Answer:
Lowers the freezing point
Explanation:
Lowers the freezing temp
"Freezing point depression is a colligative property observed in solutions that results from the introduction of solute molecules to a solvent. The freezing points of solutions are all lower than that of the pure solvent and is directly proportional to the molality of the solute."
Answer: The temperature at which the solution freezes is lowered
Explanation:
A gas has experienced a small increase in volume but has maintained the same pressure and number of moles. According to the ideal gas law, how has the temperature of the gas changed?
It has increased two times.
It has increased slightly.
It has decreased slightly.
It has stayed the same
According to the ideal gas law, if the volume experienced a small increase, the temperature increases slightly as well. (It has increased slightly.)
What is the ideal gas equation?It is an equation that relates the pressure (P), volume (V), number of moles (n) and temperature (T) of an ideal gas.
Let's consider the ideal gas law.
P × V = n × R × TA
T = P × V / n × R
According to the expression above, there is a direct relationship between volume and temperature. Thus, if the volume experienced a small increase, the temperature increases slightly as well.
Learn more about the ideal gas law here: https://brainly.com/question/25290815
#SPJ1
(ii) Calculate the maximum mass of ethanol that could be obtained
g from 30.0 g of glucose.
Taking into account the reaction stoichiometry, 15.33 grams ethanol could be obtained from 30 grams of glucose.
Reaction stoichiometryIn first place, the balanced reaction is:
C₆H₁₂O₆ → 2 C₂H₅OH + 2 CO₂
By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:
C₆H₁₂O₆: 1 mole C₂H₅OH: 2 molesCO₂: 2 molesThe molar mass of the compounds is:
C₆H₁₂O₆: 180 g/moleC₂H₅OH: 46 g/moleCO₂: 44 g/moleThen, by reaction stoichiometry, the following mass quantities of each compound participate in the reaction:
C₆H₁₂O₆: 1 mole ×180 g/mole= 180 gramsC₂H₅OH: 2 moles ×46 g/mole= 92 gramsCO₂: 2 moles ×44 g/mole= 88 gramsMass of C₂H₅OH formedThe following rule of three can be applied: if by reaction stoichiometry 180 grams of glucose form 92 grams of ethanol, 30 grams of glucose form how much mass of ethanol?
[tex]mass of ethanol=\frac{30 grams of glucosex 92 grams of ethanol}{180 grams of glucose}[/tex]
mass of ethanol= 15.33 grams
Then, 15.33 grams ethanol could be obtained from 30 grams of glucose.
Learn more about the reaction stoichiometry:
brainly.com/question/24741074
brainly.com/question/24653699
#SPJ1
Given that the initial rate constant is 0.0110s−1 at an initial temperature of 21 ∘C , what would the rate constant be at a temperature of 150. ∘C for the same reaction described in Part A?
Part A said: The activation energy of a certain reaction is 45.5 kJ/mol . At 21 ∘C , the rate constant is 0.0110s−1 . At what temperature in degrees Celsius would this reaction go twice as fast?
T2= 32 degrees
The rate of reaction at 150 degrees is 1.878.
What is the activation energy?We have the formula as;
ln(k2/k1) = Ea/R (1/T1 - 1/T2)
ln(2( 0.0110)/0.0110) = 45.5 * 10^3/8.314(1/294 - 1/T2)
0.693 = 5473(1/294 - 1/T2)
0.693/ 5473 = (1/294 - 1/T2)
1.27 * 10^-4 = 1/294
1/T2 = 1/294 - 1.27 * 10^-4
1/T2 = 340 * 10^-4 - 1.27 * 10^-4
T2 = 30 degrees
Again;
ln(k2/0.0110) = 45.5 * 10^3/8.314(1/303 - 1/423)
ln(k2/0.0110) = 5473(3.3 * 10^3 - 2.36 * 10^3)
ln(k2/0.0110) = 5.14
k2/0.0110 = e^5.14
k2 = 0.0110 * e^5.14
k2 = 1.878
The temperature that the reaction will go twice as fast is 30 degrees while the rate construction at 150 degrees is 1.878.
