what can you conclude about the inflated balloon? is the balloon going to rise, fall or stay stationary?

The spinning cylinder is called a vertical mesocyclone, when it is tipped up. Hence,  option B is correct.

A mesocyclone is a meso-gamma mesoscale zone of rotation (vortex) that normally has a diameter between 2 and 6 mi (3.2 and 9.7 km) and is most frequently seen on radar during thunderstorms.

The most powerful and hazardous thunderstorms, known as supercells, include mesocyclones. Compared to "spin-up tornadoes," which occur in some events, supercells remain a lot longer.

Hail is produced by supercells 100% of the time, while tornadoes occur around 30% of the time. These storms are thunderstorms that rotate.

Often, before a tornado touches down, a hail core and heavy rain pass by as a forerunner and warning. Here, the tipped up spinning cylinder forms a mesocyclone.

Find ore on mesocyclones:

https://brainly.com/question/14438254

#SPJ1

Finding the ration of the electric force to gravitational force ( -) between a proton and an electron separated by an arbitrary distance d.

Taking the masses of proton and electron respectively as:

mp= 1.67× 10⁻²⁷ kg

me= 9.11 × 10⁻³¹kg

Fe=1/4π∈o×e²/d²

Fg= G×mp×me/d²

, the ratio of the two forces is calculated as:

Fe/Fg= (1/4π∈o×e²/d²) / (G×mp×me/d²)

Fe/Fg= (1/4π∈o×e²) / (G×mp×me)

=9x10^9 ×(1.6 x 10^-19 C)²

=6.67 X 10⁻¹¹×1.67×10⁻²⁷kg x 9.11 x 10⁻³¹

≈ 2.27 × 10³⁹

The electric force is the force experienced by a charged object that is in an electric field. The formulation of the electric force is sometimes confused with Coulomb's law, even though the electric force is more general in nature than this law, which only works for two point charges.

Electric force, as is generally the case, is denoted by the letter F or usually given a small index under E  (electric) or L (electricity).

F=qE

with:

q : is the payload of the object

E: is the electric field

Learn more about electric force at https://brainly.com/question/20935307.

#SPJ4

The approximate speed of the motor is 1800 RPM.

To determine the approximate speed of the motor, we can use the formula:

Speed (in RPM) = (120 x Frequency) / Number of Poles

The speed of the motor is calculated by the ratio of the product of 120 and frequency by the number of poles. the speed is measured in rotation per minute.

Given information:

Frequency (f) = 60 Hz

Number of Poles (p) = 4

Using the formula, the speed will be calculated as:

Speed = (120 x 60) / 4

Speed = 1800 RPM

Therefore, the approximate speed of the motor is 1800 RPM.

To know more about speed follow

https://brainly.com/question/14289507

#SPJ6

We may determine that 43°F is equivalent to 6°C using the formula.

The global standard for measuring temperature is Celsius, sometimes known as centigrade. Anders Celsius, a Swedish astronomer, first used it in 1742. The freezing point of water is 0° on the Celsius scale, and the boiling point of water at standard atmospheric pressure is 100°. The most common temperature scale in use worldwide, it is utilised for scientific purposes.

The formula used is,

C = (F - 32) * 5/9

Where F and C are the Fahrenheit and Celsius temperatures, respectively.

The difference between the zero points and increments on the Fahrenheit and Celsius scales means that a temperature reading on one scale will not have an exact equal on the other. While the Celsius scale is widely used and is thought to be the norm for most scientific purposes, the Fahrenheit scale is mostly used in the United States.

To know more about Celcius, visit:

https://brainly.com/question/13318330

#SPJ4

Yes. The frequency distribution appear to have a normal​ distribution.

To know more about frequency visit:

https://brainly.com/question/16799894

#SPJ4

The change in free energy for the hydrolysis of ATP can be calculated using the equation ΔG = ΔH - TΔS, where ΔG is the change in free energy, ΔH is the change in enthalpy, T is the temperature in Kelvin, and ΔS is the change in entropy.

To calculate ΔG for the hydrolysis of ATP in tissues at 37°C, the values of ΔH and ΔS must be known. At 37°C, the temperature must be converted to Kelvin (T = 37 + 273 = 310 K).

