constant, and v is the rms speed.

The mass of a cesium atom is approximately 132.91 atomic mass units (amu), which is equivalent to 2.2067 x 10^-25 kg.

When we change the values, we obtain:

v = sqrt((3 * 1.38 x 10^-23 J/K * 120 x 10^-9 K) / 2.2067 x 10^-25 kg)

v = 107 m/s

To know more about Atoms visit:

https://brainly.com/question/1566330

#SPJ4

A total of 0.96 liters of glycerin should be added to 12 liters of an 8% glycerin solution to result in a solution containing 16% glycerin.

To determine the amount of glycerin that should be added to 12 liters of an 8% glycerin solution to result in a solution containing 16% glycerin, we can use the formula for dilution:

In this case, C1 is the original concentration of glycerin (8%), V1 is the original volume of the solution (12 liters), C2 is the desired concentration of glycerin (16%), and V2 is the final volume of the solution.

Learn more about Glycerin:

https://brainly.com/question/14012268

#SPJ4

The generic name of the gabapentin is the  Neurontin. The Gabapentin is used to treat the epilepsy.

The generic name of the gabapentin and It is also taken for the nerve pain, and which can be caused by the different conditions, it also diabetes and the shingles. The Nerve pain can also be happen after the injury. The Gabapentin is generally used to treat the some types of the nerve pain but it is also classified as the anticonvulsant medicine, but it is not used as the opioid or the painkiller.

Thus, the Neurontin is the generic name of the gabapentin.

To learn more about gabapentin here

https://brainly.com/question/27961103

#SPJ4

The oxidation number  of the manganese atom in MnO₄⁻ is 7.Oxidation number can be negative,zero or positive.

Oxidation number in basic terms can be depicted as the number that is distributed to components in a synthetic blend. The oxidation number is fundamentally the include of electrons that iotas in a particle can share, lose or acquire while framing substance securities with different molecules of an alternate component.

Oxidation number is likewise alluded to as oxidation state. Nonetheless, some of the time these terms can have an alternate importance relying upon regardless of whether we are thinking about the electronegativity of the atoms. The oxidation number term is utilized often in coordination science.

So,oxidation number of Mn in MnO₄⁻=x+(-2) ˣ 4 =-1

=>x-8=-1

=>x=-1+8

=>x=7

Hence,oxidation number of Mn in MnO₄⁻ is 7.

To know more about oxidation number,visit here:

https://brainly.com/question/3035498

#SPJ4

As starting materials have a higher entropy than products, all Diels-Alder processes may be reverted to initial diene and dienophile at sufficiently high temperatures.

Cycloaddition reversibility is one of the factors that contribute to endo-selectivity loss. Cycloreversion reactions are particularly common in aromatic dienes (such as furan and anthracene). Retro-Diels-Alder reactions can be utilised to create reactive olefins or other -bonds utilising flash vacuum pyrolysis.

For this purpose, anthracene, 9,10-dimethylanthracene, cyclopentadiene, and dimethylfulvene seem to be particularly suitable. If heated enough, the product of a Diels-Alder reaction can undergo a reverse reaction that recharges the initial konnect and generates a set (which both happen to be cyclopentadiene in this case). The backward (or "retro") reaction seems to be the Diels-Alder reaction.

Learn more about Diels Alder reaction at

https://brainly.com/question/30751490

#SPJ4

The name of the organic compound CH₃CH₂CH₂CH₃ is butane.

Butane is an alkane with four carbon atoms and a straight chain. The prefix "but-" indicates four carbon atoms, and the suffix "-ane" indicates that the molecule is an alkane with all single bonds between the carbon atoms.

The molecular formula for butane is C₄H₁₀. Butane is a highly flammable gas at room temperature and pressure, and it is commonly used as a fuel for lighters, camping stoves, and other portable heaters. It is also used as a refrigerant, propellant, and solvent in various industrial applications.

It is a member of the homologous series of alkanes, which have the general formula CnH₂n+2, where n is the number of carbon atoms in the molecule.

To know more about organic compound here

https://brainly.com/question/5994723

#SPJ4

The energy absorbed by the chemical reaction is 200 kJ. 200 kJ is the thermal energy that moves inward from the air or the walls of the container. Therefore, the correct option is option D.

Thermal energy is a sort of kinetic energy since it is generated by particle movement. Kinetic energy refers to the energy that an item possesses as a result of its motion. The more the form of heat of a body, the faster its atoms, molecules, or atoms travel.

A chemical reaction is carried out in a closed container. The energy absorbed by the chemical reaction is 200 kJ. 200 kJ is the thermal energy that moves inward from the air or the walls of the container.

Therefore, the correct option is option D.

To know more about thermal energy, here:

https://brainly.com/question/3022807

#SPJ1