Learn more about Arrhenius equation:https://brainly.com/question/15051189
#SPJ1
Menthol, the substance we can smell in mentholated cough drops, is composed of C, H, and O. A 0.1005g sample of menthol is combusted, producing 0.2829g of CO2 and 0.1159g of H2O.
What is the empirical formula of menthol?
If the compound has a molar mass of 156 g/mol, what is its molecular formula?
The Empirical formula of compound is C₁₀H₂₀O₁. The Molecular Formula of compound is C₁₀H₂₀O₁.
What is Empirical Formula ?Empirical formula is the simplest whole number ratio of atoms present in given compound.
[tex]\text{Mass of C} = 0.2829\ g\ CO_2 \times \frac{12\ g\ C}{44\ g\ CO_2}[/tex]
= 0.07720 g C
[tex]\text{Mass of H} = 0.1159\ g\ H_2O \times \frac{2\ g\ H}{18\ g\ H_2O}[/tex]
= 0.01297 g H
Mass of O = Mass of methanol - mass of C - mass of O
= 0.1005 g - 0.07720 g - 0.01297 g
= 0.01033 g
Element Mass/g Moles Ratio Integers
C 0.07720 0.006428 9.956 10
H 0.01297 0.01287 19.93 20
O 0.01033 0.0006456 1 1
The Empirical formula of compound is C₁₀H₂₀O₁.
How to find the Molecular formula of compound ?Molecular formula = Empirical formula × n
[tex]n = \frac{\text{Molar Mass}}{\text{Empirical formula weight}}[/tex]
[tex]= \frac{156}{156}[/tex]
= 1
Molecular formula = n × Empirical formula
= 1 (C₁₀H₂₀O₁)
= C₁₀H₂₀O₁
Thus from the above conclusion we can say that The Empirical formula of compound is C₁₀H₂₀O₁. The Molecular Formula of compound is C₁₀H₂₀O₁.
Learn more about the Empirical Formula here: brainly.com/question/1603500
#SPJ1
During the procedure, several wases with cold methanol were done. why was it important to use cold methanol? (In nitration of methyl benzoate)
The use of cold methanol is important because it is used to recrystallize or solidify the product.
Since, ice bath is also used in nitration of methyl benzoate because in this reaction the concentrated acid like sulfuric acid is used with water and it is very exothermic.
The formation pure solid from the impure solid compound by mixing with hot solvent and form saturated solution. Now, this solution as cools and pure crystal grows when solubility of the compound decreases. This whole process is called re-crystallization.
learn about re-crystallization
https://brainly.com/question/14918321
#SPJ4
The concentration of hydroxide ion in an aqueous solution at 25°c is 3. 6 × 10⁻⁴ m. What is the concentration of the hydronium ion?.
Concentration of hydronium ion is 2.8 x 10⁻¹¹ M.
Calculation:
Given,
[OH⁻] = 3.6 x 10⁻⁴ M (concentration of hydroxide ion)
To find,
[H₃O⁺] =? (concentration of hydronium ion)
We know the relation that,
[H₃O⁺] x [OH⁻] = Kw
where,
Kw is the ionic constant of water at 25°C
Kw = 1 x 10⁻¹⁴
Substituting the known concentration of [OH-], we can find the concentration of [H3O+],
[H₃O⁺][3.6 x 10⁻⁴] = 1 x 10⁻¹⁴
[H₃O⁺] = 1 x 10⁻¹⁴/ 3.6 x 10⁻⁴
[H₃O⁺] = 2.8 x 10⁻¹¹ M
Therefore, the concentration of hydronium ion is 2.8 x 10⁻¹¹ M.
Learn more about ionic water constant numerical here:
https://brainly.com/question/9122027
#SPJ4
what is the molar mass of citric acid (c6h8o7) and baking soda (nahco3)?
The molar mass of citric acid (c6h8o7) is 192.124g/mol
The molar mass of baking soda (nahco3) is 84.007g/mol
The molar mass of a chemical compound is defined as the mass of a sample of that compound divided by the amount of substance in that sample and is measured in moles. Molar mass is a mass property, not a molecular property of a substance.
Molar mass is the mass of 1 mole of the sample. To find the molar mass, add up the atomic masses (atomic weights) of all the atoms in the molecule. Use the masses listed in the periodic table or atomic weight table to determine the atomic mass of each element.
Learn more about molar mass here:https://brainly.com/question/15476873
#SPJ1
The molar mass of citric acid (C6H8O7) : 192.12 g/mol
The molar mass of citric acid (C6H8O7) : 84.007 g/mol
Baking soda is a monosodium salt of carbonic acid with alkalizing and electrolyte substitution properties. When dissociated, baking soda forms sodium and bicarbonate ions. Ion formation increases plasma bicarbonate and buffers excess hydrogen ion concentration, resulting in an increase in blood pH.
Citric acid is a naturally occurring weak acid in all citrus fruits. If you've ever sunk your teeth in a lemon, you've tasted citric acid. Manufacturers add artificial versions of it to processed foods. Drugs containing citric acid treat health problems such as kidney stones.
Learn more about molar mass here: https://brainly.com/question/837939
#SPJ4
A student determines the mass of a 100 mL beaker filled with 50 mL of water to be 154.34 grams. After a tablet reacts with the water, the mass including the dissolved tablet is 157.26 grams. How much tablet was left in the beaker after the reaction
A student determines the mass of a 100 mL beaker filled with 50 mL of water to be 154.34 grams. After a tablet reacts with the water, the mass including the dissolved tablet is 157.26 grams. 438 grams tablet was left in the beaker after the reaction.
What is Stoichiometry ?Stoichiometry helps us use the balanced chemical equation to measure quantitative relationships and it is to calculate the amounts of products and reactants that are given in a reaction.
What is Balanced Chemical Equation ?The balanced chemical equation is the equation in which the number of atoms on the reactant side is equal to the number of atoms on the product side in an equation.
Now we have to write the balanced chemical equation
NaHCO₃ + H₂O → NaOH + H₂CO₃
Mass = 157.26 - 154.32
= 2.92
Volume = 100 + 50 ml
= 150 ml
Mass of tablet = 2.92 × 150
= 438 grams
Thus from the above conclusion we can say that A student determines the mass of a 100 mL beaker filled with 50 mL of water to be 154.34 grams. After a tablet reacts with the water, the mass including the dissolved tablet is 157.26 grams. 438 grams tablet was left in the beaker after the reaction.
Learn more about the Stoichiometry here: brainly.com/question/16060223
#SPJ4
1.For the first ten reactions, write a balanced reaction for each tube in which a reaction occurred. If there was no reaction, write NR
The equations of reaction occurring in the tubes are as follows:
2 MnO₄⁻ + 6 Br⁻ + 8 H⁺ → 2 MnO₂ + 3 Br₂ + 4 H₂O2 MnO₄⁻ + 6 I⁻ + 8 H⁺ → 2 MnO₂ + 3 I₂ + 4 H₂ONo reaction2 Fe³⁺ + 2 I⁻ → 2 Fe²⁺ + I₂What are the reactions occurring in the tubes?The reactions occurring in the tubes are redox reactions.
Based on the table the equations of reaction are as follows:
2 MnO₄⁻ + 6 Br⁻ + 8 H⁺ → 2 MnO₂ + 3 Br₂ + 4 H₂O2 MnO₄⁻ + 6 I⁻ + 8 H⁺ → 2 MnO₂ + 3 I₂ + 4 H₂ONo reaction2 Fe³⁺ + 2 I⁻ → 2 Fe²⁺ + I₂In conclusion, redox reaction are reactions in which electrons are transferred.
Learn more about redox reactions at: https://brainly.com/question/26750732
#SPJ1
A sample of an unknown substance has a mass of 0. 465 kg. If 3,000. 0 j of heat is required to heat the substance from 50. 0°c to 100. 0°c, what is the specific heat of the substance? use q equals m c subscript p delta t.
Answer:
.129 J / g-C
Explanation:
specific heat = J / g-°C
= 3000 J / ( 465 g * 50C ) =.129 J /g-C
An evil villain wants to broadcast a message to everyone on Earth. They are using satellites for the communication process. For them, money is not an option, only their ultimate goal of world domination. If they are able to place their satellites wherever they want, how many satellites do they need to broadcast their evil message to everyone on Earth?
If you are given 0.25 mol of Fe and 0.5 mol of O2, what is the limiting reactant?
The limiting reactant will be Fe.
What are limiting reactants?They are reactants that are available in limited quantities, as compared to other reactants, during the course of reactions.
From the equation of the reaction: [tex]4Fe + 3O_2 --- > 2Fe_2O_3[/tex]
The mole ratio of Fe to O2 is 4:3.
Thus, for 0.25 mol Fe, 0.25 x 3/4 = 0.1875 mol of O2 is required.
With 0.5 mol of O2 available, it means oxygen is in excess while Fe is limited in availability.
More on limiting reactants can be found here: https://brainly.com/question/14225536
#SPJ1
The limiting reactant from the calculations is Fe.
What is the limiting reactant?The limiting reactant is the reactant that is present in the least amount in solution. Now we have the equation as; 4Fe+ 3O2 → 2Fe2O3
If 4 moles of Fe reacts with 3 moles of O2
0.25 mol of Fe reacts with 0.25 mol * 3 moles/4 moles
= 0.1875 moles of O2
It then follows that the limiting reactant is Fe.
Learn More about limiting reactant:https://brainly.com/question/14225536
#SPJ1
A sample of gas has a temperature of 25 oc and a volume of 122 ml. if the volume is decreased to 50 ml, what is the new temperature?
Answer:
10.2 °C
Explanation:
If all other variables are held constant, you can find the new temperature using the Charles' Law equation. The equation looks like this:
V₁ / T₁ = V₂ / T₂
In this equation, "V₁" and "T₁" represent the initial volume and temperature. "V₂" and "T₂" represent the final volume and temperature. You can find the new temperature by plugging the given values into the equation and simplifying.
V₁ = 122 mL V₂ = 50 mL
T₁ = 25 °C T₂ = ? °C
V₁ / T₁ = V₂ / T₂ <----- Charles' Law equation
122 mL / 25 °C = 50 mL / T₂ <----- Insert values
4.88 = 50 mL / T₂ <----- Divide 25 from 122
4.88 x T₂ = 50 mL <----- Multiply both sides by T₂
T₂ = 10.2 °C <----- Divide both sides by 4.88
3H2 + blank, reaction arrow, 2NH3
How to complete the equation so that it is a Synthesis reaction
The complete equation representing the synthesis reaction for the formation of ammonia is: 3 H₂ + N₂ ⇒ 2 NH₃
What is a synthesis reaction?It is a reaction in which 2 or more substances combine to form 1 product.
Let's consider the following incomplete synthesis reaction.
3 H₂ + ____ ⇒ 2 NH₃
According to Lavoisier's law, the mass and the elements must be conserved in a chemical reaction. So, since there is nitrogen to the right, the missing element to the left must be nitrogen. Molecular nitrogen is diatomic.
The complete reaction is:
3 H₂ + N₂ ⇒ 2 NH₃
The complete equation representing the synthesis reaction for the formation of ammonia is: 3 H₂ + N₂ ⇒ 2 NH₃
Learn more about synthesis reaction here: https://brainly.com/question/16560802
#SPJ1
Which statement is true about word equations with regards to chemical reactions?
The total mass of the reactants equals the total mass of the products
If you remove two protons and two neutrons from a gold atom (au), what new element is formed (if any)?
Answer: Iridium
Explanation:
The atomic number of Iridium is 77.
The element we obtain if we remove two protons and two neutrons from the gold is iridium. The atomic number of gold is 79 and that of iridium is 77.
What is iridium?Iridium is the 77th element in the periodic table. It is a transition metal like gold, silver, platinum etc. Iridium is a d-block metal and have its valence electrons in d-orbital.
Gold is 79th element and it is also a transition metal. Gold is a precious metal used in making ornaments and its having high cost.
The atomic number of gold is 79 and it have 79 electrons and 79 protons. The atomic number of an element is the number of its protons and the mass number of the element is the sum of number of electrons and number of protons.
If we remove two protons from the 79 protons of gold the proton number becomes 77 and thus the atomic number. The elements with the atomic number 77 is iridium.
To find more about iridium, refer the link below:
https://brainly.com/question/20713777
#SPJ2
A 2 kg cat is stuck in a tree 10 m above the ground. How much GPE does it have?
