Volume is the
variable, and the
temperature of the gas is the
variable.
DONE

Answer:

The correct answer to the following question will be "1.76 g/L".

Explanation:

The given values are:

P₁ = 15 kPa

Solubility of water, C₁ = 0.66 g/L

P₂ = 40.0 kPa

C₂ = ?

Now,

According to Henry's Law,

⇒  [tex]\frac{P_{1}}{P_{2}}=\frac{C_{1}}{C_{2}}[/tex]

⇒  [tex]C_{2}=\frac{C_{1}\times P_{2}}{P_{1}}[/tex]

On putting the estimated values, we get

⇒       [tex]=\frac{0.66\times 40}{15}[/tex]

⇒       [tex]=\frac{26.4}{15}[/tex]

⇒       [tex]=1.76 \ g/L[/tex]

Answer:

fluoride ion

Explanation:

If atoms gain electrons, they become negative ions, or anions. Consider the example of fluorine (see Figure below). A fluorine atom has nine protons and nine electrons, so it is electrically neutral. If a fluorine atom gains an electron, it becomes a fluoride ion with an electric charge of -1.

hope that helps!

When a fluorine atom will gain electrons then it will form an anion,[tex]F^{-}[/tex].

An ion having a negative charge, or one with more electrons than protons, is referred to as an anion. When an element acquires one or even more electrons, anion formation was observed.

The smallest component of ordinary stuff that makes up a chemical element is just an atom.

Atoms generate negative ions, or anions when they gain electrons.  A fluorine atom is generally electrically neutral since it possesses nine protons as well as nine electrons. Gaining an electron causes a fluorine atom to will have to become a fluoride ion, which has an electric charge of such -1.

To know more about the atom and anion

https://brainly.com/question/15578817

#SPJ2

Answer:

(1) the surface area of the solute,

(2) the temperature of the solvent,

(3) the amount of agitation that occurs when the solute and the solvent are mixed.

Explanation:

Answer:

Natural gas is an odorless, gaseous mixture of hydrocarbons—predominantly made up of methane (CH4). It accounts for about 30% of the energy used in the United States. About 40% of the fuel goes to electric power production and the remaining is split between residential and commercial uses, such as heating and cooking, and industrial uses. Although natural gas is a proven, reliable alternative fuel that has long been used to power natural gas vehicles, only about two-tenths of 1% is used for transportation fuel.

The vast majority of natural gas in the United States is considered a fossil fuel because it is made from sources formed over millions of years by the action of heat and pressure on organic materials. Alternatively, renewable natural gas (RNG), also known as biomethane, is a pipeline-quality vehicle fuel produced from organic materials—such as waste from landfills and livestock—through anaerobic digestion. RNG qualifies as an advanced biofuel under the Renewable Fuel Standard.

Because RNG is chemically identical to fossil-derived conventional natural gas, it can use the existing natural gas distribution system and must be compressed or liquefied for use in vehicles.

CNG and LNG as Alternative Transportation Fuels

Two forms of natural gas are currently used in vehicles: compressed natural gas (CNG) and liquefied natural gas (LNG). Both are domestically produced, relatively low priced, and commercially available. Considered alternative fuels under the Energy Policy Act of 1992, CNG and LNG are sold in units of gasoline or diesel gallon equivalents (GGEs or DGEs) based on the energy content of a gallon of gasoline or diesel fuel.

Compressed Natural Gas

CNG is produced by compressing natural gas to less than 1% of its volume at standard atmospheric pressure. To provide adequate driving range, CNG is stored onboard a vehicle in a compressed gaseous state at a pressure of up to 3,600 pounds per square inch.

CNG is used in light-, medium-, and heavy-duty applications. A CNG-powered vehicle gets about the same fuel economy as a conventional gasoline vehicle on a GGE basis. One GGE equals about 5.66 pounds of CNG.

Liquefied Natural Gas

LNG is natural gas in its liquid form. LNG is produced by purifying natural gas and super-cooling it to -260°F to turn it into a liquid. During the process known as liquefaction, natural gas is cooled below its boiling point, removing most of the extraneous compounds found in the fuel. The remaining natural gas is primarily methane with small amounts of other hydrocarbons.

Because of LNG's relatively high production cost, as well as the need to store it in expensive cryogenic tanks, the fuel's widespread use in commercial applications has been limited. LNG must be kept at cold temperatures and is stored in double-walled, vacuum-insulated pressure vessels. LNG is suitable for trucks that require longer ranges because liquid is denser than gas and, therefore, more energy can be stored by volume. LNG is typically used in medium- and heavy-duty vehicles. One GGE equals about 1.5 gallons of LNG.

Answer:

49.35  mL

Explanation:

Given: 56.2 mL of gas

To find: volume that 56.2 mL of gas at 820 mm of Hg would occupy at 720 mm of Hg

Solution:

At 820 mm of Hg, volume of gas is 56.2 mL

At 1 mm of Hg, volume of gas is [tex]\frac{56.2}{820}[/tex]

At 720 mm of Hg, volume of gas is [tex]\frac{56.2}{820}(720)=49.35\,\,mL[/tex]

Answer:

The answer is 2.660 mol/l

Explanation:

Given: n= 0.0665, v= 25.00ml

Required: C

C (molarity)= n (of solute)/ v (of solvent) [ standard unit: mol/l]

First convert volume of solvent in its standard unit, i.e. litres(L)

v= 25.00ml/1000= 0.02500L

C = 0.0665 mol / 0.02500 L= 2.660 mL (In proper significant digits i.e. 4 sigdigs)

Therefore, The molarity of the sulfuric acid is 2.660 mol/L :)

Answer:

uuuh 4.25191 × 10-21 grams????

Explanation:

Answer:

11.54

Explanation:

-log(3.50*10^-3) = 2.46 pOH

pH = 14 - pOH

pH = 11.54

Answer:

The mass is converted to energy to cause the mushroom cloud you woud see

Explanation:

Answer:

2.843 M

Explanation:

Molarity = moles / volume

Milliliters to liters:

500 mL = .500 L

Grams to moles:

MgO molar mass = 16.00 + 24.31 = 40.31 g/mol

57.3 g x 1 mol / 40.31 g = 1.421 mol

Molarity:

1.421 mol / .500 L =  2.843 M

Answer:

The new volume of the gas is 29.57 Liters

Explanation:

Given;

initial pressure of gas, P₁ =  12 atm

initial volume of gas, V₁ = 23 Liters

initial temperature of gas, T₁ = 200 K

final pressure of gas, P₂ =  14 atm

final temperature of gas, T₂ = 300 K

final volume of gas, V₂ = ?

To determine the final volume of the gas, we apply general gas law;

[tex]\frac{P_1V_1}{T_1} = \frac{P_2V_2}{T_2}\\\\V_2 = \frac{P_1V_1T_2}{T_1P_2}\\\\V_2 = \frac{12*23*300}{200*14}\\\\V_2 = 29.57 \ Liters[/tex]

Therefore, the new volume of the gas is 29.57 Liters

Answer:

Is the shampoo basic or acidic in nature? How can you know?

The shampoo by nature is of basic pH.

Explanation:

Since the basic shampoo weakens the hair by breaking the disulfide bonds of the keratin of the hair, it is sought to slightly acidify adding small flakes of various materials, for example, glycol distearate.  

The shampoos hardly have the pH indicated, the most common is to see shampoo with balanced or neutral pH (pH 7). To know the pH of the shampoo you can buy pH measuring strips. A pH between 5.5 and 7 is correct.

Answer:

helix

sugar-phosphate

four nitrogen bases that are adenine, thymine, guanine, cytosine

The shape of the DNA molecule is called a double helix. The backbone of DNA is made of sugar-phosphate molecules and phosphate molecules.

Deoxyribonucleic acid, or DNA, is an organic molecule with a complicated molecular architecture that is present in all prokaryotic or eukaryotic cells, as well as in a variety of viruses. For the transfer of inherited traits, DNA codes genetic information. Despite the fact that the molecule DNA was initially identified in 1869, its significance for inherited characteristics was not shown until 1943.

James Watson and Francis Crick discovered that the structure of DNA consists of a double-helix polymer, a spiral made up of two DNA strands twisted around each other. The shape of the DNA molecule is called a double helix. The backbone of DNA is made of sugar-phosphate molecules and phosphate molecules. The "rungs" of DNA are made of four nitrogen bases that are adenine, thymine, guanine, cytosine.

Therefore, the shape of the DNA molecule is called a double helix. The backbone of DNA is made of sugar-phosphate molecules and phosphate molecules.

To know more about DNA, here:

https://brainly.com/question/21992450

#SPJ2

Answer:

1002

Explanation:

[tex]C_{2n}[/tex][tex]H_{2n+2}[/tex]

500 multiply by 2 add 2

The chemical formula of an alkane with 500 carbons is C₅₀₀H₁₀₀₂ as the general formula of alkanes is C[tex]_n[/tex]H[tex]_2n[/tex][tex]_+2[/tex].

Chemical  formula is a way of representing the number of atoms present in a compound or molecule.It is written with the help of symbols  of elements. It also makes use of brackets and subscripts.

Subscripts are used to denote number of atoms of each element and brackets indicate presence of group of atoms. Chemical formula does not contain words. Chemical formula in the simplest form  is called empirical formula.

It is not the same as structural formula and does not have any information regarding structure.It does not provide any information regarding structure of molecule as obtained in structural formula.

There are four types of chemical formula:

1)empirical formula

2) structural formula

3)condensed formula

4)molecular formula

Learn more about chemical formula,here:

https://brainly.com/question/29031056

#SPJ3

Answer:

317 g

Explanation:

Cu + 2HCl --> CuCl2 +H2

1      :     2           1 : 1

1 mole of Cu  = 63.5 g

1 mole of  H2 = 2g

1 mole  Cu produces = 1 mole of H2

63.5 g of Cu produces = 2 g of H2

So

10 g of H2 will be produced from =  (63.5/2)*10 = 317 g of Copper

Answer:

Its b its the state not anything else

A physical change has occurred has occurred when evaporating water producing gaseous water as a  physical change  results in a phase change, not a change in composition.