The specific values of ΔH and ΔS are required to determine the ΔG for the hydrolysis of ATP in tissues and can be obtained from thermodynamic databases or literature. Without these values, the ΔG cannot be calculated.

learn more about change of free energy at:

brainly.com/question/14039127

#SPJ4

The balanced equation for the combustion of pentanol (C5H12O) is:

C5H12O + 8O2 -> 5CO2 + 6H2O.

The equation tells us that for every 1 molecule of C5H12O that is burned, 8 molecules of oxygen are produced. So, if we want to produce 19.7 g of oxygen, we'll need 19.7 g / (16 g/mol) = 1.23 mol of O2.

Therefore, we'll need 1.23 mol / (8 mol O2/mol C5H12O) = 0.154 mol of C5H12O.

Finally, to find the mass of C5H12O,  multiply the number of moles by the molar mass: 0.154 mol * (88 g/mol) = 13.532 g of C5H12O.

So, to produce 19.7 g of oxygen, we need to weigh out 13.532 g of C5H12O.

To know more about the molecules click on the below link:

brainly.com/question/19922822

#SPJ4

To test for convergence/divergence using a comparison test, you need to compare the series in question with another series that is known to converge or diverge. In this case, we can compare the series a_n = n^2 / (2^n * 3^n) with the series b_n = 1/n^2. Since b_n converges, and |a_n| <= |b_n| for all n, we can conclude that a_n also converges.

To test for convergence or divergence of the series ∑a(n) = n^2/(2n^3 + 3n), one common method is the comparison test. This involves comparing the terms of the given series to the terms of another known series and determine if the terms are decreasing or increasing. If the terms of the given series are less than the terms of the known series and both series converge or diverge, then the given series will also converge or diverge. If the terms of the given series are greater than the terms of the known series and both series diverge, then the given series will also diverge. Based on this test, the series ∑a(n) may converge or diverge, further analysis is needed.

Learn more about comparison test here: brainly.com/question/30401939

#SPJ4

The acceleration of the elevator is 1.1 m/s^2.

We have given that when the elevator is at rest the scales reads 834 N.

So W = 834 N

Acceleration due to gravity , g = 9.8 m/s^2

We know that W = mg

So, m = 834/9.8 = 85.1 kg

Now as the elevator moves upward so effective acceleration = g+a

Scale reading W = 928 N and mass m = 85.1 kg.

So,

ma + mg = W

⇒ a + g = W/m

⇒ a + g = 928/ 85.1

⇒ a + g = 10.90

⇒ a = 10.90 - g

⇒ a = 10.90 - 9.80

⇒ a = 1.10 m/s^2

To know more about kinematics visit:

https://brainly.com/question/13812255

#SPJ4

The magnitude and direction of the rock's velocity at impact is - 50 deg or 50 deg below the horizontal.

vx = v0x = 25

cos35 = 20.5 m/s

vy = v0y + ay

t = (25 sin35) + (-9.8 x 3.96)

vy = -24.5 m/s

magnitude  = sqrt(vx^2 + vy^2)

= 31.9 m/s

direction = tan^-1(vy /vx)

= - 50 deg or 50 deg below the horizontal.

Take the height and multiply it by the acceleration caused by gravity twice before taking the square root of the result to determine the impact velocity. As illustrated in Figure 4.12, the magnitudes of the components of velocity v v are v x = v cos and v y = v sin, v x = v cos and v y = v sin, where v is the magnitude of the velocity and is its direction with respect to the horizontal.

Question

A Large Rock Is Ejected From The Volcano With A Speed Of 25.0 M/S And At An Angle 35.09 Above The Horizontal. The rock Strikes the side of the volcano at an altitude 20.0 m lower than its starting point. What are the magnitude and direction of the rock's velocity at impact?

Learn more about magnitude from here:

https://brainly.com/question/2596740

#SPJ4

The answer is One, so you can determine a cause and effect relationship between the variable you are changing and the observed response.

A well-designed experiment can involve many variables, including the type of experiment, the number of participants, the type of material being tested, and the conditions of the experiment. change is the variable you are changing. The effect is the observed response.

Experimental conditions can be controlled by the researcher. For example, a study of the effects of diet on heart health can be controlled by measuring the effects of different diets on heart health under different conditions.

To know more about well-designed experiment:

brainly.com/question/25219137

#SPJ4

The power that dissipated in the ground is 800MW.