A. 250 J
B. 150 J
C. 200 J
D. 20 J
Answer:
196J, but C. at 200 J comes close.
Explanation:
Potential energy due to gravity is given by:
PEgrav = mass • g • height
where g is the acceleration due to gravity. We'll use 9.8 N/kg (on Earth).
PEgrav = mass • g • height
PEgrav = (2 kg) • (9.8 N/kg) • (10 m)
PEgrav = 196 N*m
1 N*m = 1 Joule
PEgrav = 196 J
C. at 200 J comes close. The solution probably used a value of g equal to 10 N/kg)
Answer:
20 J
Explanation:
The presence of no subscript for an element in a chemical formula means that there is/are?
Answer:
only one atom of that element
Explanation:
Example:
H2 O has two hydrogenatoms and ONE Oxygen atom
The presence of no subscript for an element in a chemical formula means that there is a single atom of that element in the compound.
In a chemical formula, subscripts are used to indicate the number of atoms of each element present in a compound. When an element has no subscript, it means that there is only one atom of that element in the compound.
For example, in the chemical formula H₂O, the subscript 2 indicates that there are two hydrogen atoms present. On the other hand, the absence of a subscript for oxygen means that there is only one oxygen atom in the compound.
Thus, when there is no subscript for an element in a chemical formula, it signifies that there is a single atom of that element in the compound.
Learn more about chemical formula,here:
https://brainly.com/question/32228478
#SPJ7
If the prefix hydro were used to name a ternary acid, what problem would this create when naming chloric acid
Hydrochloric acid is a different kind of acid than chloric acid.
Ternary Acids (Oxy-acids) Ternary acids are also referred to as “Oxy-acids. Include hydrogen and oxygen and yet another (normally) nonmetallic detail. Those acids comprise each hydrogen and oxygen but their names make no reference to either hydrogen or oxygen.
A ternary acid is an acid that has the elements hydrogen and oxygen together with every other element, frequently a nonmetal. Or, they comprise hydrogen in addition to a polyatomic ion. An -ate complicated ion is named an -ic acid. as an example, HClO3(aq) consists of the chlorate ion and is known as chloric acid.
A binary acid is an acidic compound that always has hydrogen boned to every other chemical element, most of the time a nonmetal. Ternary acids are acidic compounds that comprise hydrogen and oxygen blended with some other detail. Binary acid has one style of a chemical element (hydrogen bonded to a nonmetal) .
Learn more about the ternary acid here https://brainly.com/question/13386259
#SPJ4
The partial pressure of oxygen in atmospheric air at sea level is Group of answer choices greater than the partial pressure of oxygen in atmospheric air at the top of Mt. Everest. less than the partial pressure of oxygen in atmospheric air at the top of Mt. Everest. equal to the partial pressure of oxygen in atmospheric air at the top of Mt. Everest.
A. The partial pressure of oxygen in atmospheric air at sea level is greater than the partial pressure of oxygen in atmospheric air at the top of Mt. Everest.
What is partial pressure?Partial pressure is the pressure exerted by a component of mixture of gases.
Partial pressure of oxygen in different location of the EarthThe depth (distance from top to bottom) of the atmosphere is greatest at sea level and decreases at higher altitudes.
With greater depth of the atmosphere, more air is pressing down from above.
Air pressure is greatest at sea level and falls with increasing altitude.
Thus, the partial pressure of oxygen in atmospheric air at sea level is greater than the partial pressure of oxygen in atmospheric air at the top of Mt. Everest.
Learn more about partial pressure here: https://brainly.com/question/19813237
#SPJ1
A technologist is creating a solution that contains 25.5 grams of NaOH that is dissolved in 1 L of laboratory grade water. What is the molarity of the solution that the technologist created
Answer:
0.638 M NaOH
Explanation:
To find the molarity of the solution, you need to (1) convert grams NaOH to moles NaOH (via the molar mass of NaOH) and then (2) calculate the molarity (via the molarity formula). It is important to arrange the conversions/ratios in a way that allows for the cancellation of units (the desired unit should be in the numerator).
