What cell controls what can go into or out of the cell

The names of elements in the periodic table do not have Latin versions as they are based on either the elements' natural occurrence, mythology, or scientists who discovered them.

However, some of the element names have roots in Latin and ancient Greek languages. Here are some examples:

These are just a few examples, and the origins of the element names vary.

Learn more about periodic table here:

https://brainly.com/question/11155928

#SPJ4

Answer: A

Explanation:  Electronegativities are used to determine the polarity of covalent bonds.

To the volume of 1.76 L, you should dilute 126 ml of a 7.15 m cucl2 solution so that 50. 5 ml of the diluted solution contains 4. 33 g cucl2.

To find the final volume, we should know the concentration of the final solution. This can calculate from the amount of CuCl2 present in 50.5 ml of the diluted solution.

First of all, convert the mass of CuCl2 into moles:

4.33 g CuCl2 / (114.45 g/mol) = 0.038 mol

Now calculate the concentration of the final solution in moles per liter:

0.038 mol / (50.5 ml / 1000 ml/L) = 0.00075 mol/L

Finally, dilute the original solution to the final concentration by multiplying the original volume by the dilution factor:

126 ml * (0.00075 mol/L) / (7.15 mol/L) = 1.76 L

So the final concentration is 1.76 L.

To learn more about dilution factor:

https://brainly.com/question/24881505

#SPJ4

Determine the basis's mass (1 litre of solution) Mass = d V; d = mass / V mass = 1,000 ml/litre x 1,000 g/liter x 1 litre = 1006 g

Acetic acid makes up 3.26% of vinegar. Step 1: Information is provided Sample weight: 5.54 grammes. NaOH volume: 30.10 m. NaOH has a molarity of 0.100M. Step 2: The equation with a balance. NaOH + CH3COOH = CH3COONa + H2O. Step 3: Determine the moles of NaOH/. Volume * Molarity = Moles of NaOH. NaOH moles = 0.03010 L * 0.100M. Moles of NaOH equal 0.00301 moles of NaOH. Step 4: Determine the moles of CH3COOH. For 1 mol NaOH, 1 mol CH3COOH is required. For 0.00301 moles of NaOH, 0.00301 moles of CH3COOH are required. Step 5: Determine the mass CH3COOH. Mass CH3COOH is equal to the sum of its moles and molar masses. The mass of CH3COOH is 0.00301 moles times 60.05 g/mol.m CH3COOH mass equals 0.1808 grammes. Calculate the acetic acid percentage by weight. Mass % = (0.1808 / 5.54 ) *100% Mass % = 3.26 %.

Learn more about Acetic acid here:

https://brainly.com/question/15089082

#SPJ4

The amount of solid Ca3(PO4)2 that can be formed from 290 g of calcium nitrate and 129 g of phosphoric acid would be 183 grams.

Calcium nitrate and phosphoric acid react to form calcium phosphate and hydrogen nitrate according to the following equation:

[tex]3Ca(NO_3)_2 + 2H_3PO_4 --- > Ca_3(PO_4)_2 + 6HNO_3[/tex]

Mole of 290 g calcium nitrate = 290/164.088 = 1.77 mol

Mole of 129 g phosphoric acid = 129/97.994 = 1.32 mol

In other words, calcium nitrate is limiting.

Equivalent mole of Ca3(PO4)2 that will be formed = 1.77/3 = 0.59 mol

Mass of 0.59 mole Ca3(PO4)2 = 0.59 x 310.18 = 183 grams

In other words, the mass of solid Ca3(PO4)2 that can be formed is 183 grams.

More on stoichiometric problems can be found here: https://brainly.com/question/14465605

#SPJ1

Answer:

14

Explanation:

the addition of the number of protons and neutrons gives the answer

Seven protons make up the nucleus of nitrogen, which has an atomic number of 7. Since it has a mass number of 14, and we know that it has seven protons.

