What can be concluded if ∠EJS and ∠SJV form a linear pair?

Answer:

mean=sum of all numbers /total no of data

50+51+56+52+57+60+62/7

388/7

55.42857. or 55 3/7

The Fourier series for f(x) is: f(x) = \frac{\pi^2}{3} + \sum_{n=1}^{\infty} \frac{2}{n^2} \cos(nx)$

The Fourier series of f(x) = x^2, where -π < x < π, can be found using the formula:

$a_0 = \frac{1}{2\pi} \int_{-\pi}^{\pi} x^2 dx = \frac{\pi^2}{3}$

$a_n = \frac{1}{\pi} \int_{-\pi}^{\pi} x^2 \cos(nx) dx = \frac{2}{n^2}$

$b_n = 0$ for all n, since f(x) is an even function

Know more about Fourier series here:

https://brainly.com/question/31705799

#SPJ11

The average atomic mass of the element in the data table is given as follows:

28.1 amu.

The mean of a data-set is given by the sum of all observations in the data-set divided by the cardinality of the data-set, which represents the number of observations in the data-set.

For the weighed mean, we calculate the mean as the sum of each observation multiplied by it's weight.

Hence the average atomic mass of the element in the data table is given as follows:

0.922297 x 27.977 + 0.046832 x 28.976 + 0.030872 x 29.974 = 28.1 amu.

More can be learned about the mean of a data-set at https://brainly.com/question/1136789

#SPJ1

The solutions {sin(x), sin(x) - cos(x)} are linearly Independent since the linear combination equals zero only when all the coefficients are zero

To test the given set of solutions {sin(x), sin(x) - cos(x)} for linear independence, we can check if the linear combination of the solutions equals the zero vector only when all the coefficients are zero.

Let's consider the linear combination:

c1sin(x) + c2(sin(x) - cos(x)) = 0

Expanding this equation:

c1sin(x) + c2sin(x) - c2*cos(x) = 0

Rearranging terms:

sin(x)*(c1 + c2) - cos(x)*c2 = 0

This equation holds for all x if and only if both the coefficients of sin(x) and cos(x) are zero.

From the equation, we have:

c1 + c2 = 0

-c2 = 0

Solving this system of equations, we find that c1 = 0 and c2 = 0. This means that the only solution to the linear combination is the trivial solution, where all the coefficients are zero

Therefore, the solutions {sin(x), sin(x) - cos(x)} are linearly independent since the linear combination equals zero only when all the coefficients are zero

To know more about linearly Independent .

https://brainly.com/question/31328368

#SPJ11

The only solution to the linear combination being equal to zero is when both coefficients are zero. Hence, the given set of solutions {sin(x), sin(x) − cos(x)} is linearly independent.

To test the given set of solutions for linear independence, we need to check whether the linear combination of these solutions equals zero only when all coefficients are zero.

Let's write the linear combination of the given solutions:

c1 sin(x) + c2 (sin(x) - cos(x))

We need to find whether there exist non-zero coefficients c1 and c2 such that this linear combination equals zero for all x.

If we simplify this expression, we get:

(c1 + c2) sin(x) - c2 cos(x) = 0

For this equation to hold for all x, we must have:

c1 + c2 = 0 and c2 = 0

The second equation implies that c2 must be zero. Substituting this into the first equation, we get:

c1 = 0

Know more about linear combination here:

https://brainly.com/question/30888143

#SPJ11

The inverse Laplace transform of 1/((s-1)^2 (s+1)) is (1/4)e^t - (1/2)te^t + (1/4)e^(-t).

To find the inverse Laplace transform of the given function:

F(s) = 1 / ((s-1)^2 (s+1))

We can use partial fraction decomposition to break it down into simpler terms:

F(s) = A / (s-1) + B / (s-1)^2 + C / (s+1)

To solve for the coefficients A, B, and C, we can multiply both sides of the equation by the denominator and substitute in values of s to obtain a system of linear equations. After solving for A, B, and C, we get:

A = 1/4, B = -1/2, and C = 1/4

Now, we can use the inverse Laplace transform formulas to obtain the time domain function:

f(t) = (1/4)e^t - (1/2)te^t + (1/4)e^(-t)

Therefore, the inverse Laplace transform of 1/((s-1)^2 (s+1)) is (1/4)e^t - (1/2)te^t + (1/4)e^(-t).

