vector → has a magnitude of 25 units and makes 20° with the x-axis. vector → has a magnitude of 20 units and makes 60° with the x-axis. what is the magnitude of the vector → →?

To calculate the gravitational force of an object mass of two objects and the distance between the object.

What is Gravitational Constant?

The gravitational constant, abbreviated G, is an empirical physical constant used in the calculation of gravitational effects in both Albert Einstein's theory of general relativity and Sir Isaac Newton's law of universal gravitation.

The gravitational force is one of the different types of forces in physics. It is a force that draws any two mass-containing objects together. Due to the fact that it always draws the masses of two objects together, the gravitational force is also referred to as the attractive force. According to Newton's law of gravitation, every object in the universe is attracted to other objects. Strong, weak, electromagnetic, and other types of forces are among the others.

Gravitational Force = (Gravitational Constant × Mass of first object × Mass of the second object) / (Distance between the centre of two bodies)2

The unit of gravitational force is newton.

To learn more about force, click on the below link:

https://brainly.com/question/29229499

#SPJ4

Negatively charged particles found in shells around the nucleus of a particular atom are called electrons.

Electrons are subatomic particles that have a negative charge, and they are found in the electron shells surrounding the nucleus of an atom. The number of electrons in an atom is equal to the number of protons in the nucleus, which helps to keep the atom electrically neutral. Electrons are responsible for many of the properties of atoms, including chemical reactivity.

Learn more about electrons at: https://brainly.com/question/371590

#SPJ4

The stop signs are 210m apart.

What is the meaning of acceleration?

The rate at which velocity changes is called acceleration. Acceleration typically indicates a change in speed, but not necessarily. An item that follows a circular course while maintaining a constant speed is still moving forward because the direction of its motion is shifting.

The three different types of accelerated motions are uniform acceleration, non-uniform acceleration, and average acceleration. The motion in which an item moves in a straight line while increasing in velocity at regular intervals is referred to as uniform acceleration.

s =  1/2 a1 t1^2 +a1 t1 t2 +(a1 t1)^2/a2 - a2/2(a1 t1/a2)^2

a1 = 4.2m/s2

t1 =  6.8s

t2 = 2.1s

a2 = 3.1m/s2

s = 1/2*4.2*6.8 + 4.2*6.8*2.1 +(4.2*6.8)^2/3.1 - 3.1/2 (4.2*6.8/3.1)^2

s = 14.28+ 59.976 + 263.12-127.27

s = 210m

To learn more about acceleration use link below:

https://brainly.com/question/460763

#SPJ4

When the amplitude of the wave is reduced back to 5V and the trigger slope polarity is switched from '+' to '-', the scope will still trigger at 2.5V. The phase of the wave when the scope is triggered will be changed from 30 degrees to 180-30=150 degrees. So, the values of V and t when the scope is triggered will be V=2.5V and t=150 degrees.

An oscilloscope trigger determines the starting point of the waveform trace on the screen. In this problem, a sine wave with an amplitude of 5V and a frequency of 5kHz is being displayed. The trigger is set to start the trace when the voltage is 2.5V and the phase is 30 degrees. If the amplitude is reduced back to 5V and the trigger slope polarity is switched from "+" to "-", the trigger level remains the same at 2.5V. Hence, the scope will still trigger when the voltage is 2.5V. The phase at which the scope is triggered can be found using the formula for a sine wave and the inverse sine function.

Learn more about radio waves here: brainly.com/question/21995826

#SPJ4

Magnitudes of the two charges are approximately 3.96 μC and 27.04 μC.

The physical property of matter that causes that matter to experience force when placed in an electromagnetic field is called electric charge.

(a) Q1 + Q2 = 31 μC = 31 x 10^-6 C

F = k * (Q1 * Q2) / r^2

k is Coulomb constant, r is distance between the charges, and F is force of repulsion.

Q1 = sqrt(F * r^2 / k * Q2)

Q2 = sqrt(F * r^2 / k * Q1)

Q1 = sqrt(0.1572 N * (3.1 m)^2 / (8.99 x 10^9 N m^2/C^2) * 31 x 10^-6 C) = sqrt(15.75) μC = 3.96 μC

Q2 = 31 x 10^-6 C - Q1 = 31 x 10^-6 C - 3.96 x 10^-6 C = 27.04 x 10^-6 C = 27.04 μC

So, the magnitudes of the two charges are approximately 3.96 μC and 27.04 μC.

To know more about charges, refer

https://brainly.com/question/1121280

#SPJ4

The number of poles per phase in the stator of a three-phase squirrel-cage motor can be determined from its full-load speed and the frequency of the line it is connected to.

The full-load speed of a three-phase squirrel-cage motor is the speed at which the motor operates when it is loaded to its maximum rated capacity. The frequency of the line it is connected to is the frequency of the alternating current (AC) power supply that it is using.

The relationship between the speed of a three-phase motor and its frequency and number of poles can be determined using the following formula:

Speed (in RPM) = (120 * frequency) / number of poles

Using the given information, we can calculate the number of poles in the stator as follows:

870 RPM = (120 * 60 Hz) / number of poles

Solving for the number of poles, we get:

number of poles = (120 * 60 Hz) / 870 RPM = 8 poles per phase

To learn more about speed, visit:

https://brainly.com/question/28224010#

#SPJ11

As the physical spacing of the distance between water molecules changes, the density of the water may change too.

A substance's density is determined by how much mass it has per unit of volume. In other words, it is a measure of how much matter is contained in a certain amount of space. The density of a substance can be influenced by various factors, including temperature and pressure. In the case of water, changes in temperature can lead to changes in the physical spacing between water molecules. When water is heated, the individual water molecules begin to move more quickly, which increases the average distance between them. This increase in the space between the water molecules leads to a decrease in the overall density of the water. As a result, hot water is less dense than cold water. Conversely, when water is cooled, the individual water molecules slow down, which decreases the average distance between them. This decrease in the space between the water molecules leads to an increase in the overall density of the water. As a result, cold water is more dense than hot water. In summary, as the physical spacing of the distance between water molecules changes, the density of the water may change too. This relationship between temperature and density is one of the unique properties of water that is critical to many biological and ecological processes.

To know more about density please refer: https://brainly.com/question/29775886

#SPJ4

Radio waves, Microwaves, Infrared radiation, Visible light, Ultraviolet radiation, X-rays, Gamma rays are 7 types of electromagnetic waves from lowest to highest wavelength.

The energy levels, wavelengths, and frequencies of the photons that make up each region of the electromagnetic (EM) spectrum are distinctive. The strongest, shortest, and most energetic gamma rays are also the most energetic. As opposed to other forms of EM radiation, radio waves have the lowest energy, the longest wavelengths, and the lowest frequencies. The parts of the electromagnetic spectrum are designated as follows, from highest to lowest energy: gamma rays, X-rays, ultraviolet radiation, visible light, infrared radiation, and radio waves. The radio wave region of the electromagnetic wave spectrum includes microwaves (such as those found in microwave ovens).

Learn more about electromagnetic wave

brainly.com/question/29774932

#SPJ4

The direction of a vector can be different in different coordinate systems. So the statement is true.

The direction of a vector is characterized as the line that goes from the starting point to the terminal point of the vector. In various coordinate frameworks, a similar vector might have different starting and terminal points, and hence, various directions.

The direction of a vector is compared with the coordinate framework used to address it. In this way, a vector might have an alternate direction in one coordinate framework contrasted with another.

The greatness of a vector is a scalar worth that addresses the length of the vector and is free of the coordinate framework used to manage it.

To learn more about the direction of a vector:

https://brainly.com/question/27854247

#SPJ4

The largest net driving force is determined by comparing the magnitude of all force acting on a system and choosing the one with the greatest value.

The largest net driving force is a crucial concept in physics and thermodynamics. It refers to the net force that drives the change in a system, such as chemical reactions or physical processes.

The magnitude of all forces acting on a system, such as friction, gravity, or pressure, must be compared to determine the largest net driving force. The force with the greatest value is considered to be the largest net driving force and will have the most significant effect on the system.

To know more about Force, click here.

https://brainly.com/question/13191643

#SPJ4

Answer:

A 1-kg mass is at rest and a 2-kg mass slides towards it at 1m/s on an air track. They collide and stick. The combined mass moves at: 1.5m/s.

A 5000-kg freight car moving at 2m/s collides with a 10,000-kg freight car at rest. They couple upon collision and move away at 2m/s: None of these.

These are examples of elastic collisions in which the total momentum is conserved. The final velocity of the combined mass can be calculated using the conservation of momentum equation.

Explanation:

The frequency of an x-ray having a wavelength of 2.5×10⁻⁷ cm is 1.2×10¹⁷ Hz

We'll begin by converting the value of the wavelength from cm to m. Details below:

100 cm = 1 m

Therefore

2.5×10⁻⁷ cm = (2.5×10⁻⁷ cm × 1 m) / 100

2.5×10⁻⁷ cm = 2.5×10⁻⁹ m

Finally, we shall determine the frequency of the x-ray. This is shown below:

Velocity (v) = wavelength (λ) × frequency (f)

3×10⁸ = 2.5×10⁻⁹ × frequency

Divide both sides by 2.5×10⁻⁹

Frequency = 3×10⁸ / 2.5×10⁻⁹ m

Frequency = 1.2×10¹⁷ Hz

Thus, from the above calculation, we can conclude, the frequency is1.2×10¹⁷ Hz

Learn more about frequency:

https://brainly.com/question/15326129

#SPJ1

True, mornings are often considered the best time to study for some people as they tend to have the most energy and focus during this time. Additionally, starting the day with productive activities like studying can set a positive tone for the rest of the day.

There are many productive activities that can be done in the morning, including:

Exercise: This can help you start the day with more energy and focus.

Meditation or mindfulness practice: This can help you clear your mind and feel more relaxed and focused for the day ahead.

Planning and goal-setting: This can help you prioritize your tasks for the day and feel more organized.

Study or work: Dedicating the first part of your day to work or study can help you be more productive and focused on your tasks.

Reading: This can help you learn new things, improve your vocabulary, and start the day with a positive and stimulating experience.

To know more about vocabulary, visit:

brainly.com/question/24702769

#SPJ1

The first law of thermodynamics, also known as the law of conservation of energy, states that energy cannot be created or destroyed, only transformed from one form to another. This law applies to all energy conversion processes, including the operation of an electric resistance heater.

An electric resistance heater works by converting electrical energy into heat energy. The heater consists of a heating element, typically made of metal, that is heated by the flow of electricity through it. The heater element then radiates heat into the surrounding environment, increasing the temperature of the room.

In this process, the electrical energy input to the heater (5 kWh in this case) must equal the energy output in the form of heat. The efficiency of the electric resistance heater, which is defined as the ratio of the useful energy output to the energy input, will be less than 100%. This means that not all of the electrical energy is converted to heat, and some energy is lost as heat to the surroundings, or in the form of other types of energy, such as light or sound.

Therefore, it is not possible for an electric resistance heater to consume 5 kWh of electricity and supply 6 kWh of heat to a room. The amount of heat supplied by the heater will always be less than the amount of electricity consumed by the heater. To determine the exact amount of heat supplied, one would need to consider the efficiency of the heater and the conditions under which it is operating.

In conclusion, the law of conservation of energy states that energy cannot be created or destroyed, and this law applies to the operation of electric resistance heaters. The amount of heat supplied by an electric resistance heater will always be less than the amount of electricity consumed by the heater, due to losses in the energy conversion process.

No, it is not possible for an electric resistance heater to consume 5 kWh of electricity and supply 6 kWh of heat to a room.

kWh stands for kilowatt-hours and is a unit for measuring energy. It is a unit of energy equivalent to 1,000 watts of power used for one hour. For example, if you have an appliance with a power rating of 1,000 watts and it is turned on for one hour, then it has used 1 kWh of energy. kWh is often used to measure the amount of energy consumed or produced by items such as electric cars, solar panels, and other energy sources. kWh is also commonly used to measure the amount of electricity used by a household in a month.

This is because the amount of energy that is supplied to a room is always less than the amount of electrical energy consumed by the heater. This is due to energy losses due to heat transfer, radiation, convection, and other forms of energy loss.

To learn more about kWh
https://brainly.com/question/14149152
#SPJ4

The relationship between voltage and the distance from charges is given as V=kq/r.

The potential difference or voltage is given as V=kq/r. Where k is the electrostatic constant, q is the charge of the particle and r is the distance of the point from the charge. So the voltage is inversely proportional to the distance of the charge. So as the distance of the point from the charge increases, the value of voltage decreases. Voltage is measured in volts (V) where 1 volt is defined as 1 joule of energy per coulomb. Therefore, a voltage of 10 volts means it must have 10 joules of energy transferred per unit of charge passed through it.

For further learning about voltage, refer to the link:

https://brainly.com/question/12689850

#SPJ4

A smart refrigerator can use sensors to detect when you are running low on milk, and then send a reminder to you on a wireless network.

A smart refrigerator is a type of technology that utilizes sensors to monitor and manage the contents inside the refrigerator. One of its key features is the ability to detect when you are running low on a specific item, such as milk. This is done by using sensors that monitor the level of milk in the container. Once the milk level drops below a certain threshold, the refrigerator sends a reminder to you through a wireless network, such as Wi-Fi. This reminder can be in the form of an app notification, text message, or email. This helps you keep track of the items in your refrigerator and ensures that you never run out of milk unexpectedly. The smart refrigerator is a convenient and practical solution for managing your food inventory and keeping your life organized.

Find out more about Refrigerator

brainly.com/question/15385545

#SPJ4

1.27 Using VSEPR theory, the geometry of the structures can be predicted as follows:

H H CI: linear

H H-NH: trigonal pyramidal

C-6-H (b): tetrahedral

C-6-H (c): tetrahedral

1.28 Using VSEPR theory, a carbocation is trigonal planar while a carbanion is tetrahedral. This is because in a carbocation, the positive charge creates a highly polarized atom and repels the electrons, causing them to form a planar shape. In a carbanion, the negative charge attracts the electrons, causing them to form a tetrahedral shape.

1.29 VSEPR theory predicts that there will be a change in bond angles when ammonia is converted into an ammonium ion. In ammonia, the nitrogen atom is bonded to three hydrogen atoms, forming a trigonal pyramid geometry. However, in the ammonium ion, the nitrogen atom is bonded to a hydrogen ion, which changes the geometry to tetrahedral.

1.30 Using VSEPR theory, the silicon atom in trimethylhydroxysilane is tetrahedral. This is because the silicon atom is bonded to four different atoms (one oxygen and three carbon atoms), causing the electrons to form a tetrahedral shape.

Learn more about VSERP theory here: brainly.com/question/14992767

#SPJ4

The largest distance that can be measured with an instrument that can measure a minimum of 1 mm is 0.000001 km x the range of the instrument.

The largest distance that can be measured with an instrument that can measure a minimum of 1 mm is determined by the range of the instrument. If the smallest distance that can be measured is 1 mm, the largest distance that can be measured can be calculated by multiplying the minimum measurement by the number of units in the desired unit.

To convert millimeters to kilometers, divide by 1 million:

1 mm * (1 km / 1,000,000 mm) = 0.000001 km is the largest distance that could be measured.

You can learn more about distances at

https://brainly.com/question/17273444

#SPJ4

Therefore, the acceleration of the particle when t=pi is -5.

Acceleration is the rate at which an object's speed or direction changes. It is a vector quantity, meaning it has both a magnitude and a direction. Acceleration is the change in velocity divided by the change in time and is usually represented by the equation a=Δv/Δt. Acceleration is usually measured in meters per second squared (m/s2). When an object's speed is increasing, the acceleration is positive, and when the speed is decreasing, the acceleration is negative.

The acceleration of the particle when t=pi is -5.

This is because the acceleration of a particle at a given time t is the second derivative of its position x(t) with respect to time. Therefore, the acceleration at t=pi is calculated as follows:

a(t) = d2x/dt2 = d/dt[sin(2t) - cos(3t)]

= 2cos(2t) + 9sin(3t)

= 2cos(2*pi) + 9sin(3*pi)

= -2 + 0

= -2

Therefore, the acceleration of the particle when t=pi is -5.

To learn more about  acceleration

https://brainly.com/question/460763

#SPJ4

Masses of gray matter deep within the cerebrum that inhibit motor activity are the basal ganglia.

The basal ganglia are a group of nuclei located deep within the cerebrum that play a crucial role in motor control and regulation. They are responsible for inhibiting motor activity and play a key role in the smooth and coordinated execution of movements. The basal ganglia work in conjunction with other brain regions, such as the motor cortex and thalamus, to regulate movement and help ensure that movements are smooth, purposeful, and well-coordinated. Dysfunction of the basal ganglia is associated with a number of movement disorders, such as Parkinson's disease and Huntington's disease.

To know more about cerebrum please refer: https://brainly.com/question/13024540

#SPJ4

It serves its purpose to state that charged materials contain differing levels of both protons and electrons. Transaction to take place have an imbalanced charge.

either more positive protons or electrons than electrons. Moreover, neutral objects have an equal quantity of protons and electrons, neutralizing overall charge.

Heated Entities as a Proton and Electron Imbalance. Transaction to take place have an imbalanced charge, either more positive protons or electrons than electrons. Additionally, neutral objects have an equal quantity of protons and electrons, neutralizing their charge.

The same principle that applies to atoms also pertains to objects. The total amount of charge on the object is determined by dividing his difference by 1.6 x 10 -19 Coulombs.

To know more about Electrons click here

brainly.com/question/12001116

#SPJ4

The magnitude of the electric field required to suspend the charged object is approximately 49,000 N/C.

Given information,

Mass = 0.0245 kg

Charge = -4.9 μC

The gravitational force acting on the object can be calculated using the formula: F = m × g

The electric force exerted on the object can be calculated using the formula: F = q × E

Force must balance the gravitational force, so:

F_gravity = F_electric

m × g = q × E

E = (m × g) / q

E = (0.0245 kg × 9.8 m/s²) / (-4.9 x 10⁻⁶ C)

E ≈ -49,000 N/C

Therefore, the magnitude of the electric field required to suspend the charged object is approximately 49,000 N/C.

Learn more about electric force, here:

https://brainly.com/question/20935307

#SPJ6

The slope of the curve to determine the velocity is 0.238 m/s.

The graph given in the question is the position versus time plot. The slope of the position versus time plot gives the velocity of the object. Firstly, we can write coordinates of the endpoint of the graph as (0.00,2.50) and (70.0,19.0) as shown in the figure below.

The slope of the line is obtained as,

V=19.0 m-2.50 m/70.0 - 0.00 s=0.2375 m/s

≈ 0.238 m/s

Since position and time are almost directly proportional, so the corresponding slope (velocity) would remain constant throughout the motion. This implies that velocity at any time, say at t = 30 s, will be equal to the slope of the position-time graph.

Learn more about velocity:

brainly.com/question/80295

#SPJ4

Complete ques is

Using approximate values, calculate the slope of the curve in the given figure to verify that the velocity at t = 30.0 s is 0.238 m/s. Assume allvalues are known to 3 significant figures.

Answer:

The electric force between the two charges is given by Coulomb's Law:

F = k * q1 * q2 / r^2

Where:

k = Coulomb constant = 8.99 x 10^9 N * m^2 / C^2

q1 = 140.0 C

q2 = 240.0 C

r = 2.00 km = 2.00 x 10^3 m

F = k * 140.0 * 240.0 / (2.00 x 10^3)^2

F = 1.7 x 10^9 N

So, the electric force on the top charge is 1.7 x 10^9 N.

Explanation:

The magnitude of electric field is Four times.

When charge is present in any form, a point in space has an electric field that is connected to it. The value of E, often known as the electric field strength, electric field intensity, or just the electric field, expresses the strength and direction of the electric field.

Without any precise information of what generated the field, simply knowing the value of the electric field at a certain location is sufficient to predict what would happen to electric charges nearby.

One charge is thought of as the source of an electric field that spreads outward into the surrounding space, and the force exerted by that field is regarded to be the electric force rather than the direct interaction of two electric charges separated in space.

Therefore, The magnitude of electric field is Four times.

To learn more about Electric field, refer to the link:

https://brainly.com/question/15800304

#SPJ1

1957 Porsche has a fast rate of acceleration than Electric Speedster.

Acceleration is defined as the rate of change of velocity with respect to time. Mathematically, we can write -

{a} = Δv/vt

{a} = [tex]\lim_{\;t \to \infty}[/tex] Δv/vt

{a} = dv/dt                             ... Eq { 1 }

Given is that -

For a 1957 Porsche -

{a} = 30/0.00063

{a₁} = 47620 m/h²

For a Electric Speedster -

{a₂} = 12.5/0.0011

{a₂} = 11364 m/h²

{a₁} > {a₂}

Therefore, 1957 Porsche has a fast rate of acceleration than Electric Speedster.

To solve more questions on Acceleration, visit the link below-

brainly.com/question/1041084

#SPJ1

A switch must be always connected to the circuit to prevent the current through the appliances. Otherwise all the connections goes live.

Electrical switches are safety devices used to on and off the current flow through the appliances. A switch or a fuse's function is to open or close an electric circuit, however in a home, they must be properly wired.

A switch or a fuse is always attached to the live wire in an electrical circuit to ensure that the socket or appliance is not live when it is shut off.

The electrical appliance is still linked to the high voltage live wire if the switch or fuse is installed in the neutral wire, even if it is open or the fuse has blown. If the user contacted the interior of the device as a result, they may receive an electric shock.

Find more on electrical switches:

https://brainly.com/question/2201104

#SPJ1

4.06 × 10¹⁶ electrons passes through your skin if you are exposed to 5 ma current for 1.3 seconds.

According to the definition of electric current, 1 ampere electric current is the 1 coulomb charge passing through the conductor in 1 second. 1 coulomb charge contains 6.241 x 10¹⁸ electrons. So,

5 ma current flow means 5 × 1 × 10⁻³ C charge flows in 1 second.

So, the charge flows in 1.3 sec, = 5 × 10⁻³ × 1.3 = 6.5 × 10⁻³

Number of electrons pass in 1.3 seconds, n = 6.5 × 10⁻³ × 6.241 x 10¹⁸

n = 4.06 × 10¹⁶ electrons

To know more about Coulomb, here

brainly.com/question/12498766

#SPJ4

"A highly skilled" type of labor force might a pottery factory want to focus on when hiring. It is because skill and experience are crucial for a pottery factory.

Labor is a production force that refers to the work that people do to produce goods and services. It contains all physical and mental efforts expended in the production of goods and services.

Pottery is the process and products of shaping vessels and other objects out of clay and other ceramic materials and firing them at high temperatures to give them a hard and durable shape. In a pottery factory, a variety of techniques are required to form pottery. Therefore, a highly skilled labor is needed.

Skilled labor is defined as job that necessitates extensive training and experience. Skilled labor is frequently found in jobs requiring a high level of skill. In a pottery factory, for example, in throwing process. In throwing process, the wheel spins as a solid ball of soft clay is gently pressed, squeezed, and pulled upwards and outwards into a hollow shape. A skill and experience are needed to throw pots of an acceptable standard.

Here to learn more about Highly Skilled Labor:

https://brainly.com/question/29214904

#SPJ4