Resistance is the opposition that a material or device offers to the flow of electric current, usually expressed in ohms. Resistance is a key element in the operation of electrical circuits and electronic devices, as it is used to regulate the amount of current in a circuit. The pace at which electrical energy is transported over an electric circuit is known as power. The power dissipated in the ground can be calculated using Ohm's law (P = I²R), where P is the power, I is the current, and R is the resistance. In this case, the power dissipated in the ground is equal to

P=  (20 000 A)² × (2 Ω) = 800 000 000 W ( [tex]800 MW[/tex]).

This means that the lightning strike will dissipate 800 MW of power into the ground.

learn more about Resistance Refer:brainly.com/question/29427458

#SPJ4

The length of the pendulum in cm when period is given is calculated to be 14 cm.

The period of pendulum is given as 0.755 s.

The length of the pendulum is to be found out.

We know the expression for time period as,

T = 2π √(l/g)

where,

T is time period

l is length

g is acceleration due to gravity

The value of g is 9.81 m/s².

Making l as subject, we have,

T = 2π √(l/g)

T/2π = √(l/g)

√(l/g) = T/2π

l/g = T²/4π²

Length of the pendulum l = (T²×g)/4π² = (0.755² × 9.81)/4π² = (0.57× 9.81)/39.44 = 5.59/39.44 = 0.14 m = 14 cm

To know more about pendulum:

https://brainly.com/question/27994868

#SPJ4

A student could find the total mass of copper produced by using production data, use density and volume, use chemical analysis, or consult an expert.

We can use several methods to find total mass of copper produced:

Learn more about copper here:

https://brainly.com/question/1543891

#SPJ4

Neglecting air resistance the direction of acceleration of a rock thrown straight upward is upward.

The acceleration of the rock as it is rising is upward. This is due to the force of gravity acting on the rock, which is constantly pulling it down toward the ground. As the rock moves upward, the force of gravity is still pulling it down, so the acceleration of the rock is also in the downward direction. However, since the rock is moving upwards, the acceleration is in the opposite direction of the force of gravity, so the acceleration of the rock is actually upward.

To know more about acceleration please refer:

https://brainly.com/question/2303856

#SPJ4

132 pounds are converted to kilograms. 59.8742 Formula= Divide the pertinent by 2.205 to get an approximation.

How do you use the pounds to kg conversion formula?

Add 0.45359237 kg to the given number of pounds to convert it to kilograms. For instance, multiply your given 5 pounds by 0.45359237 kg to translate 5 lbs to kilograms. Consequently, 5 lbs is roughly equivalent to 2.26796185 kg.

What is the quickest conversion factor between pounds and kilograms?

To use the conventional equation, multiply the amount of pounds by 2.2046. To convert pounds to kilograms, for instance, divide 50 by 2.2046; the result is 22.67985 kg. Divide 200 pounds by 2.2046 to get kilograms, which equals 90.71940 kg.

To know more kilograms about:

https://brainly.com/question/29761698

SPJ4

The components of x and y of the vector are calculated to be 3.22 and 3.8 respectively.

Let the vector be V.

Magnitude of |V| is given as 5 units

Angle θ is given as 50°.

The magnitude of the horizontal and vertical components are gotten by the formula below,

Vx = V cosθ

Vy = V sinθ

Putting in the known values into the above equations,

Vx = 5 cos50° = 5 × 0.64 = 3.22

Vy = 5 sin50° = 5 × 0.76 = 3.8

As cos50° and sin50° lie in the first quadrant, their values are positive.

Thus, the x and y components of vector are calculated to be 3.22 and 3.8 respectively.

To know more about vectors:

https://brainly.com/question/14545139

#SPJ4

When an electron leaves the field, its vertical position is the same as when it entered the field, with yi = 0.

A subatomic particle is the electron. All atoms contain it, and its electric charge is negative. The outermost electron shell of an atom is made up of electrons, the smallest known particle. Electrons are responsible for all electrical circuits' electric current and many of the chemical properties of atoms. They also play a role in chemical, magnetic, and electrical forces and are the building blocks of matter. The Bohr radius, which is approximately 0.53 ngströms, is the standard unit of measurement for electrons because of their extremely small size.

A. The formula for the electron's electric field wavelength is = h/(2mE), where h is the Planck constant and m is the electron's mass.

As a result, the wavelength is = 6.63 x 10⁻³⁴/(2 x 9.1 x 10⁻³¹ x 200)

                                    = 1.82 x 10⁻¹⁰ m.

B. The time it takes for the electron to traverse the electric field is calculated as :

                                          t = L/u,

where L is the plate's length.