Furthermore, given that nitrogen has an atomic number of 7, we can infer that it contains seven protons. As a result, the Na atom's atomic number, which is 11, is the same as the sum of its protons and electrons.

The number of protons in an atom's nucleus or the number of electrons in an electrically charged atom is its atomic number unbiased atom An atom of sodium, for instance, has 11 protons and 11 electrons.

To know more about atomic number visit:-

https://brainly.com/question/16858932

#SPJ4

To prepare a buffer solution with a pH of 5.59 (with a pKa of 4.54), we need to add 0.134 mL of 0.1 M NaOH to 24.0 mL of 0.1 M HB.

The pH of a buffer answer is without delay associated with its pKa value. The pKa of a buffer answer is the pH at which the ratio of the conjugate base (B-) to its corresponding acid (HB) is equal to one. At this point, the buffer is handiest at resisting adjustments in pH when small amounts of acid or base are introduced. The closer the pH of the buffer solution is to its pKa value, the extra effective the buffer might be at resisting adjustments in pH. Because of this if the pH of the buffer solution is equal to its pKa, the buffer will be at its maximum buffering potential.

To know more about pKa visit: https://brainly.com/question/13178964

#SPJ4

These statements contradict each other, hence C is true if and only if one of the three statements is true

Think about the following: C=(p∧q∧¬r)∨(p∧¬q∧r)∨(¬p∧q∧r)

The outer disjunction () is used in this compound statement C, and it states that it is true if and only if one of the three propositions (p∧q∧¬r)∨(p∧¬q∧r)∨(¬p∧q∧r) is true.

First, it is not conceivable for two or three of these statements to be true at the same time. For instance, if  (p∧q∧¬r) and (p∧¬q∧r)are both true, then (r, from the first conjuncture) and (r, from the second conjuncture), respectively, are true, which is a contradiction. The same logic can be used to rule out any other possibility.

To learn more about Contradiction :

https://brainly.com/question/17439687

#SPJ4

The process of purifying seawater by removing most of its dissolved substances is called desalination.

This process involves removing salt, minerals, and other impurities from seawater, making it suitable for drinking and irrigation.

Desalination is an important technology in arid regions where water is scarce and has become increasingly important globally as the demand for freshwater continues to rise.

There are several methods for desalinating seawater, including reverse osmosis, thermal distillation, and electrodialysis. Each method works by using different physical or chemical processes to separate the salt and other impurities from the water.

The choice of method depends on factors such as the location, the volume of water needed, and the cost of the technology. Regardless of the method used, the goal is to produce water that is safe and suitable for human consumption and other uses.

Therefore, The process of purifying seawater by removing most of its dissolved substances is called desalination.

To know more about desalination refer to:

brainly.com/question/12666368

#SPJ4

Taking into account the definition of calorimetry, the energy released when 240 g of iron is cooled by 65 °C is 7051.2 J.

Calorimetry is the measurement and calculation of the amounts of heat exchanged by a body or a system.

When heat added or removed from a substance causes a temperature change in it without affecting its molecular structure, it is called sensible heat.

The expression that allows to calculate heat exchanges is:

Q = c× m× ΔT

where:

In this case, you know:

Replacing in the definition of calorimetry:

Q = 0.452 J/g°C× 240 g× 65°C

Solving;

Q= 7051.2 J

Finally, the energy is 7051.2 J.

Learn more about calorimetry:

brainly.com/question/12670283

#SPJ1

Since hydrogen & carbon have comparable levels of electronegativity, the C—H connection is not typically regarded as a covalent polar bond.

A nonpolar covalent bond is formed by a carbon and a hydrogen atom.The shared electrons that result from the formation of covalent bonds between two atoms may be evenly distributed between both or may be drawn more strongly toward one element than the other.

As in the covalent connections that create methane, CH4, hydrogen and carbon atoms share electrons.When hydrogen and carbon atoms join to make ethane, C2H6, the laws of power combination are still followed.

To know more about electronegativity visit:

https://brainly.com/question/17762711

#SPJ4

The bond resolution includes all covenants between the issuer and the trustee acting for the bondholders (Option D).

A bond resolution is a document that outlines the terms and conditions of a bond issue, including the rights and obligations of the issuer and the bondholders. The bond resolution is typically prepared by the issuer and reviewed by bond counsel.

Covenants between the bond counsel and the bondholders (Option A) may not be included in the bond resolution, but they could be outlined in a separate agreement or memorandum between the bond counsel and the bondholders.

The issuer and the Municipal Securities Rulemaking Board (MSRB, Option C) may not have any direct covenants as the MSRB is a self-regulatory organization for the municipal securities market and does not have a direct role in individual bond issues.

The relationship between the issuer and the bond counsel (Option B) is usually a professional one, where the bond counsel provides legal advice and representation to the issuer in connection with the bond issuance. This relationship is not typically covered in the bond resolution.

Learn more about bond resolution here:

https://brainly.com/question/14554833

#SPJ4

Yes , it is a hydrobromic acid .

What are acids ?

Acids are acid-tasting compounds that react with certain metals to produce hydrogen gas. They can be recognized by their ability to release hydrogen ions (H+) in solution. This increases the concentration of H+ ions and lowers the pH, making the solution more acidic. Strong acids have a high concentration of H+ ions, weak acids have a low concentration. Common examples of acids are hydrochloric acid, sulfuric acid, and acetic acid. Acids play an important role in various fields such as chemistry, biology and industry, and have a wide range of applications in cleaning and food manufacturing.

To know more about acids , click the link below ;

https://brainly.com/question/25148363

#SPJ4

The rate law demonstrates that as the concentration of H₂ rises, so does the rate of the reaction.

This is due to the fact that the number of effective collisions between H₂ and I₂ in order to produce HI also increases as the number of H₂ molecules increases.

b) As the vessel's volume increases, reactant molecules are able to move farther apart from one another, which results in a decrease in the number of effective collisions in a given time period. As a result, the rate of the reaction slows down.

c) The addition of a catalyst to the reaction mixture speeds up the reaction. This is due to the fact that, when a catalyst is present, the reactant molecules choose a reaction pathway with a lower activation energy. Since the pathway has a lower activation energy, the number of collisions that are effective enough to form a product increases over time. The presented plot of energy against reaction coordinate demonstrates this.

d) The number of reactant molecules with higher energy than activation energy rises with system temperature. As a result, the rate of reaction increases as well as the number of successful collisions.

For basic reactions, molecular dynamics simulations can be used to determine the rate constant. Calculating the molecule's mean residence time in the reactant state is one option.

This method can be used in small systems with short residence times, but it is not widely used because reactions are typically rare at the molecular scale.

Learn more about rate constant:

brainly.com/question/24749252

#SPJ4

Where r is the radius of the cardioid and θ is the angle. Since the equation is in terms of the angle, it is not possible to calculate the area of the region enclosed by one loop of the curve.

An equation is a mathematical statement that uses an equal sign to show that two expressions have the same value. An equation typically consists of two parts, separated by an equal sign. The two parts of the equation can be numbers, variables, or mathematical operations such as addition, subtraction, multiplication, and division. The equation can be used to solve unknown values, such as the value of a variable in a given expression. Equations are an important part of mathematics and are used to model real-world problems and to describe the relationships between different quantities.

To learn more about equation

https://brainly.com/question/28818351

#SPJ4

A wire acts like a magnet when there is an electric current flowing through it. An electromagnet is a coil of insulated wire that carries current and is wound around a piece of iron. Additionally, magnetic material is separated from trash using electromagnets.

The current runs through the coil, which transforms into an electromagnet, when the iron strip comes into contact with the screw.

The iron strip is then pulled by it. In the procedure, a sound is created when the bell's gong is struck by the hammer at the end of the strip.

Therefore, A magnetic field is mostly reliant on current and less so on gauge, and some heating, more or less, depends on the gauge of the wire and the quantity of current.

Learn more about current flow here:

https://brainly.com/question/2264542

#SPJ4

The answers include the following below:

This is referred to as a collection of materials, books or media that are accessible for use such as reading etc.

Maintaining books is very important because if it stolen or damaged, it won't function as there will be nothing to read by the users.

Read more about Library here https://brainly.com/question/1348481

#SPJ1

In a nitrogen molecule (N2), both nitrogen atoms have an equal distribution of electrons, so neither of them is particularly closer to the negative side.

In a nitrogen molecule (N2), the two nitrogen atoms are arranged in a linear configuration, with a bond angle of 180 degrees. The nitrogen atoms are covalently bonded to each other through a triple bond, which is composed of one sigma bond and two pi bonds. This arrangement results in a symmetrical distribution of electrons around the central nitrogen atom, so neither of the nitrogen atoms can be considered negative or positive.

To know more about electrons, visit:

https://brainly.com/question/12001116

#SPJ4

When the 13.99 mL of the HCl of unknown concentration are with the 13 mL of the 2.14 M NaOH, The molarity of HCl is 1.98 M

The balance reaction is as follows :

NaOH + HCl -->  NaCl  +  H₂O

The concentration, M1 = ?

The volume V1 = 13.99 mL

The concentration , M2 = 2.14 M

The volume , V2 = 13 mL

The expression is given as :

M1 V1 = M2 V2

M1 = M2 V2 / V1

M1 = ( 2.14 × 13 ) / 13.99

M1 = 1.98 M

Thus, the molarity of the HCl is 1.98 M.

To learn more about concentration here

https://brainly.com/question/26403608

#SPJ4

The final pH of the solution formed by mixing 123 ml of 0.300 M HNO3 (nitric acid) and 321 ml of 0.100 M KOH (potassium hydroxide) can be calculated using the concept of neutralization reactions.

In a neutralization reaction, an acid reacts with a base to form a salt and water. The reaction between nitric acid and potassium hydroxide can be written as follows:

The number of moles of HNO3 and KOH can be calculated as follows:

n_HNO3 = (0.123 L) * (0.300 mol/L) = 0.0369 mol

n_KOH = (0.321 L) * (0.100 mol/L) = 0.0321 mol

Since the reaction is a neutralization reaction, the number of moles of HNO3 and KOH should be equal. If the number of moles of HNO3 is greater than the number of moles of KOH, the solution will be acidic, and if the number of moles of KOH is greater than the number of moles of HNO3, the solution will be basic. In this case, the number of moles of HNO3 is greater than the number of moles of KOH, so the solution will be acidic.

The pH of the solution can be estimated using the Henderson-Hasselbalch equation:

pH = pKa + log([A^-]/[HA])

where pKa is the dissociation constant of the acid, [A^-] is the concentration of the conjugate base, and [HA] is the concentration of the acid. For nitric acid, the dissociation constant is about 7, so the pH of the solution can be estimated as follows:

pH = 7 + log([NO3^-]/[HNO3])

To find the exact pH, you would need to use a more sophisticated method, such as a chemical equilibrium simulation or a pH meter.

learn more about ph at:

brainly.com/question/491373

#SPJ4

C. H2O + H3PO4 = H2PO4- + H3O+

The second equilibrium, H2PO42- + H2O = H3PO4 + OH-, is the one that matters the most for figuring out the pH of a sodium phosphate solution.

It is the amount of hydrogen ions (H+) in a solution that determines its pH. Reaction C, H3PO4 + H2O = H2PO4- + H3O+, is the equilibrium reaction in a sodium phosphate solution that has the biggest impact on the concentration of H+ ions. In this reaction, phosphoric acid (H3PO4) is broken down into its conjugate base, H2PO4-, and the hydronium ion, H3O+.

The ratio of H3PO4 to H3O+ in the solution, which is impacted by pH, determines the amount to which this reaction takes place. The concentration of H+ ions and H2PO4- increases as the concentration of H3PO4 in the solution increases because more of it will dissociate into H3O+ and H2PO4-.

Learn more about hydrogen here:

https://brainly.com/question/28937951

#SPJ4

There are numerous methods for determining if the water collected in the receiving flask during the experiment is salt-free or not like taste test, conductivity test and chemical analysis.

To establish this, the experimenter may utilise one or a combination of the approaches listed below:

For more such questions experiment.

https://brainly.com/question/11256472#

#SPJ11

The amount of product that can result from the reaction of two moles of reactant B with an excess of reactant A is determined by the reaction's stoichiometry and the limiting reactant.

A substance used in a chemical reaction known as a reactant is ingested during the reaction and eventually becomes a component of the end result (s). A chemical reaction begins with reactants, which are then converted into the desired end products. The quantity of reactant used in a reaction can affect the volume of product that is produced, and in some circumstances, using too much reactant can guarantee complete consumption of the other reactant. The target product's yield and reaction rate can both be impacted by the identity, purity, and quantity of each reactant. To guarantee that the reaction goes smoothly and that the desired product is obtained, the reactants must be carefully chosen and handled. Occasionally, the reactants may need.

Learn more about reactant here:

https://brainly.com/question/17096236

#SPJ4

The time it takes for the partial pressure of cyclopropane to decrease from 1.0 atmosphere to 0.125 atmosphere at 500°C can be estimated using the half-life of the isomerization reaction.

The half-life of a first-order reaction is defined as the time it takes for the concentration of the reactant to decrease by half. In this case, the half-life of the isomerization of cyclopropane to propylene is 19 minutes at 500°C. To find the time it takes for the partial pressure to decrease from 1.0 atmosphere to 0.125 atmosphere, we can use the relationship between concentration and time in a first-order reaction. The time can be calculated as the half-life multiplied by the logarithmic ratio of the initial concentration to the final concentration. This calculation would give an estimate of the time required for the partial pressure of cyclopropane to decrease from 1.0 atmosphere to 0.125 atmosphere.

Learn more about cyclopropane:

brainly.com/question/18521496

#SPJ4

The compounds in their order of increasing positive character of carbon are: CH₃Li → CH₃F → CH₄ → CH₃NH₂ → CH₃OH.

The positive character of the carbon atom refers to its electropositive nature or its ability to attract electrons towards itself in a chemical bond. This property of the carbon atom can be influenced by the other atoms or groups bonded to it, as well as their electronegativity, size, and electronic configuration.

The positive character of the carbon atom can be determined by various methods, including chemical reactions, spectroscopic measurements, and theoretical calculations.

Find out more on positive carbon character here: https://brainly.com/question/5053007

#SPJ1

The only electrons flow in the current because the electrons move freely in the structure of the atom.  This is the reason electric current generates by the flow of the electrons.

The free electrons generates the electric current. The free electrons are the valence shell electrons having the weaker force of attraction to the nucleus. This is the reason that they are free to move and they generates the electric current.

The current flows in the direction of the positive to the negative terminal. The electrons are the negative charge species. Therefore, The electrons are attracted to the positive end.

To learn more about electrons here

https://brainly.com/question/30033550

#SPJ4

The moles and the grams of carbon are present in 11.85 g of aspirin C₉H₈O₄ is 0.585 mol.

The chemical formula for the compound = C₉H₈O₄

The mass of the aspirin = 11.85 g

The moles of the aspirin = mass / molar mass

The moles of the aspirin = 11.85 / 180

The moles of the aspirin = 0.065 mol

The moles of the carbon in  aspirin,  C₉H₈O₄ = 9 × 0.065

The moles of the carbon in  aspirin, C₉H₈O₄ = 0.585 mol

Thus, the moles of the carbon atom  is 0.085 in the aspirin that is C₉H₈O₄ compound .

To learn more about moles here

https://brainly.com/question/1895167

#SPJ4

The reaction of 24 g of CH₄ (methane) with 96 g of O₂ will form 66 g of CO₂ and 132 g of H₂O.

A chemical reaction is a process that causes one group of chemical components to change chemically into another.

In this reaction, one molecule of CH₄ reacts with two molecules of O₂ to form one molecule of CO₂ and two molecules of H₂O. The balanced chemical equation for this reaction is:

CH₄ + 2O₂ -> CO₂ + 2H₂O

Since 24 g of CH₄ reacts with 96 g of O₂, the number of moles of CH₄ and O₂ can be calculated.

\

The number of moles of CO₂ and H₂O can also be calculated using the balanced equation and the number of moles of CH₄ and O₂.

The number of grams of CO₂ and H₂O can then be calculated using the moles and the molar mass of each substance.

In this case, the number of grams of CO₂ formed is 66 g, and the number of moles of CO₂ is 66 g / (44.01 g/mol) = 1.5 moles.

Since two moles of H₂O are produced per mole of CO₂, the number of moles of H₂O is 2 x 1.5 = 3 moles.

The number of grams of H₂O can be calculated as 3 moles x (18.015 g/mol) = 54.045 g. So, the total amount of H₂O formed is 54.045 g.

Read more about chemical reactions here:

https://brainly.com/question/11231920

#SPJ1

The mole ratio of Al to O2 is 4:3

The reaction is 4Al(s) + 3O2(g) -> 2Al2O3(s)

Four molecules of O2 are used in the reaction.

Twelve oxygen atoms are required in the reaction.

2 moles of Al2O3 are formed in the reaction.

The mole ratio of Al to O2 is 4:3, meaning that 4 moles of Al react with 3 moles of O2 to form 2 moles of Al2O3.

It is important to note that these ratios refer to the stoichiometry of the reaction, which is a measure of the relative amounts of reactants and products involved in a chemical reaction. The stoichiometry of a reaction is a fundamental concept in chemistry and is used to predict the amount of products that will be produced from a given amount of reactants, as well as to understand the underlying mechanisms of chemical reactions.

Learn more about mole:

brainly.com/question/26416088

#SPJ4

Compound A is Alcohol, Compound B is Carboxylic Acid, Compound C is Amine.

A functional group is a specific molecular grouping of atoms that is responsible for the characteristic chemical reactions of a molecule. These groups can consist of a few atoms or several atoms joined together, and they dictate the reactivity and physical properties of the molecule. The most common functional groups in organic chemistry include alcohols, carbonyls, carboxylic acids, amines, and alkanes.

Functional groups play a critical role in determining the properties and reactivity of organic molecules. For example, alcohols have a hydroxyl (-OH) functional group that makes them polar and reactive with other polar substances. On the other hand, alkanes have a nonpolar hydrocarbon (-C-C-) functional group that makes them nonpolar and unreactive.

In chemistry, an alcohol is a type of organic compound that contains a hydroxyl (-OH) functional group. Alcohols are characterized by the presence of this functional group, which gives the molecule its characteristic polar and reactive properties.

A carboxylic acid is a type of organic acid that contains a carboxyl (-COOH) group, which is a functional group composed of a carbon atom double-bonded to an oxygen atom and single-bonded to a hydroxyl (-OH) group. Carboxylic acids are widely found in nature and have a sour taste. Examples include acetic acid (found in vinegar), citric acid (found in citrus fruits), and formic acid (found in ant bites).

Amines are a type of organic compound that contain nitrogen as a central atom and are derived from ammonia (NH3) by replacing one, two, or all three of the hydrogens with organic groups (alkyl or aryl groups). Depending on the number of hydrogen atoms replaced, amines can be classified as primary (one hydrogen replaced), secondary (two hydrogens replaced), or tertiary (all three hydrogens replaced). Amines are commonly used as intermediates in the synthesis of pharmaceuticals, agrochemicals, and dyes. They also have a range of biological activities, including serving as neurotransmitters in the human body.

To know more about compound visit:

https://brainly.com/question/14782984

#SPJ1