(Step 1)
Molar Mass (NaOH): 22.990 g/mol + 15.998 g/mol + 1.008 g/mol
Molar Mass (NaOH): 39.996 g/mol
25.5 grams NaOH 1 mole
----------------------------- x ---------------------------- = 0.638 moles NaOH
39.996 grams
(Step 2)
Molarity = moles / volume (L)
Molarity = 0.638 moles / 1 L
Molarity = 0.638 M
10.Using the below valency chart, write chemical formula for aluminum oxide and
aluminum chloride
The chemical formula of aluminum chloride is AlCl₃ and the chemical formula of aluminum oxide is Al₂O₃.
Aluminum chloride
The chemical formula of aluminum chloride is written as;
Al³⁺ + Cl⁻ → AlCl₃
Aluminum oxideThe chemical formula of aluminum oxide is written as;
Al³⁺ + O²⁻ → Al₂O₃
Thus, the chemical formula of aluminum chloride is AlCl₃ and the chemical formula of aluminum oxide is Al₂O₃.
Learn more about chemical formula here: https://brainly.com/question/26388921
#SPJ1
A weather balloon calibrated at 0.00 °c to have a volume of 12.0 l has what volume at -22.8 °c assuming pressure is held constant?
Considering the Charles's law, the volume at 22.8 °C is 10.9978 L.
Charles's lawCharles's law establishes the relationship between the temperature and the volume of a gas when the pressure is constant.
Charles's law says that for a given sum of gas at constant pressure, as the temperature increases, the volume of the gas increases, and as the temperature decreases, the volume of the gas decreases. That is, the volume is directly proportional to the temperature of the gas.
Mathematically, Charles' law is a law that says that when the amount of gas and pressure remain constant, the ratio between volume and temperature will always have the same value:
[tex]\frac{V}{T} =k[/tex]
Considering an initial state 1 and a final state 2, it is fulfilled:
[tex]\frac{V1}{T1} =\frac{V2}{T2}[/tex]
Volume at -22.8 °CIn this case, you know that:
V1= 12 LT1= 0 °C= 273 KV2= ?T2= -22.8 °C= 250.2 KReplacing in Charles's law:
[tex]\frac{12 L}{273 K} =\frac{V2}{250.2 K}[/tex]
Solving:
V2= [tex]250.2 K x\frac{12 L}{273 K}[/tex]
V2= 10.9978 L
Finally, the volume at 22.8 °C is 10.9978 L.
Learn more about Charles's law:
https://brainly.com/question/4147359
#SPJ1
How are ionic compounds formed?
Answer:
Atoms gain/lose electrons and are held together by electrostatic forces.
What is the temperature of an 11. 2-l sample of carbon monoxide, co, at 744 torr if it occupies 13. 3 l at 55 °c and 744 torr?.
The temperature of an 11.2 L sample of carbon monoxide, CO, at 744 torr is 276 K or 3°C.
What is Charles's law?
Charles's law states that, "When the pressure on a sample of a dry gas is held constant, the Kelvin temperature and the volume will be in direct proportion".
V ∝ T
[tex]\frac{V}{T}=K[/tex]
Where,
V is the volume of the gas,
T is the temperature of the gas (measured in kelvins), and
K is a non-zero constant.
In two different states, an initial state 1 and a final state 2, the equation is,
[tex]\frac{V1}{T1}=\frac{V2}{T2}[/tex]
Given data:
V1 = 11.2L
V2 = 13.3L
T2 = 55°C = 328K
By substituting the given data,
[tex]\frac{11.2}{T1}=\frac{13.3L}{328K}[/tex]
[tex]T1=\frac{11.2L/328K}{13.3L}[/tex]
∴T1 = 276K = 3°C
To learn more about Charles law: brainly.com/question/14842720
#SPJ4
Approximately how long would the entire nucleosynthesis event take tofinish in the early universe?
Because of the very short period in which nucleosynthesis occurred before it was stopped by expansion and cooling (about 20 minutes), no elements heavier than beryllium (or possibly boron) could be formed.
Big Bang nucleosynthesis occurred inside the first three minutes of the start of the universe and is chargeable for an awful lot of the abundance of H (protium), H (D, deuterium), He (helium-three), and He (helium-4).
Although He remains produced by stellar fusion and alpha decays and hint quantities of H remain produced by way of spallation and certain sorts of radioactive decay, most of the mass of the isotopes inside the universe is thought to be produced in the Big Bang.
The nuclei of these elements, together with a few Li and Be are taken into consideration to have been fashioned between 100 and 300 seconds after the Big Bang whilst the primordial quark-gluon plasma froze out to form protons and neutrons.
Learn more about nucleosynthesis here: https://brainly.com/question/13517558
#SPJ4
A 4.40g piece of solid CO2 (dry ice) is allowed to sublime in a balloon. The final volume of the balloon is 1.00 L at 300 K. What is the pressure of the gas
Answer:
2.46 atm
Explanation:
We are going to use ideal gas law PV = n RT
find n mole weight of CO2 = 12.011 + 2 * 15.999 = ~ 44 gm/mole
SO 4.4 gm / 44 gm/mole = .1 mole (this is 'n' )
R = gas constant = .082057366 L-atm/k-mol
T must be in Kelvin = 300
PV = nRT
P * 1 = .1 * .082057366 * 300
P = 2.46 atm
Please help me!
List A
(a) Gas pressure
(b) One mole of substance
(c) One mole of any gas
(d) Avogadro's number
List B
(i) 6.02 × 1023
(ii) 22.4 dm³ at STP
(iii) force per unit area
(iv) 6.02 x 1023 particles
Answer:
(a) Gas pressure ---------------------> (iii) force per unit area
(b) One mole of substance -------------------> (i) 6.02 x 10²³
(c) One mole of any gas ----------------------> (ii) 22.4 dm³ at STP
(d) Avogadro's number -----------------> (iv) 6.02 x 10²³ particles
Which diagram is the correct electron dot diagram for magnesium?
A.
A symbol of magnesium M g has four dots representing four free electrons.
B.
A symbol of magnesium M g has three dots representing three free electrons.
C.
A symbol of magnesium M g has one dot representing one free electron.
D.
A symbol of magnesium M g has two dots representing two free electrons.
A symbol of magnesium, Mg, with two dots representing two free electrons. The correct option is D.
Electron dot diagramMagnesium is represented by Mg.
Magnesium has an atomic number of 12. Thus the electron configuration will be 2,8,2.
This means that there are two valence electrons in every Mg atom.
Therefore, the electron do diagram would be the symbol of the element with two dots representing the two valence electrons.
More on electron dot diagrams can be found here: https://brainly.com/question/2115636
#SPJ1
Answer:
Two dotted M
Explanation:
21. In infrared spectroscopy, absorption of electromagnetic radiation results in transitions between ________ energy levels.
In infrared spectroscopy, absorption of electromagnetic radiation results in transitions between Vibrational energy levels.
What does spectroscopy mean?Definition of spectroscopy Spectrum analysis is the study and measurement of the spectrum that matter emits when it interacts with electromagnetic (EM) radiation. It is the investigation of how frequency or wavelength affects the relationship between matter and radiation.
The various forms of spectroscopy include the following:
Acoustic resonance: A type of spectroscopy that primarily uses the ultrasonic and sonic ranges of sound. It is a popular, affordable approach for classifying and valuing materials.X-ray photoelectron: This technique makes use of the diffraction patterns that X-rays produce as they travel through crystalline materials. The nature of the crystal structure can be inferred from these patterns.You can use circular dichroism, a type of light absorption spectroscopy, to determine how differently a sample absorbs left- and right-circularly polarized light.It is appropriate for exploring the electronic structure of molecules and detecting the compounds present. Ultraviolet-Visible (UV/Vis) Spectroscopy. It aids in the recognition of peptide bonds, coenzymes, side chains of amino acids, and prosthetic groups.NMR Spectroscopy: This technique uses nuclear magnetic resonance to measure the magnetic fields surrounding the nuclei. Radio waves are used to excite atomic nuclei in a material. Spectroscopy of the infrared range of the electromagnetic spectrum is known as infrared spectroscopy. Longer wavelengths and lower frequencies are found in infrared photons, and in infrared spectroscopy, the idea of absorption spectroscopy is used.Raman spectroscopy is a method of spectroscopy used to examine low-frequency system modes such as rotational, vibrational, and other modes.Learn more about Spectroscopy here:-
https://brainly.com/question/27610069
#SPJ4