What are the byproducts of nuclear energy and what are the options for disposing of the waste?

Her average velocity is 2.65 m/s to the nearest tenth of a m/s.

The measure of average velocity is a vector. Average velocity is calculated by dividing the change in position or displacement (x) by the time intervals (t) during which the displacement takes place. Depending on the direction of the displacement, the average velocity may be positive or negative. Meters per second (m/s or ms-1) is the SI unit for average speed.

Only the object's displacement is considered when calculating average velocity. However, the displacement's size might differ from the actual path's length. For this reason, we use average speed to describe the rate of motion along a path.

Average speed is calculated by dividing the total distance travelled by the total motion time. The average speed is a scalar quantity, in contrast to the average velocity.

Given distance: 248

and = 345 m

Time for both= 130 s

We know that average velocity = Distance + Distance  / time

Therefore,

Average velocity = (248 + 97) / (130)

Average velocity = 69/26

Average velocity = 2.65 m/s

Thus, her average velocity is 2.65 m/s to the nearest tenth of a m/s.

Learn more about average velocity

https://brainly.com/question/862972?

#SPJ1

The moment should exerted by the weight on his shoulder at point s is also 1826 in.lb.

This means that the weight exerts the same amount of torque on the shoulder as it does on the elbow.

The moment of a force is calculated by multiplying the force by the perpendicular distance between the force & the point where the moment is measured. Since the weight remains the same and the perpendicular distance between the weight and the shoulder and elbow are the same: the moment exerted by the weight on both points is equal. This is important information for understanding the mechanics of the body and how forces affect different points.

No picture is provided. However, the answer might still be relevant.

Learn more about athlete holds the barbell brainly.com/question/13490225

#SPJ4

(i ) The velocity of the car at the bottom of the hill is 31.3 m/s.

(ii) The height at which it will have half the speed is 12.5 m.

The velocity of the car at the bottom of the hill is calculated by applying the  principle of conservation of energy as follows;

¹/₂mv² = mgh

v = √ (2 gh )

where;

v = √ (2 x 9.8 x 50 )

v = 31.3 m/s

The height at which it will have half the speed is calculated as;

¹/₂v  = ¹/₂ ( 31.3 m/s ) = 15.65 m/s

h = v² / 2g

h = ( 15.65² ) / ( 2 x 9.8 )

h = 12.5 m

Learn more about velocity here: https://brainly.com/question/25905661

#SPJ1

The separation between the double slits is  0.0506 mm.

Interference in physics is a phenomena when two waves merge by adding their displacements at each and every point in space and time to produce a new wave that has a higher, lower, or identical amplitude.

The angular separation is = 6.5° = 6.5 × π/180

Wavelength of light is = 575 nm =  575 × 10⁻⁹ m

Let the separation between the double slits = d m.

Then;

6.5 × π/180 = 575 × 10⁻⁹/d

d = 5.06 × 10⁻⁶ meter

= 0.0506 mm.

Hence, the separation between the double slits is  0.0506 mm.

Learn more about interference here:

https://brainly.com/question/16098226

#SPJ1

Answer:

Boiling is the process where liquid (water) changes to gas (vapor) directly by no cooling process. As it's boiling, heat is being continuously give continuously so how can cooling happen?

But in the another way this statement can be correct too as evaporation too changes liquid to gas but does cools the liquid as high energetic liquid particles are escaping while leaving down the low energetic particles causing cooling.

To sum it up, boiling doesn't make any cooling.

True, astronomers split up the ancient constellation of argo navis because it was too large to be useful as a celestial landmark.

Why was Argo Navis a constellation but is no longer?

The only star design that was abandoned due to strictly practical considerations is Argo Navis; it was simply too large. So Nicolas Louis de Lacaille, a French astronomer, separated it into the constellations Carina, Puppis, and Vela in the year 1750.

Sir John Herschel suggested the complete dissolution and elimination of Argo Navis in 1841 and 1844. Despite this, the constellation and its component pieces continued to be used well into the 20th century. It was given the three-letter abbreviation Arg in 1922, along with the other constellations. In 1930, when the IAU established the 88 contemporary constellations, Carina, Puppis, and Vela were split up and demoted to a previous constellation.

To learn more about constellation use link below:

https://brainly.com/question/667281

#SPJ4

The correct option is A. Sublimation process amongst the When a solid goes directly to a gas.

Sublimation refers to the process of transforming a substance from its solid state directly into its gaseous state without passing through the intermediate liquid state. This occurs when the pressure of the substance's vapor is higher than the pressure of the surrounding atmosphere.

Sublimation is a physical phenomenon that occurs naturally in a number of substances, such as dry ice (solid carbon dioxide), mothballs (solid naphthalene), and snow (solid water). It is also used in various industrial processes, such as freeze-drying, where substances are dried by freezing them and then removing the ice through sublimation.

In psychology, sublimation refers to the redirection of an individual's impulses or desires into socially acceptable outlets, such as artistic or creative pursuits, instead of expressing them in destructive or harmful ways. Sigmund Freud, the founder of psychoanalysis, believed that sublimation was a healthy and adaptive defense mechanism.

To learn more about Sublimation visit here:

brainly.com/question/29304516

#SPJ4

Answer:

0°

Explanation:

refer to the attachment

hope this helps!

We fear too little for all those events that will claim lives undramatically.

Fear is an extremely unpleasant feeling that occurs when one perceives or recognizes a threat or danger. Fear results in physiological alterations that might result in behavioral responses like mounting an aggressive defence or running away from the threat.

Our physical, emotional, or let us consider psychological health may be at risk. While most of us have particular things that make us fearful, we can learn to be scared of almost anything that are around us.

Cortisol and adrenaline, two stress hormones, are released. Your heart rate and blood pressure rise. Your respiration quickens. Even your blood supply alters; blood actually moves out from your heart and towards your limbs, facilitating the initiation of punches or other physical attacks.

Learn more about fear here:

brainly.com/question/14661399

#SPJ4

If the acceleration of an object is zero, its speed is constant.

In mechanics, acceleration is defined as  the rate of change of the speed of an object regarding time. Basically,acceleration  are considered as vector quantity (in that they have greatness and course). The direction of an object's acceleration is given by the direction of the net power following up on that item.

The magnitude of object's acceleration, as portrayed by Newton's Subsequent Regulation, is the consolidated impact of two causes: the net equilibrium of all outer powers acting onto that item — greatness is straightforwardly corresponding to this net coming about force; that item's mass, contingent upon the materials out of which it is made — extent is contrarily relative to the item's mass.

To know more about acceleration,visit here:

https://brainly.com/question/12550364

#SPJ4

The ball reaches a height of 1.38 m after the third bounce, if it is initially released 4 m from the floor.

What is height?

Height is a measurement of vertical distance or elevation. It is usually defined as the distance from a reference point, such as the ground or sea level, to a point of interest, such as the top of a building, a mountain, or an object. Height can be measured in various units, including meters, feet, and inches.

To find the height of the ball after the third bounce, we can calculate the height of the ball after each bounce and multiply by a factor that takes into account the loss of energy due to heating.

After the first bounce, the ball will lose 31% of its energy, so it will have only 69% of its initial energy. We can calculate the height of the ball after the first bounce by assuming that the ball's potential energy is equal to its initial height multiplied by its weight and subtracting the energy loss due to heating:

PE = mgh

h = PE / (mg)

h = (0.69 * 4 m * 9.8 m/s^2) / (0.06 kg * 9.8 m/s^2) = 2.86 m

After the second bounce, the ball will lose another 31% of its energy, so it will have only 69% of its energy after the first bounce. We can calculate the height of the ball after the second bounce using the same process:

h = (0.69 * 2.86 m * 9.8 m/s^2) / (0.06 kg * 9.8 m/s^2) = 2.01 m

After the third bounce, the ball will lose another 31% of its energy, so it will have only 69% of its energy after the second bounce. We can calculate the height of the ball after the third bounce using the same process:

h = (0.69 * 2.01 m * 9.8 m/s^2) / (0.06 kg * 9.8 m/s^2) = 1.38 m

So, the ball reaches a height of 1.38 m after the third bounce, if it is initially released 4 m from the floor.

TO learn more about heights:

https://brainly.com/question/29134484

#SPJ4

The spring constant k (in lbf /ft) is 248.62 lbf/ft and the natural frequency f (in hz) of the system is 10.54 Hz.

Given the mass of object (m) = 4.7lbm

The elongation in spring (L) = 1.3inches

The spring constant of spring = k

We know that the force exerted on the spring is = F

We determine Fs = kL

The force on object (F) = mg

Fs = F then,

mg = kL such that:

k =  (4.7 lbm * 32.2 ft/s^2) / (1.3 in) where 1 lbm * 32.2 ft/s2 = 1 lbf

k = 248.62 lbf/ft

The frequency of spring = f

f = 1 / (2π * √(m/k))

f = 1 / (2π * √(4.7 lbm / 248.62 lbf/ft))

f = 10.54 Hz

To learn more about spring constant click here https://brainly.com/question/14159361

#SPJ4

The radius of the turn for the falcon flying at 22 m/s is approximately equal to: radius ≈ 5.18 m.

The centripetal acceleration required for a tight circular turn can be calculated using the formula:

centripetal acceleration = velocity² / radius

where velocity is the speed of the falcon and radius is the radius of the turn.

Given that the centripetal acceleration is 1.5 times the free-fall acceleration (g), we can write:

centripetal acceleration = 1.5 × g = 1.5 × 9.8 m/s²

Substituting this value into the above equation and solving for the radius, we get:

radius = velocity² / centripetal acceleration = (22 m/s)² / (1.5 × 9.8 m/s²) = (22²) / (1.5 × 9.8) m.

So the radius of the turn for the falcon flying at 22 m/s is approximately equal to: radius ≈ 5.18 m.

To know more about centripetal acceleration here

https://brainly.com/question/14465119

#SPJ4

Each ball has an electric field surrounding it, and the magnet creates a magnetic field as well.

The area of space surrounding an electrical charges particle or object within which the charged body perceives force is known as the electric field .Examples: -Electric fields are created by charges and their configurations, such as capacitor and battery cells.

Each location in space at which a charge exists in any form can be regarded to have an electric field attached to it. The electrostatic force per mass unit is another name for an electric field. The electric field's equation is stated as E = F / Q.

To know more about electric field visit:

https://brainly.com/question/15800304

#SPJ1

The speed of the astronomical object is moving away from the observer at 261,922,999 m/s or approximately 87.37% of the speed of light and its direction is away from the observer.

The speed of the object can be calculated using the formula for the Doppler shift, which states that the observed wavelength (λ') of an object moving away from an observer is longer than the rest wavelength (λ) by a factor of (c+v)/(c-v), where c is the speed of light and v is the speed of the object.

The formula for the Doppler shift is:

λ' = (c+v)/(c-v) × λ

Where c is the speed of light, v is the speed of the object and λ and λ' are the rest wavelength and observed wavelength, respectively.

Given the rest wavelength of 500 nm and the observed wavelength of 400 nm, we can rearrange the formula to solve for v (speed of the object):

v = c × (λ/λ' - 1)/(λ/λ' + 1)

v = c × (500 nm/400 nm - 1)/(500 nm/400 nm + 1)

Using the value of the speed of light, c = 299792458 m/s, we can calculate the speed of the object as follows:

v = 299792458 m/s × (500 nm/400 nm - 1)/(500 nm/400 nm + 1)

v = 0.87 × 299792458 m/s = 261922999 m/s

Converting the speed in percentage:

261922999 / 299792458 × 100% = 87.37%

So, the speed of the object is 261,922,999 m/s or approximately 87.37% of the speed of light and is moving away from the observer.