As a result, the time at which the electron leaves the field is

                     t = 0.1/3 x 10⁶

                              = 3.33 x 10⁷ s.

The electron is in the same vertical position as it was when it entered the field, yi = 0.

Learn more about Electron's wavelength :

brainly.com/question/29219605

#SPJ4

a) To construct an Energy-Interaction diagram, we first need to identify the energy sources and interactions involved in the scenario. The energy sources in this case are gravitational potential energy and kinetic energy. At the top of the hill, the skier has potential energy due to her height above the ground and kinetic energy due to her initial velocity of 10 m/s. As she skis down the slope, she loses potential energy and gains kinetic energy. At the middle flat part (10 m), the skier's velocity can be calculated using the conservation of energy principle. The change in potential energy is equal to the change in kinetic energy.

PEinitial = mgh = 55 x 9.8 x 10 = 5390 J

KEinitial = 0.5mv^2 = 0.5 x 55 x 10^2 = 275 J

PEfinal = mgh = 55 x 9.8 x 10 = 5390 J

KEfinal = 0.5mv^2

5390 - 275 = 5390 - 0.5mv^2

v^2 = 10780/55 = 196

v = sqrt(196) = 14 m/s

So the skier's velocity at the middle flat part (10 m) is 14 m/s.

b) To find the speed of the skier at the bottom of the hill (before she starts stopping), we need to again use the conservation of energy principle. The potential energy at the bottom of the hill is zero, and all of the skier's energy is in the form of kinetic energy.

PEinitial = mgh = 55 x 9.8 x 10 = 5390 J

KEinitial = 0.5mv^2 = 0.5 x 55 x 10^2 = 275 J

PEfinal = 0

KEfinal = 0.5mv^2

5390 - 275 = 0.5mv^2

v^2 = 5115/55 = 93

v = sqrt(93) = 9.64 m/s

So the skier's velocity at the bottom of the hill (before she starts stopping) is 9.64 m/s.

c) To predict the amount of snow melted by the skier while stopping, we need to calculate the amount of energy required to melt the snow. The energy required to melt the snow is given by the heat of fusion, which is the amount of energy required to change a substance from a solid to a liquid at its melting point. For water, the heat of fusion is 333.55 J/g. We also need to know the mass of snow melted, which can be calculated using the velocity of the skier just before she comes to a stop (9.64 m/s) and the conservation of energy principle.

PEinitial = 0

KEinitial = 0.5mv^2 = 0.5 x 55 x 9.64^2 = 257 J

PEfinal = 0

Q = KEinitial

Q = 257 J

m = Q/Lf = 257/333.55 = 0.766 g

So the skier melted 0.766 g of snow while stopping.

d) To solve for the amount of snow melted using a different interval, we could use the velocity of the skier at the middle flat part (10 m) instead of the velocity just before she comes to a stop. The calculation would be the same as in c), but with the velocity being 14 m/s instead of 9.64 m/s. This

Here you can learn more about conservation of energy principle

https://brainly.com/question/122902#

#SPJ11

Steve's peak speed after applying a unit conversion from centimeters per second to kilometers per hour is 3.78 km/h

A unit conversion is when one unit of measurement is converted into another unit of measurement to convey the same property. For example, time can be expressed in minutes rather than hours, and miles can be converted to kilometers, feet, or any other unit of length measurement. Likewise, distance can be expressed in any unit of length measurement.

In this case, we are going to convert speed from centimeters per second to kilometers per hour.

1 centimeter per second equal to 0.036 kilometers per hour.

speed = (105.1 x 0.036) km/h

speed = 3.78 km/h

Thus, Steve’s peak speed would be 3.78 km/h

To learn more about unit conversion, click here:

https://brainly.com/question/13351090

#SPJ4

Yes, if we decrease r and increase F by the same quantity or vice versa then the torque remains unchanged.

Torque is defined as the cross product of the force vector and radius vector.

T = r × F

Now for the magnitude;

T = (r)(F) sinθ (where θ is the angle between r and F)

If the angle between r and F is 90 i.e. perpendicular to each other then,

T = (r)(F)

Now if we increase radius(r) by 'x' times and decrease force(F) by 'x' times or vice versa then the quantity torque of the body remains constant.

Learn more about torque here: https://brainly.com/question/20691242

#SPJ4

If a moon that looks half full is on its way to increasing into a full moon, it is called a waxing quarter.