To know more about  inverse Laplace .

https://brainly.com/question/27753787

#SPJ11

The inverse Laplace transform of 1/(s-1)^2(s+1) is 1/2 e^t + 1/2 t e^t - 1/4 e^-t.

The inverse Laplace transform of 1/(s-1)^2(s+1) is:

f(t) = L^-1 {1/(s-1)^2(s+1)}

Using partial fraction decomposition:

1/(s-1)^2(s+1) = A/(s-1) + B/(s-1)^2 + C/(s+1)

Multiplying both sides by (s-1)^2(s+1), we get:

1 = A(s-1)(s+1) + B(s+1) + C(s-1)^2

Substituting s=1, we get:

1 = 2B

B = 1/2

Substituting s=-1, we get:

1 = 4C

C = 1/4

Substituting B and C back into the equation, we get:

1/(s-1)^2(s+1) = 1/(2(s-1)) + 1/(2(s-1)^2) - 1/(4(s+1))

Taking the inverse Laplace transform of each term, we get:

f(t) = L^-1 {1/(2(s-1))} + L^-1 {1/(2(s-1)^2)} - L^-1 {1/(4(s+1))}

Using the Laplace transform table, we get:

f(t) = 1/2 e^t + 1/2 t e^t - 1/4 e^-t

Know more about inverse Laplace transform here:

https://brainly.com/question/31322563

#SPJ11

the solution to the linear modular system {x = 5 (mod 9), x = -5 (mod 11)} is x ≡ 39 (mod 99) using Chinese Remainder Theorem.

To solve the linear modular system {x = 5 (mod 9), x = 1 (mod 11)}, we first note that 9 and 11 are coprime. Therefore, the Chinese Remainder Theorem guarantees the existence of a unique solution modulo 9 x 11 = 99.

To find this solution, we follow the method given in the proof of the theorem. We begin by solving each congruence modulo the respective prime power. For the congruence x = 5 (mod 9), we have x = 5 + 9m for some integer m. Substituting into the second congruence, we get:

5 + 9m ≡ 1 (mod 11)
9m ≡ 9 (mod 11)
m ≡ 1 (mod 11)

So we have m = 1 + 11n for some integer n. Substituting back into the first congruence, we get:

x = 5 + 9m = 5 + 9(1 + 11n) = 98 + 99n

Therefore, the solution to the linear modular system {x = 5 (mod 9), x = 1 (mod 11)} is x ≡ 98 (mod 99).

To solve the linear modular system {x = 5 (mod 9), x = -5 (mod 11)}, we follow the same method. Again, we note that 9 and 11 are coprime, so the Chinese Remainder Theorem guarantees a unique solution modulo 99.

Solving each congruence modulo the respective prime power, we have:

x = 5 + 9m
x = -5 + 11n

Substituting the second congruence into the first, we get:

-5 + 11n ≡ 5 (mod 9)
2n ≡ 7 (mod 9)
n ≡ 4 (mod 9)

So we have n = 4 + 9k for some integer k. Substituting back into the second congruence, we get:

x = -5 + 11n = -5 + 11(4 + 9k) = 39 + 99k

Therefore, the solution to the linear modular system {x = 5 (mod 9), x = -5 (mod 11)} is x ≡ 39 (mod 99).

Learn more about chinese remainder theorem here:

https://brainly.com/question/30806123

#SPJ11

In order to derive cosh^2(x) sinh^2(x) = cosh(2x), we can use the definitions of hyperbolic cosine and sine functions:

cosh(x) = (e^x + e^(-x)) / 2

sinh(x) = (e^x - e^(-x)) / 2

We want to derive the identity cosh^2(x) sinh^2(x) = cosh(2x) using the hyperbolic cosine and sine definitions. First, we'll square the definitions of cosh and sinh:

cosh^2(x) = (e^x + e^(-x))^2 / 4

sinh^2(x) = (e^x - e^(-x))^2 / 4

Multiplying these expressions together, we get:

cosh^2(x) sinh^2(x) = (e^x + e^(-x))^2 / 4 * (e^x - e^(-x))^2 / 4

= (e^2x + 2 + e^(-2x)) / 16 * (e^2x - 2 + e^(-2x)) / 16

= (e^4x - 4 + 6 + e^(-4x)) / 256

= (e^4x + 2e^(-4x) + 2) / 16

Next, we'll use the identity cosh(2x) = cosh^2(x) + sinh^2(x) to express cosh(2x) in terms of cosh(x) and sinh(x):

cosh(2x) = cosh^2(x) + sinh^2(x)

= (e^x + e^(-x))^2 / 4 + (e^x - e^(-x))^2 / 4

= (e^2x + 2 + e^(-2x)) / 4

Now we can substitute this expression into our previous result:

cosh^2(x) sinh^2(x) = (e^4x + 2e^(-4x) + 2) / 16

= (cosh(2x) + 1) / 8

Thus we have shown that cosh^2(x) sinh^2(x) = (cosh(2x) + 1) / 8, which is equivalent to the identity cosh2(x) sinh2(x) = cosh(2x).

To learn more about cosine function visit : https://brainly.com/question/8120556

#SPJ11

it will take the receptionist 20 hours to type up the day's documents on her own when the assistant is absent.

When working together, their combined typing speed is (x + 3x) documents per hour, which is equal to 4x documents per hour.

Given that they can type up a day's worth of documents in 5 hours when working together, we can set up the following equation:

5 * 4x = 1

Simplifying the equation:

20x = 1

To find the receptionist's typing speed when working alone, we substitute x with 3x:

20 * 3x = 1

Simplifying the equation again:

60x = 1

Dividing both sides of the equation by 60:

x = 1/60

Therefore, the assistant's typing speed is 1/60 documents per hour.

To find the number of hours, n, it will take the receptionist to type up the day's documents on her own

n = 1 / (3x)

Substituting x with 1/60:

n = 1 / (3 * 1/60)

n = 1 / (1/20)

n = 20

Hence, it will take the receptionist 20 hours to type up the day's documents on her own when the assistant is absent.

Learn more about equation at https://brainly.com/question/29174899

#SPJ1

The volume of water in the pool is 942 cubic feet.

Here, we have

Given:

A swimming pool with a diameter of 20 feet and a height of 4.5 feet is being filled by Mateo. He adds water till it is 3 feet deep. The pool's water volume must be determined.

Use the formula for the volume of a cylinder, which is provided as V = r2h, to get the volume of the cylinder pool. V stands for the cylinder's volume, r for its radius, h for its height, and for pi number, which is 3.14.

Here, we have a diameter = 20 feet.

As a result, the cylinder's radius is equal to 10 feet, or half of its diameter.

We are also informed that the cylinder has a height of 4.5 feet and a depth of 3 feet.

As a result, the pool's water level is 3 feet high. When the values are substituted into the formula, we get:

V = πr²h = 3.14 x 10² x 3 = 942 cubic feet

Therefore, the volume of water in the pool is 942 cubic feet.

To learn about the volume of the cylinder here:

https://brainly.com/question/27535498

#SPJ11

The indefinite integral of (2ti + j + 3k) dt is t^2i + tj + 3tk + C, where C is the constant of integration.

To find the indefinite integral of (2ti + j + 3k) dt, we integrate each component separately. The integral of 2ti with respect to t is (1/2)t^2i, as we increase the exponent by 1 and divide by the new exponent. The integral of j with respect to t is just tj, as j is a constant.

The integral of 3k with respect to t is 3tk, as k is also a constant. Finally, we add the constant of integration C to account for any potential constant terms. Therefore, the indefinite integral is t^2i + tj + 3tk + C.

For more questions like Integral click the link below:

https://brainly.com/question/18125359

#SPJ11

(a) After integrating and simplification, the ∫(3x² - 4)² x³ dx is 9(x⁸/8) - 24(x⁵/5) + 16(x⁴/4) + C, and also

(b) The integral ∫(x + 3)/x⁷ dx is = (-1/5x⁵) - (1/2x⁶) + C.

Part(a) : We have to integrate : ∫(3x² - 4)² x³ dx,

We simplify using the algebraic-identity,

= ∫(9x² - 24x + 16) x³ dx,

= ∫9x⁷ - 24x⁴ + 16x³ dx,

On integrating,

We get,

= 9(x⁸/8) - 24(x⁵/5) + 16(x⁴/4) + C,

Part (b) : We have to integrate : ∫(x + 3)/x⁷ dx,

On simplification,

We get,

= ∫(x/x⁷ + 3/x⁷)dx,

= ∫(1/x⁶ + 3/x⁷)dx,

= ∫(x⁻⁶ + 3x⁻⁷)dx,

On integrating,

We get,

= (-1/5x⁵) - (3/6x⁶) + C,

= (-1/5x⁵) - (1/2x⁶) + C,

Learn more about Integration here

https://brainly.com/question/32151209

#SPJ4

The given question is incomplete, the complete question is

(a) Use algebra to rewrite the integrand; then integrate and simplify. (Use C for the constant of integration.)

∫(3x² - 4)² x³ dx,

(b) Use algebra to rewrite the integrand; then integrate and simplify. (Use C for the constant of integration.)

∫(x + 3)/x⁷ dx.

The graph is attached below.

To plot the graph of the equation y = tan(x + 90°) - 1, we can follow these steps:

x | y = tan(x + 90°) - 1

-180° | undefined

-135° | 1

-90° | 0

-45° | -1

0° | undefined

45° | -1

90° | 0

135° | 1

180° | undefined

Note: The values are given in degrees.

Here is a graph of the equation y = tan(x + 90°) - 1 is attached.

Learn more about graphs here:

https://brainly.com/question/17267403

#SPJ1

To find the pattern in the given sequence, we can observe that each term increases by 3.

Using this pattern, we can determine the next terms of the sequence:

6, 9, 12, 15, 18, ...

So the first three terms are 6, 9, and 12.Starting with the first term, which is 6, we add 3 to get the second term: 6 + 3 = 9.

Similarly, we add 3 to the second term to get the third term: 9 + 3 = 12.

If we continue this pattern, we can find the next terms of the sequence by adding 3 to the previous term:

12 + 3 = 15

15 + 3 = 18

18 + 3 = 21

...

So, the sequence continues with 15, 18, 21, and so on, with each term obtained by adding 3 to the previous term.

Learn more about sequence Visit : brainly.com/question/7882626

#SPJ11

The height, in inches, of the original paper include the following: C- 1 5/8 inches.

In Mathematics and Statistics, a line plot is a type of graph that is used for the graphical representation of data set above a number line, while using crosses, dots, or any other mathematical symbol.

Based on the information provided about the pile of paper that Lauren divided into 5 stacks, we would determine the height of the original paper in inches as follows;

Height of original paper = 1 + 1/8 + 4/8

Height of original paper = 1 + 5/8

Height of original paper = 1 5/8 inches.

Read more on line plot here: brainly.com/question/28741427

#SPJ4

Missing information:

The question is incomplete and the complete question is shown in the attached picture.

It is important to consider the limitations of the regression line and the potential consequences of extrapolation before making any predictions outside of the range of observed data.  Option D is the correct answer.

The answer to whether it is appropriate to use a regression line to predict y-values for x-values that are not in (or close to) the range of x-values found in the data depends on the context and purpose of the analysis.

However, in general, option D, "It is not appropriate because the regression line models the trend of the given data, and it is not known if the trend continues beyond the range of those data" is the most accurate.

The regression line represents the trend observed in the given data and is not necessarily indicative of what may happen outside of that range.

Extrapolating beyond the range of data can lead to unreliable predictions, and it is better to use caution and only make predictions within the range of observed data.

To learn more about :  regression line

https://brainly.com/question/17004137

#SPJ11

D. It is not appropriate because the regression line models the trend of the given data, and it is not known if the trend continues beyond the range of those data.

D. It is not appropriate because the regression line models the trend of the given data, and it is not known if the trend continues beyond the range of those data. The regression line is based on the values within the range of the data, and extrapolating outside of that range may not accurately reflect the trend. It is important to consider the limitations of the data and the model when using regression to make predictions.

The term "regression" was coined by Francis Galton in the 19th century to describe a biological phenomenon. The result is that the height of descendants of higher ancestors returns to the original mean (this phenomenon is also called regression to the mean).

Learn more about regression lines:

brainly.com/question/29753986

#SPJ11

An integrator is a type of electronic circuit that performs integration of an input signal. It is commonly used in electronic applications such as filters, amplifiers, and waveform generators.

In an ideal integrator circuit, the output voltage is proportional to the integral of the input voltage with respect to time. The transfer function of an ideal integrator is given by:

watts) = - (1 / RC) * ∫ Vin(s) ds

where watt (s) and Vin(s) are the Laplace transforms of the output and input voltages, respectively, R is the resistance in the circuit, C is the capacitance in the circuit, and ∫ represents integration.

When we analyze the phase shift of the output voltage with respect to the input voltage in the frequency domain, we find that it is -90 degrees, or a phase lag of 90 degrees.

This is because the transfer function of the integrator circuit contains an inverse Laplace operator (1/s) which produces a -90 degree phase shift.

The inverse Laplace transform of 1/s is a ramp function, which has a phase shift of -90 degrees relative to a sinusoidal input signal.

Therefore, the integrator circuit introduces a phase shift of -90 degrees to any sinusoidal input signal, which means that the output lags behind the input by 90 degrees.

In summary, the phase shift of an integrator circuit is 90 degrees because of the inverse Laplace operator (1/s) in its transfer function, which produces a phase shift of -90 degrees relative to a sinusoidal input signal.

To Know more about phase shift refer here

https://brainly.com/question/4430105#

#SPJ11

The equation we'll work with is: cosθcotθ + sinθ = cosecθ
- Rewrite the terms in terms of sine and cosine.
 cosθ (cosθ/sinθ) + sinθ = 1/sinθ

-Simplify the equation by distributing and combining terms.
(cos²θ/sinθ) + sinθ = 1/sinθ

- Make a common denominator for the fractions.
(cos²θ + sin²θ)/sinθ = 1/sinθ

-Use the Pythagorean identity, which states that cos²θ + sin²θ = 1.
1/sinθ = 1/sinθ
Now, we have shown that the left side of the equation is equal to the right side, thus proving that cosθcotθ + sinθ = cosecθ is an identity.

To know more about "Pythagorean identity" refer here:

https://brainly.com/question/95257#

#SPJ11

Using implicit differentiation, The equation of the tangent line to the curve at (1, 2) is: y = (-1/3)x + (7/3)

For the curve sin(x+y) = 2x-2y at the point (pi, pi):

Taking the derivative of both sides with respect to x using the chain rule, we get:

cos(x+y) (1 + dy/dx) = 2 - 2dy/dx

Simplifying, we get:

dy/dx = (2 - cos(x+y)) / (2 + cos(x+y))

At the point (pi, pi), we have x = pi and y = pi, so cos(x+y) = cos(2pi) = 1.

Therefore, the slope of the tangent line at (pi, pi) is:

dy/dx = (2 - cos(x+y)) / (2 + cos(x+y)) = (2 - 1) / (2 + 1) = 1/3

Using the point-slope form of the equation of a line, the equation of the tangent line at (pi, pi) is:

y - pi = (1/3)(x - pi)

Simplifying, we get:

y = (1/3)x + (2/3)pi

For the hyperbola x^2 + 2xy - y^2 + x = 2 at the point (1, 2):

Taking the derivative of both sides with respect to x using the product rule, we get:

2x + 2y + 2xdy/dx + 1 = 0

Solving for dy/dx, we get:

dy/dx = (-x - y - 1) / (2x + 2y)

At the point (1, 2), we have x = 1 and y = 2, so the slope of the tangent line at (1, 2) is:

dy/dx = (-x - y - 1) / (2x + 2y) = (-1-2-1)/(2+4) = -2/6 = -1/3

Using the point-slope form of the equation of a line, the equation of the tangent line at (1, 2) is:

y - 2 = (-1/3)(x - 1)

Simplifying, we get:

y = (-1/3)x + (7/3)

To know more about implicit differentiation refer here :

https://brainly.com/question/11887805#

#SPJ11

The correct answer is "h(x) = 6x² - 12x." The other options you listed do not match the correct expression obtained by multiplying f(x) and g(x).

To find h(x) = f(x)g(x), we need to multiply the equations for f(x) and g(x):

f(x) = 2x - 4

g(x) = 3x

Multiplying these equations gives:

h(x) = f(x)g(x) = (2x - 4)(3x)

Using the distributive property, we can expand this expression:

h(x) = 2x × 3x - 4 × 3x

h(x) = 6x² - 12x

So, the correct expression for h(x) is h(x) = 6x² - 12x.

Among the options you provided, the correct answer is "h(x) = 6x² - 12x." The other options you listed do not match the correct expression obtained by multiplying f(x) and g(x).

It's important to note that the equation h(x) = 6x² - 12x represents a quadratic function, where the highest power of x is 2. The coefficient 6 represents the quadratic term, while the coefficient -12 represents the linear term.

Learn more about  expression here:

https://brainly.com/question/30350742

#SPJ11

3.1. No, {b} is not necessarily in the Sigma Algebra if {a} is.

3.2. No, {c} is not necessarily in the Sigma Algebra if {a} and {b} are.

In the context of the sample space S = {a, b, c, d} and the Sigma Algebra, we cannot conclude that {b} is necessarily in the Sigma Algebra if {a} is. Similarly, we cannot conclude that {c} is necessarily in the Sigma Algebra if both {a} and {b} are.

A Sigma Algebra, also known as a sigma-field or a Borel field, is a collection of subsets of the sample space that satisfies certain properties. It must contain the sample space itself, be closed under complementation (if A is in the Sigma Algebra, its complement must also be in the Sigma Algebra), and be closed under countable unions (if A1, A2, A3, ... are in the Sigma Algebra, their union must also be in the Sigma Algebra).

In 3.1, if {a} is in the Sigma Algebra, it means that the set {a} and its complement are both in the Sigma Algebra. However, this does not guarantee that {b} is in the Sigma Algebra because {b} may or may not satisfy the properties required for a set to be in the Sigma Algebra.

Similarly, in 3.2, even if {a} and {b} are both in the Sigma Algebra, it does not necessarily imply that {c} is also in the Sigma Algebra. Each set must individually satisfy the properties of the Sigma Algebra, and the presence of {a} and {b} alone does not determine whether {c} meets those requirements.

Learn more about Sigma Algebra

brainly.com/question/31956977

#SPJ11

∫∫∫E(x^2+y^2)^(1/3) dV = ∫∫∫E(r^2)^(1/3) r dr dθ

What is the integral of r^2^(1/3) over region E in cylindrical coordinates?

In cylindrical coordinates, the given function ((x^2+y^2)^(1/3)) simplifies to (r^2)^(1/3) or r^(2/3). To integrate this function over the region E bounded by the xy plane and the paraboloid 10−7x^2−7y^2, we convert the Cartesian coordinates to cylindrical coordinates.

Let's rewrite the bounds in terms of cylindrical coordinates:

A = (0, 0, 0)

B = (r, θ, 0)   (r > 0, 0 ≤ θ ≤ 2π, 0 ≤ z ≤ 10 - 7r^2)

C = (r, θ, z)   (r > 0, 0 ≤ θ ≤ 2π, 0 ≤ z ≤ 10 - 7r^2)

D = (0, θ, 0)   (0 ≤ θ ≤ 2π)

E = (r, θ, 0)   (r > 0, 0 ≤ θ ≤ 2π)

F = (r, θ, 10 - 7r^2)   (r > 0, 0 ≤ θ ≤ 2π)

G(z, r, θ) = r^(2/3)

Now, we can set up the triple integral:

∫∫∫E(r^2)^(1/3) r dr dθ = ∫₀²π ∫₀²√(10-z/7) r^(2/3) dr dθ ∫₀¹⁰-7r²  dz

Learn more about Cylindrical coordinates

brainly.com/question/30394340

#SPJ11

The minimum service rate that must be provided is 1.609 units per period.

To solve this problem, we need to use the M/M/1 queueing model, where the arrival process follows a Poisson distribution, the service process follows an exponential distribution, and there is one server.

We can use Little's law to relate the average number of units in the system to the arrival rate and the average service time:

L = λ * W

where L is the average number of units in the system, λ is the arrival rate, and W is the average time spent in the system.

From the problem statement, we want to find the minimum service rate  in the system not exceeding 0.20. This means that we want to find the maximum value of W such that P(W ≥ 0.20) ≤ 0.80.

Using the M/M/1 queueing model, we know that the average time spent in the system is:

W = Wq + 1/μ

where Wq is the average time spent waiting in the queue and μ is the service rate.

Since we want to find the minimum service rate, we can assume that there is no waiting in the queue (i.e., Wq = 0).

Plugging in Wq = 0 and λ = 0.5 into Little's law, we get:

L = λ * W = λ * (1/μ)

Since we want P(W ≥ 0.20) ≤ 0.80, we can use the complementary probability:

P(W < 0.20) ≥ 0.20

Using the formula for the exponential distribution, we can calculate:

P(W < 0.20) = 1 - e^(-μ * 0.20)

Setting this expression greater than or equal to 0.20 and solving for μ, we get:

μ ≥ -ln(0.80) / 0.20 ≈ 1.609

To know more about minimum service rate refer here:

https://brainly.com/question/1501065

#SPJ11

The differential of surface area is dS = √((u - veu)² + (-uv)² + (eu²)²) du dv.

The differential of surface area for the surface S described by the parametrization r(u, v) = eu cos(v), eu sin(v), uv is found by computing the cross product of partial derivatives of r with respect to u and v, and then finding its magnitude.

1. Find the partial derivatives:
  ∂r/∂u = (eu cos(v), eu sin(v), v)
  ∂r/∂v = (-eu sin(v), eu cos(v), u)

2. Compute the cross product:
  (∂r/∂u) x (∂r/∂v) = (u - veu sin²(v) - veu cos²(v), -uv, eu²)

3. Find the magnitude:
  |(∂r/∂u) x (∂r/∂v)| = √((u - veu)² + (-uv)² + (eu²)²)

4. The differential of surface area dS is:
  dS = |(∂r/∂u) x (∂r/∂v)| du dv

To know more about partial derivatives  click on below link:

https://brainly.com/question/31397807#

#SPJ11

To change from rectangular to cylindrical coordinates for the point (5, 3, -9), we need to find the radius, angle, and height of the point.

To change from rectangular to cylindrical coordinates, we need to find the radius (r), the angle (θ), and the height (z) of the point in question.

Starting with the point (5, 3, -9), we can find the radius r using the formula:
r = √(x^2 + y^2)

In this case, x = 5 and y = 3, so
r = √(5^2 + 3^2)
r = √34

Next, we can find the angle θ using the formula:
θ = arctan(y/x)

In this case, y = 3 and x = 5, so

θ = arctan(3/5)
θ ≈ 0.5404

Finally, we can find the height z by simply taking the z-coordinate of the point, which is -9.

Putting it all together, the cylindrical coordinates of the point (5, 3, -9) are:
(r, θ, z) = (√34, 0.5404, -9)

So the long answer to this question is that to change from rectangular to cylindrical coordinates for the point (5, 3, -9), we need to find the radius, angle, and height of the point.

Using the formulas r = √(x^2 + y^2), θ = arctan(y/x), and z = z, we can calculate that the cylindrical coordinates of the point are (r, θ, z) = (√34, 0.5404, -9).

Know more about cylindrical coordinates here:

https://brainly.com/question/31397074

#SPJ11

Answer:

73

Step-by-step explanation:

Call the unknown test score x.

Add up the test scores.

70+60+77+x

divide by 4, and we want that to equal 70.

So the equation is:

(70+60+77+x)/4 = 70

Solve for x

70+60+77+x = 280

x= 280-70-60-77

x = 73

the actual distance between Snake World and the International Space Center is 76 miles.

To find the actual distance in miles between Snake World and the International Space Center, we need to use the given scale of the map: 5 inches = 95 miles.

If 5 inches on the map represents 95 miles, we can set up a proportion to find the actual distance in miles for the measured length on the map.

Let's denote the actual distance in miles as "x".

According to the given scale, we have the proportion:

5 inches / 95 miles = 4 inches / x miles

We can cross-multiply to solve for x:

5 inches * x miles = 4 inches * 95 miles

Simplifying further:

5x = 380

Dividing both sides by 5:

x = 380 / 5

Calculating the value:

x = 76

To know more about distance visit:

brainly.com/question/15172156

#SPJ11

To evaluate the expression arcsin(-3√2) over the interval [-π/2,π/2], we need to find the angle θ that satisfies sin(θ) = -3√2.

Since sin is negative in the second and third quadrants, we can narrow down the possible values of θ to the interval [-π, -π/2) and (π/2, π].

To find the exact value of θ, we can use the inverse sine function, also known as arcsine:

θ = arcsin(-3√2) = -1.177 radians (rounded to three decimal places)

Since -π/2 < θ < π/2, the angle θ is within the given interval [-π/2, π/2].

Therefore, the evaluated expression is -1.177 radians.

Learn more about third quadrants: https://brainly.com/question/863849

#SPJ11

the height is 3.5m nearest tenth of a meter, corresponding to the 3.4-m base.

We know that the area of a parallelogram is given by A = base x height. Since the given parallelogram has two bases with different lengths, we will need to find the length of the other height to be able to calculate the area of the parallelogram.

Using the given measurements, let's call the 17.3m base as "b1" and its corresponding height as "h1", and call the 43.4m base as "b2" and its corresponding height as "h2".

From the given problem, we are given:

b1 = 17.3mh1 = 8.7m andb2 = 43.4m

Now, let's solve for h2:

Since the area of the parallelogram is the same regardless of which base we use, we can say that

A = b1*h1 = b2*h2  Substituting the given values, we have:

17.3m x 8.7m = 43.4m x h2  

Simplifying: 150.51 sq m = 43.4m x h2h2 = 150.51 sq m / 43.4mh2 = 3.46636...

The height corresponding to the 43.4m base is 3.5m (rounded to the nearest tenth of a meter).Therefore, the height corresponding to the 43.4-m base is 3.5 meters.

Here, we are given that the parallelogram has sides of 17.3m and 43.4m, and its corresponding height is 8.7m. We are asked to find the length of the height corresponding to the 43.4m base.

Since the area of a parallelogram is given by A = base x height, we can use this formula to solve for the length of the other height of the parallelogram. We can call the 17.3m base as "b1" and its corresponding height as "h1", and call the 43.4m base as "b2" and its corresponding height as "h2".

Using the formula A = b1*h1 = b2*h2, we can find h2 by substituting the values we have been given.

Solving for h2, we get 3.46636.

Rounding to the nearest tenth of a meter, we get that the length of the height corresponding to the 43.4m base is 3.5m. Therefore, the answer is 3.5m.

To know more about parallelogram visit:

brainly.com/question/28854514

#SPJ11

We can calculate the amount of money Bonnie will have in her savings account after 3 years using the simple interest formula:

A = P(1 + rt)

where A is the total amount of money at the end of the time period, P is the initial principal or deposit, r is the annual interest rate (as a decimal), and t is the time period in years.

In this case, Bonnie deposits $70.00 into her savings account and earns 4.5% simple interest a year. We know that she does not add or take out any money for 3 years. Therefore:

P = $70.00

r = 0.045 (since the interest rate is given as a percentage, we need to divide by 100 to get the decimal form)

t = 3 years

Plugging these values into the formula, we get:

A = $70.00(1 + 0.045 x 3)

A = $70.00(1.135)

A = $79.45

Therefore, Bonnie will have $79.45 in her savings account at the end of 3 years.

To learn more about simple interest click here : brainly.com/question/30964674

#SPJ11