What does the universe look like on very large scales?

Answer: the first man does more work than the other

Explanation: because the second man has tool a trolley and a ramp to help him make his job easier

AU is the distance from the earth to the sun, and solar mass represents a measurement equal to the mass of our sun.

The units applied in astronomy is quite different from the units applied in daily life. The unit called astronomical units (AU) describes the distance from the earth to the sun. The unit solar mass represents the mass of the sun and is taken to be equal to 1.989 x 10^30 kilograms.

Therefore, the difference between the AU and solar mass is that; AU is the distance from the earth to the sun, and solar mass represents a measurement equal to the mass of our sun.

Learn more: https://brainly.com/question/8646601

a. The coefficient of static friction between the chair and the floor is 0.67.

b. The coefficient of kinetic friction between the chair and the floor is 0.52.

Given the following data:

Scientific data:

a. To find the coefficient of static friction between the chair and the floor:

Mathematically, the force of static friction is given by the formula;

[tex]F_s = uF_n = umg[/tex]

Where;

Making μ the subject of formula, we have:

[tex]u=\frac{F_s}{mg}[/tex]

Substituting the given parameters into the formula, we have;

[tex]u=\frac{165}{25 \times 9.8} \\\\u=\frac{165}{245}[/tex]

μ = 0.67

b. To find the coefficient of kinetic friction between the chair and the floor:

Note: The normal force would be the same as above.

[tex]u_k = \frac{F_k}{F_n} \\\\u_k = \frac{127}{245}\\\\u_k =0.52[/tex]

Read more on force of static friction here: https://brainly.com/question/25686958

Answer:

muscular force in relative to this

Answer:

B. 3 m

Explanation:

The position of the line at 3 seconds is 9 m and at 4 seconds is 12m .

Therefore; Displacement = 12 - 9 = 3 m

Answer:

7.1 m/s

Explanation:

Explanation is attached

Answer:

hot summer

Explanation:

it's common sense

Answer:

Hot summer

Explanation:

If the body is exposed to heat then it would decompose faster because the climate is more humid. Whereas if it was in the cold winter then it would decompose slower (not to mention that it could freeze causing it not to decompose at all).

Answer:

where in the world is the image????..

Answer:

we use : photometer to measure light intensity

:Anemometer to measure wind intensity

:Hygrometer to measure relative humidity

The magnetic field strength is needed to generate a peak voltage 0.15 T.

The given parameters;

The area of the coil is calculated as follows;

[tex]A = \pi r^2\\\\A = \pi \times 0.09^2\\\\A = 0.0255 \ m^2[/tex]

The maximum emf induced in the coil is calculated as follows;

[tex]E_{max} = NBA \omega \\\\B = \frac{E_{max}}{NA\omega } \\\\[/tex]

where;

[tex]B = \frac{170 }{120 \times 0.025 \times 2\pi \times 60 } \\\\B = 0.15 \ T[/tex]

Thus, the magnetic field strength is needed to generate a peak voltage 0.15 T.

"Your question is not complete, it seems to be missing the following information";

An electric generator has an 18-cm-diameter, 120-turn coil that rotates at 60 hz in a uniform magnetic field that is perpendicular to the rotation axis.

What magnetic field strength is needed to generate a peak voltage of 170 V?

Learn more here:https://brainly.com/question/17238887

Answer:

1.6675×10^-16N

Explanation:

The force of gravity that the space shuttle experiences is expressed as;

g = GM/r²

G is the gravitational constant

M is the mass = 1.0 x 10^5 kg

r is the altitude = 200km = 200,000m

Substitute into the formula

g = 6.67×10^-11 × 1.0×10^5/(2×10^5)²

g = 6.67×10^-6/4×10^10

g = 1.6675×10^{-6-10}

g = 1.6675×10^-16N

Hence the force of gravity experienced by the shuttle is 1.6675×10^-16N

Answer:

25mg

Explanation:

it basically explains itself

Answer:

No

Explanation:

Answer:

yes

Explanation:

Answer:

D. unsaturated fat

Explanation:

Unsaturated fats are considered the healthiest fats because they improve cholesterol, help reduce inflammation (a risk factor for heart disease), and help decrease the overall risk of developing heart disease. The main source of unsaturated fats are plant-based foods.

Answer:unsaturated fat

Explanation:

When light reflects from a surface, there is a change in its intensity. Thus, the correct option is C.

Light intensity is also known as luminous intensity. It is the amount of light which is falling on a surface over any given square foot or square meter in size. Light intensity can be measured in terms of lumens per square foot (foot candles) or lumens per square meter (lux).

Light intensity is affected by various factors such as surface on which the light rays strike, the medium, reflection, and the refraction of light.

When a ray of light reflects from a surface, there is a change in the intensity of light and also the speed of light in that medium.

Therefore, the correct option is C.

Learn more about Light intensity here:

https://brainly.com/question/9195922

#SPJ5

Your question is incomplete, most probably the complete question is:

When light reflects from a surface, there is a change in its:

a. frequency

b. velocity

c. intensity

d. phase

Speed= 60 m/s

for converting m/s to km/h =multiply with 5/18

for converting km/h to m/s= multiply with 18/5

so, 60 × ( 18/50) = 216 km/h

Answer:

5235.84 kg

Explanation:

There is one theorem - whose proof I will never remember without having to drag calculus in there - that says that the variation of momentum is equal to the force applied times the time the application last.

[tex]F\Delta t = m \Delta v[/tex] As long as the engine isn't ejecting mass - at this point it's a whole new can of worm - we know the force, we know the variation in speed, time to find the mass. But first, let's convert the variation of speed in meters per second. The ship gains 250 kmh, [tex]\Delta v = 69.4 m/s[/tex];

[tex]45 450 \cdot 8 = 69.4 m \rightarrow m = \frac{45450\cdot 8}{69.4} = 5235.84 kg[/tex]

Answer:

The correct answer is a.

Explanation:

it will not change it's motion because it's force is less than the force applied

Answer:  Nuclear energy is released from an atom through one of two processes: nuclear fusion or nuclear fission. In nuclear fusion, energy is released when the nuclei of atoms are combined or fused together. This is how the sun produces energy. In nuclear fission, energy is released when the nuclei of atoms are split apart.

Let me know if it helps!

The work done onto the car is 506,250 J

The work done on a system implies an increase in the internal energy of the system as a result of some forces acting on the system from the outside.

From the parameters given:

The work done onto the car refers to the change in the kinetic energy (i.e. ΔK.E)

[tex]\mathbf{=\dfrac{1}{2} mv_1^2 -\dfrac{1}{2} mv_2^2}[/tex]

[tex]\mathbf{=\dfrac{1}{2} m(v_1^2 - v_2^2)}[/tex]

[tex]\mathbf{=\dfrac{1}{2} \times 1500 \times (30^2 - 15^2)}[/tex]

= 506,250 J

Therefore, we can conclude that the work done on the car is 506,250 J

Learn more about work done here:

https://brainly.com/question/18762601

how both affect the ozone layer and affect temperature in a grobal way

Differences between earthquakes at continental plate boundaries and earthquakes at mid-ocean ridges discussed in the answer.

When plates travel in the same direction and collide, this happens. The thinner, denser, and more flexible oceanic plate dips beneath the thicker, more rigid continental plate when a continental plate meets an oceanic plate. It's known as subduction.

Deep ocean trenches, like the one that runs down South America's west coast, are created by subduction. The continent's undercut rocks start to melt. On occasion, a chain of volcanoes forms as the molten rock rises to the surface and passes through the continent. Nearly 80% of earthquakes happen along convergent borders, when plates are being forced together.

Shallow earthquakes, often less than 30 km deep, occur in small bands adjacent to plate borders along mid-ocean ridges and transform edges. There are earthquakes in subduction zones at various depths, some of which are more than 700 km deep. Because they occur everywhere throughout the subducting slab that stretches beneath the opposing plate, earthquake bands are wider along subduction zones. Wide areas of distributed earthquakes may be associated with collision zones between continents, such as those between the Eurasian plate and the plates to the south of the African, Arabian, and Indian tectonic arcs.

Learn more about earthquakes here:

https://brainly.com/question/29500066

#SPJ2

Answer:

*Disclaimer you can't actually do that, or at least not yet because the nearest black hole is at least 1,000 light years away. But if we could...

His journy would be pretty fast and horrific. For him, he would slowly be streched apart or spegetified into a string of atoms as he nears the event horizoin. But for an outside observer he would apear to go slower and slower and would never actualy reach the event horizion. This is becuase of einstines general relativity, massive objects slow time down. He would also apear to become red as the lights wavelength is streched out due to the entense gravity of the black hole.

Answer:

60 Ns

Explanation:

change in momentum = Fxt

6*10

60 Ns

A force of 6.0 N acts on a 4.0 Kg object for 10.0 s. The object's change in momentum is 60 kg-m/sec.

A force is an effect that can alter an object's motion according to physics. An object with mass can change its velocity, or accelerate, as a result of a force. An obvious way to describe force is as a push or a pull. A force is a vector quantity since it has both magnitude and direction.

change in momentum = force . time

change in momentum = 6 . 10 = 60

A force of 6.0 N acts on a 4.0 Kg object for 10.0 s. The object's change in momentum is 60 kg-m/sec.

To learn more about force refer to the link:

brainly.com/question/13191643

#SPJ5

Answer:

Explanation:

The work done by an object can be found by using the formula

workdone = force × distance

To find the force applied we make force the subject in the formula above

That's

[tex]f = \frac{w}{d} \\ [/tex]

w is the workdone

d is the distance

From the question we have

[tex]f = \frac{1800000}{400} = \frac{18000}{4} = 4500\\ [/tex]

We have the final answer as

Hope this helps you

[tex]▪▪▪▪▪▪▪▪▪▪▪▪▪  {\huge\mathfrak{Answer}}▪▪▪▪▪▪▪▪▪▪▪▪▪▪[/tex]

1. According to person standing on ground ~

2. According to The car ~

3. According to the Seat ~

4. According to another person on ride ~

5. According to the track ~

6. According to the Sun ~

I hope that's what you were looking for, goodluck for your assignment ~

Answer:

Δx=7.35m

Explanation:

This is a free fall problem (g= -9.8 m/s²).

Displacement: ? <--- what you're trying to find (max height)

Initial Velocity: 12 m/s

Final Velocity: 0 m/s <-- since the can will land back in your hands

Time: Missing <-- not needed to solve

Acceleration: -9.8 m/s²

The equation that you will use is vf²=vi²+2aΔx

Now plug the information into the equation!

(0m/s)²=(12m/s)²+2(-9.8m/s²)Δx

Multiply the 2 with the acceleration (-9.8m/s²)

(0m/s)²=(12m/s)²-19.6m/s²Δx

Now you need to square the final and initial velocity

0m/s=144m/s-19.6m/s²Δx

Move 144 to the other side of the equal sign

-144m/s=-19.6m/s²Δx

Divide both sides by -19.6m/s²

7.346m=Δx

You can round it to the tenth or hundreth place, up to you!

For this example, I'll round to the hundredth...

Δx=7.35m

I would double check this answer or review it yourself to see if it's correct.

Good luck with your studies!

Answer:

15N

Explanation:

mass=w/g 150N/m×0.1m

Ans=15N

Answer:

Both springs have a constant of 25Nm and the block is motionless. If the bottom spring is compressed 0.4m past its equilibrium and the block has a mass of 3kg, how far is the top spring stretched past its equilibrium?

g=10ms2

Possible Answers:

1.0m

0.8m

0.2m

0.4m

0.6m

Correct answer:

0.8m

Explanation:

Since the block is motionless, we know that our forces will cancel out:

Fnet=0

There are three forces in play: one from each spring, as well as the force of gravity. If we assume that forces pointing up are positive, we can write:

Fspring,top+Fspring,bot−mg=0

Plugging in expressions for each spring force, we get:

kxtop+kxbot−mg=0

Rearring for the displacement of the top spring, we get:

xtop=mg−kxbotk=(3kg)(10ms2)−(25Nm)(0.4m)25Nm

xtop=30N−10N25Nm=0.8m