Physical changes are defined as changes which affect only the form of a substance but not it's chemical composition. They are used to separate mixtures in to chemical components but cannot be used to separate compounds to simpler compounds.

Physical changes are always reversible using physical means and involve a change in the physical properties.Examples of physical changes include melting,boiling , change in texture, size,color,volume and density.Magnetism, crystallization, formation of alloys are all reversible and hence physical changes.

They involve only rearrangement of atoms and are often characterized to be changes which are reversible.

Learn more about physical changes,here:

https://brainly.com/question/17931044

#SPJ2

Answer:

Electron microscopy and scanning tunneling microscopes contributed to the understanding of atoms in understanding atomic structure.

The electron microscope has magnifications of about 100,000x.

This helped the scientists to have accurate image groupings of the atoms. Scanning tunnel microscope helped scientists to have the images of groups of atoms.

Answer:

ecosystem

Explanation:

An ecosystem includes all of the living things (plants, animals and organisms) in a given area, interacting with each other, and also with their non-living environments (weather, earth, sun, soil, climate, atmosphere). The living and nonliving components of the ecosystem are linked together through nutrient cycles and energy flows. Ecosystems are of any size, but usually they are in particular places.

In an ecosystem, plants depend on the soil for nutrients. These nutrients are cycled in nature by the various biogeochemical cycles within the ecosystem. The ecosystem is a self sustaining unit in terms of materials and energy flow.

Answer:

D. ecosystem

Explanation:

An ecosystem is a large community of living organisms (plants, animals and microbes) in a particular area. The living and physical components are linked together through nutrient cycles and energy flows.

In an ecosystem there is symbiotic relationship which entails each living organism contributes to the well being of the other and the entire population.

Answer:

Is an absolute temperature scale with zero at absolute zero

Answer:  [tex]2H_2O[/tex] is a product found in the chemical equation

Explanation:

The given balanced chemical equation is as follows:

[tex]CH_3SH+4O_2\rightarrow CO_2+SO_2+2H_2O[/tex]

A chemical reaction is represented by writing the chemical formula of the reactants on the left side of the arrow and the products on the right side of the arrow.

Here 1 mole of [tex]CH_3SH[/tex] and 4 moles of [tex]O_2[/tex] are the reactants and 1 mole of [tex]CO_2[/tex] , 1 mole of [tex]SO_2[/tex] and 2 moles of [tex]H_2O[/tex] are the products.

Thus from the given options, [tex]2H_2O[/tex] are products

Answer:

The Force of Gravity  force between each planet and the Sun keeps the planets in orbit around the Sun.

Explanation:

Answer:

yes

Explanation:

Two covalent bonds form between the two oxygen atoms because oxygen requires two shared electrons to fill its outermost shell.

Answer:

The skeletal muscle tissue is found in biceps.

=> Option B is correct

Hope this helps!

:)

There are different types of muscles namely smooth muscles, skeletal muscles, non-striated muscles etc. Biceps brachii is classified as skeletal muscles.

Skeletal muscles are controlled by the somatic nervous system and are voluntary muscles. The other types of muscle include smooth muscle, which is non-striated, and cardiac muscle, both of which are striated. These two types are both considered to be involuntary, or under the direction of the autonomic nervous system.

The biceps brachii commonly know as the biceps, is a large, thick muscle on the ventral portion of the upper arm. The muscle is composed of a short head and a long head. The long head is located on the lateral side of the biceps brachii while the short head is located on the medial side[1].

The biceps brachii works across three joints, and is able to generate movements in glenohumeral, elbow and radio-ulnar joints.

To find more skeletal muscles, refer here:

https://brainly.com/question/1194286

#SPJ5

Answer:

Chemical potential energy is a form of potential energy related to the structural arrangement of atoms or molecules. This arrangement may be the result of chemical bonds within a molecule or otherwise. Chemical energy of a chemical substance can be transformed to other forms of energy by a chemical reaction.

The chemical energy and nuclear energy can be considered potential energy because both of them has energy stored in it.

Potential energy is any form of energy that has stored potential that can be put to future use such as nuclear energy, chemical energy in which the energy is stored in it so we can conclude that chemical energy and nuclear energy can be considered potential energy due to its storage of energy.

Learn more about potential energy here: https://brainly.com/question/14427111

Answer:

When water changes to a solid or gas, it's said that water changes to a different state of matter

Explanation:

Even when water physical form changes, the molecules stay the same. Water's molecules contains two hydrogen atoms that is bonded with one oxygen atom.

Answer:

0.25 M

Explanation:

The first step is to determine how many moles of glucose there are, which means first finding out the molar mass of glucose. Carbon has a molar mass of about 12, hydrogen 1, and oxygen 16, so the total molar mass of glucose is about 6(12)+12(1)+6(16)=180 grams. This means that 90 grams is half a mole. Half a mole of substance divided by two liters of solution is (1/2)/2=1/4, or a molarity of 0.25. Hope this helps!

Answer:

A:force times an object displacement

Explanation: