water flows through a horizontal plastic pipe with a diameter of 0.2 m at a velocity of 9 cm/s. (a) determine the pressure drop per meter of pipe using the moody chart. (b) calculate the power lost to the friction per meter of pipe. assume that the water is at 20oc.

A automobile stopped after driving 50 meters at the a pace of 20 m / sec. Count on the rate of slowing being constant. Us = 0.5 and Uk = 0.03 are indeed the coefficient of friction between the seat and the user.

A force known as friction works between two systems to stop any motion including attempted motion. Its normal force N that has been bringing the systems together has an inverse connection with the simple friction.

Here following is an overview of friction's detrimental effects: Friction among various mechanical parts causes a substantial quantity of heat to be wasted as heat. Since movement is constrained, it takes more energy to go around it. Using a machine when it is making noise is useless and irritating.

To know more about friction visit:

https://brainly.com/question/13000653

#SPJ4

80%  is the appliance's efficiency

Why do appliances use less energy?

Among the several advantages of energy efficiency are: Environmental: Greater efficiency can reduce water use, greenhouse gas (GHG) emissions, and other pollutants. Economic benefits of energy efficiency improvements include reduced utility costs, job growth, and reduced price fluctuation of power.

Utilizing the formula below, efficiency may be represented as a ratio: Output ÷ Input. The total amount of beneficial work accomplished, excluding waste and spoilage, is known as output or work output. Efficiency can also be expressed as a percentage by dividing the ratio by 100.

Efficiency will be 4/5 *100 i.e. 80%

To learn more about efficiency use link below:

https://brainly.com/question/3617034

#SPJ4

In order to determine the maximum lamp mass, we therefore convert the maximum tension cable value to 400N, and the cord type DE is discovered.Therefore, 20.387 kg is the maximal mass of the lamp at F.

Reason: To locate the maximum, you must identify the point at which the graph turns from growing to decreasing.We check at the derivative and see when the changing the ways from positive to negative to determine the rate at which the graph goes from increasing to decreasing.

For a body, mass is constant.Mass can be calculated using the formula: mass = volume density.A mass's weight is a measurement of a gravitational force at work on it.The kilogram is indeed the SI mass unit.

To know more about  tension cable visit:

https://brainly.com/question/29466701

#SPJ4

Laboratory equipment with a high level of sensitivity, analytical balances are used to precisely measure mass. Their readability ranges from 0.01 mg to 0.10 mg.

What is the analytical balance's sensitivity to top loading?

Top-loading balances are less expensive than analytical balances but are less precise because they can only weigh things up to 200 g. With a readability of up to three decimal places to the right of the decimal point, they are regarded as semi-analytical balances (up to . 001 g). The readability of precision balances is 0.01 g.

The weighing chamber or draft shield on analytical scales protects the incredibly small samples from being impacted by air currents. The "magnetic force restoration" theory underlies the operation of analytical balance. It is an electromagnetic balance that calculates an object's mass using an electromagnet.

To learn more about analytic scales use link below:

https://brainly.com/question/14293926

#SPJ1

(b) start from zero and increase continuously.In free fall motion,speed of the object increases continuously due to gravitational acceleration (g),till the terminal speed.

Newton's First of Motion, often known as the Law of Inertia, states that if an object experiences no net force at all, it will likewise experience no acceleration.Zero acceleration describes an item at rest.An object experiences zero acceleration if it keeps moving in a straight path at a constant speed.

The displacement of a moving body with the identical initial and terminal points is zero, but the distance traveled is not.As a result, it possesses a non-zero speed and zero velocity.

To know more about gravitational acceleration visit:

https://brainly.com/question/13769294

#SPJ4

Complete Question: Large sections of the Earth's crust called tectonic plates move slowly. How long, in meters, does one of these plates go if its average speed is 3.4 cm/year and it keeps moving at that rate for 1.0 second?

The distance moved by the plate in this case would be [tex]1.08 * 10^-10 m/s * 1.0 s = 1.08 * 10^-10 m.[/tex]

The speed of tectonic plates is measured in centimeters per year (cm/yr), but to find the distance moved in meters, we need to convert the speed to meters per second (m/s). To do this, we first convert the speed to meters per year (m/yr) and then divide by the number of seconds in a year (31,536,000 s/yr).

The average speed of the tectonic plate is 3.4 cm/yr, so the equivalent speed in meters per year is 3.4 cm/yr * 0.01 m/cm = 0.034 m/yr. The speed in meters per second is then 0.034 m/yr / (31,536,000 s/yr) = 1.08 x 10^-10 m/s.

If the plate maintains this speed for 1.0 s, the distance it moves can be calculated using the formula distance = speed x time. The distance moved by the plate in this case would be [tex]1.08 * 10^-10 m/s * 1.0 s = 1.08 * 10^-10 m.[/tex]

This distance may seem small, but it is important to remember that tectonic plates move slowly over long periods of time.

Learn more about tectonic plates here:

https://brainly.com/question/4554557

#SPJ4

No, it doesn't always imply that the wall is charged because the ball can cling to a non-charged wall.

The effect is caused by static electricity where we have plastic balloons. Static electricity refers to the buildup of electric charge in an item. Static electricity is significant because it may cause items to cling to one another.

This happens when two items with opposing charges, positive and negative, attract one other. Wool is a conductive substance, which means it quickly absorbs electrons as we discuss our dilemma. As a result, pressing a balloon against a wall causes electrons to move from the wool to the balloon's surface.

The rubbed area of the balloon is now negatively charged. Rubber things, such as the balloon, are electrical insulators, which means they hinder the flow of electrical charge through them.

Learn more about Wall here:

https://brainly.com/question/19623334

#SPJ4

The divers going when they hit the water at 23.1m/s speed

How does air resistance function?

Air exerts a force known as air resistance. When an object is travelling through the air, the force works in the opposite direction. While a sports vehicle with a streamlined design will encounter reduced air resistance and experience less drag, the automobile will be able to move more quickly than a truck with a flat front.

The law of conservation of energy allows us to calculate the speed of the divers when they strike the ground because their potential energy at a height of 28.7 meters above the ground is transformed into kinetic energy at ground level.

Potential Energy =Kinetic Energy

PE=KE

mgh = 1/2mv²

gh = 1/2v²

g = 9.81m/s²

v = √2gh

v = √2 × 9.81 ×2 × 28.7

v = 23.1 m/s

To learn more about energy use link below:

https://brainly.com/question/13881533

#SPJ4

True. The heat flux is independently of x for only one steady-state conduction in some kind of a planar wall without heat creation.

The thermal energy that is emitted over a concrete surface is known as heat flux, and its unit is W/m2. The equation dotq = fracQA can be used to determine heat flow.

The source of energy flux at the surface of a hard object is frequently a combination of convective and contributions. By allowing this heat to pass throughout a heat flux sensor, conductive and convective heat fluxes can be monitored. Heat flux monitors are either embedded in or installed on the surface of an solid item.

To know more about heat flux visit:

https://brainly.com/question/8206631

#SPJ4

Blessed are the merciful: for they shall obtain mercy is the moral lesson learned from the sermon on the mount​

What is the Sermon on the Mount's main message?

Christians learn the following crucial lessons from this sermon: The things we own here on Earth don't matter. Good people will discover meaningful spiritual "treasures" in Heaven. God will take care of people, so they shouldn't be concerned.

In the Sermon on the Mount, what did Jesus say?

1. And, seeing the crowds, he climbed a mountain: His disciples came to him after he was set.

2. And he spoke to them, saying

3. Because the kingdom of heaven is theirs, those who are poor in spirit are blessed.

4. Happy are the bereaved because they will find comfort.

Who wrote the sermon on the Mount?

Scholars put forth a number of arguments for the claim that Matthew is the author of the Sermon on the Mount, but only using New Testament sources.

To know more about the sermon on the Mount:

https://brainly.com/question/1069525

#SPJ1

Answer:

Explanation:

v=u+at

Final velocity v=0 , u=35m.s, a=-a , t=0.02

a=u/t = 35/0.02 = 1750 m/s2

force = mass * acceleration = 0.15 * 1750 = 262.5N

the attraction between a +3 valence cation and a -2 valence anion, whose centres are separated by a distance of 2.8 nm. The attraction between two cations is 1.76×10⁻¹⁰ forces.

given,

number of cations,n₁=3

number of anions,n₂=2

center distance between cation and anion,r=2.8 nm=2.8×10⁻⁹m

write the equation force of attraction:

[tex]F=\dfrac{kq_1q_2}{r^2}.[/tex]..............(1)

Here,K is coulombs constant ,K=9×10⁹ Nm²/C²,q =n×e ,e is electronic charge,e=1.60×10⁻¹⁹ coulombs. the attraction between a +3 valence cation.

calculate the value of cation charge q₁

q₁=n₁×e

q₁=3×1.60×10⁻¹⁹

calculate the value of cation charge q₂

q₂=n₂×e

q₂=2×1.60×10⁻¹⁹

substitute the values in equation 1

[tex]F=\frac{(9*10^{9})*(3*1.602*10^{-19}) *(2*1.602*10^{-19} )}{(2.8*10^{-9})^{2} }[/tex]

F=1.76×10⁻¹⁰

The force of attraction between cation is 1.76×10⁻¹⁰.

Learn more about valence here:

https://brainly.com/question/3527118

#SPJ4

The current flowing in the circuit is 4 A.

The current flowing in the circuit is the rate of flow of charges per second.

The magnitude of the current flowing in the circuit can be calculated by applying Ohm's law as shown below.

V = IR

where;

The magnitude of the current is calculated as;

I = V/ R

I = 16 V / 4 ohms

I = 4 A

Learn more about current here: https://brainly.com/question/24858512

#SPJ1

The height of a volcano can reach a maximum of 0.3 times that of Earth, and boulders will float in the air for 0.38 times as long as they did on Earth.

a) When rocks are ejected from a volcano, their initial velocity (V) and the acceleration due to gravity (G) dictate how high they may go (g).

The equation for the greatest height (h) is given by h = V2/. (2g). Gravitational acceleration is 9.8 m/s2 on Earth and 3.71 m/s2 on Mars.

With the same beginning velocity as on Earth, boulders blasted from a volcano on Mars would reach a height of h = V2/(2 * 3.71) = (V2/7.42) m.

On Earth, the maximum height would be 1/7.32 times 1/2.72 times 0.37 times H.

(b) The equation T M = 2V/g may be used to calculate how long the pebbles will remain in the air on Mars (T M).

The equation is T E = 2V/9.8 on Earth and T M = 2V/3.71 on Mars. T M/T E = (2V/3.71) / (2V/9.8) = 3.71/9.8 = 0.38 gives the ratio of the time in the air on Mars to that on Earth.

In other words, the rocks will remain in the air for around 0.38 times as long as they were on earth.

Learn more about height here:

brainly.com/question/16047812

#SPJ4

The piano exerts a force of 249 N to the north on the mover.

The force the piano exerts on the mover is equal in magnitude but opposite in direction to the force the mover exerts on the piano. This is because of Newton's Third Law of Motion, which states that for every action, there is an equal and opposite reaction.

The force the piano exerts on the mover is 249 N to the north, since it is opposite in direction to the force the mover exerts on the piano, which is 249 N to the south.

So, the force the piano exerts on the mover is 249 N to the north.

To summarize, the mover weighing 847 N is pushing the piano weighing 2145 N down a hallway, and the force the mover exerts on the piano is 249 N south. According to Newton's Third Law of Motion, the piano must exert an equal and opposite force on the mover. Thus, the piano exerts a force of 249 N to the north on the mover.

Learn more about force:

brainly.com/question/13191643

#SPJ4

Centripetal force is equal to mv2/r for the youngster about 0.5 meters from the center. Due to the fact that more ground is traversed in a given  has a higher moving direction than the youngster closest to the edge.

The youngster on the joyful is moving in a uniform circular motion, which means that while the child's overall speed is constant, its direction is changing at each point. A change in magnitude, direction, or both can cause a change in velocity. When there is an rate of alteration in velocity, acceleration takes place.

The magnitude of an object's centripetal acceleration (a) when it performs a uniform motion as a result, the mass of the object has no bearing on the centripetal acceleration.

To know more about force visit :

https://brainly.com/question/1991020

#SPJ4

The planet experience an increase in speed for at least a moment as it approaches the sun.

The three laws of Kepler are -

Given is the planet in the orbit shown in the drawing obeys Kepler's laws.

Therefore, the planet experience an increase in speed for at least a moment as it approaches the sun.

To solve more questions on Kepler's laws, visit the link below -

brainly.com/question/25384702

#SPJ1

The displacement of the car is 180 m it traveled.

Displacement is the distance between two points in a certain direction. It is usually measured in terms of length, such as kilometers or miles. Displacement is a vector quantity, which means that it has both magnitude and direction. It is different from distance because displacement is the shortest distance between two points, while distance is the total amount of space traveled between two points. Displacement is commonly used in physics to calculate the change in position of an object over time. It can also be used to measure the change in velocity or acceleration of an object.

To learn more about displacement

https://brainly.com/question/7959057

#SPJ1

Using an electron beam that has been accelerated through a 30 kv potential difference, a scanning electron microscope creates an image at a speed of 0.012 1023 m.

Difference that might exist between any two points The amount of work required to move a unit positive charge along any path from one point to another without accelerating is referred to as the electric field.

Accelerating voltage=V=30kV

Using de-Broglie's equation.

 λ= p/h ⟶(1)

λ=Wavelength of moving particle.

P=Momentum of moving particle.

h=Planck's constant=6.63×10⁻³ Js

now from mechanics we know,

P= √2mk = √2mqV

​Where, P=momentum of particle

M=mass of particle.

K=Kinetic energy of particle.

V= Electric potential of particle( Accelerating voltage).

q=charge of particle.

In the case of electron, q=e=1.6×10⁻¹⁹ C

Substitution of   (1)

λ= √2meV/h

​λ = 6.63 × 10⁻³⁴/√2 × 9.1 × 10⁻³¹ × 1.6 × 10¹⁹ × 30 × 10³

λ = 6.63 × 10⁻³⁴/546 × 10⁻⁹

λ = 0.012 × 10⁻²³m

To know more about potential difference visit:-

https://brainly.com/question/12198573

#SPJ4

The mass of the ultrasonic transducer used in a medical ultrasound imaging device is 0.10 g and it is driven back and forth in simple harmonic motion (SHM) at 1.0 MHz. The frequency of 1.0 MHz means that the disk oscillates back and forth 1 million times per second. The disk's oscillations in SHM are crucial to the functioning of the medical ultrasound imaging device.

In a medical ultrasound imaging device, the transducer sends and receives high-frequency sound waves that are used to create images of internal organs, tissues, and blood flow. The motion of the transducer disk creates these sound waves, which then bounce off internal structures and return to the transducer, allowing for the creation of an image. The thin disk design of the transducer allows for a high frequency of oscillation, which results in higher-resolution images.

The ultrasonic transducer plays a critical role in the functioning of a medical ultrasound imaging device and the high frequency of oscillation it generates is key to producing high-quality images. This information is important to understand the functioning of the medical ultrasound imaging device and how the ultrasonic transducer contributes to the quality of the images produced.

Learn more about transducer

brainly.com/question/13103015

#SPJ4

The length of the vibrating section of the violin string is approximately 16 cm.

The length of the vibrating section of the violin string can be calculated using the formula for the wavelength of a wave on a string:

λ = 2L / n

where λ is the wavelength, L is the length of the vibrating section of the string, and n is the number of nodes in the vibration.

Next, we can use the formula for the frequency of a wave on a string:

[tex]f = (1 / 2L) * (T / μ)^0.5[/tex]

where f is the frequency, T is the tension in the string, and μ is the linear density of the string.

Combining these two equations and solving for L, we get:

[tex]L = (μ / T) * (f^2 / n^2)[/tex]

Substituting the given values, we get:

[tex]L = (0.690 g/m / 160 N) * [(344 m/s / (2 * 39.1 cm))^2 / (1 / 2)^2][/tex]

Converting the units, we get:

[tex]L = (0.690 g/m / 160 N) * [(344 m/s / (2 * 0.391 m))^2 / (1 / 2)^2][/tex]

Calculating the value, we get:

L = 0.016 m

So, the length of the vibrating section of the violin string is approximately 16 cm.

Learn more about wavelength here

https://brainly.com/question/29398067

#SPJ4

A obtained experimental is indeed a long, narrow chunk of stone that is extracted by drilling a hole through a rock with such a unique tool and lifting out an undamaged piece of the rock.

Work is being done on the thing as you lift it. The equation W = Fd describes the work W performed on an item by a constant force. It is determined by multiplying the force's intensity by how far the object is moved by the force.

Surface and body are no longer in contact when the body is lifted, eliminating any frictional forces. For the simple reason that friction opposes any relative motion between a surface and a substance (both are in contact).

To know more about lifting visit:

https://brainly.com/question/20068146

#SPJ1

The Gaussian surface through which the total electric flux is zero is the one that does not enclose any net charge.

According to Gauss's Law, the total electric flux passing through a closed surface is proportional to the charge enclosed by that surface. If there is no charge enclosed by the surface, then the total electric flux passing through that surface is zero.

Therefore, if there is no charge enclosed by a Gaussian surface, the total electric flux passing through that surface is zero.

However, if there is a charge enclosed by a Gaussian surface, the total electric flux passing through that surface is not necessarily zero. In that case, the total electric flux passing through the surface is proportional to the charge enclosed by the surface.

For more similar questions on flux:

brainly.com/question/12017456

#SPJ11

The 50 N weight must be placed 1.32 m from the center on the opposite side to balance the 100 N bucket.

The formula to find the distance, d, from the center that a weight must be placed to balance a weight placed a distance, x, from the center is:

Where:

In this case:

Plugging these values into the formula, we find:

Hence, in order to balance the 100 N bucket, the 50 N weight must be positioned 1.32 m from the center on the opposite side.

Learn more about balanced a center brainly.com/question/15244810

#SPJ4

If the centripetal force on a 3.30 kg object is 14.5 N, and the object is 1.90 m from the center of the circle, then the tangential velocity of the object will be 7.50 m/s.

Weight of the object is 3.30 kg ⇒ m = 3.30 kg.

The object is placed 1.90 meter away from the center of the circle and the centripetal force acting on the object will be 14.5 N .

F = 14.5 N  and r = 1.90 m.

Centripetal force will be F = m × a = m × v² / r

So, v = sqrt of (F × r / m)

⇒ sqrt (14.5 N × 1.90 m / 3.30 kg) = sqrt (51.85 N × m / kg) = sqrt (51.85 N × m / kg) = 7.50 m/s.

Then the tangential velocity of the object will be 7.50 m/s.

Learn more about tangential velocity:

https://brainly.com/question/28738284

#SPJ4

The warning advises against heating the can because if the can is heated, the pressure inside it can increase, causing it to burst and potentially causing injury.

Heating the can cause the pressure inside it to increase, leading to a dangerous and potentially explosive situation. This is because the aerosol can contains a mixture of ingredients that are pressurized, including a volatile propellant, the sunblock product, and possibly other chemicals.

When the can is heated, the pressure inside it can rise to a level that exceeds the strength of the can, causing it to burst. This can release the contents of the can rapidly and forcefully, posing a risk of injury to anyone nearby. Therefore, it's important to avoid heating the can and to handle it with care, following the manufacturer's instructions and warnings.

To learn more about aerosol visit: https://brainly.com/question/26123728

#SPJ4

Television broadcasts utilize radio waves to transmit signals from the broadcaster to the television set.

The signals contain data, including audio and video, which is decoded and shown on the screen. The electromagnetic spectrum, which also contains visible light and X-rays, includes radio waves. These waves can move across a variety of media, including air, water, and even space, and have varying frequencies.

Since the early 20th century, radio waves have been used to broadcast television, becoming a standard in homes all over the world. Over time, technological advancements have improved picture and sound quality and increased the number of available channels. In the worlds of communication and entertainment, television transmissions and radio waves have, in short, had a long and significant association.

Read more about Radio waves:

https://brainly.com/question/69373

#SPJ4

The object that has potential energy is the can of gasoline.

Potential energy is described as the energy held by an object because of its position relative to other objects, stresses within itself, its electric charge, or other factors.

The forms of potential energy includes:

Potential energy is described as the energy a system has due to position, shape, or configuration.

Learn more about potential energy at: https://brainly.com/question/1242059

#SPJ1