To learn more about the speed of light visit: https://brainly.com/question/682762

#SPJ4

If the fringe spacing is 80 cm, the distance between the aerials  is 6.25 meter.

In physics, interference refers to the combined result of two or more wave trains travelling along intersecting or converging trajectories. The result is the result of adding the individual wave amplitudes at each place that is influenced by multiple waves.

Given: wavelength  = 50 mm = 50 × 10⁻⁴  m

the fringe spacing is = 80 cm = 0.80 m.

x = λD/d

d =  λD/x

= 50 × 10⁻⁴ × 1000/0.80 m

= 6.25 meter.

Hence,  the distance between the aerials  is 6.25 meter.

Learn more about interference here:

https://brainly.com/question/16098226

#SPJ1

The parachute takes longer to fall because of greater air resistance describes the time it takes for the parachute to fall.

How does air resistance slow the fall rate of a parachute?

The drag force resists the downward movement of gravity, pushing the parachute back up. As the parachute falls, the drag increases until it just balances out the pull of gravity. At that point, the parachute stops speeding up and begins to fall at a steady speed.

Why does a parachute increase air resistance?

An open parachute increases the cross-sectional area of the falling skydiver and thus increases the amount of air resistance that he encounters (as observed in the animation below). Once the parachute is opened, the air resistance overwhelms the downward force of gravity.

How does air resistance affect fall time?

With air resistance, acceleration throughout a fall gets less than gravity (g) because air resistance affects the movement of the falling object by slowing it down.

To know more about air resistance:

https://brainly.com/question/25748718

#SPJ1

Answer:

Explanation:

Initital velocity = 0

s=1/2*g*[tex]t^{2}[/tex]

4/9 = 1/2*9.8 * [tex]t^{2}[/tex]

[tex]t^{2} =1\\t=1 sec[/tex]

The load indicated by the spring scale is equal to the mass times the acceleration, so the load indicated by the spring scale is 1 kg x 1 m/s2 = 1 kg.

Acceleration is the rate of change of velocity of an object. It is the rate at which something speeds up or slows down, and is usually denoted by the variable 'a'. Acceleration can be positive, negative, or zero. Positive acceleration indicates an increase in velocity while negative acceleration indicates a decrease in velocity. Acceleration can be caused by a variety of external forces, such as gravity, friction, or thrust. It is also related to momentum, as an object with a greater mass will require more force to accelerate. In general, acceleration is measured in meters per second squared (m/s2).

The mass needed to balance the lever scale is equal to the load on the spring scale divided by the acceleration, so the mass needed to balance the lever scale is 1 kg/1 m/s2 = 1 kg.

To learn more about acceleration
https://brainly.com/question/605631
#SPJ4

The ball will be moving at a velocity of 14.0 meters per second when it reaches the bottom of the ramp.

The velocity of the ball at the bottom of the ramp can be determined using the principle of conservation of energy. The potential energy of the ball at the top of the ramp will be converted into kinetic energy as it rolls down the ramp.

Potential energy = mgh

Kinetic energy = (1/2)mv²

At the bottom of the ramp, all of the potential energy has been converted into kinetic energy, so the equation can be written as:

mgh = (1/2)mv²

Solving for v, we have:

v = √(2gh)

where g is the acceleration due to gravity (9.8 m/s²). So, given the height h, we can calculate the velocity of the ball at the bottom of the ramp.

Let's assume the height of the ramp is h = 10 meters. Then, the velocity of the ball at the bottom of the ramp can be calculated as:

v = √(2gh) = √(2 × 9.8 m/s² × 10 m) = √(196 m²/s²) = 14.0 m/s

So, the ball will be moving at 14.0 meters per second when it reaches the bottom of the ramp.

It's important to note that the ball is rolling without slipping, meaning that its velocity is due to both its rotational motion and its translation. The velocity of the center of mass of the ball at the bottom of the ramp will be equal to the calculated velocity.

Learn more about velocity:

brainly.com/question/18084516

#SPJ4

The water that had been contracting as it cooled would start to expand. Option C

We have to note that the liquid that we have inside the thermometer is what we call the thermometric liquid. This is the kind of liquid that would increase in volume or decrease in volume so that the temperature can be measured.

We must note that water has an anomalous behavior and this is one of the reasons that stops water from being used as a thermometric liquid. This is the fact that water would begin to expand at about 4 degrees centigrade.

Learn more about thermometer:https://brainly.com/question/24189042

#SPJ1

When the spring is 0.150 m long, it will have "0.312 J" of stored potential energy.

F = -kx. It gauges the stiffness of the spring. When a spring is stretched or compressed to a length that deviates by an amount x from its equilibrium length, it applies a force F = -kx in the direction of its equilibrium position.

According to the question.

Length, L = 0.115 m

Spring constant, k = 51.0 N/m

Now,

P.Eelastic = 1/2 kx²

P.Eelastic = 1/2 × (0.150 - 0,150)²

P.Eelastic = 0.01225 × 51 /2

P.Eelastic = 0,312J.

To know more about potential energy visit:-

https://brainly.com/question/15115474

#SPJ4

A student's calculation was found to have a 35.5 % error, and his experimental measurement was 15.6 cm. The two true/actual measurements are 24.19 and 11.53.

Let x and y be the two possible real measurements, with x being less than 15.6 and y being more than 15.6.

x + 35.5% of x = 15.6

y-35.5% of y

35.5% as decimal is 0.355

x + 0.355x = 15.6 , and

y - 0.355y = 15.6

Solving

x + 0.355x = 15.6

1.355x = 15.6

x = [tex]\frac{15.6}{1.355}[/tex] = 11.53

Solving

y - 0.355x = 15.6

0.645y=15.6

0.645y = 15.6

y = 24.19

Learn more about measurements

brainly.com/question/4725561

#SPJ4

The average speed ofthe object during the 5.0-second interval is 25m/s.

The average speed of an object is calculated by taking the total distance traveled in a given time interval, and dividing it by the time interval. Average speed is used to measure the speed of a person, vehicle, or object over a given period of time. Average speed can also be used to compare the performance of different vehicles over the same distance.In this case, the object accelerates uniformly from rest to a speed of 50 m/s in 5.0 seconds.

The total distance traveled in this time interval is 250 meters

[tex]50 m/s * 5.0 s = 250 m[/tex]

The average speed of the object during the 5.0-second interval is then [tex]\frac{250 m }{ 5.0 s }= 25 m/s.[/tex]

Therefore,The average speed ofthe object during the 5.0-second interval is 25m/s.

learn more about speed Refer:brainly.com/question/28224010

#SPJ4

The buoyant force acting on the object submerged in mercury is 133,176 V N/m^3.

What is Buoyant force?

The buoyant force is caused by the pressure difference that exists between the top and the bottom of an object immersed in a fluid. The pressure at the bottom of the object is greater than the pressure at the top, due to the weight of the fluid above it. This difference in pressure creates an upward force, which is called the The buoyant force acting on the object submerged in mercury is 133,176 V N/m^3.

Buoyant force = weight of displaced fluid

The weight of the displaced fluid is equal to the density of the fluid times the volume of the displaced fluid times the acceleration due to gravity (9.81 m/s^2).

Let's assume that the object has a volume of V and a weight of W.

Since the object is submerged in mercury, the weight of the displaced mercury is equal to the weight of the object (W), so we can write:

Weight of displaced fluid = W

Density of mercury = 13,600 kg/m^3

Volume of displaced fluid = V

Acceleration due to gravity = 9.81 m/s^2

Therefore, the buoyant force acting on the object is:

Buoyant force = Weight of displaced fluid

= Density of fluid x Volume of displaced fluid x Acceleration due to gravity

= 13,600 kg/m^3 x V x 9.81 m/s^2

= 133,176 V N/m^3

So, the buoyant force acting on the object submerged in mercury is 133,176 V N/m^3.

To learn more about Buoyant force from given link

https://brainly.com/question/28464280

#SPJ4

The location that will have the greatest electric field strength is the surface of the sphere, which is a distance of r away from the center.

This is because the electric field strength is inversely proportional to the square of the distance from the source, so the closer you get to the source, the stronger the electric field will be.

An electric field is an area of influence created by an electric charge, in which electric force is exerted on other charged objects. This electric force is described mathematically by the electric field vector, which specifies the direction and magnitude of the force. Electric fields can be created by stationary charges, or by time-varying magnetic fields. Electric fields can be used to control the motion of charged objects, and are also responsible for many of the phenomena associated with electricity, such as electric potential, capacitance, and electric current.

Learn more about electric field strength:

https://brainly.com/question/26199225

#SPJ4

The absolute temperature is 393 K

Absolute temperature is a temperature scale that starts at absolute zero, which is the temperature at which all matter has zero thermal energy. The most commonly used absolute temperature scale is the Kelvin scale. The conversion from Celsius or Fahrenheit to Kelvin can be done using the following formulas:

Kelvin = Celsius + 273

Here we would have that;

T = 120° Celsius  + 273 = 393 K

This is the absolute temperature that we seek.

Learn more about temperature::https://brainly.com/question/11464844

#SPJ1

The required tangential velocity of the ball with a mass of 0.50 kg rolling in a circle with a radius of 0.75 m and completing a circle in 12 secs is 0.4 m/s.

Any object moving along a circular path has a linear component to its speed called tangential velocity.  When an object moves in a circular path at a distance r from the centre, then the body’s velocity is directed tangentially at any instant. This is termed tangential velocity.

The ball weighs m = 0.50 kg

r = 0.75 m is the radius of the circle

The time is taken by the ball to complete the circle, t = 12 secs

The tangential velocity is given as, v = 2πr/t,

v = 2π × 0.75/12 = 0.4 m/s

Thus, the required tangential velocity of the ball is calculated to be 0.4 m/s.

To know more about velocity:

https://brainly.com/question/15286969

#SPJ4

At the origin, the electric field has a magnitude of [tex]\frac{k\lambda_0}{x_0}[/tex] and is oriented in a positive x-direction.

Coulomb's law may be used to determine the size of the electric field at the origin caused by a continuous line of charge:

[tex]E = \frac{kq}{r^2}[/tex]

Using the superposition principle, the electric field owing to a differential element of charge dq is:

[tex]dE = \frac{k dq} {r^2}[/tex]

Because the differential charge element is proportional to the linear charge density and the differential length, [tex]dq = \lambda_0 dx[/tex]. Because the distance r from the origin to the differential element equals [tex]r = x_0 + x[/tex],

[tex]dE = \frac{k\lambda_0 dx}{(x_0 + x)^2}[/tex]

Integrating this formula from x = 0 to x = infinity yields the total electric field at the origin:

[tex]E = k\lambda_0 \int_{0}^{\infty} \frac{dx}{(x_0 + x)^2}[/tex] from 0 to infinity

Using partial fractions, the integral may be calculated as follows:

[tex]E = \frac{k\lambda_0}{x_0}[/tex]

The linear charge density and the distance x0 from the closest point on the line of charge are both inversely correlated with the electric field at the origin.

Learn more about the electric field at

https://brainly.com/question/15800304

#SPJ4

Answer:

flujo de energia

Explanation: