Using the drop-down menus, correctly complete the sentences about run-time errors.

A programmer can test the code to find run-time errors by
✔ running the code with extreme values.
A Beta version of a program is one that is
✔ nearly ready for release and has Beta users to test the program.
Prior to release, programmers can test a program by
✔ running it with extreme input.

nobody answering these y'all welcome spending hard earned points

When going through the VLAN configurations numbered 1002-1005  which are not in use. what to do? The best course of action is to remove VLANs numbered 1002-1005.

These VLANs are part of the default VLANs and are not usable for normal use. VLANs 1002 through 1005 are the FDDI defaults, Token Ring defaults, and FDDI and Token Ring defaults for VLAN 1, respectively. None of these VLANs may be removed.VLANs are created and deleted using the VLAN configuration subcommand of the switch. VLAN IDs range from 1 to 4094, and not all numbers are created equal. These numbers are reserved for special purposes or are predefined by the IEEE. VLANs that are not in use should be removed, and VLANs that are in use should not be removed to maintain a clean and concise VLAN configuration. For proper VLAN configuration, users must define the VLAN's name, description, and ID number. VLANs can also be added to other switch configurations such as interfaces, IP addressing, and security policies.

Learn more about VLAN here: https://brainly.com/question/28635096

#SPJ11

To write a program that reads a file "data.in" of any type (exe, pdf, doc, etc) and then copies its content to another file "data.out" successfully opened by the respective program, the following code may be written with binary file read/write:```c#include
using namespace std;
int main() {
   string fileName = "data.in";
   string outFileName = "data.out";
   ifstream inputFile(fileName, ios::binary | ios::ate);
   int size = inputFile.tellg();
   inputFile.seekg(0, ios::beg);
   ofstream outputFile(outFileName, ios::binary);
   char* buffer = new char[size];
   inputFile.read(buffer, size);
   outputFile.write(buffer, size);
   delete[] buffer;
   inputFile.close();
   outputFile.close();
   return 0;
Executing the program: Run the program as you would any other C++ program in the command prompt by following these steps:

1. Make sure you have a C++ compiler installed on your computer (such as gcc).

2. Save the code to a file with the ".cpp" file extension (such as "filecopy.cpp").

3. Open the command prompt and navigate to the directory where the code file is located.

4. Type "g++ filecopy.cpp -o filecopy" and press enter.

5. Type "filecopy" and press enter.

To learn more about "program", visit: https://brainly.com/question/31137060

#SPJ11

The data that should only be input once on your spreadsheet are ideally the data that are repeated multiple times. The "one source of truth" principle refers to this.

A spreadsheet is a piece of software that is used to tabulate, organise, and analyse data. Data entry, manipulation, and analysis are all possible using a grid of rows and columns. Spreadsheets are frequently used in business, finance, accounting, and other fields where it is necessary to swiftly organise and analyse huge volumes of data.

Data can be sorted, filtered, and examined in a spreadsheet using a variety of tools, such as formulae, functions, and charts. With programming techniques like macros, it is also possible to automate routine processes. Spreadsheets are a crucial tool for data analysis and decision-making because they allow users to base their choices on correct and current data.

Learn more about spreadsheet here:

https://brainly.com/question/28910031

#SPJ4

In Arduino, binary representations of signed and unsigned integer expressions are used to compare them.

A signed data type in computer programming is one that can hold both positive and negative values. The leftmost bit is often used to denote the sign, with 0 denoting a positive value and 1 denoting a negative one. The value's magnitude is represented by the remaining bits. The two types of signed data are integer and floating point. In some applications, like financial calculations or temperature readings, where negative values are expected, the usage of signed data types is crucial. To prevent problems like overflow or underflow, which happen when a value is either too large or too tiny to be represented by the available bits, attention must be given while working with signed values.

Learn more about signed here:

https://brainly.com/question/30652432

#SPJ4

Here are some computer science terms that are commonly confusing:

Computer science is a vast field that involves a lot of technical terms and jargon, and some of these terms can be confusing for people who are new to the field or unfamiliar with its terminology.

Therefore, Algorithm: A set of instructions or a procedure used to solve a problem or complete a task. It is often compared to a recipe or a formula.

API: Application Programming Interface - a set of protocols, tools, and functions used to build software applications.

Byte: A unit of digital information that consists of eight bits. It is the smallest addressable unit of memory in most computer systems.

Cache: A temporary storage location in a computer's memory or on a hard drive that is used to speed up access to frequently used data.

Read more about computer science here:

https://brainly.com/question/20837448

#SPJ1

To configure the CA on your single server running Windows Server 2016 Enterprise edition, the first step is to add the Active Directory Certificate Services role and install the server as a standalone root CA. Joining the computer to the domain is not necessary in this case. So, the correct option is D.

Add the Active Directory Certificate Services role and install the server as a standalone root CA to configure the CA. Auto-enrollment is a feature that is available for Windows clients running Windows 2000 or later. It automates the enrollment and issuance process, reducing administrative overhead and increasing the security of the PKI. A PKI is a set of hardware, software, policies, and procedures that provide cryptographic services to secure the electronic transfer of information.

When the certificate authority is added, the certificate enrollment policy can be configured to enroll and automatically re-enroll certificates to clients for identification, authentication, and authorization purposes. PKI certificates include information such as the public key, the holder’s name, the issuer’s name, and a validity period.

You can learn more about Windows Server 2016 at: brainly.com/question/14587803

#SPJ11

In order to deliver a single video stream to multiple receivers with minimal network traffic, the Vialom network should use a multicast address.

What is multicast?

Multicast refers to a communication mechanism in which data is sent from one sender to multiple recipients at the same time. The sender only sends a single data packet, which is then sent to a subset of all connected devices that have requested the specific stream. This stream could be audio or video. The other available options in IPv6 addresses are:

Loopback address: A loopback address is a special IP address that is used by a computer to communicate with itself. A packet that is sent to this address does not leave the computer; instead, it is routed back to the system's network stack.

: A unicast address is a unique address assigned to a single device on a network. A packet sent to a unicast address is routed to a single network device.Link-local address: A link-local address is an IPv6 address that is only valid within a particular link. It is used to communicate with devices on the same network segment. Such addresses begin with the prefix FE80::.Multicast address:

A multicast address is an IPv6 address that is used to send a single data packet to multiple recipients at the same time. Only a subset of connected devices that have requested the specific stream receive the packet. Such addresses begin with the prefix FF00::.Therefore, to deliver a single video stream to multiple receivers with minimal network traffic, the Vialom network should use a multicast address.

Learn more about   multicast address:https://brainly.com/question/30414913

#SPJ11

"Can you Graduate?" and "School's Out" both involve using logical operators and boolean variables to evaluate conditions and execute code accordingly.

Logical operators are used in programming to compare multiple conditions and evaluate them as true or false. The three main logical operators are:

1. OR (||) - returns true if at least one of the conditions is true. It evaluates from left to right and stops as soon as it finds a true condition.

2. AND (&&) - returns true only if all conditions are true. It also evaluates from left to right and stops as soon as it finds a false condition.

3. NOT (!) - negates the boolean value of the operand. If the operand is true, NOT returns false, and if the operand is false, NOT returns true.

Here are some examples of logical statements using boolean variables and operators:

bool isSunny = true;

bool isWarm = true;

if (isSunny || isWarm) {

// code to execute when either condition is true

}

bool isRaining = false;

bool isCold = false;

if (isRaining && isCold) {

// code to execute only when both conditions are true

}

bool isFinished = false;

if (!isFinished) {

// code to execute when isFinished is false

}

In 7.2.6, the program checks whether a student meets the graduation requirements based on their grades and attendance.

In 7.2.7, the program checks whether it's the last day of school based on the day of the month and the month itself. Both activities require the use of logical operators to compare and evaluate multiple conditions.

Learn more about logical operator from

https://brainly.com/question/13382096

#SPJ1

Codehs:

* Describe the meaning and usage of each logical operator: OR (||), AND (&&), and NOT (!)

* Construct logical statements using boolean variables and logical operators

Activities

7. 2. 6 Can you Graduate?

7. 2. 7 School’s Out

To write this program, you will need to create a user-defined method that will take in three parameters: month, day, and year. You can then create a boolean statement that will compare the month times the day with the year.

If the two are equal, the program should display the message for a magic date; otherwise, it should display the message for a no-magic date.

For example:

public static void magicDate(int month, int day, int year) {
   if (month * day == year) {
       System.out.println("You were born in a magic date. Hogwarts welcomes you to the School of Witchcraft and Wizardry.");
   } else {
       System.out.println("You were born in a no-magic date; the muggle world is your home");
   }
}

You can then call the method with the user's inputted values to determine the result.

To learn more about "magic date", visit:  https://brainly.com/question/31143760

#SPJ11

The category of cloud hosting where vendors provide hosted computers with an operating system, runtime environment, and middleware like a web server or a DBMS is Infrastructure as a Service (IaaS).

In IaaS, the cloud service provider offers virtualized computing resources such as virtual machines, storage, and networking infrastructure to users over the internet. This allows users to deploy and manage their own operating systems, applications, and middleware on the cloud infrastructure provided by the vendor. The vendor is responsible for the maintenance and management of the underlying hardware and infrastructure, while the user is responsible for managing the operating system, middleware, and applications.

You can learn more about Infrastructure as a Service (IaaS) at

https://brainly.com/question/13465777

#SPJ11

The command to display formulae in formula view may be found in Microsoft Excel's "Formula Auditing" group under the Formulas tab.

Microsoft Corporation created the well-known spreadsheet programme Microsoft Excel. With tools like formulae, functions, charts, and pivot tables, it enables users to organise, analyse, and manipulate data in a number of different ways. Excel has emerged as a crucial tool for organisations, researchers, and individuals for a variety of tasks, from straightforward data entry to intricate financial analysis. Excel has revolutionised the way people interact with data because to its simple interface and robust features. Also, users can add their own add-ins and macros to the programme to increase its usefulness. Excel is a standalone software or a component of the Microsoft Office package.

Learn more about Microsoft Excel here:

https://brainly.com/question/24202382

#SPJ4

A firewall and digital certificate are both useful tools for providing a level of security to an organization.

A firewall and a digital certificate are used to provide security to an organization. However, they are not the same. In this article, we will discuss how a firewall compares to a digital certificate as a means of providing a level of security to an organization.

Firewall: A firewall is a network security device that monitors and filters incoming and outgoing network traffic based on an organization's previously established security policies. Firewalls can be hardware, software, or a combination of both. The main function of a firewall is to block unauthorized access to a network.

Digital certificate: On the other hand, a digital certificate is a cryptographic file that verifies the identity of a user, system, or organization. It is used to secure online communication, and it works by binding a public key to a user's name, address, or other identifying information. This creates a digital signature that can be used to verify the identity of the person or organization that sent a message.

So, while a firewall is used to block unauthorized access to a network, a digital certificate is used to verify the identity of a person or organization that sent a message. Both of these are important security measures, but they serve different purposes. A firewall provides a level of security by controlling access to a network, whereas a digital certificate provides a level of security by verifying the identity of a user or organization.

It is recommended to use both of these measures in combination to provide optimal security to an organization.

Learn more about firewall here:

https://brainly.com/question/29869690

#SPJ11

In cases of direct transmission, a pathogen is transmitted from one host to another by physical contact or respiratory droplets, for example, via a handshake, sexual contact, or sneezing on another person.

Direct transmission occurs when there is close proximity between the infected and susceptible hosts, and the pathogen can be transferred through activities such as touching, kissing, sexual contact, or breathing in droplets expelled during coughing or sneezing. Direct transmission is an important mode of disease spread for many infectious agents and can contribute to outbreaks and epidemics.

You can learn more about Direct transmission at

https://brainly.com/question/3659861

#SPJ11

The types of traffic that are not exchange by using Remote Desktop Protocol (RDP) is d. Application data.

Remote Desktop Protocol (RDP) is a proprietary protocol developed by Microsoft to provide a graphical interface for remote access to another computer over a network connection. When a user connects to a remote desktop using RDP, they can interact with the remote computer as if they were physically present at that computer.

RDP exchanges various types of traffic between the client and server, including keystrokes, mouse movements, and display information. Keystrokes and mouse movements allow the user to interact with the remote desktop environment, while display information is used to send visual data from the remote desktop to the client computer.

Learn more about Remote Desktop Protocol here:

brainly.com/question/28903876

#SPJ11

Mortgage markets are often safer than other capital markets. Mortgages' security is the single thing that sets the mortgage markets apart from other financial markets. Loans are given by lenders in the mortgage market as collateral for mortgages.

To learn more about mortgage market, refer to:

https://brainly.com/question/29546077

As a security professional tasked with preventing fraudulent emails, the DNS records that you would configure to help you realize this goal are:

A DNS record is a type of data stored in the Domain Name System (DNS) that provides information about a specific domain name or IP address, such as its associated IP address or mail server.

As a security professional tasked with preventing fraudulent emails, the DNS records that you would configure to help you realize this goal are:

SPF (Sender Policy Framework): SPF is an email authentication method that allows the domain owners to specify which mail servers are authorized to send emails on behalf of their domain. By configuring SPF records in DNS, you can help prevent email fraud and phishing attacks.

DMARC (Domain-based Message Authentication, Reporting & Conformance): DMARC is an email authentication protocol that builds on top of SPF and DKIM to provide more robust email authentication. It allows domain owners to specify how email receivers should handle emails that fail authentication checks.

DKIM (DomainKeys Identified Mail): DKIM is another email authentication method that uses digital signatures to verify the authenticity of email messages. By configuring DKIM records in DNS, you can help prevent email fraud and phishing attacks.

Therefore, the three DNS records you should configure to prevent fraudulent emails are SPF, DMARC, and DKIM. The other two DNS records (CNAME and MX) are not directly related to preventing email fraud.

Learn more about DNS Records on:

https://brainly.com/question/30097853

#SPJ1

Full Question:

Although part of your question is missing, you might be referring to this full question:

You are a security professional tasked with preventing fraudulent emails. Which DNS records will you configure to help you realize this goal? Select three.

SPF

DMARC

DKIM

CNAME

MX

The correct answer is TCP and UDP are two transport layer protocols that are used for sending data over a network. The following three statements correctly describe their functions:

The TCP source port number identifies the sending host on the network: TCP uses a 16-bit source port field to identify the sending process or application on the host. This helps the receiving host to identify the source of the data. UDP segments are encapsulated within IP packets for transport across the network: UDP does not have any built-in error recovery mechanism, so it simply encapsulates its segments within IP packets and sends them over the network. The source port field identifies the running application or service that will handle data returning to the PC establishing a session with the server: Both TCP and UDP use the source and destination port fields to identify the applications or services that will handle the data. The source port field helps the server to identify the process or application that sent the data and establish a session with the PC. In summary, TCP and UDP are transport layer protocols that use source and destination port numbers to identify the sending and receiving hosts and the applications or services that will handle the data. UDP simply encapsulates its segments within IP packets, while TCP establishes a reliable, connection-oriented session between the hosts.

To learn more about transport layer click on the link below:

brainly.com/question/27961606

#SPJ1

The essential difference between a Finite State Machine (FSM) and a Petri Net model.

The FSM model provides a concise and intuitive representation of the internal state of a system. Petri net models, on the other hand, are mathematical models for describing concurrent and distributed systems. The Petri Net model describes the system as a set of interconnected processes that can either be in a state of enabled or disabled. The Petri Net model is represented as a bipartite graph where the states of the system are represented by circles, and the activities are represented by arcs.

To learn more about the FSM from here:

brainly.com/question/22967402

#SPJ11

The java code for the given task of finding combination of number of pebbles:

public class BucketCollection{

public static int minBuckets(int numOfPebbles, int[] bucketSizes)

{

    Arrays.sort(bucketSizes);

    int count = 0;

    for(int i=bucketSizes.length-1;i>=0;i--)

     {

        while(bucketSizes[i]<=numOfPebbles)

         {

           numOfPebbles-=bucketSizes[i];

            count++;

         }

  }

  if(numOfPebbles!=0)

   {

     return -1;

 }

  return count;

}public static void main(String args[])

{

int numOfPebbles = 5;

int[] bucketSizes = {3, 5};

System.out.println(minBuckets(numOfPebbles, bucketSizes));

}

}

Example output:1

The given java code takes in the number of pebbles, numOfPebbles, and an array of bucket sizes, bucketSizes. The output of the function minBuckets will be the minimum number of buckets required to collect exactly the number of pebbles given. The function minBuckets first sorts the bucketSizes array in descending order, so that the largest bucket sizes can be used first.Then, we check for each bucket size, if the current bucket can hold any pebbles, then we decrement the number of pebbles, numOfPebbles, and increase the count of buckets, count. This process is continued until all the pebbles have been collected, or no bucket can be found to collect the remaining pebbles.In the end, if the remaining number of pebbles is not zero, it means that there was no combination of bucket sizes to collect exactly that number of pebbles. In this case, we return -1. Otherwise, we return the count of buckets used to collect all the pebbles.

Learn more about java here: https://brainly.com/question/18554491

#SPJ11

Option C would be the best advice for Julian in preparing her profile for internships on a professional networking website.\

Teachers who have taught Julian and know her academic abilities and personal qualities can write strong and positive recommendations, which can help her stand out in the competitive internship market.

While it is true that some teachers may not be able to write strong recommendations, it is generally a good idea to ask them, as they can provide valuable insights into her skills and character.

Option A and D are not helpful as they do not offer any actionable advice and may even discourage Julian from seeking recommendations.

Read more about networking here:

https://brainly.com/question/1027666

#SPJ1

The two GRE characteristics are:  (a) It includes flow-control mechanisms by default. (d) GRE encapsulation uses a protocol-type field in the GRE header to support the encapsulation of any OSI layer 3 protocol.

The full form of GRE is Generic Routing Encapsulation. GRE is a tunneling protocol that is used to transport different types of packets over a network. GRE headers and IP tunneling headers combine to create at least 24 bytes of extra overhead for tunneled packets. The following are some of the characteristics of GRE:

GRE includes flow control mechanisms that enable congestion avoidance in environments where GRE tunnels carry traffic over congested links.GRE encapsulation uses a protocol-type field in the GRE header to support the encapsulation of any OSI layer 3 protocol.

GRE does not provide strong security mechanisms to protect its payload. GRE headers are not encrypted and can be read by anyone on the network. GRE tunnels are often used with encryption mechanisms to improve security. GRE is used to tunnel any OSI Layer 3 protocol. GRE does not have any limits on the type of data that can be encapsulated. It is used to tunnel IPv4 and IPv6 packets. GRE also supports multicast, which allows it to tunnel packets to multiple destinations. GRE has a very low overhead and can be used in many different environments. GRE is widely used in MPLS networks and other types of VPN networks.

To learn more about "gre characteristics", visit: https://brainly.com/question/31143835

#SPJ11

The correct answer is All of the games described above could be modeled using the Player interface, but the game that is the least suitable for having the competitor classes implement the given Player interface is the game of Chess.

The reason for this is that in Chess, each player has a set of pieces on the board that can move according to a complex set of rules, depending on the type of piece and the position of other pieces on the board. In contrast, the Player interface provides only a simple method for getting a move, which returns an integer representing the chosen move, and a method for updating the display of the game. While it is possible to represent Chess using the Player interface, it would require a significant amount of additional logic to map the integer returned by the getMove() method to a valid move in the game of Chess, and to ensure that the move follows the rules of the game. In the other games, the moves are much simpler and can easily be represented by an integer. In the High-Low Guessing Game, the integer represents the guessed number. In Chips, the integer represents the number of chips to remove. In Tic-Tac-Toe, the integer represents the position on the 3x3 grid. And in Battleships, the integer represents the location on the opponent's grid to target. In summary, while it is possible to represent Chess using the Player interface, it is the least suitable game for having competitor classes implement the interface due to its complexity and the need for additional logic to ensure valid moves.

To learn more about games described click on the link below:

brainly.com/question/30354176

#SPJ1

Dylan should choose a programming language that is versatile and accessible across multiple platforms. Some options that would be suitable for this project include C++.

The best programming language for developing software that could run on a laptop, a smartphone, and a video game console is C++.

In computing, C++ is a high-level programming language. C++ is an object-oriented programming (OOP) language that is used to build dynamic software applications, high-performance video games, complex web applications, and many more.

C++ is the most frequently utilized programming language for building software for several platforms, including mobile and desktop devices. C++ also supports lower-level software, which enables developers to create software that is close to the hardware and runs more efficiently.

C++ is one of the most adaptable programming languages available, making it a go-to language for software developers.The characteristics that make C++ ideal for building software that works on laptops, smartphones, and gaming consoles are as follows:C++ is efficient in terms of speed.C++'s object-oriented approach.C++ is adaptable.C++'s capacity to construct low-level software.C++ has a vast library.

To learn more about programming, click here:

https://brainly.com/question/16936315

#SPJ11

To verify the TCP/IP protocols, when examining the TCP header segment, the field in a TCP segment that one should check in order to get a sense of the limit of the maximum bytes of data that a computer can receive before returning an acknowledgment is the Window size.

The Jaylabs- Jaylabs is a high-tech firm located in India. It primarily provides an extensive range of software development services. It employs cutting-edge technology and adheres to the latest trends in software development to provide its clients with the best results.

Protocol- The protocol is a collection of rules that governs data communications. Protocols make it easier for different hardware and software to communicate with one another.

TCP- TCP stands for Transmission Control Protocol. It is one of the fundamental protocols used for communication over the internet. TCP is responsible for ensuring that the packets of data sent between the sender and the receiver are received securely, accurately, and in the correct order.

TCP/IP protocols are among the most commonly used protocols in data communications. They are responsible for transmitting data between devices connected to a network. The TCP header segment is the part of the TCP/IP protocol that defines how the data should be sent between devices.

In this scenario, the window size field should be checked to get an idea of the maximum bytes of data that a computer can receive before returning an acknowledgment.

Therefore, the correct answer is window size.

To learn more about "jaylabs internet solutions", visit: https://brainly.com/question/31143472

#SPJ11

To identify all of the one-to-many relationships in the database as well as the field used in both tables to make the connection using the following pattern found in SQL when connecting two tables using the WHERE or INNER JOIN clause in Access, open the Relationships window. Given that an example of one of the relationships is given as a guide, the other relationships can be recognized with the help of the ER Diagram or Table Relationships.

The ER Diagram is a logical or conceptual representation of an enterprise's data. It is used to depict the various connections between tables or entities in the system. For each pair of tables that are linked in a one-to-many relationship, the table on the 'one' side should be listed first, followed by the table on the 'many' side.

Access allows the creation of relationships between tables or entities. The Relationships window allows you to see how the various tables in a database are connected. Relationships are formed based on one or more fields that link two tables. These links are formed by selecting the relevant field in each table that is shared between the two tables in the Relationships window. Here is the pattern:

Table1 INNER JOIN Table2 ON Table1.

Field1 = Table2.

Field1

For Example, let's say we have a table of Customers and a table of Orders, where the CustomerID is the field that links the two tables. Here are the relationships:

Here's the SQL:

Learn more about SQL: https://brainly.com/question/29216782

#SPJ11

The Route 53 policies that allow you to a) route data to a second resource if the first is unhealthy, and b) route data to resources that have better performance are Failover Routing and Latency-based Routing.

Amazon Route 53 is a domain name system (DNS) that provides a wide range of domain name services. It was released in 2010 by Amazon Web Services (AWS) as a part of their cloud computing platform. Amazon Route 53 assists in routing user requests to AWS infrastructure, which provides users with a dependable and scalable way to direct web traffic.AWS Route 53 policiesFailover Routing and Latency-based Routing are two of Route 53's routing policies.

This routing policy is used to forward the users to the desired destination if the primary resource fails or becomes unavailable. When users are directed to the AWS service that provides the lowest possible latency, a Latency-Based routing policy is utilized. This policy is beneficial when you have several resources that deliver similar features but are located in different AWS regions. You can use this routing policy to improve the performance of the system by routing users to the region that provides the lowest possible latency.

You can learn more about Amazon Web Services at: brainly.com/question/14312433

#SPJ11

To connect to a ring that is already installed we need to install the app then set up a device and then show the ring for the doorbell and click okay.  

To connect to a ring doorbell that is already installed, follow the steps below:

Download and install the Ring App to your mobile device.

After that, open the Ring App on your mobile device. Tap the “Set Up a Device” option on the welcome screen of the app.

After that, press “Doorbells” and then “Ring Video Doorbell” from the list of devices. Choose “Standard Setup” from the drop-down menu, then enter the Wi-Fi credentials when asked.

Select “Continue” and wait for the app to link to the Ring Video Doorbell, which may take a few minutes.Wait for the Ring Video Doorbell to connect to the Wi-Fi network once it has connected. Ring Video Doorbell is now connected and ready to use after that.

For such more question on device:

https://brainly.com/question/28498043

#SPJ11

To write a Java program in that conditions you will need to use the following concepts:

You can use the following Java code to read a small password and then offer two options:

Then you can use the ASCII codes of each letter of the name and the password to perform the XOR operations and encrypt/decrypt the name. After that, you can save the encrypted information to a file and load it again when needed.

Learn more about ASCII code https://brainly.com/question/18844544

#SPJ11

The contract between Kadija and Fenil is known as executory.

An executory contract is one in which both parties have made promises to each other, but one or both of them have not yet performed their obligations under the contract.

In this case, Kadija has promised to build a computer for Fenil, and Fenil has promised to pay $300.

However, Kadija has not yet delivered the computer, so the contract remains executory until she fulfills her obligation to deliver the computer to Fenil.

Read more about contracts here:

https://brainly.com/question/2669219

#SPJ1

WPA2 replaces WEP with a stronger security standard that features changing encryption keys. Correct option is C.

WEP (Wired Equivalent Privacy) is an encryption protocol used to secure wireless networks. However, it has significant vulnerabilities that make it easy to crack. WPA2 (Wi-Fi Protected Access II) is a more secure protocol that uses Advanced Encryption Standard (AES) encryption and includes periodic changing of encryption keys. This makes it more difficult for hackers to access the network and steal information.

AUP, UTM, VPN, and TLS are other security-related specifications, but they do not specifically replace WEP with a stronger security standard.

Thus, correct option is C.

You can learn more about WEP (Wired Equivalent Privacy) at

https://brainly.com/question/13068626

#SPJ11