The lunar phase or moon phase refers to the shape of the moon appearing as directly sunlit portion as viewed from the Earth. It is expressed quantitatively using areas or angles, and qualitatively using the terminology of the four major phases and four minor phases.

The four major phases are new moon, first quarter, full moon and third quarter. The four minor phases are crescent, gibbous, waxing, and waning. The quarter moon phase is also called half-moon phase the moon it half of the moon is lit by sunlight. Waxing moon refers to the phase when the moon is increasing to becoming a full moon. Hence, if a moon that looks half full is on its way to increasing into a full moon, it is called a waxing quarter.

Learn more about Lunar phase:

https://brainly.com/question/21118460

#SPJ4

The specific heat capacity of water is 4.184 J/g°C.

define temperature ?

Temperature is a measure of the thermal energy of a system. It reflects the average kinetic energy of the particles in a substance and determines its thermal state. The common unit of temperature measurement is degree Celsius (°C) or Kelvin (K).

The temperature change depends on the heat absorbed or released in the reaction, which can be calculated using the equation q = mcΔT, where q is the heat absorbed or released, m is the mass of the substance, c is its specific heat capacity, and ΔT is the change in temperature. The specific heat capacity of water is 4.184 J/g°C. To calculate the change in temperature, we need to determine the heat absorbed or released in the reaction. However, this information is not provided, so I cannot determine the temperature change.

To learn more about temperature follow the given link:

https://brainly.com/question/18367997

#SPJ4

The same axis theorem, which was developed by Christiaan Huygens & Jakob Steiner and is often known as the Huygens-Steiner theorem or simply as Steiner's theorem, can be applied.

What does the parallel axis theorem imply?

By using the object's center of gravity, the parallel column theorem can be used to rotational inertia of an area of a solid body whose direction is parallel of the known minute body.

What do the concepts of parallel and perpendicular axes theorems mean?

The parallel line theorem states that a body's time of inertia about any shaft is equal to the product of its inertial moment about its parallel axis through its center of gravity, its mass, and also the cube of the perpendiculars between its two axes.

To know more Huygens about:

https://brainly.com/question/3412409

SPJ4

The time it will take for the car moving at an acceleration of 5.00m/s² is 2.45s.

Acceleration refers to the change of velocity with respect to time (can include deceleration or changing direction).

The acceleration can be calculated using one of the equation of motions as follows:

s = ut + ½at²

Where;

15 = (0 × t) + ½ × -5 × t²

15 = 0 + -2.5t²

15 = -2.5t²

t² = 6

t = √6

t = 2.45s

Learn more about time at: https://brainly.com/question/12134554

#SPJ1

A) the phasor current can be found by dividing the phasor voltage by the impedance:

I = V_s / Z = 150 / (400 + j(105 * 3 x 10^-3)) = 0.375 / (1 + j0.315) A.

B)  the instantaneous current for the given circuit is:

i(t) = 0.375 * cos(105t + θ) A.

A series RL circuit connected to a voltage source with an equation of vs(t) = 150cos(ωt) (V) can be analyzed using the following steps:

(a) Phasor Current:

The phasor current can be found by dividing the phasor voltage by the impedance of the circuit. The impedance is given by Z = R + jwL, where j is the imaginary unit, R is the resistance, w is the angular frequency, and L is the inductance.

For the given circuit, R = 400 Ω, L = 3 mH = 3 x 10^-3 H, and w = 105 rad/s. The phasor voltage can be found by taking the phasor representation of the voltage source, which is given by V_s = 150 V.

So, the phasor current can be found by dividing the phasor voltage by the impedance:

I = V_s / Z = 150 / (400 + j(105 * 3 x 10^-3)) = 0.375 / (1 + j0.315) A.

(b) Instantaneous Current:

The instantaneous current can be found by taking the inverse Laplace transform of the phasor current. The inverse Laplace transform of the phasor current is given by:

i(t) = Re{I * e^j(ωt + θ)},

where Re{} denotes the real part of the expression, and θ is the phase angle of the phasor current.

So, the instantaneous current for the given circuit is:

i(t) = 0.375 * cos(105t + θ) A.

Learn more about phasor current here: brainly.com/question/29732568

#SPJ4

The distance of the particle from the center of the Earth is 3.42×10⁵ km, so the force on the particle due to moon is 1.24 times the force on the particle due to the Earth.

Let the mass of the Earth, = M₁

Let the mass of the moon, = M₂

Let the mass of the particle = m

Distance between the Moon and the Earth, d = 384000 km

Let the distance of the particle from the center of the earth, = d

Force on the particle due to the Earth, = GM₁m/d²

Force on the particle due to the Moon, = GM₂m/(384000-d)²

1.24 × GM₁m/d² = GM₂m/(384000-d)²

We know Earth's mass is 81 times as that of the moon. M₁ = 81M₂

1.24 × 81M₂/d² = M₂/(384000-d)²

100.44/d² = 1/(384000-d)²

1.475×10¹³ + 100.44d² - 77.14×10⁶d = d²

99.44d² - 77.14×10⁶d + 1.475×10¹³

On solving d = 4.34×10⁵ km & 3.42×10⁵ km

As 4.34×10⁵ km distance is more than the distance between the Earth and the Moon. So, taking the location of the particle between the Earth and the moon, d = 3.42×10⁵ km

To know more about moon, here

https://brainly.com/question/13386792

#SPJ4

The velocity of the truck is 5m/s.

Given:

m1 = 3000 (mass of truck)

m2 = 1000 (mass of car)

u1 = 10m/s( initial velocity of truck)

u2=0 (initial velocity of the car)

v1 =  ? (final velocity of the truck )

v2 = =15m/s (final velocity of the car)

The momentum of the system initially,

pi=m1u1+m2u2

[tex]pi = 3000 * 10 + 1000 * 0\\pi = 30000 + 0\\pi=30000[/tex]

We know that pi = pf

m1u1+m2u2=m1v1+m2v2

[tex]30000=3000v1+15000[/tex]

[tex]3000v1=30000-150003000v1=15000v1=15000/3000v1=5m/s[/tex]

What is conservation of momentum?

The conservation of momentum states that, within some problem domain, the amount of momentum remains constant; momentum is neither created nor destroyed, but only changed through the action of forces as described by Newton's laws of motion.

What is the formula law of conservation of momentum?

As a result, the equation of the law of conservation of momentum is as follows: m 1 u 1 +m 2 u 2 represents the total momentum of particles A and B before the collision, and m 1 v 1 +m 2 v 2 represents the total momentum of particles A and B after the collision.

To know more about the conservation of momentum:

https://brainly.com/question/7538238

#SPJ4

Its speed at the instant when its displacement is 0. 041 m is 0.4321 m / s

Utilizing energy efficiency at two locations the place of interest and the furthest point of greatest elongation

Maximum initial elongation

Em₀ = K= ½ k x²

k=Force constant

K= energy

x= Spring displacement

we know, x = A = 0.082 m.

Final point of interest

Em= Ke = ½ m v²

Energy is conserved

 Em₀ = Em

 ½ k A² = ½ m v²

  v² = k / m A²

  v = √(k/m) A

Then we can calculate

  v = √(k/m) A

  v = √ (10 / 0.36) 0.082

  v = 0.4321 m / s

Learn more about  conservation of energy https://brainly.com/question/2137260

#SPJ4

A) the height the object reaches is 0.148 m.

B) the velocity of the object 0.380 seconds after release is 10.79 m/s.

a) To find the height the object reaches, we need to find the vertical component of velocity. We can use the following equation:

Vy = V0y + ayt

Where V0y is the initial vertical velocity (0 m/s, since the object was thrown from rest), a is acceleration due to gravity (-9.8 m/s^2), t is time (0.430 s), and Vy is the final vertical velocity.

Plugging in the values, we get:

Vy = 0 + (-9.8)(0.430) = -4.266 m/s

Next, we can find the height using the following equation:

y = V0yt + (1/2)at^2

Plugging in the values, we get:

y = (0)(0.430) + (1/2)(-9.8)(0.430)^2 = -0.148 m

So, the height the object reaches is 0.148 m.

b) To find the velocity of the object 0.380 seconds after release, we need to use the following equation:

V = V0 + at

Where V0 is the initial velocity (25.2 km/h converted to m/s), a is acceleration due to gravity (-9.8 m/s^2), and t is time (0.380 s).

Plugging in the values, we get:

V = 25.2 * 1000/3600 + (-9.8)(0.380) = 10.79 m/s

So, the velocity of the object 0.380 seconds after release is 10.79 m/s.

Learn more about velocity here: brainly.com/question/18084516

#SPJ4