The use of the chemical is regulated when a chemical is determined to be dangerous.
What occurs if a chemical is found to be harmful?
According to the consequences of its physical characteristics, a chemical is deemed hazardous. Chemical risks are more likely to burn, combust, or combine with other compounds, such as gasoline, whose fumes can ignite explosively.
Why do chemicals pose a risk?
Because they can harm us when they enter or come into touch with the body, chemicals can be poisonous. Your health may be impacted if you are exposed to a harmful material like gasoline. Gasoline is poisonous because ingesting it can result in burns, nausea, vomiting, diarrhea, and, in very large doses, drowsiness or even death.
Know more about chemical- brainly.com/question/12678592
#SPJ1
What does soluble and insoluble mean in chemistry?
Solids that are soluble in a liquid are said to be soluble solids. Solids that cannot dissolve in water are known as insoluble solids.
What is the meaning of soluble or insoluble?I Compounds that disintegrate in a particular liquid to form a solution are known as soluble solids. I Solids that cannot dissolve in the water are referred to as insoluble solids. These insoluble substances either floating or sink when added to water, but they do not mix with that as well.
What is insoluble water?Something like this that won't disintegrate in a solvent is said to be insoluble. Rarely does a solute not dissolve at all. However, many compounds are not very soluble. Examples include sand, lipids, timber, metals, and plastic.
To know more about insoluble visit:
brainly.com/question/24300575
#SPJ4
How do you find the permanent dipole moment of a molecule?
The permanent dipole moment of a molecule can be calculated using the following steps:
Determine the bond dipolesDetermine the molecular geometryCalculate the net dipole momentWhat are dipoles?A dipole is an electrically charged object with a positive and a negative pole, such that the positive and negative charges are separated by some distance. A molecule with a net separation of positive and negative charges is referred to as a polar molecule or a molecular dipole.
Determine the bond dipoles: Identify the polar covalent bonds in the molecule and calculate the bond dipole moment for each bond by multiplying the bond order (number of shared electrons) by the electronegativity difference between the bonded atoms.Determine the molecular geometry: The molecular geometry determines the orientation of the bond dipoles and the arrangement of the atoms in the molecule. This information is needed to calculate the net dipole moment of the molecule.Calculate the net dipole moment: Using the bond dipoles and molecular geometry, calculate the net dipole moment of the molecule by adding the bond dipole moments vectorially. The magnitude of the net dipole moment is the permanent dipole moment of the molecule.Note: The permanent dipole moment is a measure of the net separation of positive and negative charges in a molecule, and it can be expressed in Debye units (D). It is a fundamental property of a molecule that determines its ability to interact with electric or magnetic fields.
To learn more about dipoles:
https://brainly.com/question/11626115
#SPJ4
A cube of moist soil has a water content of 25%, a specific gravity of solids of 2.7, a total weight of 215 lbs, and a volume of 2 ft. Calculate the saturation, total unit weight, void ratio and porosity.
The saturation is 33%, the total unit weight is 107.5 lbs/ft^3, the void ratio is 0.43 and the porosity is 30%.
To calculate the saturation, we need to find the weight of water in the soil, which is 25% of the total weight of 215 lbs. So, the weight of water is 25/100 * 215 lbs = 53.75 lbs.
Next, we find the weight of solids in the soil, which is 215 lbs - 53.75 lbs = 161.25 lbs.
The saturation (S) is the ratio of the weight of water to the weight of solids in the soil and is calculated as follows:
S = 53.75 lbs / 161.25 lbs = 0.33 or 33%.
The total unit weight of the soil can be calculated using the following formula:
γ = (W_water + W_solids) / V
where W_water is the weight of water, W_solids is the weight of solids, and V is the volume of the soil.
Substituting the values, we get
γ = (53.75 lbs + 161.25 lbs) / (2 ft^3) =
= 215 lbs / (2 ft^3) = 107.5 lbs/ft^3
The void ratio (e) is the ratio of the volume of voids in the soil to the volume of solids in the soil, and can be calculated as follows:
e = V_voids / V_solids = (V - V_solids) / V_solids = (V - W_solids / γ_solids) / (W_solids / γ_solids)
Substituting the values, we get
e = (2 ft^3 - 161.25 lbs / 2.7) / (161.25 lbs / 2.7) = 0.43
Finally, the porosity (n) is the ratio of the volume of voids in the soil to the total volume of soil and is given by:
n = V_voids / V = e / (1 + e) = 0.43 / (1 + 0.43) = 0.43 / 1.43 = 0.30 or 30%.
Find out more about Saturation
brainly.com/question/30193270
#SPJ4
Explain why a molecule can have bond dipoles but not have a molecular dipole.
The presence of polar bonds in a molecule does not imply the presence of a molecular dipole. Carbon dioxide and carbon tetrachloride, for example, have polar bonds but no net molecular dipole.
What is the difference between bond dipoles and molecular dipoles?Bond polarity is related to the individual polarity of the bond in a molecule, whereas molecular polarity is the sum of all the bond polarities in the molecule.
If a molecule is completely symmetric, the dipole moment vectors on each molecule cancel each other out, resulting in a nonpolar molecule.
Thus, a molecule can have bond dipoles but not have a molecular dipole.
To learn more about the molecular dipoles, follow the link;
https://brainly.com/question/12020949
#SPJ1
if we increase the temperature of the vessel to 450 k at constant volume, what would the pressure inside the vessel be?
If we increase the temperature of the vessel to 450 k at constant volume, 15 atm would be the pressure inside the vessel. Therefore, the correct option is option D.
In chemistry, pressure is the force that a gas or liquid applies to the container's walls. It happens as a result of molecules of a gas or liquid slamming into the surface of the container. One of the gas laws that explains the relationship between pressure and temperature of a gas at constant volume is Gay-Lussac's Law, sometimes referred to as the pressure-temperature law. It has the name of Joseph Louis Gay-Lussac, a French chemist who developed the law at the beginning of the 19th century.
P1/T1 = P2/T2
P2 = (P1 × T2)/T1
P2 = (10 atm ×450 K) / 300 K
P2 = 15 atm
Therefore, the correct option is option D.
To know more about pressure, here:
https://brainly.com/question/30673967
#SPJ12
Your question is incomplete but most probably your full question was,
We are studying the properties of a 10 L vessel of an ideal gas at 300 K and 10 atm of pressure inside. We can fix the volume or the pressure of the vessel as we like. If we increase the temperature of the vessel to 450 K at constant volume, what would the pressure inside the vessel be?
Group of answer choices
10 atm
5 atm
20 atm
15 atm
KHP is more basic than citric acid. Since you had to go to the trouble of standardizing the NaOH solution against KHP anyways, why can’t the lemon juice be titrated with KHP solution in the first place?
Titration is a technique used to determine the concentration of a solution by slowly adding a solution of known concentration to the unknown solution until a reaction is complete. In acid-base titration, a common example of which is titrating lemon juice with a sodium hydroxide (NaOH) solution, the endpoint of the reaction is usually indicated by a color change or by the measurement of the solution's pH.
In the case of titrating lemon juice with a sodium hydroxide solution, a primary standard like potassium hydrogen phthalate (KHP) is often used to standardize the NaOH solution. This is because KHP is a highly pure, crystalline solid that is easy to dissolve and has a known molar mass, making it an ideal substance for accurately determining the concentration of the NaOH solution.
While it is possible to titrate lemon juice directly with KHP, it is not ideal for several reasons. Firstly, lemon juice is not a pure substance and contains other components such as sugars, enzymes, and organic acids that can interfere with the accuracy of the titration. Secondly, the reaction between KHP and lemon juice is complex, involving multiple steps that can make it difficult to determine the endpoint of the reaction.
In contrast, the reaction between NaOH and lemon juice is relatively simple and straightforward, producing a clear endpoint that is easily detected. By standardizing the NaOH solution against KHP first, scientists can ensure that the concentration of the NaOH solution is accurately known, making it possible to obtain more precise and reliable results when titrating lemon juice.
Here you can learn more about Titration
https://brainly.com/question/2728613#
#SPJ11
water molecules stick to other water molecules because
The electronic configuration of calcium is 2,8,8,2. So why we can't write it as 2,8,9,1?
It is due of this order of atomic orbital filling that calcium has an electrical configuration of 2, 8, 8, 2, rather than Your knowledge of atomic structure will increase.
What is an atom's atomic number?
An atomic number of an atom is determined by counting all the protons in its nucleus. It is symbolized by the letter "Z." A specific element's atoms each possess the same atoms since all of its protons are the same. Atomic numbers vary among atoms belonging to various elements.
How can you determine an element's atomic weight?
Discovering Relevant Information the atomic weight, please. Usually, the molecular weight is printed.
To know more about atomic visit:
https://brainly.com/question/1566330
#SPJ4
what is a triglyceride? multiple choice question. a molecule consisting of three fatty acids bonded to a glycerol a three-carbon alcohol molecule a waxy lipid found in all body cells a fatty acid molecule containing three carbon-carbon double bonds
Option A – A triglyceride is a molecule consisting of three fatty acids bonded to a glycerol.
A triglyceride is a type of fat molecule made up of a glycerol molecule and three fatty acid molecules. Triglycerides are the most common type of fat found in food and are also stored in the body as a source of energy. When we eat foods high in fat, the body breaks down the triglycerides into their component fatty acids and glycerol and uses them as fuel. If we eat more fat than we can burn, the body stores the excess as body fat, which can contribute to obesity and other health problems if it accumulates in large amounts. Triglycerides play a role in the development of heart disease and other health problems, and their levels can be measured through a blood test. A high triglyceride level, combined with low levels of "good" cholesterol (HDL), can increase the risk of heart disease, stroke, and other health problems. Maintaining a healthy diet, getting regular exercise, and managing stress can help to keep triglyceride levels in check.
To know more about triglyceride, click here : https://brainly.com/question/15325232
#SPJ4
The body of a victim is discovered in the woods during a week with unusually cold weather. What should a forensic scientist consider when estimating the rate of decomposition of the body tissues of the victim?
The temperature would not need to be considered.
The tissues decompose at a slower rate at lower temperatures.
The tissues decompose at a faster rate at lower temperatures.
The tissues would not decompose at all at a lower temperature.
Answer:
The tissues decompose at a slower rate at lower temperatures.
Explanation:
This is my best guess but I think answer is tissue decompose slower rate at low temperature. This is why we in medicine we store specimens at very low temperature so we can do research on it at a later time but they eventually go bad. Low temperature slow down enzymes and proteins thus breakdown is slower rate.
How do you calculate heating and cooling curve?
The equations q = mcT, whereby m is the test mass, c is the absolute temperature, and T is the change in temperature, may be used to quantify the amount of hot air received or dissipated by a test (q).
The mass simple answer is what?A thing's mass is just how much matter it has. Something will weigh more the more matter it includes. For illustrate, an elephant pounds more than a mouse because it has more stuff.
In physics, what do mass and mass mean?A measurement of an object's kinetic attribute, or how much matter it contains, is the entity's mass. The force of gravity falling on an item is measured by its weight.
To know more about mass visit:
https://brainly.com/question/11681718
#SPJ4
A 5.0 liter container at 20.0oC has 4 gases pumped in. The total pressure of the gases is 4.09 atm. If the pressure of the first gas is 1.00 atm, and the pressure of the second gas is 0.940 atm, the pressure of the third gas is 0.870 atm, what is the pressure of the fourth gas in atmospheres?
The pressure of the fourth gas in atmospheres is1.28 atm.
What does a gas's pressure mean in physics?
The force created when gas particles collide with the wall of their container is known as gas pressure. Force is applied to a region to create pressure. The force that a gas applies to a particular area is known as gas pressure. The amount of force applied to a certain region is referred to as pressure. Gases produce pressure, or force per unit of area. In addition to torr, atmosphere, and bar, the pressure of a gas can also be stated in many additional SI units, such as pascal or kilopascal.
Know more about pressure- brainly.com/question/25736513
#SPJ1
when a high energy electron impacts molecule m in the ionization chamber, what type of species is initially produced?
A radical cation is initially produced when a high energy electron impacts molecule M in the ionisation chamber.
When a high energy electron collides with molecule "m" in an ionisation chamber, it can produce a number of species, including electrons, ions, and neutral species. The most common species, however, is an ion pair, which consists of a positively charged ion (cation) and a negatively charged electron (anion). This is because the impacting electron has a high energy and can knock an electron out of the molecule, leaving a positively charged ion (cation) behind. The produced ion pair is then detected and used to calculate the energy and intensity of the electron beam in the ionisation chamber. Ionisation chambers are devices that detect and measure ionising radiation. It generates charged particles, typically ion pairs, inside the chamber by using ionising radiation. The energy and intensity of the ionising radiation can then be calculated using these charged particles.
To know more about what happens inside an ionisation chamber, click here : https://brainly.com/question/17961146
#SPJ4
What is potassium iodide formula used for?
Potassium iodide is used to avoid the loss of iodine due to oxidation from salts
What are compounds ?
A compound is a substance consisting of two or more elements chemically combined in a fixed ratio. They differ from mixtures consisting of two or more substances physically mixed without chemical bonding. Compounds have their own physical and chemical properties that differ from those of individual elements. For example, the compound water (H2O) has different properties (boiling point, density, solubility, etc.) than its components hydrogen (H2) and oxygen (O2).
Compounds are formed by chemical reactions in which atoms of different elements combine to form new substances. The formation of a compound can be represented by a chemical formula that indicates the type and number of atoms in the compound.
To know more about compounds , click the link below ;
brainly.com/question/26487468
#SPJ4
Molecular polarity question
Explain why a molecule can have bond dipoles but not have a molecular dipole.
The presence of polar bonds in a molecule does not imply the presence of a molecular dipole. Carbon dioxide and carbon tetrachloride, for example, have polar bonds but no net molecular dipole.
What is the difference between bond dipoles and molecular dipoles?Bond polarity is connected to each bond's particular polarity in a molecule, but molecular polarity is the total of all the bond polarities in the molecule. This is the difference between bond dipoles and molecular dipoles.
A molecule will become nonpolar if it is entirely symmetric, as the dipole moment vectors on each molecule will cancel each other out.
Thus, a molecule can have bond dipoles but not have a molecular dipole.
To learn more about the molecular dipoles, follow the link;
brainly.com/question/12020949
#SPJ1
Cl2 + Na2S + 2NaCl + S
The percent yield of sulfur when 71. 0 g of Cl2 is reacted in
excess Na2S solution is 73. 0 %.
What is the actual mass of sulfur yielded by this reaction?
The actual mass of sulfur yielded by this reaction is 23.4 g
The quantity of moles of a product created in relation to the amount of reactant consumed during a chemical reaction is measured in chemistry as yield, also known as reaction yield. The actual yield is calculated as the theoretical yield multiplied by 100 to get the percent yield.
To find the yield percent we use the equation: percent yield = actual yield/theoretical yield x 100
The theoretical yield for S is as follows:
71. g Cl2 x 1 mol Cl 2 x 1 mol x 32.1 g = 32.1 g S
71 g Cl 1 mol S
Percent yield = actual yield/theoretical yield x 100
Actual yield = theoretical yield x percent yield
Actual yield = 32.1 X 73 % = 23.4 g S
Learn more about percentage yield at https://brainly.com/question/20376661
#SPJ4
hydrogen, nitrogen, and carbon are the elements that most readily form strong multiple bonds.
Orbitals of a molecule as the total of their atomic orbitals. The advantage is that electrons can be distributed widely across a molecule. Consider a molecule with resonance as an example.
What elements most readily form strong multiple bonds?Multiple bonds will form between nearby atoms. When two atoms share two electron pairs to create two covalent connections, they create a double bond; when they share three electron pairs to create three covalent bonds, they create a triple bond.
We understand more intuitively, instead. The delocalized electrons are distributed uniformly over the entire molecule. The ionization energies and emission and absorption spectra of a molecule are now better understood.
Therefore, Oxygen, nitrogen and carbon are the elements that most readily form multiple strong bonds.
Learn more about multiple bonds here:
https://brainly.com/question/25654403
#SPJ4
The above question is incomplete. The complete question is given below:
For each of the following false statements, change the statement to make it true.
Hydrogen, nitrogen, and carbon are the elements that can most readily form strong multiple bonds.
Orbitals of a molecule as the total of their atomic orbitals. The advantage is that electrons can be distributed widely across a molecule. Consider a molecule with resonance as an example.
What elements most readily form strong multiple bonds?Multiple bonds will form between nearby atoms. When two atoms share two electron pairs to create two covalent connections, they create a double bond; when they share three electron pairs to create three covalent bonds, they create a triple bond.
We understand more intuitively, instead. The delocalized electrons are distributed uniformly over the entire molecule. The ionization energies and emission and absorption spectra of a molecule are now better understood.
Therefore, Oxygen, nitrogen and carbon are the elements that most readily form multiple strong bonds.
Learn more about multiple bonds here:
brainly.com/question/25654403
#SPJ4
The above question is incomplete. The complete question is given below:
For each of the following false statements, change the statement to make it true.
Hydrogen, nitrogen, and carbon are the elements that can most readily form strong multiple bonds.
1. The reaction C2H4 + HBr to C2H5Br is carried out in continuous reactor. The product stream is analysed and found to contain 50 mole % C2H5Br and 33. 3% Br. The feed to the reactor contains only C2H4 and HBr. Calculate the fractional conversion of limiting reactant and the percentage by which the other reactant is in excess
In a continuous reactor, the materials are transported as a stream that is always running, allowing the reactants to be continuously supplied into the reactor and producing a stream of product in the process.
What is the identification of limiting reactant?Along with that, it ought to be necessary to know the mole counts of unreacted species. The amount of products created from each reactant can be compared in order to determine the limiting reactant.
When producing huge amounts of chemicals, a continuous reactor—also called a flow reactor—is employed.
Therefore, The mole number of the reactant and the finished product should be computed in order to determine the limiting reactant in a chemical reaction.
Learn more about limiting reactant here:
https://brainly.com/question/14225536
#SPJ4
______ is the spacing between character pairs.
answer choicesO Tracking
O Kerning
O Serif
Kerning is the spacing between individual letters or characters.
The distance between individual letters or characters is known as kerneling. In contrast to tracking, which modifies the spacing between each letter of a word in equal increments, kerning is concerned with the aesthetics of type, producing legible writing that is appealing to the eye.
Character spacing and kerning differ significantly in that character spacing is utilized between specific pairs of characters as specified in the typeface, and letter spacing is independent of the text it spaces.
Kerning is the process of manually adjusting the distance between two particular glyphs. A kerning pair is the same adjustment, but the type designer chooses it; the instructions are included in the font file itself.
Learn more about kerning here https://brainly.com/question/16937802
#SPJ4
how many oxygen atoms in cr(no3)3
Number of oxygen atoms in Cr(NO₃)₃ will be 9.
In Cr(NO₃)₃ the number of Cr atoms will be 1 and N atom will be 3. However, oxygen atoms will be 9.
Oxygen is the chemical element having symbol O and its atomic number will be 8. It is a member of the chalcogen group in the periodic table, a highly reactive nonmetal, and an oxidizing agent that can readily forms oxides with most elements as well as with other compounds. Oxygen is the third-most abundant element in the universe after hydrogen and helium. At standard temperature and pressure, the two atoms of the element bind to form dioxygen, a colorless as well as odorless diatomic gas having formula O₂.
To know more about oxygen here
https://brainly.com/question/13905823
#SPJ4
What is the ideal barometric pressure for humans?
According to Vanos, barometric pressure of 30 inches of mercury is the most comfortable for people (inHg). The risk of a heart attack increases as it climbs to 30.3 inHg or higher or falls to 29.7 inHg or lower.
High or low barometric pressure—which is worse?Inferring calm weather from higher pressure, whereas bad weather from low barometric pressure. Barometric pressure variations are used by meteorologists and sailors to forecast weather conditions.
What barometric pressure level qualifies as low?High pressure is often characterized by a barometer measurement of over 30.20 inHg and is linked to calm, clear skies. Low pressure is commonly defined as a barometer value of less than 29.80 inHg, and low pressure is linked to warm air and thunderstorms.
To know more about ideal barometric visit:-
https://brainly.com/question/12957311
#SPJ4
Consider 5.00 L of a gas at 365 mmHg and 20. ∘C . If the container is compressed to 2.70 L and the temperature is increased to 33 ∘C , what is the new pressure, P2 , inside the container? Assume no change in the amount of gas inside the cylinder.
Consider 5.00 L of a gas at 365 mmHg and 20.∘C . If the container is compressed to 2.70 L and the temperature is increased to 33 °C, the new pressure, P2 , inside the container is 563.372 mm Hg.
What is ideal gas law ?The ideal gas law, also known as the general gas equation, is the state equation for a hypothetical ideal gas. Although it has several limitations, it is a good approximation of the behavior of many gases under many conditions.
Apply ideal gas law
P1V1/T1 = P2V2/T2
365 × 5 / 293 = P2 × 2.70 / (33+273)
P = 365 × 5 /293 /2.70 × (33+273)
P = 563.372 mm Hg
Thus, the new pressure, P2 , inside the container is 563.372 mm Hg.
To learn more about an ideal gas law, follow the link;
https://brainly.com/question/30458409
#SPJ1
What is the formal charge on the oxygen atom in the structure below?
a. −
1
.
b. 0
.
c. +
1
.
d. +
2
.
The difference between the number of valence electrons an isolated atom of that element would have and the number of electrons it actually has in the molecule is defined as the formal charge on that atom in the molecule.
The formal charge is computed as follows:
Formal Charge = (Number of lone pair electrons + Number of bonding electrons / 2) Valence Electrons
The oxygen atom has six valence electrons in the structure you provided, four of which are bonding electrons and two of which are lone pair electrons. The formal charge on the oxygen atom is calculated as follows:
Formal Charge = 6 minus (2 + 4 / 2) = 6 minus (2 + 2) = 6 minus 4 = 2 minus 4 = -2
As a result, the oxygen atom in the structure has a formal charge of -2
To Learn More About oxygen click
https://brainly.com/question/13370320
#SPJ4
Is the subscript "1" usually written or understood?
Responses
A writtenwritten
B shownshown
C understoodunderstood
Is the subscript "1" usually understood. Therefore, option C is correct.
What is subscript ?A subscript is a character that is printed slightly below and to the side of another character, typically a letter or number. Subscripts are frequently used in chemical equations. A scientist would write the water formula, H2O, with the 2 lower and smaller than the letters on either side.
Subscripts indicate the proportion of atoms of various elements in the compound. Because the molecule contains four hydrogen atoms, the subscript 4 follows the symbol for hydrogen. When a symbol in a formula lacks a subscript, the number 1 is understood.
Thus, option C is correct.
To learn more about the subscript, follow the link;
https://brainly.com/question/16019591
#SPJ1
why is hcl used instead of plain deionized water in p-phenetidine in amide synthesis of acetophenetidin?
HCl is used instead of plain deionized water in p-phenetidine in amide synthesis of acetophenetidin because HCl's polarity contributes to a reaction driven to the right, it is used for the acid-base reaction rather than water. It protonates the amine group, allowing it to dissolve easily.
What is acid-base reaction ?An acid-base neutralization reaction is represented as a double-replacement reaction in this traditional representation. For example, the reaction of hydrochloric acid (HCl) with sodium hydroxide (NaOH) solutions yields a solution of sodium chloride (NaCl) and a few extra water molecules.
When acid and base react, they produce salt and water. Water and salt are both neutral, which means that when acid and base react, they neutralize each other. As a result, it is known as a neutralization reaction.
Thus, HCl's polarity contributes to a reaction driven to the right.
To learn more about an acid-base reaction, follow the link;
https://brainly.com/question/3069273
#SPJ1
a 20.0 ml sample of glycerol has a mass of 25.8 grams. what is the density of glycerol in ounces/quart?
Glycerol has a density of ounces/quart equal to. The mass of a sample of glycerol is grams. 1 ounce equals 28.4 grams.
What is Glycerol?Glycerol is a colourless, odourless, thick liquid generated from both animal and plant fats. It is also known as glycerin or glycerine. It is always found in a wide range of goods, including medications, personal hygiene products, food, and drinks. It is a natural moisturizer, fluid, and lubricant and is a key component of many fats.
Glycerol – a fat or a sugar?Glycerin is a type of carbohydrate known as a polyol, along with other sugar alcohols including sorbitol and erythritol. Glycerin feels sweet, just as sugar alcohols, which I've already discussed. Many living creatures require the sugar alcohol glycerol to survive. It is a part of lipids like phospholipids and glycerides, among others. Glycerol joins with fatty acids to create glycerides, which can act as an energy source.
To know more about glycerol, visit
brainly.com/question/29240183
#SPJ1
What is reactivity series of metals explain?
The reactivity series of metals is a series of metals, in order of reactivity from highest to lowest. It is used to determine the reactivity of a metal and the feasibility of replacing one metal with another in a chemical reaction. Metals that are higher in the series are more reactive and will displace those lower in the series. The most reactive metals, such as potassium, sodium, lithium, and calcium, are found at the top of the series. Metals such as lead, copper, and iron are found at the bottom and are the least reactive.
What is metals?
Metals are chemical elements that are characterized by their shiny appearance, malleability, electrical and thermal conductivity, and ductility. Metals are found in the Earth's crust and are abundant in the Earth's core. Commonly used metals include aluminum, copper, iron, tin, silver, gold, lead, and zinc.
To learn more about metals
Here: https://brainly.com/question/4701542
#SPJ4
what is the anion in koch2ch3?
The anion present in the compound , KOCH₂CH₃ is CH₃CH₂O⁻ .
The ions means that if the atom or the element carry the positive charge means it looses the electrons and form the cation and If the element or the compound carry the negative charge means that it gains the electrons and make the anion.
The compound is : KOCH₂CH₃
The cation present = K⁺
The anion cation = CH₃CH₂O⁻
The ionic compound is formed between the negatively charge anion and the positively charged cation. The ionic compound is formed by the complete transfer of the electrons.
Thus , the anion CH₃CH₂O⁻ is present in the compound KOCH₂CH₃.
To learn more about anion here
https://brainly.com/question/1659592
#SPJ4
An endothermic reaction that is spontaneous, respectively , in the forward direction is one that has a value and a I
CaCO3 + 2 HCl → CaCl2 + H2O + CO2 .An endothermic reaction is a reaction that absorbs energy from its surroundings.
What is energy ?Energy is the ability to do work. It is a fundamental quantity of nature and is found in many forms, such as kinetic energy, gravitational energy, electrical energy, and thermal energy. Kinetic energy is the energy of motion and is found in moving objects. Gravitational energy is the energy associated with the gravitational force and is found in objects that are close to each other. Electrical energy is the energy of electric fields and is found in charged particles. Thermal energy is the energy associated with temperature and is found in hot objects.
A spontaneous reaction is one that occurs without an outside energy source. A spontaneous reaction in the forward direction is one that proceeds in the direction, as written, without the need for an input of energy.
To learn more about energy
https://brainly.com/question/28324294
#SPJ4
What is the chemical formula of sodium phosphate?
The salt's chemistry is sodium phosphate. Na₃PO₄ Na3PO4 is the chemical name for sodium phosphate, and its molecular weight is 163.94 g/mol.
Is sodium phosphate N3PO4?
Sodium phosphate: Sodium phosphate, which has the chemical formula phospho soda Radiologists are familiar with Na3PO4 since it is frequently used as a cleanser before a double distinction barium enema.
Why is the sodium phosphate formula?
Na3PO4 is the chemical name for sodium phosphate, and its molecular weight is 163.94 g/mol.
To know more weight about:
https://brainly.com/question/10069252
SPJ4